ARM: OMAP: Enable GPIO debounce clock only when debounce is enabled v3

This patch changes gpio "driver" to enable debounce clock for
gpio-bank only when debounce is enabled for some gpio in that bank.

Gpio functional clocks are also renamed in clock tree, gpioX_fck ->
gpioX_dbck.

This patch triggers problem with gpio wake-up and Omap3. Gpios in PER
domain aren't capable to generate wake-up if PER domain is in sleep
state. For this iopad wake-up should be used and needed pad
configuration should be done. Enabling iopad wake-up for gpio pads is
left for bootloader or omap mux configuration in kernel.

Signed-off-by: Jouni Hogander <jouni.hogander@nokia.com>
Acked-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

1 files changed, 15 insertions, 11 deletions

diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c
index 424049d83fb..66e364738fb 100644
--- a/arch/arm/plat-omap/gpio.c
+++ b/arch/arm/plat-omap/gpio.c
@@ -152,6 +152,7 @@ struct gpio_bank {
 	u32 level_mask;
 	spinlock_t lock;
 	struct gpio_chip chip;
+	struct clk *dbck;
 };
 
 #define METHOD_MPUIO		0
@@ -484,10 +485,15 @@ void omap_set_gpio_debounce(int gpio, int enable)
 	reg += OMAP24XX_GPIO_DEBOUNCE_EN;
 	val = __raw_readl(reg);
 
-	if (enable)
+	if (enable && !(val & l))
 		val |= l;
-	else
+	else if (!enable && val & l)
 		val &= ~l;
+	else
+		return;
+
+	if (cpu_is_omap34xx())
+		enable ? clk_enable(bank->dbck) : clk_disable(bank->dbck);
 
 	__raw_writel(val, reg);
 }
@@ -1296,7 +1302,6 @@ static struct clk * gpio5_fck;
 #endif
 
 #if defined(CONFIG_ARCH_OMAP3)
-static struct clk *gpio_fclks[OMAP34XX_NR_GPIOS];
 static struct clk *gpio_iclks[OMAP34XX_NR_GPIOS];
 #endif
 
@@ -1310,9 +1315,7 @@ static int __init _omap_gpio_init(void)
 	int i;
 	int gpio = 0;
 	struct gpio_bank *bank;
-#if defined(CONFIG_ARCH_OMAP3)
 	char clk_name[11];
-#endif
 
 	initialized = 1;
 
@@ -1367,12 +1370,6 @@ static int __init _omap_gpio_init(void)
 				printk(KERN_ERR "Could not get %s\n", clk_name);
 			else
 				clk_enable(gpio_iclks[i]);
-			sprintf(clk_name, "gpio%d_fck", i + 1);
-			gpio_fclks[i] = clk_get(NULL, clk_name);
-			if (IS_ERR(gpio_fclks[i]))
-				printk(KERN_ERR "Could not get %s\n", clk_name);
-			else
-				clk_enable(gpio_fclks[i]);
 		}
 	}
 #endif
@@ -1511,6 +1508,13 @@ static int __init _omap_gpio_init(void)
 		}
 		set_irq_chained_handler(bank->irq, gpio_irq_handler);
 		set_irq_data(bank->irq, bank);
+
+		if (cpu_is_omap34xx()) {
+			sprintf(clk_name, "gpio%d_dbck", i + 1);
+			bank->dbck = clk_get(NULL, clk_name);
+			if (IS_ERR(bank->dbck))
+				printk(KERN_ERR "Could not get %s\n", clk_name);
+		}
 	}
 
 	/* Enable system clock for GPIO module.