aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--arch/arm/configs/s3c2410_defconfig27
-rw-r--r--arch/arm/mach-s3c2410/mach-bast.c49
-rw-r--r--arch/arm/mach-s3c2410/mach-vr1000.c77
-rw-r--r--arch/arm/nwfpe/softfloat-macros22
-rw-r--r--arch/arm/nwfpe/softfloat.c12
-rw-r--r--drivers/serial/8250.c54
-rw-r--r--drivers/serial/8250.h3
-rw-r--r--drivers/serial/s3c2410.c4
-rw-r--r--drivers/video/pxafb.c3
9 files changed, 214 insertions, 37 deletions
diff --git a/arch/arm/configs/s3c2410_defconfig b/arch/arm/configs/s3c2410_defconfig
index 2a63fb27719..98b72ff3883 100644
--- a/arch/arm/configs/s3c2410_defconfig
+++ b/arch/arm/configs/s3c2410_defconfig
@@ -1,14 +1,13 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc1-bk2
-# Sun Mar 27 17:47:45 2005
+# Linux kernel version: 2.6.12-git4
+# Wed Jun 22 15:56:42 2005
#
CONFIG_ARM=y
CONFIG_MMU=y
CONFIG_UID16=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_IOMAP=y
#
# Code maturity level options
@@ -17,6 +16,7 @@ CONFIG_EXPERIMENTAL=y
# CONFIG_CLEAN_COMPILE is not set
CONFIG_BROKEN=y
CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
@@ -35,6 +35,8 @@ CONFIG_KOBJECT_UEVENT=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
@@ -81,6 +83,7 @@ CONFIG_ARCH_S3C2410=y
# CONFIG_ARCH_VERSATILE is not set
# CONFIG_ARCH_IMX is not set
# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_AAEC2000 is not set
#
# S3C24XX Implementations
@@ -134,6 +137,7 @@ CONFIG_CPU_TLB_V4WBI=y
#
# Bus support
#
+CONFIG_ISA_DMA_API=y
#
# PCCARD (PCMCIA/CardBus) support
@@ -143,7 +147,9 @@ CONFIG_CPU_TLB_V4WBI=y
#
# Kernel Features
#
+# CONFIG_SMP is not set
# CONFIG_PREEMPT is not set
+# CONFIG_DISCONTIGMEM is not set
CONFIG_ALIGNMENT_TRAP=y
#
@@ -297,7 +303,6 @@ CONFIG_PARPORT_1284=y
#
# Block devices
#
-# CONFIG_BLK_DEV_FD is not set
# CONFIG_PARIDE is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
@@ -359,6 +364,7 @@ CONFIG_BLK_DEV_IDE_BAST=y
#
# Fusion MPT device support
#
+# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
@@ -378,10 +384,11 @@ CONFIG_NET=y
# Networking options
#
# CONFIG_PACKET is not set
-# CONFIG_NETLINK_DEV is not set
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_FIB_TRIE is not set
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_PNP=y
@@ -443,8 +450,9 @@ CONFIG_NETDEVICES=y
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
+CONFIG_MII=m
# CONFIG_SMC91X is not set
+CONFIG_DM9000=m
#
# Ethernet (1000 Mbit)
@@ -521,7 +529,6 @@ CONFIG_SERIO_SERPORT=y
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
#
# Character devices
@@ -605,7 +612,6 @@ CONFIG_S3C2410_RTC=y
#
# TPM devices
#
-# CONFIG_TCG_TPM is not set
#
# I2C support
@@ -654,6 +660,7 @@ CONFIG_SENSORS_LM78=m
CONFIG_SENSORS_LM85=m
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
@@ -665,6 +672,7 @@ CONFIG_SENSORS_LM85=m
#
# Other I2C Chip support
#
+# CONFIG_SENSORS_DS1337 is not set
CONFIG_SENSORS_EEPROM=m
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_SENSORS_PCF8591 is not set
@@ -696,8 +704,10 @@ CONFIG_FB=y
# CONFIG_FB_CFB_COPYAREA is not set
# CONFIG_FB_CFB_IMAGEBLIT is not set
# CONFIG_FB_SOFT_CURSOR is not set
+# CONFIG_FB_MACMODES is not set
CONFIG_FB_MODE_HELPERS=y
# CONFIG_FB_TILEBLITTING is not set
+# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_VIRTUAL is not set
#
@@ -782,7 +792,6 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
#
CONFIG_PROC_FS=y
CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
# CONFIG_DEVPTS_FS_XATTR is not set
# CONFIG_TMPFS is not set
# CONFIG_HUGETLBFS is not set
diff --git a/arch/arm/mach-s3c2410/mach-bast.c b/arch/arm/mach-s3c2410/mach-bast.c
index 3bb97eb6e69..f3e970039b6 100644
--- a/arch/arm/mach-s3c2410/mach-bast.c
+++ b/arch/arm/mach-s3c2410/mach-bast.c
@@ -26,6 +26,7 @@
* 03-Mar-2005 BJD Ensured that bast-cpld.h is included
* 10-Mar-2005 LCVR Changed S3C2410_VA to S3C24XX_VA
* 14-Mar-2006 BJD Updated for __iomem changes
+ * 22-Jun-2006 BJD Added DM9000 platform information
*/
#include <linux/kernel.h>
@@ -35,6 +36,7 @@
#include <linux/timer.h>
#include <linux/init.h>
#include <linux/device.h>
+#include <linux/dm9000.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
@@ -53,6 +55,7 @@
#include <asm/arch/regs-serial.h>
#include <asm/arch/regs-gpio.h>
#include <asm/arch/regs-mem.h>
+#include <asm/arch/regs-lcd.h>
#include <asm/arch/nand.h>
#include <linux/mtd/mtd.h>
@@ -112,7 +115,6 @@ static struct map_desc bast_iodesc[] __initdata = {
{ VA_C2(BAST_VA_ISAMEM), PA_CS2(BAST_PA_ISAMEM), SZ_16M, MT_DEVICE },
{ VA_C2(BAST_VA_ASIXNET), PA_CS3(BAST_PA_ASIXNET), SZ_1M, MT_DEVICE },
{ VA_C2(BAST_VA_SUPERIO), PA_CS2(BAST_PA_SUPERIO), SZ_1M, MT_DEVICE },
- { VA_C2(BAST_VA_DM9000), PA_CS2(BAST_PA_DM9000), SZ_1M, MT_DEVICE },
{ VA_C2(BAST_VA_IDEPRI), PA_CS3(BAST_PA_IDEPRI), SZ_1M, MT_DEVICE },
{ VA_C2(BAST_VA_IDESEC), PA_CS3(BAST_PA_IDESEC), SZ_1M, MT_DEVICE },
{ VA_C2(BAST_VA_IDEPRIAUX), PA_CS3(BAST_PA_IDEPRIAUX), SZ_1M, MT_DEVICE },
@@ -123,7 +125,6 @@ static struct map_desc bast_iodesc[] __initdata = {
{ VA_C3(BAST_VA_ISAMEM), PA_CS3(BAST_PA_ISAMEM), SZ_16M, MT_DEVICE },
{ VA_C3(BAST_VA_ASIXNET), PA_CS3(BAST_PA_ASIXNET), SZ_1M, MT_DEVICE },
{ VA_C3(BAST_VA_SUPERIO), PA_CS3(BAST_PA_SUPERIO), SZ_1M, MT_DEVICE },
- { VA_C3(BAST_VA_DM9000), PA_CS3(BAST_PA_DM9000), SZ_1M, MT_DEVICE },
{ VA_C3(BAST_VA_IDEPRI), PA_CS3(BAST_PA_IDEPRI), SZ_1M, MT_DEVICE },
{ VA_C3(BAST_VA_IDESEC), PA_CS3(BAST_PA_IDESEC), SZ_1M, MT_DEVICE },
{ VA_C3(BAST_VA_IDEPRIAUX), PA_CS3(BAST_PA_IDEPRIAUX), SZ_1M, MT_DEVICE },
@@ -134,7 +135,6 @@ static struct map_desc bast_iodesc[] __initdata = {
{ VA_C4(BAST_VA_ISAMEM), PA_CS4(BAST_PA_ISAMEM), SZ_16M, MT_DEVICE },
{ VA_C4(BAST_VA_ASIXNET), PA_CS5(BAST_PA_ASIXNET), SZ_1M, MT_DEVICE },
{ VA_C4(BAST_VA_SUPERIO), PA_CS4(BAST_PA_SUPERIO), SZ_1M, MT_DEVICE },
- { VA_C4(BAST_VA_DM9000), PA_CS4(BAST_PA_DM9000), SZ_1M, MT_DEVICE },
{ VA_C4(BAST_VA_IDEPRI), PA_CS5(BAST_PA_IDEPRI), SZ_1M, MT_DEVICE },
{ VA_C4(BAST_VA_IDESEC), PA_CS5(BAST_PA_IDESEC), SZ_1M, MT_DEVICE },
{ VA_C4(BAST_VA_IDEPRIAUX), PA_CS5(BAST_PA_IDEPRIAUX), SZ_1M, MT_DEVICE },
@@ -145,7 +145,6 @@ static struct map_desc bast_iodesc[] __initdata = {
{ VA_C5(BAST_VA_ISAMEM), PA_CS5(BAST_PA_ISAMEM), SZ_16M, MT_DEVICE },
{ VA_C5(BAST_VA_ASIXNET), PA_CS5(BAST_PA_ASIXNET), SZ_1M, MT_DEVICE },
{ VA_C5(BAST_VA_SUPERIO), PA_CS5(BAST_PA_SUPERIO), SZ_1M, MT_DEVICE },
- { VA_C5(BAST_VA_DM9000), PA_CS5(BAST_PA_DM9000), SZ_1M, MT_DEVICE },
{ VA_C5(BAST_VA_IDEPRI), PA_CS5(BAST_PA_IDEPRI), SZ_1M, MT_DEVICE },
{ VA_C5(BAST_VA_IDESEC), PA_CS5(BAST_PA_IDESEC), SZ_1M, MT_DEVICE },
{ VA_C5(BAST_VA_IDEPRIAUX), PA_CS5(BAST_PA_IDEPRIAUX), SZ_1M, MT_DEVICE },
@@ -313,6 +312,45 @@ static struct s3c2410_platform_nand bast_nand_info = {
.select_chip = bast_nand_select,
};
+/* DM9000 */
+
+static struct resource bast_dm9k_resource[] = {
+ [0] = {
+ .start = S3C2410_CS5 + BAST_PA_DM9000,
+ .end = S3C2410_CS5 + BAST_PA_DM9000 + 3,
+ .flags = IORESOURCE_MEM
+ },
+ [1] = {
+ .start = S3C2410_CS5 + BAST_PA_DM9000 + 0x40,
+ .end = S3C2410_CS5 + BAST_PA_DM9000 + 0x40 + 0x3f,
+ .flags = IORESOURCE_MEM
+ },
+ [2] = {
+ .start = IRQ_DM9000,
+ .end = IRQ_DM9000,
+ .flags = IORESOURCE_IRQ
+ }
+
+};
+
+/* for the moment we limit ourselves to 16bit IO until some
+ * better IO routines can be written and tested
+*/
+
+struct dm9000_plat_data bast_dm9k_platdata = {
+ .flags = DM9000_PLATF_16BITONLY
+};
+
+static struct platform_device bast_device_dm9k = {
+ .name = "dm9000",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(bast_dm9k_resource),
+ .resource = bast_dm9k_resource,
+ .dev = {
+ .platform_data = &bast_dm9k_platdata,
+ }
+};
+
/* Standard BAST devices */
@@ -324,7 +362,8 @@ static struct platform_device *bast_devices[] __initdata = {
&s3c_device_iis,
&s3c_device_rtc,
&s3c_device_nand,
- &bast_device_nor
+ &bast_device_nor,
+ &bast_device_dm9k,
};
static struct clk *bast_clocks[] = {
diff --git a/arch/arm/mach-s3c2410/mach-vr1000.c b/arch/arm/mach-s3c2410/mach-vr1000.c
index 5512146b1ce..76be074944a 100644
--- a/arch/arm/mach-s3c2410/mach-vr1000.c
+++ b/arch/arm/mach-s3c2410/mach-vr1000.c
@@ -27,6 +27,7 @@
* 10-Feb-2005 BJD Added power-off capability
* 10-Mar-2005 LCVR Changed S3C2410_VA to S3C24XX_VA
* 14-Mar-2006 BJD void __iomem fixes
+ * 22-Jun-2006 BJD Added DM9000 platform information
*/
#include <linux/kernel.h>
@@ -35,6 +36,7 @@
#include <linux/list.h>
#include <linux/timer.h>
#include <linux/init.h>
+#include <linux/dm9000.h>
#include <linux/serial.h>
#include <linux/tty.h>
@@ -98,28 +100,24 @@ static struct map_desc vr1000_iodesc[] __initdata = {
* are only 8bit */
/* slow, byte */
- { VA_C2(VR1000_VA_DM9000), PA_CS2(VR1000_PA_DM9000), SZ_1M, MT_DEVICE },
{ VA_C2(VR1000_VA_IDEPRI), PA_CS3(VR1000_PA_IDEPRI), SZ_1M, MT_DEVICE },
{ VA_C2(VR1000_VA_IDESEC), PA_CS3(VR1000_PA_IDESEC), SZ_1M, MT_DEVICE },
{ VA_C2(VR1000_VA_IDEPRIAUX), PA_CS3(VR1000_PA_IDEPRIAUX), SZ_1M, MT_DEVICE },
{ VA_C2(VR1000_VA_IDESECAUX), PA_CS3(VR1000_PA_IDESECAUX), SZ_1M, MT_DEVICE },
/* slow, word */
- { VA_C3(VR1000_VA_DM9000), PA_CS3(VR1000_PA_DM9000), SZ_1M, MT_DEVICE },
{ VA_C3(VR1000_VA_IDEPRI), PA_CS3(VR1000_PA_IDEPRI), SZ_1M, MT_DEVICE },
{ VA_C3(VR1000_VA_IDESEC), PA_CS3(VR1000_PA_IDESEC), SZ_1M, MT_DEVICE },
{ VA_C3(VR1000_VA_IDEPRIAUX), PA_CS3(VR1000_PA_IDEPRIAUX), SZ_1M, MT_DEVICE },
{ VA_C3(VR1000_VA_IDESECAUX), PA_CS3(VR1000_PA_IDESECAUX), SZ_1M, MT_DEVICE },
/* fast, byte */
- { VA_C4(VR1000_VA_DM9000), PA_CS4(VR1000_PA_DM9000), SZ_1M, MT_DEVICE },
{ VA_C4(VR1000_VA_IDEPRI), PA_CS5(VR1000_PA_IDEPRI), SZ_1M, MT_DEVICE },
{ VA_C4(VR1000_VA_IDESEC), PA_CS5(VR1000_PA_IDESEC), SZ_1M, MT_DEVICE },
{ VA_C4(VR1000_VA_IDEPRIAUX), PA_CS5(VR1000_PA_IDEPRIAUX), SZ_1M, MT_DEVICE },
{ VA_C4(VR1000_VA_IDESECAUX), PA_CS5(VR1000_PA_IDESECAUX), SZ_1M, MT_DEVICE },
/* fast, word */
- { VA_C5(VR1000_VA_DM9000), PA_CS5(VR1000_PA_DM9000), SZ_1M, MT_DEVICE },
{ VA_C5(VR1000_VA_IDEPRI), PA_CS5(VR1000_PA_IDEPRI), SZ_1M, MT_DEVICE },
{ VA_C5(VR1000_VA_IDESEC), PA_CS5(VR1000_PA_IDESEC), SZ_1M, MT_DEVICE },
{ VA_C5(VR1000_VA_IDEPRIAUX), PA_CS5(VR1000_PA_IDEPRIAUX), SZ_1M, MT_DEVICE },
@@ -246,6 +244,74 @@ static struct platform_device vr1000_nor = {
.resource = vr1000_nor_resource,
};
+/* DM9000 ethernet devices */
+
+static struct resource vr1000_dm9k0_resource[] = {
+ [0] = {
+ .start = S3C2410_CS5 + VR1000_PA_DM9000,
+ .end = S3C2410_CS5 + VR1000_PA_DM9000 + 3,
+ .flags = IORESOURCE_MEM
+ },
+ [1] = {
+ .start = S3C2410_CS5 + VR1000_PA_DM9000 + 0x40,
+ .end = S3C2410_CS5 + VR1000_PA_DM9000 + 0x7f,
+ .flags = IORESOURCE_MEM
+ },
+ [2] = {
+ .start = IRQ_VR1000_DM9000A,
+ .end = IRQ_VR1000_DM9000A,
+ .flags = IORESOURCE_IRQ
+ }
+
+};
+
+static struct resource vr1000_dm9k1_resource[] = {
+ [0] = {
+ .start = S3C2410_CS5 + VR1000_PA_DM9000 + 0x80,
+ .end = S3C2410_CS5 + VR1000_PA_DM9000 + 0x83,
+ .flags = IORESOURCE_MEM
+ },
+ [1] = {
+ .start = S3C2410_CS5 + VR1000_PA_DM9000 + 0xC0,
+ .end = S3C2410_CS5 + VR1000_PA_DM9000 + 0xFF,
+ .flags = IORESOURCE_MEM
+ },
+ [2] = {
+ .start = IRQ_VR1000_DM9000N,
+ .end = IRQ_VR1000_DM9000N,
+ .flags = IORESOURCE_IRQ
+ }
+};
+
+/* for the moment we limit ourselves to 16bit IO until some
+ * better IO routines can be written and tested
+*/
+
+struct dm9000_plat_data vr1000_dm9k_platdata = {
+ .flags = DM9000_PLATF_16BITONLY,
+};
+
+static struct platform_device vr1000_dm9k0 = {
+ .name = "dm9000",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(vr1000_dm9k0_resource),
+ .resource = vr1000_dm9k0_resource,
+ .dev = {
+ .platform_data = &vr1000_dm9k_platdata,
+ }
+};
+
+static struct platform_device vr1000_dm9k1 = {
+ .name = "dm9000",
+ .id = 1,
+ .num_resources = ARRAY_SIZE(vr1000_dm9k1_resource),
+ .resource = vr1000_dm9k1_resource,
+ .dev = {
+ .platform_data = &vr1000_dm9k_platdata,
+ }
+};
+
+/* devices for this board */
static struct platform_device *vr1000_devices[] __initdata = {
&s3c_device_usb,
@@ -253,8 +319,11 @@ static struct platform_device *vr1000_devices[] __initdata = {
&s3c_device_wdt,
&s3c_device_i2c,
&s3c_device_iis,
+ &s3c_device_adc,
&serial_device,
&vr1000_nor,
+ &vr1000_dm9k0,
+ &vr1000_dm9k1
};
static struct clk *vr1000_clocks[] = {
diff --git a/arch/arm/nwfpe/softfloat-macros b/arch/arm/nwfpe/softfloat-macros
index 5469989f2c5..5a060f95a58 100644
--- a/arch/arm/nwfpe/softfloat-macros
+++ b/arch/arm/nwfpe/softfloat-macros
@@ -563,8 +563,14 @@ static bits64 estimateDiv128To64( bits64 a0, bits64 a1, bits64 b )
bits64 rem0, rem1, term0, term1;
bits64 z;
if ( b <= a0 ) return LIT64( 0xFFFFFFFFFFFFFFFF );
- b0 = b>>32;
- z = ( b0<<32 <= a0 ) ? LIT64( 0xFFFFFFFF00000000 ) : ( a0 / b0 )<<32;
+ b0 = b>>32; /* hence b0 is 32 bits wide now */
+ if ( b0<<32 <= a0 ) {
+ z = LIT64( 0xFFFFFFFF00000000 );
+ } else {
+ z = a0;
+ do_div( z, b0 );
+ z <<= 32;
+ }
mul64To128( b, z, &term0, &term1 );
sub128( a0, a1, term0, term1, &rem0, &rem1 );
while ( ( (sbits64) rem0 ) < 0 ) {
@@ -573,7 +579,12 @@ static bits64 estimateDiv128To64( bits64 a0, bits64 a1, bits64 b )
add128( rem0, rem1, b0, b1, &rem0, &rem1 );
}
rem0 = ( rem0<<32 ) | ( rem1>>32 );
- z |= ( b0<<32 <= rem0 ) ? 0xFFFFFFFF : rem0 / b0;
+ if ( b0<<32 <= rem0 ) {
+ z |= 0xFFFFFFFF;
+ } else {
+ do_div( rem0, b0 );
+ z |= rem0;
+ }
return z;
}
@@ -601,6 +612,7 @@ static bits32 estimateSqrt32( int16 aExp, bits32 a )
};
int8 index;
bits32 z;
+ bits64 A;
index = ( a>>27 ) & 15;
if ( aExp & 1 ) {
@@ -614,7 +626,9 @@ static bits32 estimateSqrt32( int16 aExp, bits32 a )
z = ( 0x20000 <= z ) ? 0xFFFF8000 : ( z<<15 );
if ( z <= a ) return (bits32) ( ( (sbits32) a )>>1 );
}
- return ( (bits32) ( ( ( (bits64) a )<<31 ) / z ) ) + ( z>>1 );
+ A = ( (bits64) a )<<31;
+ do_div( A, z );
+ return ( (bits32) A ) + ( z>>1 );
}
diff --git a/arch/arm/nwfpe/softfloat.c b/arch/arm/nwfpe/softfloat.c
index 9d743ae2906..e038dd3be9b 100644
--- a/arch/arm/nwfpe/softfloat.c
+++ b/arch/arm/nwfpe/softfloat.c
@@ -28,6 +28,8 @@ this code that are retained.
===============================================================================
*/
+#include <asm/div64.h>
+
#include "fpa11.h"
//#include "milieu.h"
//#include "softfloat.h"
@@ -1331,7 +1333,11 @@ float32 float32_div( float32 a, float32 b )
aSig >>= 1;
++zExp;
}
- zSig = ( ( (bits64) aSig )<<32 ) / bSig;
+ {
+ bits64 tmp = ( (bits64) aSig )<<32;
+ do_div( tmp, bSig );
+ zSig = tmp;
+ }
if ( ( zSig & 0x3F ) == 0 ) {
zSig |= ( ( (bits64) bSig ) * zSig != ( (bits64) aSig )<<32 );
}
@@ -1397,7 +1403,9 @@ float32 float32_rem( float32 a, float32 b )
q = ( bSig <= aSig );
if ( q ) aSig -= bSig;
if ( 0 < expDiff ) {
- q = ( ( (bits64) aSig )<<32 ) / bSig;
+ bits64 tmp = ( (bits64) aSig )<<32;
+ do_div( tmp, bSig );
+ q = tmp;
q >>= 32 - expDiff;
bSig >>= 2;
aSig = ( ( aSig>>1 )<<( expDiff - 1 ) ) - bSig * q;
diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c
index 30e8beb7143..79f67fd863e 100644
--- a/drivers/serial/8250.c
+++ b/drivers/serial/8250.c
@@ -132,9 +132,9 @@ struct uart_8250_port {
struct uart_port port;
struct timer_list timer; /* "no irq" timer */
struct list_head list; /* ports on this IRQ */
- unsigned int capabilities; /* port capabilities */
+ unsigned short capabilities; /* port capabilities */
+ unsigned short bugs; /* port bugs */
unsigned int tx_loadsz; /* transmit fifo load size */
- unsigned short rev;
unsigned char acr;
unsigned char ier;
unsigned char lcr;
@@ -560,7 +560,14 @@ static void autoconfig_has_efr(struct uart_8250_port *up)
if (id1 == 0x16 && id2 == 0xC9 &&
(id3 == 0x50 || id3 == 0x52 || id3 == 0x54)) {
up->port.type = PORT_16C950;
- up->rev = rev | (id3 << 8);
+
+ /*
+ * Enable work around for the Oxford Semiconductor 952 rev B
+ * chip which causes it to seriously miscalculate baud rates
+ * when DLL is 0.
+ */
+ if (id3 == 0x52 && rev == 0x01)
+ up->bugs |= UART_BUG_QUOT;
return;
}
@@ -577,8 +584,6 @@ static void autoconfig_has_efr(struct uart_8250_port *up)
id2 = id1 >> 8;
if (id2 == 0x10 || id2 == 0x12 || id2 == 0x14) {
- if (id2 == 0x10)
- up->rev = id1 & 255;
up->port.type = PORT_16850;
return;
}
@@ -809,6 +814,7 @@ static void autoconfig(struct uart_8250_port *up, unsigned int probeflags)
// save_flags(flags); cli();
up->capabilities = 0;
+ up->bugs = 0;
if (!(up->port.flags & UPF_BUGGY_UART)) {
/*
@@ -1021,6 +1027,8 @@ static void serial8250_stop_tx(struct uart_port *port, unsigned int tty_stop)
}
}
+static void transmit_chars(struct uart_8250_port *up);
+
static void serial8250_start_tx(struct uart_port *port, unsigned int tty_start)
{
struct uart_8250_port *up = (struct uart_8250_port *)port;
@@ -1028,6 +1036,14 @@ static void serial8250_start_tx(struct uart_port *port, unsigned int tty_start)
if (!(up->ier & UART_IER_THRI)) {
up->ier |= UART_IER_THRI;
serial_out(up, UART_IER, up->ier);
+
+ if (up->bugs & UART_BUG_TXEN) {
+ unsigned char lsr, iir;
+ lsr = serial_in(up, UART_LSR);
+ iir = serial_in(up, UART_IIR);
+ if (lsr & UART_LSR_TEMT && iir & UART_IIR_NO_INT)
+ transmit_chars(up);
+ }
}
/*
* We only do this from uart_start
@@ -1433,6 +1449,7 @@ static int serial8250_startup(struct uart_port *port)
{
struct uart_8250_port *up = (struct uart_8250_port *)port;
unsigned long flags;
+ unsigned char lsr, iir;
int retval;
up->capabilities = uart_config[up->port.type].flags;
@@ -1536,6 +1553,26 @@ static int serial8250_startup(struct uart_port *port)
up->port.mctrl |= TIOCM_OUT2;
serial8250_set_mctrl(&up->port, up->port.mctrl);
+
+ /*
+ * Do a quick test to see if we receive an
+ * interrupt when we enable the TX irq.
+ */
+ serial_outp(up, UART_IER, UART_IER_THRI);
+ lsr = serial_in(up, UART_LSR);
+ iir = serial_in(up, UART_IIR);
+ serial_outp(up, UART_IER, 0);
+
+ if (lsr & UART_LSR_TEMT && iir & UART_IIR_NO_INT) {
+ if (!(up->bugs & UART_BUG_TXEN)) {
+ up->bugs |= UART_BUG_TXEN;
+ pr_debug("ttyS%d - enabling bad tx status workarounds\n",
+ port->line);
+ }
+ } else {
+ up->bugs &= ~UART_BUG_TXEN;
+ }
+
spin_unlock_irqrestore(&up->port.lock, flags);
/*
@@ -1677,12 +1714,9 @@ serial8250_set_termios(struct uart_port *port, struct termios *termios,
quot = serial8250_get_divisor(port, baud);
/*
- * Work around a bug in the Oxford Semiconductor 952 rev B
- * chip which causes it to seriously miscalculate baud rates
- * when DLL is 0.
+ * Oxford Semi 952 rev B workaround
*/
- if ((quot & 0xff) == 0 && up->port.type == PORT_16C950 &&
- up->rev == 0x5201)
+ if (up->bugs & UART_BUG_QUOT && (quot & 0xff) == 0)
quot ++;
if (up->capabilities & UART_CAP_FIFO && up->port.fifosize > 1) {
diff --git a/drivers/serial/8250.h b/drivers/serial/8250.h
index 4f3d62f222f..9225c82faeb 100644
--- a/drivers/serial/8250.h
+++ b/drivers/serial/8250.h
@@ -51,6 +51,9 @@ struct serial8250_config {
#define UART_CAP_AFE (1 << 11) /* MCR-based hw flow control */
#define UART_CAP_UUE (1 << 12) /* UART needs IER bit 6 set (Xscale) */
+#define UART_BUG_QUOT (1 << 0) /* UART has buggy quot LSB */
+#define UART_BUG_TXEN (1 << 1) /* UART has buggy TX IIR status */
+
#if defined(__i386__) && (defined(CONFIG_M386) || defined(CONFIG_M486))
#define _INLINE_ inline
#else
diff --git a/drivers/serial/s3c2410.c b/drivers/serial/s3c2410.c
index 2a9f7ade2c9..5c4678478b1 100644
--- a/drivers/serial/s3c2410.c
+++ b/drivers/serial/s3c2410.c
@@ -198,7 +198,7 @@ static inline struct s3c24xx_uart_port *to_ourport(struct uart_port *port)
/* translate a port to the device name */
-static inline char *s3c24xx_serial_portname(struct uart_port *port)
+static inline const char *s3c24xx_serial_portname(struct uart_port *port)
{
return to_platform_device(port->dev)->name;
}
@@ -903,7 +903,7 @@ static void s3c24xx_serial_release_port(struct uart_port *port)
static int s3c24xx_serial_request_port(struct uart_port *port)
{
- char *name = s3c24xx_serial_portname(port);
+ const char *name = s3c24xx_serial_portname(port);
return request_mem_region(port->mapbase, MAP_SIZE, name) ? 0 : -EBUSY;
}
diff --git a/drivers/video/pxafb.c b/drivers/video/pxafb.c
index 815fbc8317f..16e37a535d8 100644
--- a/drivers/video/pxafb.c
+++ b/drivers/video/pxafb.c
@@ -43,6 +43,7 @@
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/uaccess.h>
+#include <asm/div64.h>
#include <asm/arch/pxa-regs.h>
#include <asm/arch/bitfield.h>
#include <asm/arch/pxafb.h>
@@ -460,7 +461,7 @@ static inline unsigned int get_pcd(unsigned int pixclock)
* speeds */
pcd = (unsigned long long)get_lcdclk_frequency_10khz() * pixclock;
- pcd /= 100000000 * 2;
+ do_div(pcd, 100000000 * 2);
/* no need for this, since we should subtract 1 anyway. they cancel */
/* pcd += 1; */ /* make up for integer math truncations */
return (unsigned int)pcd;
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-23 08:16:34 +0000