introduce-resume-exception-capture.patch
authorAndy Green <andy@openmoko.com>
Wed, 19 Nov 2008 17:09:52 +0000 (17:09 +0000)
committerAndy Green <agreen@pads.home.warmcat.com>
Wed, 19 Nov 2008 17:09:52 +0000 (17:09 +0000)
This patch introduces a new resume debugging concept: if we
get an OOPS inbetween starting suspend and finishing resume, it
uses a new "emergency spew" device similar to BUT NOT REQUIRING
CONFIG_DEBUG_LL to dump the syslog buffer and then the OOPS
on the debug device defined by the existing CONFIG_DEBUG_S3C_UART
index.  But neither CONFIG_DEBUG_LL nor the S3C low level configs
are needed to use this feature.

Another difference between this feature and CONFIG_DEBUG_LL is that
it does not affect resume timing, ordering or UART traffic UNLESS
there is an OOPS during resume.

The patch adds three global exports, one to say if we are inside
suspend / resume, and two callbacks for printk() to use to init
and dump the emergency data.  The callbacks are set in s3c serial
device init, but the whole structure is arch independent.

Signed-off-by: Andy Green <andy@openmoko.com>
drivers/serial/s3c2410.c
include/linux/kernel.h
include/linux/suspend.h
kernel/power/main.c
kernel/printk.c

index 36b5fcc..bcf0fdb 100644 (file)
@@ -26,6 +26,7 @@
 
 #include <plat/regs-serial.h>
 #include <mach/regs-gpio.h>
+#include <mach/regs-clock.h>
 
 /* structures */
 
@@ -936,6 +937,69 @@ static struct s3c24xx_uart_port s3c24xx_serial_ports[NR_PORTS] = {
 #endif
 };
 
+static void s3c24xx_serial_force_debug_port_up(void)
+{
+       struct s3c24xx_uart_port *ourport = &s3c24xx_serial_ports[
+                                                        CONFIG_DEBUG_S3C_UART];
+       struct s3c24xx_uart_clksrc *clksrc = NULL;
+       struct clk *clk = NULL;
+       unsigned long tmp;
+
+       s3c24xx_serial_getclk(&ourport->port, &clksrc, &clk, 115200);
+
+       tmp = __raw_readl(S3C2410_CLKCON);
+
+       /* re-start uart clocks */
+       tmp |= S3C2410_CLKCON_UART0;
+       tmp |= S3C2410_CLKCON_UART1;
+       tmp |= S3C2410_CLKCON_UART2;
+
+       __raw_writel(tmp, S3C2410_CLKCON);
+       udelay(10);
+
+       s3c24xx_serial_setsource(&ourport->port, clksrc);
+
+       if (ourport->baudclk != NULL && !IS_ERR(ourport->baudclk)) {
+               clk_disable(ourport->baudclk);
+               ourport->baudclk  = NULL;
+       }
+
+       clk_enable(clk);
+
+       ourport->clksrc = clksrc;
+       ourport->baudclk = clk;
+}
+
+static void s3c2410_printascii(const char *sz)
+{
+       struct s3c24xx_uart_port *ourport = &s3c24xx_serial_ports[
+                                                        CONFIG_DEBUG_S3C_UART];
+       struct uart_port *port = &ourport->port;
+
+       /* 8 N 1 */
+       wr_regl(port, S3C2410_ULCON, (rd_regl(port, S3C2410_ULCON)) | 3);
+       /* polling mode */
+       wr_regl(port, S3C2410_UCON, (rd_regl(port, S3C2410_UCON) & ~0xc0f) | 5);
+       /* disable FIFO */
+       wr_regl(port, S3C2410_UFCON, (rd_regl(port, S3C2410_UFCON) & ~0x01));
+       /* fix baud rate */
+       wr_regl(port, S3C2410_UBRDIV, 26);
+
+       while (*sz) {
+               int timeout = 10000000;
+
+               /* spin on it being busy */
+               while ((!(rd_regl(port, S3C2410_UTRSTAT) & 2)) && timeout--)
+                       ;
+
+               /* transmit register */
+               wr_regl(port, S3C2410_UTXH, *sz);
+
+               sz++;
+       }
+}
+
+
 /* s3c24xx_serial_resetport
  *
  * wrapper to call the specific reset for this port (reset the fifos
@@ -1113,6 +1177,11 @@ static int s3c24xx_serial_resume(struct platform_device *dev)
 static int s3c24xx_serial_init(struct platform_driver *drv,
                               struct s3c24xx_uart_info *info)
 {
+       /* set up the emergency debug UART functions */
+
+       printk_emergency_debug_spew_init = s3c24xx_serial_force_debug_port_up;
+       printk_emergency_debug_spew_send_string = s3c2410_printascii;
+
        dbg("s3c24xx_serial_init(%p,%p)\n", drv, info);
        return platform_driver_register(drv);
 }
index fba141d..2e8c7fc 100644 (file)
@@ -225,6 +225,8 @@ extern struct ratelimit_state printk_ratelimit_state;
 extern int printk_ratelimit(void);
 extern bool printk_timed_ratelimit(unsigned long *caller_jiffies,
                                   unsigned int interval_msec);
+extern void (*printk_emergency_debug_spew_init)(void);
+extern void (*printk_emergency_debug_spew_send_string)(const char *);
 #else
 static inline int vprintk(const char *s, va_list args)
        __attribute__ ((format (printf, 1, 0)));
index 2ce8207..4876991 100644 (file)
@@ -146,6 +146,12 @@ struct pbe {
        struct pbe *next;
 };
 
+/**
+ * global indication we are somewhere between start of suspend and end of
+ * resume, nonzero is true
+ */
+extern int global_inside_suspend;
+
 /* mm/page_alloc.c */
 extern void mark_free_pages(struct zone *zone);
 
index 19122cf..3fdc1f4 100644 (file)
@@ -132,6 +132,9 @@ static inline int suspend_test(int level) { return 0; }
 
 #endif /* CONFIG_PM_SLEEP */
 
+int global_inside_suspend;
+EXPORT_SYMBOL(global_inside_suspend);
+
 #ifdef CONFIG_SUSPEND
 
 #ifdef CONFIG_PM_TEST_SUSPEND
@@ -322,6 +325,8 @@ int suspend_devices_and_enter(suspend_state_t state)
        if (!suspend_ops)
                return -ENOSYS;
 
+       global_inside_suspend = 1;
+
        if (suspend_ops->begin) {
                error = suspend_ops->begin(state);
                if (error)
@@ -365,6 +370,8 @@ int suspend_devices_and_enter(suspend_state_t state)
  Close:
        if (suspend_ops->end)
                suspend_ops->end();
+       global_inside_suspend = 0;
+
        return error;
 
  Recover_platform:
index f492f15..c81ad86 100644 (file)
 #include <linux/security.h>
 #include <linux/bootmem.h>
 #include <linux/syscalls.h>
+#include <linux/jiffies.h>
+#include <linux/suspend.h>
 
 #include <asm/uaccess.h>
+#include <asm/plat-s3c24xx/neo1973.h>
+#include <asm/arch/gta02.h>
 
 /*
  * Architectures can override it:
@@ -67,6 +71,12 @@ int console_printk[4] = {
 int oops_in_progress;
 EXPORT_SYMBOL(oops_in_progress);
 
+void (*printk_emergency_debug_spew_init)(void) = NULL;
+EXPORT_SYMBOL(printk_emergency_debug_spew_init);
+
+void (*printk_emergency_debug_spew_send_string)(const char *) = NULL;
+EXPORT_SYMBOL(printk_emergency_debug_spew_send_string);
+
 /*
  * console_sem protects the console_drivers list, and also
  * provides serialisation for access to the entire console
@@ -668,6 +678,37 @@ asmlinkage int vprintk(const char *fmt, va_list args)
        printed_len += vscnprintf(printk_buf + printed_len,
                                  sizeof(printk_buf) - printed_len, fmt, args);
 
+       /* if you're debugging resume, the normal methods can change resume
+        * ordering behaviours because their debugging output is synchronous
+        * (ie, CONFIG_DEBUG_LL).  If your problem is an OOPS, this code
+        * will not affect the speed and duration and ordering of resume
+        * actions, but will give you a chance to read the full undumped
+        * syslog AND the OOPS data when it happens
+        *
+        * if you support it, your debug device init can override the exported
+        * emergency_debug_spew_init and emergency_debug_spew_send_string to
+        * usually force polling or bitbanging on your debug console device
+        */
+       if (oops_in_progress && global_inside_suspend &&
+           printk_emergency_debug_spew_init &&
+           printk_emergency_debug_spew_send_string) {
+               unsigned long cur_index;
+               char ch[2];
+
+               if (global_inside_suspend == 1) {
+                       (printk_emergency_debug_spew_init)();
+
+                       ch[1] = '\0';
+                       cur_index = con_start;
+                       while (cur_index != log_end) {
+                               ch[0] = LOG_BUF(cur_index);
+                               (printk_emergency_debug_spew_send_string)(ch);
+                               cur_index++;
+                       }
+                       global_inside_suspend++; /* only once */
+               }
+               (printk_emergency_debug_spew_send_string)(printk_buf);
+       }
 
        /*
         * Copy the output into log_buf.  If the caller didn't provide