diff options
| -rw-r--r-- | drivers/usb/host/ohci-pci.c | 173 |
1 files changed, 110 insertions, 63 deletions
diff --git a/drivers/usb/host/ohci-pci.c b/drivers/usb/host/ohci-pci.c index 596e0b41e60..82fbec305a6 100644 --- a/drivers/usb/host/ohci-pci.c +++ b/drivers/usb/host/ohci-pci.c @@ -20,79 +20,128 @@ /*-------------------------------------------------------------------------*/ -static int -ohci_pci_reset (struct usb_hcd *hcd) +/* AMD 756, for most chips (early revs), corrupts register + * values on read ... so enable the vendor workaround. + */ +static int __devinit ohci_quirk_amd756(struct usb_hcd *hcd) { struct ohci_hcd *ohci = hcd_to_ohci (hcd); - ohci_hcd_init (ohci); - return ohci_init (ohci); + ohci->flags = OHCI_QUIRK_AMD756; + ohci_dbg (ohci, "AMD756 erratum 4 workaround\n"); + + /* also erratum 10 (suspend/resume issues) */ + device_init_wakeup(&hcd->self.root_hub->dev, 0); + + return 0; } -static int __devinit -ohci_pci_start (struct usb_hcd *hcd) +/* Apple's OHCI driver has a lot of bizarre workarounds + * for this chip. Evidently control and bulk lists + * can get confused. (B&W G3 models, and ...) + */ +static int __devinit ohci_quirk_opti(struct usb_hcd *hcd) { struct ohci_hcd *ohci = hcd_to_ohci (hcd); - int ret; - /* REVISIT this whole block should move to reset(), which handles - * all the other one-time init. + ohci_dbg (ohci, "WARNING: OPTi workarounds unavailable\n"); + + return 0; +} + +/* Check for NSC87560. We have to look at the bridge (fn1) to + * identify the USB (fn2). This quirk might apply to more or + * even all NSC stuff. + */ +static int __devinit ohci_quirk_ns(struct usb_hcd *hcd) +{ + struct pci_dev *pdev = to_pci_dev(hcd->self.controller); + struct pci_dev *b; + + b = pci_get_slot (pdev->bus, PCI_DEVFN (PCI_SLOT (pdev->devfn), 1)); + if (b && b->device == PCI_DEVICE_ID_NS_87560_LIO + && b->vendor == PCI_VENDOR_ID_NS) { + struct ohci_hcd *ohci = hcd_to_ohci (hcd); + + ohci->flags |= OHCI_QUIRK_SUPERIO; + ohci_dbg (ohci, "Using NSC SuperIO setup\n"); + } + pci_dev_put(b); + + return 0; +} + +/* Check for Compaq's ZFMicro chipset, which needs short + * delays before control or bulk queues get re-activated + * in finish_unlinks() + */ +static int __devinit ohci_quirk_zfmicro(struct usb_hcd *hcd) +{ + struct ohci_hcd *ohci = hcd_to_ohci (hcd); + + ohci->flags |= OHCI_QUIRK_ZFMICRO; + ohci_dbg (ohci, "enabled Compaq ZFMicro chipset quirk\n"); + + return 0; +} + + +/* List of quirks for OHCI */ +static const struct pci_device_id ohci_pci_quirks[] = { + { + PCI_DEVICE(PCI_VENDOR_ID_AMD, 0x740c), + .driver_data = (unsigned long)ohci_quirk_amd756, + }, + { + PCI_DEVICE(PCI_VENDOR_ID_OPTI, 0xc861), + .driver_data = (unsigned long)ohci_quirk_opti, + }, + { + PCI_DEVICE(PCI_VENDOR_ID_NS, PCI_ANY_ID), + .driver_data = (unsigned long)ohci_quirk_ns, + }, + { + PCI_DEVICE(PCI_VENDOR_ID_COMPAQ, 0xa0f8), + .driver_data = (unsigned long)ohci_quirk_zfmicro, + }, + /* FIXME for some of the early AMD 760 southbridges, OHCI + * won't work at all. blacklist them. */ + {}, +}; + +static int ohci_pci_reset (struct usb_hcd *hcd) +{ + struct ohci_hcd *ohci = hcd_to_ohci (hcd); + int ret = 0; + if (hcd->self.controller) { struct pci_dev *pdev = to_pci_dev(hcd->self.controller); + const struct pci_device_id *quirk_id; - /* AMD 756, for most chips (early revs), corrupts register - * values on read ... so enable the vendor workaround. - */ - if (pdev->vendor == PCI_VENDOR_ID_AMD - && pdev->device == 0x740c) { - ohci->flags = OHCI_QUIRK_AMD756; - ohci_dbg (ohci, "AMD756 erratum 4 workaround\n"); - /* also erratum 10 (suspend/resume issues) */ - device_init_wakeup(&hcd->self.root_hub->dev, 0); + quirk_id = pci_match_id(ohci_pci_quirks, pdev); + if (quirk_id != NULL) { + int (*quirk)(struct usb_hcd *ohci); + quirk = (void *)quirk_id->driver_data; + ret = quirk(hcd); } + } + if (ret == 0) { + ohci_hcd_init (ohci); + return ohci_init (ohci); + } + return ret; +} - /* FIXME for some of the early AMD 760 southbridges, OHCI - * won't work at all. blacklist them. - */ - - /* Apple's OHCI driver has a lot of bizarre workarounds - * for this chip. Evidently control and bulk lists - * can get confused. (B&W G3 models, and ...) - */ - else if (pdev->vendor == PCI_VENDOR_ID_OPTI - && pdev->device == 0xc861) { - ohci_dbg (ohci, - "WARNING: OPTi workarounds unavailable\n"); - } - /* Check for NSC87560. We have to look at the bridge (fn1) to - * identify the USB (fn2). This quirk might apply to more or - * even all NSC stuff. - */ - else if (pdev->vendor == PCI_VENDOR_ID_NS) { - struct pci_dev *b; - - b = pci_get_slot (pdev->bus, - PCI_DEVFN (PCI_SLOT (pdev->devfn), 1)); - if (b && b->device == PCI_DEVICE_ID_NS_87560_LIO - && b->vendor == PCI_VENDOR_ID_NS) { - ohci->flags |= OHCI_QUIRK_SUPERIO; - ohci_dbg (ohci, "Using NSC SuperIO setup\n"); - } - pci_dev_put(b); - } +static int __devinit ohci_pci_start (struct usb_hcd *hcd) +{ + struct ohci_hcd *ohci = hcd_to_ohci (hcd); + int ret; - /* Check for Compaq's ZFMicro chipset, which needs short - * delays before control or bulk queues get re-activated - * in finish_unlinks() - */ - else if (pdev->vendor == PCI_VENDOR_ID_COMPAQ - && pdev->device == 0xa0f8) { - ohci->flags |= OHCI_QUIRK_ZFMICRO; - ohci_dbg (ohci, - "enabled Compaq ZFMicro chipset quirk\n"); - } +#ifdef CONFIG_PM /* avoid warnings about unused pdev */ + if (hcd->self.controller) { + struct pci_dev *pdev = to_pci_dev(hcd->self.controller); /* RWC may not be set for add-in PCI cards, since boot * firmware probably ignored them. This transfers PCI @@ -101,16 +150,14 @@ ohci_pci_start (struct usb_hcd *hcd) if (device_may_wakeup(&pdev->dev)) ohci->hc_control |= OHCI_CTRL_RWC; } +#endif /* CONFIG_PM */ - /* NOTE: there may have already been a first reset, to - * keep bios/smm irqs from making trouble - */ - if ((ret = ohci_run (ohci)) < 0) { + ret = ohci_run (ohci); + if (ret < 0) { ohci_err (ohci, "can't start\n"); ohci_stop (hcd); - return ret; } - return 0; + return ret; } #ifdef CONFIG_PM |