Merge branch 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc

* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (35 commits)
  powerpc/5121: make clock debug output more readable
  powerpc/5xxx: Add common mpc5xxx_get_bus_frequency() function
  powerpc/5200: Update pcm030.dts to add i2c eeprom and delete cruft
  powerpc/5200: convert mpc52xx_psc_spi to use cs_control callback
  fbdev/xilinxfb: Fix improper casting and tighen up probe path
  usb/ps3: Add missing annotations
  powerpc: Add memory clobber to mtspr()
  powerpc: Fix invalid construct in our CPU selection Kconfig
  ps3rom: Use ps3_system_bus_[gs]et_drvdata() instead of direct access
  powerpc: Add configurable -Werror for arch/powerpc
  of_serial: Add UPF_FIXED_TYPE flag
  drivers/hvc: Add missing __devexit_p()
  net/ps3: gelic - Add missing annotations
  powerpc: Introduce macro spin_event_timeout()
  powerpc/warp: Fix ISA_DMA_THRESHOLD default
  powerpc/bootwrapper: Custom build options for XPedite52xx targets
  powerpc/85xx: Add defconfig for X-ES MPC85xx boards
  powerpc/85xx: Add dts files for X-ES MPC85xx boards
  powerpc/85xx: Add platform support for X-ES MPC85xx boards
  83xx: add support for the kmeter1 board.
  ...

3 files changed, 17 insertions, 9 deletions

diff --git a/drivers/serial/mpc52xx_uart.c b/drivers/serial/mpc52xx_uart.c
index b3feb6198d5..abbd146c50d 100644
--- a/drivers/serial/mpc52xx_uart.c
+++ b/drivers/serial/mpc52xx_uart.c
@@ -76,7 +76,6 @@
 #include <linux/of_platform.h>
 
 #include <asm/mpc52xx.h>
-#include <asm/mpc512x.h>
 #include <asm/mpc52xx_psc.h>
 
 #if defined(CONFIG_SERIAL_MPC52xx_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
@@ -254,7 +253,7 @@ static unsigned long mpc52xx_getuartclk(void *p)
 	 * but the generic serial code assumes 16
 	 * so return ipb freq / 2
 	 */
-	return mpc52xx_find_ipb_freq(p) / 2;
+	return mpc5xxx_get_bus_frequency(p) / 2;
 }
 
 static struct psc_ops mpc52xx_psc_ops = {
@@ -391,7 +390,7 @@ static void mpc512x_psc_cw_restore_ints(struct uart_port *port)
 
 static unsigned long mpc512x_getuartclk(void *p)
 {
-	return mpc512x_find_ips_freq(p);
+	return mpc5xxx_get_bus_frequency(p);
 }
 
 static struct psc_ops mpc512x_psc_ops = {
diff --git a/drivers/serial/of_serial.c b/drivers/serial/of_serial.c
index 54483cd3529..02406ba6da1 100644
--- a/drivers/serial/of_serial.c
+++ b/drivers/serial/of_serial.c
@@ -67,7 +67,7 @@ static int __devinit of_platform_serial_setup(struct of_device *ofdev,
 	port->type = type;
 	port->uartclk = *clk;
 	port->flags = UPF_SHARE_IRQ | UPF_BOOT_AUTOCONF | UPF_IOREMAP
-		| UPF_FIXED_PORT;
+		| UPF_FIXED_PORT | UPF_FIXED_TYPE;
 	port->dev = &ofdev->dev;
 	/* If current-speed was set, then try not to change it. */
 	if (spd)
diff --git a/drivers/serial/ucc_uart.c b/drivers/serial/ucc_uart.c
index 7de66c06b05..e945e780b5c 100644
--- a/drivers/serial/ucc_uart.c
+++ b/drivers/serial/ucc_uart.c
@@ -681,22 +681,27 @@ static void qe_uart_init_ucc(struct uart_qe_port *qe_port)
 	out_be16(&uccup->rccm, 0xc0ff);
 
 	/* Configure the GUMR registers for UART */
-	if (soft_uart)
+	if (soft_uart) {
 		/* Soft-UART requires a 1X multiplier for TX */
 		clrsetbits_be32(&uccp->gumr_l,
 			UCC_SLOW_GUMR_L_MODE_MASK | UCC_SLOW_GUMR_L_TDCR_MASK |
 			UCC_SLOW_GUMR_L_RDCR_MASK,
 			UCC_SLOW_GUMR_L_MODE_UART | UCC_SLOW_GUMR_L_TDCR_1 |
 			UCC_SLOW_GUMR_L_RDCR_16);
-	else
+
+		clrsetbits_be32(&uccp->gumr_h, UCC_SLOW_GUMR_H_RFW,
+			UCC_SLOW_GUMR_H_TRX | UCC_SLOW_GUMR_H_TTX);
+	} else {
 		clrsetbits_be32(&uccp->gumr_l,
 			UCC_SLOW_GUMR_L_MODE_MASK | UCC_SLOW_GUMR_L_TDCR_MASK |
 			UCC_SLOW_GUMR_L_RDCR_MASK,
 			UCC_SLOW_GUMR_L_MODE_UART | UCC_SLOW_GUMR_L_TDCR_16 |
 			UCC_SLOW_GUMR_L_RDCR_16);
 
-	clrsetbits_be32(&uccp->gumr_h, UCC_SLOW_GUMR_H_RFW,
-		UCC_SLOW_GUMR_H_TRX | UCC_SLOW_GUMR_H_TTX);
+		clrsetbits_be32(&uccp->gumr_h,
+			UCC_SLOW_GUMR_H_TRX | UCC_SLOW_GUMR_H_TTX,
+			UCC_SLOW_GUMR_H_RFW);
+	}
 
 #ifdef LOOPBACK
 	clrsetbits_be32(&uccp->gumr_l, UCC_SLOW_GUMR_L_DIAG_MASK,
@@ -706,7 +711,7 @@ static void qe_uart_init_ucc(struct uart_qe_port *qe_port)
 		UCC_SLOW_GUMR_H_CDS);
 #endif
 
-	/* Enable rx interrupts  and clear all pending events.  */
+	/* Disable rx interrupts  and clear all pending events.  */
 	out_be16(&uccp->uccm, 0);
 	out_be16(&uccp->ucce, 0xffff);
 	out_be16(&uccp->udsr, 0x7e7e);
@@ -765,6 +770,10 @@ static void qe_uart_init_ucc(struct uart_qe_port *qe_port)
 		cecr_subblock = ucc_slow_get_qe_cr_subblock(qe_port->ucc_num);
 		qe_issue_cmd(QE_INIT_TX_RX, cecr_subblock,
 			QE_CR_PROTOCOL_UNSPECIFIED, 0);
+	} else {
+		cecr_subblock = ucc_slow_get_qe_cr_subblock(qe_port->ucc_num);
+		qe_issue_cmd(QE_INIT_TX_RX, cecr_subblock,
+			QE_CR_PROTOCOL_UART, 0);
 	}
 }