diff options
Diffstat (limited to 'arch/arm/mach-at91/Kconfig')
| -rw-r--r-- | arch/arm/mach-at91/Kconfig | 91 |
1 files changed, 54 insertions, 37 deletions
diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig index c71e39ed092..0b2ee953f16 100644 --- a/arch/arm/mach-at91/Kconfig +++ b/arch/arm/mach-at91/Kconfig @@ -1,5 +1,20 @@ if ARCH_AT91 +config HAVE_AT91_DATAFLASH_CARD + bool + +config HAVE_NAND_ATMEL_BUSWIDTH_16 + bool + +config HAVE_AT91_USART3 + bool + +config HAVE_AT91_USART4 + bool + +config HAVE_AT91_USART5 + bool + menu "Atmel AT91 System-on-Chip" choice @@ -10,54 +25,69 @@ config ARCH_AT91RM9200 select CPU_ARM920T select GENERIC_TIME select GENERIC_CLOCKEVENTS + select HAVE_AT91_USART3 config ARCH_AT91SAM9260 bool "AT91SAM9260 or AT91SAM9XE" select CPU_ARM926T select GENERIC_TIME select GENERIC_CLOCKEVENTS + select HAVE_AT91_USART3 + select HAVE_AT91_USART4 + select HAVE_AT91_USART5 config ARCH_AT91SAM9261 bool "AT91SAM9261" select CPU_ARM926T select GENERIC_TIME select GENERIC_CLOCKEVENTS + select HAVE_FB_ATMEL config ARCH_AT91SAM9G10 bool "AT91SAM9G10" select CPU_ARM926T select GENERIC_TIME select GENERIC_CLOCKEVENTS + select HAVE_FB_ATMEL config ARCH_AT91SAM9263 bool "AT91SAM9263" select CPU_ARM926T select GENERIC_TIME select GENERIC_CLOCKEVENTS + select HAVE_FB_ATMEL config ARCH_AT91SAM9RL bool "AT91SAM9RL" select CPU_ARM926T select GENERIC_TIME select GENERIC_CLOCKEVENTS + select HAVE_AT91_USART3 + select HAVE_FB_ATMEL config ARCH_AT91SAM9G20 bool "AT91SAM9G20" select CPU_ARM926T select GENERIC_TIME select GENERIC_CLOCKEVENTS + select HAVE_AT91_USART3 + select HAVE_AT91_USART4 + select HAVE_AT91_USART5 config ARCH_AT91SAM9G45 bool "AT91SAM9G45" select CPU_ARM926T select GENERIC_TIME select GENERIC_CLOCKEVENTS + select HAVE_AT91_USART3 + select HAVE_FB_ATMEL config ARCH_AT91CAP9 bool "AT91CAP9" select CPU_ARM926T select GENERIC_TIME select GENERIC_CLOCKEVENTS + select HAVE_FB_ATMEL config ARCH_AT91X40 bool "AT91x40" @@ -76,89 +106,79 @@ comment "AT91RM9200 Board Type" config MACH_ONEARM bool "Ajeco 1ARM Single Board Computer" - depends on ARCH_AT91RM9200 help Select this if you are using Ajeco's 1ARM Single Board Computer. <http://www.ajeco.fi/products.htm> config ARCH_AT91RM9200DK bool "Atmel AT91RM9200-DK Development board" - depends on ARCH_AT91RM9200 + select HAVE_AT91_DATAFLASH_CARD help Select this if you are using Atmel's AT91RM9200-DK Development board. (Discontinued) config MACH_AT91RM9200EK bool "Atmel AT91RM9200-EK Evaluation Kit" - depends on ARCH_AT91RM9200 + select HAVE_AT91_DATAFLASH_CARD help Select this if you are using Atmel's AT91RM9200-EK Evaluation Kit. <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3507> config MACH_CSB337 bool "Cogent CSB337" - depends on ARCH_AT91RM9200 help Select this if you are using Cogent's CSB337 board. <http://www.cogcomp.com/csb_csb337.htm> config MACH_CSB637 bool "Cogent CSB637" - depends on ARCH_AT91RM9200 help Select this if you are using Cogent's CSB637 board. <http://www.cogcomp.com/csb_csb637.htm> config MACH_CARMEVA bool "Conitec ARM&EVA" - depends on ARCH_AT91RM9200 help Select this if you are using Conitec's AT91RM9200-MCU-Module. <http://www.conitec.net/english/linuxboard.htm> config MACH_ATEB9200 bool "Embest ATEB9200" - depends on ARCH_AT91RM9200 help Select this if you are using Embest's ATEB9200 board. <http://www.embedinfo.com/english/product/ATEB9200.asp> config MACH_KB9200 bool "KwikByte KB920x" - depends on ARCH_AT91RM9200 help Select this if you are using KwikByte's KB920x board. <http://kwikbyte.com/KB9202_description_new.htm> config MACH_PICOTUX2XX bool "picotux 200" - depends on ARCH_AT91RM9200 help Select this if you are using a picotux 200. <http://www.picotux.com/> config MACH_KAFA bool "Sperry-Sun KAFA board" - depends on ARCH_AT91RM9200 help Select this if you are using Sperry-Sun's KAFA board. config MACH_ECBAT91 bool "emQbit ECB_AT91 SBC" - depends on ARCH_AT91RM9200 + select HAVE_AT91_DATAFLASH_CARD help Select this if you are using emQbit's ECB_AT91 board. <http://wiki.emqbit.com/free-ecb-at91> config MACH_YL9200 bool "ucDragon YL-9200" - depends on ARCH_AT91RM9200 help Select this if you are using the ucDragon YL-9200 board. config MACH_CPUAT91 bool "Eukrea CPUAT91" - depends on ARCH_AT91RM9200 help Select this if you are using the Eukrea Electromatique's CPUAT91 board <http://www.eukrea.com/>. @@ -178,7 +198,6 @@ comment "AT91SAM9260 Variants" config ARCH_AT91SAM9260_SAM9XE bool "AT91SAM9XE" - depends on ARCH_AT91SAM9260 help Select this if you are using Atmel's AT91SAM9XE System-on-Chip. They are basically AT91SAM9260s with various sizes of embedded Flash. @@ -187,28 +206,27 @@ comment "AT91SAM9260 / AT91SAM9XE Board Type" config MACH_AT91SAM9260EK bool "Atmel AT91SAM9260-EK / AT91SAM9XE Evaluation Kit" - depends on ARCH_AT91SAM9260 + select HAVE_AT91_DATAFLASH_CARD + select HAVE_NAND_ATMEL_BUSWIDTH_16 help Select this if you are using Atmel's AT91SAM9260-EK or AT91SAM9XE Evaluation Kit <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3933> config MACH_CAM60 bool "KwikByte KB9260 (CAM60) board" - depends on ARCH_AT91SAM9260 help Select this if you are using KwikByte's KB9260 (CAM60) board based on the Atmel AT91SAM9260. <http://www.kwikbyte.com/KB9260.html> config MACH_SAM9_L9260 bool "Olimex SAM9-L9260 board" - depends on ARCH_AT91SAM9260 + select HAVE_AT91_DATAFLASH_CARD help Select this if you are using Olimex's SAM9-L9260 board based on the Atmel AT91SAM9260. <http://www.olimex.com/dev/sam9-L9260.html> config MACH_AFEB9260 bool "Custom afeb9260 board v1" - depends on ARCH_AT91SAM9260 help Select this if you are using custom afeb9260 board based on open hardware design. Select this for revision 1 of the board. @@ -217,21 +235,18 @@ config MACH_AFEB9260 config MACH_USB_A9260 bool "CALAO USB-A9260" - depends on ARCH_AT91SAM9260 help Select this if you are using a Calao Systems USB-A9260. <http://www.calao-systems.com> config MACH_QIL_A9260 bool "CALAO QIL-A9260 board" - depends on ARCH_AT91SAM9260 help Select this if you are using a Calao Systems QIL-A9260 Board. <http://www.calao-systems.com> config MACH_CPU9260 bool "Eukrea CPU9260 board" - depends on ARCH_AT91SAM9260 help Select this if you are using a Eukrea Electromatique's CPU9260 Board <http://www.eukrea.com/> @@ -246,7 +261,8 @@ comment "AT91SAM9261 Board Type" config MACH_AT91SAM9261EK bool "Atmel AT91SAM9261-EK Evaluation Kit" - depends on ARCH_AT91SAM9261 + select HAVE_AT91_DATAFLASH_CARD + select HAVE_NAND_ATMEL_BUSWIDTH_16 help Select this if you are using Atmel's AT91SAM9261-EK Evaluation Kit. <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3820> @@ -261,7 +277,8 @@ comment "AT91SAM9G10 Board Type" config MACH_AT91SAM9G10EK bool "Atmel AT91SAM9G10-EK Evaluation Kit" - depends on ARCH_AT91SAM9G10 + select HAVE_AT91_DATAFLASH_CARD + select HAVE_NAND_ATMEL_BUSWIDTH_16 help Select this if you are using Atmel's AT91SAM9G10-EK Evaluation Kit. <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4588> @@ -276,21 +293,21 @@ comment "AT91SAM9263 Board Type" config MACH_AT91SAM9263EK bool "Atmel AT91SAM9263-EK Evaluation Kit" - depends on ARCH_AT91SAM9263 + select HAVE_AT91_DATAFLASH_CARD + select HAVE_NAND_ATMEL_BUSWIDTH_16 help Select this if you are using Atmel's AT91SAM9263-EK Evaluation Kit. <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4057> config MACH_USB_A9263 bool "CALAO USB-A9263" - depends on ARCH_AT91SAM9263 help Select this if you are using a Calao Systems USB-A9263. <http://www.calao-systems.com> config MACH_NEOCORE926 bool "Adeneo NEOCORE926" - depends on ARCH_AT91SAM9263 + select HAVE_AT91_DATAFLASH_CARD help Select this if you are using the Adeneo Neocore 926 board. @@ -304,7 +321,6 @@ comment "AT91SAM9RL Board Type" config MACH_AT91SAM9RLEK bool "Atmel AT91SAM9RL-EK Evaluation Kit" - depends on ARCH_AT91SAM9RL help Select this if you are using Atmel's AT91SAM9RL-EK Evaluation Kit. @@ -318,14 +334,15 @@ comment "AT91SAM9G20 Board Type" config MACH_AT91SAM9G20EK bool "Atmel AT91SAM9G20-EK Evaluation Kit" - depends on ARCH_AT91SAM9G20 + select HAVE_AT91_DATAFLASH_CARD + select HAVE_NAND_ATMEL_BUSWIDTH_16 help Select this if you are using Atmel's AT91SAM9G20-EK Evaluation Kit that embeds only one SD/MMC slot. config MACH_AT91SAM9G20EK_2MMC bool "Atmel AT91SAM9G20-EK Evaluation Kit with 2 SD/MMC Slots" - depends on ARCH_AT91SAM9G20 + select HAVE_NAND_ATMEL_BUSWIDTH_16 help Select this if you are using an Atmel AT91SAM9G20-EK Evaluation Kit with 2 SD/MMC Slots. This is the case for AT91SAM9G20-EK rev. C and @@ -333,7 +350,6 @@ config MACH_AT91SAM9G20EK_2MMC config MACH_CPU9G20 bool "Eukrea CPU9G20 board" - depends on ARCH_AT91SAM9G20 help Select this if you are using a Eukrea Electromatique's CPU9G20 Board <http://www.eukrea.com/> @@ -348,7 +364,7 @@ comment "AT91SAM9G45 Board Type" config MACH_AT91SAM9G45EKES bool "Atmel AT91SAM9G45-EKES Evaluation Kit" - depends on ARCH_AT91SAM9G45 + select HAVE_NAND_ATMEL_BUSWIDTH_16 help Select this if you are using Atmel's AT91SAM9G45-EKES Evaluation Kit. "ES" at the end of the name means that this board is an @@ -364,7 +380,8 @@ comment "AT91CAP9 Board Type" config MACH_AT91CAP9ADK bool "Atmel AT91CAP9A-DK Evaluation Kit" - depends on ARCH_AT91CAP9 + select HAVE_AT91_DATAFLASH_CARD + select HAVE_NAND_ATMEL_BUSWIDTH_16 help Select this if you are using Atmel's AT91CAP9A-DK Evaluation Kit. <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4138> @@ -393,13 +410,13 @@ comment "AT91 Board Options" config MTD_AT91_DATAFLASH_CARD bool "Enable DataFlash Card support" - depends on (ARCH_AT91RM9200DK || MACH_AT91RM9200EK || MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9G10EK || MACH_AT91SAM9263EK || MACH_AT91SAM9G20EK || MACH_ECBAT91 || MACH_SAM9_L9260 || MACH_AT91CAP9ADK || MACH_NEOCORE926) + depends on HAVE_AT91_DATAFLASH_CARD help Enable support for the DataFlash card. config MTD_NAND_ATMEL_BUSWIDTH_16 bool "Enable 16-bit data bus interface to NAND flash" - depends on (MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9G10EK || MACH_AT91SAM9263EK || MACH_AT91SAM9G20EK || MACH_AT91SAM9G20EK_2MMC || MACH_AT91SAM9G45EKES || MACH_AT91CAP9ADK) + depends on HAVE_NAND_ATMEL_BUSWIDTH_16 help On AT91SAM926x boards both types of NAND flash can be present (8 and 16 bit data bus width). @@ -461,15 +478,15 @@ config AT91_EARLY_USART2 config AT91_EARLY_USART3 bool "USART3" - depends on (ARCH_AT91RM9200 || ARCH_AT91SAM9RL || ARCH_AT91SAM9260 || ARCH_AT91SAM9G20 || ARCH_AT91SAM9G45) + depends on HAVE_AT91_USART3 config AT91_EARLY_USART4 bool "USART4" - depends on ARCH_AT91SAM9260 || ARCH_AT91SAM9G20 + depends on HAVE_AT91_USART4 config AT91_EARLY_USART5 bool "USART5" - depends on ARCH_AT91SAM9260 || ARCH_AT91SAM9G20 + depends on HAVE_AT91_USART5 endchoice |