diff options
| -rw-r--r-- | drivers/net/tulip/dmfe.c | 58 |
1 files changed, 40 insertions, 18 deletions
diff --git a/drivers/net/tulip/dmfe.c b/drivers/net/tulip/dmfe.c index afd5e527032..24a29c99ba9 100644 --- a/drivers/net/tulip/dmfe.c +++ b/drivers/net/tulip/dmfe.c @@ -248,7 +248,6 @@ struct dmfe_board_info { u8 media_mode; /* user specify media mode */ u8 op_mode; /* real work media mode */ u8 phy_addr; - u8 link_failed; /* Ever link failed */ u8 wait_reset; /* Hardware failed, need to reset */ u8 dm910x_chk_mode; /* Operating mode check */ u8 first_in_callback; /* Flag to record state */ @@ -447,6 +446,7 @@ static int __devinit dmfe_init_one (struct pci_dev *pdev, dev->poll_controller = &poll_dmfe; #endif dev->ethtool_ops = &netdev_ethtool_ops; + netif_carrier_off(dev); spin_lock_init(&db->lock); pci_read_config_dword(pdev, 0x50, &pci_pmr); @@ -541,7 +541,6 @@ static int dmfe_open(struct DEVICE *dev) db->tx_packet_cnt = 0; db->tx_queue_cnt = 0; db->rx_avail_cnt = 0; - db->link_failed = 1; db->wait_reset = 0; db->first_in_callback = 0; @@ -1082,6 +1081,7 @@ static void netdev_get_drvinfo(struct net_device *dev, static const struct ethtool_ops netdev_ethtool_ops = { .get_drvinfo = netdev_get_drvinfo, + .get_link = ethtool_op_get_link, }; /* @@ -1097,6 +1097,8 @@ static void dmfe_timer(unsigned long data) struct dmfe_board_info *db = netdev_priv(dev); unsigned long flags; + int link_ok, link_ok_phy; + DMFE_DBUG(0, "dmfe_timer()", 0); spin_lock_irqsave(&db->lock, flags); @@ -1168,15 +1170,35 @@ static void dmfe_timer(unsigned long data) (db->chip_revision == 0x02000010)) ) { /* DM9102A Chip */ if (tmp_cr12 & 2) - tmp_cr12 = 0x0; /* Link failed */ + link_ok = 0; else - tmp_cr12 = 0x3; /* Link OK */ + link_ok = 1; } + else + /*0x43 is used instead of 0x3 because bit 6 should represent + link status of external PHY */ + link_ok = (tmp_cr12 & 0x43) ? 1 : 0; + + + /* If chip reports that link is failed it could be because external + PHY link status pin is not conected correctly to chip + To be sure ask PHY too. + */ + + /* need a dummy read because of PHY's register latch*/ + phy_read (db->ioaddr, db->phy_addr, 1, db->chip_id); + link_ok_phy = (phy_read (db->ioaddr, + db->phy_addr, 1, db->chip_id) & 0x4) ? 1 : 0; + + if (link_ok_phy != link_ok) { + DMFE_DBUG (0, "PHY and chip report different link status", 0); + link_ok = link_ok | link_ok_phy; + } - if ( !(tmp_cr12 & 0x3) && !db->link_failed ) { + if ( !link_ok && netif_carrier_ok(dev)) { /* Link Failed */ DMFE_DBUG(0, "Link Failed", tmp_cr12); - db->link_failed = 1; + netif_carrier_off(dev); /* For Force 10/100M Half/Full mode: Enable Auto-Nego mode */ /* AUTO or force 1M Homerun/Longrun don't need */ @@ -1191,19 +1213,19 @@ static void dmfe_timer(unsigned long data) db->cr6_data&=~0x00000200; /* bit9=0, HD mode */ update_cr6(db->cr6_data, db->ioaddr); } - } else - if ((tmp_cr12 & 0x3) && db->link_failed) { - DMFE_DBUG(0, "Link link OK", tmp_cr12); - db->link_failed = 0; - - /* Auto Sense Speed */ - if ( (db->media_mode & DMFE_AUTO) && - dmfe_sense_speed(db) ) - db->link_failed = 1; - dmfe_process_mode(db); - /* SHOW_MEDIA_TYPE(db->op_mode); */ + } else if (!netif_carrier_ok(dev)) { + + DMFE_DBUG(0, "Link link OK", tmp_cr12); + + /* Auto Sense Speed */ + if ( !(db->media_mode & DMFE_AUTO) || !dmfe_sense_speed(db)) { + netif_carrier_on(dev); + SHOW_MEDIA_TYPE(db->op_mode); } + dmfe_process_mode(db); + } + /* HPNA remote command check */ if (db->HPNA_command & 0xf00) { db->HPNA_timer--; @@ -1248,7 +1270,7 @@ static void dmfe_dynamic_reset(struct DEVICE *dev) db->tx_packet_cnt = 0; db->tx_queue_cnt = 0; db->rx_avail_cnt = 0; - db->link_failed = 1; + netif_carrier_off(dev); db->wait_reset = 0; /* Re-initilize DM910X board */ |