gta02: Add bt power management device
authorLars-Peter Clausen <lars@metafoo.de>
Mon, 17 May 2010 18:19:36 +0000 (20:19 +0200)
committerLars-Peter Clausen <lars@metafoo.de>
Mon, 17 May 2010 18:59:38 +0000 (20:59 +0200)
arch/arm/mach-s3c2440/Makefile
arch/arm/mach-s3c2440/gta02-pm-bt.c [new file with mode: 0644]
arch/arm/mach-s3c2440/mach-gta02.c

index c85ba32..dc4665a 100644 (file)
@@ -33,7 +33,8 @@ obj-$(CONFIG_ARCH_S3C2440)    += mach-smdk2440.o
 obj-$(CONFIG_MACH_NEXCODER_2440) += mach-nexcoder.o
 obj-$(CONFIG_MACH_AT2440EVB) += mach-at2440evb.o
 obj-$(CONFIG_MACH_MINI2440) += mach-mini2440.o
-obj-$(CONFIG_MACH_NEO1973_GTA02) += mach-gta02.o
+obj-$(CONFIG_MACH_NEO1973_GTA02) += mach-gta02.o \
+       gta02-pm-bt.o \
 
 # extra machine support
 
diff --git a/arch/arm/mach-s3c2440/gta02-pm-bt.c b/arch/arm/mach-s3c2440/gta02-pm-bt.c
new file mode 100644 (file)
index 0000000..5cf35d8
--- /dev/null
@@ -0,0 +1,259 @@
+/*
+ * Bluetooth PM code for the Openmoko Freerunner GSM Phone
+ *
+ * (C) 2007 by Openmoko Inc.
+ * Author: Harald Welte <laforge@openmoko.org>
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/rfkill.h>
+#include <linux/slab.h>
+
+#include <linux/err.h>
+
+#include <mach/gpio-fns.h>
+
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+
+#include <mach/gta02.h>
+
+#include <linux/regulator/consumer.h>
+
+#define DRVMSG "Openmoko Freerunner Bluetooth Power Management"
+
+struct gta02_pm_bt_data {
+       struct regulator *regulator;
+       struct rfkill *rfkill;
+       int pre_resume_state;
+};
+
+static ssize_t bt_read(struct device *dev, struct device_attribute *attr,
+                      char *buf)
+{
+       int ret = 0;
+       if (!strcmp(attr->attr.name, "power_on")) {
+               if (s3c2410_gpio_getpin(GTA02_GPIO_BT_EN))
+                       ret = 1;
+       } else if (!strcmp(attr->attr.name, "reset")) {
+               if (s3c2410_gpio_getpin(GTA02_GPIO_BT_EN) == 0)
+                       ret = 1;
+       }
+
+       if (!ret) {
+               return strlcpy(buf, "0\n", 3);
+       } else {
+               return strlcpy(buf, "1\n", 3);
+       }
+}
+
+static void __gta02_pm_bt_toggle_radio(struct device *dev, unsigned int on)
+{
+       struct gta02_pm_bt_data *bt_data = dev_get_drvdata(dev);
+
+       dev_info(dev, "__gta02_pm_bt_toggle_radio %d\n", on);
+
+       bt_data = dev_get_drvdata(dev);
+
+       s3c2410_gpio_setpin(GTA02_GPIO_BT_EN, !on);
+
+       if (on) {
+               if (!regulator_is_enabled(bt_data->regulator))
+                       regulator_enable(bt_data->regulator);
+       } else {
+               if (regulator_is_enabled(bt_data->regulator))
+                       regulator_disable(bt_data->regulator);
+       }
+
+       s3c2410_gpio_setpin(GTA02_GPIO_BT_EN, on);
+}
+
+
+static int bt_rfkill_set_block(void *data, bool blocked)
+{
+       struct device *dev = data;
+
+       __gta02_pm_bt_toggle_radio(dev, !blocked);
+
+       return 0;
+}
+
+static const struct rfkill_ops gta02_bt_rfkill_ops = {
+       .set_block = bt_rfkill_set_block,
+};
+
+
+static ssize_t bt_write(struct device *dev, struct device_attribute *attr,
+                       const char *buf, size_t count)
+{
+       unsigned long on = simple_strtoul(buf, NULL, 10);
+       struct gta02_pm_bt_data *bt_data = dev_get_drvdata(dev);
+
+       if (!strcmp(attr->attr.name, "power_on")) {
+               rfkill_set_sw_state(bt_data->rfkill, on ? 1 : 0);
+
+               __gta02_pm_bt_toggle_radio(dev, on);
+       } else if (!strcmp(attr->attr.name, "reset")) {
+               /* reset is low-active, so we need to invert */
+               s3c2410_gpio_setpin(GTA02_GPIO_BT_EN, on ? 0 : 1);
+       }
+
+       return count;
+}
+
+static DEVICE_ATTR(power_on, 0644, bt_read, bt_write);
+static DEVICE_ATTR(reset, 0644, bt_read, bt_write);
+
+#ifdef CONFIG_PM
+static int gta02_bt_suspend(struct platform_device *pdev, pm_message_t state)
+{
+       struct gta02_pm_bt_data *bt_data = dev_get_drvdata(&pdev->dev);
+
+       dev_dbg(&pdev->dev, DRVMSG ": suspending\n");
+
+       bt_data->pre_resume_state = s3c2410_gpio_getpin(GTA02_GPIO_BT_EN);
+       __gta02_pm_bt_toggle_radio(&pdev->dev, 0);
+
+       return 0;
+}
+
+static int gta02_bt_resume(struct platform_device *pdev)
+{
+       struct gta02_pm_bt_data *bt_data = dev_get_drvdata(&pdev->dev);
+       dev_dbg(&pdev->dev, DRVMSG ": resuming\n");
+
+       __gta02_pm_bt_toggle_radio(&pdev->dev, bt_data->pre_resume_state);
+       return 0;
+}
+#else
+#define gta02_bt_suspend       NULL
+#define gta02_bt_resume                NULL
+#endif
+
+static struct attribute *gta02_bt_sysfs_entries[] = {
+       &dev_attr_power_on.attr,
+       &dev_attr_reset.attr,
+       NULL
+};
+
+static struct attribute_group gta02_bt_attr_group = {
+       .name   = NULL,
+       .attrs  = gta02_bt_sysfs_entries,
+};
+
+static int __init gta02_bt_probe(struct platform_device *pdev)
+{
+       struct rfkill *rfkill;
+       struct regulator *regulator;
+       struct gta02_pm_bt_data *bt_data;
+       int ret;
+
+       dev_info(&pdev->dev, DRVMSG ": starting\n");
+
+       bt_data = kzalloc(sizeof(*bt_data), GFP_KERNEL);
+       dev_set_drvdata(&pdev->dev, bt_data);
+
+       regulator = regulator_get(&pdev->dev, "BT_3V2");
+       if (IS_ERR(regulator))
+               return -ENODEV;
+
+       bt_data->regulator = regulator;
+
+       /* this tests the true physical state of the regulator... */
+       if (regulator_is_enabled(regulator)) {
+               /*
+                * but these only operate on the logical state of the
+                * regulator... so we need to logicaly "adopt" it on
+                * to turn it off
+                */
+               regulator_enable(regulator);
+               regulator_disable(regulator);
+       }
+
+       /* we pull reset to low to make sure that the chip doesn't
+        * drain power through the reset line */
+       s3c2410_gpio_setpin(GTA02_GPIO_BT_EN, 0);
+
+       rfkill = rfkill_alloc(pdev->name, &pdev->dev, RFKILL_TYPE_BLUETOOTH,
+                            &gta02_bt_rfkill_ops, &pdev->dev);
+
+       if (!rfkill) {
+               dev_err(&pdev->dev, "Failed to allocate rfkill\n");
+               return -ENOMEM;
+       }
+
+    rfkill_init_sw_state(rfkill, 0);
+
+       ret = rfkill_register(rfkill);
+       if (ret) {
+               rfkill_destroy(rfkill);
+               dev_err(&pdev->dev, "Failed to register rfkill\n");
+               return ret;
+       }
+
+       bt_data->rfkill = rfkill;
+
+       return sysfs_create_group(&pdev->dev.kobj, &gta02_bt_attr_group);
+}
+
+static int gta02_bt_remove(struct platform_device *pdev)
+{
+       struct gta02_pm_bt_data *bt_data = dev_get_drvdata(&pdev->dev);
+       struct regulator *regulator;
+
+       sysfs_remove_group(&pdev->dev.kobj, &gta02_bt_attr_group);
+
+       if (bt_data->rfkill) {
+               rfkill_destroy(bt_data->rfkill);
+       }
+
+       if (!bt_data || !bt_data->regulator)
+               return 0;
+
+       regulator = bt_data->regulator;
+
+       /* Make sure regulator is disabled before calling regulator_put */
+       if (regulator_is_enabled(regulator))
+               regulator_disable(regulator);
+
+       regulator_put(regulator);
+
+       kfree(bt_data);
+
+       return 0;
+}
+
+static struct platform_driver gta02_bt_driver = {
+       .probe          = gta02_bt_probe,
+       .remove         = gta02_bt_remove,
+       .suspend        = gta02_bt_suspend,
+       .resume         = gta02_bt_resume,
+       .driver         = {
+               .name           = "gta02-pm-bt",
+       },
+};
+
+static int __devinit gta02_bt_init(void)
+{
+       return platform_driver_register(&gta02_bt_driver);
+}
+module_init(gta02_bt_init);
+
+static void gta02_bt_exit(void)
+{
+       platform_driver_unregister(&gta02_bt_driver);
+}
+module_exit(gta02_bt_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Harald Welte <laforge@openmoko.org>");
+MODULE_DESCRIPTION(DRVMSG);
index f28fa8f..8eae7d8 100644 (file)
@@ -156,6 +156,10 @@ static struct s3c2410_uartcfg gta02_uartcfgs[] = {
        },
 };
 
+static struct platform_device gta02_pm_bt_dev = {
+       .name = "gta02-pm-bt",
+};
+
 #ifdef CONFIG_CHARGER_PCF50633
 /*
  * On GTA02 the 1A charger features a 48K resistor to 0V on the ID pin.
@@ -261,6 +265,13 @@ static char *gta02_batteries[] = {
        "battery",
 };
 
+static struct regulator_consumer_supply ldo4_consumers[] = {
+       {
+               .dev = &gta02_pm_bt_dev.dev,
+               .supply = "BT_3V2",
+       },
+};
+
 struct pcf50633_platform_data gta02_pcf_pdata = {
        .resumers = {
                [0] =   PCF50633_INT1_USBINS |
@@ -359,6 +370,8 @@ struct pcf50633_platform_data gta02_pcf_pdata = {
                                .valid_ops_mask = REGULATOR_CHANGE_STATUS,
                                .apply_uV = 1,
                        },
+                       .num_consumer_supplies = ARRAY_SIZE(ldo4_consumers),
+                       .consumer_supplies = ldo4_consumers,
                },
                [PCF50633_REGULATOR_LDO5] = {
                        .constraints = {
@@ -716,6 +729,7 @@ static struct platform_device *gta02_devices[] __initdata = {
        &gta02_buttons_device,
        &gta02_leds_device,
        &gta02_pwm_leds_device,
+       &gta02_pm_bt_dev,
 };
 
 /* These guys DO need to be children of PMU. */