aboutsummaryrefslogtreecommitdiff
path: root/Documentation
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation')
-rw-r--r--Documentation/ABI/testing/sysfs-bus-pci7
-rw-r--r--Documentation/ABI/testing/sysfs-class-mtd125
-rw-r--r--Documentation/PCI/pcieaer-howto.txt25
-rw-r--r--Documentation/filesystems/00-INDEX4
-rw-r--r--Documentation/filesystems/Locking43
-rw-r--r--Documentation/isdn/00-INDEX19
-rw-r--r--Documentation/kernel-parameters.txt51
-rw-r--r--Documentation/laptops/thinkpad-acpi.txt47
-rw-r--r--Documentation/rfkill.txt2
-rw-r--r--Documentation/video4linux/CARDLIST.cx886
-rw-r--r--Documentation/video4linux/CARDLIST.em28xx1
-rw-r--r--Documentation/video4linux/v4l2-framework.txt24
-rw-r--r--Documentation/watchdog/hpwdt.txt19
13 files changed, 309 insertions, 64 deletions
diff --git a/Documentation/ABI/testing/sysfs-bus-pci b/Documentation/ABI/testing/sysfs-bus-pci
index 97ad190e13a..6bf68053e4b 100644
--- a/Documentation/ABI/testing/sysfs-bus-pci
+++ b/Documentation/ABI/testing/sysfs-bus-pci
@@ -122,3 +122,10 @@ Description:
This symbolic link appears when a device is a Virtual Function.
The symbolic link points to the PCI device sysfs entry of the
Physical Function this device associates with.
+
+What: /sys/bus/pci/slots/.../module
+Date: June 2009
+Contact: linux-pci@vger.kernel.org
+Description:
+ This symbolic link points to the PCI hotplug controller driver
+ module that manages the hotplug slot.
diff --git a/Documentation/ABI/testing/sysfs-class-mtd b/Documentation/ABI/testing/sysfs-class-mtd
new file mode 100644
index 00000000000..4d55a188898
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-class-mtd
@@ -0,0 +1,125 @@
+What: /sys/class/mtd/
+Date: April 2009
+KernelVersion: 2.6.29
+Contact: linux-mtd@lists.infradead.org
+Description:
+ The mtd/ class subdirectory belongs to the MTD subsystem
+ (MTD core).
+
+What: /sys/class/mtd/mtdX/
+Date: April 2009
+KernelVersion: 2.6.29
+Contact: linux-mtd@lists.infradead.org
+Description:
+ The /sys/class/mtd/mtd{0,1,2,3,...} directories correspond
+ to each /dev/mtdX character device. These may represent
+ physical/simulated flash devices, partitions on a flash
+ device, or concatenated flash devices. They exist regardless
+ of whether CONFIG_MTD_CHAR is actually enabled.
+
+What: /sys/class/mtd/mtdXro/
+Date: April 2009
+KernelVersion: 2.6.29
+Contact: linux-mtd@lists.infradead.org
+Description:
+ These directories provide the corresponding read-only device
+ nodes for /sys/class/mtd/mtdX/ . They are only created
+ (for the benefit of udev) if CONFIG_MTD_CHAR is enabled.
+
+What: /sys/class/mtd/mtdX/dev
+Date: April 2009
+KernelVersion: 2.6.29
+Contact: linux-mtd@lists.infradead.org
+Description:
+ Major and minor numbers of the character device corresponding
+ to this MTD device (in <major>:<minor> format). This is the
+ read-write device so <minor> will be even.
+
+What: /sys/class/mtd/mtdXro/dev
+Date: April 2009
+KernelVersion: 2.6.29
+Contact: linux-mtd@lists.infradead.org
+Description:
+ Major and minor numbers of the character device corresponding
+ to the read-only variant of thie MTD device (in
+ <major>:<minor> format). In this case <minor> will be odd.
+
+What: /sys/class/mtd/mtdX/erasesize
+Date: April 2009
+KernelVersion: 2.6.29
+Contact: linux-mtd@lists.infradead.org
+Description:
+ "Major" erase size for the device. If numeraseregions is
+ zero, this is the eraseblock size for the entire device.
+ Otherwise, the MEMGETREGIONCOUNT/MEMGETREGIONINFO ioctls
+ can be used to determine the actual eraseblock layout.
+
+What: /sys/class/mtd/mtdX/flags
+Date: April 2009
+KernelVersion: 2.6.29
+Contact: linux-mtd@lists.infradead.org
+Description:
+ A hexadecimal value representing the device flags, ORed
+ together:
+
+ 0x0400: MTD_WRITEABLE - device is writable
+ 0x0800: MTD_BIT_WRITEABLE - single bits can be flipped
+ 0x1000: MTD_NO_ERASE - no erase necessary
+ 0x2000: MTD_POWERUP_LOCK - always locked after reset
+
+What: /sys/class/mtd/mtdX/name
+Date: April 2009
+KernelVersion: 2.6.29
+Contact: linux-mtd@lists.infradead.org
+Description:
+ A human-readable ASCII name for the device or partition.
+ This will match the name in /proc/mtd .
+
+What: /sys/class/mtd/mtdX/numeraseregions
+Date: April 2009
+KernelVersion: 2.6.29
+Contact: linux-mtd@lists.infradead.org
+Description:
+ For devices that have variable eraseblock sizes, this
+ provides the total number of erase regions. Otherwise,
+ it will read back as zero.
+
+What: /sys/class/mtd/mtdX/oobsize
+Date: April 2009
+KernelVersion: 2.6.29
+Contact: linux-mtd@lists.infradead.org
+Description:
+ Number of OOB bytes per page.
+
+What: /sys/class/mtd/mtdX/size
+Date: April 2009
+KernelVersion: 2.6.29
+Contact: linux-mtd@lists.infradead.org
+Description:
+ Total size of the device/partition, in bytes.
+
+What: /sys/class/mtd/mtdX/type
+Date: April 2009
+KernelVersion: 2.6.29
+Contact: linux-mtd@lists.infradead.org
+Description:
+ One of the following ASCII strings, representing the device
+ type:
+
+ absent, ram, rom, nor, nand, dataflash, ubi, unknown
+
+What: /sys/class/mtd/mtdX/writesize
+Date: April 2009
+KernelVersion: 2.6.29
+Contact: linux-mtd@lists.infradead.org
+Description:
+ Minimal writable flash unit size. This will always be
+ a positive integer.
+
+ In the case of NOR flash it is 1 (even though individual
+ bits can be cleared).
+
+ In the case of NAND flash it is one NAND page (or a
+ half page, or a quarter page).
+
+ In the case of ECC NOR, it is the ECC block size.
diff --git a/Documentation/PCI/pcieaer-howto.txt b/Documentation/PCI/pcieaer-howto.txt
index ddeb14beacc..be21001ab14 100644
--- a/Documentation/PCI/pcieaer-howto.txt
+++ b/Documentation/PCI/pcieaer-howto.txt
@@ -61,6 +61,10 @@ be initiated although firmwares have no _OSC support. To enable the
walkaround, pls. add aerdriver.forceload=y to kernel boot parameter line
when booting kernel. Note that forceload=n by default.
+nosourceid, another parameter of type bool, can be used when broken
+hardware (mostly chipsets) has root ports that cannot obtain the reporting
+source ID. nosourceid=n by default.
+
2.3 AER error output
When a PCI-E AER error is captured, an error message will be outputed to
console. If it's a correctable error, it is outputed as a warning.
@@ -246,3 +250,24 @@ with the PCI Express AER Root driver?
A: It could call the helper functions to enable AER in devices and
cleanup uncorrectable status register. Pls. refer to section 3.3.
+
+4. Software error injection
+
+Debugging PCIE AER error recovery code is quite difficult because it
+is hard to trigger real hardware errors. Software based error
+injection can be used to fake various kinds of PCIE errors.
+
+First you should enable PCIE AER software error injection in kernel
+configuration, that is, following item should be in your .config.
+
+CONFIG_PCIEAER_INJECT=y or CONFIG_PCIEAER_INJECT=m
+
+After reboot with new kernel or insert the module, a device file named
+/dev/aer_inject should be created.
+
+Then, you need a user space tool named aer-inject, which can be gotten
+from:
+ http://www.kernel.org/pub/linux/utils/pci/aer-inject/
+
+More information about aer-inject can be found in the document comes
+with its source code.
diff --git a/Documentation/filesystems/00-INDEX b/Documentation/filesystems/00-INDEX
index 8dd6db76171..f15621ee559 100644
--- a/Documentation/filesystems/00-INDEX
+++ b/Documentation/filesystems/00-INDEX
@@ -66,6 +66,10 @@ mandatory-locking.txt
- info on the Linux implementation of Sys V mandatory file locking.
ncpfs.txt
- info on Novell Netware(tm) filesystem using NCP protocol.
+nfs41-server.txt
+ - info on the Linux server implementation of NFSv4 minor version 1.
+nfs-rdma.txt
+ - how to install and setup the Linux NFS/RDMA client and server software.
nfsroot.txt
- short guide on setting up a diskless box with NFS root filesystem.
nilfs2.txt
diff --git a/Documentation/filesystems/Locking b/Documentation/filesystems/Locking
index 229d7b7c50a..18b9d0ca063 100644
--- a/Documentation/filesystems/Locking
+++ b/Documentation/filesystems/Locking
@@ -109,27 +109,28 @@ prototypes:
locking rules:
All may block.
- BKL s_lock s_umount
-alloc_inode: no no no
-destroy_inode: no
-dirty_inode: no (must not sleep)
-write_inode: no
-drop_inode: no !!!inode_lock!!!
-delete_inode: no
-put_super: yes yes no
-write_super: no yes read
-sync_fs: no no read
-freeze_fs: ?
-unfreeze_fs: ?
-statfs: no no no
-remount_fs: yes yes maybe (see below)
-clear_inode: no
-umount_begin: yes no no
-show_options: no (vfsmount->sem)
-quota_read: no no no (see below)
-quota_write: no no no (see below)
-
-->remount_fs() will have the s_umount lock if it's already mounted.
+ None have BKL
+ s_umount
+alloc_inode:
+destroy_inode:
+dirty_inode: (must not sleep)
+write_inode:
+drop_inode: !!!inode_lock!!!
+delete_inode:
+put_super: write
+write_super: read
+sync_fs: read
+freeze_fs: read
+unfreeze_fs: read
+statfs: no
+remount_fs: maybe (see below)
+clear_inode:
+umount_begin: no
+show_options: no (namespace_sem)
+quota_read: no (see below)
+quota_write: no (see below)
+
+->remount_fs() will have the s_umount exclusive lock if it's already mounted.
When called from get_sb_single, it does NOT have the s_umount lock.
->quota_read() and ->quota_write() functions are both guaranteed to
be the only ones operating on the quota file by the quota code (via
diff --git a/Documentation/isdn/00-INDEX b/Documentation/isdn/00-INDEX
index f6010a53659..e87e336f590 100644
--- a/Documentation/isdn/00-INDEX
+++ b/Documentation/isdn/00-INDEX
@@ -14,25 +14,14 @@ README
- general info on what you need and what to do for Linux ISDN.
README.FAQ
- general info for FAQ.
-README.audio
- - info for running audio over ISDN.
-README.fax
- - info for using Fax over ISDN.
-README.gigaset
- - info on the drivers for Siemens Gigaset ISDN adapters.
-README.icn
- - info on the ICN-ISDN-card and its driver.
->>>>>>> 93af7aca44f0e82e67bda10a0fb73d383edcc8bd:Documentation/isdn/00-INDEX
README.HiSax
- info on the HiSax driver which replaces the old teles.
+README.act2000
+ - info on driver for IBM ACT-2000 card.
README.audio
- info for running audio over ISDN.
README.avmb1
- info on driver for AVM-B1 ISDN card.
-README.act2000
- - info on driver for IBM ACT-2000 card.
-README.eicon
- - info on driver for Eicon active cards.
README.concap
- info on "CONCAP" encapsulation protocol interface used for X.25.
README.diversion
@@ -59,7 +48,3 @@ README.x25
- info for running X.25 over ISDN.
syncPPP.FAQ
- frequently asked questions about running PPP over ISDN.
-README.hysdn
- - info on driver for Hypercope active HYSDN cards
-README.mISDN
- - info on the Modular ISDN subsystem (mISDN).
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index 08def8deb5f..040fee60728 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -229,14 +229,6 @@ and is between 256 and 4096 characters. It is defined in the file
to assume that this machine's pmtimer latches its value
and always returns good values.
- acpi.power_nocheck= [HW,ACPI]
- Format: 1/0 enable/disable the check of power state.
- On some bogus BIOS the _PSC object/_STA object of
- power resource can't return the correct device power
- state. In such case it is unneccessary to check its
- power state again in power transition.
- 1 : disable the power state check
-
acpi_sci= [HW,ACPI] ACPI System Control Interrupt trigger mode
Format: { level | edge | high | low }
@@ -1006,6 +998,7 @@ and is between 256 and 4096 characters. It is defined in the file
nomerge
forcesac
soft
+ pt [x86, IA64]
io7= [HW] IO7 for Marvel based alpha systems
See comment before marvel_specify_io7 in
@@ -1369,6 +1362,27 @@ and is between 256 and 4096 characters. It is defined in the file
min_addr=nn[KMG] [KNL,BOOT,ia64] All physical memory below this
physical address is ignored.
+ mini2440= [ARM,HW,KNL]
+ Format:[0..2][b][c][t]
+ Default: "0tb"
+ MINI2440 configuration specification:
+ 0 - The attached screen is the 3.5" TFT
+ 1 - The attached screen is the 7" TFT
+ 2 - The VGA Shield is attached (1024x768)
+ Leaving out the screen size parameter will not load
+ the TFT driver, and the framebuffer will be left
+ unconfigured.
+ b - Enable backlight. The TFT backlight pin will be
+ linked to the kernel VESA blanking code and a GPIO
+ LED. This parameter is not necessary when using the
+ VGA shield.
+ c - Enable the s3c camera interface.
+ t - Reserved for enabling touchscreen support. The
+ touchscreen support is not enabled in the mainstream
+ kernel as of 2.6.30, a preliminary port can be found
+ in the "bleeding edge" mini2440 support kernel at
+ http://repo.or.cz/w/linux-2.6/mini2440.git
+
mminit_loglevel=
[KNL] When CONFIG_DEBUG_MEMORY_INIT is set, this
parameter allows control of the logging verbosity for
@@ -1410,6 +1424,16 @@ and is between 256 and 4096 characters. It is defined in the file
mtdparts= [MTD]
See drivers/mtd/cmdlinepart.c.
+ onenand.bdry= [HW,MTD] Flex-OneNAND Boundary Configuration
+
+ Format: [die0_boundary][,die0_lock][,die1_boundary][,die1_lock]
+
+ boundary - index of last SLC block on Flex-OneNAND.
+ The remaining blocks are configured as MLC blocks.
+ lock - Configure if Flex-OneNAND boundary should be locked.
+ Once locked, the boundary cannot be changed.
+ 1 indicates lock status, 0 indicates unlock status.
+
mtdset= [ARM]
ARM/S3C2412 JIVE boot control
@@ -1776,6 +1800,9 @@ and is between 256 and 4096 characters. It is defined in the file
root domains (aka PCI segments, in ACPI-speak).
nommconf [X86] Disable use of MMCONFIG for PCI
Configuration
+ check_enable_amd_mmconf [X86] check for and enable
+ properly configured MMIO access to PCI
+ config space on AMD family 10h CPU
nomsi [MSI] If the PCI_MSI kernel config parameter is
enabled, this kernel boot option can be used to
disable the use of MSI interrupts system-wide.
@@ -1828,7 +1855,7 @@ and is between 256 and 4096 characters. It is defined in the file
IRQ routing is enabled.
noacpi [X86] Do not use ACPI for IRQ routing
or for PCI scanning.
- use_crs [X86] Use _CRS for PCI resource
+ nocrs [X86] Don't use _CRS for PCI resource
allocation.
routeirq Do IRQ routing for all PCI devices.
This is normally done in pci_enable_device(),
@@ -1865,6 +1892,12 @@ and is between 256 and 4096 characters. It is defined in the file
PAGE_SIZE is used as alignment.
PCI-PCI bridge can be specified, if resource
windows need to be expanded.
+ ecrc= Enable/disable PCIe ECRC (transaction layer
+ end-to-end CRC checking).
+ bios: Use BIOS/firmware settings. This is the
+ the default.
+ off: Turn ECRC off
+ on: Turn ECRC on.
pcie_aspm= [PCIE] Forcibly enable or disable PCIe Active State Power
Management.
diff --git a/Documentation/laptops/thinkpad-acpi.txt b/Documentation/laptops/thinkpad-acpi.txt
index 78e354b42f6..f2296ecedb8 100644
--- a/Documentation/laptops/thinkpad-acpi.txt
+++ b/Documentation/laptops/thinkpad-acpi.txt
@@ -920,7 +920,7 @@ The available commands are:
echo '<LED number> off' >/proc/acpi/ibm/led
echo '<LED number> blink' >/proc/acpi/ibm/led
-The <LED number> range is 0 to 7. The set of LEDs that can be
+The <LED number> range is 0 to 15. The set of LEDs that can be
controlled varies from model to model. Here is the common ThinkPad
mapping:
@@ -932,6 +932,11 @@ mapping:
5 - UltraBase battery slot
6 - (unknown)
7 - standby
+ 8 - dock status 1
+ 9 - dock status 2
+ 10, 11 - (unknown)
+ 12 - thinkvantage
+ 13, 14, 15 - (unknown)
All of the above can be turned on and off and can be made to blink.
@@ -940,10 +945,12 @@ sysfs notes:
The ThinkPad LED sysfs interface is described in detail by the LED class
documentation, in Documentation/leds-class.txt.
-The leds are named (in LED ID order, from 0 to 7):
+The LEDs are named (in LED ID order, from 0 to 12):
"tpacpi::power", "tpacpi:orange:batt", "tpacpi:green:batt",
"tpacpi::dock_active", "tpacpi::bay_active", "tpacpi::dock_batt",
-"tpacpi::unknown_led", "tpacpi::standby".
+"tpacpi::unknown_led", "tpacpi::standby", "tpacpi::dock_status1",
+"tpacpi::dock_status2", "tpacpi::unknown_led2", "tpacpi::unknown_led3",
+"tpacpi::thinkvantage".
Due to limitations in the sysfs LED class, if the status of the LED
indicators cannot be read due to an error, thinkpad-acpi will report it as
@@ -958,6 +965,12 @@ ThinkPad indicator LED should blink in hardware accelerated mode, use the
"timer" trigger, and leave the delay_on and delay_off parameters set to
zero (to request hardware acceleration autodetection).
+LEDs that are known not to exist in a given ThinkPad model are not
+made available through the sysfs interface. If you have a dock and you
+notice there are LEDs listed for your ThinkPad that do not exist (and
+are not in the dock), or if you notice that there are missing LEDs,
+a report to ibm-acpi-devel@lists.sourceforge.net is appreciated.
+
ACPI sounds -- /proc/acpi/ibm/beep
----------------------------------
@@ -1156,17 +1169,19 @@ may not be distinct. Later Lenovo models that implement the ACPI
display backlight brightness control methods have 16 levels, ranging
from 0 to 15.
-There are two interfaces to the firmware for direct brightness control,
-EC and UCMS (or CMOS). To select which one should be used, use the
-brightness_mode module parameter: brightness_mode=1 selects EC mode,
-brightness_mode=2 selects UCMS mode, brightness_mode=3 selects EC
-mode with NVRAM backing (so that brightness changes are remembered
-across shutdown/reboot).
+For IBM ThinkPads, there are two interfaces to the firmware for direct
+brightness control, EC and UCMS (or CMOS). To select which one should be
+used, use the brightness_mode module parameter: brightness_mode=1 selects
+EC mode, brightness_mode=2 selects UCMS mode, brightness_mode=3 selects EC
+mode with NVRAM backing (so that brightness changes are remembered across
+shutdown/reboot).
The driver tries to select which interface to use from a table of
defaults for each ThinkPad model. If it makes a wrong choice, please
report this as a bug, so that we can fix it.
+Lenovo ThinkPads only support brightness_mode=2 (UCMS).
+
When display backlight brightness controls are available through the
standard ACPI interface, it is best to use it instead of this direct
ThinkPad-specific interface. The driver will disable its native
@@ -1254,7 +1269,7 @@ Fan control and monitoring: fan speed, fan enable/disable
procfs: /proc/acpi/ibm/fan
sysfs device attributes: (hwmon "thinkpad") fan1_input, pwm1,
- pwm1_enable
+ pwm1_enable, fan2_input
sysfs hwmon driver attributes: fan_watchdog
NOTE NOTE NOTE: fan control operations are disabled by default for
@@ -1267,6 +1282,9 @@ from the hardware registers of the embedded controller. This is known
to work on later R, T, X and Z series ThinkPads but may show a bogus
value on other models.
+Some Lenovo ThinkPads support a secondary fan. This fan cannot be
+controlled separately, it shares the main fan control.
+
Fan levels:
Most ThinkPad fans work in "levels" at the firmware interface. Level 0
@@ -1397,6 +1415,11 @@ hwmon device attribute fan1_input:
which can take up to two minutes. May return rubbish on older
ThinkPads.
+hwmon device attribute fan2_input:
+ Fan tachometer reading, in RPM, for the secondary fan.
+ Available only on some ThinkPads. If the secondary fan is
+ not installed, will always read 0.
+
hwmon driver attribute fan_watchdog:
Fan safety watchdog timer interval, in seconds. Minimum is
1 second, maximum is 120 seconds. 0 disables the watchdog.
@@ -1555,3 +1578,7 @@ Sysfs interface changelog:
0x020300: hotkey enable/disable support removed, attributes
hotkey_bios_enabled and hotkey_enable deprecated and
marked for removal.
+
+0x020400: Marker for 16 LEDs support. Also, LEDs that are known
+ to not exist in a given model are not registered with
+ the LED sysfs class anymore.
diff --git a/Documentation/rfkill.txt b/Documentation/rfkill.txt
index c8acd8659e9..b4860509c31 100644
--- a/Documentation/rfkill.txt
+++ b/Documentation/rfkill.txt
@@ -111,6 +111,8 @@ following attributes:
name: Name assigned by driver to this key (interface or driver name).
type: Driver type string ("wlan", "bluetooth", etc).
+ persistent: Whether the soft blocked state is initialised from
+ non-volatile storage at startup.
state: Current state of the transmitter
0: RFKILL_STATE_SOFT_BLOCKED
transmitter is turned off by software
diff --git a/Documentation/video4linux/CARDLIST.cx88 b/Documentation/video4linux/CARDLIST.cx88
index 89093f53172..0736518b2f8 100644
--- a/Documentation/video4linux/CARDLIST.cx88
+++ b/Documentation/video4linux/CARDLIST.cx88
@@ -6,8 +6,8 @@
5 -> Leadtek Winfast 2000XP Expert [107d:6611,107d:6613]
6 -> AverTV Studio 303 (M126) [1461:000b]
7 -> MSI TV-@nywhere Master [1462:8606]
- 8 -> Leadtek Winfast DV2000 [107d:6620]
- 9 -> Leadtek PVR 2000 [107d:663b,107d:663c,107d:6632]
+ 8 -> Leadtek Winfast DV2000 [107d:6620,107d:6621]
+ 9 -> Leadtek PVR 2000 [107d:663b,107d:663c,107d:6632,107d:6630,107d:6638,107d:6631,107d:6637,107d:663d]
10 -> IODATA GV-VCP3/PCI [10fc:d003]
11 -> Prolink PlayTV PVR
12 -> ASUS PVR-416 [1043:4823,1461:c111]
@@ -59,7 +59,7 @@
58 -> Pinnacle PCTV HD 800i [11bd:0051]
59 -> DViCO FusionHDTV 5 PCI nano [18ac:d530]
60 -> Pinnacle Hybrid PCTV [12ab:1788]
- 61 -> Winfast TV2000 XP Global [107d:6f18]
+ 61 -> Leadtek TV2000 XP Global [107d:6f18,107d:6618]
62 -> PowerColor RA330 [14f1:ea3d]
63 -> Geniatech X8000-MT DVBT [14f1:8852]
64 -> DViCO FusionHDTV DVB-T PRO [18ac:db30]
diff --git a/Documentation/video4linux/CARDLIST.em28xx b/Documentation/video4linux/CARDLIST.em28xx
index a98a688c11b..873630e7e53 100644
--- a/Documentation/video4linux/CARDLIST.em28xx
+++ b/Documentation/video4linux/CARDLIST.em28xx
@@ -65,3 +65,4 @@
67 -> Terratec Grabby (em2860) [0ccd:0096]
68 -> Terratec AV350 (em2860) [0ccd:0084]
69 -> KWorld ATSC 315U HDTV TV Box (em2882) [eb1a:a313]
+ 70 -> Evga inDtube (em2882)
diff --git a/Documentation/video4linux/v4l2-framework.txt b/Documentation/video4linux/v4l2-framework.txt
index d54c1e4c6a9..ba4706afc5f 100644
--- a/Documentation/video4linux/v4l2-framework.txt
+++ b/Documentation/video4linux/v4l2-framework.txt
@@ -390,6 +390,30 @@ later date. It differs between i2c drivers and as such can be confusing.
To see which chip variants are supported you can look in the i2c driver code
for the i2c_device_id table. This lists all the possibilities.
+There are two more helper functions:
+
+v4l2_i2c_new_subdev_cfg: this function adds new irq and platform_data
+arguments and has both 'addr' and 'probed_addrs' arguments: if addr is not
+0 then that will be used (non-probing variant), otherwise the probed_addrs
+are probed.
+
+For example: this will probe for address 0x10:
+
+struct v4l2_subdev *sd = v4l2_i2c_new_subdev_cfg(v4l2_dev, adapter,
+ "module_foo", "chipid", 0, NULL, 0, I2C_ADDRS(0x10));
+
+v4l2_i2c_new_subdev_board uses an i2c_board_info struct which is passed
+to the i2c driver and replaces the irq, platform_data and addr arguments.
+
+If the subdev supports the s_config core ops, then that op is called with
+the irq and platform_data arguments after the subdev was setup. The older
+v4l2_i2c_new_(probed_)subdev functions will call s_config as well, but with
+irq set to 0 and platform_data set to NULL.
+
+Note that in the next kernel release the functions v4l2_i2c_new_subdev,
+v4l2_i2c_new_probed_subdev and v4l2_i2c_new_probed_subdev_addr will all be
+replaced by a single v4l2_i2c_new_subdev that is identical to
+v4l2_i2c_new_subdev_cfg but without the irq and platform_data arguments.
struct video_device
-------------------
diff --git a/Documentation/watchdog/hpwdt.txt b/Documentation/watchdog/hpwdt.txt
index 127839e5304..9c24d5ffbb0 100644
--- a/Documentation/watchdog/hpwdt.txt
+++ b/Documentation/watchdog/hpwdt.txt
@@ -19,30 +19,41 @@ Last reviewed: 06/02/2009
not be updated in a timely fashion and a hardware system reset (also known as
an Automatic Server Recovery (ASR)) event will occur.
- The hpwdt driver also has three (3) module parameters. They are the following:
+ The hpwdt driver also has four (4) module parameters. They are the following:
soft_margin - allows the user to set the watchdog timer value
allow_kdump - allows the user to save off a kernel dump image after an NMI
nowayout - basic watchdog parameter that does not allow the timer to
be restarted or an impending ASR to be escaped.
+ priority - determines whether or not the hpwdt driver is first on the
+ die_notify list to handle NMIs or last. The default value
+ for this module parameter is 0 or LAST. If the user wants to
+ enable NMI sourcing then reload the hpwdt driver with
+ priority=1 (and boot with nmi_watchdog=0).
NOTE: More information about watchdog drivers in general, including the ioctl
interface to /dev/watchdog can be found in
Documentation/watchdog/watchdog-api.txt and Documentation/IPMI.txt.
- The NMI sourcing capability is disabled when the driver discovers that the
- nmi_watchdog is turned on (nmi_watchdog = 1). This is due to the inability to
+ The priority parameter was introduced due to other kernel software that relied
+ on handling NMIs (like oprofile). Keeping hpwdt's priority at 0 (or LAST)
+ enables the users of NMIs for non critical events to be work as expected.
+
+ The NMI sourcing capability is disabled by default due to the inability to
distinguish between "NMI Watchdog Ticks" and "HW generated NMI events" in the
Linux kernel. What this means is that the hpwdt nmi handler code is called
each time the NMI signal fires off. This could amount to several thousands of
NMIs in a matter of seconds. If a user sees the Linux kernel's "dazed and
confused" message in the logs or if the system gets into a hung state, then
- the user should reboot with nmi_watchdog=0.
+ the hpwdt driver can be reloaded with the "priority" module parameter set
+ (priority=1).
1. If the kernel has not been booted with nmi_watchdog turned off then
edit /boot/grub/menu.lst and place the nmi_watchdog=0 at the end of the
currently booting kernel line.
2. reboot the sever
+ 3. Once the system comes up perform a rmmod hpwdt
+ 4. insmod /lib/modules/`uname -r`/kernel/drivers/char/watchdog/hpwdt.ko priority=1
Now, the hpwdt can successfully receive and source the NMI and provide a log
message that details the reason for the NMI (as determined by the HP BIOS).
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-01 11:39:56 +0000