[ARM] Move include/asm-arm/arch-* to arch/arm/*/include/mach

This just leaves include/asm-arm/plat-* to deal with.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

21 files changed, 0 insertions, 1102 deletions

diff --git a/include/asm-arm/arch-l7200/aux_reg.h b/include/asm-arm/arch-l7200/aux_reg.h
deleted file mode 100644
index 762cbc76c50..00000000000
--- a/include/asm-arm/arch-l7200/aux_reg.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/*
- * linux/include/asm-arm/arch-l7200/aux_reg.h
- *
- * Copyright (C) 2000 Steve Hill (sjhill@cotw.com)
- *
- * Changelog:
- *   08-02-2000	SJH	Created file
- */
-#ifndef _ASM_ARCH_AUXREG_H
-#define _ASM_ARCH_AUXREG_H
-
-#include <asm/arch/hardware.h>
-
-#define l7200aux_reg	*((volatile unsigned int *) (AUX_BASE))
-
-/*
- * Auxillary register values
- */
-#define AUX_CLEAR		0x00000000
-#define AUX_DIAG_LED_ON		0x00000002
-#define AUX_RTS_UART1		0x00000004
-#define AUX_DTR_UART1		0x00000008
-#define AUX_KBD_COLUMN_12_HIGH	0x00000010
-#define AUX_KBD_COLUMN_12_OFF	0x00000020
-#define AUX_KBD_COLUMN_13_HIGH	0x00000040
-#define AUX_KBD_COLUMN_13_OFF	0x00000080
-
-#endif
diff --git a/include/asm-arm/arch-l7200/debug-macro.S b/include/asm-arm/arch-l7200/debug-macro.S
deleted file mode 100644
index 846473318e8..00000000000
--- a/include/asm-arm/arch-l7200/debug-macro.S
+++ /dev/null
@@ -1,40 +0,0 @@
-/* linux/include/asm-arm/arch-l7200/debug-macro.S
- *
- * Debugging macro include header
- *
- *  Copyright (C) 1994-1999 Russell King
- *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
-*/
-
-		.equ	io_virt, IO_BASE
-		.equ	io_phys, IO_START
-
-		.macro	addruart,rx
-		mrc	p15, 0, \rx, c1, c0
-		tst	\rx, #1			@ MMU enabled?
-		moveq	\rx, #io_phys		@ physical base address
-		movne	\rx, #io_virt		@ virtual address
-		add	\rx, \rx, #0x00044000	@ UART1
-@		add	\rx, \rx, #0x00045000	@ UART2
-		.endm
-
-		.macro	senduart,rd,rx
-		str	\rd, [\rx, #0x0]	@ UARTDR
-		.endm
-
-		.macro	waituart,rd,rx
-1001:		ldr	\rd, [\rx, #0x18]	@ UARTFLG
-		tst	\rd, #1 << 5		@ UARTFLGUTXFF - 1 when full
-		bne	1001b
-		.endm
-
-		.macro	busyuart,rd,rx
-1001:		ldr	\rd, [\rx, #0x18]	@ UARTFLG
-		tst	\rd, #1 << 3		@ UARTFLGUBUSY - 1 when busy
-		bne	1001b
-		.endm
diff --git a/include/asm-arm/arch-l7200/dma.h b/include/asm-arm/arch-l7200/dma.h
deleted file mode 100644
index 4c7eca63f03..00000000000
--- a/include/asm-arm/arch-l7200/dma.h
+++ /dev/null
@@ -1,23 +0,0 @@
-/*
- * linux/include/asm-arm/arch-l7200/dma.h
- *
- * Copyright (C) 2000 Steve Hill (sjhill@cotw.com)
- *
- * Changelog:
- *  08-29-2000	SJH	Created
- */
-#ifndef __ASM_ARCH_DMA_H
-#define __ASM_ARCH_DMA_H
-
-/* DMA is not yet implemented! It should be the same as acorn, copy over.. */
-
-/*
- * This is the maximum DMA address that can be DMAd to.
- * There should not be more than (0xd0000000 - 0xc0000000)
- * bytes of RAM.
- */
-#define MAX_DMA_ADDRESS         0xd0000000
-
-#define DMA_S0                  0
-
-#endif /* _ASM_ARCH_DMA_H */
diff --git a/include/asm-arm/arch-l7200/entry-macro.S b/include/asm-arm/arch-l7200/entry-macro.S
deleted file mode 100644
index d5e7294df1d..00000000000
--- a/include/asm-arm/arch-l7200/entry-macro.S
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
- * include/asm-arm/arch-l7200/entry-macro.S
- *
- * Low-level IRQ helper macros for L7200-based platforms
- *
- * This file is licensed under  the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-#include <asm/arch/hardware.h>
-
-		.equ	irq_base_addr,	IO_BASE_2
-
-		.macro  disable_fiq
-		.endm
-
-		.macro  get_irqnr_preamble, base, tmp
-		.endm
-
-		.macro  arch_ret_to_user, tmp1, tmp2
-		.endm
-
-		.macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
-		mov     \irqstat, #irq_base_addr		@ Virt addr IRQ regs
-		add	\irqstat, \irqstat, #0x00001000		@ Status reg
-		ldr     \irqstat, [\irqstat, #0]		@ get interrupts
-		mov     \irqnr, #0
-1001:		tst     \irqstat, #1
-		addeq   \irqnr, \irqnr, #1
-		moveq   \irqstat, \irqstat, lsr #1
-		tsteq   \irqnr, #32
-		beq     1001b
-		teq     \irqnr, #32
-		.endm
-
diff --git a/include/asm-arm/arch-l7200/gp_timers.h b/include/asm-arm/arch-l7200/gp_timers.h
deleted file mode 100644
index 6f20962df24..00000000000
--- a/include/asm-arm/arch-l7200/gp_timers.h
+++ /dev/null
@@ -1,42 +0,0 @@
-/*
- * linux/include/asm-arm/arch-l7200/gp_timers.h
- *
- * Copyright (C) 2000 Steve Hill (sjhill@cotw.com)
- *
- * Changelog:
- *   07-28-2000	SJH	Created file
- *   08-02-2000	SJH	Used structure for registers
- */
-#ifndef _ASM_ARCH_GPTIMERS_H
-#define _ASM_ARCH_GPTIMERS_H
-
-#include <asm/arch/hardware.h>
-
-/*
- * Layout of L7200 general purpose timer registers
- */
-struct GPT_Regs {
-	unsigned int TIMERLOAD;
-	unsigned int TIMERVALUE;
-	unsigned int TIMERCONTROL;
-	unsigned int TIMERCLEAR;
-};
-
-#define GPT_BASE		(IO_BASE_2 + 0x3000)
-#define l7200_timer1_regs	((volatile struct GPT_Regs *) (GPT_BASE))
-#define l7200_timer2_regs	((volatile struct GPT_Regs *) (GPT_BASE + 0x20))
-
-/*
- * General register values
- */
-#define	GPT_PRESCALE_1		0x00000000
-#define	GPT_PRESCALE_16		0x00000004
-#define	GPT_PRESCALE_256	0x00000008
-#define GPT_MODE_FREERUN	0x00000000
-#define GPT_MODE_PERIODIC	0x00000040
-#define GPT_ENABLE		0x00000080
-#define GPT_BZTOG		0x00000100
-#define GPT_BZMOD		0x00000200
-#define GPT_LOAD_MASK 		0x0000ffff
-
-#endif
diff --git a/include/asm-arm/arch-l7200/gpio.h b/include/asm-arm/arch-l7200/gpio.h
deleted file mode 100644
index 0b63e4239bd..00000000000
--- a/include/asm-arm/arch-l7200/gpio.h
+++ /dev/null
@@ -1,105 +0,0 @@
-/****************************************************************************/
-/*
- *      linux/include/asm-arm/arch-l7200/gpio.h
- *
- *      Registers and  helper functions for the L7200 Link-Up Systems
- *      GPIO.
- *
- *      (C) Copyright 2000, S A McConnell  (samcconn@cotw.com)
- *
- *  This file is subject to the terms and conditions of the GNU General Public
- *  License. See the file COPYING in the main directory of this archive for
- *  more details.
- */
-
-/****************************************************************************/
-
-#define GPIO_OFF   0x00005000  /* Offset from IO_START to the GPIO reg's. */
-
-/* IO_START and IO_BASE are defined in hardware.h */
-
-#define GPIO_START (IO_START_2 + GPIO_OFF) /* Physical addr of the GPIO reg. */
-#define GPIO_BASE  (IO_BASE_2  + GPIO_OFF) /* Virtual addr of the GPIO reg. */
-
-/* Offsets from the start of the GPIO for all the registers. */
-#define PADR_OFF     0x000
-#define PADDR_OFF    0x004
-#define PASBSR_OFF   0x008
-#define PAEENR_OFF   0x00c
-#define PAESNR_OFF   0x010
-#define PAESTR_OFF   0x014
-#define PAIMR_OFF    0x018
-#define PAINT_OFF    0x01c
-
-#define PBDR_OFF     0x020
-#define PBDDR_OFF    0x024
-#define PBSBSR_OFF   0x028
-#define PBIMR_OFF    0x038
-#define PBINT_OFF    0x03c
-
-#define PCDR_OFF     0x040
-#define PCDDR_OFF    0x044
-#define PCSBSR_OFF   0x048
-#define PCIMR_OFF    0x058
-#define PCINT_OFF    0x05c
-
-#define PDDR_OFF     0x060
-#define PDDDR_OFF    0x064
-#define PDSBSR_OFF   0x068
-#define PDEENR_OFF   0x06c
-#define PDESNR_OFF   0x070
-#define PDESTR_OFF   0x074
-#define PDIMR_OFF    0x078
-#define PDINT_OFF    0x07c
-
-#define PEDR_OFF     0x080
-#define PEDDR_OFF    0x084
-#define PESBSR_OFF   0x088
-#define PEEENR_OFF   0x08c
-#define PEESNR_OFF   0x090
-#define PEESTR_OFF   0x094
-#define PEIMR_OFF    0x098
-#define PEINT_OFF    0x09c
-
-/* Define the GPIO registers for use by device drivers and the kernel. */
-#define PADR   (*(volatile unsigned long *)(GPIO_BASE+PADR_OFF))
-#define PADDR  (*(volatile unsigned long *)(GPIO_BASE+PADDR_OFF))
-#define PASBSR (*(volatile unsigned long *)(GPIO_BASE+PASBSR_OFF))
-#define PAEENR (*(volatile unsigned long *)(GPIO_BASE+PAEENR_OFF))
-#define PAESNR (*(volatile unsigned long *)(GPIO_BASE+PAESNR_OFF))
-#define PAESTR (*(volatile unsigned long *)(GPIO_BASE+PAESTR_OFF))
-#define PAIMR  (*(volatile unsigned long *)(GPIO_BASE+PAIMR_OFF))
-#define PAINT  (*(volatile unsigned long *)(GPIO_BASE+PAINT_OFF))
-
-#define PBDR   (*(volatile unsigned long *)(GPIO_BASE+PBDR_OFF))
-#define PBDDR  (*(volatile unsigned long *)(GPIO_BASE+PBDDR_OFF))
-#define PBSBSR (*(volatile unsigned long *)(GPIO_BASE+PBSBSR_OFF))
-#define PBIMR  (*(volatile unsigned long *)(GPIO_BASE+PBIMR_OFF))
-#define PBINT  (*(volatile unsigned long *)(GPIO_BASE+PBINT_OFF))
-
-#define PCDR   (*(volatile unsigned long *)(GPIO_BASE+PCDR_OFF))
-#define PCDDR  (*(volatile unsigned long *)(GPIO_BASE+PCDDR_OFF))
-#define PCSBSR (*(volatile unsigned long *)(GPIO_BASE+PCSBSR_OFF))
-#define PCIMR  (*(volatile unsigned long *)(GPIO_BASE+PCIMR_OFF))
-#define PCINT  (*(volatile unsigned long *)(GPIO_BASE+PCINT_OFF))
-
-#define PDDR   (*(volatile unsigned long *)(GPIO_BASE+PDDR_OFF))
-#define PDDDR  (*(volatile unsigned long *)(GPIO_BASE+PDDDR_OFF))
-#define PDSBSR (*(volatile unsigned long *)(GPIO_BASE+PDSBSR_OFF))
-#define PDEENR (*(volatile unsigned long *)(GPIO_BASE+PDEENR_OFF))
-#define PDESNR (*(volatile unsigned long *)(GPIO_BASE+PDESNR_OFF))
-#define PDESTR (*(volatile unsigned long *)(GPIO_BASE+PDESTR_OFF))
-#define PDIMR  (*(volatile unsigned long *)(GPIO_BASE+PDIMR_OFF))
-#define PDINT  (*(volatile unsigned long *)(GPIO_BASE+PDINT_OFF))
-
-#define PEDR   (*(volatile unsigned long *)(GPIO_BASE+PEDR_OFF))
-#define PEDDR  (*(volatile unsigned long *)(GPIO_BASE+PEDDR_OFF))
-#define PESBSR (*(volatile unsigned long *)(GPIO_BASE+PESBSR_OFF))
-#define PEEENR (*(volatile unsigned long *)(GPIO_BASE+PEEENR_OFF))
-#define PEESNR (*(volatile unsigned long *)(GPIO_BASE+PEESNR_OFF))
-#define PEESTR (*(volatile unsigned long *)(GPIO_BASE+PEESTR_OFF))
-#define PEIMR  (*(volatile unsigned long *)(GPIO_BASE+PEIMR_OFF))
-#define PEINT  (*(volatile unsigned long *)(GPIO_BASE+PEINT_OFF))
-
-#define VEE_EN         0x02
-#define BACKLIGHT_EN   0x04
diff --git a/include/asm-arm/arch-l7200/hardware.h b/include/asm-arm/arch-l7200/hardware.h
deleted file mode 100644
index 2ab43f3a4a8..00000000000
--- a/include/asm-arm/arch-l7200/hardware.h
+++ /dev/null
@@ -1,57 +0,0 @@
-/*
- * linux/include/asm-arm/arch-l7200/hardware.h
- *
- * Copyright (C) 2000 Rob Scott (rscott@mtrob.fdns.net)
- *                    Steve Hill (sjhill@cotw.com)
- *
- * This file contains the hardware definitions for the 
- * LinkUp Systems L7200 SOC development board.
- *
- * Changelog:
- *   02-01-2000	 RS	Created L7200 version, derived from rpc code
- *   03-21-2000	SJH	Cleaned up file
- *   04-21-2000	 RS 	Changed mapping of I/O in virtual space
- *   04-25-2000	SJH	Removed unused symbols and such
- *   05-05-2000	SJH	Complete rewrite
- *   07-31-2000	SJH	Added undocumented debug auxillary port to
- *			get at last two columns for keyboard driver
- */
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-/* Hardware addresses of major areas.
- *  *_START is the physical address
- *  *_SIZE  is the size of the region
- *  *_BASE  is the virtual address
- */
-#define RAM_START		0xf0000000
-#define RAM_SIZE		0x02000000
-#define RAM_BASE		0xc0000000
-
-#define IO_START		0x80000000      /* I/O */
-#define IO_SIZE			0x01000000
-#define IO_BASE			0xd0000000
-
-#define IO_START_2		0x90000000      /* I/O */
-#define IO_SIZE_2		0x01000000
-#define IO_BASE_2		0xd1000000
-
-#define AUX_START		0x1a000000      /* AUX PORT */
-#define AUX_SIZE 		0x01000000
-#define AUX_BASE		0xd2000000
-
-#define FLASH1_START		0x00000000      /* FLASH BANK 1 */
-#define FLASH1_SIZE 		0x01000000
-#define FLASH1_BASE		0xd3000000
-
-#define FLASH2_START		0x10000000      /* FLASH BANK 2 */
-#define FLASH2_SIZE 		0x01000000
-#define FLASH2_BASE		0xd4000000
-
-#define ISA_START		0x20000000	/* ISA */
-#define ISA_SIZE		0x20000000
-#define ISA_BASE		0xe0000000
-
-#define PCIO_BASE		IO_BASE
-
-#endif
diff --git a/include/asm-arm/arch-l7200/io.h b/include/asm-arm/arch-l7200/io.h
deleted file mode 100644
index e24a10a7ed8..00000000000
--- a/include/asm-arm/arch-l7200/io.h
+++ /dev/null
@@ -1,27 +0,0 @@
-/*
- * linux/include/asm-arm/arch-l7200/io.h
- *
- * Copyright (C) 2000 Steve Hill (sjhill@cotw.com)
- *
- * Changelog:
- *  03-21-2000	SJH	Created from linux/include/asm-arm/arch-nexuspci/io.h
- *  08-31-2000	SJH	Added in IO functions necessary for new drivers
- */
-#ifndef __ASM_ARM_ARCH_IO_H
-#define __ASM_ARM_ARCH_IO_H
-
-#include <asm/arch/hardware.h>
-
-#define IO_SPACE_LIMIT 0xffffffff
-
-/*
- * There are not real ISA nor PCI buses, so we fake it.
- */
-static inline void __iomem *__io(unsigned long addr)
-{
-	return (void __iomem *)addr;
-}
-#define __io(a)	__io(a)
-#define __mem_pci(a)		(a)
-
-#endif
diff --git a/include/asm-arm/arch-l7200/irqs.h b/include/asm-arm/arch-l7200/irqs.h
deleted file mode 100644
index 7120c016e29..00000000000
--- a/include/asm-arm/arch-l7200/irqs.h
+++ /dev/null
@@ -1,56 +0,0 @@
-/*
- * include/asm-arm/arch-l7200/irqs.h
- *
- * Copyright (C) 2000 Rob Scott (rscott@mtrob.fdns.net)
- *                    Steve Hill (sjhill@cotw.com)
- *
- * Changelog:
- *   01-02-2000 RS	Create l7200 version
- *   03-28-2000 SJH	Removed unused interrupt
- *   07-28-2000 SJH	Added pseudo-keyboard interrupt
- */
-
-/*
- * NOTE: The second timer (Timer 2) is used as the keyboard
- *       interrupt when the keyboard driver is enabled.
- */
-
-#define NR_IRQS          32
-
-#define IRQ_STWDOG        0   /* Watchdog timer */
-#define IRQ_PROG          1   /* Programmable interrupt */
-#define IRQ_DEBUG_RX      2   /* Comm Rx debug */
-#define IRQ_DEBUG_TX      3   /* Comm Tx debug */
-#define IRQ_GCTC1         4   /* Timer 1 */
-#define IRQ_GCTC2         5   /* Timer 2 / Keyboard */
-#define IRQ_DMA           6   /* DMA controller */
-#define IRQ_CLCD          7   /* Color LCD controller */
-#define IRQ_SM_RX         8   /* Smart card */
-#define IRQ_SM_TX         9   /* Smart cart */
-#define IRQ_SM_RST       10   /* Smart card */
-#define IRQ_SIB          11   /* Serial Interface Bus */
-#define IRQ_MMC          12   /* MultiMediaCard */
-#define IRQ_SSP1         13   /* Synchronous Serial Port 1 */
-#define IRQ_SSP2         14   /* Synchronous Serial Port 1 */
-#define IRQ_SPI          15   /* SPI slave */
-#define IRQ_UART_1       16   /* UART 1 */
-#define IRQ_UART_2       17   /* UART 2 */
-#define IRQ_IRDA         18   /* IRDA */
-#define IRQ_RTC_TICK     19   /* Real Time Clock tick */
-#define IRQ_RTC_ALARM    20   /* Real Time Clock alarm */
-#define IRQ_GPIO         21   /* General Purpose IO */
-#define IRQ_GPIO_DMA     22   /* General Purpose IO, DMA */
-#define IRQ_M2M          23   /* Memory to memory DMA  */
-#define IRQ_RESERVED     24   /* RESERVED, don't use */
-#define IRQ_INTF         25   /* External active low interrupt */
-#define IRQ_INT0         26   /* External active low interrupt */
-#define IRQ_INT1         27   /* External active low interrupt */
-#define IRQ_INT2         28   /* External active low interrupt */
-#define IRQ_UCB1200      29   /* Interrupt generated by UCB1200*/
-#define IRQ_BAT_LO       30   /* Low batery or external power */
-#define IRQ_MEDIA_CHG    31   /* Media change interrupt */
-
-/*
- * This is the offset of the FIQ "IRQ" numbers
- */
-#define FIQ_START	64
diff --git a/include/asm-arm/arch-l7200/memory.h b/include/asm-arm/arch-l7200/memory.h
deleted file mode 100644
index 402df637e74..00000000000
--- a/include/asm-arm/arch-l7200/memory.h
+++ /dev/null
@@ -1,29 +0,0 @@
-/*
- * linux/include/asm-arm/arch-l7200/memory.h
- *
- * Copyright (c) 2000 Steve Hill (sjhill@cotw.com)
- * Copyright (c) 2000 Rob Scott (rscott@mtrob.fdns.net)
- *
- * Changelog:
- *  03-13-2000	SJH	Created
- *  04-13-2000  RS      Changed bus macros for new addr
- *  05-03-2000  SJH     Removed bus macros and fixed virt_to_phys macro
- */
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-/*
- * Physical DRAM offset on the L7200 SDB.
- */
-#define PHYS_OFFSET     UL(0xf0000000)
-
-#define __virt_to_bus(x) __virt_to_phys(x)
-#define __bus_to_virt(x) __phys_to_virt(x)
-
-/*
- * Cache flushing area - ROM
- */
-#define FLUSH_BASE_PHYS		0x40000000
-#define FLUSH_BASE		0xdf000000
-
-#endif
diff --git a/include/asm-arm/arch-l7200/pmpcon.h b/include/asm-arm/arch-l7200/pmpcon.h
deleted file mode 100644
index 730056c194b..00000000000
--- a/include/asm-arm/arch-l7200/pmpcon.h
+++ /dev/null
@@ -1,46 +0,0 @@
-/****************************************************************************/
-/*
- *  linux/include/asm-arm/arch-l7200/pmpcon.h
- *
- *   Registers and  helper functions for the L7200 Link-Up Systems
- *   DC/DC converter register.
- *
- *   (C) Copyright 2000, S A McConnell  (samcconn@cotw.com)
- *
- *  This file is subject to the terms and conditions of the GNU General Public
- *  License. See the file COPYING in the main directory of this archive for
- *  more details.
- */
-
-/****************************************************************************/
-
-#define PMPCON_OFF 0x00006000  /* Offset from IO_START_2. */
-
-/* IO_START_2 and IO_BASE_2 are defined in hardware.h */
-
-#define PMPCON_START (IO_START_2 + PMPCON_OFF)  /* Physical address of reg. */
-#define PMPCON_BASE  (IO_BASE_2  + PMPCON_OFF)  /* Virtual address of reg. */
-
-
-#define PMPCON (*(volatile unsigned int *)(PMPCON_BASE))
-
-#define PWM2_50CYCLE 0x800
-#define CONTRAST     0x9
-
-#define PWM1H (CONTRAST)
-#define PWM1L (CONTRAST << 4)
-
-#define PMPCON_VALUE  (PWM2_50CYCLE | PWM1L | PWM1H) 
-	
-/* PMPCON = 0x811;   // too light and fuzzy
- * PMPCON = 0x844;   
- * PMPCON = 0x866;   // better color poor depth
- * PMPCON = 0x888;   // Darker but better depth 
- * PMPCON = 0x899;   // Darker even better depth
- * PMPCON = 0x8aa;   // too dark even better depth
- * PMPCON = 0X8cc;   // Way too dark
- */
-
-/* As CONTRAST value increases the greater the depth perception and
- * the darker the colors.
- */
diff --git a/include/asm-arm/arch-l7200/pmu.h b/include/asm-arm/arch-l7200/pmu.h
deleted file mode 100644
index 57faea76d1b..00000000000
--- a/include/asm-arm/arch-l7200/pmu.h
+++ /dev/null
@@ -1,125 +0,0 @@
-/****************************************************************************/
-/*
- *  linux/include/asm-arm/arch-l7200/pmu.h
- *
- *   Registers and  helper functions for the L7200 Link-Up Systems
- *   Power Management Unit (PMU).
- *
- *   (C) Copyright 2000, S A McConnell  (samcconn@cotw.com)
- *
- *  This file is subject to the terms and conditions of the GNU General Public
- *  License. See the file COPYING in the main directory of this archive for
- *  more details.
- */
-
-/****************************************************************************/
-
-#define PMU_OFF   0x00050000  /* Offset from IO_START to the PMU registers. */
-
-/* IO_START and IO_BASE are defined in hardware.h */
-
-#define PMU_START (IO_START + PMU_OFF)  /* Physical addr. of the PMU reg. */
-#define PMU_BASE  (IO_BASE  + PMU_OFF)  /* Virtual addr. of the PMU reg. */
-
-
-/* Define the PMU registers for use by device drivers and the kernel. */
-
-typedef struct {
-     unsigned int CURRENT;  /* Current configuration register */
-     unsigned int NEXT;     /* Next configuration register */
-     unsigned int reserved;
-     unsigned int RUN;      /* Run configuration register */
-     unsigned int COMM;     /* Configuration command register */
-     unsigned int SDRAM;    /* SDRAM configuration bypass register */
-} pmu_interface;
-
-#define PMU ((volatile pmu_interface *)(PMU_BASE))
-
-
-/* Macro's for reading the common register fields. */
-
-#define GET_TRANSOP(reg)  ((reg >> 25) & 0x03) /* Bits 26-25 */
-#define GET_OSCEN(reg)    ((reg >> 16) & 0x01)
-#define GET_OSCMUX(reg)   ((reg >> 15) & 0x01)
-#define GET_PLLMUL(reg)   ((reg >>  9) & 0x3f) /* Bits 14-9 */
-#define GET_PLLEN(reg)    ((reg >>  8) & 0x01)
-#define GET_PLLMUX(reg)   ((reg >>  7) & 0x01)
-#define GET_BCLK_DIV(reg) ((reg >>  3) & 0x03) /* Bits 4-3 */
-#define GET_SDRB_SEL(reg) ((reg >>  2) & 0x01)
-#define GET_SDRF_SEL(reg) ((reg >>  1) & 0x01)
-#define GET_FASTBUS(reg)  (reg & 0x1)
-
-/* CFG_NEXT register */
-
-#define CFG_NEXT_CLOCKRECOVERY ((PMU->NEXT >> 18) & 0x7f)   /* Bits 24-18 */
-#define CFG_NEXT_INTRET        ((PMU->NEXT >> 17) & 0x01)
-#define CFG_NEXT_SDR_STOP      ((PMU->NEXT >>  6) & 0x01)
-#define CFG_NEXT_SYSCLKEN      ((PMU->NEXT >>  5) & 0x01)
-
-/* Useful field values that can be used to construct the
- * CFG_NEXT and CFG_RUN registers.
- */
-
-#define TRANSOP_NOP      0<<25  /* NOCHANGE_NOSTALL */
-#define NOCHANGE_STALL   1<<25
-#define CHANGE_NOSTALL   2<<25
-#define CHANGE_STALL     3<<25
-
-#define INTRET           1<<17
-#define OSCEN            1<<16
-#define OSCMUX           1<<15
-
-/* PLL frequencies */
-
-#define PLLMUL_0         0<<9         /*  3.6864 MHz */
-#define PLLMUL_1         1<<9         /*  ?????? MHz */
-#define PLLMUL_5         5<<9         /*  18.432 MHz */
-#define PLLMUL_10       10<<9         /*  36.864 MHz */
-#define PLLMUL_18       18<<9         /*  ?????? MHz */
-#define PLLMUL_20       20<<9         /*  73.728 MHz */
-#define PLLMUL_32       32<<9         /*  ?????? MHz */
-#define PLLMUL_35       35<<9         /* 129.024 MHz */
-#define PLLMUL_36       36<<9         /*  ?????? MHz */
-#define PLLMUL_39       39<<9         /*  ?????? MHz */
-#define PLLMUL_40       40<<9         /* 147.456 MHz */
-
-/* Clock recovery times */
-
-#define CRCLOCK_1        1<<18
-#define CRCLOCK_2        2<<18
-#define CRCLOCK_4        4<<18
-#define CRCLOCK_8        8<<18
-#define CRCLOCK_16      16<<18
-#define CRCLOCK_32      32<<18
-#define CRCLOCK_63      63<<18
-#define CRCLOCK_127    127<<18
-
-#define PLLEN            1<<8
-#define PLLMUX           1<<7
-#define SDR_STOP         1<<6
-#define SYSCLKEN         1<<5
-
-#define BCLK_DIV_4       2<<3
-#define BCLK_DIV_2       1<<3
-#define BCLK_DIV_1       0<<3
-
-#define SDRB_SEL         1<<2
-#define SDRF_SEL         1<<1
-#define FASTBUS          1<<0
-
-
-/* CFG_SDRAM */
-
-#define SDRREFFQ         1<<0  /* Only if SDRSTOPRQ is not set. */
-#define SDRREFACK        1<<1  /* Read-only */
-#define SDRSTOPRQ        1<<2  /* Only if SDRREFFQ is not set. */
-#define SDRSTOPACK       1<<3  /* Read-only */
-#define PICEN            1<<4  /* Enable Co-procesor */
-#define PICTEST          1<<5
-
-#define GET_SDRREFFQ    ((PMU->SDRAM >> 0) & 0x01)
-#define GET_SDRREFACK   ((PMU->SDRAM >> 1) & 0x01) /* Read-only */
-#define GET_SDRSTOPRQ   ((PMU->SDRAM >> 2) & 0x01)
-#define GET_SDRSTOPACK  ((PMU->SDRAM >> 3) & 0x01) /* Read-only */
-#define GET_PICEN       ((PMU->SDRAM >> 4) & 0x01)
-#define GET_PICTEST     ((PMU->SDRAM >> 5) & 0x01)
diff --git a/include/asm-arm/arch-l7200/serial.h b/include/asm-arm/arch-l7200/serial.h
deleted file mode 100644
index defb8b7fca7..00000000000
--- a/include/asm-arm/arch-l7200/serial.h
+++ /dev/null
@@ -1,37 +0,0 @@
-/*
- * linux/include/asm-arm/arch-l7200/serial.h
- *
- * Copyright (c) 2000 Rob Scott (rscott@mtrob.fdns.net)
- *                    Steve Hill (sjhill@cotw.com)
- *
- * Changelog:
- *  03-20-2000  SJH     Created
- *  03-26-2000  SJH     Added flags for serial ports
- *  03-27-2000  SJH     Corrected BASE_BAUD value
- *  04-14-2000  RS      Made register addr dependent on IO_BASE
- *  05-03-2000  SJH     Complete rewrite
- *  05-09-2000	SJH	Stripped out architecture specific serial stuff
- *                      and placed it in a separate file
- *  07-28-2000	SJH	Moved base baud rate variable
- */
-#ifndef __ASM_ARCH_SERIAL_H
-#define __ASM_ARCH_SERIAL_H
-
-/*
- * This assumes you have a 3.6864 MHz clock for your UART.
- */
-#define BASE_BAUD	3686400
-
-/*
- * Standard COM flags
- */
-#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST)
-
-#define STD_SERIAL_PORT_DEFNS		\
-	/* MAGIC UART CLK   PORT       IRQ     FLAGS */			\
-	{ 0, BASE_BAUD, UART1_BASE, IRQ_UART_1, STD_COM_FLAGS },  /* ttyLU0 */ \
-	{ 0, BASE_BAUD, UART2_BASE, IRQ_UART_2, STD_COM_FLAGS },  /* ttyLU1 */ \
-
-#define EXTRA_SERIAL_PORT_DEFNS
-
-#endif
diff --git a/include/asm-arm/arch-l7200/serial_l7200.h b/include/asm-arm/arch-l7200/serial_l7200.h
deleted file mode 100644
index b1008a9d23e..00000000000
--- a/include/asm-arm/arch-l7200/serial_l7200.h
+++ /dev/null
@@ -1,101 +0,0 @@
-/*
- * linux/include/asm-arm/arch-l7200/serial_l7200.h
- *
- * Copyright (c) 2000 Steven Hill (sjhill@cotw.com)
- *
- * Changelog:
- *  05-09-2000	SJH	Created
- */
-#ifndef __ASM_ARCH_SERIAL_L7200_H
-#define __ASM_ARCH_SERIAL_L7200_H
-
-#include <asm/arch/memory.h>
-
-/*
- * This assumes you have a 3.6864 MHz clock for your UART.
- */
-#define BASE_BAUD 3686400
-
-/*
- * UART base register addresses
- */
-#define UART1_BASE	(IO_BASE + 0x00044000)
-#define UART2_BASE	(IO_BASE + 0x00045000)
-
-/*
- * UART register offsets
- */
-#define UARTDR			0x00	/* Tx/Rx data */
-#define RXSTAT			0x04	/* Rx status */
-#define H_UBRLCR		0x08	/* mode register high */
-#define M_UBRLCR		0x0C	/* mode reg mid (MSB of baud)*/
-#define L_UBRLCR		0x10	/* mode reg low (LSB of baud)*/
-#define UARTCON			0x14	/* control register */
-#define UARTFLG			0x18	/* flag register */
-#define UARTINTSTAT		0x1C	/* FIFO IRQ status register */
-#define UARTINTMASK		0x20	/* FIFO IRQ mask register */
-
-/*
- * UART baud rate register values
- */
-#define BR_110			0x827
-#define BR_1200			0x06e
-#define BR_2400			0x05f
-#define BR_4800			0x02f
-#define BR_9600			0x017
-#define BR_14400		0x00f
-#define BR_19200		0x00b
-#define BR_38400		0x005
-#define BR_57600		0x003
-#define BR_76800 		0x002
-#define BR_115200		0x001
-
-/*
- * Receiver status register (RXSTAT) mask values
- */
-#define RXSTAT_NO_ERR		0x00	/* No error */
-#define RXSTAT_FRM_ERR		0x01	/* Framing error */
-#define RXSTAT_PAR_ERR		0x02	/* Parity error */
-#define RXSTAT_OVR_ERR		0x04	/* Overrun error */
-
-/*
- * High byte of UART bit rate and line control register (H_UBRLCR) values
- */
-#define UBRLCR_BRK		0x01	/* generate break on tx */
-#define UBRLCR_PEN		0x02	/* enable parity */
-#define UBRLCR_PDIS		0x00	/* disable parity */
-#define UBRLCR_EVEN		0x04	/* 1= even parity,0 = odd parity */
-#define UBRLCR_STP2		0x08	/* transmit 2 stop bits */
-#define UBRLCR_FIFO		0x10	/* enable FIFO */
-#define UBRLCR_LEN5		0x60	/* word length5 */
-#define UBRLCR_LEN6		0x40	/* word length6 */
-#define UBRLCR_LEN7		0x20	/* word length7 */
-#define UBRLCR_LEN8		0x00	/* word length8 */
-
-/*
- * UART control register (UARTCON) values
- */
-#define UARTCON_UARTEN		0x01	/* Enable UART */
-#define UARTCON_DMAONERR	0x08	/* Mask RxDmaRq when errors occur */
-
-/*
- * UART flag register (UARTFLG) mask values
- */
-#define UARTFLG_UTXFF		0x20	/* Transmit FIFO full */
-#define UARTFLG_URXFE		0x10	/* Receiver FIFO empty */
-#define UARTFLG_UBUSY		0x08	/* Transmitter busy */
-#define UARTFLG_DCD		0x04	/* Data carrier detect */
-#define UARTFLG_DSR		0x02	/* Data set ready */
-#define UARTFLG_CTS		0x01	/* Clear to send */
-
-/*
- * UART interrupt status/clear registers (UARTINTSTAT/CLR) values
- */
-#define UART_TXINT		0x01	/* TX interrupt */
-#define UART_RXINT		0x02	/* RX interrupt */
-#define UART_RXERRINT		0x04	/* RX error interrupt */
-#define UART_MSINT		0x08	/* Modem Status interrupt */
-#define UART_UDINT		0x10	/* UART Disabled interrupt */
-#define UART_ALLIRQS		0x1f	/* All interrupts */
-
-#endif
diff --git a/include/asm-arm/arch-l7200/sib.h b/include/asm-arm/arch-l7200/sib.h
deleted file mode 100644
index bf4364ee253..00000000000
--- a/include/asm-arm/arch-l7200/sib.h
+++ /dev/null
@@ -1,119 +0,0 @@
-/****************************************************************************/
-/*
- *  linux/include/asm-arm/arch-l7200/sib.h
- *
- *  Registers and helper functions for the Serial Interface Bus.
- *
- *  (C) Copyright 2000, S A McConnell  (samcconn@cotw.com)
- *
- *  This file is subject to the terms and conditions of the GNU General Public
- *  License. See the file COPYING in the main directory of this archive for
- *  more details.
- */
-
-/****************************************************************************/
-
-#define SIB_OFF   0x00040000  /* Offset from IO_START to the SIB reg's. */
-
-/* IO_START and IO_BASE are defined in hardware.h */
-
-#define SIB_START (IO_START + SIB_OFF) /* Physical addr of the SIB reg. */
-#define SIB_BASE  (IO_BASE  + SIB_OFF) /* Virtual addr of the SIB reg.  */
-
-/* Offsets from the start of the SIB for all the registers. */
-
-/* Define the SIB registers for use by device drivers and the kernel. */
-
-typedef struct
-{
-     unsigned int MCCR;    /* SIB Control Register           Offset: 0x00 */
-     unsigned int RES1;    /* Reserved                       Offset: 0x04 */
-     unsigned int MCDR0;   /* SIB Data Register 0            Offset: 0x08 */
-     unsigned int MCDR1;   /* SIB Data Register 1            Offset: 0x0c */
-     unsigned int MCDR2;   /* SIB Data Register 2 (UCB1x00)  Offset: 0x10 */
-     unsigned int RES2;    /* Reserved                       Offset: 0x14 */
-     unsigned int MCSR;    /* SIB Status Register            Offset: 0x18 */
-} SIB_Interface;
-
-#define SIB ((volatile SIB_Interface *) (SIB_BASE))
-
-/* MCCR */
-
-#define INTERNAL_FREQ   9216000  /* Hertz */
-#define AUDIO_FREQ         5000  /* Hertz */
-#define TELECOM_FREQ       5000  /* Hertz */
-
-#define AUDIO_DIVIDE    (INTERNAL_FREQ / (32 * AUDIO_FREQ))
-#define TELECOM_DIVIDE  (INTERNAL_FREQ / (32 * TELECOM_FREQ))
-
-#define MCCR_ASD57      AUDIO_DIVIDE
-#define MCCR_TSD57      (TELECOM_DIVIDE << 8)
-#define MCCR_MCE        (1 << 16)             /* SIB enable */
-#define MCCR_ECS        (1 << 17)             /* External Clock Select */
-#define MCCR_ADM        (1 << 18)             /* A/D Data Sampling */
-#define MCCR_PMC        (1 << 26)             /* PIN Multiplexer Control */
-
-
-#define GET_ASD ((SIB->MCCR >>  0) & 0x3f) /* Audio Sample Rate Div. */
-#define GET_TSD ((SIB->MCCR >>  8) & 0x3f) /* Telcom Sample Rate Div. */
-#define GET_MCE ((SIB->MCCR >> 16) & 0x01) /* SIB Enable */
-#define GET_ECS ((SIB->MCCR >> 17) & 0x01) /* External Clock Select */
-#define GET_ADM ((SIB->MCCR >> 18) & 0x01) /* A/D Data Sampling Mode */
-#define GET_TTM ((SIB->MCCR >> 19) & 0x01) /* Telco Trans. FIFO I mask */ 
-#define GET_TRM ((SIB->MCCR >> 20) & 0x01) /* Telco Recv. FIFO I mask */
-#define GET_ATM ((SIB->MCCR >> 21) & 0x01) /* Audio Trans. FIFO I mask */ 
-#define GET_ARM ((SIB->MCCR >> 22) & 0x01) /* Audio Recv. FIFO I mask */
-#define GET_LBM ((SIB->MCCR >> 23) & 0x01) /* Loop Back Mode */
-#define GET_ECP ((SIB->MCCR >> 24) & 0x03) /* Extern. Clck Prescale sel */
-#define GET_PMC ((SIB->MCCR >> 26) & 0x01) /* PIN Multiplexer Control */
-#define GET_ERI ((SIB->MCCR >> 27) & 0x01) /* External Read Interrupt */
-#define GET_EWI ((SIB->MCCR >> 28) & 0x01) /* External Write Interrupt */
-
-/* MCDR0 */
-
-#define AUDIO_RECV     ((SIB->MCDR0 >> 4) & 0xfff)
-#define AUDIO_WRITE(v) ((SIB->MCDR0 = (v & 0xfff) << 4))
-
-/* MCDR1 */
-
-#define TELECOM_RECV     ((SIB->MCDR1 >> 2) & 032fff)
-#define TELECOM_WRITE(v) ((SIB->MCDR1 = (v & 0x3fff) << 2))
-
-
-/* MCSR */
-
-#define MCSR_ATU (1 << 4)  /* Audio Transmit FIFO Underrun */
-#define MCSR_ARO (1 << 5)  /* Audio Receive  FIFO Underrun */
-#define MCSR_TTU (1 << 6)  /* TELECOM Transmit FIFO Underrun */
-#define MCSR_TRO (1 << 7)  /* TELECOM Receive  FIFO Underrun */
-
-#define MCSR_CLEAR_UNDERUN_BITS (MCSR_ATU | MCSR_ARO | MCSR_TTU | MCSR_TRO)
-
-
-#define GET_ATS ((SIB->MCSR >>  0) & 0x01) /* Audio Transmit FIFO Service Req*/
-#define GET_ARS ((SIB->MCSR >>  1) & 0x01) /* Audio Recv FIFO Service Request*/
-#define GET_TTS ((SIB->MCSR >>  2) & 0x01) /* TELECOM Transmit FIFO  Flag */
-#define GET_TRS ((SIB->MCSR >>  3) & 0x01) /* TELECOM Recv FIFO Service Req. */
-#define GET_ATU ((SIB->MCSR >>  4) & 0x01) /* Audio Transmit FIFO Underrun */
-#define GET_ARO ((SIB->MCSR >>  5) & 0x01) /* Audio Receive  FIFO Underrun */
-#define GET_TTU ((SIB->MCSR >>  6) & 0x01) /* TELECOM Transmit FIFO Underrun */
-#define GET_TRO ((SIB->MCSR >>  7) & 0x01) /* TELECOM Receive  FIFO Underrun */
-#define GET_ANF ((SIB->MCSR >>  8) & 0x01) /* Audio Transmit FIFO not full */
-#define GET_ANE ((SIB->MCSR >>  9) & 0x01) /* Audio Receive FIFO not empty */
-#define GET_TNF ((SIB->MCSR >> 10) & 0x01) /* Telecom Transmit FIFO not full */
-#define GET_TNE ((SIB->MCSR >> 11) & 0x01) /* Telecom Receive FIFO not empty */
-#define GET_CWC ((SIB->MCSR >> 12) & 0x01) /* Codec Write Complete */
-#define GET_CRC ((SIB->MCSR >> 13) & 0x01) /* Codec Read Complete */
-#define GET_ACE ((SIB->MCSR >> 14) & 0x01) /* Audio Codec Enabled */
-#define GET_TCE ((SIB->MCSR >> 15) & 0x01) /* Telecom Codec Enabled */
-
-/* MCDR2 */
-
-#define MCDR2_rW               (1 << 16)
-
-#define WRITE_MCDR2(reg, data) (SIB->MCDR2 =((reg<<17)|MCDR2_rW|(data&0xffff)))
-#define MCDR2_WRITE_COMPLETE   GET_CWC
-
-#define INITIATE_MCDR2_READ(reg) (SIB->MCDR2 = (reg << 17))
-#define MCDR2_READ_COMPLETE      GET_CRC
-#define MCDR2_READ               (SIB->MCDR2 & 0xffff)
diff --git a/include/asm-arm/arch-l7200/sys-clock.h b/include/asm-arm/arch-l7200/sys-clock.h
deleted file mode 100644
index 771c774f481..00000000000
--- a/include/asm-arm/arch-l7200/sys-clock.h
+++ /dev/null
@@ -1,67 +0,0 @@
-/****************************************************************************/
-/*
- *  linux/include/asm-arm/arch-l7200/sys-clock.h
- *
- *   Registers and  helper functions for the L7200 Link-Up Systems
- *   System clocks.
- *
- *   (C) Copyright 2000, S A McConnell  (samcconn@cotw.com)
- *
- *  This file is subject to the terms and conditions of the GNU General Public
- *  License. See the file COPYING in the main directory of this archive for
- *  more details.
- */
-
-/****************************************************************************/
-
-#define SYS_CLOCK_OFF   0x00050030  /* Offset from IO_START. */
-
-/* IO_START and IO_BASE are defined in hardware.h */
-
-#define SYS_CLOCK_START (IO_START + SYS_CLCOK_OFF)  /* Physical address */
-#define SYS_CLOCK_BASE  (IO_BASE  + SYS_CLOCK_OFF)  /* Virtual address  */
-
-/* Define the interface to the SYS_CLOCK */
-
-typedef struct
-{
-     unsigned int ENABLE;
-     unsigned int ESYNC;
-     unsigned int SELECT;
-} sys_clock_interface;
-
-#define SYS_CLOCK   ((volatile sys_clock_interface *)(SYS_CLOCK_BASE))
-
-//#define CLOCK_EN    (*(volatile unsigned long *)(PMU_BASE+CLOCK_EN_OFF))
-//#define CLOCK_ESYNC (*(volatile unsigned long *)(PMU_BASE+CLOCK_ESYNC_OFF))
-//#define CLOCK_SEL   (*(volatile unsigned long *)(PMU_BASE+CLOCK_SEL_OFF))
-
-/* SYS_CLOCK -> ENABLE */
-
-#define SYN_EN          1<<0
-#define B18M_EN         1<<1
-#define CLK3M6_EN       1<<2
-#define BUART_EN        1<<3
-#define CLK18MU_EN      1<<4
-#define FIR_EN          1<<5
-#define MIRN_EN         1<<6
-#define UARTM_EN        1<<7
-#define SIBADC_EN       1<<8
-#define ALTD_EN         1<<9
-#define CLCLK_EN        1<<10
-
-/* SYS_CLOCK -> SELECT */
-
-#define CLK18M_DIV      1<<0
-#define MIR_SEL         1<<1
-#define SSP_SEL         1<<4
-#define MM_DIV          1<<5
-#define MM_SEL          1<<6
-#define ADC_SEL_2       0<<7
-#define ADC_SEL_4       1<<7
-#define ADC_SEL_8       3<<7
-#define ADC_SEL_16      7<<7
-#define ADC_SEL_32      0x0f<<7
-#define ADC_SEL_64      0x1f<<7
-#define ADC_SEL_128     0x3f<<7
-#define ALTD_SEL        1<<13
diff --git a/include/asm-arm/arch-l7200/system.h b/include/asm-arm/arch-l7200/system.h
deleted file mode 100644
index efef950a5b5..00000000000
--- a/include/asm-arm/arch-l7200/system.h
+++ /dev/null
@@ -1,29 +0,0 @@
-/*
- * linux/include/asm-arm/arch-l7200/system.h
- *
- * Copyright (c) 2000 Steve Hill (sjhill@cotw.com)
- *
- * Changelog
- *  03-21-2000  SJH	Created
- *  04-26-2000  SJH	Fixed functions
- *  05-03-2000  SJH	Removed usage of obsolete 'iomd.h'
- *  05-31-2000  SJH	Properly implemented 'arch_idle'
- */
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-#include <asm/arch/hardware.h>
-
-static inline void arch_idle(void)
-{
-	*(unsigned long *)(IO_BASE + 0x50004) = 1;	/* idle mode */
-}
-
-static inline void arch_reset(char mode)
-{
-	if (mode == 's') {
-		cpu_reset(0);
-	}
-}
-
-#endif
diff --git a/include/asm-arm/arch-l7200/time.h b/include/asm-arm/arch-l7200/time.h
deleted file mode 100644
index ea22f7fff9c..00000000000
--- a/include/asm-arm/arch-l7200/time.h
+++ /dev/null
@@ -1,73 +0,0 @@
-/*
- * linux/include/asm-arm/arch-l7200/time.h
- *
- * Copyright (C) 2000 Rob Scott (rscott@mtrob.fdns.net)
- *                    Steve Hill (sjhill@cotw.com)
- *
- * Changelog:
- *   01-02-2000	RS	Created l7200 version, derived from rpc code
- *   05-03-2000	SJH	Complete rewrite
- */
-#ifndef _ASM_ARCH_TIME_H
-#define _ASM_ARCH_TIME_H
-
-#include <asm/arch/irqs.h>
-
-/*
- * RTC base register address
- */
-#define RTC_BASE	(IO_BASE_2 + 0x2000)
-
-/*
- * RTC registers
- */
-#define RTC_RTCDR	(*(volatile unsigned char *) (RTC_BASE + 0x000))
-#define RTC_RTCMR	(*(volatile unsigned char *) (RTC_BASE + 0x004))
-#define RTC_RTCS	(*(volatile unsigned char *) (RTC_BASE + 0x008))
-#define RTC_RTCC	(*(volatile unsigned char *) (RTC_BASE + 0x008))
-#define RTC_RTCDV	(*(volatile unsigned char *) (RTC_BASE + 0x00c))
-#define RTC_RTCCR	(*(volatile unsigned char *) (RTC_BASE + 0x010))
-
-/*
- * RTCCR register values
- */
-#define RTC_RATE_32	0x00      /* 32 Hz tick */
-#define RTC_RATE_64	0x10      /* 64 Hz tick */
-#define RTC_RATE_128	0x20      /* 128 Hz tick */
-#define RTC_RATE_256	0x30      /* 256 Hz tick */
-#define RTC_EN_ALARM	0x01      /* Enable alarm */
-#define RTC_EN_TIC	0x04      /* Enable counter */
-#define RTC_EN_STWDOG	0x08      /* Enable watchdog */
-
-/*
- * Handler for RTC timer interrupt
- */
-static irqreturn_t
-timer_interrupt(int irq, void *dev_id)
-{
-	struct pt_regs *regs = get_irq_regs();
-	do_timer(1);
-#ifndef CONFIG_SMP
-	update_process_times(user_mode(regs));
-#endif
-	do_profile(regs);
-	RTC_RTCC = 0;				/* Clear interrupt */
-
-	return IRQ_HANDLED;
-}
-
-/*
- * Set up RTC timer interrupt, and return the current time in seconds.
- */
-void __init time_init(void)
-{
-	RTC_RTCC = 0;				/* Clear interrupt */
-
-	timer_irq.handler = timer_interrupt;
-
-	setup_irq(IRQ_RTC_TICK, &timer_irq);
-
-	RTC_RTCCR = RTC_RATE_128 | RTC_EN_TIC;	/* Set rate and enable timer */
-}
-
-#endif
diff --git a/include/asm-arm/arch-l7200/timex.h b/include/asm-arm/arch-l7200/timex.h
deleted file mode 100644
index 3c3202620f0..00000000000
--- a/include/asm-arm/arch-l7200/timex.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- * linux/include/asm-arm/arch-l7200/timex.h
- *
- * Copyright (C) 2000 Rob Scott (rscott@mtrob.fdns.net)
- *                    Steve Hill (sjhill@cotw.com)
- *
- * 04-21-2000  RS Created file
- * 05-03-2000 SJH Tick rate was wrong
- *
- */
-
-/*
- * On the ARM720T, clock ticks are set to 128 Hz.
- *
- * NOTE: The actual RTC value is set in 'time.h' which
- *       must be changed when choosing a different tick
- *       rate. The value of HZ in 'param.h' must also
- *       be changed to match below.
- */
-#define CLOCK_TICK_RATE		128
diff --git a/include/asm-arm/arch-l7200/uncompress.h b/include/asm-arm/arch-l7200/uncompress.h
deleted file mode 100644
index c5ba0adf4a5..00000000000
--- a/include/asm-arm/arch-l7200/uncompress.h
+++ /dev/null
@@ -1,39 +0,0 @@
-/*
- * linux/include/asm-arm/arch-l7200/uncompress.h
- *
- * Copyright (C) 2000 Steve Hill (sjhill@cotw.com)
- *
- * Changelog:
- *  05-01-2000	SJH	Created
- *  05-13-2000	SJH	Filled in function bodies
- *  07-26-2000	SJH	Removed hard coded baud rate
- */
-
-#include <asm/arch/hardware.h>
-
-#define IO_UART  IO_START + 0x00044000
-
-#define __raw_writeb(v,p)	(*(volatile unsigned char *)(p) = (v))
-#define __raw_readb(p)		(*(volatile unsigned char *)(p))
-
-static inline void putc(int c)
-{
-	while(__raw_readb(IO_UART + 0x18) & 0x20 ||
-	      __raw_readb(IO_UART + 0x18) & 0x08)
-		barrier();
-
-	__raw_writeb(c, IO_UART + 0x00);
-}
-
-static inline void flush(void)
-{
-}
-
-static __inline__ void arch_decomp_setup(void)
-{
-	__raw_writeb(0x00, IO_UART + 0x08);	/* Set HSB */
-	__raw_writeb(0x00, IO_UART + 0x20);	/* Disable IRQs */
-	__raw_writeb(0x01, IO_UART + 0x14);	/* Enable UART */
-}
-
-#define arch_decomp_wdog()
diff --git a/include/asm-arm/arch-l7200/vmalloc.h b/include/asm-arm/arch-l7200/vmalloc.h
deleted file mode 100644
index 816231eedaa..00000000000
--- a/include/asm-arm/arch-l7200/vmalloc.h
+++ /dev/null
@@ -1,4 +0,0 @@
-/*
- * linux/include/asm-arm/arch-l7200/vmalloc.h
- */
-#define VMALLOC_END       (PAGE_OFFSET + 0x10000000)