diff options
| -rw-r--r-- | fs/Kconfig | 190 | ||||
| -rw-r--r-- | fs/jffs2/Kconfig | 188 |
2 files changed, 189 insertions, 189 deletions
diff --git a/fs/Kconfig b/fs/Kconfig index d3873583360..5831f9c3884 100644 --- a/fs/Kconfig +++ b/fs/Kconfig @@ -1136,195 +1136,7 @@ config EFS_FS To compile the EFS file system support as a module, choose M here: the module will be called efs. -config JFFS2_FS - tristate "Journalling Flash File System v2 (JFFS2) support" - select CRC32 - depends on MTD - help - JFFS2 is the second generation of the Journalling Flash File System - for use on diskless embedded devices. It provides improved wear - levelling, compression and support for hard links. You cannot use - this on normal block devices, only on 'MTD' devices. - - Further information on the design and implementation of JFFS2 is - available at <http://sources.redhat.com/jffs2/>. - -config JFFS2_FS_DEBUG - int "JFFS2 debugging verbosity (0 = quiet, 2 = noisy)" - depends on JFFS2_FS - default "0" - help - This controls the amount of debugging messages produced by the JFFS2 - code. Set it to zero for use in production systems. For evaluation, - testing and debugging, it's advisable to set it to one. This will - enable a few assertions and will print debugging messages at the - KERN_DEBUG loglevel, where they won't normally be visible. Level 2 - is unlikely to be useful - it enables extra debugging in certain - areas which at one point needed debugging, but when the bugs were - located and fixed, the detailed messages were relegated to level 2. - - If reporting bugs, please try to have available a full dump of the - messages at debug level 1 while the misbehaviour was occurring. - -config JFFS2_FS_WRITEBUFFER - bool "JFFS2 write-buffering support" - depends on JFFS2_FS - default y - help - This enables the write-buffering support in JFFS2. - - This functionality is required to support JFFS2 on the following - types of flash devices: - - NAND flash - - NOR flash with transparent ECC - - DataFlash - -config JFFS2_FS_WBUF_VERIFY - bool "Verify JFFS2 write-buffer reads" - depends on JFFS2_FS_WRITEBUFFER - default n - help - This causes JFFS2 to read back every page written through the - write-buffer, and check for errors. - -config JFFS2_SUMMARY - bool "JFFS2 summary support (EXPERIMENTAL)" - depends on JFFS2_FS && EXPERIMENTAL - default n - help - This feature makes it possible to use summary information - for faster filesystem mount. - - The summary information can be inserted into a filesystem image - by the utility 'sumtool'. - - If unsure, say 'N'. - -config JFFS2_FS_XATTR - bool "JFFS2 XATTR support (EXPERIMENTAL)" - depends on JFFS2_FS && EXPERIMENTAL - default n - help - Extended attributes are name:value pairs associated with inodes by - the kernel or by users (see the attr(5) manual page, or visit - <http://acl.bestbits.at/> for details). - - If unsure, say N. - -config JFFS2_FS_POSIX_ACL - bool "JFFS2 POSIX Access Control Lists" - depends on JFFS2_FS_XATTR - default y - select FS_POSIX_ACL - help - Posix Access Control Lists (ACLs) support permissions for users and - groups beyond the owner/group/world scheme. - - To learn more about Access Control Lists, visit the Posix ACLs for - Linux website <http://acl.bestbits.at/>. - - If you don't know what Access Control Lists are, say N - -config JFFS2_FS_SECURITY - bool "JFFS2 Security Labels" - depends on JFFS2_FS_XATTR - default y - help - Security labels support alternative access control models - implemented by security modules like SELinux. This option - enables an extended attribute handler for file security - labels in the jffs2 filesystem. - - If you are not using a security module that requires using - extended attributes for file security labels, say N. - -config JFFS2_COMPRESSION_OPTIONS - bool "Advanced compression options for JFFS2" - depends on JFFS2_FS - default n - help - Enabling this option allows you to explicitly choose which - compression modules, if any, are enabled in JFFS2. Removing - compressors can mean you cannot read existing file systems, - and enabling experimental compressors can mean that you - write a file system which cannot be read by a standard kernel. - - If unsure, you should _definitely_ say 'N'. - -config JFFS2_ZLIB - bool "JFFS2 ZLIB compression support" if JFFS2_COMPRESSION_OPTIONS - select ZLIB_INFLATE - select ZLIB_DEFLATE - depends on JFFS2_FS - default y - help - Zlib is designed to be a free, general-purpose, legally unencumbered, - lossless data-compression library for use on virtually any computer - hardware and operating system. See <http://www.gzip.org/zlib/> for - further information. - - Say 'Y' if unsure. - -config JFFS2_LZO - bool "JFFS2 LZO compression support" if JFFS2_COMPRESSION_OPTIONS - select LZO_COMPRESS - select LZO_DECOMPRESS - depends on JFFS2_FS - default n - help - minilzo-based compression. Generally works better than Zlib. - - This feature was added in July, 2007. Say 'N' if you need - compatibility with older bootloaders or kernels. - -config JFFS2_RTIME - bool "JFFS2 RTIME compression support" if JFFS2_COMPRESSION_OPTIONS - depends on JFFS2_FS - default y - help - Rtime does manage to recompress already-compressed data. Say 'Y' if unsure. - -config JFFS2_RUBIN - bool "JFFS2 RUBIN compression support" if JFFS2_COMPRESSION_OPTIONS - depends on JFFS2_FS - default n - help - RUBINMIPS and DYNRUBIN compressors. Say 'N' if unsure. - -choice - prompt "JFFS2 default compression mode" if JFFS2_COMPRESSION_OPTIONS - default JFFS2_CMODE_PRIORITY - depends on JFFS2_FS - help - You can set here the default compression mode of JFFS2 from - the available compression modes. Don't touch if unsure. - -config JFFS2_CMODE_NONE - bool "no compression" - help - Uses no compression. - -config JFFS2_CMODE_PRIORITY - bool "priority" - help - Tries the compressors in a predefined order and chooses the first - successful one. - -config JFFS2_CMODE_SIZE - bool "size (EXPERIMENTAL)" - help - Tries all compressors and chooses the one which has the smallest - result. - -config JFFS2_CMODE_FAVOURLZO - bool "Favour LZO" - help - Tries all compressors and chooses the one which has the smallest - result but gives some preference to LZO (which has faster - decompression) at the expense of size. - -endchoice - +source "fs/jffs2/Kconfig" # UBIFS File system configuration source "fs/ubifs/Kconfig" diff --git a/fs/jffs2/Kconfig b/fs/jffs2/Kconfig new file mode 100644 index 00000000000..6ae169cd8fa --- /dev/null +++ b/fs/jffs2/Kconfig @@ -0,0 +1,188 @@ +config JFFS2_FS + tristate "Journalling Flash File System v2 (JFFS2) support" + select CRC32 + depends on MTD + help + JFFS2 is the second generation of the Journalling Flash File System + for use on diskless embedded devices. It provides improved wear + levelling, compression and support for hard links. You cannot use + this on normal block devices, only on 'MTD' devices. + + Further information on the design and implementation of JFFS2 is + available at <http://sources.redhat.com/jffs2/>. + +config JFFS2_FS_DEBUG + int "JFFS2 debugging verbosity (0 = quiet, 2 = noisy)" + depends on JFFS2_FS + default "0" + help + This controls the amount of debugging messages produced by the JFFS2 + code. Set it to zero for use in production systems. For evaluation, + testing and debugging, it's advisable to set it to one. This will + enable a few assertions and will print debugging messages at the + KERN_DEBUG loglevel, where they won't normally be visible. Level 2 + is unlikely to be useful - it enables extra debugging in certain + areas which at one point needed debugging, but when the bugs were + located and fixed, the detailed messages were relegated to level 2. + + If reporting bugs, please try to have available a full dump of the + messages at debug level 1 while the misbehaviour was occurring. + +config JFFS2_FS_WRITEBUFFER + bool "JFFS2 write-buffering support" + depends on JFFS2_FS + default y + help + This enables the write-buffering support in JFFS2. + + This functionality is required to support JFFS2 on the following + types of flash devices: + - NAND flash + - NOR flash with transparent ECC + - DataFlash + +config JFFS2_FS_WBUF_VERIFY + bool "Verify JFFS2 write-buffer reads" + depends on JFFS2_FS_WRITEBUFFER + default n + help + This causes JFFS2 to read back every page written through the + write-buffer, and check for errors. + +config JFFS2_SUMMARY + bool "JFFS2 summary support (EXPERIMENTAL)" + depends on JFFS2_FS && EXPERIMENTAL + default n + help + This feature makes it possible to use summary information + for faster filesystem mount. + + The summary information can be inserted into a filesystem image + by the utility 'sumtool'. + + If unsure, say 'N'. + +config JFFS2_FS_XATTR + bool "JFFS2 XATTR support (EXPERIMENTAL)" + depends on JFFS2_FS && EXPERIMENTAL + default n + help + Extended attributes are name:value pairs associated with inodes by + the kernel or by users (see the attr(5) manual page, or visit + <http://acl.bestbits.at/> for details). + + If unsure, say N. + +config JFFS2_FS_POSIX_ACL + bool "JFFS2 POSIX Access Control Lists" + depends on JFFS2_FS_XATTR + default y + select FS_POSIX_ACL + help + Posix Access Control Lists (ACLs) support permissions for users and + groups beyond the owner/group/world scheme. + + To learn more about Access Control Lists, visit the Posix ACLs for + Linux website <http://acl.bestbits.at/>. + + If you don't know what Access Control Lists are, say N + +config JFFS2_FS_SECURITY + bool "JFFS2 Security Labels" + depends on JFFS2_FS_XATTR + default y + help + Security labels support alternative access control models + implemented by security modules like SELinux. This option + enables an extended attribute handler for file security + labels in the jffs2 filesystem. + + If you are not using a security module that requires using + extended attributes for file security labels, say N. + +config JFFS2_COMPRESSION_OPTIONS + bool "Advanced compression options for JFFS2" + depends on JFFS2_FS + default n + help + Enabling this option allows you to explicitly choose which + compression modules, if any, are enabled in JFFS2. Removing + compressors can mean you cannot read existing file systems, + and enabling experimental compressors can mean that you + write a file system which cannot be read by a standard kernel. + + If unsure, you should _definitely_ say 'N'. + +config JFFS2_ZLIB + bool "JFFS2 ZLIB compression support" if JFFS2_COMPRESSION_OPTIONS + select ZLIB_INFLATE + select ZLIB_DEFLATE + depends on JFFS2_FS + default y + help + Zlib is designed to be a free, general-purpose, legally unencumbered, + lossless data-compression library for use on virtually any computer + hardware and operating system. See <http://www.gzip.org/zlib/> for + further information. + + Say 'Y' if unsure. + +config JFFS2_LZO + bool "JFFS2 LZO compression support" if JFFS2_COMPRESSION_OPTIONS + select LZO_COMPRESS + select LZO_DECOMPRESS + depends on JFFS2_FS + default n + help + minilzo-based compression. Generally works better than Zlib. + + This feature was added in July, 2007. Say 'N' if you need + compatibility with older bootloaders or kernels. + +config JFFS2_RTIME + bool "JFFS2 RTIME compression support" if JFFS2_COMPRESSION_OPTIONS + depends on JFFS2_FS + default y + help + Rtime does manage to recompress already-compressed data. Say 'Y' if unsure. + +config JFFS2_RUBIN + bool "JFFS2 RUBIN compression support" if JFFS2_COMPRESSION_OPTIONS + depends on JFFS2_FS + default n + help + RUBINMIPS and DYNRUBIN compressors. Say 'N' if unsure. + +choice + prompt "JFFS2 default compression mode" if JFFS2_COMPRESSION_OPTIONS + default JFFS2_CMODE_PRIORITY + depends on JFFS2_FS + help + You can set here the default compression mode of JFFS2 from + the available compression modes. Don't touch if unsure. + +config JFFS2_CMODE_NONE + bool "no compression" + help + Uses no compression. + +config JFFS2_CMODE_PRIORITY + bool "priority" + help + Tries the compressors in a predefined order and chooses the first + successful one. + +config JFFS2_CMODE_SIZE + bool "size (EXPERIMENTAL)" + help + Tries all compressors and chooses the one which has the smallest + result. + +config JFFS2_CMODE_FAVOURLZO + bool "Favour LZO" + help + Tries all compressors and chooses the one which has the smallest + result but gives some preference to LZO (which has faster + decompression) at the expense of size. + +endchoice |