diff options
| -rw-r--r-- | drivers/net/bnx2.c | 52 | ||||
| -rw-r--r-- | drivers/net/bnx2.h | 6 |
2 files changed, 45 insertions, 13 deletions
diff --git a/drivers/net/bnx2.c b/drivers/net/bnx2.c index 635a5856102..015ff790660 100644 --- a/drivers/net/bnx2.c +++ b/drivers/net/bnx2.c @@ -806,7 +806,19 @@ bnx2_setup_serdes_phy(struct bnx2 *bp) bnx2_write_phy(bp, MII_ADVERTISE, new_adv); bnx2_write_phy(bp, MII_BMCR, bmcr | BMCR_ANRESTART | BMCR_ANENABLE); - bp->serdes_an_pending = SERDES_AN_TIMEOUT / bp->timer_interval; + if (CHIP_NUM(bp) == CHIP_NUM_5706) { + /* Speed up link-up time when the link partner + * does not autonegotiate which is very common + * in blade servers. Some blade servers use + * IPMI for kerboard input and it's important + * to minimize link disruptions. Autoneg. involves + * exchanging base pages plus 3 next pages and + * normally completes in about 120 msec. + */ + bp->current_interval = SERDES_AN_TIMEOUT; + bp->serdes_an_pending = 1; + mod_timer(&bp->timer, jiffies + bp->current_interval); + } } return 0; @@ -3800,6 +3812,9 @@ bnx2_timer(unsigned long data) struct bnx2 *bp = (struct bnx2 *) data; u32 msg; + if (!netif_running(bp->dev)) + return; + if (atomic_read(&bp->intr_sem) != 0) goto bnx2_restart_timer; @@ -3817,6 +3832,8 @@ bnx2_timer(unsigned long data) else if ((bp->link_up == 0) && (bp->autoneg & AUTONEG_SPEED)) { u32 bmcr; + bp->current_interval = bp->timer_interval; + bnx2_read_phy(bp, MII_BMCR, &bmcr); if (bmcr & BMCR_ANENABLE) { @@ -3859,14 +3876,14 @@ bnx2_timer(unsigned long data) } } + else + bp->current_interval = bp->timer_interval; spin_unlock_irqrestore(&bp->phy_lock, flags); } bnx2_restart_timer: - bp->timer.expires = RUN_AT(bp->timer_interval); - - add_timer(&bp->timer); + mod_timer(&bp->timer, jiffies + bp->current_interval); } /* Called with rtnl_lock */ @@ -3919,12 +3936,7 @@ bnx2_open(struct net_device *dev) return rc; } - init_timer(&bp->timer); - - bp->timer.expires = RUN_AT(bp->timer_interval); - bp->timer.data = (unsigned long) bp; - bp->timer.function = bnx2_timer; - add_timer(&bp->timer); + mod_timer(&bp->timer, jiffies + bp->current_interval); atomic_set(&bp->intr_sem, 0); @@ -4485,8 +4497,9 @@ bnx2_nway_reset(struct net_device *dev) spin_lock_irq(&bp->phy_lock); if (CHIP_NUM(bp) == CHIP_NUM_5706) { - bp->serdes_an_pending = SERDES_AN_TIMEOUT / - bp->timer_interval; + bp->current_interval = SERDES_AN_TIMEOUT; + bp->serdes_an_pending = 1; + mod_timer(&bp->timer, jiffies + bp->current_interval); } } @@ -5315,6 +5328,7 @@ bnx2_init_board(struct pci_dev *pdev, struct net_device *dev) bp->stats_ticks = 1000000 & 0xffff00; bp->timer_interval = HZ; + bp->current_interval = HZ; /* Disable WOL support if we are running on a SERDES chip. */ if (CHIP_BOND_ID(bp) & CHIP_BOND_ID_SERDES_BIT) { @@ -5338,6 +5352,15 @@ bnx2_init_board(struct pci_dev *pdev, struct net_device *dev) bp->req_line_speed = 0; if (bp->phy_flags & PHY_SERDES_FLAG) { bp->advertising = ETHTOOL_ALL_FIBRE_SPEED | ADVERTISED_Autoneg; + + reg = REG_RD_IND(bp, HOST_VIEW_SHMEM_BASE + + BNX2_PORT_HW_CFG_CONFIG); + reg &= BNX2_PORT_HW_CFG_CFG_DFLT_LINK_MASK; + if (reg == BNX2_PORT_HW_CFG_CFG_DFLT_LINK_1G) { + bp->autoneg = 0; + bp->req_line_speed = bp->line_speed = SPEED_1000; + bp->req_duplex = DUPLEX_FULL; + } } else { bp->advertising = ETHTOOL_ALL_COPPER_SPEED | ADVERTISED_Autoneg; @@ -5345,6 +5368,11 @@ bnx2_init_board(struct pci_dev *pdev, struct net_device *dev) bp->req_flow_ctrl = FLOW_CTRL_RX | FLOW_CTRL_TX; + init_timer(&bp->timer); + bp->timer.expires = RUN_AT(bp->timer_interval); + bp->timer.data = (unsigned long) bp; + bp->timer.function = bnx2_timer; + return 0; err_out_unmap: diff --git a/drivers/net/bnx2.h b/drivers/net/bnx2.h index 63b94ca0018..e1fb099acbf 100644 --- a/drivers/net/bnx2.h +++ b/drivers/net/bnx2.h @@ -3872,6 +3872,7 @@ struct bnx2 { char *name; int timer_interval; + int current_interval; struct timer_list timer; struct work_struct reset_task; int in_reset_task; @@ -3986,7 +3987,7 @@ struct bnx2 { #define PHY_LOOPBACK 2 u8 serdes_an_pending; -#define SERDES_AN_TIMEOUT (2 * HZ) +#define SERDES_AN_TIMEOUT (HZ / 3) u8 mac_addr[8]; @@ -4172,6 +4173,9 @@ struct fw_info { #define BNX2_PORT_HW_CFG_MAC_LOWER 0x00000054 #define BNX2_PORT_HW_CFG_CONFIG 0x00000058 +#define BNX2_PORT_HW_CFG_CFG_DFLT_LINK_MASK 0x001f0000 +#define BNX2_PORT_HW_CFG_CFG_DFLT_LINK_AN 0x00000000 +#define BNX2_PORT_HW_CFG_CFG_DFLT_LINK_1G 0x00030000 #define BNX2_PORT_HW_CFG_IMD_MAC_A_UPPER 0x00000068 #define BNX2_PORT_HW_CFG_IMD_MAC_A_LOWER 0x0000006c |