diff options
Diffstat (limited to 'arch/sh/boards')
44 files changed, 488 insertions, 2100 deletions
diff --git a/arch/sh/boards/bigsur/Makefile b/arch/sh/boards/bigsur/Makefile deleted file mode 100644 index 0ff9497ac58..00000000000 --- a/arch/sh/boards/bigsur/Makefile +++ /dev/null @@ -1,6 +0,0 @@ -# -# Makefile for the BigSur specific parts of the kernel -# - -obj-y := setup.o io.o irq.o led.o - diff --git a/arch/sh/boards/bigsur/io.c b/arch/sh/boards/bigsur/io.c deleted file mode 100644 index 23071f97eec..00000000000 --- a/arch/sh/boards/bigsur/io.c +++ /dev/null @@ -1,120 +0,0 @@ -/* - * arch/sh/boards/bigsur/io.c - * - * By Dustin McIntire (dustin@sensoria.com) (c)2001 - * Derived from io_hd64465.h, which bore the message: - * By Greg Banks <gbanks@pocketpenguins.com> - * (c) 2000 PocketPenguins Inc. - * and from io_hd64461.h, which bore the message: - * Copyright 2000 Stuart Menefy (stuart.menefy@st.com) - * - * May be copied or modified under the terms of the GNU General Public - * License. See linux/COPYING for more information. - * - * IO functions for a Hitachi Big Sur Evaluation Board. - */ - -#include <linux/kernel.h> -#include <linux/module.h> -#include <asm/machvec.h> -#include <asm/io.h> -#include <asm/bigsur/bigsur.h> - -/* Low iomap maps port 0-1K to addresses in 8byte chunks */ -#define BIGSUR_IOMAP_LO_THRESH 0x400 -#define BIGSUR_IOMAP_LO_SHIFT 3 -#define BIGSUR_IOMAP_LO_MASK ((1<<BIGSUR_IOMAP_LO_SHIFT)-1) -#define BIGSUR_IOMAP_LO_NMAP (BIGSUR_IOMAP_LO_THRESH>>BIGSUR_IOMAP_LO_SHIFT) -static u32 bigsur_iomap_lo[BIGSUR_IOMAP_LO_NMAP]; -static u8 bigsur_iomap_lo_shift[BIGSUR_IOMAP_LO_NMAP]; - -/* High iomap maps port 1K-64K to addresses in 1K chunks */ -#define BIGSUR_IOMAP_HI_THRESH 0x10000 -#define BIGSUR_IOMAP_HI_SHIFT 10 -#define BIGSUR_IOMAP_HI_MASK ((1<<BIGSUR_IOMAP_HI_SHIFT)-1) -#define BIGSUR_IOMAP_HI_NMAP (BIGSUR_IOMAP_HI_THRESH>>BIGSUR_IOMAP_HI_SHIFT) -static u32 bigsur_iomap_hi[BIGSUR_IOMAP_HI_NMAP]; -static u8 bigsur_iomap_hi_shift[BIGSUR_IOMAP_HI_NMAP]; - -void bigsur_port_map(u32 baseport, u32 nports, u32 addr, u8 shift) -{ - u32 port, endport = baseport + nports; - - pr_debug("bigsur_port_map(base=0x%0x, n=0x%0x, addr=0x%08x)\n", - baseport, nports, addr); - - for (port = baseport ; - port < endport && port < BIGSUR_IOMAP_LO_THRESH ; - port += (1<<BIGSUR_IOMAP_LO_SHIFT)) { - pr_debug(" maplo[0x%x] = 0x%08x\n", port, addr); - bigsur_iomap_lo[port>>BIGSUR_IOMAP_LO_SHIFT] = addr; - bigsur_iomap_lo_shift[port>>BIGSUR_IOMAP_LO_SHIFT] = shift; - addr += (1<<(BIGSUR_IOMAP_LO_SHIFT)); - } - - for (port = max_t(u32, baseport, BIGSUR_IOMAP_LO_THRESH); - port < endport && port < BIGSUR_IOMAP_HI_THRESH ; - port += (1<<BIGSUR_IOMAP_HI_SHIFT)) { - pr_debug(" maphi[0x%x] = 0x%08x\n", port, addr); - bigsur_iomap_hi[port>>BIGSUR_IOMAP_HI_SHIFT] = addr; - bigsur_iomap_hi_shift[port>>BIGSUR_IOMAP_HI_SHIFT] = shift; - addr += (1<<(BIGSUR_IOMAP_HI_SHIFT)); - } -} -EXPORT_SYMBOL(bigsur_port_map); - -void bigsur_port_unmap(u32 baseport, u32 nports) -{ - u32 port, endport = baseport + nports; - - pr_debug("bigsur_port_unmap(base=0x%0x, n=0x%0x)\n", baseport, nports); - - for (port = baseport ; - port < endport && port < BIGSUR_IOMAP_LO_THRESH ; - port += (1<<BIGSUR_IOMAP_LO_SHIFT)) { - bigsur_iomap_lo[port>>BIGSUR_IOMAP_LO_SHIFT] = 0; - } - - for (port = max_t(u32, baseport, BIGSUR_IOMAP_LO_THRESH); - port < endport && port < BIGSUR_IOMAP_HI_THRESH ; - port += (1<<BIGSUR_IOMAP_HI_SHIFT)) { - bigsur_iomap_hi[port>>BIGSUR_IOMAP_HI_SHIFT] = 0; - } -} -EXPORT_SYMBOL(bigsur_port_unmap); - -unsigned long bigsur_isa_port2addr(unsigned long port) -{ - unsigned long addr = 0; - unsigned char shift; - - /* Physical address not in P0, do nothing */ - if (PXSEG(port)) { - addr = port; - /* physical address in P0, map to P2 */ - } else if (port >= 0x30000) { - addr = P2SEGADDR(port); - /* Big Sur I/O + HD64465 registers 0x10000-0x30000 */ - } else if (port >= BIGSUR_IOMAP_HI_THRESH) { - addr = BIGSUR_INTERNAL_BASE + (port - BIGSUR_IOMAP_HI_THRESH); - /* Handle remapping of high IO/PCI IO ports */ - } else if (port >= BIGSUR_IOMAP_LO_THRESH) { - addr = bigsur_iomap_hi[port >> BIGSUR_IOMAP_HI_SHIFT]; - shift = bigsur_iomap_hi_shift[port >> BIGSUR_IOMAP_HI_SHIFT]; - - if (addr != 0) - addr += (port & BIGSUR_IOMAP_HI_MASK) << shift; - } else { - /* Handle remapping of low IO ports */ - addr = bigsur_iomap_lo[port >> BIGSUR_IOMAP_LO_SHIFT]; - shift = bigsur_iomap_lo_shift[port >> BIGSUR_IOMAP_LO_SHIFT]; - - if (addr != 0) - addr += (port & BIGSUR_IOMAP_LO_MASK) << shift; - } - - pr_debug("%s(0x%08lx) = 0x%08lx\n", __FUNCTION__, port, addr); - - return addr; -} - diff --git a/arch/sh/boards/bigsur/irq.c b/arch/sh/boards/bigsur/irq.c deleted file mode 100644 index 1ab04da3638..00000000000 --- a/arch/sh/boards/bigsur/irq.c +++ /dev/null @@ -1,334 +0,0 @@ -/* - * - * By Dustin McIntire (dustin@sensoria.com) (c)2001 - * - * Setup and IRQ handling code for the HD64465 companion chip. - * by Greg Banks <gbanks@pocketpenguins.com> - * Copyright (c) 2000 PocketPenguins Inc - * - * Derived from setup_hd64465.c which bore the message: - * Greg Banks <gbanks@pocketpenguins.com> - * Copyright (c) 2000 PocketPenguins Inc and - * Copyright (C) 2000 YAEGASHI Takeshi - * and setup_cqreek.c which bore message: - * Copyright (C) 2000 Niibe Yutaka - * - * May be copied or modified under the terms of the GNU General Public - * License. See linux/COPYING for more information. - * - * IRQ functions for a Hitachi Big Sur Evaluation Board. - * - */ -#undef DEBUG - -#include <linux/sched.h> -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/param.h> -#include <linux/ioport.h> -#include <linux/interrupt.h> -#include <linux/init.h> -#include <linux/irq.h> -#include <linux/bitops.h> - -#include <asm/io.h> -#include <asm/irq.h> - -#include <asm/bigsur/io.h> -#include <asm/hd64465/hd64465.h> -#include <asm/bigsur/bigsur.h> - -//#define BIGSUR_DEBUG 3 -#undef BIGSUR_DEBUG - -#ifdef BIGSUR_DEBUG -#define DIPRINTK(n, args...) if (BIGSUR_DEBUG>(n)) printk(args) -#else -#define DIPRINTK(n, args...) -#endif /* BIGSUR_DEBUG */ - -#ifdef CONFIG_HD64465 -extern int hd64465_irq_demux(int irq); -#endif /* CONFIG_HD64465 */ - - -/*===========================================================*/ -// Big Sur CPLD IRQ Routines -/*===========================================================*/ - -/* Level 1 IRQ routines */ -static void disable_bigsur_l1irq(unsigned int irq) -{ - unsigned char mask; - unsigned int mask_port = ((irq - BIGSUR_IRQ_LOW)/8) ? BIGSUR_IRLMR1 : BIGSUR_IRLMR0; - unsigned char bit = (1 << ((irq - MGATE_IRQ_LOW)%8) ); - - if(irq >= BIGSUR_IRQ_LOW && irq < BIGSUR_IRQ_HIGH) { - pr_debug("Disable L1 IRQ %d\n", irq); - DIPRINTK(2,"disable_bigsur_l1irq: IMR=0x%08x mask=0x%x\n", - mask_port, bit); - - /* Disable IRQ - set mask bit */ - mask = inb(mask_port) | bit; - outb(mask, mask_port); - return; - } - pr_debug("disable_bigsur_l1irq: Invalid IRQ %d\n", irq); -} - -static void enable_bigsur_l1irq(unsigned int irq) -{ - unsigned char mask; - unsigned int mask_port = ((irq - BIGSUR_IRQ_LOW)/8) ? BIGSUR_IRLMR1 : BIGSUR_IRLMR0; - unsigned char bit = (1 << ((irq - MGATE_IRQ_LOW)%8) ); - - if(irq >= BIGSUR_IRQ_LOW && irq < BIGSUR_IRQ_HIGH) { - pr_debug("Enable L1 IRQ %d\n", irq); - DIPRINTK(2,"enable_bigsur_l1irq: IMR=0x%08x mask=0x%x\n", - mask_port, bit); - /* Enable L1 IRQ - clear mask bit */ - mask = inb(mask_port) & ~bit; - outb(mask, mask_port); - return; - } - pr_debug("enable_bigsur_l1irq: Invalid IRQ %d\n", irq); -} - - -/* Level 2 irq masks and registers for L2 decoding */ -/* Level2 bitmasks for each level 1 IRQ */ -const u32 bigsur_l2irq_mask[] = - {0x40,0x80,0x08,0x01,0x01,0x3C,0x3E,0xFF,0x40,0x80,0x06,0x03}; -/* Level2 to ISR[n] map for each level 1 IRQ */ -const u32 bigsur_l2irq_reg[] = - { 2, 2, 3, 3, 1, 2, 1, 0, 1, 1, 3, 2}; -/* Level2 to Level 1 IRQ map */ -const u32 bigsur_l2_l1_map[] = - {7,7,7,7,7,7,7,7, 4,6,6,6,6,6,8,9, 11,11,5,5,5,5,0,1, 3,10,10,2,-1,-1,-1,-1}; -/* IRQ inactive level (high or low) */ -const u32 bigsur_l2_inactv_state[] = {0x00, 0xBE, 0xFC, 0xF7}; - -/* CPLD external status and mask registers base and offsets */ -static const u32 isr_base = BIGSUR_IRQ0; -static const u32 isr_offset = BIGSUR_IRQ0 - BIGSUR_IRQ1; -static const u32 imr_base = BIGSUR_IMR0; -static const u32 imr_offset = BIGSUR_IMR0 - BIGSUR_IMR1; - -#define REG_NUM(irq) ((irq-BIGSUR_2NDLVL_IRQ_LOW)/8 ) - -/* Level 2 IRQ routines */ -static void disable_bigsur_l2irq(unsigned int irq) -{ - unsigned char mask; - unsigned char bit = 1 << ((irq-BIGSUR_2NDLVL_IRQ_LOW)%8); - unsigned int mask_port = imr_base - REG_NUM(irq)*imr_offset; - - if(irq >= BIGSUR_2NDLVL_IRQ_LOW && irq < BIGSUR_2NDLVL_IRQ_HIGH) { - pr_debug("Disable L2 IRQ %d\n", irq); - DIPRINTK(2,"disable_bigsur_l2irq: IMR=0x%08x mask=0x%x\n", - mask_port, bit); - - /* Disable L2 IRQ - set mask bit */ - mask = inb(mask_port) | bit; - outb(mask, mask_port); - return; - } - pr_debug("disable_bigsur_l2irq: Invalid IRQ %d\n", irq); -} - -static void enable_bigsur_l2irq(unsigned int irq) -{ - unsigned char mask; - unsigned char bit = 1 << ((irq-BIGSUR_2NDLVL_IRQ_LOW)%8); - unsigned int mask_port = imr_base - REG_NUM(irq)*imr_offset; - - if(irq >= BIGSUR_2NDLVL_IRQ_LOW && irq < BIGSUR_2NDLVL_IRQ_HIGH) { - pr_debug("Enable L2 IRQ %d\n", irq); - DIPRINTK(2,"enable_bigsur_l2irq: IMR=0x%08x mask=0x%x\n", - mask_port, bit); - - /* Enable L2 IRQ - clear mask bit */ - mask = inb(mask_port) & ~bit; - outb(mask, mask_port); - return; - } - pr_debug("enable_bigsur_l2irq: Invalid IRQ %d\n", irq); -} - -static void mask_and_ack_bigsur(unsigned int irq) -{ - pr_debug("mask_and_ack_bigsur IRQ %d\n", irq); - if(irq >= BIGSUR_IRQ_LOW && irq < BIGSUR_IRQ_HIGH) - disable_bigsur_l1irq(irq); - else - disable_bigsur_l2irq(irq); -} - -static void end_bigsur_irq(unsigned int irq) -{ - pr_debug("end_bigsur_irq IRQ %d\n", irq); - if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS))) { - if(irq >= BIGSUR_IRQ_LOW && irq < BIGSUR_IRQ_HIGH) - enable_bigsur_l1irq(irq); - else - enable_bigsur_l2irq(irq); - } -} - -static unsigned int startup_bigsur_irq(unsigned int irq) -{ - u8 mask; - u32 reg; - - pr_debug("startup_bigsur_irq IRQ %d\n", irq); - - if(irq >= BIGSUR_IRQ_LOW && irq < BIGSUR_IRQ_HIGH) { - /* Enable the L1 IRQ */ - enable_bigsur_l1irq(irq); - /* Enable all L2 IRQs in this L1 IRQ */ - mask = ~(bigsur_l2irq_mask[irq-BIGSUR_IRQ_LOW]); - reg = imr_base - bigsur_l2irq_reg[irq-BIGSUR_IRQ_LOW] * imr_offset; - mask &= inb(reg); - outb(mask,reg); - DIPRINTK(2,"startup_bigsur_irq: IMR=0x%08x mask=0x%x\n",reg,inb(reg)); - } - else { - /* Enable the L2 IRQ - clear mask bit */ - enable_bigsur_l2irq(irq); - /* Enable the L1 bit masking this L2 IRQ */ - enable_bigsur_l1irq(bigsur_l2_l1_map[irq-BIGSUR_2NDLVL_IRQ_LOW]); - DIPRINTK(2,"startup_bigsur_irq: L1=%d L2=%d\n", - bigsur_l2_l1_map[irq-BIGSUR_2NDLVL_IRQ_LOW],irq); - } - return 0; -} - -static void shutdown_bigsur_irq(unsigned int irq) -{ - pr_debug("shutdown_bigsur_irq IRQ %d\n", irq); - if(irq >= BIGSUR_IRQ_LOW && irq < BIGSUR_IRQ_HIGH) - disable_bigsur_l1irq(irq); - else - disable_bigsur_l2irq(irq); -} - -/* Define the IRQ structures for the L1 and L2 IRQ types */ -static struct hw_interrupt_type bigsur_l1irq_type = { - .typename = "BigSur-CPLD-Level1-IRQ", - .startup = startup_bigsur_irq, - .shutdown = shutdown_bigsur_irq, - .enable = enable_bigsur_l1irq, - .disable = disable_bigsur_l1irq, - .ack = mask_and_ack_bigsur, - .end = end_bigsur_irq -}; - -static struct hw_interrupt_type bigsur_l2irq_type = { - .typename = "BigSur-CPLD-Level2-IRQ", - .startup = startup_bigsur_irq, - .shutdown =shutdown_bigsur_irq, - .enable = enable_bigsur_l2irq, - .disable = disable_bigsur_l2irq, - .ack = mask_and_ack_bigsur, - .end = end_bigsur_irq -}; - - -static void make_bigsur_l1isr(unsigned int irq) { - - /* sanity check first */ - if(irq >= BIGSUR_IRQ_LOW && irq < BIGSUR_IRQ_HIGH) { - /* save the handler in the main description table */ - irq_desc[irq].chip = &bigsur_l1irq_type; - irq_desc[irq].status = IRQ_DISABLED; - irq_desc[irq].action = 0; - irq_desc[irq].depth = 1; - - disable_bigsur_l1irq(irq); - return; - } - pr_debug("make_bigsur_l1isr: bad irq, %d\n", irq); - return; -} - -static void make_bigsur_l2isr(unsigned int irq) { - - /* sanity check first */ - if(irq >= BIGSUR_2NDLVL_IRQ_LOW && irq < BIGSUR_2NDLVL_IRQ_HIGH) { - /* save the handler in the main description table */ - irq_desc[irq].chip = &bigsur_l2irq_type; - irq_desc[irq].status = IRQ_DISABLED; - irq_desc[irq].action = 0; - irq_desc[irq].depth = 1; - - disable_bigsur_l2irq(irq); - return; - } - pr_debug("make_bigsur_l2isr: bad irq, %d\n", irq); - return; -} - -/* The IRQ's will be decoded as follows: - * If a level 2 handler exists and there is an unmasked active - * IRQ, the 2nd level handler will be called. - * If a level 2 handler does not exist for the active IRQ - * the 1st level handler will be called. - */ - -int bigsur_irq_demux(int irq) -{ - int dmux_irq = irq; - u8 mask, actv_irqs; - u32 reg_num; - - DIPRINTK(3,"bigsur_irq_demux, irq=%d\n", irq); - /* decode the 1st level IRQ */ - if(irq >= BIGSUR_IRQ_LOW && irq < BIGSUR_IRQ_HIGH) { - /* Get corresponding L2 ISR bitmask and ISR number */ - mask = bigsur_l2irq_mask[irq-BIGSUR_IRQ_LOW]; - reg_num = bigsur_l2irq_reg[irq-BIGSUR_IRQ_LOW]; - /* find the active IRQ's (XOR with inactive level)*/ - actv_irqs = inb(isr_base-reg_num*isr_offset) ^ - bigsur_l2_inactv_state[reg_num]; - /* decode active IRQ's */ - actv_irqs = actv_irqs & mask & ~(inb(imr_base-reg_num*imr_offset)); - /* if NEZ then we have an active L2 IRQ */ - if(actv_irqs) dmux_irq = ffz(~actv_irqs) + reg_num*8+BIGSUR_2NDLVL_IRQ_LOW; - /* if no 2nd level IRQ action, but has 1st level, use 1st level handler */ - if(!irq_desc[dmux_irq].action && irq_desc[irq].action) - dmux_irq = irq; - DIPRINTK(1,"bigsur_irq_demux: irq=%d dmux_irq=%d mask=0x%04x reg=%d\n", - irq, dmux_irq, mask, reg_num); - } -#ifdef CONFIG_HD64465 - dmux_irq = hd64465_irq_demux(dmux_irq); -#endif /* CONFIG_HD64465 */ - DIPRINTK(3,"bigsur_irq_demux, demux_irq=%d\n", dmux_irq); - - return dmux_irq; -} - -/*===========================================================*/ -// Big Sur Init Routines -/*===========================================================*/ -void __init init_bigsur_IRQ(void) -{ - int i; - - if (!MACH_BIGSUR) return; - - /* Create ISR's for Big Sur CPLD IRQ's */ - /*==============================================================*/ - for(i=BIGSUR_IRQ_LOW;i<BIGSUR_IRQ_HIGH;i++) - make_bigsur_l1isr(i); - - printk(KERN_INFO "Big Sur CPLD L1 interrupts %d to %d.\n", - BIGSUR_IRQ_LOW,BIGSUR_IRQ_HIGH); - - for(i=BIGSUR_2NDLVL_IRQ_LOW;i<BIGSUR_2NDLVL_IRQ_HIGH;i++) - make_bigsur_l2isr(i); - - printk(KERN_INFO "Big Sur CPLD L2 interrupts %d to %d.\n", - BIGSUR_2NDLVL_IRQ_LOW,BIGSUR_2NDLVL_IRQ_HIGH); - -} diff --git a/arch/sh/boards/bigsur/led.c b/arch/sh/boards/bigsur/led.c deleted file mode 100644 index d221439aafc..00000000000 --- a/arch/sh/boards/bigsur/led.c +++ /dev/null @@ -1,54 +0,0 @@ -/* - * linux/arch/sh/boards/bigsur/led.c - * - * By Dustin McIntire (dustin@sensoria.com) (c)2001 - * Derived from led_se.c and led.c, which bore the message: - * Copyright (C) 2000 Stuart Menefy <stuart.menefy@st.com> - * - * May be copied or modified under the terms of the GNU General Public - * License. See linux/COPYING for more information. - * - * This file contains Big Sur specific LED code. - */ - -#include <asm/io.h> -#include <asm/bigsur/bigsur.h> - -static void mach_led(int position, int value) -{ - int word; - - word = bigsur_inl(BIGSUR_CSLR); - if (value) { - bigsur_outl(word & ~BIGSUR_LED, BIGSUR_CSLR); - } else { - bigsur_outl(word | BIGSUR_LED, BIGSUR_CSLR); - } -} - -#ifdef CONFIG_HEARTBEAT - -#include <linux/sched.h> - -/* Cycle the LED on/off */ -void heartbeat_bigsur(void) -{ - static unsigned cnt = 0, period = 0, dist = 0; - - if (cnt == 0 || cnt == dist) - mach_led( -1, 1); - else if (cnt == 7 || cnt == dist+7) - mach_led( -1, 0); - - if (++cnt > period) { - cnt = 0; - /* The hyperbolic function below modifies the heartbeat period - * length in dependency of the current (5min) load. It goes - * through the points f(0)=126, f(1)=86, f(5)=51, - * f(inf)->30. */ - period = ((672<<FSHIFT)/(5*avenrun[0]+(7<<FSHIFT))) + 30; - dist = period / 4; - } -} -#endif /* CONFIG_HEARTBEAT */ - diff --git a/arch/sh/boards/bigsur/setup.c b/arch/sh/boards/bigsur/setup.c deleted file mode 100644 index 9711c20fc9e..00000000000 --- a/arch/sh/boards/bigsur/setup.c +++ /dev/null @@ -1,88 +0,0 @@ -/* - * - * By Dustin McIntire (dustin@sensoria.com) (c)2001 - * - * Setup and IRQ handling code for the HD64465 companion chip. - * by Greg Banks <gbanks@pocketpenguins.com> - * Copyright (c) 2000 PocketPenguins Inc - * - * Derived from setup_hd64465.c which bore the message: - * Greg Banks <gbanks@pocketpenguins.com> - * Copyright (c) 2000 PocketPenguins Inc and - * Copyright (C) 2000 YAEGASHI Takeshi - * and setup_cqreek.c which bore message: - * Copyright (C) 2000 Niibe Yutaka - * - * May be copied or modified under the terms of the GNU General Public - * License. See linux/COPYING for more information. - * - * Setup functions for a Hitachi Big Sur Evaluation Board. - * - */ - -#include <linux/sched.h> -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/param.h> -#include <linux/ioport.h> -#include <linux/interrupt.h> -#include <linux/init.h> -#include <linux/irq.h> -#include <linux/bitops.h> - -#include <asm/io.h> -#include <asm/irq.h> -#include <asm/machvec.h> -#include <asm/bigsur/io.h> -#include <asm/hd64465/hd64465.h> -#include <asm/bigsur/bigsur.h> - -/*===========================================================*/ -// Big Sur Init Routines -/*===========================================================*/ - -static void __init bigsur_setup(char **cmdline_p) -{ - /* Mask all 2nd level IRQ's */ - outb(-1,BIGSUR_IMR0); - outb(-1,BIGSUR_IMR1); - outb(-1,BIGSUR_IMR2); - outb(-1,BIGSUR_IMR3); - - /* Mask 1st level interrupts */ - outb(-1,BIGSUR_IRLMR0); - outb(-1,BIGSUR_IRLMR1); - -#if defined (CONFIG_HD64465) && defined (CONFIG_SERIAL) - /* remap IO ports for first ISA serial port to HD64465 UART */ - bigsur_port_map(0x3f8, 8, CONFIG_HD64465_IOBASE + 0x8000, 1); -#endif /* CONFIG_HD64465 && CONFIG_SERIAL */ - /* TODO: setup IDE registers */ - bigsur_port_map(BIGSUR_IDECTL_IOPORT, 2, BIGSUR_ICTL, 8); - /* Setup the Ethernet port to BIGSUR_ETHER_IOPORT */ - bigsur_port_map(BIGSUR_ETHER_IOPORT, 16, BIGSUR_ETHR+BIGSUR_ETHER_IOPORT, 0); - /* set page to 1 */ - outw(1, BIGSUR_ETHR+0xe); - /* set the IO port to BIGSUR_ETHER_IOPORT */ - outw(BIGSUR_ETHER_IOPORT<<3, BIGSUR_ETHR+0x2); -} - -/* - * The Machine Vector - */ -extern void heartbeat_bigsur(void); -extern void init_bigsur_IRQ(void); - -struct sh_machine_vector mv_bigsur __initmv = { - .mv_name = "Big Sur", - .mv_setup = bigsur_setup, - - .mv_isa_port2addr = bigsur_isa_port2addr, - .mv_irq_demux = bigsur_irq_demux, - - .mv_init_irq = init_bigsur_IRQ, -#ifdef CONFIG_HEARTBEAT - .mv_heartbeat = heartbeat_bigsur, -#endif -}; -ALIAS_MV(bigsur) diff --git a/arch/sh/boards/ec3104/Makefile b/arch/sh/boards/ec3104/Makefile deleted file mode 100644 index 178891534b6..00000000000 --- a/arch/sh/boards/ec3104/Makefile +++ /dev/null @@ -1,6 +0,0 @@ -# -# Makefile for the EC3104 specific parts of the kernel -# - -obj-y := setup.o io.o irq.o - diff --git a/arch/sh/boards/ec3104/io.c b/arch/sh/boards/ec3104/io.c deleted file mode 100644 index 2f86394b280..00000000000 --- a/arch/sh/boards/ec3104/io.c +++ /dev/null @@ -1,81 +0,0 @@ -/* - * linux/arch/sh/boards/ec3104/io.c - * EC3104 companion chip support - * - * Copyright (C) 2000 Philipp Rumpf <prumpf@tux.org> - * - */ -/* EC3104 note: - * This code was written without any documentation about the EC3104 chip. While - * I hope I got most of the basic functionality right, the register names I use - * are most likely completely different from those in the chip documentation. - * - * If you have any further information about the EC3104, please tell me - * (prumpf@tux.org). - */ - -#include <linux/kernel.h> -#include <linux/types.h> -#include <asm/io.h> -#include <asm/page.h> -#include <asm/ec3104/ec3104.h> - -/* - * EC3104 has a real ISA bus which we redirect low port accesses to (the - * actual device on mine is a ESS 1868, and I don't want to hack the driver - * more than strictly necessary). I am not going to duplicate the - * hard coding of PC addresses (for the 16550s aso) here though; it's just - * too ugly. - */ - -#define low_port(port) ((port) < 0x10000) - -static inline unsigned long port2addr(unsigned long port) -{ - switch(port >> 16) { - case 0: - return EC3104_ISA_BASE + port * 2; - - /* XXX hack. it's unclear what to do about the serial ports */ - case 1: - return EC3104_BASE + (port&0xffff) * 4; - - default: - /* XXX PCMCIA */ - return 0; - } -} - -unsigned char ec3104_inb(unsigned long port) -{ - u8 ret; - - ret = *(volatile u8 *)port2addr(port); - - return ret; -} - -unsigned short ec3104_inw(unsigned long port) -{ - BUG(); -} - -unsigned long ec3104_inl(unsigned long port) -{ - BUG(); -} - -void ec3104_outb(unsigned char data, unsigned long port) -{ - *(volatile u8 *)port2addr(port) = data; -} - -void ec3104_outw(unsigned short data, unsigned long port) -{ - BUG(); -} - -void ec3104_outl(unsigned long data, unsigned long port) -{ - BUG(); -} diff --git a/arch/sh/boards/ec3104/irq.c b/arch/sh/boards/ec3104/irq.c deleted file mode 100644 index ffa4ff1f090..00000000000 --- a/arch/sh/boards/ec3104/irq.c +++ /dev/null @@ -1,196 +0,0 @@ -/* - * linux/arch/sh/boards/ec3104/irq.c - * EC3104 companion chip support - * - * Copyright (C) 2000 Philipp Rumpf <prumpf@tux.org> - * - */ - -#include <asm/io.h> -#include <asm/irq.h> -#include <asm/ec3104/ec3104.h> - -/* This is for debugging mostly; here's the table that I intend to keep - * in here: - * - * index function base addr power interrupt bit - * 0 power b0ec0000 --- 00000001 (unused) - * 1 irqs b0ec1000 --- 00000002 (unused) - * 2 ?? b0ec2000 b0ec0008 00000004 - * 3 PS2 (1) b0ec3000 b0ec000c 00000008 - * 4 PS2 (2) b0ec4000 b0ec0010 00000010 - * 5 ?? b0ec5000 b0ec0014 00000020 - * 6 I2C b0ec6000 b0ec0018 00000040 - * 7 serial (1) b0ec7000 b0ec001c 00000080 - * 8 serial (2) b0ec8000 b0ec0020 00000100 - * 9 serial (3) b0ec9000 b0ec0024 00000200 - * 10 serial (4) b0eca000 b0ec0028 00000400 - * 12 GPIO (1) b0ecc000 b0ec0030 - * 13 GPIO (2) b0ecc000 b0ec0030 - * 16 pcmcia (1) b0ed0000 b0ec0040 00010000 - * 17 pcmcia (2) b0ed1000 b0ec0044 00020000 - */ - -/* I used the register names from another interrupt controller I worked with, - * since it seems to be identical to the ec3104 except that all bits are - * inverted: - * - * IRR: Interrupt Request Register (pending and enabled interrupts) - * IMR: Interrupt Mask Register (which interrupts are enabled) - * IPR: Interrupt Pending Register (pending interrupts, even disabled ones) - * - * 0 bits mean pending or enabled, 1 bits mean not pending or disabled. all - * IRQs seem to be level-triggered. - */ - -#define EC3104_IRR (EC3104_BASE + 0x1000) -#define EC3104_IMR (EC3104_BASE + 0x1004) -#define EC3104_IPR (EC3104_BASE + 0x1008) - -#define ctrl_readl(addr) (*(volatile u32 *)(addr)) -#define ctrl_writel(data,addr) (*(volatile u32 *)(addr) = (data)) -#define ctrl_readb(addr) (*(volatile u8 *)(addr)) - -static char *ec3104_name(unsigned index) -{ - switch(index) { - case 0: - return "power management"; - case 1: - return "interrupts"; - case 3: - return "PS2 (1)"; - case 4: - return "PS2 (2)"; - case 5: - return "I2C (1)"; - case 6: - return "I2C (2)"; - case 7: - return "serial (1)"; - case 8: - return "serial (2)"; - case 9: - return "serial (3)"; - case 10: - return "serial (4)"; - case 16: - return "pcmcia (1)"; - case 17: - return "pcmcia (2)"; - default: { - static char buf[32]; - - sprintf(buf, "unknown (%d)", index); - - return buf; - } - } -} - -int get_pending_interrupts(char *buf) -{ - u32 ipr; - u32 bit; - char *p = buf; - - p += sprintf(p, "pending: ("); - - ipr = ctrl_inl(EC3104_IPR); - - for (bit = 1; bit < 32; bit++) - if (!(ipr & (1<<bit))) - p += sprintf(p, "%s ", ec3104_name(bit)); - - p += sprintf(p, ")\n"); - - return p - buf; -} - -static inline u32 ec3104_irq2mask(unsigned int irq) -{ - return (1 << (irq - EC3104_IRQBASE)); -} - -static inline void mask_ec3104_irq(unsigned int irq) -{ - u32 mask; - - mask = ctrl_readl(EC3104_IMR); - - mask |= ec3104_irq2mask(irq); - - ctrl_writel(mask, EC3104_IMR); -} - -static inline void unmask_ec3104_irq(unsigned int irq) -{ - u32 mask; - - mask = ctrl_readl(EC3104_IMR); - - mask &= ~ec3104_irq2mask(irq); - - ctrl_writel(mask, EC3104_IMR); -} - -static void disable_ec3104_irq(unsigned int irq) -{ - mask_ec3104_irq(irq); -} - -static void enable_ec3104_irq(unsigned int irq) -{ - unmask_ec3104_irq(irq); -} - -static void mask_and_ack_ec3104_irq(unsigned int irq) -{ - mask_ec3104_irq(irq); -} - -static void end_ec3104_irq(unsigned int irq) -{ - if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS))) - unmask_ec3104_irq(irq); -} - -static unsigned int startup_ec3104_irq(unsigned int irq) -{ - unmask_ec3104_irq(irq); - - return 0; -} - -static void shutdown_ec3104_irq(unsigned int irq) -{ - mask_ec3104_irq(irq); - -} - -static struct hw_interrupt_type ec3104_int = { - .typename = "EC3104", - .enable = enable_ec3104_irq, - .disable = disable_ec3104_irq, - .ack = mask_and_ack_ec3104_irq, - .end = end_ec3104_irq, - .startup = startup_ec3104_irq, - .shutdown = shutdown_ec3104_irq, -}; - -/* Yuck. the _demux API is ugly */ -int ec3104_irq_demux(int irq) -{ - if (irq == EC3104_IRQ) { - unsigned int mask; - - mask = ctrl_readl(EC3104_IRR); - - if (mask == 0xffffffff) - return EC3104_IRQ; - else - return EC3104_IRQBASE + ffz(mask); - } - - return irq; -} diff --git a/arch/sh/boards/ec3104/setup.c b/arch/sh/boards/ec3104/setup.c deleted file mode 100644 index 902bc975a13..00000000000 --- a/arch/sh/boards/ec3104/setup.c +++ /dev/null @@ -1,65 +0,0 @@ -/* - * linux/arch/sh/boards/ec3104/setup.c - * EC3104 companion chip support - * - * Copyright (C) 2000 Philipp Rumpf <prumpf@tux.org> - * - */ -/* EC3104 note: - * This code was written without any documentation about the EC3104 chip. While - * I hope I got most of the basic functionality right, the register names I use - * are most likely completely different from those in the chip documentation. - * - * If you have any further information about the EC3104, please tell me - * (prumpf@tux.org). - */ - -#include <linux/sched.h> -#include <linux/kernel.h> -#include <linux/param.h> -#include <linux/interrupt.h> -#include <linux/init.h> -#include <linux/irq.h> -#include <linux/types.h> -#include <asm/io.h> -#include <asm/irq.h> -#include <asm/machvec.h> -#include <asm/mach/ec3104.h> - -static void __init ec3104_setup(char **cmdline_p) -{ - char str[8]; - int i; - - for (i=0; i<8; i++) - str[i] = ctrl_readb(EC3104_BASE + i); - - for (i = EC3104_IRQBASE; i < EC3104_IRQBASE + 32; i++) - irq_desc[i].handler = &ec3104_int; - - printk("initializing EC3104 \"%.8s\" at %08x, IRQ %d, IRQ base %d\n", - str, EC3104_BASE, EC3104_IRQ, EC3104_IRQBASE); - - /* mask all interrupts. this should have been done by the boot - * loader for us but we want to be sure ... */ - ctrl_writel(0xffffffff, EC3104_IMR); -} - -/* - * The Machine Vector - */ -struct sh_machine_vector mv_ec3104 __initmv = { - .mv_name = "EC3104", - .mv_setup = ec3104_setup, - .mv_nr_irqs = 96, - - .mv_inb = ec3104_inb, - .mv_inw = ec3104_inw, - .mv_inl = ec3104_inl, - .mv_outb = ec3104_outb, - .mv_outw = ec3104_outw, - .mv_outl = ec3104_outl, - - .mv_irq_demux = ec3104_irq_demux, -}; -ALIAS_MV(ec3104) diff --git a/arch/sh/boards/mpc1211/Makefile b/arch/sh/boards/mpc1211/Makefile index 1644ebed78c..8cd31b5d200 100644 --- a/arch/sh/boards/mpc1211/Makefile +++ b/arch/sh/boards/mpc1211/Makefile @@ -2,7 +2,7 @@ # Makefile for the Interface (CTP/PCI/MPC-SH02) specific parts of the kernel # -obj-y := setup.o rtc.o led.o +obj-y := setup.o rtc.o obj-$(CONFIG_PCI) += pci.o diff --git a/arch/sh/boards/mpc1211/led.c b/arch/sh/boards/mpc1211/led.c deleted file mode 100644 index 8df1591823d..00000000000 --- a/arch/sh/boards/mpc1211/led.c +++ /dev/null @@ -1,63 +0,0 @@ -/* - * linux/arch/sh/boards/mpc1211/led.c - * - * Copyright (C) 2001 Saito.K & Jeanne - * - * This file contains Interface MPC-1211 specific LED code. - */ - - -static void mach_led(int position, int value) -{ - volatile unsigned char* p = (volatile unsigned char*)0xa2000000; - - if (value) { - *p |= 1; - } else { - *p &= ~1; - } -} - -#ifdef CONFIG_HEARTBEAT - -#include <linux/sched.h> - -/* Cycle the LED's in the clasic Knightrider/Sun pattern */ -void heartbeat_mpc1211(void) -{ - static unsigned int cnt = 0, period = 0; - volatile unsigned char* p = (volatile unsigned char*)0xa2000000; - static unsigned bit = 0, up = 1; - - cnt += 1; - if (cnt < period) { - return; - } - - cnt = 0; - - /* Go through the points (roughly!): - * f(0)=10, f(1)=16, f(2)=20, f(5)=35,f(inf)->110 - */ - period = 110 - ( (300<<FSHIFT)/ - ((avenrun[0]/5) + (3<<FSHIFT)) ); - - if (up) { - if (bit == 7) { - bit--; - up=0; - } else { - bit ++; - } - } else { - if (bit == 0) { - bit++; - up=1; - } else { - bit--; - } - } - *p = 1<<bit; - -} -#endif /* CONFIG_HEARTBEAT */ diff --git a/arch/sh/boards/mpc1211/setup.c b/arch/sh/boards/mpc1211/setup.c index 7c3d1d30415..1a0604b23ce 100644 --- a/arch/sh/boards/mpc1211/setup.c +++ b/arch/sh/boards/mpc1211/setup.c @@ -10,6 +10,7 @@ #include <linux/hdreg.h> #include <linux/ide.h> #include <linux/interrupt.h> +#include <linux/platform_device.h> #include <asm/io.h> #include <asm/machvec.h> #include <asm/mpc1211/mpc1211.h> @@ -281,6 +282,32 @@ static int put_smb_blk(unsigned char *p, int address, int command, int no) return 0; } +static struct resource heartbeat_resources[] = { + [0] = { + .start = 0xa2000000, + .end = 0xa2000000 + 8 - 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device heartbeat_device = { + .name = "heartbeat", + .id = -1, + .num_resources = ARRAY_SIZE(heartbeat_resources), + .resource = heartbeat_resources, +}; + +static struct platform_device *mpc1211_devices[] __initdata = { + &heartbeat_device, +}; + +static int __init mpc1211_devices_setup(void) +{ + return platform_add_devices(mpc1211_devices, + ARRAY_SIZE(mpc1211_devices)); +} +__initcall(mpc1211_devices_setup); + /* arch/sh/boards/mpc1211/rtc.c */ void mpc1211_time_init(void); @@ -317,9 +344,5 @@ struct sh_machine_vector mv_mpc1211 __initmv = { .mv_nr_irqs = 48, .mv_irq_demux = mpc1211_irq_demux, .mv_init_irq = init_mpc1211_IRQ, - -#ifdef CONFIG_HEARTBEAT - .mv_heartbeat = heartbeat_mpc1211, -#endif }; ALIAS_MV(mpc1211) diff --git a/arch/sh/boards/renesas/r7780rp/Makefile b/arch/sh/boards/renesas/r7780rp/Makefile index 574b0316ed5..3c93012e91a 100644 --- a/arch/sh/boards/renesas/r7780rp/Makefile +++ b/arch/sh/boards/renesas/r7780rp/Makefile @@ -4,5 +4,4 @@ obj-y := setup.o io.o irq.o -obj-$(CONFIG_HEARTBEAT) += led.o obj-$(CONFIG_PUSH_SWITCH) += psw.o diff --git a/arch/sh/boards/renesas/r7780rp/io.c b/arch/sh/boards/renesas/r7780rp/io.c index 311ccccba71..f74d2ffb385 100644 --- a/arch/sh/boards/renesas/r7780rp/io.c +++ b/arch/sh/boards/renesas/r7780rp/io.c @@ -11,22 +11,9 @@ #include <linux/pci.h> #include <linux/kernel.h> #include <linux/types.h> +#include <linux/io.h> #include <asm/r7780rp.h> #include <asm/addrspace.h> -#include <asm/io.h> - -static inline unsigned long port2adr(unsigned int port) -{ - if ((0x1f0 <= port && port < 0x1f8) || port == 0x3f6) - if (port == 0x3f6) - return (PA_AREA5_IO + 0x80c); - else - return (PA_AREA5_IO + 0x1000 + ((port-0x1f0) << 1)); - else - maybebadio((unsigned long)port); - - return port; -} static inline unsigned long port88796l(unsigned int port, int flag) { @@ -40,18 +27,6 @@ static inline unsigned long port88796l(unsigned int port, int flag) return addr; } -/* The 7780 R7780RP-1 seems to have everything hooked */ -/* up pretty normally (nothing on high-bytes only...) so this */ -/* shouldn't be needed */ -static inline int shifted_port(unsigned long port) -{ - /* For IDE registers, value is not shifted */ - if ((0x1f0 <= port && port < 0x1f8) || port == 0x3f6) - return 0; - else - return 1; -} - #if defined(CONFIG_NE2000) || defined(CONFIG_NE2000_MODULE) #define CHECK_AX88796L_PORT(port) \ ((port >= AX88796L_IO_BASE) && (port < (AX88796L_IO_BASE+0x20))) @@ -70,12 +45,10 @@ u8 r7780rp_inb(unsigned long port) { if (CHECK_AX88796L_PORT(port)) return ctrl_inw(port88796l(port, 0)) & 0xff; - else if (PXSEG(port)) - return ctrl_inb(port); - else if (is_pci_ioaddr(port) || shifted_port(port)) + else if (is_pci_ioaddr(port)) return ctrl_inb(pci_ioaddr(port)); - return ctrl_inw(port2adr(port)) & 0xff; + return ctrl_inw(port) & 0xff; } u8 r7780rp_inb_p(unsigned long port) @@ -84,12 +57,10 @@ u8 r7780rp_inb_p(unsigned long port) if (CHECK_AX88796L_PORT(port)) v = ctrl_inw(port88796l(port, 0)) & 0xff; - else if (PXSEG(port)) - v = ctrl_inb(port); - else if (is_pci_ioaddr(port) || shifted_port(port)) + else if (is_pci_ioaddr(port)) v = ctrl_inb(pci_ioaddr(port)); else - v = ctrl_inw(port2adr(port)) & 0xff; + v = ctrl_inw(port) & 0xff; ctrl_delay(); @@ -98,80 +69,56 @@ u8 r7780rp_inb_p(unsigned long port) u16 r7780rp_inw(unsigned long port) { - if (CHECK_AX88796L_PORT(port)) - maybebadio(port); - else if (PXSEG(port)) - return ctrl_inw(port); - else if (is_pci_ioaddr(port) || shifted_port(port)) + if (is_pci_ioaddr(port)) return ctrl_inw(pci_ioaddr(port)); - else - maybebadio(port); - return 0; + return ctrl_inw(port); } u32 r7780rp_inl(unsigned long port) { - if (CHECK_AX88796L_PORT(port)) - maybebadio(port); - else if (PXSEG(port)) - return ctrl_inl(port); - else if (is_pci_ioaddr(port) || shifted_port(port)) + if (is_pci_ioaddr(port)) return ctrl_inl(pci_ioaddr(port)); - else - maybebadio(port); - return 0; + return ctrl_inl(port); } void r7780rp_outb(u8 value, unsigned long port) { if (CHECK_AX88796L_PORT(port)) ctrl_outw(value, port88796l(port, 0)); - else if (PXSEG(port)) - ctrl_outb(value, port); - else if (is_pci_ioaddr(port) || shifted_port(port)) + else if (is_pci_ioaddr(port)) ctrl_outb(value, pci_ioaddr(port)); else - ctrl_outw(value, port2adr(port)); + ctrl_outb(value, port); } void r7780rp_outb_p(u8 value, unsigned long port) { if (CHECK_AX88796L_PORT(port)) ctrl_outw(value, port88796l(port, 0)); - else if (PXSEG(port)) - ctrl_outb(value, port); - else if (is_pci_ioaddr(port) || shifted_port(port)) + else if (is_pci_ioaddr(port)) ctrl_outb(value, pci_ioaddr(port)); else - ctrl_outw(value, port2adr(port)); + ctrl_outb(value, port); ctrl_delay(); } void r7780rp_outw(u16 value, unsigned long port) { - if (CHECK_AX88796L_PORT(port)) - maybebadio(port); - else if (PXSEG(port)) - ctrl_outw(value, port); - else if (is_pci_ioaddr(port) || shifted_port(port)) + if (is_pci_ioaddr(port)) ctrl_outw(value, pci_ioaddr(port)); else - maybebadio(port); + ctrl_outw(value, port); } void r7780rp_outl(u32 value, unsigned long port) { - if (CHECK_AX88796L_PORT(port)) - maybebadio(port); - else if (PXSEG(port)) - ctrl_outl(value, port); - else if (is_pci_ioaddr(port) || shifted_port(port)) + if (is_pci_ioaddr(port)) ctrl_outl(value, pci_ioaddr(port)); else - maybebadio(port); + ctrl_outl(value, port); } void r7780rp_insb(unsigned long port, void *dst, unsigned long count) @@ -183,16 +130,13 @@ void r7780rp_insb(unsigned long port, void *dst, unsigned long count) p = (volatile u16 *)port88796l(port, 0); while (count--) *buf++ = *p & 0xff; - } else if (PXSEG(port)) { - while (count--) - *buf++ = *(volatile u8 *)port; - } else if (is_pci_ioaddr(port) || shifted_port(port)) { + } else if (is_pci_ioaddr(port)) { volatile u8 *bp = (volatile u8 *)pci_ioaddr(port); while (count--) *buf++ = *bp; } else { - p = (volatile u16 *)port2adr(port); + p = (volatile u16 *)port; while (count--) *buf++ = *p & 0xff; } @@ -205,30 +149,26 @@ void r7780rp_insw(unsigned long port, void *dst, unsigned long count) if (CHECK_AX88796L_PORT(port)) p = (volatile u16 *)port88796l(port, 1); - else if (PXSEG(port)) - p = (volatile u16 *)port; - else if (is_pci_ioaddr(port) || shifted_port(port)) + else if (is_pci_ioaddr(port)) p = (volatile u16 *)pci_ioaddr(port); else - p = (volatile u16 *)port2adr(port); + p = (volatile u16 *)port; while (count--) *buf++ = *p; + + flush_dcache_all(); } void r7780rp_insl(unsigned long port, void *dst, unsigned long count) { - u32 *buf = dst; - - if (CHECK_AX88796L_PORT(port)) - maybebadio(port); - else if (is_pci_ioaddr(port) || shifted_port(port)) { + if (is_pci_ioaddr(port)) { volatile u32 *p = (volatile u32 *)pci_ioaddr(port); + u32 *buf = dst; while (count--) *buf++ = *p; - } else - maybebadio(port); + } } void r7780rp_outsb(unsigned long port, const void *src, unsigned long count) @@ -240,19 +180,14 @@ void r7780rp_outsb(unsigned long port, const void *src, unsigned long count) p = (volatile u16 *)port88796l(port, 0); while (count--) *p = *buf++; - } else if (PXSEG(port)) - while (count--) - ctrl_outb(*buf++, port); - else if (is_pci_ioaddr(port) || shifted_port(port)) { + } else if (is_pci_ioaddr(port)) { volatile u8 *bp = (volatile u8 *)pci_ioaddr(port); while (count--) *bp = *buf++; - } else { - p = (volatile u16 *)port2adr(port); + } else while (count--) - *p = *buf++; - } + ctrl_outb(*buf++, port); } void r7780rp_outsw(unsigned long port, const void *src, unsigned long count) @@ -262,40 +197,37 @@ void r7780rp_outsw(unsigned long port, const void *src, unsigned long count) if (CHECK_AX88796L_PORT(port)) p = (volatile u16 *)port88796l(port, 1); - else if (PXSEG(port)) - p = (volatile u16 *)port; - else if (is_pci_ioaddr(port) || shifted_port(port)) + else if (is_pci_ioaddr(port)) p = (volatile u16 *)pci_ioaddr(port); else - p = (volatile u16 *)port2adr(port); + p = (volatile u16 *)port; while (count--) *p = *buf++; + + flush_dcache_all(); } void r7780rp_outsl(unsigned long port, const void *src, unsigned long count) { const u32 *buf = src; + u32 *p; - if (CHECK_AX88796L_PORT(port)) - maybebadio(port); - else if (is_pci_ioaddr(port) || shifted_port(port)) { - volatile u32 *p = (volatile u32 *)pci_ioaddr(port); + if (is_pci_ioaddr(port)) + p = (u32 *)pci_ioaddr(port); + else + p = (u32 *)port; - while (count--) - *p = *buf++; - } else - maybebadio(port); + while (count--) + ctrl_outl(*buf++, (unsigned long)p); } void __iomem *r7780rp_ioport_map(unsigned long port, unsigned int size) { if (CHECK_AX88796L_PORT(port)) return (void __iomem *)port88796l(port, size > 1); - else if (PXSEG(port)) - return (void __iomem *)port; - else if (is_pci_ioaddr(port) || shifted_port(port)) + else if (is_pci_ioaddr(port)) return (void __iomem *)pci_ioaddr(port); - return (void __iomem *)port2adr(port); + return (void __iomem *)port; } diff --git a/arch/sh/boards/renesas/r7780rp/led.c b/arch/sh/boards/renesas/r7780rp/led.c deleted file mode 100644 index 6a00a257afd..00000000000 --- a/arch/sh/boards/renesas/r7780rp/led.c +++ /dev/null @@ -1,43 +0,0 @@ -/* - * Copyright (C) Atom Create Engineering Co., Ltd. - * - * May be copied or modified under the terms of GNU General Public - * License. See linux/COPYING for more information. - * - * This file contains Renesas Solutions HIGHLANDER R7780RP-1 specific LED code. - */ -#include <linux/sched.h> -#include <asm/io.h> -#include <asm/r7780rp/r7780rp.h> - -/* Cycle the LED's in the clasic Knightriger/Sun pattern */ -void heartbeat_r7780rp(void) -{ - static unsigned int cnt = 0, period = 0; - volatile unsigned short *p = (volatile unsigned short *)PA_OBLED; - static unsigned bit = 0, up = 1; - unsigned bit_pos[] = {2, 1, 0, 3, 6, 5, 4, 7}; - - cnt += 1; - if (cnt < period) - return; - - cnt = 0; - - /* Go through the points (roughly!): - * f(0)=10, f(1)=16, f(2)=20, f(5)=35, f(int)->110 - */ - period = 110 - ((300 << FSHIFT)/((avenrun[0]/5) + (3<<FSHIFT))); - - *p = 1 << bit_pos[bit]; - if (up) - if (bit == 7) { - bit--; - up = 0; - } else - bit++; - else if (bit == 0) - up = 1; - else - bit--; -} diff --git a/arch/sh/boards/renesas/r7780rp/setup.c b/arch/sh/boards/renesas/r7780rp/setup.c index 9f89c8de9db..0d74db9f179 100644 --- a/arch/sh/boards/renesas/r7780rp/setup.c +++ b/arch/sh/boards/renesas/r7780rp/setup.c @@ -2,7 +2,7 @@ * arch/sh/boards/renesas/r7780rp/setup.c * * Copyright (C) 2002 Atom Create Engineering Co., Ltd. - * Copyright (C) 2005, 2006 Paul Mundt + * Copyright (C) 2005 - 2007 Paul Mundt * * Renesas Solutions Highlander R7780RP-1 Support. * @@ -12,12 +12,12 @@ */ #include <linux/init.h> #include <linux/platform_device.h> +#include <linux/pata_platform.h> #include <asm/machvec.h> #include <asm/r7780rp.h> #include <asm/clock.h> #include <asm/io.h> -extern void heartbeat_r7780rp(void); extern void init_r7780rp_IRQ(void); static struct resource m66596_usb_host_resources[] = { @@ -46,14 +46,14 @@ static struct platform_device m66596_usb_host_device = { static struct resource cf_ide_resources[] = { [0] = { - .start = 0x1f0, - .end = 0x1f0 + 8, - .flags = IORESOURCE_IO, + .start = PA_AREA5_IO + 0x1000, + .end = PA_AREA5_IO + 0x1000 + 0x08 - 1, + .flags = IORESOURCE_MEM, }, [1] = { - .start = 0x1f0 + 0x206, - .end = 0x1f0 + 8 + 0x206 + 8, - .flags = IORESOURCE_IO, + .start = PA_AREA5_IO + 0x80c, + .end = PA_AREA5_IO + 0x80c + 0x16 - 1, + .flags = IORESOURCE_MEM, }, [2] = { #ifdef CONFIG_SH_R7780MP @@ -65,16 +65,44 @@ static struct resource cf_ide_resources[] = { }, }; +static struct pata_platform_info pata_info = { + .ioport_shift = 1, +}; + static struct platform_device cf_ide_device = { .name = "pata_platform", .id = -1, .num_resources = ARRAY_SIZE(cf_ide_resources), .resource = cf_ide_resources, + .dev = { + .platform_data = &pata_info, + }, +}; + +static unsigned char heartbeat_bit_pos[] = { 2, 1, 0, 3, 6, 5, 4, 7 }; + +static struct resource heartbeat_resources[] = { + [0] = { + .start = PA_OBLED, + .end = PA_OBLED + ARRAY_SIZE(heartbeat_bit_pos) - 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device heartbeat_device = { + .name = "heartbeat", + .id = -1, + .dev = { + .platform_data = heartbeat_bit_pos, + }, + .num_resources = ARRAY_SIZE(heartbeat_resources), + .resource = heartbeat_resources, }; static struct platform_device *r7780rp_devices[] __initdata = { &m66596_usb_host_device, &cf_ide_device, + &heartbeat_device, }; static int __init r7780rp_devices_setup(void) @@ -148,7 +176,7 @@ static void __init r7780rp_setup(char **cmdline_p) #ifndef CONFIG_SH_R7780MP ctrl_outw(0x0001, PA_SDPOW); /* SD Power ON */ #endif - ctrl_outw(ctrl_inw(PA_IVDRCTL) | 0x0100, PA_IVDRCTL); /* Si13112 */ + ctrl_outw(ctrl_inw(PA_IVDRCTL) | 0x01, PA_IVDRCTL); /* Si13112 */ pm_power_off = r7780rp_power_off; } @@ -185,8 +213,5 @@ struct sh_machine_vector mv_r7780rp __initmv = { .mv_ioport_map = r7780rp_ioport_map, .mv_init_irq = init_r7780rp_IRQ, -#ifdef CONFIG_HEARTBEAT - .mv_heartbeat = heartbeat_r7780rp, -#endif }; ALIAS_MV(r7780rp) diff --git a/arch/sh/boards/renesas/rts7751r2d/Makefile b/arch/sh/boards/renesas/rts7751r2d/Makefile index 686fc9ea598..0d4c75a72be 100644 --- a/arch/sh/boards/renesas/rts7751r2d/Makefile +++ b/arch/sh/boards/renesas/rts7751r2d/Makefile @@ -2,5 +2,4 @@ # Makefile for the RTS7751R2D specific parts of the kernel # -obj-y := setup.o io.o irq.o -obj-$(CONFIG_HEARTBEAT) += led.o +obj-y := setup.o irq.o diff --git a/arch/sh/boards/renesas/rts7751r2d/io.c b/arch/sh/boards/renesas/rts7751r2d/io.c deleted file mode 100644 index f2507a80497..00000000000 --- a/arch/sh/boards/renesas/rts7751r2d/io.c +++ /dev/null @@ -1,302 +0,0 @@ -/* - * Copyright (C) 2001 Ian da Silva, Jeremy Siegel - * Based largely on io_se.c. - * - * I/O routine for Renesas Technology sales RTS7751R2D. - * - * Initial version only to support LAN access; some - * placeholder code from io_rts7751r2d.c left in with the - * expectation of later SuperIO and PCMCIA access. - */ -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/pci.h> -#include <linux/io.h> -#include <asm/rts7751r2d.h> -#include <asm/addrspace.h> - -/* - * The 7751R RTS7751R2D uses the built-in PCI controller (PCIC) - * of the 7751R processor, and has a SuperIO accessible via the PCI. - * The board also includes a PCMCIA controller on its memory bus, - * like the other Solution Engine boards. - */ - -static inline unsigned long port2adr(unsigned int port) -{ - if ((0x1f0 <= port && port < 0x1f8) || port == 0x3f6) - if (port == 0x3f6) - return (PA_AREA5_IO + 0x80c); - else - return (PA_AREA5_IO + 0x1000 + ((port-0x1f0) << 1)); - else - maybebadio((unsigned long)port); - - return port; -} - -static inline unsigned long port88796l(unsigned int port, int flag) -{ - unsigned long addr; - - if (flag) - addr = PA_AX88796L + ((port - AX88796L_IO_BASE) << 1); - else - addr = PA_AX88796L + ((port - AX88796L_IO_BASE) << 1) + 0x1000; - - return addr; -} - -/* The 7751R RTS7751R2D seems to have everything hooked */ -/* up pretty normally (nothing on high-bytes only...) so this */ -/* shouldn't be needed */ -static inline int shifted_port(unsigned long port) -{ - /* For IDE registers, value is not shifted */ - if ((0x1f0 <= port && port < 0x1f8) || port == 0x3f6) - return 0; - else - return 1; -} - -#if defined(CONFIG_NE2000) || defined(CONFIG_NE2000_MODULE) -#define CHECK_AX88796L_PORT(port) \ - ((port >= AX88796L_IO_BASE) && (port < (AX88796L_IO_BASE+0x20))) -#else -#define CHECK_AX88796L_PORT(port) (0) -#endif - -/* - * General outline: remap really low stuff [eventually] to SuperIO, - * stuff in PCI IO space (at or above window at pci.h:PCIBIOS_MIN_IO) - * is mapped through the PCI IO window. Stuff with high bits (PXSEG) - * should be way beyond the window, and is used w/o translation for - * compatibility. - */ -unsigned char rts7751r2d_inb(unsigned long port) -{ - if (CHECK_AX88796L_PORT(port)) - return (*(volatile unsigned short *)port88796l(port, 0)) & 0xff; - else if (PXSEG(port)) - return *(volatile unsigned char *)port; - else if (is_pci_ioaddr(port) || shifted_port(port)) - return *(volatile unsigned char *)pci_ioaddr(port); - else - return (*(volatile unsigned short *)port2adr(port) & 0xff); -} - -unsigned char rts7751r2d_inb_p(unsigned long port) -{ - unsigned char v; - - if (CHECK_AX88796L_PORT(port)) - v = (*(volatile unsigned short *)port88796l(port, 0)) & 0xff; - else if (PXSEG(port)) - v = *(volatile unsigned char *)port; - else if (is_pci_ioaddr(port) || shifted_port(port)) - v = *(volatile unsigned char *)pci_ioaddr(port); - else - v = (*(volatile unsigned short *)port2adr(port) & 0xff); - - ctrl_delay(); - - return v; -} - -unsigned short rts7751r2d_inw(unsigned long port) -{ - if (CHECK_AX88796L_PORT(port)) - maybebadio(port); - else if (PXSEG(port)) - return *(volatile unsigned short *)port; - else if (is_pci_ioaddr(port) || shifted_port(port)) - return *(volatile unsigned short *)pci_ioaddr(port); - else - maybebadio(port); - - return 0; -} - -unsigned int rts7751r2d_inl(unsigned long port) -{ - if (CHECK_AX88796L_PORT(port)) - maybebadio(port); - else if (PXSEG(port)) - return *(volatile unsigned long *)port; - else if (is_pci_ioaddr(port) || shifted_port(port)) - return *(volatile unsigned long *)pci_ioaddr(port); - else - maybebadio(port); - - return 0; -} - -void rts7751r2d_outb(unsigned char value, unsigned long port) -{ - if (CHECK_AX88796L_PORT(port)) - *((volatile unsigned short *)port88796l(port, 0)) = value; - else if (PXSEG(port)) - *(volatile unsigned char *)port = value; - else if (is_pci_ioaddr(port) || shifted_port(port)) - *(volatile unsigned char *)pci_ioaddr(port) = value; - else - *(volatile unsigned short *)port2adr(port) = value; -} - -void rts7751r2d_outb_p(unsigned char value, unsigned long port) -{ - if (CHECK_AX88796L_PORT(port)) - *((volatile unsigned short *)port88796l(port, 0)) = value; - else if (PXSEG(port)) - *(volatile unsigned char *)port = value; - else if (is_pci_ioaddr(port) || shifted_port(port)) - *(volatile unsigned char *)pci_ioaddr(port) = value; - else - *(volatile unsigned short *)port2adr(port) = value; - - ctrl_delay(); -} - -void rts7751r2d_outw(unsigned short value, unsigned long port) -{ - if (CHECK_AX88796L_PORT(port)) - maybebadio(port); - else if (PXSEG(port)) - *(volatile unsigned short *)port = value; - else if (is_pci_ioaddr(port) || shifted_port(port)) - *(volatile unsigned short *)pci_ioaddr(port) = value; - else - maybebadio(port); -} - -void rts7751r2d_outl(unsigned int value, unsigned long port) -{ - if (CHECK_AX88796L_PORT(port)) - maybebadio(port); - else if (PXSEG(port)) - *(volatile unsigned long *)port = value; - else if (is_pci_ioaddr(port) || shifted_port(port)) - *(volatile unsigned long *)pci_ioaddr(port) = value; - else - maybebadio(port); -} - -void rts7751r2d_insb(unsigned long port, void *addr, unsigned long count) -{ - unsigned long a = (unsigned long)addr; - volatile __u8 *bp; - volatile __u16 *p; - - if (CHECK_AX88796L_PORT(port)) { - p = (volatile unsigned short *)port88796l(port, 0); - while (count--) - ctrl_outb(*p & 0xff, a++); - } else if (PXSEG(port)) - while (count--) - ctrl_outb(ctrl_inb(port), a++); - else if (is_pci_ioaddr(port) || shifted_port(port)) { - bp = (__u8 *)pci_ioaddr(port); - while (count--) - ctrl_outb(*bp, a++); - } else { - p = (volatile unsigned short *)port2adr(port); - while (count--) - ctrl_outb(*p & 0xff, a++); - } -} - -void rts7751r2d_insw(unsigned long port, void *addr, unsigned long count) -{ - unsigned long a = (unsigned long)addr; - volatile __u16 *p; - - if (CHECK_AX88796L_PORT(port)) - p = (volatile unsigned short *)port88796l(port, 1); - else if (PXSEG(port)) - p = (volatile unsigned short *)port; - else if (is_pci_ioaddr(port) || shifted_port(port)) - p = (volatile unsigned short *)pci_ioaddr(port); - else - p = (volatile unsigned short *)port2adr(port); - while (count--) - ctrl_outw(*p, a++); -} - -void rts7751r2d_insl(unsigned long port, void *addr, unsigned long count) -{ - if (CHECK_AX88796L_PORT(port)) - maybebadio(port); - else if (is_pci_ioaddr(port) || shifted_port(port)) { - unsigned long a = (unsigned long)addr; - - while (count--) { - ctrl_outl(ctrl_inl(pci_ioaddr(port)), a); - a += 4; - } - } else - maybebadio(port); -} - -void rts7751r2d_outsb(unsigned long port, const void *addr, unsigned long count) -{ - unsigned long a = (unsigned long)addr; - volatile __u8 *bp; - volatile __u16 *p; - - if (CHECK_AX88796L_PORT(port)) { - p = (volatile unsigned short *)port88796l(port, 0); - while (count--) - *p = ctrl_inb(a++); - } else if (PXSEG(port)) - while (count--) - ctrl_outb(a++, port); - else if (is_pci_ioaddr(port) || shifted_port(port)) { - bp = (__u8 *)pci_ioaddr(port); - while (count--) - *bp = ctrl_inb(a++); - } else { - p = (volatile unsigned short *)port2adr(port); - while (count--) - *p = ctrl_inb(a++); - } -} - -void rts7751r2d_outsw(unsigned long port, const void *addr, unsigned long count) -{ - unsigned long a = (unsigned long)addr; - volatile __u16 *p; - - if (CHECK_AX88796L_PORT(port)) - p = (volatile unsigned short *)port88796l(port, 1); - else if (PXSEG(port)) - p = (volatile unsigned short *)port; - else if (is_pci_ioaddr(port) || shifted_port(port)) - p = (volatile unsigned short *)pci_ioaddr(port); - else - p = (volatile unsigned short *)port2adr(port); - - while (count--) { - ctrl_outw(*p, a); - a += 2; - } -} - -void rts7751r2d_outsl(unsigned long port, const void *addr, unsigned long count) -{ - if (CHECK_AX88796L_PORT(port)) - maybebadio(port); - else if (is_pci_ioaddr(port) || shifted_port(port)) { - unsigned long a = (unsigned long)addr; - - while (count--) { - ctrl_outl(ctrl_inl(a), pci_ioaddr(port)); - a += 4; - } - } else - maybebadio(port); -} - -unsigned long rts7751r2d_isa_port2addr(unsigned long offset) -{ - return port2adr(offset); -} diff --git a/arch/sh/boards/renesas/rts7751r2d/irq.c b/arch/sh/boards/renesas/rts7751r2d/irq.c index cb0eb20d1b4..0bae9041ace 100644 --- a/arch/sh/boards/renesas/rts7751r2d/irq.c +++ b/arch/sh/boards/renesas/rts7751r2d/irq.c @@ -9,7 +9,9 @@ * Atom Create Engineering Co., Ltd. 2002. */ #include <linux/init.h> +#include <linux/interrupt.h> #include <linux/irq.h> +#include <linux/interrupt.h> #include <linux/io.h> #include <asm/rts7751r2d.h> @@ -22,79 +24,31 @@ static int mask_pos[] = {6, 11, 9, 8, 12, 10, 5, 4, 7, 14, 13, 0, 0, 0, 0}; extern int voyagergx_irq_demux(int irq); extern void setup_voyagergx_irq(void); -static void enable_rts7751r2d_irq(unsigned int irq); -static void disable_rts7751r2d_irq(unsigned int irq); - -/* shutdown is same as "disable" */ -#define shutdown_rts7751r2d_irq disable_rts7751r2d_irq - -static void ack_rts7751r2d_irq(unsigned int irq); -static void end_rts7751r2d_irq(unsigned int irq); - -static unsigned int startup_rts7751r2d_irq(unsigned int irq) +static void enable_rts7751r2d_irq(unsigned int irq) { - enable_rts7751r2d_irq(irq); - return 0; /* never anything pending */ + /* Set priority in IPR back to original value */ + ctrl_outw(ctrl_inw(IRLCNTR1) | (1 << mask_pos[irq]), IRLCNTR1); } static void disable_rts7751r2d_irq(unsigned int irq) { - unsigned short val; - unsigned short mask = 0xffff ^ (0x0001 << mask_pos[irq]); - /* Set the priority in IPR to 0 */ - val = ctrl_inw(IRLCNTR1); - val &= mask; - ctrl_outw(val, IRLCNTR1); -} - -static void enable_rts7751r2d_irq(unsigned int irq) -{ - unsigned short val; - unsigned short value = (0x0001 << mask_pos[irq]); - - /* Set priority in IPR back to original value */ - val = ctrl_inw(IRLCNTR1); - val |= value; - ctrl_outw(val, IRLCNTR1); + ctrl_outw(ctrl_inw(IRLCNTR1) & (0xffff ^ (1 << mask_pos[irq])), + IRLCNTR1); } int rts7751r2d_irq_demux(int irq) { - int demux_irq; - - demux_irq = voyagergx_irq_demux(irq); - return demux_irq; -} - -static void ack_rts7751r2d_irq(unsigned int irq) -{ - disable_rts7751r2d_irq(irq); + return voyagergx_irq_demux(irq); } -static void end_rts7751r2d_irq(unsigned int irq) -{ - if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS))) - enable_rts7751r2d_irq(irq); -} - -static struct hw_interrupt_type rts7751r2d_irq_type = { - .typename = "RTS7751R2D IRQ", - .startup = startup_rts7751r2d_irq, - .shutdown = shutdown_rts7751r2d_irq, - .enable = enable_rts7751r2d_irq, - .disable = disable_rts7751r2d_irq, - .ack = ack_rts7751r2d_irq, - .end = end_rts7751r2d_irq, +static struct irq_chip rts7751r2d_irq_chip __read_mostly = { + .name = "rts7751r2d", + .mask = disable_rts7751r2d_irq, + .unmask = enable_rts7751r2d_irq, + .mask_ack = disable_rts7751r2d_irq, }; -static void make_rts7751r2d_irq(unsigned int irq) -{ - disable_irq_nosync(irq); - irq_desc[irq].chip = &rts7751r2d_irq_type; - disable_rts7751r2d_irq(irq); -} - /* * Initialize IRQ setting */ @@ -119,8 +73,12 @@ void __init init_rts7751r2d_IRQ(void) * IRL14=Extention #3 */ - for (i=0; i<15; i++) - make_rts7751r2d_irq(i); + for (i=0; i<15; i++) { + disable_irq_nosync(i); + set_irq_chip_and_handler_name(i, &rts7751r2d_irq_chip, + handle_level_irq, "level"); + enable_rts7751r2d_irq(i); + } setup_voyagergx_irq(); } diff --git a/arch/sh/boards/renesas/rts7751r2d/led.c b/arch/sh/boards/renesas/rts7751r2d/led.c deleted file mode 100644 index 509f548bdce..00000000000 --- a/arch/sh/boards/renesas/rts7751r2d/led.c +++ /dev/null @@ -1,44 +0,0 @@ -/* - * linux/arch/sh/boards/renesas/rts7751r2d/led.c - * - * Copyright (C) Atom Create Engineering Co., Ltd. - * - * May be copied or modified under the terms of GNU General Public - * License. See linux/COPYING for more information. - * - * This file contains Renesas Technology Sales RTS7751R2D specific LED code. - */ -#include <linux/io.h> -#include <linux/sched.h> -#include <asm/rts7751r2d.h> - -/* Cycle the LED's in the clasic Knightriger/Sun pattern */ -void heartbeat_rts7751r2d(void) -{ - static unsigned int cnt = 0, period = 0; - volatile unsigned short *p = (volatile unsigned short *)PA_OUTPORT; - static unsigned bit = 0, up = 1; - - cnt += 1; - if (cnt < period) - return; - - cnt = 0; - - /* Go through the points (roughly!): - * f(0)=10, f(1)=16, f(2)=20, f(5)=35, f(int)->110 - */ - period = 110 - ((300 << FSHIFT)/((avenrun[0]/5) + (3<<FSHIFT))); - - *p = 1 << bit; - if (up) - if (bit == 7) { - bit--; - up = 0; - } else - bit++; - else if (bit == 0) - up = 1; - else - bit--; -} diff --git a/arch/sh/boards/renesas/rts7751r2d/setup.c b/arch/sh/boards/renesas/rts7751r2d/setup.c index 5c042d35ec9..44b42082a0a 100644 --- a/arch/sh/boards/renesas/rts7751r2d/setup.c +++ b/arch/sh/boards/renesas/rts7751r2d/setup.c @@ -1,8 +1,8 @@ /* * Renesas Technology Sales RTS7751R2D Support. * - * Copyright (C) 2002 Atom Create Engineering Co., Ltd. - * Copyright (C) 2004 - 2006 Paul Mundt + * Copyright (C) 2002 - 2006 Atom Create Engineering Co., Ltd. + * Copyright (C) 2004 - 2007 Paul Mundt * * This file is subject to the terms and conditions of the GNU General Public * License. See the file "COPYING" in the main directory of this archive @@ -10,33 +10,13 @@ */ #include <linux/init.h> #include <linux/platform_device.h> +#include <linux/pata_platform.h> #include <linux/serial_8250.h> #include <linux/pm.h> #include <asm/machvec.h> -#include <asm/mach/rts7751r2d.h> -#include <asm/io.h> +#include <asm/rts7751r2d.h> #include <asm/voyagergx.h> - -extern void heartbeat_rts7751r2d(void); -extern void init_rts7751r2d_IRQ(void); -extern int rts7751r2d_irq_demux(int irq); - -extern void *voyagergx_consistent_alloc(struct device *, size_t, dma_addr_t *, gfp_t); -extern int voyagergx_consistent_free(struct device *, size_t, void *, dma_addr_t); - -static struct plat_serial8250_port uart_platform_data[] = { - { - .membase = (void *)VOYAGER_UART_BASE, - .mapbase = VOYAGER_UART_BASE, - .iotype = UPIO_MEM, - .irq = VOYAGER_UART0_IRQ, - .flags = UPF_BOOT_AUTOCONF, - .regshift = 2, - .uartclk = (9600 * 16), - }, { - .flags = 0, - }, -}; +#include <asm/io.h> static void __init voyagergx_serial_init(void) { @@ -45,32 +25,96 @@ static void __init voyagergx_serial_init(void) /* * GPIO Control */ - val = inl(GPIO_MUX_HIGH); + val = readl((void __iomem *)GPIO_MUX_HIGH); val |= 0x00001fe0; - outl(val, GPIO_MUX_HIGH); + writel(val, (void __iomem *)GPIO_MUX_HIGH); /* * Power Mode Gate */ - val = inl(POWER_MODE0_GATE); + val = readl((void __iomem *)POWER_MODE0_GATE); val |= (POWER_MODE0_GATE_U0 | POWER_MODE0_GATE_U1); - outl(val, POWER_MODE0_GATE); + writel(val, (void __iomem *)POWER_MODE0_GATE); - val = inl(POWER_MODE1_GATE); + val = readl((void __iomem *)POWER_MODE1_GATE); val |= (POWER_MODE1_GATE_U0 | POWER_MODE1_GATE_U1); - outl(val, POWER_MODE1_GATE); + writel(val, (void __iomem *)POWER_MODE1_GATE); } +static struct resource cf_ide_resources[] = { + [0] = { + .start = PA_AREA5_IO + 0x1000, + .end = PA_AREA5_IO + 0x1000 + 0x08 - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = PA_AREA5_IO + 0x80c, + .end = PA_AREA5_IO + 0x80c + 0x16 - 1, + .flags = IORESOURCE_MEM, + }, + [2] = { +#ifdef CONFIG_RTS7751R2D_REV11 + .start = 1, +#else + .start = 2, +#endif + .flags = IORESOURCE_IRQ, + }, +}; + +static struct pata_platform_info pata_info = { + .ioport_shift = 1, +}; + +static struct platform_device cf_ide_device = { + .name = "pata_platform", + .id = -1, + .num_resources = ARRAY_SIZE(cf_ide_resources), + .resource = cf_ide_resources, + .dev = { + .platform_data = &pata_info, + }, +}; + +static struct plat_serial8250_port uart_platform_data[] = { + { + .membase = (void __iomem *)VOYAGER_UART_BASE, + .mapbase = VOYAGER_UART_BASE, + .iotype = UPIO_MEM, + .irq = VOYAGER_UART0_IRQ, + .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, + .regshift = 2, + .uartclk = (9600 * 16), + } +}; + static struct platform_device uart_device = { .name = "serial8250", - .id = -1, + .id = PLAT8250_DEV_PLATFORM, .dev = { .platform_data = uart_platform_data, }, }; +static struct resource heartbeat_resources[] = { + [0] = { + .start = PA_OUTPORT, + .end = PA_OUTPORT + 8 - 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device heartbeat_device = { + .name = "heartbeat", + .id = -1, + .num_resources = ARRAY_SIZE(heartbeat_resources), + .resource = heartbeat_resources, +}; + static struct platform_device *rts7751r2d_devices[] __initdata = { &uart_device, + &heartbeat_device, + &cf_ide_device, }; static int __init rts7751r2d_devices_setup(void) @@ -78,6 +122,7 @@ static int __init rts7751r2d_devices_setup(void) return platform_add_devices(rts7751r2d_devices, ARRAY_SIZE(rts7751r2d_devices)); } +__initcall(rts7751r2d_devices_setup); static void rts7751r2d_power_off(void) { @@ -89,14 +134,17 @@ static void rts7751r2d_power_off(void) */ static void __init rts7751r2d_setup(char **cmdline_p) { - device_initcall(rts7751r2d_devices_setup); + u16 ver = ctrl_inw(PA_VERREG); + + printk(KERN_INFO "Renesas Technology Sales RTS7751R2D support.\n"); + + printk(KERN_INFO "FPGA version:%d (revision:%d)\n", + (ver >> 4) & 0xf, ver & 0xf); ctrl_outw(0x0000, PA_OUTPORT); pm_power_off = rts7751r2d_power_off; voyagergx_serial_init(); - - printk(KERN_INFO "Renesas Technology Sales RTS7751R2D support.\n"); } /* @@ -107,31 +155,7 @@ struct sh_machine_vector mv_rts7751r2d __initmv = { .mv_setup = rts7751r2d_setup, .mv_nr_irqs = 72, - .mv_inb = rts7751r2d_inb, - .mv_inw = rts7751r2d_inw, - .mv_inl = rts7751r2d_inl, - .mv_outb = rts7751r2d_outb, - .mv_outw = rts7751r2d_outw, - .mv_outl = rts7751r2d_outl, - - .mv_inb_p = rts7751r2d_inb_p, - .mv_inw_p = rts7751r2d_inw, - .mv_inl_p = rts7751r2d_inl, - .mv_outb_p = rts7751r2d_outb_p, - .mv_outw_p = rts7751r2d_outw, - .mv_outl_p = rts7751r2d_outl, - - .mv_insb = rts7751r2d_insb, - .mv_insw = rts7751r2d_insw, - .mv_insl = rts7751r2d_insl, - .mv_outsb = rts7751r2d_outsb, - .mv_outsw = rts7751r2d_outsw, - .mv_outsl = rts7751r2d_outsl, - .mv_init_irq = init_rts7751r2d_IRQ, -#ifdef CONFIG_HEARTBEAT - .mv_heartbeat = heartbeat_rts7751r2d, -#endif .mv_irq_demux = rts7751r2d_irq_demux, #ifdef CONFIG_USB_SM501 diff --git a/arch/sh/boards/se/7206/Makefile b/arch/sh/boards/se/7206/Makefile index 63950f4f245..63e7ed699f3 100644 --- a/arch/sh/boards/se/7206/Makefile +++ b/arch/sh/boards/se/7206/Makefile @@ -3,5 +3,3 @@ # obj-y := setup.o io.o irq.o -obj-$(CONFIG_HEARTBEAT) += led.o - diff --git a/arch/sh/boards/se/7206/led.c b/arch/sh/boards/se/7206/led.c deleted file mode 100644 index ef794601ab8..00000000000 --- a/arch/sh/boards/se/7206/led.c +++ /dev/null @@ -1,57 +0,0 @@ -/* - * linux/arch/sh/kernel/led_se.c - * - * Copyright (C) 2000 Stuart Menefy <stuart.menefy@st.com> - * - * May be copied or modified under the terms of the GNU General Public - * License. See linux/COPYING for more information. - * - * This file contains Solution Engine specific LED code. - */ - -#include <linux/config.h> -#include <asm/se7206.h> - -#ifdef CONFIG_HEARTBEAT - -#include <linux/sched.h> - -/* Cycle the LED's in the clasic Knightrider/Sun pattern */ -void heartbeat_se(void) -{ - static unsigned int cnt = 0, period = 0; - volatile unsigned short* p = (volatile unsigned short*)PA_LED; - static unsigned bit = 0, up = 1; - - cnt += 1; - if (cnt < period) { - return; - } - - cnt = 0; - - /* Go through the points (roughly!): - * f(0)=10, f(1)=16, f(2)=20, f(5)=35,f(inf)->110 - */ - period = 110 - ( (300<<FSHIFT)/ - ((avenrun[0]/5) + (3<<FSHIFT)) ); - - if (up) { - if (bit == 7) { - bit--; - up=0; - } else { - bit ++; - } - } else { - if (bit == 0) { - bit++; - up=1; - } else { - bit--; - } - } - *p = 1<<(bit+8); - -} -#endif /* CONFIG_HEARTBEAT */ diff --git a/arch/sh/boards/se/7206/setup.c b/arch/sh/boards/se/7206/setup.c index 0f42e91a323..ca714879f55 100644 --- a/arch/sh/boards/se/7206/setup.c +++ b/arch/sh/boards/se/7206/setup.c @@ -3,6 +3,7 @@ * linux/arch/sh/boards/se/7206/setup.c * * Copyright (C) 2006 Yoshinori Sato + * Copyright (C) 2007 Paul Mundt * * Hitachi 7206 SolutionEngine Support. * @@ -34,15 +35,37 @@ static struct platform_device smc91x_device = { .resource = smc91x_resources, }; +static unsigned char heartbeat_bit_pos[] = { 8, 9, 10, 11, 12, 13, 14, 15 }; + +static struct resource heartbeat_resources[] = { + [0] = { + .start = PA_LED, + .end = PA_LED + ARRAY_SIZE(heartbeat_bit_pos) - 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device heartbeat_device = { + .name = "heartbeat", + .id = -1, + .dev = { + .platform_data = heartbeat_bit_pos, + }, + .num_resources = ARRAY_SIZE(heartbeat_resources), + .resource = heartbeat_resources, +}; + +static struct platform_device *se7206_devices[] __initdata = { + &smc91x_device, + &heartbeat_device, +}; + static int __init se7206_devices_setup(void) { - return platform_device_register(&smc91x_device); + return platform_add_devices(se7206_devices, ARRAY_SIZE(se7206_devices)); } - __initcall(se7206_devices_setup); -void heartbeat_se(void); - /* * The Machine Vector */ @@ -72,8 +95,5 @@ struct sh_machine_vector mv_se __initmv = { .mv_outsl = se7206_outsl, .mv_init_irq = init_se7206_IRQ, -#ifdef CONFIG_HEARTBEAT - .mv_heartbeat = heartbeat_se, -#endif }; ALIAS_MV(se) diff --git a/arch/sh/boards/se/7300/Makefile b/arch/sh/boards/se/7300/Makefile index 0fbd4f47815..46247368f14 100644 --- a/arch/sh/boards/se/7300/Makefile +++ b/arch/sh/boards/se/7300/Makefile @@ -3,5 +3,3 @@ # obj-y := setup.o io.o irq.o - -obj-$(CONFIG_HEARTBEAT) += led.o diff --git a/arch/sh/boards/se/7300/led.c b/arch/sh/boards/se/7300/led.c deleted file mode 100644 index 4d03bb7774b..00000000000 --- a/arch/sh/boards/se/7300/led.c +++ /dev/null @@ -1,54 +0,0 @@ -/* - * linux/arch/sh/boards/se/7300/led.c - * - * Derived from linux/arch/sh/boards/se/770x/led.c - * - * Copyright (C) 2000 Stuart Menefy <stuart.menefy@st.com> - * - * May be copied or modified under the terms of the GNU General Public - * License. See linux/COPYING for more information. - * - * This file contains Solution Engine specific LED code. - */ - -#include <linux/sched.h> -#include <asm/se7300.h> - -/* Cycle the LED's in the clasic Knightrider/Sun pattern */ -void heartbeat_7300se(void) -{ - static unsigned int cnt = 0, period = 0; - volatile unsigned short *p = (volatile unsigned short *) PA_LED; - static unsigned bit = 0, up = 1; - - cnt += 1; - if (cnt < period) { - return; - } - - cnt = 0; - - /* Go through the points (roughly!): - * f(0)=10, f(1)=16, f(2)=20, f(5)=35,f(inf)->110 - */ - period = 110 - ((300 << FSHIFT) / ((avenrun[0] / 5) + (3 << FSHIFT))); - - if (up) { - if (bit == 7) { - bit--; - up = 0; - } else { - bit++; - } - } else { - if (bit == 0) { - bit++; - up = 1; - } else { - bit--; - } - } - *p = 1 << (bit + 8); - -} - diff --git a/arch/sh/boards/se/7300/setup.c b/arch/sh/boards/se/7300/setup.c index 6f082a722d4..f1960956bad 100644 --- a/arch/sh/boards/se/7300/setup.c +++ b/arch/sh/boards/se/7300/setup.c @@ -6,14 +6,43 @@ * SH-Mobile SolutionEngine 7300 Support. * */ - #include <linux/init.h> +#include <linux/platform_device.h> #include <asm/machvec.h> #include <asm/se7300.h> -void heartbeat_7300se(void); void init_7300se_IRQ(void); +static unsigned char heartbeat_bit_pos[] = { 8, 9, 10, 11, 12, 13, 14, 15 }; + +static struct resource heartbeat_resources[] = { + [0] = { + .start = PA_LED, + .end = PA_LED + ARRAY_SIZE(heartbeat_bit_pos) - 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device heartbeat_device = { + .name = "heartbeat", + .id = -1, + .dev = { + .platform_data = heartbeat_bit_pos, + }, + .num_resources = ARRAY_SIZE(heartbeat_resources), + .resource = heartbeat_resources, +}; + +static struct platform_device *se7300_devices[] __initdata = { + &heartbeat_device, +}; + +static int __init se7300_devices_setup(void) +{ + return platform_add_devices(se7300_devices, ARRAY_SIZE(se7300_devices)); +} +__initcall(se7300_devices_setup); + /* * The Machine Vector */ @@ -42,8 +71,5 @@ struct sh_machine_vector mv_7300se __initmv = { .mv_outsl = sh7300se_outsl, .mv_init_irq = init_7300se_IRQ, -#ifdef CONFIG_HEARTBEAT - .mv_heartbeat = heartbeat_7300se, -#endif }; ALIAS_MV(7300se) diff --git a/arch/sh/boards/se/73180/Makefile b/arch/sh/boards/se/73180/Makefile index 8f63886a0f3..e7c09967c52 100644 --- a/arch/sh/boards/se/73180/Makefile +++ b/arch/sh/boards/se/73180/Makefile @@ -3,5 +3,3 @@ # obj-y := setup.o io.o irq.o - -obj-$(CONFIG_HEARTBEAT) += led.o diff --git a/arch/sh/boards/se/73180/led.c b/arch/sh/boards/se/73180/led.c deleted file mode 100644 index 4b72e9a3ead..00000000000 --- a/arch/sh/boards/se/73180/led.c +++ /dev/null @@ -1,53 +0,0 @@ -/* - * arch/sh/boards/se/73180/led.c - * - * Derived from arch/sh/boards/se/770x/led.c - * - * Copyright (C) 2000 Stuart Menefy <stuart.menefy@st.com> - * - * May be copied or modified under the terms of the GNU General Public - * License. See linux/COPYING for more information. - * - * This file contains Solution Engine specific LED code. - */ - -#include <linux/sched.h> -#include <asm/mach/se73180.h> - -/* Cycle the LED's in the clasic Knightrider/Sun pattern */ -void heartbeat_73180se(void) -{ - static unsigned int cnt = 0, period = 0; - volatile unsigned short *p = (volatile unsigned short *) PA_LED; - static unsigned bit = 0, up = 1; - - cnt += 1; - if (cnt < period) { - return; - } - - cnt = 0; - - /* Go through the points (roughly!): - * f(0)=10, f(1)=16, f(2)=20, f(5)=35,f(inf)->110 - */ - period = 110 - ((300 << FSHIFT) / ((avenrun[0] / 5) + (3 << FSHIFT))); - - if (up) { - if (bit == 7) { - bit--; - up = 0; - } else { - bit++; - } - } else { - if (bit == 0) { - bit++; - up = 1; - } else { - bit--; - } - } - *p = 1 << (bit + LED_SHIFT); - -} diff --git a/arch/sh/boards/se/73180/setup.c b/arch/sh/boards/se/73180/setup.c index b38ef50a160..911ce1cdbd7 100644 --- a/arch/sh/boards/se/73180/setup.c +++ b/arch/sh/boards/se/73180/setup.c @@ -10,13 +10,39 @@ */ #include <linux/init.h> +#include <linux/platform_device.h> #include <asm/machvec.h> #include <asm/se73180.h> #include <asm/irq.h> -void heartbeat_73180se(void); void init_73180se_IRQ(void); +static struct resource heartbeat_resources[] = { + [0] = { + .start = PA_LED, + .end = PA_LED + 8 - 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device heartbeat_device = { + .name = "heartbeat", + .id = -1, + .num_resources = ARRAY_SIZE(heartbeat_resources), + .resource = heartbeat_resources, +}; + +static struct platform_device *se73180_devices[] __initdata = { + &heartbeat_device, +}; + +static int __init se73180_devices_setup(void) +{ + return platform_add_devices(sh7343se_platform_devices, + ARRAY_SIZE(sh7343se_platform_devices)); +} +__initcall(se73180_devices_setup); + /* * The Machine Vector */ @@ -46,8 +72,5 @@ struct sh_machine_vector mv_73180se __initmv = { .mv_init_irq = init_73180se_IRQ, .mv_irq_demux = shmse_irq_demux, -#ifdef CONFIG_HEARTBEAT - .mv_heartbeat = heartbeat_73180se, -#endif }; ALIAS_MV(73180se) diff --git a/arch/sh/boards/se/7343/Makefile b/arch/sh/boards/se/7343/Makefile index 4291069c0b4..3024796c620 100644 --- a/arch/sh/boards/se/7343/Makefile +++ b/arch/sh/boards/se/7343/Makefile @@ -3,5 +3,3 @@ # obj-y := setup.o io.o irq.o - -obj-$(CONFIG_HEARTBEAT) += led.o diff --git a/arch/sh/boards/se/7343/led.c b/arch/sh/boards/se/7343/led.c deleted file mode 100644 index 6b39e191c42..00000000000 --- a/arch/sh/boards/se/7343/led.c +++ /dev/null @@ -1,44 +0,0 @@ -/* - * arch/sh/boards/se/7343/led.c - * - */ -#include <linux/sched.h> -#include <asm/mach/se7343.h> - -/* Cycle the LED's in the clasic Knightrider/Sun pattern */ -void heartbeat_7343se(void) -{ - static unsigned int cnt = 0, period = 0; - volatile unsigned short *p = (volatile unsigned short *) PA_LED; - static unsigned bit = 0, up = 1; - - cnt += 1; - if (cnt < period) { - return; - } - - cnt = 0; - - /* Go through the points (roughly!): - * f(0)=10, f(1)=16, f(2)=20, f(5)=35,f(inf)->110 - */ - period = 110 - ((300 << FSHIFT) / ((avenrun[0] / 5) + (3 << FSHIFT))); - - if (up) { - if (bit == 7) { - bit--; - up = 0; - } else { - bit++; - } - } else { - if (bit == 0) { - bit++; - up = 1; - } else { - bit--; - } - } - *p = 1 << (bit + LED_SHIFT); - -} diff --git a/arch/sh/boards/se/7343/setup.c b/arch/sh/boards/se/7343/setup.c index c7d17fe7764..3fdb16f2cef 100644 --- a/arch/sh/boards/se/7343/setup.c +++ b/arch/sh/boards/se/7343/setup.c @@ -4,7 +4,6 @@ #include <asm/mach/se7343.h> #include <asm/irq.h> -void heartbeat_7343se(void); void init_7343se_IRQ(void); static struct resource smc91x_resources[] = { @@ -31,14 +30,30 @@ static struct platform_device smc91x_device = { .resource = smc91x_resources, }; -static struct platform_device *smc91x_platform_devices[] __initdata = { +static struct resource heartbeat_resources[] = { + [0] = { + .start = PA_LED, + .end = PA_LED + 8 - 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device heartbeat_device = { + .name = "heartbeat", + .id = -1, + .num_resources = ARRAY_SIZE(heartbeat_resources), + .resource = heartbeat_resources, +}; + +static struct platform_device *sh7343se_platform_devices[] __initdata = { &smc91x_device, + &heartbeat_device, }; static int __init sh7343se_devices_setup(void) { - return platform_add_devices(smc91x_platform_devices, - ARRAY_SIZE(smc91x_platform_devices)); + return platform_add_devices(sh7343se_platform_devices, + ARRAY_SIZE(sh7343se_platform_devices)); } static void __init sh7343se_setup(char **cmdline_p) @@ -76,8 +91,5 @@ struct sh_machine_vector mv_7343se __initmv = { .mv_init_irq = init_7343se_IRQ, .mv_irq_demux = shmse_irq_demux, -#ifdef CONFIG_HEARTBEAT - .mv_heartbeat = heartbeat_7343se, -#endif }; ALIAS_MV(7343se) diff --git a/arch/sh/boards/se/770x/Makefile b/arch/sh/boards/se/770x/Makefile index 9a5035f80ec..8e624b06d5e 100644 --- a/arch/sh/boards/se/770x/Makefile +++ b/arch/sh/boards/se/770x/Makefile @@ -3,4 +3,3 @@ # obj-y := setup.o io.o irq.o -obj-$(CONFIG_HEARTBEAT) += led.o diff --git a/arch/sh/boards/se/770x/irq.c b/arch/sh/boards/se/770x/irq.c index fcd7cd7fa05..307ca5da623 100644 --- a/arch/sh/boards/se/770x/irq.c +++ b/arch/sh/boards/se/770x/irq.c @@ -2,56 +2,96 @@ * linux/arch/sh/boards/se/770x/irq.c * * Copyright (C) 2000 Kazumoto Kojima + * Copyright (C) 2006 Nobuhiro Iwamatsu * * Hitachi SolutionEngine Support. * */ #include <linux/init.h> +#include <linux/interrupt.h> #include <linux/irq.h> #include <asm/irq.h> #include <asm/io.h> #include <asm/se.h> +/* + * If the problem of make_ipr_irq is solved, + * this code will become unnecessary. :-) + */ +static void se770x_disable_ipr_irq(unsigned int irq) +{ + struct ipr_data *p = get_irq_chip_data(irq); + + ctrl_outw(ctrl_inw(p->addr) & (0xffff ^ (0xf << p->shift)), p->addr); +} + +static void se770x_enable_ipr_irq(unsigned int irq) +{ + struct ipr_data *p = get_irq_chip_data(irq); + + ctrl_outw(ctrl_inw(p->addr) | (p->priority << p->shift), p->addr); +} + +static struct irq_chip se770x_irq_chip = { + .name = "MS770xSE-FPGA", + .mask = se770x_disable_ipr_irq, + .unmask = se770x_enable_ipr_irq, + .mask_ack = se770x_disable_ipr_irq, +}; + +void make_se770x_irq(struct ipr_data *table, unsigned int nr_irqs) +{ + int i; + + for (i = 0; i < nr_irqs; i++) { + unsigned int irq = table[i].irq; + disable_irq_nosync(irq); + set_irq_chip_and_handler_name(irq, &se770x_irq_chip, + handle_level_irq, "level"); + set_irq_chip_data(irq, &table[i]); + se770x_enable_ipr_irq(irq); + } +} + static struct ipr_data se770x_ipr_map[] = { #if defined(CONFIG_CPU_SUBTYPE_SH7705) /* This is default value */ - { 0xf-0x2, BCR_ILCRA, 2, 0x2 }, - { 0xf-0xa, BCR_ILCRA, 1, 0xa }, - { 0xf-0x5, BCR_ILCRB, 0, 0x5 }, - { 0xf-0x8, BCR_ILCRC, 1, 0x8 }, - { 0xf-0xc, BCR_ILCRC, 0, 0xc }, - { 0xf-0xe, BCR_ILCRD, 3, 0xe }, - { 0xf-0x3, BCR_ILCRD, 1, 0x3 }, /* LAN */ - { 0xf-0xd, BCR_ILCRE, 2, 0xd }, - { 0xf-0x9, BCR_ILCRE, 1, 0x9 }, - { 0xf-0x1, BCR_ILCRE, 0, 0x1 }, - { 0xf-0xf, BCR_ILCRF, 3, 0xf }, - { 0xf-0xb, BCR_ILCRF, 1, 0xb }, - { 0xf-0x7, BCR_ILCRG, 3, 0x7 }, - { 0xf-0x6, BCR_ILCRG, 2, 0x6 }, - { 0xf-0x4, BCR_ILCRG, 1, 0x4 }, + { 0xf-0x2, 0, 8, 0x2 , BCR_ILCRA}, + { 0xf-0xa, 0, 4, 0xa , BCR_ILCRA}, + { 0xf-0x5, 0, 0, 0x5 , BCR_ILCRB}, + { 0xf-0x8, 0, 4, 0x8 , BCR_ILCRC}, + { 0xf-0xc, 0, 0, 0xc , BCR_ILCRC}, + { 0xf-0xe, 0, 12, 0xe , BCR_ILCRD}, + { 0xf-0x3, 0, 4, 0x3 , BCR_ILCRD}, /* LAN */ + { 0xf-0xd, 0, 8, 0xd , BCR_ILCRE}, + { 0xf-0x9, 0, 4, 0x9 , BCR_ILCRE}, + { 0xf-0x1, 0, 0, 0x1 , BCR_ILCRE}, + { 0xf-0xf, 0, 12, 0xf , BCR_ILCRF}, + { 0xf-0xb, 0, 4, 0xb , BCR_ILCRF}, + { 0xf-0x7, 0, 12, 0x7 , BCR_ILCRG}, + { 0xf-0x6, 0, 8, 0x6 , BCR_ILCRG}, + { 0xf-0x4, 0, 4, 0x4 , BCR_ILCRG}, #else - { 14, BCR_ILCRA, 2, 0x0f-14 }, - { 12, BCR_ILCRA, 1, 0x0f-12 }, - { 8, BCR_ILCRB, 1, 0x0f- 8 }, - { 6, BCR_ILCRC, 3, 0x0f- 6 }, - { 5, BCR_ILCRC, 2, 0x0f- 5 }, - { 4, BCR_ILCRC, 1, 0x0f- 4 }, - { 3, BCR_ILCRC, 0, 0x0f- 3 }, - { 1, BCR_ILCRD, 3, 0x0f- 1 }, - - { 10, BCR_ILCRD, 1, 0x0f-10 }, /* LAN */ - - { 0, BCR_ILCRE, 3, 0x0f- 0 }, /* PCIRQ3 */ - { 11, BCR_ILCRE, 2, 0x0f-11 }, /* PCIRQ2 */ - { 9, BCR_ILCRE, 1, 0x0f- 9 }, /* PCIRQ1 */ - { 7, BCR_ILCRE, 0, 0x0f- 7 }, /* PCIRQ0 */ - + { 14, 0, 8, 0x0f-14 ,BCR_ILCRA}, + { 12, 0, 4, 0x0f-12 ,BCR_ILCRA}, + { 8, 0, 4, 0x0f- 8 ,BCR_ILCRB}, + { 6, 0, 12, 0x0f- 6 ,BCR_ILCRC}, + { 5, 0, 8, 0x0f- 5 ,BCR_ILCRC}, + { 4, 0, 4, 0x0f- 4 ,BCR_ILCRC}, + { 3, 0, 0, 0x0f- 3 ,BCR_ILCRC}, + { 1, 0, 12, 0x0f- 1 ,BCR_ILCRD}, + /* ST NIC */ + { 10, 0, 4, 0x0f-10 ,BCR_ILCRD}, /* LAN */ + /* MRSHPC IRQs setting */ + { 0, 0, 12, 0x0f- 0 ,BCR_ILCRE}, /* PCIRQ3 */ + { 11, 0, 8, 0x0f-11 ,BCR_ILCRE}, /* PCIRQ2 */ + { 9, 0, 4, 0x0f- 9 ,BCR_ILCRE}, /* PCIRQ1 */ + { 7, 0, 0, 0x0f- 7 ,BCR_ILCRE}, /* PCIRQ0 */ /* #2, #13 are allocated for SLOT IRQ #1 and #2 (for now) */ /* NOTE: #2 and #13 are not used on PC */ - { 13, BCR_ILCRG, 1, 0x0f-13 }, /* SLOTIRQ2 */ - { 2, BCR_ILCRG, 0, 0x0f- 2 }, /* SLOTIRQ1 */ + { 13, 0, 4, 0x0f-13 ,BCR_ILCRG}, /* SLOTIRQ2 */ + { 2, 0, 0, 0x0f- 2 ,BCR_ILCRG}, /* SLOTIRQ1 */ #endif }; @@ -81,5 +121,5 @@ void __init init_se_IRQ(void) ctrl_outw(0, BCR_ILCRF); ctrl_outw(0, BCR_ILCRG); #endif - make_ipr_irq(se770x_ipr_map, ARRAY_SIZE(se770x_ipr_map)); + make_se770x_irq(se770x_ipr_map, ARRAY_SIZE(se770x_ipr_map)); } diff --git a/arch/sh/boards/se/770x/led.c b/arch/sh/boards/se/770x/led.c deleted file mode 100644 index d93dd831b2a..00000000000 --- a/arch/sh/boards/se/770x/led.c +++ /dev/null @@ -1,52 +0,0 @@ -/* - * linux/arch/sh/boards/se/770x/led.c - * - * Copyright (C) 2000 Stuart Menefy <stuart.menefy@st.com> - * - * May be copied or modified under the terms of the GNU General Public - * License. See linux/COPYING for more information. - * - * This file contains Solution Engine specific LED code. - */ - -#include <linux/sched.h> -#include <asm/se.h> - -/* Cycle the LED's in the clasic Knightrider/Sun pattern */ -void heartbeat_se(void) -{ - static unsigned int cnt = 0, period = 0; - volatile unsigned short* p = (volatile unsigned short*)PA_LED; - static unsigned bit = 0, up = 1; - - cnt += 1; - if (cnt < period) { - return; - } - - cnt = 0; - - /* Go through the points (roughly!): - * f(0)=10, f(1)=16, f(2)=20, f(5)=35,f(inf)->110 - */ - period = 110 - ( (300<<FSHIFT)/ - ((avenrun[0]/5) + (3<<FSHIFT)) ); - - if (up) { - if (bit == 7) { - bit--; - up=0; - } else { - bit ++; - } - } else { - if (bit == 0) { - bit++; - up=1; - } else { - bit--; - } - } - *p = 1<<(bit+8); - -} diff --git a/arch/sh/boards/se/770x/setup.c b/arch/sh/boards/se/770x/setup.c index a1d51d5fa92..45cbc36b9fb 100644 --- a/arch/sh/boards/se/770x/setup.c +++ b/arch/sh/boards/se/770x/setup.c @@ -1,5 +1,4 @@ -/* $Id: setup.c,v 1.1.2.4 2002/03/02 21:57:07 lethal Exp $ - * +/* * linux/arch/sh/boards/se/770x/setup.c * * Copyright (C) 2000 Kazumoto Kojima @@ -8,12 +7,12 @@ * */ #include <linux/init.h> +#include <linux/platform_device.h> #include <asm/machvec.h> #include <asm/se.h> #include <asm/io.h> #include <asm/smc37c93x.h> -void heartbeat_se(void); void init_se_IRQ(void); /* @@ -36,11 +35,6 @@ static void __init smsc_setup(char **cmdline_p) smsc_config(ACTIVATE_INDEX, 0x01); smsc_config(IRQ_SELECT_INDEX, 6); /* IRQ6 */ - /* IDE1 */ - smsc_config(CURRENT_LDN_INDEX, LDN_IDE1); - smsc_config(ACTIVATE_INDEX, 0x01); - smsc_config(IRQ_SELECT_INDEX, 14); /* IRQ14 */ - /* AUXIO (GPIO): to use IDE1 */ smsc_config(CURRENT_LDN_INDEX, LDN_AUXIO); smsc_config(GPIO46_INDEX, 0x00); /* nIOROP */ @@ -69,6 +63,36 @@ static void __init smsc_setup(char **cmdline_p) outb_p(CONFIG_EXIT, CONFIG_PORT); } +static unsigned char heartbeat_bit_pos[] = { 8, 9, 10, 11, 12, 13, 14, 15 }; + +static struct resource heartbeat_resources[] = { + [0] = { + .start = PA_LED, + .end = PA_LED + ARRAY_SIZE(heartbeat_bit_pos) - 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device heartbeat_device = { + .name = "heartbeat", + .id = -1, + .dev = { + .platform_data = heartbeat_bit_pos, + }, + .num_resources = ARRAY_SIZE(heartbeat_resources), + .resource = heartbeat_resources, +}; + +static struct platform_device *se_devices[] __initdata = { + &heartbeat_device, +}; + +static int __init se_devices_setup(void) +{ + return platform_add_devices(se_devices, ARRAY_SIZE(se_devices)); +} +__initcall(se_devices_setup); + /* * The Machine Vector */ @@ -107,8 +131,5 @@ struct sh_machine_vector mv_se __initmv = { .mv_outsl = se_outsl, .mv_init_irq = init_se_IRQ, -#ifdef CONFIG_HEARTBEAT - .mv_heartbeat = heartbeat_se, -#endif }; ALIAS_MV(se) diff --git a/arch/sh/boards/se/7751/Makefile b/arch/sh/boards/se/7751/Makefile index 188900c4832..dbc29f3a9de 100644 --- a/arch/sh/boards/se/7751/Makefile +++ b/arch/sh/boards/se/7751/Makefile @@ -5,4 +5,3 @@ obj-y := setup.o io.o irq.o obj-$(CONFIG_PCI) += pci.o -obj-$(CONFIG_HEARTBEAT) += led.o diff --git a/arch/sh/boards/se/7751/led.c b/arch/sh/boards/se/7751/led.c deleted file mode 100644 index de4194d97c8..00000000000 --- a/arch/sh/boards/se/7751/led.c +++ /dev/null @@ -1,51 +0,0 @@ -/* - * linux/arch/sh/boards/se/7751/led.c - * - * Copyright (C) 2000 Stuart Menefy <stuart.menefy@st.com> - * - * May be copied or modified under the terms of the GNU General Public - * License. See linux/COPYING for more information. - * - * This file contains Solution Engine specific LED code. - */ -#include <linux/sched.h> -#include <asm/se7751.h> - -/* Cycle the LED's in the clasic Knightrider/Sun pattern */ -void heartbeat_7751se(void) -{ - static unsigned int cnt = 0, period = 0; - volatile unsigned short* p = (volatile unsigned short*)PA_LED; - static unsigned bit = 0, up = 1; - - cnt += 1; - if (cnt < period) { - return; - } - - cnt = 0; - - /* Go through the points (roughly!): - * f(0)=10, f(1)=16, f(2)=20, f(5)=35,f(inf)->110 - */ - period = 110 - ( (300<<FSHIFT)/ - ((avenrun[0]/5) + (3<<FSHIFT)) ); - - if (up) { - if (bit == 7) { - bit--; - up=0; - } else { - bit ++; - } - } else { - if (bit == 0) { - bit++; - up=1; - } else { - bit--; - } - } - *p = 1<<(bit+8); - -} diff --git a/arch/sh/boards/se/7751/setup.c b/arch/sh/boards/se/7751/setup.c index f7e1dd39c83..e3feae6ec0b 100644 --- a/arch/sh/boards/se/7751/setup.c +++ b/arch/sh/boards/se/7751/setup.c @@ -9,11 +9,11 @@ * Ian da Silva and Jeremy Siegel, 2001. */ #include <linux/init.h> +#include <linux/platform_device.h> #include <asm/machvec.h> #include <asm/se7751.h> #include <asm/io.h> -void heartbeat_7751se(void); void init_7751se_IRQ(void); #ifdef CONFIG_SH_KGDB @@ -161,11 +161,40 @@ static int kgdb_uart_setup(void) } #endif /* CONFIG_SH_KGDB */ +static unsigned char heartbeat_bit_pos[] = { 8, 9, 10, 11, 12, 13, 14, 15 }; + +static struct resource heartbeat_resources[] = { + [0] = { + .start = PA_LED, + .end = PA_LED + ARRAY_SIZE(heartbeat_bit_pos) - 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device heartbeat_device = { + .name = "heartbeat", + .id = -1, + .dev = { + .platform_data = heartbeat_bit_pos, + }, + .num_resources = ARRAY_SIZE(heartbeat_resources), + .resource = heartbeat_resources, +}; + +static struct platform_device *se7751_devices[] __initdata = { + &smc91x_device, + &heartbeat_device, +}; + +static int __init se7751_devices_setup(void) +{ + return platform_add_devices(se7751_devices, ARRAY_SIZE(se7751_devices)); +} +__initcall(se7751_devices_setup); /* * The Machine Vector */ - struct sh_machine_vector mv_7751se __initmv = { .mv_name = "7751 SolutionEngine", .mv_setup = sh7751se_setup, @@ -189,8 +218,5 @@ struct sh_machine_vector mv_7751se __initmv = { .mv_outsl = sh7751se_outsl, .mv_init_irq = init_7751se_IRQ, -#ifdef CONFIG_HEARTBEAT - .mv_heartbeat = heartbeat_7751se, -#endif }; ALIAS_MV(7751se) diff --git a/arch/sh/boards/sh03/Makefile b/arch/sh/boards/sh03/Makefile index 321be50e36a..400306a796e 100644 --- a/arch/sh/boards/sh03/Makefile +++ b/arch/sh/boards/sh03/Makefile @@ -3,4 +3,3 @@ # obj-y := setup.o rtc.o -obj-$(CONFIG_HEARTBEAT) += led.o diff --git a/arch/sh/boards/sh03/led.c b/arch/sh/boards/sh03/led.c deleted file mode 100644 index d38562ad6be..00000000000 --- a/arch/sh/boards/sh03/led.c +++ /dev/null @@ -1,48 +0,0 @@ -/* - * linux/arch/sh/boards/sh03/led.c - * - * Copyright (C) 2004 Saito.K Interface Corporation. - * - * This file contains Interface CTP/PCI-SH03 specific LED code. - */ - -#include <linux/sched.h> - -/* Cycle the LED's in the clasic Knightrider/Sun pattern */ -void heartbeat_sh03(void) -{ - static unsigned int cnt = 0, period = 0; - volatile unsigned char* p = (volatile unsigned char*)0xa0800000; - static unsigned bit = 0, up = 1; - - cnt += 1; - if (cnt < period) { - return; - } - - cnt = 0; - - /* Go through the points (roughly!): - * f(0)=10, f(1)=16, f(2)=20, f(5)=35,f(inf)->110 - */ - period = 110 - ( (300<<FSHIFT)/ - ((avenrun[0]/5) + (3<<FSHIFT)) ); - - if (up) { - if (bit == 7) { - bit--; - up=0; - } else { - bit ++; - } - } else { - if (bit == 0) { - bit++; - up=1; - } else { - bit--; - } - } - *p = 1<<bit; - -} diff --git a/arch/sh/boards/sh03/setup.c b/arch/sh/boards/sh03/setup.c index 5ad1e19771b..c069c444b4e 100644 --- a/arch/sh/boards/sh03/setup.c +++ b/arch/sh/boards/sh03/setup.c @@ -8,6 +8,7 @@ #include <linux/init.h> #include <linux/irq.h> #include <linux/pci.h> +#include <linux/platform_device.h> #include <asm/io.h> #include <asm/rtc.h> #include <asm/sh03/io.h> @@ -48,15 +49,36 @@ static void __init sh03_setup(char **cmdline_p) board_time_init = sh03_time_init; } +static struct resource heartbeat_resources[] = { + [0] = { + .start = 0xa0800000, + .end = 0xa0800000 + 8 - 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device heartbeat_device = { + .name = "heartbeat", + .id = -1, + .num_resources = ARRAY_SIZE(heartbeat_resources), + .resource = heartbeat_resources, +}; + +static struct platform_device *sh03_devices[] __initdata = { + &heartbeat_device, +}; + +static int __init sh03_devices_setup(void) +{ + return platform_add_devices(sh03_devices, ARRAY_SIZE(sh03_devices)); +} +__initcall(sh03_devices_setup); + struct sh_machine_vector mv_sh03 __initmv = { .mv_name = "Interface (CTP/PCI-SH03)", .mv_setup = sh03_setup, .mv_nr_irqs = 48, .mv_ioport_map = sh03_ioport_map, .mv_init_irq = init_sh03_IRQ, - -#ifdef CONFIG_HEARTBEAT - .mv_heartbeat = heartbeat_sh03, -#endif }; ALIAS_MV(sh03) diff --git a/arch/sh/boards/shmin/setup.c b/arch/sh/boards/shmin/setup.c index a31a1d1e268..4a9df4a6b03 100644 --- a/arch/sh/boards/shmin/setup.c +++ b/arch/sh/boards/shmin/setup.c @@ -12,12 +12,22 @@ #include <asm/irq.h> #include <asm/io.h> -#define PFC_PHCR 0xa400010e +#define PFC_PHCR 0xa400010eUL +#define INTC_ICR1 0xa4000010UL +#define INTC_IPRC 0xa4000016UL + +static struct ipr_data shmin_ipr_map[] = { + { .irq=32, .addr=INTC_IPRC, .shift= 0, .priority=0 }, + { .irq=33, .addr=INTC_IPRC, .shift= 4, .priority=0 }, + { .irq=34, .addr=INTC_IPRC, .shift= 8, .priority=8 }, + { .irq=35, .addr=INTC_IPRC, .shift=12, .priority=0 }, +}; static void __init init_shmin_irq(void) { ctrl_outw(0x2a00, PFC_PHCR); // IRQ0-3=IRQ ctrl_outw(0x0aaa, INTC_ICR1); // IRQ0-3=IRQ-mode,Low-active. + make_ipr_irq(shmin_ipr_map, ARRAY_SIZE(shmin_ipr_map)); } static void __iomem *shmin_ioport_map(unsigned long port, unsigned int size) |