aboutsummaryrefslogtreecommitdiff
path: root/arch/powerpc/boot
diff options
context:
space:
mode:
authorAnatolij Gustschin <agust@denx.de>2010-02-16 11:12:04 -0700
committerGrant Likely <grant.likely@secretlab.ca>2010-02-16 11:12:04 -0700
commitdcc79d7870cfc3b3f11137e040e743dc50f88acf (patch)
treedc3833fbdb6b71974dd2cfad4a6dee57a79d08ac /arch/powerpc/boot
parent5b2b6255f2fda198cd5176f6cddae600c946a87d (diff)
powerpc/mpc5121: update mpc5121ads DTS
Collects several changes needed after applying previous mpc5121 platform and driver patches: - Add mpc5121 reset module node - Clean up and fix NAND description, remove unused properties here and correct NAND flash chip size. - Clean up I2C nodes: remove obsolete "cell-index" properties, add "fsl,preserve-clocking" property - Add I2C RTC node for m41t61 RTC - Add I2C nodes for AD7414 temperature sensor and AT24C32CD3 EEPROM - Fix compatible property in DMA node - Clean up CAN nodes, remove unused "cell-index" properties - Fix compatible property in DIU node - USB node changes: - use "fsl,mpc5121-usb2-dr" compatible property only - remove "port0" and "port1" properties as these are only used for multi-port host(MHP) module which is not available on MPC5121. - use 'fsl,invert-drvvbus' and 'fsl,invert-pwr-fault' in USB node for internal PHY to specify polarities of the appropriate port pins. Signed-off-by: Piotr Ziecik <kosmo@semihalf.com> Signed-off-by: Wolfgang Denk <wd@denx.de> Signed-off-by: Detlev Zundel <dzu@denx.de> Signed-off-by: Anatolij Gustschin <agust@denx.de> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Diffstat (limited to 'arch/powerpc/boot')
-rw-r--r--arch/powerpc/boot/dts/mpc5121ads.dts55
1 files changed, 33 insertions, 22 deletions
diff --git a/arch/powerpc/boot/dts/mpc5121ads.dts b/arch/powerpc/boot/dts/mpc5121ads.dts
index c353dac3341..d2b2db7cb4a 100644
--- a/arch/powerpc/boot/dts/mpc5121ads.dts
+++ b/arch/powerpc/boot/dts/mpc5121ads.dts
@@ -62,17 +62,12 @@
interrupt-parent = < &ipic >;
#address-cells = <1>;
#size-cells = <1>;
- bank-width = <1>;
// ADS has two Hynix 512MB Nand flash chips in a single
- // stacked package .
+ // stacked package.
chips = <2>;
- nand0@0 {
- label = "nand0";
- reg = <0x00000000 0x02000000>; // first 32 MB of chip 0
- };
- nand1@20000000 {
- label = "nand1";
- reg = <0x20000000 0x02000000>; // first 32 MB of chip 1
+ nand@0 {
+ label = "nand";
+ reg = <0x00000000 0x40000000>; // 512MB + 512MB
};
};
@@ -166,6 +161,11 @@
interrupt-parent = < &ipic >;
};
+ reset@e00 { // Reset module
+ compatible = "fsl,mpc5121-reset";
+ reg = <0xe00 0x100>;
+ };
+
clock@f00 { // Clock control
compatible = "fsl,mpc5121-clock";
reg = <0xf00 0x100>;
@@ -185,17 +185,15 @@
interrupt-parent = < &ipic >;
};
- mscan@1300 {
+ can@1300 {
compatible = "fsl,mpc5121-mscan";
- cell-index = <0>;
interrupts = <12 0x8>;
interrupt-parent = < &ipic >;
reg = <0x1300 0x80>;
};
- mscan@1380 {
+ can@1380 {
compatible = "fsl,mpc5121-mscan";
- cell-index = <1>;
interrupts = <13 0x8>;
interrupt-parent = < &ipic >;
reg = <0x1380 0x80>;
@@ -205,17 +203,31 @@
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,mpc5121-i2c", "fsl-i2c";
- cell-index = <0>;
reg = <0x1700 0x20>;
interrupts = <9 0x8>;
interrupt-parent = < &ipic >;
+ fsl,preserve-clocking;
+
+ hwmon@4a {
+ compatible = "adi,ad7414";
+ reg = <0x4a>;
+ };
+
+ eeprom@50 {
+ compatible = "at,24c32";
+ reg = <0x50>;
+ };
+
+ rtc@68 {
+ compatible = "stm,m41t62";
+ reg = <0x68>;
+ };
};
i2c@1720 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,mpc5121-i2c", "fsl-i2c";
- cell-index = <1>;
reg = <0x1720 0x20>;
interrupts = <10 0x8>;
interrupt-parent = < &ipic >;
@@ -225,7 +237,6 @@
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,mpc5121-i2c", "fsl-i2c";
- cell-index = <2>;
reg = <0x1740 0x20>;
interrupts = <11 0x8>;
interrupt-parent = < &ipic >;
@@ -244,7 +255,7 @@
};
display@2100 {
- compatible = "fsl,mpc5121-diu", "fsl-diu";
+ compatible = "fsl,mpc5121-diu", "fsl,diu";
reg = <0x2100 0x100>;
interrupts = <64 0x8>;
interrupt-parent = < &ipic >;
@@ -277,7 +288,7 @@
// USB1 using external ULPI PHY
//usb@3000 {
- // compatible = "fsl,mpc5121-usb2-dr", "fsl-usb2-dr";
+ // compatible = "fsl,mpc5121-usb2-dr";
// reg = <0x3000 0x1000>;
// #address-cells = <1>;
// #size-cells = <0>;
@@ -285,12 +296,11 @@
// interrupts = <43 0x8>;
// dr_mode = "otg";
// phy_type = "ulpi";
- // port1;
//};
// USB0 using internal UTMI PHY
usb@4000 {
- compatible = "fsl,mpc5121-usb2-dr", "fsl-usb2-dr";
+ compatible = "fsl,mpc5121-usb2-dr";
reg = <0x4000 0x1000>;
#address-cells = <1>;
#size-cells = <0>;
@@ -298,7 +308,8 @@
interrupts = <44 0x8>;
dr_mode = "otg";
phy_type = "utmi_wide";
- port0;
+ fsl,invert-drvvbus;
+ fsl,invert-pwr-fault;
};
// IO control
@@ -365,7 +376,7 @@
};
dma@14000 {
- compatible = "fsl,mpc5121-dma2";
+ compatible = "fsl,mpc5121-dma";
reg = <0x14000 0x1800>;
interrupts = <65 0x8>;
interrupt-parent = < &ipic >;