[ARM] 3400/1: lpd7a40x: platform headers update

Patch from Marc Singer

Updates to the lpd7a40x platform headers.  Includes support for new
architecture, lpd7a400.

Signed-off-by: Marc Singer <elf@buici.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

2 files changed, 347 insertions, 0 deletions

diff --git a/arch/arm/mach-lh7a40x/common.h b/arch/arm/mach-lh7a40x/common.h
index ea8de7e3ab1..18e8bb4eb20 100644
--- a/arch/arm/mach-lh7a40x/common.h
+++ b/arch/arm/mach-lh7a40x/common.h
@@ -12,6 +12,7 @@ extern struct sys_timer lh7a40x_timer;
 
 extern void lh7a400_init_irq (void);
 extern void lh7a404_init_irq (void);
+extern void lh7a40x_clcd_init (void);
 extern void lh7a40x_init_board_irq (void);
 
 #define IRQ_DISPATCH(irq) desc_handle_irq((irq),(irq_desc + irq), regs)
diff --git a/arch/arm/mach-lh7a40x/lcd-panel.h b/arch/arm/mach-lh7a40x/lcd-panel.h
new file mode 100644
index 00000000000..4fb2efc4950
--- /dev/null
+++ b/arch/arm/mach-lh7a40x/lcd-panel.h
@@ -0,0 +1,346 @@
+/* lcd-panel.h
+     $Id$
+
+   written by Marc Singer
+   18 Jul 2005
+
+   Copyright (C) 2005 Marc Singer
+
+   -----------
+   DESCRIPTION
+   -----------
+
+   Only one panel may be defined at a time.
+
+   The pixel clock is calculated to be no greater than the target.
+
+   Each timing value is accompanied by a specification comment.
+
+     UNITS/MIN/TYP/MAX
+
+   Most of the units will be in clocks.
+
+   USE_RGB555
+
+     Define this macro to configure the AMBA LCD controller to use an
+     RGB555 encoding for the pels instead of the normal RGB565.
+
+   LPD9520, LPD79524, LPD7A400, LPD7A404-10, LPD7A404-11
+
+     These boards are best approximated by 555 for all panels.  Some
+     can use an extra low-order bit of blue in bit 16 of the color
+     value, but we don't have a way to communicate this non-linear
+     mapping to the kernel.
+
+*/
+
+#if !defined (__LCD_PANEL_H__)
+#    define   __LCD_PANEL_H__
+
+#if defined (MACH_LPD79520)\
+ || defined (MACH_LPD79524)\
+ || defined (MACH_LPD7A400)\
+ || defined (MACH_LPD7A404)
+# define USE_RGB555
+#endif
+
+struct clcd_panel_extra {
+	unsigned int hrmode;
+	unsigned int clsen;
+	unsigned int spsen;
+	unsigned int pcdel;
+	unsigned int revdel;
+	unsigned int lpdel;
+	unsigned int spldel;
+	unsigned int pc2del;
+};
+
+#define NS_TO_CLOCK(ns,c)	((((ns)*((c)/1000) + (1000000 - 1))/1000000))
+#define CLOCK_TO_DIV(e,c)	(((c) + (e) - 1)/(e))
+
+#if defined CONFIG_FB_ARMCLCD_SHARP_LQ035Q7DB02_HRTFT
+
+	/* Logic Product Development LCD 3.5" QVGA HRTFT -10 */
+	/* Sharp PN LQ035Q7DB02 w/HRTFT controller chip */
+
+#define PIX_CLOCK_TARGET	(6800000)
+#define PIX_CLOCK_DIVIDER	CLOCK_TO_DIV (PIX_CLOCK_TARGET, HCLK)
+#define PIX_CLOCK		(HCLK/PIX_CLOCK_DIVIDER)
+
+static struct clcd_panel lcd_panel = {
+	.mode	= {
+		.name		= "3.5in QVGA (LQ035Q7DB02)",
+		.xres		= 240,
+		.yres		= 320,
+		.pixclock	= PIX_CLOCK,
+		.left_margin	= 16,
+		.right_margin	= 21,
+		.upper_margin	= 8,			// line/8/8/8
+		.lower_margin	= 5,
+		.hsync_len	= 61,
+		.vsync_len	= NS_TO_CLOCK (60, PIX_CLOCK),
+		.vmode		= FB_VMODE_NONINTERLACED,
+	},
+	.width		= -1,
+	.height		= -1,
+	.tim2		= TIM2_IPC | (PIX_CLOCK_DIVIDER - 2),
+	.cntl		= CNTL_LCDTFT | CNTL_WATERMARK,
+	.bpp		= 16,
+};
+
+#define HAS_LCD_PANEL_EXTRA
+
+static struct clcd_panel_extra lcd_panel_extra = {
+	.hrmode = 1,
+	.clsen = 1,
+	.spsen = 1,
+	.pcdel = 8,
+	.revdel = 7,
+	.lpdel = 13,
+	.spldel = 77,
+	.pc2del = 208,
+};
+
+#endif
+
+#if defined CONFIG_FB_ARMCLCD_SHARP_LQ057Q3DC02
+
+	/* Logic Product Development LCD 5.7" QVGA -10 */
+	/* Sharp PN LQ057Q3DC02 */
+	/* QVGA mode, V/Q=LOW */
+
+/* From Sharp on 2006.1.3.  I believe some of the values are incorrect
+ * based on the datasheet.
+
+    Timing0	TIMING1		TIMING2		CONTROL
+    0x140A0C4C	0x080504EF	0x013F380D	0x00000829
+    HBP= 20	VBP=  8		BCD=  0
+    HFP= 10	VFP=  5		CPL=319
+    HSW= 12	VSW=  1		IOE=  0
+    PPL= 19	LPP=239		IPC=  1
+				IHS=  1
+				IVS=  1
+				ACB=  0
+				CSEL= 0
+				PCD= 13
+
+ */
+
+/* The full horozontal cycle (Th) is clock/360/400/450. */
+/* The full vertical   cycle (Tv) is line/251/262/280. */
+
+#define PIX_CLOCK_TARGET	(6300000) /* -/6.3/7 MHz */
+#define PIX_CLOCK_DIVIDER	CLOCK_TO_DIV (PIX_CLOCK_TARGET, HCLK)
+#define PIX_CLOCK		(HCLK/PIX_CLOCK_DIVIDER)
+
+static struct clcd_panel lcd_panel = {
+	.mode	= {
+		.name		= "5.7in QVGA (LQ057Q3DC02)",
+		.xres		= 320,
+		.yres		= 240,
+		.pixclock	= PIX_CLOCK,
+		.left_margin	= 11,
+		.right_margin	= 400-11-320-2,
+		.upper_margin	= 7,			// line/7/7/7
+		.lower_margin	= 262-7-240-2,
+		.hsync_len	= 2,			// clk/2/96/200
+		.vsync_len	= 2,			// line/2/-/34
+		.vmode		= FB_VMODE_NONINTERLACED,
+	},
+	.width		= -1,
+	.height		= -1,
+	.tim2		= TIM2_IHS | TIM2_IVS
+			| (PIX_CLOCK_DIVIDER - 2),
+	.cntl		= CNTL_LCDTFT | CNTL_WATERMARK,
+	.bpp		= 16,
+};
+
+#endif
+
+#if defined CONFIG_FB_ARMCLCD_SHARP_LQ64D343
+
+	/* Logic Product Development LCD 6.4" VGA -10 */
+	/* Sharp PN LQ64D343 */
+
+/* The full horozontal cycle (Th) is clock/750/800/900. */
+/* The full vertical   cycle (Tv) is line/515/525/560. */
+
+#define PIX_CLOCK_TARGET	(28330000)
+#define PIX_CLOCK_DIVIDER	CLOCK_TO_DIV (PIX_CLOCK_TARGET, HCLK)
+#define PIX_CLOCK		(HCLK/PIX_CLOCK_DIVIDER)
+
+static struct clcd_panel lcd_panel = {
+	.mode	= {
+		.name		= "6.4in QVGA (LQ64D343)",
+		.xres		= 640,
+		.yres		= 480,
+		.pixclock	= PIX_CLOCK,
+		.left_margin	= 32,
+		.right_margin	= 800-32-640-96,
+		.upper_margin	= 32,			// line/34/34/34
+		.lower_margin	= 540-32-480-2,
+		.hsync_len	= 96,			// clk/2/96/200
+		.vsync_len	= 2,			// line/2/-/34
+		.vmode		= FB_VMODE_NONINTERLACED,
+	},
+	.width		= -1,
+	.height		= -1,
+	.tim2		= TIM2_IHS | TIM2_IVS
+			| (PIX_CLOCK_DIVIDER - 2),
+	.cntl		= CNTL_LCDTFT | CNTL_WATERMARK,
+	.bpp		= 16,
+};
+
+#endif
+
+#if defined CONFIG_FB_ARMCLCD_SHARP_LQ10D368
+
+	/* Logic Product Development LCD 10.4" VGA -10 */
+	/* Sharp PN LQ10D368 */
+
+#define PIX_CLOCK_TARGET	(28330000)
+#define PIX_CLOCK_DIVIDER	CLOCK_TO_DIV (PIX_CLOCK_TARGET, HCLK)
+#define PIX_CLOCK		(HCLK/PIX_CLOCK_DIVIDER)
+
+static struct clcd_panel lcd_panel = {
+	.mode	= {
+		.name		= "10.4in VGA (LQ10D368)",
+		.xres		= 640,
+		.yres		= 480,
+		.pixclock	= PIX_CLOCK,
+		.left_margin	= 21,
+		.right_margin	= 15,
+		.upper_margin	= 34,
+		.lower_margin	= 5,
+		.hsync_len	= 96,
+		.vsync_len	= 16,
+		.vmode		= FB_VMODE_NONINTERLACED,
+	},
+	.width		= -1,
+	.height		= -1,
+	.tim2		= TIM2_IHS | TIM2_IVS
+			| (PIX_CLOCK_DIVIDER - 2),
+	.cntl		= CNTL_LCDTFT | CNTL_WATERMARK,
+	.bpp		= 16,
+};
+
+#endif
+
+#if defined CONFIG_FB_ARMCLCD_SHARP_LQ121S1DG41
+
+	/* Logic Product Development LCD 12.1" SVGA -10 */
+	/* Sharp PN LQ121S1DG41, was LQ121S1DG31 */
+
+/* Note that with a 99993900 Hz HCLK, it is not possible to hit the
+ * target clock frequency range of 35MHz to 42MHz. */
+
+/* If the target pixel clock is substantially lower than the panel
+ * spec, this is done to prevent the LCD display from glitching when
+ * the CPU is under load.  A pixel clock higher than 25MHz
+ * (empirically determined) will compete with the CPU for bus cycles
+ * for the Ethernet chip.  However, even a pixel clock of 10MHz
+ * competes with Compact Flash interface during some operations
+ * (fdisk, e2fsck).  And, at that speed the display may have a visible
+ * flicker. */
+
+/* The full horozontal cycle (Th) is clock/832/1056/1395. */
+
+#define PIX_CLOCK_TARGET	(20000000)
+#define PIX_CLOCK_DIVIDER	CLOCK_TO_DIV (PIX_CLOCK_TARGET, HCLK)
+#define PIX_CLOCK		(HCLK/PIX_CLOCK_DIVIDER)
+
+static struct clcd_panel lcd_panel = {
+	.mode	= {
+		.name		= "12.1in SVGA (LQ121S1DG41)",
+		.xres		= 800,
+		.yres		= 600,
+		.pixclock	= PIX_CLOCK,
+		.left_margin	= 89,		// ns/5/-/(1/PIX_CLOCK)-10
+		.right_margin	= 1056-800-89-128,
+		.upper_margin	= 23,		// line/23/23/23
+		.lower_margin	= 44,
+		.hsync_len	= 128,		// clk/2/128/200
+		.vsync_len	= 4,		// line/2/4/6
+		.vmode		= FB_VMODE_NONINTERLACED,
+	},
+	.width		= -1,
+	.height		= -1,
+	.tim2		= TIM2_IHS | TIM2_IVS
+			| (PIX_CLOCK_DIVIDER - 2),
+	.cntl		= CNTL_LCDTFT | CNTL_WATERMARK,
+	.bpp		= 16,
+};
+
+#endif
+
+#if defined CONFIG_FB_ARMCLCD_HITACHI
+
+	/* Hitachi*/
+	/* Submitted by Michele Da Rold <michele.darold@ecsproject.com> */
+
+#define PIX_CLOCK_TARGET	(49000000)
+#define PIX_CLOCK_DIVIDER	CLOCK_TO_DIV (PIX_CLOCK_TARGET, HCLK)
+#define PIX_CLOCK		(HCLK/PIX_CLOCK_DIVIDER)
+
+static struct clcd_panel lcd_panel = {
+	.mode	= {
+		.name		= "Hitachi 800x480",
+		.xres		= 800,
+		.yres		= 480,
+		.pixclock	= PIX_CLOCK,
+		.left_margin	= 88,
+		.right_margin	= 40,
+		.upper_margin	= 32,
+		.lower_margin	= 11,
+		.hsync_len	= 128,
+		.vsync_len	= 2,
+		.vmode		= FB_VMODE_NONINTERLACED,
+	},
+	.width		= -1,
+	.height		= -1,
+	.tim2		= TIM2_IPC | TIM2_IHS | TIM2_IVS
+			| (PIX_CLOCK_DIVIDER - 2),
+	.cntl		= CNTL_LCDTFT | CNTL_WATERMARK,
+	.bpp		= 16,
+};
+
+#endif
+
+
+#if defined CONFIG_FB_ARMCLCD_AUO_A070VW01_WIDE
+
+	/* AU Optotronics  A070VW01 7.0 Wide Screen color Display*/
+	/* Submitted by Michele Da Rold <michele.darold@ecsproject.com> */
+
+#define PIX_CLOCK_TARGET	(10000000)
+#define PIX_CLOCK_DIVIDER	CLOCK_TO_DIV (PIX_CLOCK_TARGET, HCLK)
+#define PIX_CLOCK		(HCLK/PIX_CLOCK_DIVIDER)
+
+static struct clcd_panel lcd_panel = {
+	.mode	= {
+		.name		= "7.0in Wide (A070VW01)",
+		.xres		= 480,
+		.yres		= 234,
+		.pixclock	= PIX_CLOCK,
+		.left_margin	= 30,
+		.right_margin	= 25,
+		.upper_margin	= 14,
+		.lower_margin	= 12,
+		.hsync_len	= 100,
+		.vsync_len	= 1,
+		.vmode		= FB_VMODE_NONINTERLACED,
+	},
+	.width		= -1,
+	.height		= -1,
+	.tim2		= TIM2_IPC | TIM2_IHS | TIM2_IVS
+			| (PIX_CLOCK_DIVIDER - 2),
+	.cntl		= CNTL_LCDTFT | CNTL_WATERMARK,
+	.bpp		= 16,
+};
+
+#endif
+
+#undef NS_TO_CLOCK
+#undef CLOCK_TO_DIV
+
+#endif  /* __LCD_PANEL_H__ */