sh: remove the broken SH_MPC1211 support

SH_MPC1211 has been marked as BROKEN for some time.

Unless someone is working on reviving it now, I'd therefore suggest this
patch to remove it.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

4 files changed, 0 insertions, 786 deletions

diff --git a/arch/sh/boards/mpc1211/Makefile b/arch/sh/boards/mpc1211/Makefile
deleted file mode 100644
index 8cd31b5d200..00000000000
--- a/arch/sh/boards/mpc1211/Makefile
+++ /dev/null
@@ -1,8 +0,0 @@
-#
-# Makefile for the Interface (CTP/PCI/MPC-SH02) specific parts of the kernel
-#
-
-obj-y	 := setup.o rtc.o
-
-obj-$(CONFIG_PCI) += pci.o
-
diff --git a/arch/sh/boards/mpc1211/pci.c b/arch/sh/boards/mpc1211/pci.c
deleted file mode 100644
index 23849f70f13..00000000000
--- a/arch/sh/boards/mpc1211/pci.c
+++ /dev/null
@@ -1,295 +0,0 @@
-/*
- *	Low-Level PCI Support for the MPC-1211(CTP/PCI/MPC-SH02)
- *
- *  (c) 2002-2003 Saito.K & Jeanne
- *
- *  Dustin McIntire (dustin@sensoria.com)
- *	Derived from arch/i386/kernel/pci-*.c which bore the message:
- *	(c) 1999--2000 Martin Mares <mj@ucw.cz>
- *	
- *  May be copied or modified under the terms of the GNU General Public
- *  License.  See linux/COPYING for more information.
- *
- */
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/pci.h>
-#include <linux/sched.h>
-#include <linux/ioport.h>
-#include <linux/errno.h>
-#include <linux/irq.h>
-#include <linux/interrupt.h>
-
-#include <asm/machvec.h>
-#include <asm/io.h>
-#include <asm/mpc1211/pci.h>
-
-static struct resource mpcpci_io_resource = {
-	"MPCPCI IO",
-	0x00000000,
-	0xffffffff,
-	IORESOURCE_IO
-};
-
-static struct resource mpcpci_mem_resource = {
-	"MPCPCI mem",
-	0x00000000,
-	0xffffffff,
-	IORESOURCE_MEM
-};
-
-static struct pci_ops pci_direct_conf1;
-struct pci_channel board_pci_channels[] = {
-	{&pci_direct_conf1, &mpcpci_io_resource, &mpcpci_mem_resource, 0, 256},
-	{NULL, NULL, NULL, 0, 0},
-};
-
-/*
- * Direct access to PCI hardware...
- */
-
-
-#define CONFIG_CMD(bus, devfn, where) (0x80000000 | (bus->number << 16) | (devfn << 8) | (where & ~3))
-
-/*
- * Functions for accessing PCI configuration space with type 1 accesses
- */
-static int pci_conf1_read(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 *value)
-{
-	u32 word;
-	unsigned long flags;
-
-	/* 
-	 * PCIPDR may only be accessed as 32 bit words, 
-	 * so we must do byte alignment by hand 
-	 */
-	local_irq_save(flags);
-	writel(CONFIG_CMD(bus,devfn,where), PCIPAR);
-	word = readl(PCIPDR);
-	local_irq_restore(flags);
-
-	switch (size) {
-	case 1:
-		switch (where & 0x3) {
-		case 3:
-			*value = (u8)(word >> 24);
-			break;
-		case 2:
-			*value = (u8)(word >> 16);
-			break;
-		case 1:
-			*value = (u8)(word >> 8);
-			break;
-		default:
-			*value = (u8)word;
-			break;
-		}
-		break;
-	case 2:
-		switch (where & 0x3) {
-		case 3:
-			*value = (u16)(word >> 24);
-			local_irq_save(flags);
-			writel(CONFIG_CMD(bus,devfn,(where+1)), PCIPAR);
-			word = readl(PCIPDR);
-			local_irq_restore(flags);
-			*value |= ((word & 0xff) << 8);
-			break;
-		case 2:
-			*value = (u16)(word >> 16);
-			break;
-		case 1:
-			*value = (u16)(word >> 8);
-			break;
-		default:
-			*value = (u16)word;
-			break;
-		}
-		break;
-	case 4:
-		*value = word;
-		break;
-	}
-	PCIDBG(4,"pci_conf1_read@0x%08x=0x%x\n", CONFIG_CMD(bus,devfn,where),*value); 
-	return PCIBIOS_SUCCESSFUL;    
-}
-
-/* 
- * Since MPC-1211 only does 32bit access we'll have to do a read,mask,write operation.  
- * We'll allow an odd byte offset, though it should be illegal.
- */ 
-static int pci_conf1_write(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 value)
-{
-	u32 word,mask = 0;
-	unsigned long flags;
-	u32 shift = (where & 3) * 8;
-
-	if(size == 1) {
-		mask = ((1 << 8) - 1) << shift;  // create the byte mask
-	} else if(size == 2){
-		if(shift == 24)
-			return PCIBIOS_BAD_REGISTER_NUMBER;           
-		mask = ((1 << 16) - 1) << shift;  // create the word mask
-	}
-	local_irq_save(flags);
-	writel(CONFIG_CMD(bus,devfn,where), PCIPAR);
-	if(size == 4){
-		writel(value, PCIPDR);
-		local_irq_restore(flags);
-		PCIDBG(4,"pci_conf1_write@0x%08x=0x%x\n", CONFIG_CMD(bus,devfn,where),value);
-		return PCIBIOS_SUCCESSFUL;
-	}
-	word = readl(PCIPDR);
-	word &= ~mask;
-	word |= ((value << shift) & mask);
-	writel(word, PCIPDR);
-	local_irq_restore(flags);
-	PCIDBG(4,"pci_conf1_write@0x%08x=0x%x\n", CONFIG_CMD(bus,devfn,where),word);
-	return PCIBIOS_SUCCESSFUL;
-}
-
-#undef CONFIG_CMD
-
-static struct pci_ops pci_direct_conf1 = {
-	.read =		pci_conf1_read,
-	.write = 	pci_conf1_write,
-};
-
-static void __devinit quirk_ali_ide_ports(struct pci_dev *dev)
-{
-        dev->resource[0].start = 0x1f0;
-	dev->resource[0].end   = 0x1f7;
-	dev->resource[0].flags = IORESOURCE_IO;
-        dev->resource[1].start = 0x3f6;
-	dev->resource[1].end   = 0x3f6;
-	dev->resource[1].flags = IORESOURCE_IO;
-        dev->resource[2].start = 0x170;
-	dev->resource[2].end   = 0x177;
-	dev->resource[2].flags = IORESOURCE_IO;
-        dev->resource[3].start = 0x376;
-	dev->resource[3].end   = 0x376;
-	dev->resource[3].flags = IORESOURCE_IO;
-        dev->resource[4].start = 0xf000;
-	dev->resource[4].end   = 0xf00f;
-	dev->resource[4].flags = IORESOURCE_IO;
-}
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M5229, quirk_ali_ide_ports);
-
-char * __devinit pcibios_setup(char *str)
-{
-	return str;
-}
-
-/*
- *  Called after each bus is probed, but before its children
- *  are examined.
- */
-
-void __devinit pcibios_fixup_bus(struct pci_bus *b)
-{
-	pci_read_bridge_bases(b);
-}
-
-/* 
- * 	IRQ functions 
- */
-static inline u8 bridge_swizzle(u8 pin, u8 slot)
-{
-        return (((pin-1) + slot) % 4) + 1;
-}
-
-static inline u8 bridge_swizzle_pci_1(u8 pin, u8 slot)
-{
-        return (((pin-1) - slot) & 3) + 1;
-}
-
-static u8 __init mpc1211_swizzle(struct pci_dev *dev, u8 *pinp)
-{
-	unsigned long flags;
-        u8 pin = *pinp;
-	u32 word;
-
-	for ( ; dev->bus->self; dev = dev->bus->self) {
-		if (!pin)
-			continue;
-
-		if (dev->bus->number == 1) {
-			local_irq_save(flags);
-			writel(0x80000000 | 0x2c, PCIPAR);
-			word = readl(PCIPDR);
-			local_irq_restore(flags);
-			word >>= 16;
-
-			if (word == 0x0001)
-				pin = bridge_swizzle_pci_1(pin, PCI_SLOT(dev->devfn));
-			else
-				pin = bridge_swizzle(pin, PCI_SLOT(dev->devfn));
-		} else
-			pin = bridge_swizzle(pin, PCI_SLOT(dev->devfn));
-	}
-
-	*pinp = pin;
-
-	return PCI_SLOT(dev->devfn);
-}
-
-static int __init map_mpc1211_irq(struct pci_dev *dev, u8 slot, u8 pin)
-{
-	int irq = -1;
-
-	/* now lookup the actual IRQ on a platform specific basis (pci-'platform'.c) */
-	if (dev->bus->number == 0) {
-		switch (slot) {
-		case 13:   irq =  9; break;   /* USB */
-		case 22:   irq = 10; break;   /* LAN */
-		default:   irq =  0; break;
-	  	}
-	} else {
-		switch (pin) {
-		case 0:   irq =  0; break;
-		case 1:   irq =  7; break;
-		case 2:   irq =  9; break;
-		case 3:   irq = 10; break;
-		case 4:   irq = 11; break;
-		}
-	}
-
-	if( irq < 0 ) {
-		PCIDBG(3, "PCI: Error mapping IRQ on device %s\n", pci_name(dev));
-		return irq;
-	}
-	
-	PCIDBG(2, "Setting IRQ for slot %s to %d\n", pci_name(dev), irq);
-
-	return irq;
-}
-
-void __init pcibios_fixup_irqs(void)
-{
-	pci_fixup_irqs(mpc1211_swizzle, map_mpc1211_irq);
-}
-
-void pcibios_align_resource(void *data, struct resource *res,
-			    resource_size_t size, resource_size_t align)
-{
-	resource_size_t start = res->start;
-
-	if (res->flags & IORESOURCE_IO) {
-		if (start >= 0x10000UL) {
-			if ((start & 0xffffUL) < 0x4000UL) {
-				start = (start & 0xffff0000UL) + 0x4000UL;
-			} else if ((start & 0xffffUL) >= 0xf000UL) {
-				start = (start & 0xffff0000UL) + 0x10000UL;
-			}
-			res->start = start;
-		} else {
-			if (start & 0x300) {
-				start = (start + 0x3ff) & ~0x3ff;
-				res->start = start;
-			}
-		}
-	}
-}
-
diff --git a/arch/sh/boards/mpc1211/rtc.c b/arch/sh/boards/mpc1211/rtc.c
deleted file mode 100644
index 03b123a4bba..00000000000
--- a/arch/sh/boards/mpc1211/rtc.c
+++ /dev/null
@@ -1,136 +0,0 @@
-/*
- * linux/arch/sh/kernel/rtc-mpc1211.c -- MPC-1211 on-chip RTC support
- *
- *  Copyright (C) 2002  Saito.K & Jeanne
- *
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/time.h>
-#include <linux/bcd.h>
-#include <linux/mc146818rtc.h>
-
-unsigned long get_cmos_time(void)
-{
-	unsigned int year, mon, day, hour, min, sec;
-
-	spin_lock(&rtc_lock);
-
-	do {
-		sec = CMOS_READ(RTC_SECONDS);
-		min = CMOS_READ(RTC_MINUTES);
-		hour = CMOS_READ(RTC_HOURS);
-		day = CMOS_READ(RTC_DAY_OF_MONTH);
-		mon = CMOS_READ(RTC_MONTH);
-		year = CMOS_READ(RTC_YEAR);
-	} while (sec != CMOS_READ(RTC_SECONDS));
-
-	if (!(CMOS_READ(RTC_CONTROL) & RTC_DM_BINARY) || RTC_ALWAYS_BCD) {
-		BCD_TO_BIN(sec);
-		BCD_TO_BIN(min);
-		BCD_TO_BIN(hour);
-		BCD_TO_BIN(day);
-		BCD_TO_BIN(mon);
-		BCD_TO_BIN(year);
-	}
-
-	spin_unlock(&rtc_lock);
-
-	year += 1900;
-	if (year < 1970)
-		year += 100;
-
-	return mktime(year, mon, day, hour, min, sec);
-}
-
-void mpc1211_rtc_gettimeofday(struct timeval *tv)
-{
-
-	tv->tv_sec = get_cmos_time();
-	tv->tv_usec = 0;
-}
-
-/* arc/i386/kernel/time.c */
-/*
- * In order to set the CMOS clock precisely, set_rtc_mmss has to be
- * called 500 ms after the second nowtime has started, because when
- * nowtime is written into the registers of the CMOS clock, it will
- * jump to the next second precisely 500 ms later. Check the Motorola
- * MC146818A or Dallas DS12887 data sheet for details.
- *
- * BUG: This routine does not handle hour overflow properly; it just
- *      sets the minutes. Usually you'll only notice that after reboot!
- */
-static int set_rtc_mmss(unsigned long nowtime)
-{
-	int retval = 0;
-	int real_seconds, real_minutes, cmos_minutes;
-	unsigned char save_control, save_freq_select;
-
-	/* gets recalled with irq locally disabled */
-	spin_lock(&rtc_lock);
-	save_control = CMOS_READ(RTC_CONTROL); /* tell the clock it's being set */
-	CMOS_WRITE((save_control|RTC_SET), RTC_CONTROL);
-
-	save_freq_select = CMOS_READ(RTC_FREQ_SELECT); /* stop and reset prescaler */
-	CMOS_WRITE((save_freq_select|RTC_DIV_RESET2), RTC_FREQ_SELECT);
-
-	cmos_minutes = CMOS_READ(RTC_MINUTES);
-	if (!(save_control & RTC_DM_BINARY) || RTC_ALWAYS_BCD)
-		BCD_TO_BIN(cmos_minutes);
-
-	/*
-	 * since we're only adjusting minutes and seconds,
-	 * don't interfere with hour overflow. This avoids
-	 * messing with unknown time zones but requires your
-	 * RTC not to be off by more than 15 minutes
-	 */
-	real_seconds = nowtime % 60;
-	real_minutes = nowtime / 60;
-	if (((abs(real_minutes - cmos_minutes) + 15)/30) & 1)
-		real_minutes += 30;		/* correct for half hour time zone */
-	real_minutes %= 60;
-
-	if (abs(real_minutes - cmos_minutes) < 30) {
-		if (!(save_control & RTC_DM_BINARY) || RTC_ALWAYS_BCD) {
-			BIN_TO_BCD(real_seconds);
-			BIN_TO_BCD(real_minutes);
-		}
-		CMOS_WRITE(real_seconds,RTC_SECONDS);
-		CMOS_WRITE(real_minutes,RTC_MINUTES);
-	} else {
-		printk(KERN_WARNING
-		       "set_rtc_mmss: can't update from %d to %d\n",
-		       cmos_minutes, real_minutes);
-		retval = -1;
-	}
-
-	/* The following flags have to be released exactly in this order,
-	 * otherwise the DS12887 (popular MC146818A clone with integrated
-	 * battery and quartz) will not reset the oscillator and will not
-	 * update precisely 500 ms later. You won't find this mentioned in
-	 * the Dallas Semiconductor data sheets, but who believes data
-	 * sheets anyway ...                           -- Markus Kuhn
-	 */
-	CMOS_WRITE(save_control, RTC_CONTROL);
-	CMOS_WRITE(save_freq_select, RTC_FREQ_SELECT);
-	spin_unlock(&rtc_lock);
-
-	return retval;
-}
-
-int mpc1211_rtc_settimeofday(const struct timeval *tv)
-{
-	unsigned long nowtime = tv->tv_sec;
-
-	return set_rtc_mmss(nowtime);
-}
-
-void mpc1211_time_init(void)
-{
-	rtc_sh_get_time = mpc1211_rtc_gettimeofday;
-	rtc_sh_set_time = mpc1211_rtc_settimeofday;
-}
-
diff --git a/arch/sh/boards/mpc1211/setup.c b/arch/sh/boards/mpc1211/setup.c
deleted file mode 100644
index fede36361dc..00000000000
--- a/arch/sh/boards/mpc1211/setup.c
+++ /dev/null
@@ -1,347 +0,0 @@
-/*
- * linux/arch/sh/boards/mpc1211/setup.c
- *
- * Copyright (C) 2002  Saito.K & Jeanne,  Fujii.Y
- *
- */
-
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/hdreg.h>
-#include <linux/ide.h>
-#include <linux/interrupt.h>
-#include <linux/platform_device.h>
-#include <asm/io.h>
-#include <asm/machvec.h>
-#include <asm/mpc1211/mpc1211.h>
-#include <asm/mpc1211/pci.h>
-#include <asm/mpc1211/m1543c.h>
-
-/* ALI15X3 SMBus address offsets */
-#define SMBHSTSTS   (0 + 0x3100)
-#define SMBHSTCNT   (1 + 0x3100)
-#define SMBHSTSTART (2 + 0x3100)
-#define SMBHSTCMD   (7 + 0x3100)
-#define SMBHSTADD   (3 + 0x3100)
-#define SMBHSTDAT0  (4 + 0x3100)
-#define SMBHSTDAT1  (5 + 0x3100)
-#define SMBBLKDAT   (6 + 0x3100)
-
-/* Other settings */
-#define MAX_TIMEOUT 500		/* times 1/100 sec */
-
-/* ALI15X3 command constants */
-#define ALI15X3_ABORT      0x04
-#define ALI15X3_T_OUT      0x08
-#define ALI15X3_QUICK      0x00
-#define ALI15X3_BYTE       0x10
-#define ALI15X3_BYTE_DATA  0x20
-#define ALI15X3_WORD_DATA  0x30
-#define ALI15X3_BLOCK_DATA 0x40
-#define ALI15X3_BLOCK_CLR  0x80
-
-/* ALI15X3 status register bits */
-#define ALI15X3_STS_IDLE	0x04
-#define ALI15X3_STS_BUSY	0x08
-#define ALI15X3_STS_DONE	0x10
-#define ALI15X3_STS_DEV		0x20	/* device error */
-#define ALI15X3_STS_COLL	0x40	/* collision or no response */
-#define ALI15X3_STS_TERM	0x80	/* terminated by abort */
-#define ALI15X3_STS_ERR		0xE0	/* all the bad error bits */
-
-static void __init pci_write_config(unsigned long busNo,
-				    unsigned long devNo,
-				    unsigned long fncNo,
-				    unsigned long cnfAdd,
-				    unsigned long cnfData)
-{
-	ctrl_outl((0x80000000 
-                + ((busNo & 0xff) << 16) 
-                + ((devNo & 0x1f) << 11) 
-                + ((fncNo & 0x07) <<  8) 
-		+ (cnfAdd & 0xfc)), PCIPAR);
-
-        ctrl_outl(cnfData, PCIPDR);
-}
-
-/*
-  Initialize IRQ setting
-*/
-
-static unsigned char m_irq_mask = 0xfb;
-static unsigned char s_irq_mask = 0xff;
-
-static void disable_mpc1211_irq(unsigned int irq)
-{
-	if( irq < 8) {
-		m_irq_mask |= (1 << irq);
-		outb(m_irq_mask,I8259_M_MR);
-	} else {
-		s_irq_mask |= (1 << (irq - 8));
-		outb(s_irq_mask,I8259_S_MR);
-	}
-
-}
-
-static void enable_mpc1211_irq(unsigned int irq)
-{
-	if( irq < 8) {
-		m_irq_mask &= ~(1 << irq);
-		outb(m_irq_mask,I8259_M_MR);
-	} else {
-		s_irq_mask &= ~(1 << (irq - 8));
-		outb(s_irq_mask,I8259_S_MR);
-	}
-}
-
-static inline int mpc1211_irq_real(unsigned int irq)
-{
-	int value;
-	int irqmask;
-
-	if ( irq < 8) {
-		irqmask = 1<<irq;
-		outb(0x0b,I8259_M_CR);		/* ISR register */
-		value = inb(I8259_M_CR) & irqmask;
-		outb(0x0a,I8259_M_CR);		/* back ro the IPR reg */
-		return value;
-	}
-	irqmask = 1<<(irq - 8);
-	outb(0x0b,I8259_S_CR);		/* ISR register */
-	value = inb(I8259_S_CR) & irqmask;
-	outb(0x0a,I8259_S_CR);		/* back ro the IPR reg */
-	return value;
-}
-
-static void mask_and_ack_mpc1211(unsigned int irq)
-{
-	if(irq < 8) {
-		if(m_irq_mask & (1<<irq)){
-		  if(!mpc1211_irq_real(irq)){
-		    atomic_inc(&irq_err_count)
-		    printk("spurious 8259A interrupt: IRQ %x\n",irq);
-		   }
-		} else {
-			m_irq_mask |= (1<<irq);
-		}
-		inb(I8259_M_MR);		/* DUMMY */
-		outb(m_irq_mask,I8259_M_MR);	/* disable */
-		outb(0x60+irq,I8259_M_CR);	/* EOI */
-		
-	} else {
-		if(s_irq_mask & (1<<(irq - 8))){
-		  if(!mpc1211_irq_real(irq)){
-		    atomic_inc(&irq_err_count);
-		    printk("spurious 8259A interrupt: IRQ %x\n",irq);
-		  }
-		} else {
-			s_irq_mask |= (1<<(irq - 8));
-		}
-		inb(I8259_S_MR);		/* DUMMY */
-		outb(s_irq_mask,I8259_S_MR);	/* disable */
-		outb(0x60+(irq-8),I8259_S_CR); 	/* EOI */
-		outb(0x60+2,I8259_M_CR);
-	}
-}
-
-static void end_mpc1211_irq(unsigned int irq)
-{
-	enable_mpc1211_irq(irq);
-}
-
-static unsigned int startup_mpc1211_irq(unsigned int irq)
-{
-	enable_mpc1211_irq(irq);
-	return 0;
-}
-
-static void shutdown_mpc1211_irq(unsigned int irq)
-{
-	disable_mpc1211_irq(irq);
-}
-
-static struct hw_interrupt_type mpc1211_irq_type = {
-	.typename	= "MPC1211-IRQ",
-	.startup	= startup_mpc1211_irq,
-	.shutdown	= shutdown_mpc1211_irq,
-	.enable		= enable_mpc1211_irq,
-	.disable	= disable_mpc1211_irq,
-	.ack		= mask_and_ack_mpc1211,
-	.end		= end_mpc1211_irq
-};
-
-static void make_mpc1211_irq(unsigned int irq)
-{
-	irq_desc[irq].chip = &mpc1211_irq_type;
-	irq_desc[irq].status  = IRQ_DISABLED;
-	irq_desc[irq].action  = 0;
-	irq_desc[irq].depth   = 1;
-	disable_mpc1211_irq(irq);
-}
-
-int mpc1211_irq_demux(int irq)
-{
-	unsigned int poll;
-
-	if( irq == 2 ) {
-		outb(0x0c,I8259_M_CR);
-		poll = inb(I8259_M_CR);
-		if(poll & 0x80) {
-			irq = (poll & 0x07);
-		}
-		if( irq == 2) {
-			outb(0x0c,I8259_S_CR);
-			poll = inb(I8259_S_CR);
-			irq = (poll & 0x07) + 8;
-		}
-	}
-	return irq;
-}
-
-static void __init init_mpc1211_IRQ(void)
-{
-	int i;
-	/*
-	 * Super I/O (Just mimic PC):
-	 *  1: keyboard
-	 *  3: serial 1
-	 *  4: serial 0
-	 *  5: printer
-	 *  6: floppy
-	 *  8: rtc
-	 * 10: lan
-	 * 12: mouse
-	 * 14: ide0
-	 * 15: ide1
-	 */
-
-	pci_write_config(0,0,0,0x54, 0xb0b0002d);
-	outb(0x11, I8259_M_CR); 	/* mater icw1 edge trigger  */
-	outb(0x11, I8259_S_CR);		/* slave icw1 edge trigger  */
-	outb(0x20, I8259_M_MR); 	/* m icw2 base vec 0x08	    */
-	outb(0x28, I8259_S_MR);		/* s icw2 base vec 0x70	    */
-	outb(0x04, I8259_M_MR);		/* m icw3 slave irq2	    */
-	outb(0x02, I8259_S_MR);		/* s icw3 slave id	    */
-	outb(0x01, I8259_M_MR);		/* m icw4 non buf normal eoi*/
-	outb(0x01, I8259_S_MR);		/* s icw4 non buf normal eo1*/
-	outb(0xfb, I8259_M_MR);		/* disable irq0--irq7  */
-	outb(0xff, I8259_S_MR);		/* disable irq8--irq15 */
-
-	for ( i=0; i < 16; i++) {
-		if(i != 2) {
-			make_mpc1211_irq(i);
-		}
-	}
-}
-
-static void delay1000(void)
-{
-	int i;
-
-	for (i=0; i<1000; i++)
-		ctrl_delay();
-}
-
-static int put_smb_blk(unsigned char *p, int address, int command, int no)
-{
-	int temp;
-	int timeout;
-	int i;
-
-	outb(0xff, SMBHSTSTS);
-	temp = inb(SMBHSTSTS);
-	for (timeout = 0; (timeout < MAX_TIMEOUT) && !(temp & ALI15X3_STS_IDLE); timeout++) {
-		delay1000();
-		temp = inb(SMBHSTSTS);
-	}
-	if (timeout >= MAX_TIMEOUT){
-		return -1;
-	}
-
-	outb(((address & 0x7f) << 1), SMBHSTADD);
-	outb(0xc0, SMBHSTCNT);
-	outb(command & 0xff, SMBHSTCMD);
-	outb(no & 0x1f, SMBHSTDAT0);
-
-	for(i = 1; i <= no; i++) {
-		outb(*p++, SMBBLKDAT);
-	}
-	outb(0xff, SMBHSTSTART);
-
-	temp = inb(SMBHSTSTS);
-	for (timeout = 0; (timeout < MAX_TIMEOUT) && !(temp & (ALI15X3_STS_ERR | ALI15X3_STS_DONE)); timeout++) {
-		delay1000();
-		temp = inb(SMBHSTSTS);
-	}
-	if (timeout >= MAX_TIMEOUT) {
-		return -2;
-	}
-	if ( temp & ALI15X3_STS_ERR ){
-		return -3;
-	}
-	return 0;
-}
-
-static struct resource heartbeat_resources[] = {
-	[0] = {
-		.start	= 0xa2000000,
-		.end	= 0xa2000000,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device heartbeat_device = {
-	.name		= "heartbeat",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(heartbeat_resources),
-	.resource	= heartbeat_resources,
-};
-
-static struct platform_device *mpc1211_devices[] __initdata = {
-	&heartbeat_device,
-};
-
-static int __init mpc1211_devices_setup(void)
-{
-	return platform_add_devices(mpc1211_devices,
-				    ARRAY_SIZE(mpc1211_devices));
-}
-__initcall(mpc1211_devices_setup);
-
-/* arch/sh/boards/mpc1211/rtc.c */
-void mpc1211_time_init(void);
-
-static void __init mpc1211_setup(char **cmdline_p)
-{
-	unsigned char spd_buf[128];
-
-	__set_io_port_base(PA_PCI_IO);
-
-	pci_write_config(0,0,0,0x54, 0xb0b00000);
-
-	do {
-		outb(ALI15X3_ABORT, SMBHSTCNT);
-		spd_buf[0] = 0x0c;
-		spd_buf[1] = 0x43;
-		spd_buf[2] = 0x7f;
-		spd_buf[3] = 0x03;
-		spd_buf[4] = 0x00;
-		spd_buf[5] = 0x03;
-		spd_buf[6] = 0x00;
-	} while (put_smb_blk(spd_buf, 0x69, 0, 7) < 0);
-
-	board_time_init = mpc1211_time_init;
-
-	return 0;
-}
-
-/*
- * The Machine Vector
- */
-static struct sh_machine_vector mv_mpc1211 __initmv = {
-	.mv_name		= "Interface MPC-1211(CTP/PCI/MPC-SH02)",
-	.mv_setup		= mpc1211_setup,
-	.mv_nr_irqs		= 48,
-	.mv_irq_demux		= mpc1211_irq_demux,
-	.mv_init_irq		= init_mpc1211_IRQ,
-};