Linux-2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 148 insertions, 0 deletions

diff --git a/include/asm-ia64/sn/bte.h b/include/asm-ia64/sn/bte.h
new file mode 100644
index 00000000000..0ec27f99c18
--- /dev/null
+++ b/include/asm-ia64/sn/bte.h
@@ -0,0 +1,148 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (c) 2000-2004 Silicon Graphics, Inc.  All Rights Reserved.
+ */
+
+
+#ifndef _ASM_IA64_SN_BTE_H
+#define _ASM_IA64_SN_BTE_H
+
+#include <linux/timer.h>
+#include <linux/spinlock.h>
+#include <linux/cache.h>
+#include <asm/sn/types.h>
+
+
+/* #define BTE_DEBUG */
+/* #define BTE_DEBUG_VERBOSE */
+
+#ifdef BTE_DEBUG
+#  define BTE_PRINTK(x) printk x	/* Terse */
+#  ifdef BTE_DEBUG_VERBOSE
+#    define BTE_PRINTKV(x) printk x	/* Verbose */
+#  else
+#    define BTE_PRINTKV(x)
+#  endif /* BTE_DEBUG_VERBOSE */
+#else
+#  define BTE_PRINTK(x)
+#  define BTE_PRINTKV(x)
+#endif	/* BTE_DEBUG */
+
+
+/* BTE status register only supports 16 bits for length field */
+#define BTE_LEN_BITS (16)
+#define BTE_LEN_MASK ((1 << BTE_LEN_BITS) - 1)
+#define BTE_MAX_XFER ((1 << BTE_LEN_BITS) * L1_CACHE_BYTES)
+
+
+/* Define hardware */
+#define BTES_PER_NODE 2
+
+
+/* Define hardware modes */
+#define BTE_NOTIFY (IBCT_NOTIFY)
+#define BTE_NORMAL BTE_NOTIFY
+#define BTE_ZERO_FILL (BTE_NOTIFY | IBCT_ZFIL_MODE)
+/* Use a reserved bit to let the caller specify a wait for any BTE */
+#define BTE_WACQUIRE (0x4000)
+/* Use the BTE on the node with the destination memory */
+#define BTE_USE_DEST (BTE_WACQUIRE << 1)
+/* Use any available BTE interface on any node for the transfer */
+#define BTE_USE_ANY (BTE_USE_DEST << 1)
+/* macro to force the IBCT0 value valid */
+#define BTE_VALID_MODE(x) ((x) & (IBCT_NOTIFY | IBCT_ZFIL_MODE))
+
+#define BTE_ACTIVE		(IBLS_BUSY | IBLS_ERROR)
+#define BTE_WORD_AVAILABLE	(IBLS_BUSY << 1)
+#define BTE_WORD_BUSY		(~BTE_WORD_AVAILABLE)
+
+/*
+ * Some macros to simplify reading.
+ * Start with macros to locate the BTE control registers.
+ */
+#define BTE_LNSTAT_LOAD(_bte)						\
+			HUB_L(_bte->bte_base_addr)
+#define BTE_LNSTAT_STORE(_bte, _x)					\
+			HUB_S(_bte->bte_base_addr, (_x))
+#define BTE_SRC_STORE(_bte, _x)						\
+			HUB_S(_bte->bte_base_addr + (BTEOFF_SRC/8), (_x))
+#define BTE_DEST_STORE(_bte, _x)					\
+			HUB_S(_bte->bte_base_addr + (BTEOFF_DEST/8), (_x))
+#define BTE_CTRL_STORE(_bte, _x)					\
+			HUB_S(_bte->bte_base_addr + (BTEOFF_CTRL/8), (_x))
+#define BTE_NOTIF_STORE(_bte, _x)					\
+			HUB_S(_bte->bte_base_addr + (BTEOFF_NOTIFY/8), (_x))
+
+
+/* Possible results from bte_copy and bte_unaligned_copy */
+/* The following error codes map into the BTE hardware codes
+ * IIO_ICRB_ECODE_* (in shubio.h). The hardware uses
+ * an error code of 0 (IIO_ICRB_ECODE_DERR), but we want zero
+ * to mean BTE_SUCCESS, so add one (BTEFAIL_OFFSET) to the error
+ * codes to give the following error codes.
+ */
+#define BTEFAIL_OFFSET	1
+
+typedef enum {
+	BTE_SUCCESS,		/* 0 is success */
+	BTEFAIL_DIR,		/* Directory error due to IIO access*/
+	BTEFAIL_POISON,		/* poison error on IO access (write to poison page) */
+	BTEFAIL_WERR,		/* Write error (ie WINV to a Read only line) */
+	BTEFAIL_ACCESS,		/* access error (protection violation) */
+	BTEFAIL_PWERR,		/* Partial Write Error */
+	BTEFAIL_PRERR,		/* Partial Read Error */
+	BTEFAIL_TOUT,		/* CRB Time out */
+	BTEFAIL_XTERR,		/* Incoming xtalk pkt had error bit */
+	BTEFAIL_NOTAVAIL,	/* BTE not available */
+} bte_result_t;
+
+
+/*
+ * Structure defining a bte.  An instance of this
+ * structure is created in the nodepda for each
+ * bte on that node (as defined by BTES_PER_NODE)
+ * This structure contains everything necessary
+ * to work with a BTE.
+ */
+struct bteinfo_s {
+	volatile u64 notify ____cacheline_aligned;
+	u64 *bte_base_addr ____cacheline_aligned;
+	spinlock_t spinlock;
+	cnodeid_t bte_cnode;	/* cnode                            */
+	int bte_error_count;	/* Number of errors encountered     */
+	int bte_num;		/* 0 --> BTE0, 1 --> BTE1           */
+	int cleanup_active;	/* Interface is locked for cleanup  */
+	volatile bte_result_t bh_error;	/* error while processing   */
+	volatile u64 *most_rcnt_na;
+};
+
+
+/*
+ * Function prototypes (functions defined in bte.c, used elsewhere)
+ */
+extern bte_result_t bte_copy(u64, u64, u64, u64, void *);
+extern bte_result_t bte_unaligned_copy(u64, u64, u64, u64);
+extern void bte_error_handler(unsigned long);
+
+#define bte_zero(dest, len, mode, notification) \
+	bte_copy(0, dest, len, ((mode) | BTE_ZERO_FILL), notification)
+
+/*
+ * The following is the prefered way of calling bte_unaligned_copy
+ * If the copy is fully cache line aligned, then bte_copy is
+ * used instead.  Since bte_copy is inlined, this saves a call
+ * stack.  NOTE: bte_copy is called synchronously and does block
+ * until the transfer is complete.  In order to get the asynch
+ * version of bte_copy, you must perform this check yourself.
+ */
+#define BTE_UNALIGNED_COPY(src, dest, len, mode)                        \
+	(((len & L1_CACHE_MASK) || (src & L1_CACHE_MASK) ||             \
+	  (dest & L1_CACHE_MASK)) ?                                     \
+	 bte_unaligned_copy(src, dest, len, mode) :              	\
+	 bte_copy(src, dest, len, mode, NULL))
+
+
+#endif	/* _ASM_IA64_SN_BTE_H */