aboutsummaryrefslogtreecommitdiff
path: root/arch/sparc64/kernel
diff options
context:
space:
mode:
Diffstat (limited to 'arch/sparc64/kernel')
-rw-r--r--arch/sparc64/kernel/head.S549
-rw-r--r--arch/sparc64/kernel/setup.c15
-rw-r--r--arch/sparc64/kernel/trampoline.S16
3 files changed, 168 insertions, 412 deletions
diff --git a/arch/sparc64/kernel/head.S b/arch/sparc64/kernel/head.S
index dc3551f46b7..8b83520e427 100644
--- a/arch/sparc64/kernel/head.S
+++ b/arch/sparc64/kernel/head.S
@@ -80,15 +80,165 @@ sparc_ramdisk_image64:
.xword 0
.word _end
- /* We must be careful, 32-bit OpenBOOT will get confused if it
- * tries to save away a register window to a 64-bit kernel
- * stack address. Flush all windows, disable interrupts,
- * remap if necessary, jump onto kernel trap table, then kernel
- * stack, or else we die.
+ /* PROM cif handler code address is in %o4. */
+sparc64_boot:
+1: rd %pc, %g7
+ set 1b, %g1
+ cmp %g1, %g7
+ be,pn %xcc, sparc64_boot_after_remap
+ mov %o4, %l7
+
+ /* We need to remap the kernel. Use position independant
+ * code to remap us to KERNBASE.
*
- * PROM entry point is on %o4
+ * SILO can invoke us with 32-bit address masking enabled,
+ * so make sure that's clear.
*/
-sparc64_boot:
+ rdpr %pstate, %g1
+ andn %g1, PSTATE_AM, %g1
+ wrpr %g1, 0x0, %pstate
+ ba,a,pt %xcc, 1f
+
+ .globl prom_finddev_name, prom_chosen_path
+ .globl prom_getprop_name, prom_mmu_name
+ .globl prom_callmethod_name, prom_translate_name
+ .globl prom_map_name, prom_unmap_name, prom_mmu_ihandle_cache
+ .globl prom_boot_mapped_pc, prom_boot_mapping_mode
+ .globl prom_boot_mapping_phys_high, prom_boot_mapping_phys_low
+prom_finddev_name:
+ .asciz "finddevice"
+prom_chosen_path:
+ .asciz "/chosen"
+prom_getprop_name:
+ .asciz "getprop"
+prom_mmu_name:
+ .asciz "mmu"
+prom_callmethod_name:
+ .asciz "call-method"
+prom_translate_name:
+ .asciz "translate"
+prom_map_name:
+ .asciz "map"
+prom_unmap_name:
+ .asciz "unmap"
+ .align 4
+prom_mmu_ihandle_cache:
+ .word 0
+prom_boot_mapped_pc:
+ .word 0
+prom_boot_mapping_mode:
+ .word 0
+ .align 8
+prom_boot_mapping_phys_high:
+ .xword 0
+prom_boot_mapping_phys_low:
+ .xword 0
+1:
+ rd %pc, %l0
+ mov (1b - prom_finddev_name), %l1
+ mov (1b - prom_chosen_path), %l2
+ mov (1b - prom_boot_mapped_pc), %l3
+ sub %l0, %l1, %l1
+ sub %l0, %l2, %l2
+ sub %l0, %l3, %l3
+ stw %l0, [%l3]
+ sub %sp, (192 + 128), %sp
+
+ /* chosen_node = prom_finddevice("/chosen") */
+ stx %l1, [%sp + 2047 + 128 + 0x00] ! service, "finddevice"
+ mov 1, %l3
+ stx %l3, [%sp + 2047 + 128 + 0x08] ! num_args, 1
+ stx %l3, [%sp + 2047 + 128 + 0x10] ! num_rets, 1
+ stx %l2, [%sp + 2047 + 128 + 0x18] ! arg1, "/chosen"
+ stx %g0, [%sp + 2047 + 128 + 0x20] ! ret1
+ call %l7
+ add %sp, (2047 + 128), %o0 ! argument array
+
+ ldx [%sp + 2047 + 128 + 0x20], %l4 ! chosen device node
+
+ mov (1b - prom_getprop_name), %l1
+ mov (1b - prom_mmu_name), %l2
+ mov (1b - prom_mmu_ihandle_cache), %l5
+ sub %l0, %l1, %l1
+ sub %l0, %l2, %l2
+ sub %l0, %l5, %l5
+
+ /* prom_mmu_ihandle_cache = prom_getint(chosen_node, "mmu") */
+ stx %l1, [%sp + 2047 + 128 + 0x00] ! service, "getprop"
+ mov 4, %l3
+ stx %l3, [%sp + 2047 + 128 + 0x08] ! num_args, 4
+ mov 1, %l3
+ stx %l3, [%sp + 2047 + 128 + 0x10] ! num_rets, 1
+ stx %l4, [%sp + 2047 + 128 + 0x18] ! arg1, chosen_node
+ stx %l2, [%sp + 2047 + 128 + 0x20] ! arg2, "mmu"
+ stx %l5, [%sp + 2047 + 128 + 0x28] ! arg3, &prom_mmu_ihandle_cache
+ mov 4, %l3
+ stx %l3, [%sp + 2047 + 128 + 0x30] ! arg4, sizeof(arg3)
+ stx %g0, [%sp + 2047 + 128 + 0x38] ! ret1
+ call %l7
+ add %sp, (2047 + 128), %o0 ! argument array
+
+ mov (1b - prom_callmethod_name), %l1
+ mov (1b - prom_translate_name), %l2
+ sub %l0, %l1, %l1
+ sub %l0, %l2, %l2
+ lduw [%l5], %l5 ! prom_mmu_ihandle_cache
+
+ stx %l1, [%sp + 2047 + 128 + 0x00] ! service, "call-method"
+ mov 3, %l3
+ stx %l3, [%sp + 2047 + 128 + 0x08] ! num_args, 3
+ mov 5, %l3
+ stx %l3, [%sp + 2047 + 128 + 0x10] ! num_rets, 5
+ stx %l2, [%sp + 2047 + 128 + 0x18] ! arg1: "translate"
+ stx %l5, [%sp + 2047 + 128 + 0x20] ! arg2: prom_mmu_ihandle_cache
+ srlx %l0, 22, %l3
+ sllx %l3, 22, %l3
+ stx %l3, [%sp + 2047 + 128 + 0x28] ! arg3: vaddr, our PC
+ stx %g0, [%sp + 2047 + 128 + 0x30] ! res1
+ stx %g0, [%sp + 2047 + 128 + 0x38] ! res2
+ stx %g0, [%sp + 2047 + 128 + 0x40] ! res3
+ stx %g0, [%sp + 2047 + 128 + 0x48] ! res4
+ stx %g0, [%sp + 2047 + 128 + 0x50] ! res5
+ call %l7
+ add %sp, (2047 + 128), %o0 ! argument array
+
+ ldx [%sp + 2047 + 128 + 0x40], %l1 ! translation mode
+ mov (1b - prom_boot_mapping_mode), %l4
+ sub %l0, %l4, %l4
+ stw %l1, [%l4]
+ mov (1b - prom_boot_mapping_phys_high), %l4
+ sub %l0, %l4, %l4
+ ldx [%sp + 2047 + 128 + 0x48], %l2 ! physaddr high
+ stx %l2, [%l4 + 0x0]
+ ldx [%sp + 2047 + 128 + 0x50], %l3 ! physaddr low
+ stx %l3, [%l4 + 0x8]
+
+ /* Leave service as-is, "call-method" */
+ mov 7, %l3
+ stx %l3, [%sp + 2047 + 128 + 0x08] ! num_args, 7
+ mov 1, %l3
+ stx %l3, [%sp + 2047 + 128 + 0x10] ! num_rets, 7
+ mov (1b - prom_map_name), %l3
+ sub %l0, %l3, %l3
+ stx %l3, [%sp + 2047 + 128 + 0x18] ! arg1: "map"
+ /* Leave arg2 as-is, prom_mmu_ihandle_cache */
+ mov -1, %l3
+ stx %l3, [%sp + 2047 + 128 + 0x28] ! arg3: mode (-1 default)
+ sethi %hi(8 * 1024 * 1024), %l3
+ stx %l3, [%sp + 2047 + 128 + 0x30] ! arg4: size (8MB)
+ sethi %hi(KERNBASE), %l3
+ stx %l3, [%sp + 2047 + 128 + 0x38] ! arg5: vaddr (KERNBASE)
+ stx %g0, [%sp + 2047 + 128 + 0x40] ! arg6: empty
+ mov (1b - prom_boot_mapping_phys_low), %l3
+ sub %l0, %l3, %l3
+ ldx [%l3], %l3
+ stx %l3, [%sp + 2047 + 128 + 0x48] ! arg7: phys addr
+ call %l7
+ add %sp, (2047 + 128), %o0 ! argument array
+
+ add %sp, (192 + 128), %sp
+
+sparc64_boot_after_remap:
BRANCH_IF_CHEETAH_BASE(g1,g7,cheetah_boot)
BRANCH_IF_CHEETAH_PLUS_OR_FOLLOWON(g1,g7,cheetah_plus_boot)
ba,pt %xcc, spitfire_boot
@@ -125,185 +275,7 @@ cheetah_generic_boot:
stxa %g0, [%g3] ASI_IMMU
membar #Sync
- wrpr %g0, (PSTATE_PRIV|PSTATE_PEF|PSTATE_IE), %pstate
- wr %g0, 0, %fprs
-
- /* Just like for Spitfire, we probe itlb-2 for a mapping which
- * matches our current %pc. We take the physical address in
- * that mapping and use it to make our own.
- */
-
- /* %g5 holds the tlb data */
- sethi %uhi(_PAGE_VALID | _PAGE_SZ4MB), %g5
- sllx %g5, 32, %g5
- or %g5, (_PAGE_CP | _PAGE_CV | _PAGE_P | _PAGE_L | _PAGE_W | _PAGE_G), %g5
-
- /* Put PADDR tlb data mask into %g3. */
- sethi %uhi(_PAGE_PADDR), %g3
- or %g3, %ulo(_PAGE_PADDR), %g3
- sllx %g3, 32, %g3
- sethi %hi(_PAGE_PADDR), %g7
- or %g7, %lo(_PAGE_PADDR), %g7
- or %g3, %g7, %g3
-
- set 2 << 16, %l0 /* TLB entry walker. */
- set 0x1fff, %l2 /* Page mask. */
- rd %pc, %l3
- andn %l3, %l2, %g2 /* vaddr comparator */
-
-1: ldxa [%l0] ASI_ITLB_TAG_READ, %g1
- membar #Sync
- andn %g1, %l2, %g1
- cmp %g1, %g2
- be,pn %xcc, cheetah_got_tlbentry
- nop
- and %l0, (127 << 3), %g1
- cmp %g1, (127 << 3)
- blu,pt %xcc, 1b
- add %l0, (1 << 3), %l0
-
- /* Search the small TLB. OBP never maps us like that but
- * newer SILO can.
- */
- clr %l0
-
-1: ldxa [%l0] ASI_ITLB_TAG_READ, %g1
- membar #Sync
- andn %g1, %l2, %g1
- cmp %g1, %g2
- be,pn %xcc, cheetah_got_tlbentry
- nop
- cmp %l0, (15 << 3)
- blu,pt %xcc, 1b
- add %l0, (1 << 3), %l0
-
- /* BUG() if we get here... */
- ta 0x5
-
-cheetah_got_tlbentry:
- ldxa [%l0] ASI_ITLB_DATA_ACCESS, %g0
- ldxa [%l0] ASI_ITLB_DATA_ACCESS, %g1
- membar #Sync
- and %g1, %g3, %g1
- set 0x5fff, %l0
- andn %g1, %l0, %g1
- or %g5, %g1, %g5
-
- /* Clear out any KERNBASE area entries. */
- set 2 << 16, %l0
- sethi %hi(KERNBASE), %g3
- sethi %hi(KERNBASE<<1), %g7
- mov TLB_TAG_ACCESS, %l7
-
- /* First, check ITLB */
-1: ldxa [%l0] ASI_ITLB_TAG_READ, %g1
- membar #Sync
- andn %g1, %l2, %g1
- cmp %g1, %g3
- blu,pn %xcc, 2f
- cmp %g1, %g7
- bgeu,pn %xcc, 2f
- nop
- stxa %g0, [%l7] ASI_IMMU
- membar #Sync
- stxa %g0, [%l0] ASI_ITLB_DATA_ACCESS
- membar #Sync
-
-2: and %l0, (127 << 3), %g1
- cmp %g1, (127 << 3)
- blu,pt %xcc, 1b
- add %l0, (1 << 3), %l0
-
- /* Next, check DTLB */
- set 2 << 16, %l0
-1: ldxa [%l0] ASI_DTLB_TAG_READ, %g1
- membar #Sync
- andn %g1, %l2, %g1
- cmp %g1, %g3
- blu,pn %xcc, 2f
- cmp %g1, %g7
- bgeu,pn %xcc, 2f
- nop
- stxa %g0, [%l7] ASI_DMMU
- membar #Sync
- stxa %g0, [%l0] ASI_DTLB_DATA_ACCESS
- membar #Sync
-
-2: and %l0, (511 << 3), %g1
- cmp %g1, (511 << 3)
- blu,pt %xcc, 1b
- add %l0, (1 << 3), %l0
-
- /* On Cheetah+, have to check second DTLB. */
- BRANCH_IF_CHEETAH_PLUS_OR_FOLLOWON(g1,l0,2f)
- ba,pt %xcc, 9f
- nop
-
-2: set 3 << 16, %l0
-1: ldxa [%l0] ASI_DTLB_TAG_READ, %g1
- membar #Sync
- andn %g1, %l2, %g1
- cmp %g1, %g3
- blu,pn %xcc, 2f
- cmp %g1, %g7
- bgeu,pn %xcc, 2f
- nop
- stxa %g0, [%l7] ASI_DMMU
- membar #Sync
- stxa %g0, [%l0] ASI_DTLB_DATA_ACCESS
- membar #Sync
-
-2: and %l0, (511 << 3), %g1
- cmp %g1, (511 << 3)
- blu,pt %xcc, 1b
- add %l0, (1 << 3), %l0
-
-9:
-
- /* Now lock the TTE we created into ITLB-0 and DTLB-0,
- * entry 15 (and maybe 14 too).
- */
- sethi %hi(KERNBASE), %g3
- set (0 << 16) | (15 << 3), %g7
- stxa %g3, [%l7] ASI_DMMU
- membar #Sync
- stxa %g5, [%g7] ASI_DTLB_DATA_ACCESS
- membar #Sync
- stxa %g3, [%l7] ASI_IMMU
- membar #Sync
- stxa %g5, [%g7] ASI_ITLB_DATA_ACCESS
- membar #Sync
- flush %g3
- membar #Sync
- sethi %hi(_end), %g3 /* Check for bigkernel case */
- or %g3, %lo(_end), %g3
- srl %g3, 23, %g3 /* Check if _end > 8M */
- brz,pt %g3, 1f
- sethi %hi(KERNBASE), %g3 /* Restore for fixup code below */
- sethi %hi(0x400000), %g3
- or %g3, %lo(0x400000), %g3
- add %g5, %g3, %g5 /* New tte data */
- andn %g5, (_PAGE_G), %g5
- sethi %hi(KERNBASE+0x400000), %g3
- or %g3, %lo(KERNBASE+0x400000), %g3
- set (0 << 16) | (14 << 3), %g7
- stxa %g3, [%l7] ASI_DMMU
- membar #Sync
- stxa %g5, [%g7] ASI_DTLB_DATA_ACCESS
- membar #Sync
- stxa %g3, [%l7] ASI_IMMU
- membar #Sync
- stxa %g5, [%g7] ASI_ITLB_DATA_ACCESS
- membar #Sync
- flush %g3
- membar #Sync
- sethi %hi(KERNBASE), %g3 /* Restore for fixup code below */
- ba,pt %xcc, 1f
- nop
-
-1: set sun4u_init, %g2
- jmpl %g2 + %g0, %g0
- nop
+ ba,a,pt %xcc, jump_to_sun4u_init
spitfire_boot:
/* Typically PROM has already enabled both MMU's and both on-chip
@@ -313,6 +285,7 @@ spitfire_boot:
stxa %g1, [%g0] ASI_LSU_CONTROL
membar #Sync
+jump_to_sun4u_init:
/*
* Make sure we are in privileged mode, have address masking,
* using the ordinary globals and have enabled floating
@@ -324,151 +297,6 @@ spitfire_boot:
wrpr %g0, (PSTATE_PRIV|PSTATE_PEF|PSTATE_IE), %pstate
wr %g0, 0, %fprs
-spitfire_create_mappings:
- /* %g5 holds the tlb data */
- sethi %uhi(_PAGE_VALID | _PAGE_SZ4MB), %g5
- sllx %g5, 32, %g5
- or %g5, (_PAGE_CP | _PAGE_CV | _PAGE_P | _PAGE_L | _PAGE_W | _PAGE_G), %g5
-
- /* Base of physical memory cannot reliably be assumed to be
- * at 0x0! Figure out where it happens to be. -DaveM
- */
-
- /* Put PADDR tlb data mask into %g3. */
- sethi %uhi(_PAGE_PADDR_SF), %g3
- or %g3, %ulo(_PAGE_PADDR_SF), %g3
- sllx %g3, 32, %g3
- sethi %hi(_PAGE_PADDR_SF), %g7
- or %g7, %lo(_PAGE_PADDR_SF), %g7
- or %g3, %g7, %g3
-
- /* Walk through entire ITLB, looking for entry which maps
- * our %pc currently, stick PADDR from there into %g5 tlb data.
- */
- clr %l0 /* TLB entry walker. */
- set 0x1fff, %l2 /* Page mask. */
- rd %pc, %l3
- andn %l3, %l2, %g2 /* vaddr comparator */
-1:
- /* Yes, the nops seem to be necessary for now, don't ask me why. -DaveM */
- ldxa [%l0] ASI_ITLB_TAG_READ, %g1
- nop
- nop
- nop
- andn %g1, %l2, %g1 /* Get vaddr */
- cmp %g1, %g2
- be,a,pn %xcc, spitfire_got_tlbentry
- ldxa [%l0] ASI_ITLB_DATA_ACCESS, %g1
- cmp %l0, (63 << 3)
- blu,pt %xcc, 1b
- add %l0, (1 << 3), %l0
-
- /* BUG() if we get here... */
- ta 0x5
-
-spitfire_got_tlbentry:
- /* Nops here again, perhaps Cheetah/Blackbird are better behaved... */
- nop
- nop
- nop
- and %g1, %g3, %g1 /* Mask to just get paddr bits. */
- set 0x5fff, %l3 /* Mask offset to get phys base. */
- andn %g1, %l3, %g1
-
- /* NOTE: We hold on to %g1 paddr base as we need it below to lock
- * NOTE: the PROM cif code into the TLB.
- */
-
- or %g5, %g1, %g5 /* Or it into TAG being built. */
-
- clr %l0 /* TLB entry walker. */
- sethi %hi(KERNBASE), %g3 /* 4M lower limit */
- sethi %hi(KERNBASE<<1), %g7 /* 8M upper limit */
- mov TLB_TAG_ACCESS, %l7
-1:
- /* Yes, the nops seem to be necessary for now, don't ask me why. -DaveM */
- ldxa [%l0] ASI_ITLB_TAG_READ, %g1
- nop
- nop
- nop
- andn %g1, %l2, %g1 /* Get vaddr */
- cmp %g1, %g3
- blu,pn %xcc, 2f
- cmp %g1, %g7
- bgeu,pn %xcc, 2f
- nop
- stxa %g0, [%l7] ASI_IMMU
- stxa %g0, [%l0] ASI_ITLB_DATA_ACCESS
- membar #Sync
-2:
- cmp %l0, (63 << 3)
- blu,pt %xcc, 1b
- add %l0, (1 << 3), %l0
-
- nop; nop; nop
-
- clr %l0 /* TLB entry walker. */
-1:
- /* Yes, the nops seem to be necessary for now, don't ask me why. -DaveM */
- ldxa [%l0] ASI_DTLB_TAG_READ, %g1
- nop
- nop
- nop
- andn %g1, %l2, %g1 /* Get vaddr */
- cmp %g1, %g3
- blu,pn %xcc, 2f
- cmp %g1, %g7
- bgeu,pn %xcc, 2f
- nop
- stxa %g0, [%l7] ASI_DMMU
- stxa %g0, [%l0] ASI_DTLB_DATA_ACCESS
- membar #Sync
-2:
- cmp %l0, (63 << 3)
- blu,pt %xcc, 1b
- add %l0, (1 << 3), %l0
-
- nop; nop; nop
-
-
- /* PROM never puts any TLB entries into the MMU with the lock bit
- * set. So we gladly use tlb entry 63 for KERNBASE. And maybe 62 too.
- */
-
- sethi %hi(KERNBASE), %g3
- mov (63 << 3), %g7
- stxa %g3, [%l7] ASI_DMMU /* KERNBASE into TLB TAG */
- stxa %g5, [%g7] ASI_DTLB_DATA_ACCESS /* TTE into TLB DATA */
- membar #Sync
- stxa %g3, [%l7] ASI_IMMU /* KERNBASE into TLB TAG */
- stxa %g5, [%g7] ASI_ITLB_DATA_ACCESS /* TTE into TLB DATA */
- membar #Sync
- flush %g3
- membar #Sync
- sethi %hi(_end), %g3 /* Check for bigkernel case */
- or %g3, %lo(_end), %g3
- srl %g3, 23, %g3 /* Check if _end > 8M */
- brz,pt %g3, 2f
- sethi %hi(KERNBASE), %g3 /* Restore for fixup code below */
- sethi %hi(0x400000), %g3
- or %g3, %lo(0x400000), %g3
- add %g5, %g3, %g5 /* New tte data */
- andn %g5, (_PAGE_G), %g5
- sethi %hi(KERNBASE+0x400000), %g3
- or %g3, %lo(KERNBASE+0x400000), %g3
- mov (62 << 3), %g7
- stxa %g3, [%l7] ASI_DMMU
- stxa %g5, [%g7] ASI_DTLB_DATA_ACCESS
- membar #Sync
- stxa %g3, [%l7] ASI_IMMU
- stxa %g5, [%g7] ASI_ITLB_DATA_ACCESS
- membar #Sync
- flush %g3
- membar #Sync
- sethi %hi(KERNBASE), %g3 /* Restore for fixup code below */
-2: ba,pt %xcc, 1f
- nop
-1:
set sun4u_init, %g2
jmpl %g2 + %g0, %g0
nop
@@ -483,38 +311,12 @@ sun4u_init:
stxa %g0, [%g7] ASI_DMMU
membar #Sync
- /* We are now safely (we hope) in Nucleus context (0), rewrite
- * the KERNBASE TTE's so they no longer have the global bit set.
- * Don't forget to setup TAG_ACCESS first 8-)
- */
- mov TLB_TAG_ACCESS, %g2
- stxa %g3, [%g2] ASI_IMMU
- stxa %g3, [%g2] ASI_DMMU
- membar #Sync
-
BRANCH_IF_ANY_CHEETAH(g1,g7,cheetah_tlb_fixup)
ba,pt %xcc, spitfire_tlb_fixup
nop
cheetah_tlb_fixup:
- set (0 << 16) | (15 << 3), %g7
- ldxa [%g7] ASI_ITLB_DATA_ACCESS, %g0
- ldxa [%g7] ASI_ITLB_DATA_ACCESS, %g1
- andn %g1, (_PAGE_G), %g1
- stxa %g1, [%g7] ASI_ITLB_DATA_ACCESS
- membar #Sync
-
- ldxa [%g7] ASI_DTLB_DATA_ACCESS, %g0
- ldxa [%g7] ASI_DTLB_DATA_ACCESS, %g1
- andn %g1, (_PAGE_G), %g1
- stxa %g1, [%g7] ASI_DTLB_DATA_ACCESS
- membar #Sync
-
- /* Kill instruction prefetch queues. */
- flush %g3
- membar #Sync
-
mov 2, %g2 /* Set TLB type to cheetah+. */
BRANCH_IF_CHEETAH_PLUS_OR_FOLLOWON(g1,g7,1f)
@@ -551,21 +353,6 @@ cheetah_tlb_fixup:
nop
spitfire_tlb_fixup:
- mov (63 << 3), %g7
- ldxa [%g7] ASI_ITLB_DATA_ACCESS, %g1
- andn %g1, (_PAGE_G), %g1
- stxa %g1, [%g7] ASI_ITLB_DATA_ACCESS
- membar #Sync
-
- ldxa [%g7] ASI_DTLB_DATA_ACCESS, %g1
- andn %g1, (_PAGE_G), %g1
- stxa %g1, [%g7] ASI_DTLB_DATA_ACCESS
- membar #Sync
-
- /* Kill instruction prefetch queues. */
- flush %g3
- membar #Sync
-
/* Set TLB type to spitfire. */
mov 0, %g2
sethi %hi(tlb_type), %g1
@@ -578,24 +365,6 @@ tlb_fixup_done:
mov %sp, %l6
mov %o4, %l7
-#if 0 /* We don't do it like this anymore, but for historical hack value
- * I leave this snippet here to show how crazy we can be sometimes. 8-)
- */
-
- /* Setup "Linux Current Register", thanks Sun 8-) */
- wr %g0, 0x1, %pcr
-
- /* Blackbird errata workaround. See commentary in
- * smp.c:smp_percpu_timer_interrupt() for more
- * information.
- */
- ba,pt %xcc, 99f
- nop
- .align 64
-99: wr %g6, %g0, %pic
- rd %pic, %g0
-#endif
-
wr %g0, ASI_P, %asi
mov 1, %g1
sllx %g1, THREAD_SHIFT, %g1
diff --git a/arch/sparc64/kernel/setup.c b/arch/sparc64/kernel/setup.c
index ddbed3341a2..0296cb00fc9 100644
--- a/arch/sparc64/kernel/setup.c
+++ b/arch/sparc64/kernel/setup.c
@@ -536,20 +536,7 @@ void __init setup_arch(char **cmdline_p)
}
pfn_base = phys_base >> PAGE_SHIFT;
- switch (tlb_type) {
- default:
- case spitfire:
- kern_base = spitfire_get_itlb_data(sparc64_highest_locked_tlbent());
- kern_base &= _PAGE_PADDR_SF;
- break;
-
- case cheetah:
- case cheetah_plus:
- kern_base = cheetah_get_litlb_data(sparc64_highest_locked_tlbent());
- kern_base &= _PAGE_PADDR;
- break;
- };
-
+ kern_base = (prom_boot_mapping_phys_low >> 22UL) << 22UL;
kern_size = (unsigned long)&_end - (unsigned long)KERNBASE;
if (!root_flags)
diff --git a/arch/sparc64/kernel/trampoline.S b/arch/sparc64/kernel/trampoline.S
index 3a145fc39cf..89f2fcfcd66 100644
--- a/arch/sparc64/kernel/trampoline.S
+++ b/arch/sparc64/kernel/trampoline.S
@@ -119,8 +119,8 @@ startup_continue:
sethi %hi(itlb_load), %g2
or %g2, %lo(itlb_load), %g2
stx %g2, [%sp + 2047 + 128 + 0x18]
- sethi %hi(mmu_ihandle_cache), %g2
- lduw [%g2 + %lo(mmu_ihandle_cache)], %g2
+ sethi %hi(prom_mmu_ihandle_cache), %g2
+ lduw [%g2 + %lo(prom_mmu_ihandle_cache)], %g2
stx %g2, [%sp + 2047 + 128 + 0x20]
sethi %hi(KERNBASE), %g2
stx %g2, [%sp + 2047 + 128 + 0x28]
@@ -156,8 +156,8 @@ startup_continue:
sethi %hi(itlb_load), %g2
or %g2, %lo(itlb_load), %g2
stx %g2, [%sp + 2047 + 128 + 0x18]
- sethi %hi(mmu_ihandle_cache), %g2
- lduw [%g2 + %lo(mmu_ihandle_cache)], %g2
+ sethi %hi(prom_mmu_ihandle_cache), %g2
+ lduw [%g2 + %lo(prom_mmu_ihandle_cache)], %g2
stx %g2, [%sp + 2047 + 128 + 0x20]
sethi %hi(KERNBASE + 0x400000), %g2
stx %g2, [%sp + 2047 + 128 + 0x28]
@@ -190,8 +190,8 @@ do_dtlb:
sethi %hi(dtlb_load), %g2
or %g2, %lo(dtlb_load), %g2
stx %g2, [%sp + 2047 + 128 + 0x18]
- sethi %hi(mmu_ihandle_cache), %g2
- lduw [%g2 + %lo(mmu_ihandle_cache)], %g2
+ sethi %hi(prom_mmu_ihandle_cache), %g2
+ lduw [%g2 + %lo(prom_mmu_ihandle_cache)], %g2
stx %g2, [%sp + 2047 + 128 + 0x20]
sethi %hi(KERNBASE), %g2
stx %g2, [%sp + 2047 + 128 + 0x28]
@@ -228,8 +228,8 @@ do_dtlb:
sethi %hi(dtlb_load), %g2
or %g2, %lo(dtlb_load), %g2
stx %g2, [%sp + 2047 + 128 + 0x18]
- sethi %hi(mmu_ihandle_cache), %g2
- lduw [%g2 + %lo(mmu_ihandle_cache)], %g2
+ sethi %hi(prom_mmu_ihandle_cache), %g2
+ lduw [%g2 + %lo(prom_mmu_ihandle_cache)], %g2
stx %g2, [%sp + 2047 + 128 + 0x20]
sethi %hi(KERNBASE + 0x400000), %g2
stx %g2, [%sp + 2047 + 128 + 0x28]
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-01 10:27:30 +0000