Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide-next-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide-next-2.6:
  sl82c105: remove no longer needed debugging code
  sis5513: remove stale TODO
  pdc202xx_old: remove no longer needed debugging code
  cy82c693: remove no longer needed debugging code
  cmd64x: remove no longer needed debugging code
  alim15x3: remove obsolete and dangerous wdc_udma parameter
  ide: Increase WAIT_DRQ to accomodate some CF cards and SSD drives.
  cs5535: add pci id for AMD based CS5535 controllers
  slc90e66: fix UDMA handling
  drivers/ide/tx4938ide.c: use resource_size()
  drivers/ide/ide_platform.c: use resource_size()
  drivers/ide/au1xxx-ide.c: use resource_size()
  hpt366: remove dead old timing tables
  ide: update Kconfig text to mark as deprecated
  ide-tape: remove the BKL
  hpt366: kill unused #define's

15 files changed, 39 insertions, 221 deletions

diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig
index 9a5d0aaac9d..98ccfeb3f5a 100644
--- a/drivers/ide/Kconfig
+++ b/drivers/ide/Kconfig
@@ -7,50 +7,25 @@ config HAVE_IDE
 	bool
 
 menuconfig IDE
-	tristate "ATA/ATAPI/MFM/RLL support"
+	tristate "ATA/ATAPI/MFM/RLL support (DEPRECATED)"
 	depends on HAVE_IDE
 	depends on BLOCK
 	---help---
-	  If you say Y here, your kernel will be able to manage low cost mass
-	  storage units such as ATA/(E)IDE and ATAPI units. The most common
-	  cases are IDE hard drives and ATAPI CD-ROM drives.
-
-	  If your system is pure SCSI and doesn't use these interfaces, you
-	  can say N here.
-
-	  Integrated Disk Electronics (IDE aka ATA-1) is a connecting standard
-	  for mass storage units such as hard disks. It was designed by
-	  Western Digital and Compaq Computer in 1984. It was then named
-	  ST506. Quite a number of disks use the IDE interface.
-
-	  AT Attachment (ATA) is the superset of the IDE specifications.
-	  ST506 was also called ATA-1.
-
-	  Fast-IDE is ATA-2 (also named Fast ATA), Enhanced IDE (EIDE) is
-	  ATA-3. It provides support for larger disks (up to 8.4GB by means of
-	  the LBA standard), more disks (4 instead of 2) and for other mass
-	  storage units such as tapes and cdrom. UDMA/33 (aka UltraDMA/33) is
-	  ATA-4 and provides faster (and more CPU friendly) transfer modes
-	  than previous PIO (Programmed processor Input/Output) from previous
-	  ATA/IDE standards by means of fast DMA controllers.
-
-	  ATA Packet Interface (ATAPI) is a protocol used by EIDE tape and
-	  CD-ROM drives, similar in many respects to the SCSI protocol.
-
-	  SMART IDE (Self Monitoring, Analysis and Reporting Technology) was
-	  designed in order to prevent data corruption and disk crash by
-	  detecting pre hardware failure conditions (heat, access time, and
-	  the like...). Disks built since June 1995 may follow this standard.
-	  The kernel itself doesn't manage this; however there are quite a
-	  number of user programs such as smart that can query the status of
-	  SMART parameters from disk drives.
+	  If you say Y here, your kernel will be able to manage ATA/(E)IDE and
+	  ATAPI units. The most common cases are IDE hard drives and ATAPI
+	  CD-ROM drives.
+
+	  This subsystem is currently in maintenance mode with only bug fix
+	  changes applied. Users of ATA hardware are encouraged to migrate to
+	  the newer ATA subsystem ("Serial ATA (prod) and Parallel ATA
+	  (experimental) drivers") which is more actively maintained.
 
 	  To compile this driver as a module, choose M here: the
 	  module will be called ide-core.
 
 	  For further information, please read <file:Documentation/ide/ide.txt>.
 
-	  If unsure, say Y.
+	  If unsure, say N.
 
 if IDE
 
diff --git a/drivers/ide/alim15x3.c b/drivers/ide/alim15x3.c
index e59b6dee9ae..0abc43f3101 100644
--- a/drivers/ide/alim15x3.c
+++ b/drivers/ide/alim15x3.c
@@ -40,16 +40,6 @@
 #define DRV_NAME "alim15x3"
 
 /*
- * Allow UDMA on M1543C-E chipset for WDC disks that ignore CRC checking
- * (this is DANGEROUS and could result in data corruption).
- */
-static int wdc_udma;
-
-module_param(wdc_udma, bool, 0);
-MODULE_PARM_DESC(wdc_udma,
-		 "allow UDMA on M1543C-E chipset for WDC disks (DANGEROUS)");
-
-/*
  *	ALi devices are not plug in. Otherwise these static values would
  *	need to go. They ought to go away anyway
  */
@@ -132,7 +122,7 @@ static u8 ali_udma_filter(ide_drive_t *drive)
 	if (m5229_revision > 0x20 && m5229_revision < 0xC2) {
 		if (drive->media != ide_disk)
 			return 0;
-		if (wdc_udma == 0 && chip_is_1543c_e &&
+		if (chip_is_1543c_e &&
 		    strstr((char *)&drive->id[ATA_ID_PROD], "WDC "))
 			return 0;
 	}
diff --git a/drivers/ide/au1xxx-ide.c b/drivers/ide/au1xxx-ide.c
index 58121bd6c11..87cef0c440a 100644
--- a/drivers/ide/au1xxx-ide.c
+++ b/drivers/ide/au1xxx-ide.c
@@ -532,14 +532,13 @@ static int au_ide_probe(struct platform_device *dev)
 		goto out;
 	}
 
-	if (!request_mem_region(res->start, res->end - res->start + 1,
-				dev->name)) {
+	if (!request_mem_region(res->start, resource_size(res), dev->name)) {
 		pr_debug("%s: request_mem_region failed\n", DRV_NAME);
 		ret =  -EBUSY;
 		goto out;
 	}
 
-	ahwif->regbase = (u32)ioremap(res->start, res->end - res->start + 1);
+	ahwif->regbase = (u32)ioremap(res->start, resource_size(res));
 	if (ahwif->regbase == 0) {
 		ret = -ENOMEM;
 		goto out;
@@ -575,7 +574,7 @@ static int au_ide_remove(struct platform_device *dev)
 	iounmap((void *)ahwif->regbase);
 
 	res = platform_get_resource(dev, IORESOURCE_MEM, 0);
-	release_mem_region(res->start, res->end - res->start + 1);
+	release_mem_region(res->start, resource_size(res));
 
 	return 0;
 }
diff --git a/drivers/ide/cmd64x.c b/drivers/ide/cmd64x.c
index ca0c46f6580..f2500c8826b 100644
--- a/drivers/ide/cmd64x.c
+++ b/drivers/ide/cmd64x.c
@@ -20,14 +20,6 @@
 
 #define DRV_NAME "cmd64x"
 
-#define CMD_DEBUG 0
-
-#if CMD_DEBUG
-#define cmdprintk(x...)	printk(x)
-#else
-#define cmdprintk(x...)
-#endif
-
 /*
  * CMD64x specific registers definition.
  */
@@ -76,9 +68,6 @@ static void program_cycle_times (ide_drive_t *drive, int cycle_time, int active_
 		{15, 15, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 0};
 	static const u8 drwtim_regs[4] = {DRWTIM0, DRWTIM1, DRWTIM2, DRWTIM3};
 
-	cmdprintk("program_cycle_times parameters: total=%d, active=%d\n",
-		  cycle_time, active_time);
-
 	cycle_count	= quantize_timing( cycle_time, clock_time);
 	active_count	= quantize_timing(active_time, clock_time);
 	recovery_count	= cycle_count - active_count;
@@ -94,9 +83,6 @@ static void program_cycle_times (ide_drive_t *drive, int cycle_time, int active_
 	if (active_count > 16)		/* shouldn't actually happen... */
 	 	active_count = 16;
 
-	cmdprintk("Final counts: total=%d, active=%d, recovery=%d\n",
-		  cycle_count, active_count, recovery_count);
-
 	/*
 	 * Convert values to internal chipset representation
 	 */
@@ -106,7 +92,6 @@ static void program_cycle_times (ide_drive_t *drive, int cycle_time, int active_
 	/* Program the active/recovery counts into the DRWTIM register */
 	drwtim = (active_count << 4) | recovery_count;
 	(void) pci_write_config_byte(dev, drwtim_regs[drive->dn], drwtim);
-	cmdprintk("Write 0x%02x to reg 0x%x\n", drwtim, drwtim_regs[drive->dn]);
 }
 
 /*
@@ -150,7 +135,6 @@ static void cmd64x_tune_pio(ide_drive_t *drive, const u8 pio)
 
 	if (setup_count > 5)		/* shouldn't actually happen... */
 		setup_count = 5;
-	cmdprintk("Final address setup count: %d\n", setup_count);
 
 	/*
 	 * Program the address setup clocks into the ARTTIM registers.
@@ -162,7 +146,6 @@ static void cmd64x_tune_pio(ide_drive_t *drive, const u8 pio)
 	arttim &= ~0xc0;
 	arttim |= setup_values[setup_count];
 	(void) pci_write_config_byte(dev, arttim_regs[drive->dn], arttim);
-	cmdprintk("Write 0x%02x to reg 0x%x\n", arttim, arttim_regs[drive->dn]);
 }
 
 /*
diff --git a/drivers/ide/cs5535.c b/drivers/ide/cs5535.c
index 983d957a018..b883838adc2 100644
--- a/drivers/ide/cs5535.c
+++ b/drivers/ide/cs5535.c
@@ -187,6 +187,7 @@ static int __devinit cs5535_init_one(struct pci_dev *dev,
 
 static const struct pci_device_id cs5535_pci_tbl[] = {
 	{ PCI_VDEVICE(NS, PCI_DEVICE_ID_NS_CS5535_IDE), 0 },
+	{ PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_CS5535_IDE), },
 	{ 0, },
 };
 
diff --git a/drivers/ide/cy82c693.c b/drivers/ide/cy82c693.c
index 74fc5401f40..d6e2cbbc53a 100644
--- a/drivers/ide/cy82c693.c
+++ b/drivers/ide/cy82c693.c
@@ -51,11 +51,6 @@
 #define DRV_NAME "cy82c693"
 
 /*
- *	The following are used to debug the driver.
- */
-#define CY82C693_DEBUG_INFO	0
-
-/*
  *	NOTE: the value for busmaster timeout is tricky and I got it by
  *	trial and error!  By using a to low value will cause DMA timeouts
  *	and drop IDE performance, and by using a to high value will cause
@@ -176,11 +171,6 @@ static void cy82c693_set_dma_mode(ide_drive_t *drive, const u8 mode)
 	outb(index, CY82_INDEX_PORT);
 	outb(data, CY82_DATA_PORT);
 
-#if CY82C693_DEBUG_INFO
-	printk(KERN_INFO "%s (ch=%d, dev=%d): set DMA mode to %d (single=%d)\n",
-		drive->name, hwif->channel, drive->dn & 1, mode & 3, single);
-#endif /* CY82C693_DEBUG_INFO */
-
 	/*
 	 * note: below we set the value for Bus Master IDE TimeOut Register
 	 * I'm not absolutly sure what this does, but it solved my problem
@@ -194,11 +184,6 @@ static void cy82c693_set_dma_mode(ide_drive_t *drive, const u8 mode)
 	data = BUSMASTER_TIMEOUT;
 	outb(CY82_INDEX_TIMEOUT, CY82_INDEX_PORT);
 	outb(data, CY82_DATA_PORT);
-
-#if CY82C693_DEBUG_INFO
-	printk(KERN_INFO "%s: Set IDE Bus Master TimeOut Register to 0x%X\n",
-		drive->name, data);
-#endif /* CY82C693_DEBUG_INFO */
 }
 
 static void cy82c693_set_pio_mode(ide_drive_t *drive, const u8 pio)
@@ -239,8 +224,6 @@ static void cy82c693_set_pio_mode(ide_drive_t *drive, const u8 pio)
 		pci_write_config_byte(dev, CY82_IDE_MASTER_IOR, pclk.time_16r);
 		pci_write_config_byte(dev, CY82_IDE_MASTER_IOW, pclk.time_16w);
 		pci_write_config_byte(dev, CY82_IDE_MASTER_8BIT, pclk.time_8);
-
-		addrCtrl &= 0xF;
 	} else {
 		/*
 		 * set slave drive
@@ -257,17 +240,7 @@ static void cy82c693_set_pio_mode(ide_drive_t *drive, const u8 pio)
 		pci_write_config_byte(dev, CY82_IDE_SLAVE_IOR, pclk.time_16r);
 		pci_write_config_byte(dev, CY82_IDE_SLAVE_IOW, pclk.time_16w);
 		pci_write_config_byte(dev, CY82_IDE_SLAVE_8BIT, pclk.time_8);
-
-		addrCtrl >>= 4;
-		addrCtrl &= 0xF;
 	}
-
-#if CY82C693_DEBUG_INFO
-	printk(KERN_INFO "%s (ch=%d, dev=%d): set PIO timing to "
-		"(addr=0x%X, ior=0x%X, iow=0x%X, 8bit=0x%X)\n",
-		drive->name, hwif->channel, drive->dn & 1,
-		addrCtrl, pclk.time_16r, pclk.time_16w, pclk.time_8);
-#endif /* CY82C693_DEBUG_INFO */
 }
 
 static void __devinit init_iops_cy82c693(ide_hwif_t *hwif)
diff --git a/drivers/ide/hpt366.c b/drivers/ide/hpt366.c
index 7ce68ef6b90..4d90ac2dbb1 100644
--- a/drivers/ide/hpt366.c
+++ b/drivers/ide/hpt366.c
@@ -297,68 +297,6 @@ static u32 twenty_five_base_hpt36x[] = {
 	/* XFER_PIO_0 */	0xc0d08585
 };
 
-#if 0
-/* These are the timing tables from the HighPoint open source drivers... */
-static u32 thirty_three_base_hpt37x[] = {
-	/* XFER_UDMA_6 */	0x12446231,	/* 0x12646231 ?? */
-	/* XFER_UDMA_5 */	0x12446231,
-	/* XFER_UDMA_4 */	0x12446231,
-	/* XFER_UDMA_3 */	0x126c6231,
-	/* XFER_UDMA_2 */	0x12486231,
-	/* XFER_UDMA_1 */	0x124c6233,
-	/* XFER_UDMA_0 */	0x12506297,
-
-	/* XFER_MW_DMA_2 */	0x22406c31,
-	/* XFER_MW_DMA_1 */	0x22406c33,
-	/* XFER_MW_DMA_0 */	0x22406c97,
-
-	/* XFER_PIO_4 */	0x06414e31,
-	/* XFER_PIO_3 */	0x06414e42,
-	/* XFER_PIO_2 */	0x06414e53,
-	/* XFER_PIO_1 */	0x06814e93,
-	/* XFER_PIO_0 */	0x06814ea7
-};
-
-static u32 fifty_base_hpt37x[] = {
-	/* XFER_UDMA_6 */	0x12848242,
-	/* XFER_UDMA_5 */	0x12848242,
-	/* XFER_UDMA_4 */	0x12ac8242,
-	/* XFER_UDMA_3 */	0x128c8242,
-	/* XFER_UDMA_2 */	0x120c8242,
-	/* XFER_UDMA_1 */	0x12148254,
-	/* XFER_UDMA_0 */	0x121882ea,
-
-	/* XFER_MW_DMA_2 */	0x22808242,
-	/* XFER_MW_DMA_1 */	0x22808254,
-	/* XFER_MW_DMA_0 */	0x228082ea,
-
-	/* XFER_PIO_4 */	0x0a81f442,
-	/* XFER_PIO_3 */	0x0a81f443,
-	/* XFER_PIO_2 */	0x0a81f454,
-	/* XFER_PIO_1 */	0x0ac1f465,
-	/* XFER_PIO_0 */	0x0ac1f48a
-};
-
-static u32 sixty_six_base_hpt37x[] = {
-	/* XFER_UDMA_6 */	0x1c869c62,
-	/* XFER_UDMA_5 */	0x1cae9c62,	/* 0x1c8a9c62 */
-	/* XFER_UDMA_4 */	0x1c8a9c62,
-	/* XFER_UDMA_3 */	0x1c8e9c62,
-	/* XFER_UDMA_2 */	0x1c929c62,
-	/* XFER_UDMA_1 */	0x1c9a9c62,
-	/* XFER_UDMA_0 */	0x1c829c62,
-
-	/* XFER_MW_DMA_2 */	0x2c829c62,
-	/* XFER_MW_DMA_1 */	0x2c829c66,
-	/* XFER_MW_DMA_0 */	0x2c829d2e,
-
-	/* XFER_PIO_4 */	0x0c829c62,
-	/* XFER_PIO_3 */	0x0c829c84,
-	/* XFER_PIO_2 */	0x0c829ca6,
-	/* XFER_PIO_1 */	0x0d029d26,
-	/* XFER_PIO_0 */	0x0d029d5e
-};
-#else
 /*
  * The following are the new timing tables with PIO mode data/taskfile transfer
  * overclocking fixed...
@@ -424,16 +362,13 @@ static u32 sixty_six_base_hpt37x[] = {
 	/* XFER_PIO_1 */	0x0d02ff26,
 	/* XFER_PIO_0 */	0x0d42ff7f
 };
-#endif
 
-#define HPT366_DEBUG_DRIVE_INFO		0
 #define HPT371_ALLOW_ATA133_6		1
 #define HPT302_ALLOW_ATA133_6		1
 #define HPT372_ALLOW_ATA133_6		1
 #define HPT370_ALLOW_ATA100_5		0
 #define HPT366_ALLOW_ATA66_4		1
 #define HPT366_ALLOW_ATA66_3		1
-#define HPT366_MAX_DEVS			8
 
 /* Supported ATA clock frequencies */
 enum ata_clock {
diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c
index 58fc920d5c3..6a0e6254216 100644
--- a/drivers/ide/ide-tape.c
+++ b/drivers/ide/ide-tape.c
@@ -221,6 +221,8 @@ typedef struct ide_tape_obj {
 
 static DEFINE_MUTEX(idetape_ref_mutex);
 
+static DEFINE_MUTEX(idetape_chrdev_mutex);
+
 static struct class *idetape_sysfs_class;
 
 static void ide_tape_release(struct device *);
@@ -1457,10 +1459,11 @@ static int idetape_chrdev_open(struct inode *inode, struct file *filp)
 	if (i >= MAX_HWIFS * MAX_DRIVES)
 		return -ENXIO;
 
-	lock_kernel();
+	mutex_lock(&idetape_chrdev_mutex);
+
 	tape = ide_tape_get(NULL, true, i);
 	if (!tape) {
-		unlock_kernel();
+		mutex_unlock(&idetape_chrdev_mutex);
 		return -ENXIO;
 	}
 
@@ -1519,12 +1522,15 @@ static int idetape_chrdev_open(struct inode *inode, struct file *filp)
 				tape->door_locked = DOOR_LOCKED;
 		}
 	}
-	unlock_kernel();
+	mutex_unlock(&idetape_chrdev_mutex);
+
 	return 0;
 
 out_put_tape:
 	ide_tape_put(tape);
-	unlock_kernel();
+
+	mutex_unlock(&idetape_chrdev_mutex);
+
 	return retval;
 }
 
@@ -1551,7 +1557,8 @@ static int idetape_chrdev_release(struct inode *inode, struct file *filp)
 	ide_drive_t *drive = tape->drive;
 	unsigned int minor = iminor(inode);
 
-	lock_kernel();
+	mutex_lock(&idetape_chrdev_mutex);
+
 	tape = drive->driver_data;
 
 	ide_debug_log(IDE_DBG_FUNC, "enter");
@@ -1575,7 +1582,9 @@ static int idetape_chrdev_release(struct inode *inode, struct file *filp)
 	}
 	clear_bit(ilog2(IDE_AFLAG_BUSY), &drive->atapi_flags);
 	ide_tape_put(tape);
-	unlock_kernel();
+
+	mutex_unlock(&idetape_chrdev_mutex);
+
 	return 0;
 }
 
diff --git a/drivers/ide/ide_platform.c b/drivers/ide/ide_platform.c
index b579fbe8837..42965b3e30b 100644
--- a/drivers/ide/ide_platform.c
+++ b/drivers/ide/ide_platform.c
@@ -81,14 +81,14 @@ static int __devinit plat_ide_probe(struct platform_device *pdev)
 
 	if (mmio) {
 		base = devm_ioremap(&pdev->dev,
-			res_base->start, res_base->end - res_base->start + 1);
+			res_base->start, resource_size(res_base));
 		alt_base = devm_ioremap(&pdev->dev,
-			res_alt->start, res_alt->end - res_alt->start + 1);
+			res_alt->start, resource_size(res_alt));
 	} else {
 		base = devm_ioport_map(&pdev->dev,
-			res_base->start, res_base->end - res_base->start + 1);
+			res_base->start, resource_size(res_base));
 		alt_base = devm_ioport_map(&pdev->dev,
-			res_alt->start, res_alt->end - res_alt->start + 1);
+			res_alt->start, resource_size(res_alt));
 	}
 
 	memset(&hw, 0, sizeof(hw));
diff --git a/drivers/ide/pdc202xx_old.c b/drivers/ide/pdc202xx_old.c
index cb812f3700e..35161dd840a 100644
--- a/drivers/ide/pdc202xx_old.c
+++ b/drivers/ide/pdc202xx_old.c
@@ -21,8 +21,6 @@
 
 #define DRV_NAME "pdc202xx_old"
 
-#define PDC202XX_DEBUG_DRIVE_INFO	0
-
 static void pdc_old_disable_66MHz_clock(ide_hwif_t *);
 
 static void pdc202xx_set_mode(ide_drive_t *drive, const u8 speed)
@@ -34,11 +32,6 @@ static void pdc202xx_set_mode(ide_drive_t *drive, const u8 speed)
 	u8			AP = 0, BP = 0, CP = 0;
 	u8			TA = 0, TB = 0, TC = 0;
 
-#if PDC202XX_DEBUG_DRIVE_INFO
-	u32			drive_conf = 0;
-	pci_read_config_dword(dev, drive_pci, &drive_conf);
-#endif
-
 	/*
 	 * TODO: do this once per channel
 	 */
@@ -89,14 +82,6 @@ static void pdc202xx_set_mode(ide_drive_t *drive, const u8 speed)
 		pci_write_config_byte(dev, drive_pci + 1, BP | TB);
 		pci_write_config_byte(dev, drive_pci + 2, CP | TC);
 	}
-
-#if PDC202XX_DEBUG_DRIVE_INFO
-	printk(KERN_DEBUG "%s: %s drive%d 0x%08x ",
-		drive->name, ide_xfer_verbose(speed),
-		drive->dn, drive_conf);
-	pci_read_config_dword(dev, drive_pci, &drive_conf);
-	printk("0x%08x\n", drive_conf);
-#endif
 }
 
 static void pdc202xx_set_pio_mode(ide_drive_t *drive, const u8 pio)
diff --git a/drivers/ide/sis5513.c b/drivers/ide/sis5513.c
index 3b88eba04c9..468706082fb 100644
--- a/drivers/ide/sis5513.c
+++ b/drivers/ide/sis5513.c
@@ -632,12 +632,3 @@ module_exit(sis5513_ide_exit);
 MODULE_AUTHOR("Lionel Bouton, L C Chang, Andre Hedrick, Vojtech Pavlik");
 MODULE_DESCRIPTION("PCI driver module for SIS IDE");
 MODULE_LICENSE("GPL");
-
-/*
- * TODO:
- *	- CLEANUP
- *	- More checks in the config registers (force values instead of
- *	  relying on the BIOS setting them correctly).
- *	- Further optimisations ?
- *	  . for example ATA66+ regs 0x48 & 0x4A
- */
diff --git a/drivers/ide/sl82c105.c b/drivers/ide/sl82c105.c
index d698da470d6..3c2bbf0057e 100644
--- a/drivers/ide/sl82c105.c
+++ b/drivers/ide/sl82c105.c
@@ -24,13 +24,6 @@
 
 #define DRV_NAME "sl82c105"
 
-#undef DEBUG
-
-#ifdef DEBUG
-#define DBG(arg) printk arg
-#else
-#define DBG(fmt,...)
-#endif
 /*
  * SL82C105 PCI config register 0x40 bits.
  */
@@ -104,9 +97,6 @@ static void sl82c105_set_dma_mode(ide_drive_t *drive, const u8 speed)
 	unsigned long timings = (unsigned long)ide_get_drivedata(drive);
 	u16 drv_ctrl;
 
- 	DBG(("sl82c105_tune_chipset(drive:%s, speed:%s)\n",
-	     drive->name, ide_xfer_verbose(speed)));
-
 	drv_ctrl = mwdma_timings[speed - XFER_MW_DMA_0];
 
 	/*
@@ -196,8 +186,6 @@ static void sl82c105_dma_start(ide_drive_t *drive)
 	struct pci_dev *dev	= to_pci_dev(hwif->dev);
 	int reg 		= 0x44 + drive->dn * 4;
 
-	DBG(("%s(drive:%s)\n", __func__, drive->name));
-
 	pci_write_config_word(dev, reg,
 			      (unsigned long)ide_get_drivedata(drive) >> 16);
 
@@ -209,8 +197,6 @@ static void sl82c105_dma_clear(ide_drive_t *drive)
 {
 	struct pci_dev *dev = to_pci_dev(drive->hwif->dev);
 
-	DBG(("sl82c105_dma_clear(drive:%s)\n", drive->name));
-
 	sl82c105_reset_host(dev);
 }
 
@@ -218,11 +204,7 @@ static int sl82c105_dma_end(ide_drive_t *drive)
 {
 	struct pci_dev *dev	= to_pci_dev(drive->hwif->dev);
 	int reg 		= 0x44 + drive->dn * 4;
-	int ret;
-
-	DBG(("%s(drive:%s)\n", __func__, drive->name));
-
-	ret = ide_dma_end(drive);
+	int ret			= ide_dma_end(drive);
 
 	pci_write_config_word(dev, reg,
 			      (unsigned long)ide_get_drivedata(drive));
@@ -239,8 +221,6 @@ static void sl82c105_resetproc(ide_drive_t *drive)
 	struct pci_dev *dev = to_pci_dev(drive->hwif->dev);
 	u32 val;
 
-	DBG(("sl82c105_resetproc(drive:%s)\n", drive->name));
-
 	pci_read_config_dword(dev, 0x40, &val);
 	val |= (CTRL_P1F16 | CTRL_P0F16);
 	pci_write_config_dword(dev, 0x40, val);
@@ -291,8 +271,6 @@ static int init_chipset_sl82c105(struct pci_dev *dev)
 {
 	u32 val;
 
-	DBG(("init_chipset_sl82c105()\n"));
-
 	pci_read_config_dword(dev, 0x40, &val);
 	val |= CTRL_P0EN | CTRL_P0F16 | CTRL_P1F16;
 	pci_write_config_dword(dev, 0x40, val);
diff --git a/drivers/ide/slc90e66.c b/drivers/ide/slc90e66.c
index 9aec78d3bcf..1ccfb40e721 100644
--- a/drivers/ide/slc90e66.c
+++ b/drivers/ide/slc90e66.c
@@ -91,8 +91,7 @@ static void slc90e66_set_dma_mode(ide_drive_t *drive, const u8 speed)
 
 		if (!(reg48 & u_flag))
 			pci_write_config_word(dev, 0x48, reg48|u_flag);
-		/* FIXME: (reg4a & a_speed) ? */
-		if ((reg4a & u_speed) != u_speed) {
+		if ((reg4a & a_speed) != u_speed) {
 			pci_write_config_word(dev, 0x4a, reg4a & ~a_speed);
 			pci_read_config_word(dev, 0x4a, &reg4a);
 			pci_write_config_word(dev, 0x4a, reg4a|u_speed);
diff --git a/drivers/ide/tx4938ide.c b/drivers/ide/tx4938ide.c
index ea89fddeed9..fd59c0d235b 100644
--- a/drivers/ide/tx4938ide.c
+++ b/drivers/ide/tx4938ide.c
@@ -146,7 +146,7 @@ static int __init tx4938ide_probe(struct platform_device *pdev)
 		return -ENODEV;
 
 	if (!devm_request_mem_region(&pdev->dev, res->start,
-				     res->end - res->start + 1, "tx4938ide"))
+				     resource_size(res), "tx4938ide"))
 		return -EBUSY;
 	mapbase = (unsigned long)devm_ioremap(&pdev->dev, res->start,
 					      8 << pdata->ioport_shift);
diff --git a/include/linux/ide.h b/include/linux/ide.h
index e4135d6e055..0ec61295904 100644
--- a/include/linux/ide.h
+++ b/include/linux/ide.h
@@ -125,8 +125,8 @@ struct ide_io_ports {
  * Timeouts for various operations:
  */
 enum {
-	/* spec allows up to 20ms */
-	WAIT_DRQ	= HZ / 10,	/* 100ms */
+	/* spec allows up to 20ms, but CF cards and SSD drives need more */
+	WAIT_DRQ	= 1 * HZ,	/* 1s */
 	/* some laptops are very slow */
 	WAIT_READY	= 5 * HZ,	/* 5s */
 	/* should be less than 3ms (?), if all ATAPI CD is closed at boot */