aboutsummaryrefslogtreecommitdiff
path: root/arch/arm/mach-omap1
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mach-omap1')
-rw-r--r--arch/arm/mach-omap1/Kconfig144
-rw-r--r--arch/arm/mach-omap1/Makefile30
-rw-r--r--arch/arm/mach-omap1/Makefile.boot3
-rw-r--r--arch/arm/mach-omap1/board-generic.c99
-rw-r--r--arch/arm/mach-omap1/board-h2.c188
-rw-r--r--arch/arm/mach-omap1/board-h3.c206
-rw-r--r--arch/arm/mach-omap1/board-innovator.c281
-rw-r--r--arch/arm/mach-omap1/board-netstar.c152
-rw-r--r--arch/arm/mach-omap1/board-osk.c170
-rw-r--r--arch/arm/mach-omap1/board-perseus2.c190
-rw-r--r--arch/arm/mach-omap1/board-voiceblue.c257
-rw-r--r--arch/arm/mach-omap1/fpga.c188
-rw-r--r--arch/arm/mach-omap1/id.c188
-rw-r--r--arch/arm/mach-omap1/io.c115
-rw-r--r--arch/arm/mach-omap1/irq.c234
-rw-r--r--arch/arm/mach-omap1/leds-h2p2-debug.c144
-rw-r--r--arch/arm/mach-omap1/leds-innovator.c103
-rw-r--r--arch/arm/mach-omap1/leds-osk.c194
-rw-r--r--arch/arm/mach-omap1/leds.c61
-rw-r--r--arch/arm/mach-omap1/leds.h3
-rw-r--r--arch/arm/mach-omap1/serial.c200
-rw-r--r--arch/arm/mach-omap1/time.c436
22 files changed, 3586 insertions, 0 deletions
diff --git a/arch/arm/mach-omap1/Kconfig b/arch/arm/mach-omap1/Kconfig
new file mode 100644
index 00000000000..7408ac94f77
--- /dev/null
+++ b/arch/arm/mach-omap1/Kconfig
@@ -0,0 +1,144 @@
+comment "OMAP Core Type"
+ depends on ARCH_OMAP1
+
+config ARCH_OMAP730
+ depends on ARCH_OMAP1
+ bool "OMAP730 Based System"
+ select ARCH_OMAP_OTG
+
+config ARCH_OMAP1510
+ depends on ARCH_OMAP1
+ default y
+ bool "OMAP1510 Based System"
+
+config ARCH_OMAP16XX
+ depends on ARCH_OMAP1
+ bool "OMAP16xx Based System"
+ select ARCH_OMAP_OTG
+
+comment "OMAP Board Type"
+ depends on ARCH_OMAP1
+
+config MACH_OMAP_INNOVATOR
+ bool "TI Innovator"
+ depends on ARCH_OMAP1 && (ARCH_OMAP1510 || ARCH_OMAP16XX)
+ help
+ TI OMAP 1510 or 1610 Innovator board support. Say Y here if you
+ have such a board.
+
+config MACH_OMAP_H2
+ bool "TI H2 Support"
+ depends on ARCH_OMAP1 && ARCH_OMAP16XX
+ help
+ TI OMAP 1610/1611B H2 board support. Say Y here if you have such
+ a board.
+
+config MACH_OMAP_H3
+ bool "TI H3 Support"
+ depends on ARCH_OMAP1 && ARCH_OMAP16XX
+ help
+ TI OMAP 1710 H3 board support. Say Y here if you have such
+ a board.
+
+config MACH_OMAP_OSK
+ bool "TI OSK Support"
+ depends on ARCH_OMAP1 && ARCH_OMAP16XX
+ help
+ TI OMAP 5912 OSK (OMAP Starter Kit) board support. Say Y here
+ if you have such a board.
+
+config MACH_OMAP_PERSEUS2
+ bool "TI Perseus2"
+ depends on ARCH_OMAP1 && ARCH_OMAP730
+ help
+ Support for TI OMAP 730 Perseus2 board. Say Y here if you have such
+ a board.
+
+config MACH_VOICEBLUE
+ bool "Voiceblue"
+ depends on ARCH_OMAP1 && ARCH_OMAP1510
+ help
+ Support for Voiceblue GSM/VoIP gateway. Say Y here if you have
+ such a board.
+
+config MACH_NETSTAR
+ bool "NetStar"
+ depends on ARCH_OMAP1 && ARCH_OMAP1510
+ help
+ Support for NetStar PBX. Say Y here if you have such a board.
+
+config MACH_OMAP_GENERIC
+ bool "Generic OMAP board"
+ depends on ARCH_OMAP1 && (ARCH_OMAP1510 || ARCH_OMAP16XX)
+ help
+ Support for generic OMAP-1510, 1610 or 1710 board with
+ no FPGA. Can be used as template for porting Linux to
+ custom OMAP boards. Say Y here if you have a custom
+ board.
+
+comment "OMAP CPU Speed"
+ depends on ARCH_OMAP1
+
+config OMAP_CLOCKS_SET_BY_BOOTLOADER
+ bool "OMAP clocks set by bootloader"
+ depends on ARCH_OMAP1
+ help
+ Enable this option to prevent the kernel from overriding the clock
+ frequencies programmed by bootloader for MPU, DSP, MMUs, TC,
+ internal LCD controller and MPU peripherals.
+
+config OMAP_ARM_216MHZ
+ bool "OMAP ARM 216 MHz CPU (1710 only)"
+ depends on ARCH_OMAP1 && ARCH_OMAP16XX
+ help
+ Enable 216 MHz clock for OMAP1710 CPU. If unsure, say N.
+
+config OMAP_ARM_195MHZ
+ bool "OMAP ARM 195 MHz CPU"
+ depends on ARCH_OMAP1 && ARCH_OMAP730
+ help
+ Enable 195MHz clock for OMAP CPU. If unsure, say N.
+
+config OMAP_ARM_192MHZ
+ bool "OMAP ARM 192 MHz CPU"
+ depends on ARCH_OMAP1 && ARCH_OMAP16XX
+ help
+ Enable 192MHz clock for OMAP CPU. If unsure, say N.
+
+config OMAP_ARM_182MHZ
+ bool "OMAP ARM 182 MHz CPU"
+ depends on ARCH_OMAP1 && ARCH_OMAP730
+ help
+ Enable 182MHz clock for OMAP CPU. If unsure, say N.
+
+config OMAP_ARM_168MHZ
+ bool "OMAP ARM 168 MHz CPU"
+ depends on ARCH_OMAP1 && (ARCH_OMAP1510 || ARCH_OMAP16XX || ARCH_OMAP730)
+ help
+ Enable 168MHz clock for OMAP CPU. If unsure, say N.
+
+config OMAP_ARM_150MHZ
+ bool "OMAP ARM 150 MHz CPU"
+ depends on ARCH_OMAP1 && ARCH_OMAP1510
+ help
+ Enable 150MHz clock for OMAP CPU. If unsure, say N.
+
+config OMAP_ARM_120MHZ
+ bool "OMAP ARM 120 MHz CPU"
+ depends on ARCH_OMAP1 && (ARCH_OMAP1510 || ARCH_OMAP16XX || ARCH_OMAP730)
+ help
+ Enable 120MHz clock for OMAP CPU. If unsure, say N.
+
+config OMAP_ARM_60MHZ
+ bool "OMAP ARM 60 MHz CPU"
+ depends on ARCH_OMAP1 && (ARCH_OMAP1510 || ARCH_OMAP16XX || ARCH_OMAP730)
+ default y
+ help
+ Enable 60MHz clock for OMAP CPU. If unsure, say Y.
+
+config OMAP_ARM_30MHZ
+ bool "OMAP ARM 30 MHz CPU"
+ depends on ARCH_OMAP1 && (ARCH_OMAP1510 || ARCH_OMAP16XX || ARCH_OMAP730)
+ help
+ Enable 30MHz clock for OMAP CPU. If unsure, say N.
+
diff --git a/arch/arm/mach-omap1/Makefile b/arch/arm/mach-omap1/Makefile
new file mode 100644
index 00000000000..d386fd913f0
--- /dev/null
+++ b/arch/arm/mach-omap1/Makefile
@@ -0,0 +1,30 @@
+#
+# Makefile for the linux kernel.
+#
+
+# Common support
+obj-y := io.o id.o irq.o time.o serial.o
+led-y := leds.o
+
+# Specific board support
+obj-$(CONFIG_MACH_OMAP_H2) += board-h2.o
+obj-$(CONFIG_MACH_OMAP_INNOVATOR) += board-innovator.o
+obj-$(CONFIG_MACH_OMAP_GENERIC) += board-generic.o
+obj-$(CONFIG_MACH_OMAP_PERSEUS2) += board-perseus2.o
+obj-$(CONFIG_MACH_OMAP_OSK) += board-osk.o
+obj-$(CONFIG_MACH_OMAP_H3) += board-h3.o
+obj-$(CONFIG_MACH_VOICEBLUE) += board-voiceblue.o
+obj-$(CONFIG_MACH_NETSTAR) += board-netstar.o
+
+ifeq ($(CONFIG_ARCH_OMAP1510),y)
+# Innovator-1510 FPGA
+obj-$(CONFIG_MACH_OMAP_INNOVATOR) += fpga.o
+endif
+
+# LEDs support
+led-$(CONFIG_MACH_OMAP_H2) += leds-h2p2-debug.o
+led-$(CONFIG_MACH_OMAP_INNOVATOR) += leds-innovator.o
+led-$(CONFIG_MACH_OMAP_PERSEUS2) += leds-h2p2-debug.o
+led-$(CONFIG_MACH_OMAP_OSK) += leds-osk.o
+obj-$(CONFIG_LEDS) += $(led-y)
+
diff --git a/arch/arm/mach-omap1/Makefile.boot b/arch/arm/mach-omap1/Makefile.boot
new file mode 100644
index 00000000000..292d56c5a88
--- /dev/null
+++ b/arch/arm/mach-omap1/Makefile.boot
@@ -0,0 +1,3 @@
+ zreladdr-y := 0x10008000
+params_phys-y := 0x10000100
+initrd_phys-y := 0x10800000
diff --git a/arch/arm/mach-omap1/board-generic.c b/arch/arm/mach-omap1/board-generic.c
new file mode 100644
index 00000000000..122796ebe8f
--- /dev/null
+++ b/arch/arm/mach-omap1/board-generic.c
@@ -0,0 +1,99 @@
+/*
+ * linux/arch/arm/mach-omap1/board-generic.c
+ *
+ * Modified from board-innovator1510.c
+ *
+ * Code for generic OMAP board. Should work on many OMAP systems where
+ * the device drivers take care of all the necessary hardware initialization.
+ * Do not put any board specific code to this file; create a new machine
+ * type if you need custom low-level initializations.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/device.h>
+
+#include <asm/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <asm/arch/gpio.h>
+#include <asm/arch/mux.h>
+#include <asm/arch/usb.h>
+#include <asm/arch/board.h>
+#include <asm/arch/common.h>
+
+static int __initdata generic_serial_ports[OMAP_MAX_NR_PORTS] = {1, 1, 1};
+
+static void __init omap_generic_init_irq(void)
+{
+ omap_init_irq();
+}
+
+/* assume no Mini-AB port */
+
+#ifdef CONFIG_ARCH_OMAP1510
+static struct omap_usb_config generic1510_usb_config __initdata = {
+ .register_host = 1,
+ .register_dev = 1,
+ .hmc_mode = 16,
+ .pins[0] = 3,
+};
+#endif
+
+#if defined(CONFIG_ARCH_OMAP16XX)
+static struct omap_usb_config generic1610_usb_config __initdata = {
+ .register_host = 1,
+ .register_dev = 1,
+ .hmc_mode = 16,
+ .pins[0] = 6,
+};
+#endif
+
+static struct omap_board_config_kernel generic_config[] = {
+ { OMAP_TAG_USB, NULL },
+};
+
+static void __init omap_generic_init(void)
+{
+ /*
+ * Make sure the serial ports are muxed on at this point.
+ * You have to mux them off in device drivers later on
+ * if not needed.
+ */
+#ifdef CONFIG_ARCH_OMAP1510
+ if (cpu_is_omap1510()) {
+ generic_config[0].data = &generic1510_usb_config;
+ }
+#endif
+#if defined(CONFIG_ARCH_OMAP16XX)
+ if (!cpu_is_omap1510()) {
+ generic_config[0].data = &generic1610_usb_config;
+ }
+#endif
+ omap_board_config = generic_config;
+ omap_board_config_size = ARRAY_SIZE(generic_config);
+ omap_serial_init(generic_serial_ports);
+}
+
+static void __init omap_generic_map_io(void)
+{
+ omap_map_common_io()
+}
+
+MACHINE_START(OMAP_GENERIC, "Generic OMAP1510/1610/1710")
+ /* Maintainer: Tony Lindgren <tony@atomide.com> */
+ .phys_ram = 0x10000000,
+ .phys_io = 0xfff00000,
+ .io_pg_offst = ((0xfef00000) >> 18) & 0xfffc,
+ .boot_params = 0x10000100,
+ .map_io = omap_generic_map_io,
+ .init_irq = omap_generic_init_irq,
+ .init_machine = omap_generic_init,
+ .timer = &omap_timer,
+MACHINE_END
diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c
new file mode 100644
index 00000000000..f4983ee95ab
--- /dev/null
+++ b/arch/arm/mach-omap1/board-h2.c
@@ -0,0 +1,188 @@
+/*
+ * linux/arch/arm/mach-omap1/board-h2.c
+ *
+ * Board specific inits for OMAP-1610 H2
+ *
+ * Copyright (C) 2001 RidgeRun, Inc.
+ * Author: Greg Lonnon <glonnon@ridgerun.com>
+ *
+ * Copyright (C) 2002 MontaVista Software, Inc.
+ *
+ * Separated FPGA interrupts from innovator1510.c and cleaned up for 2.6
+ * Copyright (C) 2004 Nokia Corporation by Tony Lindrgen <tony@atomide.com>
+ *
+ * H2 specific changes and cleanup
+ * Copyright (C) 2004 Nokia Corporation by Imre Deak <imre.deak@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/delay.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+
+#include <asm/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/flash.h>
+#include <asm/mach/map.h>
+
+#include <asm/arch/gpio.h>
+#include <asm/arch/tc.h>
+#include <asm/arch/usb.h>
+#include <asm/arch/common.h>
+
+extern int omap_gpio_init(void);
+
+static int __initdata h2_serial_ports[OMAP_MAX_NR_PORTS] = {1, 1, 1};
+
+static struct mtd_partition h2_partitions[] = {
+ /* bootloader (U-Boot, etc) in first sector */
+ {
+ .name = "bootloader",
+ .offset = 0,
+ .size = SZ_128K,
+ .mask_flags = MTD_WRITEABLE, /* force read-only */
+ },
+ /* bootloader params in the next sector */
+ {
+ .name = "params",
+ .offset = MTDPART_OFS_APPEND,
+ .size = SZ_128K,
+ .mask_flags = 0,
+ },
+ /* kernel */
+ {
+ .name = "kernel",
+ .offset = MTDPART_OFS_APPEND,
+ .size = SZ_2M,
+ .mask_flags = 0
+ },
+ /* file system */
+ {
+ .name = "filesystem",
+ .offset = MTDPART_OFS_APPEND,
+ .size = MTDPART_SIZ_FULL,
+ .mask_flags = 0
+ }
+};
+
+static struct flash_platform_data h2_flash_data = {
+ .map_name = "cfi_probe",
+ .width = 2,
+ .parts = h2_partitions,
+ .nr_parts = ARRAY_SIZE(h2_partitions),
+};
+
+static struct resource h2_flash_resource = {
+ .start = OMAP_CS2B_PHYS,
+ .end = OMAP_CS2B_PHYS + OMAP_CS2B_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device h2_flash_device = {
+ .name = "omapflash",
+ .id = 0,
+ .dev = {
+ .platform_data = &h2_flash_data,
+ },
+ .num_resources = 1,
+ .resource = &h2_flash_resource,
+};
+
+static struct resource h2_smc91x_resources[] = {
+ [0] = {
+ .start = OMAP1610_ETHR_START, /* Physical */
+ .end = OMAP1610_ETHR_START + 0xf,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = OMAP_GPIO_IRQ(0),
+ .end = OMAP_GPIO_IRQ(0),
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device h2_smc91x_device = {
+ .name = "smc91x",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(h2_smc91x_resources),
+ .resource = h2_smc91x_resources,
+};
+
+static struct platform_device *h2_devices[] __initdata = {
+ &h2_flash_device,
+ &h2_smc91x_device,
+};
+
+static void __init h2_init_smc91x(void)
+{
+ if ((omap_request_gpio(0)) < 0) {
+ printk("Error requesting gpio 0 for smc91x irq\n");
+ return;
+ }
+ omap_set_gpio_edge_ctrl(0, OMAP_GPIO_FALLING_EDGE);
+}
+
+void h2_init_irq(void)
+{
+ omap_init_irq();
+ omap_gpio_init();
+ h2_init_smc91x();
+}
+
+static struct omap_usb_config h2_usb_config __initdata = {
+ /* usb1 has a Mini-AB port and external isp1301 transceiver */
+ .otg = 2,
+
+#ifdef CONFIG_USB_GADGET_OMAP
+ .hmc_mode = 19, // 0:host(off) 1:dev|otg 2:disabled
+ // .hmc_mode = 21, // 0:host(off) 1:dev(loopback) 2:host(loopback)
+#elif defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
+ /* needs OTG cable, or NONSTANDARD (B-to-MiniB) */
+ .hmc_mode = 20, // 1:dev|otg(off) 1:host 2:disabled
+#endif
+
+ .pins[1] = 3,
+};
+
+static struct omap_mmc_config h2_mmc_config __initdata = {
+ .mmc_blocks = 1,
+ .mmc1_power_pin = -1, /* tps65010 gpio3 */
+ .mmc1_switch_pin = OMAP_MPUIO(1),
+};
+
+static struct omap_board_config_kernel h2_config[] = {
+ { OMAP_TAG_USB, &h2_usb_config },
+ { OMAP_TAG_MMC, &h2_mmc_config },
+};
+
+static void __init h2_init(void)
+{
+ platform_add_devices(h2_devices, ARRAY_SIZE(h2_devices));
+ omap_board_config = h2_config;
+ omap_board_config_size = ARRAY_SIZE(h2_config);
+}
+
+static void __init h2_map_io(void)
+{
+ omap_map_common_io();
+ omap_serial_init(h2_serial_ports);
+}
+
+MACHINE_START(OMAP_H2, "TI-H2")
+ /* Maintainer: Imre Deak <imre.deak@nokia.com> */
+ .phys_ram = 0x10000000,
+ .phys_io = 0xfff00000,
+ .io_pg_offst = ((0xfef00000) >> 18) & 0xfffc,
+ .boot_params = 0x10000100,
+ .map_io = h2_map_io,
+ .init_irq = h2_init_irq,
+ .init_machine = h2_init,
+ .timer = &omap_timer,
+MACHINE_END
diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c
new file mode 100644
index 00000000000..7cd419d61b4
--- /dev/null
+++ b/arch/arm/mach-omap1/board-h3.c
@@ -0,0 +1,206 @@
+/*
+ * linux/arch/arm/mach-omap1/board-h3.c
+ *
+ * This file contains OMAP1710 H3 specific code.
+ *
+ * Copyright (C) 2004 Texas Instruments, Inc.
+ * Copyright (C) 2002 MontaVista Software, Inc.
+ * Copyright (C) 2001 RidgeRun, Inc.
+ * Author: RidgeRun, Inc.
+ * Greg Lonnon (glonnon@ridgerun.com) or info@ridgerun.com
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/config.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/major.h>
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/errno.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+
+#include <asm/setup.h>
+#include <asm/page.h>
+#include <asm/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/flash.h>
+#include <asm/mach/map.h>
+
+#include <asm/arch/gpio.h>
+#include <asm/arch/irqs.h>
+#include <asm/arch/mux.h>
+#include <asm/arch/tc.h>
+#include <asm/arch/usb.h>
+#include <asm/arch/common.h>
+
+extern int omap_gpio_init(void);
+
+static int __initdata h3_serial_ports[OMAP_MAX_NR_PORTS] = {1, 1, 1};
+
+static struct mtd_partition h3_partitions[] = {
+ /* bootloader (U-Boot, etc) in first sector */
+ {
+ .name = "bootloader",
+ .offset = 0,
+ .size = SZ_128K,
+ .mask_flags = MTD_WRITEABLE, /* force read-only */
+ },
+ /* bootloader params in the next sector */
+ {
+ .name = "params",
+ .offset = MTDPART_OFS_APPEND,
+ .size = SZ_128K,
+ .mask_flags = 0,
+ },
+ /* kernel */
+ {
+ .name = "kernel",
+ .offset = MTDPART_OFS_APPEND,
+ .size = SZ_2M,
+ .mask_flags = 0
+ },
+ /* file system */
+ {
+ .name = "filesystem",
+ .offset = MTDPART_OFS_APPEND,
+ .size = MTDPART_SIZ_FULL,
+ .mask_flags = 0
+ }
+};
+
+static struct flash_platform_data h3_flash_data = {
+ .map_name = "cfi_probe",
+ .width = 2,
+ .parts = h3_partitions,
+ .nr_parts = ARRAY_SIZE(h3_partitions),
+};
+
+static struct resource h3_flash_resource = {
+ .start = OMAP_CS2B_PHYS,
+ .end = OMAP_CS2B_PHYS + OMAP_CS2B_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device flash_device = {
+ .name = "omapflash",
+ .id = 0,
+ .dev = {
+ .platform_data = &h3_flash_data,
+ },
+ .num_resources = 1,
+ .resource = &h3_flash_resource,
+};
+
+static struct resource smc91x_resources[] = {
+ [0] = {
+ .start = OMAP1710_ETHR_START, /* Physical */
+ .end = OMAP1710_ETHR_START + 0xf,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = OMAP_GPIO_IRQ(40),
+ .end = OMAP_GPIO_IRQ(40),
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device smc91x_device = {
+ .name = "smc91x",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(smc91x_resources),
+ .resource = smc91x_resources,
+};
+
+#define GPTIMER_BASE 0xFFFB1400
+#define GPTIMER_REGS(x) (0xFFFB1400 + (x * 0x800))
+#define GPTIMER_REGS_SIZE 0x46
+
+static struct resource intlat_resources[] = {
+ [0] = {
+ .start = GPTIMER_REGS(0), /* Physical */
+ .end = GPTIMER_REGS(0) + GPTIMER_REGS_SIZE,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = INT_1610_GPTIMER1,
+ .end = INT_1610_GPTIMER1,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device intlat_device = {
+ .name = "omap_intlat",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(intlat_resources),
+ .resource = intlat_resources,
+};
+
+static struct platform_device *devices[] __initdata = {
+ &flash_device,
+ &smc91x_device,
+ &intlat_device,
+};
+
+static struct omap_usb_config h3_usb_config __initdata = {
+ /* usb1 has a Mini-AB port and external isp1301 transceiver */
+ .otg = 2,
+
+#ifdef CONFIG_USB_GADGET_OMAP
+ .hmc_mode = 19, /* 0:host(off) 1:dev|otg 2:disabled */
+#elif defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
+ /* NONSTANDARD CABLE NEEDED (B-to-Mini-B) */
+ .hmc_mode = 20, /* 1:dev|otg(off) 1:host 2:disabled */
+#endif
+
+ .pins[1] = 3,
+};
+
+static struct omap_board_config_kernel h3_config[] = {
+ { OMAP_TAG_USB, &h3_usb_config },
+};
+
+static void __init h3_init(void)
+{
+ (void) platform_add_devices(devices, ARRAY_SIZE(devices));
+}
+
+static void __init h3_init_smc91x(void)
+{
+ omap_cfg_reg(W15_1710_GPIO40);
+ if (omap_request_gpio(40) < 0) {
+ printk("Error requesting gpio 40 for smc91x irq\n");
+ return;
+ }
+ omap_set_gpio_edge_ctrl(40, OMAP_GPIO_FALLING_EDGE);
+}
+
+void h3_init_irq(void)
+{
+ omap_init_irq();
+ omap_gpio_init();
+ h3_init_smc91x();
+}
+
+static void __init h3_map_io(void)
+{
+ omap_map_common_io();
+ omap_serial_init(h3_serial_ports);
+}
+
+MACHINE_START(OMAP_H3, "TI OMAP1710 H3 board")
+ /* Maintainer: Texas Instruments, Inc. */
+ .phys_ram = 0x10000000,
+ .phys_io = 0xfff00000,
+ .io_pg_offst = ((0xfef00000) >> 18) & 0xfffc,
+ .boot_params = 0x10000100,
+ .map_io = h3_map_io,
+ .init_irq = h3_init_irq,
+ .init_machine = h3_init,
+ .timer = &omap_timer,
+MACHINE_END
diff --git a/arch/arm/mach-omap1/board-innovator.c b/arch/arm/mach-omap1/board-innovator.c
new file mode 100644
index 00000000000..91de60a91ef
--- /dev/null
+++ b/arch/arm/mach-omap1/board-innovator.c
@@ -0,0 +1,281 @@
+/*
+ * linux/arch/arm/mach-omap1/board-innovator.c
+ *
+ * Board specific inits for OMAP-1510 and OMAP-1610 Innovator
+ *
+ * Copyright (C) 2001 RidgeRun, Inc.
+ * Author: Greg Lonnon <glonnon@ridgerun.com>
+ *
+ * Copyright (C) 2002 MontaVista Software, Inc.
+ *
+ * Separated FPGA interrupts from innovator1510.c and cleaned up for 2.6
+ * Copyright (C) 2004 Nokia Corporation by Tony Lindrgen <tony@atomide.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/delay.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+
+#include <asm/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/flash.h>
+#include <asm/mach/map.h>
+
+#include <asm/arch/fpga.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/tc.h>
+#include <asm/arch/usb.h>
+#include <asm/arch/common.h>
+
+static int __initdata innovator_serial_ports[OMAP_MAX_NR_PORTS] = {1, 1, 1};
+
+static struct mtd_partition innovator_partitions[] = {
+ /* bootloader (U-Boot, etc) in first sector */
+ {
+ .name = "bootloader",
+ .offset = 0,
+ .size = SZ_128K,
+ .mask_flags = MTD_WRITEABLE, /* force read-only */
+ },
+ /* bootloader params in the next sector */
+ {
+ .name = "params",
+ .offset = MTDPART_OFS_APPEND,
+ .size = SZ_128K,
+ .mask_flags = 0,
+ },
+ /* kernel */
+ {
+ .name = "kernel",
+ .offset = MTDPART_OFS_APPEND,
+ .size = SZ_2M,
+ .mask_flags = 0
+ },
+ /* rest of flash1 is a file system */
+ {
+ .name = "rootfs",
+ .offset = MTDPART_OFS_APPEND,
+ .size = SZ_16M - SZ_2M - 2 * SZ_128K,
+ .mask_flags = 0
+ },
+ /* file system */
+ {
+ .name = "filesystem",
+ .offset = MTDPART_OFS_APPEND,
+ .size = MTDPART_SIZ_FULL,
+ .mask_flags = 0
+ }
+};
+
+static struct flash_platform_data innovator_flash_data = {
+ .map_name = "cfi_probe",
+ .width = 2,
+ .parts = innovator_partitions,
+ .nr_parts = ARRAY_SIZE(innovator_partitions),
+};
+
+static struct resource innovator_flash_resource = {
+ .start = OMAP_CS0_PHYS,
+ .end = OMAP_CS0_PHYS + SZ_32M - 1,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device innovator_flash_device = {
+ .name = "omapflash",
+ .id = 0,
+ .dev = {
+ .platform_data = &innovator_flash_data,
+ },
+ .num_resources = 1,
+ .resource = &innovator_flash_resource,
+};
+
+#ifdef CONFIG_ARCH_OMAP1510
+
+/* Only FPGA needs to be mapped here. All others are done with ioremap */
+static struct map_desc innovator1510_io_desc[] __initdata = {
+{ OMAP1510_FPGA_BASE, OMAP1510_FPGA_START, OMAP1510_FPGA_SIZE,
+ MT_DEVICE },
+};
+
+static struct resource innovator1510_smc91x_resources[] = {
+ [0] = {
+ .start = OMAP1510_FPGA_ETHR_START, /* Physical */
+ .end = OMAP1510_FPGA_ETHR_START + 0xf,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = OMAP1510_INT_ETHER,
+ .end = OMAP1510_INT_ETHER,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device innovator1510_smc91x_device = {
+ .name = "smc91x",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(innovator1510_smc91x_resources),
+ .resource = innovator1510_smc91x_resources,
+};
+
+static struct platform_device *innovator1510_devices[] __initdata = {
+ &innovator_flash_device,
+ &innovator1510_smc91x_device,
+};
+
+#endif /* CONFIG_ARCH_OMAP1510 */
+
+#ifdef CONFIG_ARCH_OMAP16XX
+
+static struct resource innovator1610_smc91x_resources[] = {
+ [0] = {
+ .start = INNOVATOR1610_ETHR_START, /* Physical */
+ .end = INNOVATOR1610_ETHR_START + 0xf,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = OMAP_GPIO_IRQ(0),
+ .end = OMAP_GPIO_IRQ(0),
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device innovator1610_smc91x_device = {
+ .name = "smc91x",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(innovator1610_smc91x_resources),
+ .resource = innovator1610_smc91x_resources,
+};
+
+static struct platform_device *innovator1610_devices[] __initdata = {
+ &innovator_flash_device,
+ &innovator1610_smc91x_device,
+};
+
+#endif /* CONFIG_ARCH_OMAP16XX */
+
+static void __init innovator_init_smc91x(void)
+{
+ if (cpu_is_omap1510()) {
+ fpga_write(fpga_read(OMAP1510_FPGA_RST) & ~1,
+ OMAP1510_FPGA_RST);
+ udelay(750);
+ } else {
+ if ((omap_request_gpio(0)) < 0) {
+ printk("Error requesting gpio 0 for smc91x irq\n");
+ return;
+ }
+ omap_set_gpio_edge_ctrl(0, OMAP_GPIO_RISING_EDGE);
+ }
+}
+
+void innovator_init_irq(void)
+{
+ omap_init_irq();
+ omap_gpio_init();
+#ifdef CONFIG_ARCH_OMAP1510
+ if (cpu_is_omap1510()) {
+ omap1510_fpga_init_irq();
+ }
+#endif
+ innovator_init_smc91x();
+}
+
+#ifdef CONFIG_ARCH_OMAP1510
+static struct omap_usb_config innovator1510_usb_config __initdata = {
+ /* for bundled non-standard host and peripheral cables */
+ .hmc_mode = 4,
+
+ .register_host = 1,
+ .pins[1] = 6,
+ .pins[2] = 6, /* Conflicts with UART2 */
+
+ .register_dev = 1,
+ .pins[0] = 2,
+};
+#endif
+
+#ifdef CONFIG_ARCH_OMAP16XX
+static struct omap_usb_config h2_usb_config __initdata = {
+ /* usb1 has a Mini-AB port and external isp1301 transceiver */
+ .otg = 2,
+
+#ifdef CONFIG_USB_GADGET_OMAP
+ .hmc_mode = 19, // 0:host(off) 1:dev|otg 2:disabled
+ // .hmc_mode = 21, // 0:host(off) 1:dev(loopback) 2:host(loopback)
+#elif defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
+ /* NONSTANDARD CABLE NEEDED (B-to-Mini-B) */
+ .hmc_mode = 20, // 1:dev|otg(off) 1:host 2:disabled
+#endif
+
+ .pins[1] = 3,
+};
+#endif
+
+static struct omap_board_config_kernel innovator_config[] = {
+ { OMAP_TAG_USB, NULL },
+};
+
+static void __init innovator_init(void)
+{
+#ifdef CONFIG_ARCH_OMAP1510
+ if (cpu_is_omap1510()) {
+ platform_add_devices(innovator1510_devices, ARRAY_SIZE(innovator1510_devices));
+ }
+#endif
+#ifdef CONFIG_ARCH_OMAP16XX
+ if (!cpu_is_omap1510()) {
+ platform_add_devices(innovator1610_devices, ARRAY_SIZE(innovator1610_devices));
+ }
+#endif
+
+#ifdef CONFIG_ARCH_OMAP1510
+ if (cpu_is_omap1510())
+ innovator_config[0].data = &innovator1510_usb_config;
+#endif
+#ifdef CONFIG_ARCH_OMAP16XX
+ if (cpu_is_omap1610())
+ innovator_config[0].data = &h2_usb_config;
+#endif
+ omap_board_config = innovator_config;
+ omap_board_config_size = ARRAY_SIZE(innovator_config);
+}
+
+static void __init innovator_map_io(void)
+{
+ omap_map_common_io();
+
+#ifdef CONFIG_ARCH_OMAP1510
+ if (cpu_is_omap1510()) {
+ iotable_init(innovator1510_io_desc, ARRAY_SIZE(innovator1510_io_desc));
+ udelay(10); /* Delay needed for FPGA */
+
+ /* Dump the Innovator FPGA rev early - useful info for support. */
+ printk("Innovator FPGA Rev %d.%d Board Rev %d\n",
+ fpga_read(OMAP1510_FPGA_REV_HIGH),
+ fpga_read(OMAP1510_FPGA_REV_LOW),
+ fpga_read(OMAP1510_FPGA_BOARD_REV));
+ }
+#endif
+ omap_serial_init(innovator_serial_ports);
+}
+
+MACHINE_START(OMAP_INNOVATOR, "TI-Innovator")
+ /* Maintainer: MontaVista Software, Inc. */
+ .phys_ram = 0x10000000,
+ .phys_io = 0xfff00000,
+ .io_pg_offst = ((0xfef00000) >> 18) & 0xfffc,
+ .boot_params = 0x10000100,
+ .map_io = innovator_map_io,
+ .init_irq = innovator_init_irq,
+ .init_machine = innovator_init,
+ .timer = &omap_timer,
+MACHINE_END
diff --git a/arch/arm/mach-omap1/board-netstar.c b/arch/arm/mach-omap1/board-netstar.c
new file mode 100644
index 00000000000..6750b201409
--- /dev/null
+++ b/arch/arm/mach-omap1/board-netstar.c
@@ -0,0 +1,152 @@
+/*
+ * Modified from board-generic.c
+ *
+ * Copyright (C) 2004 2N Telekomunikace, Ladislav Michl <michl@2n.cz>
+ *
+ * Code for Netstar OMAP board.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/notifier.h>
+#include <linux/reboot.h>
+
+#include <asm/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <asm/arch/gpio.h>
+#include <asm/arch/mux.h>
+#include <asm/arch/usb.h>
+#include <asm/arch/common.h>
+
+extern void __init omap_init_time(void);
+extern int omap_gpio_init(void);
+
+static struct resource netstar_smc91x_resources[] = {
+ [0] = {
+ .start = OMAP_CS1_PHYS + 0x300,
+ .end = OMAP_CS1_PHYS + 0x300 + 16,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = OMAP_GPIO_IRQ(8),
+ .end = OMAP_GPIO_IRQ(8),
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device netstar_smc91x_device = {
+ .name = "smc91x",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(netstar_smc91x_resources),
+ .resource = netstar_smc91x_resources,
+};
+
+static struct platform_device *netstar_devices[] __initdata = {
+ &netstar_smc91x_device,
+};
+
+static void __init netstar_init_irq(void)
+{
+ omap_init_irq();
+ omap_gpio_init();
+}
+
+static void __init netstar_init(void)
+{
+ /* green LED */
+ omap_request_gpio(4);
+ omap_set_gpio_direction(4, 0);
+ /* smc91x reset */
+ omap_request_gpio(7);
+ omap_set_gpio_direction(7, 0);
+ omap_set_gpio_dataout(7, 1);
+ udelay(2); /* wait at least 100ns */
+ omap_set_gpio_dataout(7, 0);
+ mdelay(50); /* 50ms until PHY ready */
+ /* smc91x interrupt pin */
+ omap_request_gpio(8);
+ omap_set_gpio_edge_ctrl(8, OMAP_GPIO_RISING_EDGE);
+
+ omap_request_gpio(12);
+ omap_request_gpio(13);
+ omap_request_gpio(14);
+ omap_request_gpio(15);
+ omap_set_gpio_edge_ctrl(12, OMAP_GPIO_FALLING_EDGE);
+ omap_set_gpio_edge_ctrl(13, OMAP_GPIO_FALLING_EDGE);
+ omap_set_gpio_edge_ctrl(14, OMAP_GPIO_FALLING_EDGE);
+ omap_set_gpio_edge_ctrl(15, OMAP_GPIO_FALLING_EDGE);
+
+ platform_add_devices(netstar_devices, ARRAY_SIZE(netstar_devices));
+
+ /* Switch on green LED */
+ omap_set_gpio_dataout(4, 0);
+ /* Switch off red LED */
+ omap_writeb(0x00, OMAP_LPG1_PMR); /* Disable clock */
+ omap_writeb(0x80, OMAP_LPG1_LCR);
+}
+
+static int __initdata omap_serial_ports[OMAP_MAX_NR_PORTS] = {1, 1, 1};
+
+static void __init netstar_map_io(void)
+{
+ omap_map_common_io();
+ omap_serial_init(omap_serial_ports);
+}
+
+#define MACHINE_PANICED 1
+#define MACHINE_REBOOTING 2
+#define MACHINE_REBOOT 4
+static unsigned long machine_state;
+
+static int panic_event(struct notifier_block *this, unsigned long event,
+ void *ptr)
+{
+ if (test_and_set_bit(MACHINE_PANICED, &machine_state))
+ return NOTIFY_DONE;
+
+ /* Switch off green LED */
+ omap_set_gpio_dataout(4, 1);
+ /* Flash red LED */
+ omap_writeb(0x78, OMAP_LPG1_LCR);
+ omap_writeb(0x01, OMAP_LPG1_PMR); /* Enable clock */
+
+ return NOTIFY_DONE;
+}
+
+static struct notifier_block panic_block = {
+ .notifier_call = panic_event,
+};
+
+static int __init netstar_late_init(void)
+{
+ /* TODO: Setup front panel switch here */
+
+ /* Setup panic notifier */
+ notifier_chain_register(&panic_notifier_list, &panic_block);
+
+ return 0;
+}
+
+postcore_initcall(netstar_late_init);
+
+MACHINE_START(NETSTAR, "NetStar OMAP5910")
+ /* Maintainer: Ladislav Michl <michl@2n.cz> */
+ .phys_ram = 0x10000000,
+ .phys_io = 0xfff00000,
+ .io_pg_offst = ((0xfef00000) >> 18) & 0xfffc,
+ .boot_params = 0x10000100,
+ .map_io = netstar_map_io,
+ .init_irq = netstar_init_irq,
+ .init_machine = netstar_init,
+ .timer = &omap_timer,
+MACHINE_END
diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c
new file mode 100644
index 00000000000..6844e536c69
--- /dev/null
+++ b/arch/arm/mach-omap1/board-osk.c
@@ -0,0 +1,170 @@
+/*
+ * linux/arch/arm/mach-omap1/board-osk.c
+ *
+ * Board specific init for OMAP5912 OSK
+ *
+ * Written by Dirk Behme <dirk.behme@de.bosch.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/device.h>
+
+#include <asm/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <asm/arch/gpio.h>
+#include <asm/arch/usb.h>
+#include <asm/arch/mux.h>
+#include <asm/arch/tc.h>
+#include <asm/arch/common.h>
+
+static struct map_desc osk5912_io_desc[] __initdata = {
+{ OMAP_OSK_NOR_FLASH_BASE, OMAP_OSK_NOR_FLASH_START, OMAP_OSK_NOR_FLASH_SIZE,
+ MT_DEVICE },
+};
+
+static int __initdata osk_serial_ports[OMAP_MAX_NR_PORTS] = {1, 0, 0};
+
+static struct resource osk5912_smc91x_resources[] = {
+ [0] = {
+ .start = OMAP_OSK_ETHR_START, /* Physical */
+ .end = OMAP_OSK_ETHR_START + 0xf,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = OMAP_GPIO_IRQ(0),
+ .end = OMAP_GPIO_IRQ(0),
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device osk5912_smc91x_device = {
+ .name = "smc91x",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(osk5912_smc91x_resources),
+ .resource = osk5912_smc91x_resources,
+};
+
+static struct resource osk5912_cf_resources[] = {
+ [0] = {
+ .start = OMAP_GPIO_IRQ(62),
+ .end = OMAP_GPIO_IRQ(62),
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device osk5912_cf_device = {
+ .name = "omap_cf",
+ .id = -1,
+ .dev = {
+ .platform_data = (void *) 2 /* CS2 */,
+ },
+ .num_resources = ARRAY_SIZE(osk5912_cf_resources),
+ .resource = osk5912_cf_resources,
+};
+
+static struct platform_device *osk5912_devices[] __initdata = {
+ &osk5912_smc91x_device,
+ &osk5912_cf_device,
+};
+
+static void __init osk_init_smc91x(void)
+{
+ if ((omap_request_gpio(0)) < 0) {
+ printk("Error requesting gpio 0 for smc91x irq\n");
+ return;
+ }
+ omap_set_gpio_edge_ctrl(0, OMAP_GPIO_RISING_EDGE);
+
+ /* Check EMIFS wait states to fix errors with SMC_GET_PKT_HDR */
+ EMIFS_CCS(1) |= 0x2;
+}
+
+static void __init osk_init_cf(void)
+{
+ omap_cfg_reg(M7_1610_GPIO62);
+ if ((omap_request_gpio(62)) < 0) {
+ printk("Error requesting gpio 62 for CF irq\n");
+ return;
+ }
+ /* it's really active-low */
+ omap_set_gpio_edge_ctrl(62, OMAP_GPIO_FALLING_EDGE);
+}
+
+void osk_init_irq(void)
+{
+ omap_init_irq();
+ omap_gpio_init();
+ osk_init_smc91x();
+ osk_init_cf();
+}
+
+static struct omap_usb_config osk_usb_config __initdata = {
+ /* has usb host connector (A) ... for development it can also
+ * be used, with a NONSTANDARD gender-bending cable/dongle, as
+ * a peripheral.
+ */
+#ifdef CONFIG_USB_GADGET_OMAP
+ .register_dev = 1,
+ .hmc_mode = 0,
+#else
+ .register_host = 1,
+ .hmc_mode = 16,
+ .rwc = 1,
+#endif
+ .pins[0] = 2,
+};
+
+static struct omap_board_config_kernel osk_config[] = {
+ { OMAP_TAG_USB, &osk_usb_config },
+};
+
+static void __init osk_init(void)
+{
+ platform_add_devices(osk5912_devices, ARRAY_SIZE(osk5912_devices));
+ omap_board_config = osk_config;
+ omap_board_config_size = ARRAY_SIZE(osk_config);
+ USB_TRANSCEIVER_CTRL_REG |= (3 << 1);
+}
+
+static void __init osk_map_io(void)
+{
+ omap_map_common_io();
+ iotable_init(osk5912_io_desc, ARRAY_SIZE(osk5912_io_desc));
+ omap_serial_init(osk_serial_ports);
+}
+
+MACHINE_START(OMAP_OSK, "TI-OSK")
+ /* Maintainer: Dirk Behme <dirk.behme@de.bosch.com> */
+ .phys_ram = 0x10000000,
+ .phys_io = 0xfff00000,
+ .io_pg_offst = ((0xfef00000) >> 18) & 0xfffc,
+ .boot_params = 0x10000100,
+ .map_io = osk_map_io,
+ .init_irq = osk_init_irq,
+ .init_machine = osk_init,
+ .timer = &omap_timer,
+MACHINE_END
diff --git a/arch/arm/mach-omap1/board-perseus2.c b/arch/arm/mach-omap1/board-perseus2.c
new file mode 100644
index 00000000000..213317392d9
--- /dev/null
+++ b/arch/arm/mach-omap1/board-perseus2.c
@@ -0,0 +1,190 @@
+/*
+ * linux/arch/arm/mach-omap1/board-perseus2.c
+ *
+ * Modified from board-generic.c
+ *
+ * Original OMAP730 support by Jean Pihet <j-pihet@ti.com>
+ * Updated for 2.6 by Kevin Hilman <kjh@hilman.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/delay.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+
+#include <asm/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/flash.h>
+#include <asm/mach/map.h>
+
+#include <asm/arch/gpio.h>
+#include <asm/arch/mux.h>
+#include <asm/arch/fpga.h>
+#include <asm/arch/common.h>
+
+static struct resource smc91x_resources[] = {
+ [0] = {
+ .start = H2P2_DBG_FPGA_ETHR_START, /* Physical */
+ .end = H2P2_DBG_FPGA_ETHR_START + 0xf,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = INT_730_MPU_EXT_NIRQ,
+ .end = 0,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static int __initdata p2_serial_ports[OMAP_MAX_NR_PORTS] = {1, 1, 0};
+
+static struct mtd_partition p2_partitions[] = {
+ /* bootloader (U-Boot, etc) in first sector */
+ {
+ .name = "bootloader",
+ .offset = 0,
+ .size = SZ_128K,
+ .mask_flags = MTD_WRITEABLE, /* force read-only */
+ },
+ /* bootloader params in the next sector */
+ {
+ .name = "params",
+ .offset = MTDPART_OFS_APPEND,
+ .size = SZ_128K,
+ .mask_flags = 0,
+ },
+ /* kernel */
+ {
+ .name = "kernel",
+ .offset = MTDPART_OFS_APPEND,
+ .size = SZ_2M,
+ .mask_flags = 0
+ },
+ /* rest of flash is a file system */
+ {
+ .name = "rootfs",
+ .offset = MTDPART_OFS_APPEND,
+ .size = MTDPART_SIZ_FULL,
+ .mask_flags = 0
+ },
+};
+
+static struct flash_platform_data p2_flash_data = {
+ .map_name = "cfi_probe",
+ .width = 2,
+ .parts = p2_partitions,
+ .nr_parts = ARRAY_SIZE(p2_partitions),
+};
+
+static struct resource p2_flash_resource = {
+ .start = OMAP_FLASH_0_START,
+ .end = OMAP_FLASH_0_START + OMAP_FLASH_0_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device p2_flash_device = {
+ .name = "omapflash",
+ .id = 0,
+ .dev = {
+ .platform_data = &p2_flash_data,
+ },
+ .num_resources = 1,
+ .resource = &p2_flash_resource,
+};
+
+static struct platform_device smc91x_device = {
+ .name = "smc91x",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(smc91x_resources),
+ .resource = smc91x_resources,
+};
+
+static struct platform_device *devices[] __initdata = {
+ &p2_flash_device,
+ &smc91x_device,
+};
+
+static void __init omap_perseus2_init(void)
+{
+ (void) platform_add_devices(devices, ARRAY_SIZE(devices));
+}
+
+static void __init perseus2_init_smc91x(void)
+{
+ fpga_write(1, H2P2_DBG_FPGA_LAN_RESET);
+ mdelay(50);
+ fpga_write(fpga_read(H2P2_DBG_FPGA_LAN_RESET) & ~1,
+ H2P2_DBG_FPGA_LAN_RESET);
+ mdelay(50);
+}
+
+void omap_perseus2_init_irq(void)
+{
+ omap_init_irq();
+ omap_gpio_init();
+ perseus2_init_smc91x();
+}
+
+/* Only FPGA needs to be mapped here. All others are done with ioremap */
+static struct map_desc omap_perseus2_io_desc[] __initdata = {
+ {H2P2_DBG_FPGA_BASE, H2P2_DBG_FPGA_START, H2P2_DBG_FPGA_SIZE,
+ MT_DEVICE},
+};
+
+static void __init omap_perseus2_map_io(void)
+{
+ omap_map_common_io();
+ iotable_init(omap_perseus2_io_desc,
+ ARRAY_SIZE(omap_perseus2_io_desc));
+
+ /* Early, board-dependent init */
+
+ /*
+ * Hold GSM Reset until needed
+ */
+ omap_writew(omap_readw(OMAP730_DSP_M_CTL) & ~1, OMAP730_DSP_M_CTL);
+
+ /*
+ * UARTs -> done automagically by 8250 driver
+ */
+
+ /*
+ * CSx timings, GPIO Mux ... setup
+ */
+
+ /* Flash: CS0 timings setup */
+ omap_writel(0x0000fff3, OMAP730_FLASH_CFG_0);
+ omap_writel(0x00000088, OMAP730_FLASH_ACFG_0);
+
+ /*
+ * Ethernet support trough the debug board
+ * CS1 timings setup
+ */
+ omap_writel(0x0000fff3, OMAP730_FLASH_CFG_1);
+ omap_writel(0x00000000, OMAP730_FLASH_ACFG_1);
+
+ /*
+ * Configure MPU_EXT_NIRQ IO in IO_CONF9 register,
+ * It is used as the Ethernet controller interrupt
+ */
+ omap_writel(omap_readl(OMAP730_IO_CONF_9) & 0x1FFFFFFF, OMAP730_IO_CONF_9);
+ omap_serial_init(p2_serial_ports);
+}
+
+MACHINE_START(OMAP_PERSEUS2, "OMAP730 Perseus2")
+ /* Maintainer: Kevin Hilman <kjh@hilman.org> */
+ .phys_ram = 0x10000000,
+ .phys_io = 0xfff00000,
+ .io_pg_offst = ((0xfef00000) >> 18) & 0xfffc,
+ .boot_params = 0x10000100,
+ .map_io = omap_perseus2_map_io,
+ .init_irq = omap_perseus2_init_irq,
+ .init_machine = omap_perseus2_init,
+ .timer = &omap_timer,
+MACHINE_END
diff --git a/arch/arm/mach-omap1/board-voiceblue.c b/arch/arm/mach-omap1/board-voiceblue.c
new file mode 100644
index 00000000000..e4228198899
--- /dev/null
+++ b/arch/arm/mach-omap1/board-voiceblue.c
@@ -0,0 +1,257 @@
+/*
+ * linux/arch/arm/mach-omap1/board-voiceblue.c
+ *
+ * Modified from board-generic.c
+ *
+ * Copyright (C) 2004 2N Telekomunikace, Ladislav Michl <michl@2n.cz>
+ *
+ * Code for OMAP5910 based VoiceBlue board (VoIP to GSM gateway).
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/notifier.h>
+#include <linux/reboot.h>
+#include <linux/serial_8250.h>
+#include <linux/serial_reg.h>
+
+#include <asm/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <asm/arch/gpio.h>
+#include <asm/arch/tc.h>
+#include <asm/arch/mux.h>
+#include <asm/arch/usb.h>
+#include <asm/arch/common.h>
+
+extern void omap_init_time(void);
+extern int omap_gpio_init(void);
+
+static struct plat_serial8250_port voiceblue_ports[] = {
+ {
+ .mapbase = (unsigned long)(OMAP_CS1_PHYS + 0x40000),
+ .irq = OMAP_GPIO_IRQ(12),
+ .flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP,
+ .iotype = UPIO_MEM,
+ .regshift = 1,
+ .uartclk = 3686400,
+ },
+ {
+ .mapbase = (unsigned long)(OMAP_CS1_PHYS + 0x50000),
+ .irq = OMAP_GPIO_IRQ(13),
+ .flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP,
+ .iotype = UPIO_MEM,
+ .regshift = 1,
+ .uartclk = 3686400,
+ },
+ {
+ .mapbase = (unsigned long)(OMAP_CS1_PHYS + 0x60000),
+ .irq = OMAP_GPIO_IRQ(14),
+ .flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP,
+ .iotype = UPIO_MEM,
+ .regshift = 1,
+ .uartclk = 3686400,
+ },
+ {
+ .mapbase = (unsigned long)(OMAP_CS1_PHYS + 0x70000),
+ .irq = OMAP_GPIO_IRQ(15),
+ .flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP,
+ .iotype = UPIO_MEM,
+ .regshift = 1,
+ .uartclk = 3686400,
+ },
+ { },
+};
+
+static struct platform_device serial_device = {
+ .name = "serial8250",
+ .id = 1,
+ .dev = {
+ .platform_data = voiceblue_ports,
+ },
+};
+
+static int __init ext_uart_init(void)
+{
+ return platform_device_register(&serial_device);
+}
+arch_initcall(ext_uart_init);
+
+static struct resource voiceblue_smc91x_resources[] = {
+ [0] = {
+ .start = OMAP_CS2_PHYS + 0x300,
+ .end = OMAP_CS2_PHYS + 0x300 + 16,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = OMAP_GPIO_IRQ(8),
+ .end = OMAP_GPIO_IRQ(8),
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device voiceblue_smc91x_device = {
+ .name = "smc91x",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(voiceblue_smc91x_resources),
+ .resource = voiceblue_smc91x_resources,
+};
+
+static struct platform_device *voiceblue_devices[] __initdata = {
+ &voiceblue_smc91x_device,
+};
+
+static struct omap_usb_config voiceblue_usb_config __initdata = {
+ .hmc_mode = 3,
+ .register_host = 1,
+ .register_dev = 1,
+ .pins[0] = 2,
+ .pins[1] = 6,
+ .pins[2] = 6,
+};
+
+static struct omap_board_config_kernel voiceblue_config[] = {
+ { OMAP_TAG_USB, &voiceblue_usb_config },
+};
+
+static void __init voiceblue_init_irq(void)
+{
+ omap_init_irq();
+ omap_gpio_init();
+}
+
+static void __init voiceblue_init(void)
+{
+ /* There is a good chance board is going up, so enable Power LED
+ * (it is connected through invertor) */
+ omap_writeb(0x00, OMAP_LPG1_LCR);
+ /* Watchdog */
+ omap_request_gpio(0);
+ /* smc91x reset */
+ omap_request_gpio(7);
+ omap_set_gpio_direction(7, 0);
+ omap_set_gpio_dataout(7, 1);
+ udelay(2); /* wait at least 100ns */
+ omap_set_gpio_dataout(7, 0);
+ mdelay(50); /* 50ms until PHY ready */
+ /* smc91x interrupt pin */
+ omap_request_gpio(8);
+ omap_set_gpio_edge_ctrl(8, OMAP_GPIO_RISING_EDGE);
+ /* 16C554 reset*/
+ omap_request_gpio(6);
+ omap_set_gpio_direction(6, 0);
+ omap_set_gpio_dataout(6, 0);
+ /* 16C554 interrupt pins */
+ omap_request_gpio(12);
+ omap_request_gpio(13);
+ omap_request_gpio(14);
+ omap_request_gpio(15);
+ omap_set_gpio_edge_ctrl(12, OMAP_GPIO_RISING_EDGE);
+ omap_set_gpio_edge_ctrl(13, OMAP_GPIO_RISING_EDGE);
+ omap_set_gpio_edge_ctrl(14, OMAP_GPIO_RISING_EDGE);
+ omap_set_gpio_edge_ctrl(15, OMAP_GPIO_RISING_EDGE);
+
+ platform_add_devices(voiceblue_devices, ARRAY_SIZE(voiceblue_devices));
+ omap_board_config = voiceblue_config;
+ omap_board_config_size = ARRAY_SIZE(voiceblue_config);
+}
+
+static int __initdata omap_serial_ports[OMAP_MAX_NR_PORTS] = {1, 1, 1};
+
+static void __init voiceblue_map_io(void)
+{
+ omap_map_common_io();
+ omap_serial_init(omap_serial_ports);
+}
+
+#define MACHINE_PANICED 1
+#define MACHINE_REBOOTING 2
+#define MACHINE_REBOOT 4
+static unsigned long machine_state;
+
+static int panic_event(struct notifier_block *this, unsigned long event,
+ void *ptr)
+{
+ if (test_and_set_bit(MACHINE_PANICED, &machine_state))
+ return NOTIFY_DONE;
+
+ /* Flash Power LED
+ * (TODO: Enable clock right way (enabled in bootloader already)) */
+ omap_writeb(0x78, OMAP_LPG1_LCR);
+
+ return NOTIFY_DONE;
+}
+
+static struct notifier_block panic_block = {
+ .notifier_call = panic_event,
+};
+
+static int __init setup_notifier(void)
+{
+ /* Setup panic notifier */
+ notifier_chain_register(&panic_notifier_list, &panic_block);
+
+ return 0;
+}
+
+postcore_initcall(setup_notifier);
+
+static int wdt_gpio_state;
+
+void voiceblue_wdt_enable(void)
+{
+ omap_set_gpio_direction(0, 0);
+ omap_set_gpio_dataout(0, 0);
+ omap_set_gpio_dataout(0, 1);
+ omap_set_gpio_dataout(0, 0);
+ wdt_gpio_state = 0;
+}
+
+void voiceblue_wdt_disable(void)
+{
+ omap_set_gpio_dataout(0, 0);
+ omap_set_gpio_dataout(0, 1);
+ omap_set_gpio_dataout(0, 0);
+ omap_set_gpio_direction(0, 1);
+}
+
+void voiceblue_wdt_ping(void)
+{
+ if (test_bit(MACHINE_REBOOT, &machine_state))
+ return;
+
+ wdt_gpio_state = !wdt_gpio_state;
+ omap_set_gpio_dataout(0, wdt_gpio_state);
+}
+
+void voiceblue_reset(void)
+{
+ set_bit(MACHINE_REBOOT, &machine_state);
+ voiceblue_wdt_enable();
+ while (1) ;
+}
+
+EXPORT_SYMBOL(voiceblue_wdt_enable);
+EXPORT_SYMBOL(voiceblue_wdt_disable);
+EXPORT_SYMBOL(voiceblue_wdt_ping);
+
+MACHINE_START(VOICEBLUE, "VoiceBlue OMAP5910")
+ /* Maintainer: Ladislav Michl <michl@2n.cz> */
+ .phys_ram = 0x10000000,
+ .phys_io = 0xfff00000,
+ .io_pg_offst = ((0xfef00000) >> 18) & 0xfffc,
+ .boot_params = 0x10000100,
+ .map_io = voiceblue_map_io,
+ .init_irq = voiceblue_init_irq,
+ .init_machine = voiceblue_init,
+ .timer = &omap_timer,
+MACHINE_END
diff --git a/arch/arm/mach-omap1/fpga.c b/arch/arm/mach-omap1/fpga.c
new file mode 100644
index 00000000000..7c08f6c2e1d
--- /dev/null
+++ b/arch/arm/mach-omap1/fpga.c
@@ -0,0 +1,188 @@
+/*
+ * linux/arch/arm/mach-omap/fpga.c
+ *
+ * Interrupt handler for OMAP-1510 Innovator FPGA
+ *
+ * Copyright (C) 2001 RidgeRun, Inc.
+ * Author: Greg Lonnon <glonnon@ridgerun.com>
+ *
+ * Copyright (C) 2002 MontaVista Software, Inc.
+ *
+ * Separated FPGA interrupts from innovator1510.c and cleaned up for 2.6
+ * Copyright (C) 2004 Nokia Corporation by Tony Lindrgen <tony@atomide.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/config.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/errno.h>
+
+#include <asm/hardware.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/mach/irq.h>
+
+#include <asm/arch/fpga.h>
+#include <asm/arch/gpio.h>
+
+static void fpga_mask_irq(unsigned int irq)
+{
+ irq -= OMAP1510_IH_FPGA_BASE;
+
+ if (irq < 8)
+ __raw_writeb((__raw_readb(OMAP1510_FPGA_IMR_LO)
+ & ~(1 << irq)), OMAP1510_FPGA_IMR_LO);
+ else if (irq < 16)
+ __raw_writeb((__raw_readb(OMAP1510_FPGA_IMR_HI)
+ & ~(1 << (irq - 8))), OMAP1510_FPGA_IMR_HI);
+ else
+ __raw_writeb((__raw_readb(INNOVATOR_FPGA_IMR2)
+ & ~(1 << (irq - 16))), INNOVATOR_FPGA_IMR2);
+}
+
+
+static inline u32 get_fpga_unmasked_irqs(void)
+{
+ return
+ ((__raw_readb(OMAP1510_FPGA_ISR_LO) &
+ __raw_readb(OMAP1510_FPGA_IMR_LO))) |
+ ((__raw_readb(OMAP1510_FPGA_ISR_HI) &
+ __raw_readb(OMAP1510_FPGA_IMR_HI)) << 8) |
+ ((__raw_readb(INNOVATOR_FPGA_ISR2) &
+ __raw_readb(INNOVATOR_FPGA_IMR2)) << 16);
+}
+
+
+static void fpga_ack_irq(unsigned int irq)
+{
+ /* Don't need to explicitly ACK FPGA interrupts */
+}
+
+static void fpga_unmask_irq(unsigned int irq)
+{
+ irq -= OMAP1510_IH_FPGA_BASE;
+
+ if (irq < 8)
+ __raw_writeb((__raw_readb(OMAP1510_FPGA_IMR_LO) | (1 << irq)),
+ OMAP1510_FPGA_IMR_LO);
+ else if (irq < 16)
+ __raw_writeb((__raw_readb(OMAP1510_FPGA_IMR_HI)
+ | (1 << (irq - 8))), OMAP1510_FPGA_IMR_HI);
+ else
+ __raw_writeb((__raw_readb(INNOVATOR_FPGA_IMR2)
+ | (1 << (irq - 16))), INNOVATOR_FPGA_IMR2);
+}
+
+static void fpga_mask_ack_irq(unsigned int irq)
+{
+ fpga_mask_irq(irq);
+ fpga_ack_irq(irq);
+}
+
+void innovator_fpga_IRQ_demux(unsigned int irq, struct irqdesc *desc,
+ struct pt_regs *regs)
+{
+ struct irqdesc *d;
+ u32 stat;
+ int fpga_irq;
+
+ stat = get_fpga_unmasked_irqs();
+
+ if (!stat)
+ return;
+
+ for (fpga_irq = OMAP1510_IH_FPGA_BASE;
+ (fpga_irq < (OMAP1510_IH_FPGA_BASE + NR_FPGA_IRQS)) && stat;
+ fpga_irq++, stat >>= 1) {
+ if (stat & 1) {
+ d = irq_desc + fpga_irq;
+ d->handle(fpga_irq, d, regs);
+ }
+ }
+}
+
+static struct irqchip omap_fpga_irq_ack = {
+ .ack = fpga_mask_ack_irq,
+ .mask = fpga_mask_irq,
+ .unmask = fpga_unmask_irq,
+};
+
+
+static struct irqchip omap_fpga_irq = {
+ .ack = fpga_ack_irq,
+ .mask = fpga_mask_irq,
+ .unmask = fpga_unmask_irq,
+};
+
+/*
+ * All of the FPGA interrupt request inputs except for the touchscreen are
+ * edge-sensitive; the touchscreen is level-sensitive. The edge-sensitive
+ * interrupts are acknowledged as a side-effect of reading the interrupt
+ * status register from the FPGA. The edge-sensitive interrupt inputs
+ * cause a problem with level interrupt requests, such as Ethernet. The
+ * problem occurs when a level interrupt request is asserted while its
+ * interrupt input is masked in the FPGA, which results in a missed
+ * interrupt.
+ *
+ * In an attempt to workaround the problem with missed interrupts, the
+ * mask_ack routine for all of the FPGA interrupts has been changed from
+ * fpga_mask_ack_irq() to fpga_ack_irq() so that the specific FPGA interrupt
+ * being serviced is left unmasked. We can do this because the FPGA cascade
+ * interrupt is installed with the SA_INTERRUPT flag, which leaves all
+ * interrupts masked at the CPU while an FPGA interrupt handler executes.
+ *
+ * Limited testing indicates that this workaround appears to be effective
+ * for the smc9194 Ethernet driver used on the Innovator. It should work
+ * on other FPGA interrupts as well, but any drivers that explicitly mask
+ * interrupts at the interrupt controller via disable_irq/enable_irq
+ * could pose a problem.
+ */
+void omap1510_fpga_init_irq(void)
+{
+ int i;
+
+ __raw_writeb(0, OMAP1510_FPGA_IMR_LO);
+ __raw_writeb(0, OMAP1510_FPGA_IMR_HI);
+ __raw_writeb(0, INNOVATOR_FPGA_IMR2);
+
+ for (i = OMAP1510_IH_FPGA_BASE; i < (OMAP1510_IH_FPGA_BASE + NR_FPGA_IRQS); i++) {
+
+ if (i == OMAP1510_INT_FPGA_TS) {
+ /*
+ * The touchscreen interrupt is level-sensitive, so
+ * we'll use the regular mask_ack routine for it.
+ */
+ set_irq_chip(i, &omap_fpga_irq_ack);
+ }
+ else {
+ /*
+ * All FPGA interrupts except the touchscreen are
+ * edge-sensitive, so we won't mask them.
+ */
+ set_irq_chip(i, &omap_fpga_irq);
+ }
+
+ set_irq_handler(i, do_edge_IRQ);
+ set_irq_flags(i, IRQF_VALID);
+ }
+
+ /*
+ * The FPGA interrupt line is connected to GPIO13. Claim this pin for
+ * the ARM.
+ *
+ * NOTE: For general GPIO/MPUIO access and interrupts, please see
+ * gpio.[ch]
+ */
+ omap_request_gpio(13);
+ omap_set_gpio_direction(13, 1);
+ omap_set_gpio_edge_ctrl(13, OMAP_GPIO_RISING_EDGE);
+ set_irq_chained_handler(OMAP1510_INT_FPGA, innovator_fpga_IRQ_demux);
+}
+
+EXPORT_SYMBOL(omap1510_fpga_init_irq);
diff --git a/arch/arm/mach-omap1/id.c b/arch/arm/mach-omap1/id.c
new file mode 100644
index 00000000000..986c3b7e09b
--- /dev/null
+++ b/arch/arm/mach-omap1/id.c
@@ -0,0 +1,188 @@
+/*
+ * linux/arch/arm/mach-omap1/id.c
+ *
+ * OMAP1 CPU identification code
+ *
+ * Copyright (C) 2004 Nokia Corporation
+ * Written by Tony Lindgren <tony@atomide.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+
+#include <asm/io.h>
+
+struct omap_id {
+ u16 jtag_id; /* Used to determine OMAP type */
+ u8 die_rev; /* Processor revision */
+ u32 omap_id; /* OMAP revision */
+ u32 type; /* Cpu id bits [31:08], cpu class bits [07:00] */
+};
+
+/* Register values to detect the OMAP version */
+static struct omap_id omap_ids[] __initdata = {
+ { .jtag_id = 0x355f, .die_rev = 0x0, .omap_id = 0x03320000, .type = 0x07300100},
+ { .jtag_id = 0xb55f, .die_rev = 0x0, .omap_id = 0x03320000, .type = 0x07300300},
+ { .jtag_id = 0xb470, .die_rev = 0x0, .omap_id = 0x03310100, .type = 0x15100000},
+ { .jtag_id = 0xb576, .die_rev = 0x0, .omap_id = 0x03320000, .type = 0x16100000},
+ { .jtag_id = 0xb576, .die_rev = 0x2, .omap_id = 0x03320100, .type = 0x16110000},
+ { .jtag_id = 0xb576, .die_rev = 0x3, .omap_id = 0x03320100, .type = 0x16100c00},
+ { .jtag_id = 0xb576, .die_rev = 0x0, .omap_id = 0x03320200, .type = 0x16100d00},
+ { .jtag_id = 0xb613, .die_rev = 0x0, .omap_id = 0x03320300, .type = 0x1610ef00},
+ { .jtag_id = 0xb613, .die_rev = 0x0, .omap_id = 0x03320300, .type = 0x1610ef00},
+ { .jtag_id = 0xb576, .die_rev = 0x1, .omap_id = 0x03320100, .type = 0x16110000},
+ { .jtag_id = 0xb58c, .die_rev = 0x2, .omap_id = 0x03320200, .type = 0x16110b00},
+ { .jtag_id = 0xb58c, .die_rev = 0x3, .omap_id = 0x03320200, .type = 0x16110c00},
+ { .jtag_id = 0xb65f, .die_rev = 0x0, .omap_id = 0x03320400, .type = 0x16212300},
+ { .jtag_id = 0xb65f, .die_rev = 0x1, .omap_id = 0x03320400, .type = 0x16212300},
+ { .jtag_id = 0xb65f, .die_rev = 0x1, .omap_id = 0x03320500, .type = 0x16212300},
+ { .jtag_id = 0xb5f7, .die_rev = 0x0, .omap_id = 0x03330000, .type = 0x17100000},
+ { .jtag_id = 0xb5f7, .die_rev = 0x1, .omap_id = 0x03330100, .type = 0x17100000},
+ { .jtag_id = 0xb5f7, .die_rev = 0x2, .omap_id = 0x03330100, .type = 0x17100000},
+};
+
+/*
+ * Get OMAP type from PROD_ID.
+ * 1710 has the PROD_ID in bits 15:00, not in 16:01 as documented in TRM.
+ * 1510 PROD_ID is empty, and 1610 PROD_ID does not make sense.
+ * Undocumented register in TEST BLOCK is used as fallback; This seems to
+ * work on 1510, 1610 & 1710. The official way hopefully will work in future
+ * processors.
+ */
+static u16 __init omap_get_jtag_id(void)
+{
+ u32 prod_id, omap_id;
+
+ prod_id = omap_readl(OMAP_PRODUCTION_ID_1);
+ omap_id = omap_readl(OMAP32_ID_1);
+
+ /* Check for unusable OMAP_PRODUCTION_ID_1 on 1611B/5912 and 730 */
+ if (((prod_id >> 20) == 0) || (prod_id == omap_id))
+ prod_id = 0;
+ else
+ prod_id &= 0xffff;
+
+ if (prod_id)
+ return prod_id;
+
+ /* Use OMAP32_ID_1 as fallback */
+ prod_id = ((omap_id >> 12) & 0xffff);
+
+ return prod_id;
+}
+
+/*
+ * Get OMAP revision from DIE_REV.
+ * Early 1710 processors may have broken OMAP_DIE_ID, it contains PROD_ID.
+ * Undocumented register in the TEST BLOCK is used as fallback.
+ * REVISIT: This does not seem to work on 1510
+ */
+static u8 __init omap_get_die_rev(void)
+{
+ u32 die_rev;
+
+ die_rev = omap_readl(OMAP_DIE_ID_1);
+
+ /* Check for broken OMAP_DIE_ID on early 1710 */
+ if (((die_rev >> 12) & 0xffff) == omap_get_jtag_id())
+ die_rev = 0;
+
+ die_rev = (die_rev >> 17) & 0xf;
+ if (die_rev)
+ return die_rev;
+
+ die_rev = (omap_readl(OMAP32_ID_1) >> 28) & 0xf;
+
+ return die_rev;
+}
+
+void __init omap_check_revision(void)
+{
+ int i;
+ u16 jtag_id;
+ u8 die_rev;
+ u32 omap_id;
+ u8 cpu_type;
+
+ jtag_id = omap_get_jtag_id();
+ die_rev = omap_get_die_rev();
+ omap_id = omap_readl(OMAP32_ID_0);
+
+#ifdef DEBUG
+ printk("OMAP_DIE_ID_0: 0x%08x\n", omap_readl(OMAP_DIE_ID_0));
+ printk("OMAP_DIE_ID_1: 0x%08x DIE_REV: %i\n",
+ omap_readl(OMAP_DIE_ID_1),
+ (omap_readl(OMAP_DIE_ID_1) >> 17) & 0xf);
+ printk("OMAP_PRODUCTION_ID_0: 0x%08x\n", omap_readl(OMAP_PRODUCTION_ID_0));
+ printk("OMAP_PRODUCTION_ID_1: 0x%08x JTAG_ID: 0x%04x\n",
+ omap_readl(OMAP_PRODUCTION_ID_1),
+ omap_readl(OMAP_PRODUCTION_ID_1) & 0xffff);
+ printk("OMAP32_ID_0: 0x%08x\n", omap_readl(OMAP32_ID_0));
+ printk("OMAP32_ID_1: 0x%08x\n", omap_readl(OMAP32_ID_1));
+ printk("JTAG_ID: 0x%04x DIE_REV: %i\n", jtag_id, die_rev);
+#endif
+
+ system_serial_high = omap_readl(OMAP_DIE_ID_0);
+ system_serial_low = omap_readl(OMAP_DIE_ID_1);
+
+ /* First check only the major version in a safe way */
+ for (i = 0; i < ARRAY_SIZE(omap_ids); i++) {
+ if (jtag_id == (omap_ids[i].jtag_id)) {
+ system_rev = omap_ids[i].type;
+ break;
+ }
+ }
+
+ /* Check if we can find the die revision */
+ for (i = 0; i < ARRAY_SIZE(omap_ids); i++) {
+ if (jtag_id == omap_ids[i].jtag_id && die_rev == omap_ids[i].die_rev) {
+ system_rev = omap_ids[i].type;
+ break;
+ }
+ }
+
+ /* Finally check also the omap_id */
+ for (i = 0; i < ARRAY_SIZE(omap_ids); i++) {
+ if (jtag_id == omap_ids[i].jtag_id
+ && die_rev == omap_ids[i].die_rev
+ && omap_id == omap_ids[i].omap_id) {
+ system_rev = omap_ids[i].type;
+ break;
+ }
+ }
+
+ /* Add the cpu class info (7xx, 15xx, 16xx, 24xx) */
+ cpu_type = system_rev >> 24;
+
+ switch (cpu_type) {
+ case 0x07:
+ system_rev |= 0x07;
+ break;
+ case 0x15:
+ system_rev |= 0x15;
+ break;
+ case 0x16:
+ case 0x17:
+ system_rev |= 0x16;
+ break;
+ case 0x24:
+ system_rev |= 0x24;
+ break;
+ default:
+ printk("Unknown OMAP cpu type: 0x%02x\n", cpu_type);
+ }
+
+ printk("OMAP%04x", system_rev >> 16);
+ if ((system_rev >> 8) & 0xff)
+ printk("%x", (system_rev >> 8) & 0xff);
+ printk(" revision %i handled as %02xxx id: %08x%08x\n",
+ die_rev, system_rev & 0xff, system_serial_low,
+ system_serial_high);
+}
+
diff --git a/arch/arm/mach-omap1/io.c b/arch/arm/mach-omap1/io.c
new file mode 100644
index 00000000000..207df0fe934
--- /dev/null
+++ b/arch/arm/mach-omap1/io.c
@@ -0,0 +1,115 @@
+/*
+ * linux/arch/arm/mach-omap1/io.c
+ *
+ * OMAP1 I/O mapping code
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+
+#include <asm/mach/map.h>
+#include <asm/io.h>
+#include <asm/arch/tc.h>
+
+extern int clk_init(void);
+extern void omap_check_revision(void);
+
+/*
+ * The machine specific code may provide the extra mapping besides the
+ * default mapping provided here.
+ */
+static struct map_desc omap_io_desc[] __initdata = {
+ { IO_VIRT, IO_PHYS, IO_SIZE, MT_DEVICE },
+};
+
+#ifdef CONFIG_ARCH_OMAP730
+static struct map_desc omap730_io_desc[] __initdata = {
+ { OMAP730_DSP_BASE, OMAP730_DSP_START, OMAP730_DSP_SIZE, MT_DEVICE },
+ { OMAP730_DSPREG_BASE, OMAP730_DSPREG_START, OMAP730_DSPREG_SIZE, MT_DEVICE },
+ { OMAP730_SRAM_BASE, OMAP730_SRAM_START, OMAP730_SRAM_SIZE, MT_DEVICE }
+};
+#endif
+
+#ifdef CONFIG_ARCH_OMAP1510
+static struct map_desc omap1510_io_desc[] __initdata = {
+ { OMAP1510_DSP_BASE, OMAP1510_DSP_START, OMAP1510_DSP_SIZE, MT_DEVICE },
+ { OMAP1510_DSPREG_BASE, OMAP1510_DSPREG_START, OMAP1510_DSPREG_SIZE, MT_DEVICE },
+ { OMAP1510_SRAM_BASE, OMAP1510_SRAM_START, OMAP1510_SRAM_SIZE, MT_DEVICE }
+};
+#endif
+
+#if defined(CONFIG_ARCH_OMAP16XX)
+static struct map_desc omap1610_io_desc[] __initdata = {
+ { OMAP16XX_DSP_BASE, OMAP16XX_DSP_START, OMAP16XX_DSP_SIZE, MT_DEVICE },
+ { OMAP16XX_DSPREG_BASE, OMAP16XX_DSPREG_START, OMAP16XX_DSPREG_SIZE, MT_DEVICE },
+ { OMAP16XX_SRAM_BASE, OMAP16XX_SRAM_START, OMAP1610_SRAM_SIZE, MT_DEVICE }
+};
+
+static struct map_desc omap5912_io_desc[] __initdata = {
+ { OMAP16XX_DSP_BASE, OMAP16XX_DSP_START, OMAP16XX_DSP_SIZE, MT_DEVICE },
+ { OMAP16XX_DSPREG_BASE, OMAP16XX_DSPREG_START, OMAP16XX_DSPREG_SIZE, MT_DEVICE },
+/*
+ * The OMAP5912 has 250kByte internal SRAM. Because the mapping is baseed on page
+ * size (4kByte), it seems that the last 2kByte (=0x800) of the 250kByte are not mapped.
+ * Add additional 2kByte (0x800) so that the last page is mapped and the last 2kByte
+ * can be used.
+ */
+ { OMAP16XX_SRAM_BASE, OMAP16XX_SRAM_START, OMAP5912_SRAM_SIZE + 0x800, MT_DEVICE }
+};
+#endif
+
+static int initialized = 0;
+
+static void __init _omap_map_io(void)
+{
+ initialized = 1;
+
+ /* We have to initialize the IO space mapping before we can run
+ * cpu_is_omapxxx() macros. */
+ iotable_init(omap_io_desc, ARRAY_SIZE(omap_io_desc));
+ omap_check_revision();
+
+#ifdef CONFIG_ARCH_OMAP730
+ if (cpu_is_omap730()) {
+ iotable_init(omap730_io_desc, ARRAY_SIZE(omap730_io_desc));
+ }
+#endif
+#ifdef CONFIG_ARCH_OMAP1510
+ if (cpu_is_omap1510()) {
+ iotable_init(omap1510_io_desc, ARRAY_SIZE(omap1510_io_desc));
+ }
+#endif
+#if defined(CONFIG_ARCH_OMAP16XX)
+ if (cpu_is_omap1610() || cpu_is_omap1710()) {
+ iotable_init(omap1610_io_desc, ARRAY_SIZE(omap1610_io_desc));
+ }
+ if (cpu_is_omap5912()) {
+ iotable_init(omap5912_io_desc, ARRAY_SIZE(omap5912_io_desc));
+ }
+#endif
+
+ /* REVISIT: Refer to OMAP5910 Errata, Advisory SYS_1: "Timeout Abort
+ * on a Posted Write in the TIPB Bridge".
+ */
+ omap_writew(0x0, MPU_PUBLIC_TIPB_CNTL);
+ omap_writew(0x0, MPU_PRIVATE_TIPB_CNTL);
+
+ /* Must init clocks early to assure that timer interrupt works
+ */
+ clk_init();
+}
+
+/*
+ * This should only get called from board specific init
+ */
+void omap_map_common_io(void)
+{
+ if (!initialized)
+ _omap_map_io();
+}
diff --git a/arch/arm/mach-omap1/irq.c b/arch/arm/mach-omap1/irq.c
new file mode 100644
index 00000000000..a11b6d80735
--- /dev/null
+++ b/arch/arm/mach-omap1/irq.c
@@ -0,0 +1,234 @@
+/*
+ * linux/arch/arm/mach-omap/irq.c
+ *
+ * Interrupt handler for all OMAP boards
+ *
+ * Copyright (C) 2004 Nokia Corporation
+ * Written by Tony Lindgren <tony@atomide.com>
+ * Major cleanups by Juha Yrjölä <juha.yrjola@nokia.com>
+ *
+ * Completely re-written to support various OMAP chips with bank specific
+ * interrupt handlers.
+ *
+ * Some snippets of the code taken from the older OMAP interrupt handler
+ * Copyright (C) 2001 RidgeRun, Inc. Greg Lonnon <glonnon@ridgerun.com>
+ *
+ * GPIO interrupt handler moved to gpio.c by Juha Yrjola
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/config.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+#include <linux/ptrace.h>
+
+#include <asm/hardware.h>
+#include <asm/irq.h>
+#include <asm/mach/irq.h>
+#include <asm/arch/gpio.h>
+
+#include <asm/io.h>
+
+#define IRQ_BANK(irq) ((irq) >> 5)
+#define IRQ_BIT(irq) ((irq) & 0x1f)
+
+struct omap_irq_bank {
+ unsigned long base_reg;
+ unsigned long trigger_map;
+ unsigned long wake_enable;
+};
+
+static unsigned int irq_bank_count = 0;
+static struct omap_irq_bank *irq_banks;
+
+static inline unsigned int irq_bank_readl(int bank, int offset)
+{
+ return omap_readl(irq_banks[bank].base_reg + offset);
+}
+
+static inline void irq_bank_writel(unsigned long value, int bank, int offset)
+{
+ omap_writel(value, irq_banks[bank].base_reg + offset);
+}
+
+static void omap_ack_irq(unsigned int irq)
+{
+ if (irq > 31)
+ omap_writel(0x1, OMAP_IH2_BASE + IRQ_CONTROL_REG_OFFSET);
+
+ omap_writel(0x1, OMAP_IH1_BASE + IRQ_CONTROL_REG_OFFSET);
+}
+
+static void omap_mask_irq(unsigned int irq)
+{
+ int bank = IRQ_BANK(irq);
+ u32 l;
+
+ l = omap_readl(irq_banks[bank].base_reg + IRQ_MIR_REG_OFFSET);
+ l |= 1 << IRQ_BIT(irq);
+ omap_writel(l, irq_banks[bank].base_reg + IRQ_MIR_REG_OFFSET);
+}
+
+static void omap_unmask_irq(unsigned int irq)
+{
+ int bank = IRQ_BANK(irq);
+ u32 l;
+
+ l = omap_readl(irq_banks[bank].base_reg + IRQ_MIR_REG_OFFSET);
+ l &= ~(1 << IRQ_BIT(irq));
+ omap_writel(l, irq_banks[bank].base_reg + IRQ_MIR_REG_OFFSET);
+}
+
+static void omap_mask_ack_irq(unsigned int irq)
+{
+ omap_mask_irq(irq);
+ omap_ack_irq(irq);
+}
+
+static int omap_wake_irq(unsigned int irq, unsigned int enable)
+{
+ int bank = IRQ_BANK(irq);
+
+ if (enable)
+ irq_banks[bank].wake_enable |= IRQ_BIT(irq);
+ else
+ irq_banks[bank].wake_enable &= ~IRQ_BIT(irq);
+
+ return 0;
+}
+
+
+/*
+ * Allows tuning the IRQ type and priority
+ *
+ * NOTE: There is currently no OMAP fiq handler for Linux. Read the
+ * mailing list threads on FIQ handlers if you are planning to
+ * add a FIQ handler for OMAP.
+ */
+static void omap_irq_set_cfg(int irq, int fiq, int priority, int trigger)
+{
+ signed int bank;
+ unsigned long val, offset;
+
+ bank = IRQ_BANK(irq);
+ /* FIQ is only available on bank 0 interrupts */
+ fiq = bank ? 0 : (fiq & 0x1);
+ val = fiq | ((priority & 0x1f) << 2) | ((trigger & 0x1) << 1);
+ offset = IRQ_ILR0_REG_OFFSET + IRQ_BIT(irq) * 0x4;
+ irq_bank_writel(val, bank, offset);
+}
+
+#ifdef CONFIG_ARCH_OMAP730
+static struct omap_irq_bank omap730_irq_banks[] = {
+ { .base_reg = OMAP_IH1_BASE, .trigger_map = 0xb3f8e22f },
+ { .base_reg = OMAP_IH2_BASE, .trigger_map = 0xfdb9c1f2 },
+ { .base_reg = OMAP_IH2_BASE + 0x100, .trigger_map = 0x800040f3 },
+};
+#endif
+
+#ifdef CONFIG_ARCH_OMAP1510
+static struct omap_irq_bank omap1510_irq_banks[] = {
+ { .base_reg = OMAP_IH1_BASE, .trigger_map = 0xb3febfff },
+ { .base_reg = OMAP_IH2_BASE, .trigger_map = 0xffbfffed },
+};
+#endif
+
+#if defined(CONFIG_ARCH_OMAP16XX)
+
+static struct omap_irq_bank omap1610_irq_banks[] = {
+ { .base_reg = OMAP_IH1_BASE, .trigger_map = 0xb3fefe8f },
+ { .base_reg = OMAP_IH2_BASE, .trigger_map = 0xfdb7c1fd },
+ { .base_reg = OMAP_IH2_BASE + 0x100, .trigger_map = 0xffffb7ff },
+ { .base_reg = OMAP_IH2_BASE + 0x200, .trigger_map = 0xffffffff },
+};
+#endif
+
+static struct irqchip omap_irq_chip = {
+ .ack = omap_mask_ack_irq,
+ .mask = omap_mask_irq,
+ .unmask = omap_unmask_irq,
+ .wake = omap_wake_irq,
+};
+
+void __init omap_init_irq(void)
+{
+ int i, j;
+
+#ifdef CONFIG_ARCH_OMAP730
+ if (cpu_is_omap730()) {
+ irq_banks = omap730_irq_banks;
+ irq_bank_count = ARRAY_SIZE(omap730_irq_banks);
+ }
+#endif
+#ifdef CONFIG_ARCH_OMAP1510
+ if (cpu_is_omap1510()) {
+ irq_banks = omap1510_irq_banks;
+ irq_bank_count = ARRAY_SIZE(omap1510_irq_banks);
+ }
+#endif
+#if defined(CONFIG_ARCH_OMAP16XX)
+ if (cpu_is_omap16xx()) {
+ irq_banks = omap1610_irq_banks;
+ irq_bank_count = ARRAY_SIZE(omap1610_irq_banks);
+ }
+#endif
+ printk("Total of %i interrupts in %i interrupt banks\n",
+ irq_bank_count * 32, irq_bank_count);
+
+ /* Mask and clear all interrupts */
+ for (i = 0; i < irq_bank_count; i++) {
+ irq_bank_writel(~0x0, i, IRQ_MIR_REG_OFFSET);
+ irq_bank_writel(0x0, i, IRQ_ITR_REG_OFFSET);
+ }
+
+ /* Clear any pending interrupts */
+ irq_bank_writel(0x03, 0, IRQ_CONTROL_REG_OFFSET);
+ irq_bank_writel(0x03, 1, IRQ_CONTROL_REG_OFFSET);
+
+ /* Enable interrupts in global mask */
+ if (cpu_is_omap730()) {
+ irq_bank_writel(0x0, 0, IRQ_GMR_REG_OFFSET);
+ }
+
+ /* Install the interrupt handlers for each bank */
+ for (i = 0; i < irq_bank_count; i++) {
+ for (j = i * 32; j < (i + 1) * 32; j++) {
+ int irq_trigger;
+
+ irq_trigger = irq_banks[i].trigger_map >> IRQ_BIT(j);
+ omap_irq_set_cfg(j, 0, 0, irq_trigger);
+
+ set_irq_chip(j, &omap_irq_chip);
+ set_irq_handler(j, do_level_IRQ);
+ set_irq_flags(j, IRQF_VALID);
+ }
+ }
+
+ /* Unmask level 2 handler */
+ if (cpu_is_omap730()) {
+ omap_unmask_irq(INT_730_IH2_IRQ);
+ } else {
+ omap_unmask_irq(INT_IH2_IRQ);
+ }
+}
diff --git a/arch/arm/mach-omap1/leds-h2p2-debug.c b/arch/arm/mach-omap1/leds-h2p2-debug.c
new file mode 100644
index 00000000000..6e98290cca5
--- /dev/null
+++ b/arch/arm/mach-omap1/leds-h2p2-debug.c
@@ -0,0 +1,144 @@
+/*
+ * linux/arch/arm/mach-omap/leds-h2p2-debug.c
+ *
+ * Copyright 2003 by Texas Instruments Incorporated
+ *
+ * There are 16 LEDs on the debug board (all green); four may be used
+ * for logical 'green', 'amber', 'red', and 'blue' (after "claiming").
+ *
+ * The "surfer" expansion board and H2 sample board also have two-color
+ * green+red LEDs (in parallel), used here for timer and idle indicators.
+ */
+#include <linux/config.h>
+#include <linux/init.h>
+#include <linux/kernel_stat.h>
+#include <linux/sched.h>
+#include <linux/version.h>
+
+#include <asm/io.h>
+#include <asm/hardware.h>
+#include <asm/leds.h>
+#include <asm/system.h>
+
+#include <asm/arch/fpga.h>
+#include <asm/arch/gpio.h>
+
+#include "leds.h"
+
+
+#define GPIO_LED_RED 3
+#define GPIO_LED_GREEN OMAP_MPUIO(4)
+
+
+#define LED_STATE_ENABLED 0x01
+#define LED_STATE_CLAIMED 0x02
+#define LED_TIMER_ON 0x04
+
+#define GPIO_IDLE GPIO_LED_GREEN
+#define GPIO_TIMER GPIO_LED_RED
+
+
+void h2p2_dbg_leds_event(led_event_t evt)
+{
+ unsigned long flags;
+
+ static struct h2p2_dbg_fpga __iomem *fpga;
+ static u16 led_state, hw_led_state;
+
+ local_irq_save(flags);
+
+ if (!(led_state & LED_STATE_ENABLED) && evt != led_start)
+ goto done;
+
+ switch (evt) {
+ case led_start:
+ if (!fpga)
+ fpga = ioremap(H2P2_DBG_FPGA_START,
+ H2P2_DBG_FPGA_SIZE);
+ if (fpga) {
+ led_state |= LED_STATE_ENABLED;
+ __raw_writew(~0, &fpga->leds);
+ }
+ break;
+
+ case led_stop:
+ case led_halted:
+ /* all leds off during suspend or shutdown */
+ omap_set_gpio_dataout(GPIO_TIMER, 0);
+ omap_set_gpio_dataout(GPIO_IDLE, 0);
+ __raw_writew(~0, &fpga->leds);
+ led_state &= ~LED_STATE_ENABLED;
+ if (evt == led_halted) {
+ iounmap(fpga);
+ fpga = NULL;
+ }
+ goto done;
+
+ case led_claim:
+ led_state |= LED_STATE_CLAIMED;
+ hw_led_state = 0;
+ break;
+
+ case led_release:
+ led_state &= ~LED_STATE_CLAIMED;
+ break;
+
+#ifdef CONFIG_LEDS_TIMER
+ case led_timer:
+ led_state ^= LED_TIMER_ON;
+ omap_set_gpio_dataout(GPIO_TIMER, led_state & LED_TIMER_ON);
+ goto done;
+#endif
+
+#ifdef CONFIG_LEDS_CPU
+ case led_idle_start:
+ omap_set_gpio_dataout(GPIO_IDLE, 1);
+ goto done;
+
+ case led_idle_end:
+ omap_set_gpio_dataout(GPIO_IDLE, 0);
+ goto done;
+#endif
+
+ case led_green_on:
+ hw_led_state |= H2P2_DBG_FPGA_LED_GREEN;
+ break;
+ case led_green_off:
+ hw_led_state &= ~H2P2_DBG_FPGA_LED_GREEN;
+ break;
+
+ case led_amber_on:
+ hw_led_state |= H2P2_DBG_FPGA_LED_AMBER;
+ break;
+ case led_amber_off:
+ hw_led_state &= ~H2P2_DBG_FPGA_LED_AMBER;
+ break;
+
+ case led_red_on:
+ hw_led_state |= H2P2_DBG_FPGA_LED_RED;
+ break;
+ case led_red_off:
+ hw_led_state &= ~H2P2_DBG_FPGA_LED_RED;
+ break;
+
+ case led_blue_on:
+ hw_led_state |= H2P2_DBG_FPGA_LED_BLUE;
+ break;
+ case led_blue_off:
+ hw_led_state &= ~H2P2_DBG_FPGA_LED_BLUE;
+ break;
+
+ default:
+ break;
+ }
+
+
+ /*
+ * Actually burn the LEDs
+ */
+ if (led_state & LED_STATE_CLAIMED)
+ __raw_writew(~hw_led_state, &fpga->leds);
+
+done:
+ local_irq_restore(flags);
+}
diff --git a/arch/arm/mach-omap1/leds-innovator.c b/arch/arm/mach-omap1/leds-innovator.c
new file mode 100644
index 00000000000..8043b7d0f66
--- /dev/null
+++ b/arch/arm/mach-omap1/leds-innovator.c
@@ -0,0 +1,103 @@
+/*
+ * linux/arch/arm/mach-omap/leds-innovator.c
+ */
+#include <linux/config.h>
+#include <linux/init.h>
+
+#include <asm/hardware.h>
+#include <asm/leds.h>
+#include <asm/system.h>
+
+#include "leds.h"
+
+
+#define LED_STATE_ENABLED 1
+#define LED_STATE_CLAIMED 2
+
+static unsigned int led_state;
+static unsigned int hw_led_state;
+
+void innovator_leds_event(led_event_t evt)
+{
+ unsigned long flags;
+
+ local_irq_save(flags);
+
+ switch (evt) {
+ case led_start:
+ hw_led_state = 0;
+ led_state = LED_STATE_ENABLED;
+ break;
+
+ case led_stop:
+ led_state &= ~LED_STATE_ENABLED;
+ hw_led_state = 0;
+ break;
+
+ case led_claim:
+ led_state |= LED_STATE_CLAIMED;
+ hw_led_state = 0;
+ break;
+
+ case led_release:
+ led_state &= ~LED_STATE_CLAIMED;
+ hw_led_state = 0;
+ break;
+
+#ifdef CONFIG_LEDS_TIMER
+ case led_timer:
+ if (!(led_state & LED_STATE_CLAIMED))
+ hw_led_state ^= 0;
+ break;
+#endif
+
+#ifdef CONFIG_LEDS_CPU
+ case led_idle_start:
+ if (!(led_state & LED_STATE_CLAIMED))
+ hw_led_state |= 0;
+ break;
+
+ case led_idle_end:
+ if (!(led_state & LED_STATE_CLAIMED))
+ hw_led_state &= ~0;
+ break;
+#endif
+
+ case led_halted:
+ break;
+
+ case led_green_on:
+ if (led_state & LED_STATE_CLAIMED)
+ hw_led_state &= ~0;
+ break;
+
+ case led_green_off:
+ if (led_state & LED_STATE_CLAIMED)
+ hw_led_state |= 0;
+ break;
+
+ case led_amber_on:
+ break;
+
+ case led_amber_off:
+ break;
+
+ case led_red_on:
+ if (led_state & LED_STATE_CLAIMED)
+ hw_led_state &= ~0;
+ break;
+
+ case led_red_off:
+ if (led_state & LED_STATE_CLAIMED)
+ hw_led_state |= 0;
+ break;
+
+ default:
+ break;
+ }
+
+ if (led_state & LED_STATE_ENABLED)
+ ;
+
+ local_irq_restore(flags);
+}
diff --git a/arch/arm/mach-omap1/leds-osk.c b/arch/arm/mach-omap1/leds-osk.c
new file mode 100644
index 00000000000..4a0e8b9d4fc
--- /dev/null
+++ b/arch/arm/mach-omap1/leds-osk.c
@@ -0,0 +1,194 @@
+/*
+ * linux/arch/arm/mach-omap/leds-osk.c
+ *
+ * LED driver for OSK, and optionally Mistral QVGA, boards
+ */
+#include <linux/config.h>
+#include <linux/init.h>
+#include <linux/workqueue.h>
+
+#include <asm/hardware.h>
+#include <asm/leds.h>
+#include <asm/system.h>
+
+#include <asm/arch/gpio.h>
+#include <asm/arch/tps65010.h>
+
+#include "leds.h"
+
+
+#define LED_STATE_ENABLED (1 << 0)
+#define LED_STATE_CLAIMED (1 << 1)
+static u8 led_state;
+
+#define GREEN_LED (1 << 0) /* TPS65010 LED1 */
+#define AMBER_LED (1 << 1) /* TPS65010 LED2 */
+#define RED_LED (1 << 2) /* TPS65010 GPIO2 */
+#define TIMER_LED (1 << 3) /* Mistral board */
+#define IDLE_LED (1 << 4) /* Mistral board */
+static u8 hw_led_state;
+
+
+/* TPS65010 leds are changed using i2c -- from a task context.
+ * Using one of these for the "idle" LED would be impractical...
+ */
+#define TPS_LEDS (GREEN_LED | RED_LED | AMBER_LED)
+
+static u8 tps_leds_change;
+
+static void tps_work(void *unused)
+{
+ for (;;) {
+ u8 leds;
+
+ local_irq_disable();
+ leds = tps_leds_change;
+ tps_leds_change = 0;
+ local_irq_enable();
+
+ if (!leds)
+ break;
+
+ /* careful: the set_led() value is on/off/blink */
+ if (leds & GREEN_LED)
+ tps65010_set_led(LED1, !!(hw_led_state & GREEN_LED));
+ if (leds & AMBER_LED)
+ tps65010_set_led(LED2, !!(hw_led_state & AMBER_LED));
+
+ /* the gpio led doesn't have that issue */
+ if (leds & RED_LED)
+ tps65010_set_gpio_out_value(GPIO2,
+ !(hw_led_state & RED_LED));
+ }
+}
+
+static DECLARE_WORK(work, tps_work, NULL);
+
+#ifdef CONFIG_FB_OMAP
+
+/* For now, all system indicators require the Mistral board, since that
+ * LED can be manipulated without a task context. This LED is either red,
+ * or green, but not both; it can't give the full "disco led" effect.
+ */
+
+#define GPIO_LED_RED 3
+#define GPIO_LED_GREEN OMAP_MPUIO(4)
+
+static void mistral_setled(void)
+{
+ int red = 0;
+ int green = 0;
+
+ if (hw_led_state & TIMER_LED)
+ red = 1;
+ else if (hw_led_state & IDLE_LED)
+ green = 1;
+ // else both sides are disabled
+
+ omap_set_gpio_dataout(GPIO_LED_GREEN, green);
+ omap_set_gpio_dataout(GPIO_LED_RED, red);
+}
+
+#endif
+
+void osk_leds_event(led_event_t evt)
+{
+ unsigned long flags;
+ u16 leds;
+
+ local_irq_save(flags);
+
+ if (!(led_state & LED_STATE_ENABLED) && evt != led_start)
+ goto done;
+
+ leds = hw_led_state;
+ switch (evt) {
+ case led_start:
+ led_state |= LED_STATE_ENABLED;
+ hw_led_state = 0;
+ leds = ~0;
+ break;
+
+ case led_halted:
+ case led_stop:
+ led_state &= ~LED_STATE_ENABLED;
+ hw_led_state = 0;
+ // NOTE: work may still be pending!!
+ break;
+
+ case led_claim:
+ led_state |= LED_STATE_CLAIMED;
+ hw_led_state = 0;
+ leds = ~0;
+ break;
+
+ case led_release:
+ led_state &= ~LED_STATE_CLAIMED;
+ hw_led_state = 0;
+ break;
+
+#ifdef CONFIG_FB_OMAP
+
+ case led_timer:
+ hw_led_state ^= TIMER_LED;
+ mistral_setled();
+ break;
+
+ case led_idle_start:
+ hw_led_state |= IDLE_LED;
+ mistral_setled();
+ break;
+
+ case led_idle_end:
+ hw_led_state &= ~IDLE_LED;
+ mistral_setled();
+ break;
+
+#endif /* CONFIG_FB_OMAP */
+
+ /* "green" == tps LED1 (leftmost, normally power-good)
+ * works only with DC adapter, not on battery power!
+ */
+ case led_green_on:
+ if (led_state & LED_STATE_CLAIMED)
+ hw_led_state |= GREEN_LED;
+ break;
+ case led_green_off:
+ if (led_state & LED_STATE_CLAIMED)
+ hw_led_state &= ~GREEN_LED;
+ break;
+
+ /* "amber" == tps LED2 (middle) */
+ case led_amber_on:
+ if (led_state & LED_STATE_CLAIMED)
+ hw_led_state |= AMBER_LED;
+ break;
+ case led_amber_off:
+ if (led_state & LED_STATE_CLAIMED)
+ hw_led_state &= ~AMBER_LED;
+ break;
+
+ /* "red" == LED on tps gpio3 (rightmost) */
+ case led_red_on:
+ if (led_state & LED_STATE_CLAIMED)
+ hw_led_state |= RED_LED;
+ break;
+ case led_red_off:
+ if (led_state & LED_STATE_CLAIMED)
+ hw_led_state &= ~RED_LED;
+ break;
+
+ default:
+ break;
+ }
+
+ leds ^= hw_led_state;
+ leds &= TPS_LEDS;
+ if (leds && (led_state & LED_STATE_CLAIMED)) {
+ tps_leds_change |= leds;
+ schedule_work(&work);
+ }
+
+done:
+ local_irq_restore(flags);
+}
diff --git a/arch/arm/mach-omap1/leds.c b/arch/arm/mach-omap1/leds.c
new file mode 100644
index 00000000000..8ab21fe98e1
--- /dev/null
+++ b/arch/arm/mach-omap1/leds.c
@@ -0,0 +1,61 @@
+/*
+ * linux/arch/arm/mach-omap/leds.c
+ *
+ * OMAP LEDs dispatcher
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+
+#include <asm/leds.h>
+#include <asm/mach-types.h>
+
+#include <asm/arch/gpio.h>
+#include <asm/arch/mux.h>
+
+#include "leds.h"
+
+static int __init
+omap_leds_init(void)
+{
+ if (machine_is_omap_innovator())
+ leds_event = innovator_leds_event;
+
+ else if (machine_is_omap_h2() || machine_is_omap_perseus2())
+ leds_event = h2p2_dbg_leds_event;
+
+ else if (machine_is_omap_osk())
+ leds_event = osk_leds_event;
+
+ else
+ return -1;
+
+ if (machine_is_omap_h2()
+ || machine_is_omap_perseus2()
+ || machine_is_omap_osk()) {
+
+ /* LED1/LED2 pins can be used as GPIO (as done here), or by
+ * the LPG (works even in deep sleep!), to drive a bicolor
+ * LED on the H2 sample board, and another on the H2/P2
+ * "surfer" expansion board.
+ *
+ * The same pins drive a LED on the OSK Mistral board, but
+ * that's a different kind of LED (just one color at a time).
+ */
+ omap_cfg_reg(P18_1610_GPIO3);
+ if (omap_request_gpio(3) == 0)
+ omap_set_gpio_direction(3, 0);
+ else
+ printk(KERN_WARNING "LED: can't get GPIO3/red?\n");
+
+ omap_cfg_reg(MPUIO4);
+ if (omap_request_gpio(OMAP_MPUIO(4)) == 0)
+ omap_set_gpio_direction(OMAP_MPUIO(4), 0);
+ else
+ printk(KERN_WARNING "LED: can't get MPUIO4/green?\n");
+ }
+
+ leds_event(led_start);
+ return 0;
+}
+
+__initcall(omap_leds_init);
diff --git a/arch/arm/mach-omap1/leds.h b/arch/arm/mach-omap1/leds.h
new file mode 100644
index 00000000000..a1e9fedc376
--- /dev/null
+++ b/arch/arm/mach-omap1/leds.h
@@ -0,0 +1,3 @@
+extern void innovator_leds_event(led_event_t evt);
+extern void h2p2_dbg_leds_event(led_event_t evt);
+extern void osk_leds_event(led_event_t evt);
diff --git a/arch/arm/mach-omap1/serial.c b/arch/arm/mach-omap1/serial.c
new file mode 100644
index 00000000000..214e5d17c8b
--- /dev/null
+++ b/arch/arm/mach-omap1/serial.c
@@ -0,0 +1,200 @@
+/*
+ * linux/arch/arm/mach-omap1/id.c
+ *
+ * OMAP1 CPU identification code
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/serial.h>
+#include <linux/tty.h>
+#include <linux/serial_8250.h>
+#include <linux/serial_reg.h>
+
+#include <asm/io.h>
+#include <asm/mach-types.h>
+#include <asm/hardware/clock.h>
+
+#include <asm/arch/board.h>
+#include <asm/arch/mux.h>
+#include <asm/arch/fpga.h>
+
+static struct clk * uart1_ck = NULL;
+static struct clk * uart2_ck = NULL;
+static struct clk * uart3_ck = NULL;
+
+static inline unsigned int omap_serial_in(struct plat_serial8250_port *up,
+ int offset)
+{
+ offset <<= up->regshift;
+ return (unsigned int)__raw_readb(up->membase + offset);
+}
+
+static inline void omap_serial_outp(struct plat_serial8250_port *p, int offset,
+ int value)
+{
+ offset <<= p->regshift;
+ __raw_writeb(value, p->membase + offset);
+}
+
+/*
+ * Internal UARTs need to be initialized for the 8250 autoconfig to work
+ * properly. Note that the TX watermark initialization may not be needed
+ * once the 8250.c watermark handling code is merged.
+ */
+static void __init omap_serial_reset(struct plat_serial8250_port *p)
+{
+ omap_serial_outp(p, UART_OMAP_MDR1, 0x07); /* disable UART */
+ omap_serial_outp(p, UART_OMAP_SCR, 0x08); /* TX watermark */
+ omap_serial_outp(p, UART_OMAP_MDR1, 0x00); /* enable UART */
+
+ if (!cpu_is_omap1510()) {
+ omap_serial_outp(p, UART_OMAP_SYSC, 0x01);
+ while (!(omap_serial_in(p, UART_OMAP_SYSC) & 0x01));
+ }
+}
+
+static struct plat_serial8250_port serial_platform_data[] = {
+ {
+ .membase = (char*)IO_ADDRESS(OMAP_UART1_BASE),
+ .mapbase = (unsigned long)OMAP_UART1_BASE,
+ .irq = INT_UART1,
+ .flags = UPF_BOOT_AUTOCONF,
+ .iotype = UPIO_MEM,
+ .regshift = 2,
+ .uartclk = OMAP16XX_BASE_BAUD * 16,
+ },
+ {
+ .membase = (char*)IO_ADDRESS(OMAP_UART2_BASE),
+ .mapbase = (unsigned long)OMAP_UART2_BASE,
+ .irq = INT_UART2,
+ .flags = UPF_BOOT_AUTOCONF,
+ .iotype = UPIO_MEM,
+ .regshift = 2,
+ .uartclk = OMAP16XX_BASE_BAUD * 16,
+ },
+ {
+ .membase = (char*)IO_ADDRESS(OMAP_UART3_BASE),
+ .mapbase = (unsigned long)OMAP_UART3_BASE,
+ .irq = INT_UART3,
+ .flags = UPF_BOOT_AUTOCONF,
+ .iotype = UPIO_MEM,
+ .regshift = 2,
+ .uartclk = OMAP16XX_BASE_BAUD * 16,
+ },
+ { },
+};
+
+static struct platform_device serial_device = {
+ .name = "serial8250",
+ .id = 0,
+ .dev = {
+ .platform_data = serial_platform_data,
+ },
+};
+
+/*
+ * Note that on Innovator-1510 UART2 pins conflict with USB2.
+ * By default UART2 does not work on Innovator-1510 if you have
+ * USB OHCI enabled. To use UART2, you must disable USB2 first.
+ */
+void __init omap_serial_init(int ports[OMAP_MAX_NR_PORTS])
+{
+ int i;
+
+ if (cpu_is_omap730()) {
+ serial_platform_data[0].regshift = 0;
+ serial_platform_data[1].regshift = 0;
+ serial_platform_data[0].irq = INT_730_UART_MODEM_1;
+ serial_platform_data[1].irq = INT_730_UART_MODEM_IRDA_2;
+ }
+
+ if (cpu_is_omap1510()) {
+ serial_platform_data[0].uartclk = OMAP1510_BASE_BAUD * 16;
+ serial_platform_data[1].uartclk = OMAP1510_BASE_BAUD * 16;
+ serial_platform_data[2].uartclk = OMAP1510_BASE_BAUD * 16;
+ }
+
+ for (i = 0; i < OMAP_MAX_NR_PORTS; i++) {
+ unsigned char reg;
+
+ if (ports[i] == 0) {
+ serial_platform_data[i].membase = NULL;
+ serial_platform_data[i].mapbase = 0;
+ continue;
+ }
+
+ switch (i) {
+ case 0:
+ uart1_ck = clk_get(NULL, "uart1_ck");
+ if (IS_ERR(uart1_ck))
+ printk("Could not get uart1_ck\n");
+ else {
+ clk_use(uart1_ck);
+ if (cpu_is_omap1510())
+ clk_set_rate(uart1_ck, 12000000);
+ }
+ if (cpu_is_omap1510()) {
+ omap_cfg_reg(UART1_TX);
+ omap_cfg_reg(UART1_RTS);
+ if (machine_is_omap_innovator()) {
+ reg = fpga_read(OMAP1510_FPGA_POWER);
+ reg |= OMAP1510_FPGA_PCR_COM1_EN;
+ fpga_write(reg, OMAP1510_FPGA_POWER);
+ udelay(10);
+ }
+ }
+ break;
+ case 1:
+ uart2_ck = clk_get(NULL, "uart2_ck");
+ if (IS_ERR(uart2_ck))
+ printk("Could not get uart2_ck\n");
+ else {
+ clk_use(uart2_ck);
+ if (cpu_is_omap1510())
+ clk_set_rate(uart2_ck, 12000000);
+ else
+ clk_set_rate(uart2_ck, 48000000);
+ }
+ if (cpu_is_omap1510()) {
+ omap_cfg_reg(UART2_TX);
+ omap_cfg_reg(UART2_RTS);
+ if (machine_is_omap_innovator()) {
+ reg = fpga_read(OMAP1510_FPGA_POWER);
+ reg |= OMAP1510_FPGA_PCR_COM2_EN;
+ fpga_write(reg, OMAP1510_FPGA_POWER);
+ udelay(10);
+ }
+ }
+ break;
+ case 2:
+ uart3_ck = clk_get(NULL, "uart3_ck");
+ if (IS_ERR(uart3_ck))
+ printk("Could not get uart3_ck\n");
+ else {
+ clk_use(uart3_ck);
+ if (cpu_is_omap1510())
+ clk_set_rate(uart3_ck, 12000000);
+ }
+ if (cpu_is_omap1510()) {
+ omap_cfg_reg(UART3_TX);
+ omap_cfg_reg(UART3_RX);
+ }
+ break;
+ }
+ omap_serial_reset(&serial_platform_data[i]);
+ }
+}
+
+static int __init omap_init(void)
+{
+ return platform_device_register(&serial_device);
+}
+arch_initcall(omap_init);
diff --git a/arch/arm/mach-omap1/time.c b/arch/arm/mach-omap1/time.c
new file mode 100644
index 00000000000..d540539c9bb
--- /dev/null
+++ b/arch/arm/mach-omap1/time.c
@@ -0,0 +1,436 @@
+/*
+ * linux/arch/arm/mach-omap1/time.c
+ *
+ * OMAP Timers
+ *
+ * Copyright (C) 2004 Nokia Corporation
+ * Partial timer rewrite and additional dynamic tick timer support by
+ * Tony Lindgen <tony@atomide.com> and
+ * Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com>
+ *
+ * MPU timer code based on the older MPU timer code for OMAP
+ * Copyright (C) 2000 RidgeRun, Inc.
+ * Author: Greg Lonnon <glonnon@ridgerun.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/sched.h>
+#include <linux/spinlock.h>
+
+#include <asm/system.h>
+#include <asm/hardware.h>
+#include <asm/io.h>
+#include <asm/leds.h>
+#include <asm/irq.h>
+#include <asm/mach/irq.h>
+#include <asm/mach/time.h>
+
+struct sys_timer omap_timer;
+
+#ifdef CONFIG_OMAP_MPU_TIMER
+
+/*
+ * ---------------------------------------------------------------------------
+ * MPU timer
+ * ---------------------------------------------------------------------------
+ */
+#define OMAP_MPU_TIMER_BASE OMAP_MPU_TIMER1_BASE
+#define OMAP_MPU_TIMER_OFFSET 0x100
+
+/* cycles to nsec conversions taken from arch/i386/kernel/timers/timer_tsc.c,
+ * converted to use kHz by Kevin Hilman */
+/* convert from cycles(64bits) => nanoseconds (64bits)
+ * basic equation:
+ * ns = cycles / (freq / ns_per_sec)
+ * ns = cycles * (ns_per_sec / freq)
+ * ns = cycles * (10^9 / (cpu_khz * 10^3))
+ * ns = cycles * (10^6 / cpu_khz)
+ *
+ * Then we use scaling math (suggested by george at mvista.com) to get:
+ * ns = cycles * (10^6 * SC / cpu_khz / SC
+ * ns = cycles * cyc2ns_scale / SC
+ *
+ * And since SC is a constant power of two, we can convert the div
+ * into a shift.
+ * -johnstul at us.ibm.com "math is hard, lets go shopping!"
+ */
+static unsigned long cyc2ns_scale;
+#define CYC2NS_SCALE_FACTOR 10 /* 2^10, carefully chosen */
+
+static inline void set_cyc2ns_scale(unsigned long cpu_khz)
+{
+ cyc2ns_scale = (1000000 << CYC2NS_SCALE_FACTOR)/cpu_khz;
+}
+
+static inline unsigned long long cycles_2_ns(unsigned long long cyc)
+{
+ return (cyc * cyc2ns_scale) >> CYC2NS_SCALE_FACTOR;
+}
+
+/*
+ * MPU_TICKS_PER_SEC must be an even number, otherwise machinecycles_to_usecs
+ * will break. On P2, the timer count rate is 6.5 MHz after programming PTV
+ * with 0. This divides the 13MHz input by 2, and is undocumented.
+ */
+#ifdef CONFIG_MACH_OMAP_PERSEUS2
+/* REVISIT: This ifdef construct should be replaced by a query to clock
+ * framework to see if timer base frequency is 12.0, 13.0 or 19.2 MHz.
+ */
+#define MPU_TICKS_PER_SEC (13000000 / 2)
+#else
+#define MPU_TICKS_PER_SEC (12000000 / 2)
+#endif
+
+#define MPU_TIMER_TICK_PERIOD ((MPU_TICKS_PER_SEC / HZ) - 1)
+
+typedef struct {
+ u32 cntl; /* CNTL_TIMER, R/W */
+ u32 load_tim; /* LOAD_TIM, W */
+ u32 read_tim; /* READ_TIM, R */
+} omap_mpu_timer_regs_t;
+
+#define omap_mpu_timer_base(n) \
+((volatile omap_mpu_timer_regs_t*)IO_ADDRESS(OMAP_MPU_TIMER_BASE + \
+ (n)*OMAP_MPU_TIMER_OFFSET))
+
+static inline unsigned long omap_mpu_timer_read(int nr)
+{
+ volatile omap_mpu_timer_regs_t* timer = omap_mpu_timer_base(nr);
+ return timer->read_tim;
+}
+
+static inline void omap_mpu_timer_start(int nr, unsigned long load_val)
+{
+ volatile omap_mpu_timer_regs_t* timer = omap_mpu_timer_base(nr);
+
+ timer->cntl = MPU_TIMER_CLOCK_ENABLE;
+ udelay(1);
+ timer->load_tim = load_val;
+ udelay(1);
+ timer->cntl = (MPU_TIMER_CLOCK_ENABLE | MPU_TIMER_AR | MPU_TIMER_ST);
+}
+
+unsigned long omap_mpu_timer_ticks_to_usecs(unsigned long nr_ticks)
+{
+ unsigned long long nsec;
+
+ nsec = cycles_2_ns((unsigned long long)nr_ticks);
+ return (unsigned long)nsec / 1000;
+}
+
+/*
+ * Last processed system timer interrupt
+ */
+static unsigned long omap_mpu_timer_last = 0;
+
+/*
+ * Returns elapsed usecs since last system timer interrupt
+ */
+static unsigned long omap_mpu_timer_gettimeoffset(void)
+{
+ unsigned long now = 0 - omap_mpu_timer_read(0);
+ unsigned long elapsed = now - omap_mpu_timer_last;
+
+ return omap_mpu_timer_ticks_to_usecs(elapsed);
+}
+
+/*
+ * Elapsed time between interrupts is calculated using timer0.
+ * Latency during the interrupt is calculated using timer1.
+ * Both timer0 and timer1 are counting at 6MHz (P2 6.5MHz).
+ */
+static irqreturn_t omap_mpu_timer_interrupt(int irq, void *dev_id,
+ struct pt_regs *regs)
+{
+ unsigned long now, latency;
+
+ write_seqlock(&xtime_lock);
+ now = 0 - omap_mpu_timer_read(0);
+ latency = MPU_TICKS_PER_SEC / HZ - omap_mpu_timer_read(1);
+ omap_mpu_timer_last = now - latency;
+ timer_tick(regs);
+ write_sequnlock(&xtime_lock);
+
+ return IRQ_HANDLED;
+}
+
+static struct irqaction omap_mpu_timer_irq = {
+ .name = "mpu timer",
+ .flags = SA_INTERRUPT | SA_TIMER,
+ .handler = omap_mpu_timer_interrupt,
+};
+
+static unsigned long omap_mpu_timer1_overflows;
+static irqreturn_t omap_mpu_timer1_interrupt(int irq, void *dev_id,
+ struct pt_regs *regs)
+{
+ omap_mpu_timer1_overflows++;
+ return IRQ_HANDLED;
+}
+
+static struct irqaction omap_mpu_timer1_irq = {
+ .name = "mpu timer1 overflow",
+ .flags = SA_INTERRUPT,
+ .handler = omap_mpu_timer1_interrupt,
+};
+
+static __init void omap_init_mpu_timer(void)
+{
+ set_cyc2ns_scale(MPU_TICKS_PER_SEC / 1000);
+ omap_timer.offset = omap_mpu_timer_gettimeoffset;
+ setup_irq(INT_TIMER1, &omap_mpu_timer1_irq);
+ setup_irq(INT_TIMER2, &omap_mpu_timer_irq);
+ omap_mpu_timer_start(0, 0xffffffff);
+ omap_mpu_timer_start(1, MPU_TIMER_TICK_PERIOD);
+}
+
+/*
+ * Scheduler clock - returns current time in nanosec units.
+ */
+unsigned long long sched_clock(void)
+{
+ unsigned long ticks = 0 - omap_mpu_timer_read(0);
+ unsigned long long ticks64;
+
+ ticks64 = omap_mpu_timer1_overflows;
+ ticks64 <<= 32;
+ ticks64 |= ticks;
+
+ return cycles_2_ns(ticks64);
+}
+#endif /* CONFIG_OMAP_MPU_TIMER */
+
+#ifdef CONFIG_OMAP_32K_TIMER
+
+#ifdef CONFIG_ARCH_OMAP1510
+#error OMAP 32KHz timer does not currently work on 1510!
+#endif
+
+/*
+ * ---------------------------------------------------------------------------
+ * 32KHz OS timer
+ *
+ * This currently works only on 16xx, as 1510 does not have the continuous
+ * 32KHz synchronous timer. The 32KHz synchronous timer is used to keep track
+ * of time in addition to the 32KHz OS timer. Using only the 32KHz OS timer
+ * on 1510 would be possible, but the timer would not be as accurate as
+ * with the 32KHz synchronized timer.
+ * ---------------------------------------------------------------------------
+ */
+#define OMAP_32K_TIMER_BASE 0xfffb9000
+#define OMAP_32K_TIMER_CR 0x08
+#define OMAP_32K_TIMER_TVR 0x00
+#define OMAP_32K_TIMER_TCR 0x04
+
+#define OMAP_32K_TICKS_PER_HZ (32768 / HZ)
+#if (32768 % HZ) != 0
+/* We cannot ignore modulo.
+ * Potential error can be as high as several percent.
+ */
+#define OMAP_32K_TICK_MODULO (32768 % HZ)
+static unsigned modulo_count = 0; /* Counts 1/HZ units */
+#endif
+
+/*
+ * TRM says 1 / HZ = ( TVR + 1) / 32768, so TRV = (32768 / HZ) - 1
+ * so with HZ = 100, TVR = 327.68.
+ */
+#define OMAP_32K_TIMER_TICK_PERIOD ((32768 / HZ) - 1)
+#define TIMER_32K_SYNCHRONIZED 0xfffbc410
+
+#define JIFFIES_TO_HW_TICKS(nr_jiffies, clock_rate) \
+ (((nr_jiffies) * (clock_rate)) / HZ)
+
+static inline void omap_32k_timer_write(int val, int reg)
+{
+ omap_writew(val, reg + OMAP_32K_TIMER_BASE);
+}
+
+static inline unsigned long omap_32k_timer_read(int reg)
+{
+ return omap_readl(reg + OMAP_32K_TIMER_BASE) & 0xffffff;
+}
+
+/*
+ * The 32KHz synchronized timer is an additional timer on 16xx.
+ * It is always running.
+ */
+static inline unsigned long omap_32k_sync_timer_read(void)
+{
+ return omap_readl(TIMER_32K_SYNCHRONIZED);
+}
+
+static inline void omap_32k_timer_start(unsigned long load_val)
+{
+ omap_32k_timer_write(load_val, OMAP_32K_TIMER_TVR);
+ omap_32k_timer_write(0x0f, OMAP_32K_TIMER_CR);
+}
+
+static inline void omap_32k_timer_stop(void)
+{
+ omap_32k_timer_write(0x0, OMAP_32K_TIMER_CR);
+}
+
+/*
+ * Rounds down to nearest usec
+ */
+static inline unsigned long omap_32k_ticks_to_usecs(unsigned long ticks_32k)
+{
+ return (ticks_32k * 5*5*5*5*5*5) >> 9;
+}
+
+static unsigned long omap_32k_last_tick = 0;
+
+/*
+ * Returns elapsed usecs since last 32k timer interrupt
+ */
+static unsigned long omap_32k_timer_gettimeoffset(void)
+{
+ unsigned long now = omap_32k_sync_timer_read();
+ return omap_32k_ticks_to_usecs(now - omap_32k_last_tick);
+}
+
+/*
+ * Timer interrupt for 32KHz timer. When dynamic tick is enabled, this
+ * function is also called from other interrupts to remove latency
+ * issues with dynamic tick. In the dynamic tick case, we need to lock
+ * with irqsave.
+ */
+static irqreturn_t omap_32k_timer_interrupt(int irq, void *dev_id,
+ struct pt_regs *regs)
+{
+ unsigned long flags;
+ unsigned long now;
+
+ write_seqlock_irqsave(&xtime_lock, flags);
+ now = omap_32k_sync_timer_read();
+
+ while (now - omap_32k_last_tick >= OMAP_32K_TICKS_PER_HZ) {
+#ifdef OMAP_32K_TICK_MODULO
+ /* Modulo addition may put omap_32k_last_tick ahead of now
+ * and cause unwanted repetition of the while loop.
+ */
+ if (unlikely(now - omap_32k_last_tick == ~0))
+ break;
+
+ modulo_count += OMAP_32K_TICK_MODULO;
+ if (modulo_count > HZ) {
+ ++omap_32k_last_tick;
+ modulo_count -= HZ;
+ }
+#endif
+ omap_32k_last_tick += OMAP_32K_TICKS_PER_HZ;
+ timer_tick(regs);
+ }
+
+ /* Restart timer so we don't drift off due to modulo or dynamic tick.
+ * By default we program the next timer to be continuous to avoid
+ * latencies during high system load. During dynamic tick operation the
+ * continuous timer can be overridden from pm_idle to be longer.
+ */
+ omap_32k_timer_start(omap_32k_last_tick + OMAP_32K_TICKS_PER_HZ - now);
+ write_sequnlock_irqrestore(&xtime_lock, flags);
+
+ return IRQ_HANDLED;
+}
+
+#ifdef CONFIG_NO_IDLE_HZ
+/*
+ * Programs the next timer interrupt needed. Called when dynamic tick is
+ * enabled, and to reprogram the ticks to skip from pm_idle. Note that
+ * we can keep the timer continuous, and don't need to set it to run in
+ * one-shot mode. This is because the timer will get reprogrammed again
+ * after next interrupt.
+ */
+void omap_32k_timer_reprogram(unsigned long next_tick)
+{
+ omap_32k_timer_start(JIFFIES_TO_HW_TICKS(next_tick, 32768) + 1);
+}
+
+static struct irqaction omap_32k_timer_irq;
+extern struct timer_update_handler timer_update;
+
+static int omap_32k_timer_enable_dyn_tick(void)
+{
+ /* No need to reprogram timer, just use the next interrupt */
+ return 0;
+}
+
+static int omap_32k_timer_disable_dyn_tick(void)
+{
+ omap_32k_timer_start(OMAP_32K_TIMER_TICK_PERIOD);
+ return 0;
+}
+
+static struct dyn_tick_timer omap_dyn_tick_timer = {
+ .enable = omap_32k_timer_enable_dyn_tick,
+ .disable = omap_32k_timer_disable_dyn_tick,
+ .reprogram = omap_32k_timer_reprogram,
+ .handler = omap_32k_timer_interrupt,
+};
+#endif /* CONFIG_NO_IDLE_HZ */
+
+static struct irqaction omap_32k_timer_irq = {
+ .name = "32KHz timer",
+ .flags = SA_INTERRUPT | SA_TIMER,
+ .handler = omap_32k_timer_interrupt,
+};
+
+static __init void omap_init_32k_timer(void)
+{
+
+#ifdef CONFIG_NO_IDLE_HZ
+ omap_timer.dyn_tick = &omap_dyn_tick_timer;
+#endif
+
+ setup_irq(INT_OS_TIMER, &omap_32k_timer_irq);
+ omap_timer.offset = omap_32k_timer_gettimeoffset;
+ omap_32k_last_tick = omap_32k_sync_timer_read();
+ omap_32k_timer_start(OMAP_32K_TIMER_TICK_PERIOD);
+}
+#endif /* CONFIG_OMAP_32K_TIMER */
+
+/*
+ * ---------------------------------------------------------------------------
+ * Timer initialization
+ * ---------------------------------------------------------------------------
+ */
+static void __init omap_timer_init(void)
+{
+#if defined(CONFIG_OMAP_MPU_TIMER)
+ omap_init_mpu_timer();
+#elif defined(CONFIG_OMAP_32K_TIMER)
+ omap_init_32k_timer();
+#else
+#error No system timer selected in Kconfig!
+#endif
+}
+
+struct sys_timer omap_timer = {
+ .init = omap_timer_init,
+ .offset = NULL, /* Initialized later */
+};
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-30 23:05:36 +0000