diff options
-rw-r--r-- | arch/powerpc/kernel/process.c | 7 | ||||
-rw-r--r-- | drivers/acpi/sleep/Makefile | 2 | ||||
-rw-r--r-- | drivers/acpi/sleep/main.c | 46 | ||||
-rw-r--r-- | drivers/ata/pata_sis.c | 3 | ||||
-rw-r--r-- | drivers/ata/sata_sil24.c | 16 | ||||
-rw-r--r-- | drivers/cdrom/cdrom.c | 4 | ||||
-rw-r--r-- | drivers/char/hpet.c | 6 | ||||
-rw-r--r-- | drivers/char/mspec.c | 26 | ||||
-rw-r--r-- | drivers/input/mouse/appletouch.c | 6 | ||||
-rw-r--r-- | drivers/lguest/lguest_asm.S | 6 | ||||
-rw-r--r-- | drivers/net/pcmcia/3c589_cs.c | 2 | ||||
-rw-r--r-- | drivers/net/r8169.c | 14 | ||||
-rw-r--r-- | drivers/net/sky2.c | 37 | ||||
-rw-r--r-- | drivers/net/sky2.h | 2 | ||||
-rw-r--r-- | drivers/scsi/scsi_transport_spi.c | 28 | ||||
-rw-r--r-- | drivers/serial/sunsab.c | 2 | ||||
-rw-r--r-- | drivers/w1/w1.c | 1 | ||||
-rw-r--r-- | fs/compat_ioctl.c | 2 | ||||
-rw-r--r-- | fs/ufs/super.c | 4 | ||||
-rw-r--r-- | include/acpi/acpi_drivers.h | 4 | ||||
-rw-r--r-- | lib/Kconfig.debug | 2 | ||||
-rw-r--r-- | net/ieee80211/softmac/ieee80211softmac_assoc.c | 2 | ||||
-rw-r--r-- | net/ieee80211/softmac/ieee80211softmac_wx.c | 54 |
23 files changed, 156 insertions, 120 deletions
diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c index e477c9d0498..8a1b001d0b1 100644 --- a/arch/powerpc/kernel/process.c +++ b/arch/powerpc/kernel/process.c @@ -605,6 +605,13 @@ void start_thread(struct pt_regs *regs, unsigned long start, unsigned long sp) regs->ccr = 0; regs->gpr[1] = sp; + /* + * We have just cleared all the nonvolatile GPRs, so make + * FULL_REGS(regs) return true. This is necessary to allow + * ptrace to examine the thread immediately after exec. + */ + regs->trap &= ~1UL; + #ifdef CONFIG_PPC32 regs->mq = 0; regs->nip = start; diff --git a/drivers/acpi/sleep/Makefile b/drivers/acpi/sleep/Makefile index ba9bd403d44..f1fb888c2d2 100644 --- a/drivers/acpi/sleep/Makefile +++ b/drivers/acpi/sleep/Makefile @@ -1,5 +1,5 @@ obj-y := wakeup.o -obj-$(CONFIG_ACPI_SLEEP) += main.o +obj-y += main.o obj-$(CONFIG_ACPI_SLEEP) += proc.o EXTRA_CFLAGS += $(ACPI_CFLAGS) diff --git a/drivers/acpi/sleep/main.c b/drivers/acpi/sleep/main.c index 85633c585aa..2cbb9aabd00 100644 --- a/drivers/acpi/sleep/main.c +++ b/drivers/acpi/sleep/main.c @@ -24,7 +24,30 @@ u8 sleep_states[ACPI_S_STATE_COUNT]; +#ifdef CONFIG_PM_SLEEP static u32 acpi_target_sleep_state = ACPI_STATE_S0; +#endif + +int acpi_sleep_prepare(u32 acpi_state) +{ +#ifdef CONFIG_ACPI_SLEEP + /* do we have a wakeup address for S2 and S3? */ + if (acpi_state == ACPI_STATE_S3) { + if (!acpi_wakeup_address) { + return -EFAULT; + } + acpi_set_firmware_waking_vector((acpi_physical_address) + virt_to_phys((void *) + acpi_wakeup_address)); + + } + ACPI_FLUSH_CPU_CACHE(); + acpi_enable_wakeup_device_prep(acpi_state); +#endif + acpi_gpe_sleep_prepare(acpi_state); + acpi_enter_sleep_state_prep(acpi_state); + return 0; +} #ifdef CONFIG_SUSPEND static struct pm_ops acpi_pm_ops; @@ -60,27 +83,6 @@ static int acpi_pm_set_target(suspend_state_t pm_state) return error; } -int acpi_sleep_prepare(u32 acpi_state) -{ -#ifdef CONFIG_ACPI_SLEEP - /* do we have a wakeup address for S2 and S3? */ - if (acpi_state == ACPI_STATE_S3) { - if (!acpi_wakeup_address) { - return -EFAULT; - } - acpi_set_firmware_waking_vector((acpi_physical_address) - virt_to_phys((void *) - acpi_wakeup_address)); - - } - ACPI_FLUSH_CPU_CACHE(); - acpi_enable_wakeup_device_prep(acpi_state); -#endif - acpi_gpe_sleep_prepare(acpi_state); - acpi_enter_sleep_state_prep(acpi_state); - return 0; -} - /** * acpi_pm_prepare - Do preliminary suspend work. * @pm_state: ignored @@ -299,6 +301,7 @@ int acpi_suspend(u32 acpi_state) return -EINVAL; } +#ifdef CONFIG_PM_SLEEP /** * acpi_pm_device_sleep_state - return preferred power state of ACPI device * in the system sleep state given by %acpi_target_sleep_state @@ -373,6 +376,7 @@ int acpi_pm_device_sleep_state(struct device *dev, int wake, int *d_min_p) *d_min_p = d_min; return d_max; } +#endif static void acpi_power_off_prepare(void) { diff --git a/drivers/ata/pata_sis.c b/drivers/ata/pata_sis.c index 2bd7645f1a8..cce2834b2b6 100644 --- a/drivers/ata/pata_sis.c +++ b/drivers/ata/pata_sis.c @@ -375,8 +375,9 @@ static void sis_66_set_dmamode (struct ata_port *ap, struct ata_device *adev) int drive_pci = sis_old_port_base(adev); u16 timing; + /* MWDMA 0-2 and UDMA 0-5 */ const u16 mwdma_bits[] = { 0x008, 0x302, 0x301 }; - const u16 udma_bits[] = { 0xF000, 0xD000, 0xB000, 0xA000, 0x9000}; + const u16 udma_bits[] = { 0xF000, 0xD000, 0xB000, 0xA000, 0x9000, 0x8000 }; pci_read_config_word(pdev, drive_pci, &timing); diff --git a/drivers/ata/sata_sil24.c b/drivers/ata/sata_sil24.c index ef83e6b1e31..233e8869339 100644 --- a/drivers/ata/sata_sil24.c +++ b/drivers/ata/sata_sil24.c @@ -888,6 +888,16 @@ static inline void sil24_host_intr(struct ata_port *ap) u32 slot_stat, qc_active; int rc; + /* If PCIX_IRQ_WOC, there's an inherent race window between + * clearing IRQ pending status and reading PORT_SLOT_STAT + * which may cause spurious interrupts afterwards. This is + * unavoidable and much better than losing interrupts which + * happens if IRQ pending is cleared after reading + * PORT_SLOT_STAT. + */ + if (ap->flags & SIL24_FLAG_PCIX_IRQ_WOC) + writel(PORT_IRQ_COMPLETE, port + PORT_IRQ_STAT); + slot_stat = readl(port + PORT_SLOT_STAT); if (unlikely(slot_stat & HOST_SSTAT_ATTN)) { @@ -895,9 +905,6 @@ static inline void sil24_host_intr(struct ata_port *ap) return; } - if (ap->flags & SIL24_FLAG_PCIX_IRQ_WOC) - writel(PORT_IRQ_COMPLETE, port + PORT_IRQ_STAT); - qc_active = slot_stat & ~HOST_SSTAT_ATTN; rc = ata_qc_complete_multiple(ap, qc_active, sil24_finish_qc); if (rc > 0) @@ -910,7 +917,8 @@ static inline void sil24_host_intr(struct ata_port *ap) return; } - if (ata_ratelimit()) + /* spurious interrupts are expected if PCIX_IRQ_WOC */ + if (!(ap->flags & SIL24_FLAG_PCIX_IRQ_WOC) && ata_ratelimit()) ata_port_printk(ap, KERN_INFO, "spurious interrupt " "(slot_stat 0x%x active_tag %d sactive 0x%x)\n", slot_stat, ap->active_tag, ap->sactive); diff --git a/drivers/cdrom/cdrom.c b/drivers/cdrom/cdrom.c index 67ee3d4b287..79245714f0a 100644 --- a/drivers/cdrom/cdrom.c +++ b/drivers/cdrom/cdrom.c @@ -1032,6 +1032,10 @@ int cdrom_open(struct cdrom_device_info *cdi, struct inode *ip, struct file *fp) check_disk_change(ip->i_bdev); return 0; err_release: + if (CDROM_CAN(CDC_LOCK) && cdi->options & CDO_LOCK) { + cdi->ops->lock_door(cdi, 0); + cdinfo(CD_OPEN, "door unlocked.\n"); + } cdi->ops->release(cdi); err: cdi->use_count--; diff --git a/drivers/char/hpet.c b/drivers/char/hpet.c index 7ecffc9c738..fd51554ab08 100644 --- a/drivers/char/hpet.c +++ b/drivers/char/hpet.c @@ -943,14 +943,14 @@ static acpi_status hpet_resources(struct acpi_resource *res, void *data) printk(KERN_DEBUG "%s: 0x%lx is busy\n", __FUNCTION__, hdp->hd_phys_address); iounmap(hdp->hd_address); - return -EBUSY; + return AE_ALREADY_EXISTS; } } else if (res->type == ACPI_RESOURCE_TYPE_FIXED_MEMORY32) { struct acpi_resource_fixed_memory32 *fixmem32; fixmem32 = &res->data.fixed_memory32; if (!fixmem32) - return -EINVAL; + return AE_NO_MEMORY; hdp->hd_phys_address = fixmem32->address; hdp->hd_address = ioremap(fixmem32->address, @@ -960,7 +960,7 @@ static acpi_status hpet_resources(struct acpi_resource *res, void *data) printk(KERN_DEBUG "%s: 0x%lx is busy\n", __FUNCTION__, hdp->hd_phys_address); iounmap(hdp->hd_address); - return -EBUSY; + return AE_ALREADY_EXISTS; } } else if (res->type == ACPI_RESOURCE_TYPE_EXTENDED_IRQ) { struct acpi_resource_extended_irq *irqp; diff --git a/drivers/char/mspec.c b/drivers/char/mspec.c index 049a46cc9f8..04ac155d3a0 100644 --- a/drivers/char/mspec.c +++ b/drivers/char/mspec.c @@ -155,23 +155,22 @@ mspec_open(struct vm_area_struct *vma) * mspec_close * * Called when unmapping a device mapping. Frees all mspec pages - * belonging to the vma. + * belonging to all the vma's sharing this vma_data structure. */ static void mspec_close(struct vm_area_struct *vma) { struct vma_data *vdata; - int index, last_index, result; + int index, last_index; unsigned long my_page; vdata = vma->vm_private_data; - BUG_ON(vma->vm_start < vdata->vm_start || vma->vm_end > vdata->vm_end); + if (!atomic_dec_and_test(&vdata->refcnt)) + return; - spin_lock(&vdata->lock); - index = (vma->vm_start - vdata->vm_start) >> PAGE_SHIFT; - last_index = (vma->vm_end - vdata->vm_start) >> PAGE_SHIFT; - for (; index < last_index; index++) { + last_index = (vdata->vm_end - vdata->vm_start) >> PAGE_SHIFT; + for (index = 0; index < last_index; index++) { if (vdata->maddr[index] == 0) continue; /* @@ -180,20 +179,12 @@ mspec_close(struct vm_area_struct *vma) */ my_page = vdata->maddr[index]; vdata->maddr[index] = 0; - spin_unlock(&vdata->lock); - result = mspec_zero_block(my_page, PAGE_SIZE); - if (!result) + if (!mspec_zero_block(my_page, PAGE_SIZE)) uncached_free_page(my_page); else printk(KERN_WARNING "mspec_close(): " - "failed to zero page %i\n", - result); - spin_lock(&vdata->lock); + "failed to zero page %ld\n", my_page); } - spin_unlock(&vdata->lock); - - if (!atomic_dec_and_test(&vdata->refcnt)) - return; if (vdata->flags & VMD_VMALLOCED) vfree(vdata); @@ -201,7 +192,6 @@ mspec_close(struct vm_area_struct *vma) kfree(vdata); } - /* * mspec_nopfn * diff --git a/drivers/input/mouse/appletouch.c b/drivers/input/mouse/appletouch.c index 2bea1b2c631..a1804bfdbb8 100644 --- a/drivers/input/mouse/appletouch.c +++ b/drivers/input/mouse/appletouch.c @@ -328,6 +328,7 @@ static void atp_complete(struct urb* urb) { int x, y, x_z, y_z, x_f, y_f; int retval, i, j; + int key; struct atp *dev = urb->context; switch (urb->status) { @@ -468,6 +469,7 @@ static void atp_complete(struct urb* urb) ATP_XFACT, &x_z, &x_f); y = atp_calculate_abs(dev->xy_acc + ATP_XSENSORS, ATP_YSENSORS, ATP_YFACT, &y_z, &y_f); + key = dev->data[dev->datalen - 1] & 1; if (x && y) { if (dev->x_old != -1) { @@ -505,7 +507,7 @@ static void atp_complete(struct urb* urb) the first touch unless reinitialised. Do so if it's been idle for a while in order to avoid waking the kernel up several hundred times a second */ - if (atp_is_geyser_3(dev)) { + if (!key && atp_is_geyser_3(dev)) { dev->idlecount++; if (dev->idlecount == 10) { dev->valid = 0; @@ -514,7 +516,7 @@ static void atp_complete(struct urb* urb) } } - input_report_key(dev->input, BTN_LEFT, dev->data[dev->datalen - 1] & 1); + input_report_key(dev->input, BTN_LEFT, key); input_sync(dev->input); exit: diff --git a/drivers/lguest/lguest_asm.S b/drivers/lguest/lguest_asm.S index f182c6a3620..1ddcd5cd20f 100644 --- a/drivers/lguest/lguest_asm.S +++ b/drivers/lguest/lguest_asm.S @@ -22,8 +22,9 @@ jmp lguest_init /*G:055 We create a macro which puts the assembler code between lgstart_ and - * lgend_ markers. These templates end up in the .init.text section, so they - * are discarded after boot. */ + * lgend_ markers. These templates are put in the .text section: they can't be + * discarded after boot as we may need to patch modules, too. */ +.text #define LGUEST_PATCH(name, insns...) \ lgstart_##name: insns; lgend_##name:; \ .globl lgstart_##name; .globl lgend_##name @@ -34,7 +35,6 @@ LGUEST_PATCH(popf, movl %eax, lguest_data+LGUEST_DATA_irq_enabled) LGUEST_PATCH(pushf, movl lguest_data+LGUEST_DATA_irq_enabled, %eax) /*:*/ -.text /* These demark the EIP range where host should never deliver interrupts. */ .global lguest_noirq_start .global lguest_noirq_end diff --git a/drivers/net/pcmcia/3c589_cs.c b/drivers/net/pcmcia/3c589_cs.c index c06cae3f0b5..503f2685fb7 100644 --- a/drivers/net/pcmcia/3c589_cs.c +++ b/drivers/net/pcmcia/3c589_cs.c @@ -116,7 +116,7 @@ struct el3_private { spinlock_t lock; }; -static const char *if_names[] = { "auto", "10base2", "10baseT", "AUI" }; +static const char *if_names[] = { "auto", "10baseT", "10base2", "AUI" }; /*====================================================================*/ diff --git a/drivers/net/r8169.c b/drivers/net/r8169.c index b85ab4a8f2a..c921ec32c23 100644 --- a/drivers/net/r8169.c +++ b/drivers/net/r8169.c @@ -1228,7 +1228,10 @@ static void rtl8169_hw_phy_config(struct net_device *dev) return; } - /* phy config for RTL8169s mac_version C chip */ + if ((tp->mac_version != RTL_GIGA_MAC_VER_02) && + (tp->mac_version != RTL_GIGA_MAC_VER_03)) + return; + mdio_write(ioaddr, 31, 0x0001); //w 31 2 0 1 mdio_write(ioaddr, 21, 0x1000); //w 21 15 0 1000 mdio_write(ioaddr, 24, 0x65c7); //w 24 15 0 65c7 @@ -2567,6 +2570,15 @@ static void rtl8169_tx_interrupt(struct net_device *dev, (TX_BUFFS_AVAIL(tp) >= MAX_SKB_FRAGS)) { netif_wake_queue(dev); } + /* + * 8168 hack: TxPoll requests are lost when the Tx packets are + * too close. Let's kick an extra TxPoll request when a burst + * of start_xmit activity is detected (if it is not detected, + * it is slow enough). -- FR + */ + smp_rmb(); + if (tp->cur_tx != dirty_tx) + RTL_W8(TxPoll, NPQ); } } diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c index eaffe551d1d..0792031a5cf 100644 --- a/drivers/net/sky2.c +++ b/drivers/net/sky2.c @@ -338,6 +338,16 @@ static void sky2_phy_init(struct sky2_hw *hw, unsigned port) if (!(hw->flags & SKY2_HW_GIGABIT)) { /* enable automatic crossover */ ctrl |= PHY_M_PC_MDI_XMODE(PHY_M_PC_ENA_AUTO) >> 1; + + if (hw->chip_id == CHIP_ID_YUKON_FE_P && + hw->chip_rev == CHIP_REV_YU_FE2_A0) { + u16 spec; + + /* Enable Class A driver for FE+ A0 */ + spec = gm_phy_read(hw, port, PHY_MARV_FE_SPEC_2); + spec |= PHY_M_FESC_SEL_CL_A; + gm_phy_write(hw, port, PHY_MARV_FE_SPEC_2, spec); + } } else { /* disable energy detect */ ctrl &= ~PHY_M_PC_EN_DET_MSK; @@ -816,7 +826,8 @@ static void sky2_mac_init(struct sky2_hw *hw, unsigned port) sky2_write8(hw, SK_REG(port, TX_GMF_CTRL_T), GMF_RST_CLR); sky2_write16(hw, SK_REG(port, TX_GMF_CTRL_T), GMF_OPER_ON); - if (!(hw->flags & SKY2_HW_RAMBUFFER)) { + /* On chips without ram buffer, pause is controled by MAC level */ + if (sky2_read8(hw, B2_E_0) == 0) { sky2_write8(hw, SK_REG(port, RX_GMF_LP_THR), 768/8); sky2_write8(hw, SK_REG(port, RX_GMF_UP_THR), 1024/8); @@ -1271,7 +1282,7 @@ static int sky2_up(struct net_device *dev) struct sky2_port *sky2 = netdev_priv(dev); struct sky2_hw *hw = sky2->hw; unsigned port = sky2->port; - u32 imask; + u32 imask, ramsize; int cap, err = -ENOMEM; struct net_device *otherdev = hw->dev[sky2->port^1]; @@ -1326,13 +1337,12 @@ static int sky2_up(struct net_device *dev) sky2_mac_init(hw, port); - if (hw->flags & SKY2_HW_RAMBUFFER) { - /* Register is number of 4K blocks on internal RAM buffer. */ - u32 ramsize = sky2_read8(hw, B2_E_0) * 4; + /* Register is number of 4K blocks on internal RAM buffer. */ + ramsize = sky2_read8(hw, B2_E_0) * 4; + if (ramsize > 0) { u32 rxspace; - printk(KERN_DEBUG PFX "%s: ram buffer %dK\n", dev->name, ramsize); - + pr_debug(PFX "%s: ram buffer %dK\n", dev->name, ramsize); if (ramsize < 16) rxspace = ramsize / 2; else @@ -1995,7 +2005,7 @@ static int sky2_change_mtu(struct net_device *dev, int new_mtu) synchronize_irq(hw->pdev->irq); - if (!(hw->flags & SKY2_HW_RAMBUFFER)) + if (sky2_read8(hw, B2_E_0) == 0) sky2_set_tx_stfwd(hw, port); ctl = gma_read16(hw, port, GM_GP_CTRL); @@ -2526,7 +2536,7 @@ static void sky2_watchdog(unsigned long arg) ++active; /* For chips with Rx FIFO, check if stuck */ - if ((hw->flags & SKY2_HW_RAMBUFFER) && + if ((hw->flags & SKY2_HW_FIFO_HANG_CHECK) && sky2_rx_hung(dev)) { pr_info(PFX "%s: receiver hang detected\n", dev->name); @@ -2684,8 +2694,10 @@ static int __devinit sky2_init(struct sky2_hw *hw) switch(hw->chip_id) { case CHIP_ID_YUKON_XL: hw->flags = SKY2_HW_GIGABIT - | SKY2_HW_NEWER_PHY - | SKY2_HW_RAMBUFFER; + | SKY2_HW_NEWER_PHY; + if (hw->chip_rev < 3) + hw->flags |= SKY2_HW_FIFO_HANG_CHECK; + break; case CHIP_ID_YUKON_EC_U: @@ -2711,11 +2723,10 @@ static int __devinit sky2_init(struct sky2_hw *hw) dev_err(&hw->pdev->dev, "unsupported revision Yukon-EC rev A1\n"); return -EOPNOTSUPP; } - hw->flags = SKY2_HW_GIGABIT | SKY2_HW_RAMBUFFER; + hw->flags = SKY2_HW_GIGABIT | SKY2_HW_FIFO_HANG_CHECK; break; case CHIP_ID_YUKON_FE: - hw->flags = SKY2_HW_RAMBUFFER; break; case CHIP_ID_YUKON_FE_P: diff --git a/drivers/net/sky2.h b/drivers/net/sky2.h index 69cd98400fe..8bc5c54e3ef 100644 --- a/drivers/net/sky2.h +++ b/drivers/net/sky2.h @@ -2063,7 +2063,7 @@ struct sky2_hw { #define SKY2_HW_FIBRE_PHY 0x00000002 #define SKY2_HW_GIGABIT 0x00000004 #define SKY2_HW_NEWER_PHY 0x00000008 -#define SKY2_HW_RAMBUFFER 0x00000010 /* chip has RAM FIFO */ +#define SKY2_HW_FIFO_HANG_CHECK 0x00000010 #define SKY2_HW_NEW_LE 0x00000020 /* new LSOv2 format */ #define SKY2_HW_AUTO_TX_SUM 0x00000040 /* new IP decode for Tx */ #define SKY2_HW_ADV_POWER_CTL 0x00000080 /* additional PHY power regs */ diff --git a/drivers/scsi/scsi_transport_spi.c b/drivers/scsi/scsi_transport_spi.c index 6f56f875063..4df21c92ff1 100644 --- a/drivers/scsi/scsi_transport_spi.c +++ b/drivers/scsi/scsi_transport_spi.c @@ -787,10 +787,12 @@ spi_dv_device_internal(struct scsi_device *sdev, u8 *buffer) struct scsi_target *starget = sdev->sdev_target; struct Scsi_Host *shost = sdev->host; int len = sdev->inquiry_len; + int min_period = spi_min_period(starget); + int max_width = spi_max_width(starget); /* first set us up for narrow async */ DV_SET(offset, 0); DV_SET(width, 0); - + if (spi_dv_device_compare_inquiry(sdev, buffer, buffer, DV_LOOPS) != SPI_COMPARE_SUCCESS) { starget_printk(KERN_ERR, starget, "Domain Validation Initial Inquiry Failed\n"); @@ -798,9 +800,13 @@ spi_dv_device_internal(struct scsi_device *sdev, u8 *buffer) return; } + if (!scsi_device_wide(sdev)) { + spi_max_width(starget) = 0; + max_width = 0; + } + /* test width */ - if (i->f->set_width && spi_max_width(starget) && - scsi_device_wide(sdev)) { + if (i->f->set_width && max_width) { i->f->set_width(starget, 1); if (spi_dv_device_compare_inquiry(sdev, buffer, @@ -809,6 +815,11 @@ spi_dv_device_internal(struct scsi_device *sdev, u8 *buffer) != SPI_COMPARE_SUCCESS) { starget_printk(KERN_ERR, starget, "Wide Transfers Fail\n"); i->f->set_width(starget, 0); + /* Make sure we don't force wide back on by asking + * for a transfer period that requires it */ + max_width = 0; + if (min_period < 10) + min_period = 10; } } @@ -828,7 +839,8 @@ spi_dv_device_internal(struct scsi_device *sdev, u8 *buffer) /* now set up to the maximum */ DV_SET(offset, spi_max_offset(starget)); - DV_SET(period, spi_min_period(starget)); + DV_SET(period, min_period); + /* try QAS requests; this should be harmless to set if the * target supports it */ if (scsi_device_qas(sdev)) { @@ -837,14 +849,14 @@ spi_dv_device_internal(struct scsi_device *sdev, u8 *buffer) DV_SET(qas, 0); } - if (scsi_device_ius(sdev) && spi_min_period(starget) < 9) { + if (scsi_device_ius(sdev) && min_period < 9) { /* This u320 (or u640). Set IU transfers */ DV_SET(iu, 1); /* Then set the optional parameters */ DV_SET(rd_strm, 1); DV_SET(wr_flow, 1); DV_SET(rti, 1); - if (spi_min_period(starget) == 8) + if (min_period == 8) DV_SET(pcomp_en, 1); } else { DV_SET(iu, 0); @@ -862,6 +874,10 @@ spi_dv_device_internal(struct scsi_device *sdev, u8 *buffer) } else { DV_SET(dt, 1); } + /* set width last because it will pull all the other + * parameters down to required values */ + DV_SET(width, max_width); + /* Do the read only INQUIRY tests */ spi_dv_retrain(sdev, buffer, buffer + sdev->inquiry_len, spi_dv_device_compare_inquiry); diff --git a/drivers/serial/sunsab.c b/drivers/serial/sunsab.c index e348ba68405..ff610c23314 100644 --- a/drivers/serial/sunsab.c +++ b/drivers/serial/sunsab.c @@ -38,7 +38,7 @@ #include <asm/prom.h> #include <asm/of_device.h> -#if defined(CONFIG_SERIAL_SUNZILOG_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) +#if defined(CONFIG_SERIAL_SUNSAB_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) #define SUPPORT_SYSRQ #endif diff --git a/drivers/w1/w1.c b/drivers/w1/w1.c index 8d7ab74170d..a593f900eff 100644 --- a/drivers/w1/w1.c +++ b/drivers/w1/w1.c @@ -431,6 +431,7 @@ static int w1_uevent(struct device *dev, char **envp, int num_envp, err = add_uevent_var(envp, num_envp, &cur_index, buffer, buffer_size, &cur_len, "W1_SLAVE_ID=%024LX", (unsigned long long)sl->reg_num.id); + envp[cur_index] = NULL; if (err) return err; diff --git a/fs/compat_ioctl.c b/fs/compat_ioctl.c index 5a5b7116cef..37310b0e810 100644 --- a/fs/compat_ioctl.c +++ b/fs/compat_ioctl.c @@ -3190,6 +3190,8 @@ COMPATIBLE_IOCTL(SIOCSIWRETRY) COMPATIBLE_IOCTL(SIOCGIWRETRY) COMPATIBLE_IOCTL(SIOCSIWPOWER) COMPATIBLE_IOCTL(SIOCGIWPOWER) +COMPATIBLE_IOCTL(SIOCSIWAUTH) +COMPATIBLE_IOCTL(SIOCGIWAUTH) /* hiddev */ COMPATIBLE_IOCTL(HIDIOCGVERSION) COMPATIBLE_IOCTL(HIDIOCAPPLICATION) diff --git a/fs/ufs/super.c b/fs/ufs/super.c index 73402c5eeb8..38eb0b7a1f3 100644 --- a/fs/ufs/super.c +++ b/fs/ufs/super.c @@ -894,7 +894,7 @@ magic_found: goto again; } - + sbi->s_flags = flags;/*after that line some functions use s_flags*/ ufs_print_super_stuff(sb, usb1, usb2, usb3); /* @@ -1025,8 +1025,6 @@ magic_found: UFS_MOUNT_UFSTYPE_44BSD) uspi->s_maxsymlinklen = fs32_to_cpu(sb, usb3->fs_un2.fs_44.fs_maxsymlinklen); - - sbi->s_flags = flags; inode = iget(sb, UFS_ROOTINO); if (!inode || is_bad_inode(inode)) diff --git a/include/acpi/acpi_drivers.h b/include/acpi/acpi_drivers.h index 202acb9ff4d..f85f77a538a 100644 --- a/include/acpi/acpi_drivers.h +++ b/include/acpi/acpi_drivers.h @@ -147,10 +147,6 @@ static inline void unregister_hotplug_dock_device(acpi_handle handle) /*-------------------------------------------------------------------------- Suspend/Resume -------------------------------------------------------------------------- */ -#ifdef CONFIG_ACPI_SLEEP extern int acpi_sleep_init(void); -#else -static inline int acpi_sleep_init(void) { return 0; } -#endif #endif /*__ACPI_DRIVERS_H__*/ diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug index 50a94eee4d9..495863a500c 100644 --- a/lib/Kconfig.debug +++ b/lib/Kconfig.debug @@ -284,7 +284,7 @@ config LOCKDEP select KALLSYMS_ALL config LOCK_STAT - bool "Lock usage statisitics" + bool "Lock usage statistics" depends on DEBUG_KERNEL && TRACE_IRQFLAGS_SUPPORT && STACKTRACE_SUPPORT && LOCKDEP_SUPPORT select LOCKDEP select DEBUG_SPINLOCK diff --git a/net/ieee80211/softmac/ieee80211softmac_assoc.c b/net/ieee80211/softmac/ieee80211softmac_assoc.c index afb6c6698b2..e475f2e1be1 100644 --- a/net/ieee80211/softmac/ieee80211softmac_assoc.c +++ b/net/ieee80211/softmac/ieee80211softmac_assoc.c @@ -273,8 +273,6 @@ ieee80211softmac_assoc_work(struct work_struct *work) ieee80211softmac_notify(mac->dev, IEEE80211SOFTMAC_EVENT_SCAN_FINISHED, ieee80211softmac_assoc_notify_scan, NULL); if (ieee80211softmac_start_scan(mac)) { dprintk(KERN_INFO PFX "Associate: failed to initiate scan. Is device up?\n"); - mac->associnfo.associating = 0; - mac->associnfo.associated = 0; } goto out; } else { diff --git a/net/ieee80211/softmac/ieee80211softmac_wx.c b/net/ieee80211/softmac/ieee80211softmac_wx.c index d054e9224b3..442b9875f3f 100644 --- a/net/ieee80211/softmac/ieee80211softmac_wx.c +++ b/net/ieee80211/softmac/ieee80211softmac_wx.c @@ -70,44 +70,30 @@ ieee80211softmac_wx_set_essid(struct net_device *net_dev, char *extra) { struct ieee80211softmac_device *sm = ieee80211_priv(net_dev); - struct ieee80211softmac_network *n; struct ieee80211softmac_auth_queue_item *authptr; int length = 0; check_assoc_again: mutex_lock(&sm->associnfo.mutex); - /* Check if we're already associating to this or another network - * If it's another network, cancel and start over with our new network - * If it's our network, ignore the change, we're already doing it! - */ if((sm->associnfo.associating || sm->associnfo.associated) && (data->essid.flags && data->essid.length)) { - /* Get the associating network */ - n = ieee80211softmac_get_network_by_bssid(sm, sm->associnfo.bssid); - if(n && n->essid.len == data->essid.length && - !memcmp(n->essid.data, extra, n->essid.len)) { - dprintk(KERN_INFO PFX "Already associating or associated to "MAC_FMT"\n", - MAC_ARG(sm->associnfo.bssid)); - goto out; - } else { - dprintk(KERN_INFO PFX "Canceling existing associate request!\n"); - /* Cancel assoc work */ - cancel_delayed_work(&sm->associnfo.work); - /* We don't have to do this, but it's a little cleaner */ - list_for_each_entry(authptr, &sm->auth_queue, list) - cancel_delayed_work(&authptr->work); - sm->associnfo.bssvalid = 0; - sm->associnfo.bssfixed = 0; - sm->associnfo.associating = 0; - sm->associnfo.associated = 0; - /* We must unlock to avoid deadlocks with the assoc workqueue - * on the associnfo.mutex */ - mutex_unlock(&sm->associnfo.mutex); - flush_scheduled_work(); - /* Avoid race! Check assoc status again. Maybe someone started an - * association while we flushed. */ - goto check_assoc_again; - } + dprintk(KERN_INFO PFX "Canceling existing associate request!\n"); + /* Cancel assoc work */ + cancel_delayed_work(&sm->associnfo.work); + /* We don't have to do this, but it's a little cleaner */ + list_for_each_entry(authptr, &sm->auth_queue, list) + cancel_delayed_work(&authptr->work); + sm->associnfo.bssvalid = 0; + sm->associnfo.bssfixed = 0; + sm->associnfo.associating = 0; + sm->associnfo.associated = 0; + /* We must unlock to avoid deadlocks with the assoc workqueue + * on the associnfo.mutex */ + mutex_unlock(&sm->associnfo.mutex); + flush_scheduled_work(); + /* Avoid race! Check assoc status again. Maybe someone started an + * association while we flushed. */ + goto check_assoc_again; } sm->associnfo.static_essid = 0; @@ -153,13 +139,13 @@ ieee80211softmac_wx_get_essid(struct net_device *net_dev, data->essid.length = sm->associnfo.req_essid.len; data->essid.flags = 1; /* active */ memcpy(extra, sm->associnfo.req_essid.data, sm->associnfo.req_essid.len); - } - + dprintk(KERN_INFO PFX "Getting essid from req_essid\n"); + } else if (sm->associnfo.associated || sm->associnfo.associating) { /* If we're associating/associated, return that */ - if (sm->associnfo.associated || sm->associnfo.associating) { data->essid.length = sm->associnfo.associate_essid.len; data->essid.flags = 1; /* active */ memcpy(extra, sm->associnfo.associate_essid.data, sm->associnfo.associate_essid.len); + dprintk(KERN_INFO PFX "Getting essid from associate_essid\n"); } mutex_unlock(&sm->associnfo.mutex); |