diff options
Diffstat (limited to 'arch/ppc/syslib/mpc10x_common.c')
-rw-r--r-- | arch/ppc/syslib/mpc10x_common.c | 203 |
1 files changed, 158 insertions, 45 deletions
diff --git a/arch/ppc/syslib/mpc10x_common.c b/arch/ppc/syslib/mpc10x_common.c index fd93adfd464..8fc5f415452 100644 --- a/arch/ppc/syslib/mpc10x_common.c +++ b/arch/ppc/syslib/mpc10x_common.c @@ -21,6 +21,9 @@ #include <linux/init.h> #include <linux/pci.h> #include <linux/slab.h> +#include <linux/serial_8250.h> +#include <linux/fsl_devices.h> +#include <linux/device.h> #include <asm/byteorder.h> #include <asm/io.h> @@ -30,16 +33,7 @@ #include <asm/pci-bridge.h> #include <asm/open_pic.h> #include <asm/mpc10x.h> -#include <asm/ocp.h> - -/* The OCP structure is fixed by code below, before OCP initialises. - paddr depends on where the board places the EUMB. - - fixed in mpc10x_bridge_init(). - irq depends on two things: - > does the board use the EPIC at all? (PCORE does not). - > is the EPIC in serial or parallel mode? - - fixed in mpc10x_set_openpic(). -*/ +#include <asm/ppc_sys.h> #ifdef CONFIG_MPC10X_OPENPIC #ifdef CONFIG_EPIC_SERIAL_MODE @@ -50,35 +44,140 @@ #define MPC10X_I2C_IRQ (EPIC_IRQ_BASE + NUM_8259_INTERRUPTS) #define MPC10X_DMA0_IRQ (EPIC_IRQ_BASE + 1 + NUM_8259_INTERRUPTS) #define MPC10X_DMA1_IRQ (EPIC_IRQ_BASE + 2 + NUM_8259_INTERRUPTS) +#define MPC10X_UART0_IRQ (EPIC_IRQ_BASE + 4 + NUM_8259_INTERRUPTS) #else -#define MPC10X_I2C_IRQ OCP_IRQ_NA -#define MPC10X_DMA0_IRQ OCP_IRQ_NA -#define MPC10X_DMA1_IRQ OCP_IRQ_NA +#define MPC10X_I2C_IRQ -1 +#define MPC10X_DMA0_IRQ -1 +#define MPC10X_DMA1_IRQ -1 +#define MPC10X_UART0_IRQ -1 #endif - -struct ocp_def core_ocp[] = { - { .vendor = OCP_VENDOR_INVALID - } +static struct fsl_i2c_platform_data mpc10x_i2c_pdata = { + .device_flags = 0, }; -static struct ocp_fs_i2c_data mpc10x_i2c_data = { - .flags = 0 +static struct plat_serial8250_port serial_platform_data[] = { + [0] = { + .mapbase = 0x4500, + .iotype = UPIO_MEM, + .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, + }, + [1] = { + .mapbase = 0x4600, + .iotype = UPIO_MEM, + .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, + }, + { }, }; -static struct ocp_def mpc10x_i2c_ocp = { - .vendor = OCP_VENDOR_MOTOROLA, - .function = OCP_FUNC_IIC, - .index = 0, - .additions = &mpc10x_i2c_data + +struct platform_device ppc_sys_platform_devices[] = { + [MPC10X_IIC1] = { + .name = "fsl-i2c", + .id = 1, + .dev.platform_data = &mpc10x_i2c_pdata, + .num_resources = 2, + .resource = (struct resource[]) { + { + .start = MPC10X_EUMB_I2C_OFFSET, + .end = MPC10X_EUMB_I2C_OFFSET + + MPC10X_EUMB_I2C_SIZE - 1, + .flags = IORESOURCE_MEM, + }, + { + .flags = IORESOURCE_IRQ + }, + }, + }, + [MPC10X_DMA0] = { + .name = "fsl-dma", + .id = 0, + .num_resources = 2, + .resource = (struct resource[]) { + { + .start = MPC10X_EUMB_DMA_OFFSET + 0x10, + .end = MPC10X_EUMB_DMA_OFFSET + 0x1f, + .flags = IORESOURCE_MEM, + }, + { + .flags = IORESOURCE_IRQ, + }, + }, + }, + [MPC10X_DMA1] = { + .name = "fsl-dma", + .id = 1, + .num_resources = 2, + .resource = (struct resource[]) { + { + .start = MPC10X_EUMB_DMA_OFFSET + 0x20, + .end = MPC10X_EUMB_DMA_OFFSET + 0x2f, + .flags = IORESOURCE_MEM, + }, + { + .flags = IORESOURCE_IRQ, + }, + }, + }, + [MPC10X_DMA1] = { + .name = "fsl-dma", + .id = 1, + .num_resources = 2, + .resource = (struct resource[]) { + { + .start = MPC10X_EUMB_DMA_OFFSET + 0x20, + .end = MPC10X_EUMB_DMA_OFFSET + 0x2f, + .flags = IORESOURCE_MEM, + }, + { + .flags = IORESOURCE_IRQ, + }, + }, + }, + [MPC10X_DUART] = { + .name = "serial8250", + .id = 0, + .dev.platform_data = serial_platform_data, + }, }; -static struct ocp_def mpc10x_dma_ocp[2] = { -{ .vendor = OCP_VENDOR_MOTOROLA, - .function = OCP_FUNC_DMA, - .index = 0 }, -{ .vendor = OCP_VENDOR_MOTOROLA, - .function = OCP_FUNC_DMA, - .index = 1 } +/* We use the PCI ID to match on */ +struct ppc_sys_spec *cur_ppc_sys_spec; +struct ppc_sys_spec ppc_sys_specs[] = { + { + .ppc_sys_name = "8245", + .mask = 0xFFFFFFFF, + .value = MPC10X_BRIDGE_8245, + .num_devices = 4, + .device_list = (enum ppc_sys_devices[]) + { + MPC10X_IIC1, MPC10X_DMA0, MPC10X_DMA1, MPC10X_DUART, + }, + }, + { + .ppc_sys_name = "8240", + .mask = 0xFFFFFFFF, + .value = MPC10X_BRIDGE_8240, + .num_devices = 3, + .device_list = (enum ppc_sys_devices[]) + { + MPC10X_IIC1, MPC10X_DMA0, MPC10X_DMA1, + }, + }, + { + .ppc_sys_name = "107", + .mask = 0xFFFFFFFF, + .value = MPC10X_BRIDGE_107, + .num_devices = 3, + .device_list = (enum ppc_sys_devices[]) + { + MPC10X_IIC1, MPC10X_DMA0, MPC10X_DMA1, + }, + }, + { /* default match */ + .ppc_sys_name = "", + .mask = 0x00000000, + .value = 0x00000000, + }, }; /* Set resources to match bridge memory map */ @@ -132,7 +231,7 @@ mpc10x_bridge_init(struct pci_controller *hose, uint new_map, uint phys_eumb_base) { - int host_bridge, picr1, picr1_bit; + int host_bridge, picr1, picr1_bit, i; ulong pci_config_addr, pci_config_data; u_char pir, byte; @@ -273,7 +372,7 @@ mpc10x_bridge_init(struct pci_controller *hose, printk("Host bridge in Agent mode\n"); /* Read or Set LMBAR & PCSRBAR? */ } - + /* Set base addr of the 8240/107 EUMB. */ early_write_config_dword(hose, 0, @@ -287,17 +386,6 @@ mpc10x_bridge_init(struct pci_controller *hose, ioremap(phys_eumb_base + MPC10X_EUMB_EPIC_OFFSET, MPC10X_EUMB_EPIC_SIZE); #endif - mpc10x_i2c_ocp.paddr = phys_eumb_base + MPC10X_EUMB_I2C_OFFSET; - mpc10x_i2c_ocp.irq = MPC10X_I2C_IRQ; - ocp_add_one_device(&mpc10x_i2c_ocp); - mpc10x_dma_ocp[0].paddr = phys_eumb_base + - MPC10X_EUMB_DMA_OFFSET + 0x100; - mpc10x_dma_ocp[0].irq = MPC10X_DMA0_IRQ; - ocp_add_one_device(&mpc10x_dma_ocp[0]); - mpc10x_dma_ocp[1].paddr = phys_eumb_base + - MPC10X_EUMB_DMA_OFFSET + 0x200; - mpc10x_dma_ocp[1].irq = MPC10X_DMA1_IRQ; - ocp_add_one_device(&mpc10x_dma_ocp[1]); } #ifdef CONFIG_MPC10X_STORE_GATHERING @@ -306,6 +394,29 @@ mpc10x_bridge_init(struct pci_controller *hose, mpc10x_disable_store_gathering(hose); #endif + /* setup platform devices for MPC10x bridges */ + identify_ppc_sys_by_id (host_bridge); + + for (i = 0; i < cur_ppc_sys_spec->num_devices; i++) { + unsigned int dev_id = cur_ppc_sys_spec->device_list[i]; + ppc_sys_fixup_mem_resource(&ppc_sys_platform_devices[dev_id], + phys_eumb_base); + } + + /* IRQ's are determined at runtime */ + ppc_sys_platform_devices[MPC10X_IIC1].resource[1].start = MPC10X_I2C_IRQ; + ppc_sys_platform_devices[MPC10X_IIC1].resource[1].end = MPC10X_I2C_IRQ; + ppc_sys_platform_devices[MPC10X_DMA0].resource[1].start = MPC10X_DMA0_IRQ; + ppc_sys_platform_devices[MPC10X_DMA0].resource[1].end = MPC10X_DMA0_IRQ; + ppc_sys_platform_devices[MPC10X_DMA1].resource[1].start = MPC10X_DMA1_IRQ; + ppc_sys_platform_devices[MPC10X_DMA1].resource[1].end = MPC10X_DMA1_IRQ; + + serial_platform_data[0].mapbase += phys_eumb_base; + serial_platform_data[0].irq = MPC10X_UART0_IRQ; + + serial_platform_data[1].mapbase += phys_eumb_base; + serial_platform_data[1].irq = MPC10X_UART0_IRQ + 1; + /* * 8240 erratum 26, 8241/8245 erratum 29, 107 erratum 23: speculative * PCI reads may return stale data so turn off. @@ -330,7 +441,7 @@ mpc10x_bridge_init(struct pci_controller *hose, * 8245 (Rev 2., dated 10/2003) says PICR2[0] is reserverd. */ if (host_bridge == MPC10X_BRIDGE_8245) { - ulong picr2; + u32 picr2; early_read_config_dword(hose, 0, PCI_DEVFN(0,0), MPC10X_CFG_PICR2_REG, &picr2); @@ -504,6 +615,8 @@ void __init mpc10x_set_openpic(void) openpic_set_sources(EPIC_IRQ_BASE, 3, OpenPIC_Addr + 0x11020); /* Skip reserved space and map Message Unit Interrupt (I2O) */ openpic_set_sources(EPIC_IRQ_BASE + 3, 1, OpenPIC_Addr + 0x110C0); + /* Skip reserved space and map Serial Interupts */ + openpic_set_sources(EPIC_IRQ_BASE + 4, 2, OpenPIC_Addr + 0x11120); openpic_init(NUM_8259_INTERRUPTS); } |