diff options
Diffstat (limited to 'arch')
| -rw-r--r-- | arch/Kconfig | 14 | ||||
| -rw-r--r-- | arch/x86/kernel/apic_32.c | 4 | ||||
| -rw-r--r-- | arch/x86/kernel/apic_64.c | 4 | ||||
| -rw-r--r-- | arch/x86/kernel/hpet.c | 6 | ||||
| -rw-r--r-- | arch/x86/kernel/quirks.c | 41 | ||||
| -rw-r--r-- | arch/x86/oprofile/Makefile | 2 | ||||
| -rw-r--r-- | arch/x86/oprofile/nmi_int.c | 27 | ||||
| -rw-r--r-- | arch/x86/oprofile/op_model_amd.c | 543 | ||||
| -rw-r--r-- | arch/x86/oprofile/op_model_athlon.c | 190 | ||||
| -rw-r--r-- | arch/x86/oprofile/op_x86_model.h | 4 | ||||
| -rw-r--r-- | arch/x86/pci/fixup.c | 28 |
11 files changed, 662 insertions, 201 deletions
diff --git a/arch/Kconfig b/arch/Kconfig index 364c6dadde0..0267babe5eb 100644 --- a/arch/Kconfig +++ b/arch/Kconfig @@ -13,6 +13,20 @@ config OPROFILE If unsure, say N. +config OPROFILE_IBS + bool "OProfile AMD IBS support (EXPERIMENTAL)" + default n + depends on OPROFILE && SMP && X86 + help + Instruction-Based Sampling (IBS) is a new profiling + technique that provides rich, precise program performance + information. IBS is introduced by AMD Family10h processors + (AMD Opteron Quad-Core processor “Barcelona”) to overcome + the limitations of conventional performance counter + sampling. + + If unsure, say N. + config HAVE_OPROFILE def_bool n diff --git a/arch/x86/kernel/apic_32.c b/arch/x86/kernel/apic_32.c index a91c57cb666..21c831d96af 100644 --- a/arch/x86/kernel/apic_32.c +++ b/arch/x86/kernel/apic_32.c @@ -295,6 +295,9 @@ static void __setup_APIC_LVTT(unsigned int clocks, int oneshot, int irqen) * * Vector mappings are hard coded. On K8 only offset 0 (APIC500) and * MCE interrupts are supported. Thus MCE offset must be set to 0. + * + * If mask=1, the LVT entry does not generate interrupts while mask=0 + * enables the vector. See also the BKDGs. */ #define APIC_EILVT_LVTOFF_MCE 0 @@ -319,6 +322,7 @@ u8 setup_APIC_eilvt_ibs(u8 vector, u8 msg_type, u8 mask) setup_APIC_eilvt(APIC_EILVT_LVTOFF_IBS, vector, msg_type, mask); return APIC_EILVT_LVTOFF_IBS; } +EXPORT_SYMBOL_GPL(setup_APIC_eilvt_ibs); /* * Program the next event, relative to now diff --git a/arch/x86/kernel/apic_64.c b/arch/x86/kernel/apic_64.c index 53898b65a6a..94ddb69ae15 100644 --- a/arch/x86/kernel/apic_64.c +++ b/arch/x86/kernel/apic_64.c @@ -307,6 +307,9 @@ static void __setup_APIC_LVTT(unsigned int clocks, int oneshot, int irqen) * * Vector mappings are hard coded. On K8 only offset 0 (APIC500) and * MCE interrupts are supported. Thus MCE offset must be set to 0. + * + * If mask=1, the LVT entry does not generate interrupts while mask=0 + * enables the vector. See also the BKDGs. */ #define APIC_EILVT_LVTOFF_MCE 0 @@ -331,6 +334,7 @@ u8 setup_APIC_eilvt_ibs(u8 vector, u8 msg_type, u8 mask) setup_APIC_eilvt(APIC_EILVT_LVTOFF_IBS, vector, msg_type, mask); return APIC_EILVT_LVTOFF_IBS; } +EXPORT_SYMBOL_GPL(setup_APIC_eilvt_ibs); /* * Program the next event, relative to now diff --git a/arch/x86/kernel/hpet.c b/arch/x86/kernel/hpet.c index 73deaffadd0..acf62fc233d 100644 --- a/arch/x86/kernel/hpet.c +++ b/arch/x86/kernel/hpet.c @@ -115,13 +115,17 @@ static void hpet_reserve_platform_timers(unsigned long id) hd.hd_phys_address = hpet_address; hd.hd_address = hpet; hd.hd_nirqs = nrtimers; - hd.hd_flags = HPET_DATA_PLATFORM; hpet_reserve_timer(&hd, 0); #ifdef CONFIG_HPET_EMULATE_RTC hpet_reserve_timer(&hd, 1); #endif + /* + * NOTE that hd_irq[] reflects IOAPIC input pins (LEGACY_8254 + * is wrong for i8259!) not the output IRQ. Many BIOS writers + * don't bother configuring *any* comparator interrupts. + */ hd.hd_irq[0] = HPET_LEGACY_8254; hd.hd_irq[1] = HPET_LEGACY_RTC; diff --git a/arch/x86/kernel/quirks.c b/arch/x86/kernel/quirks.c index d1385881810..f6a11b9b1f9 100644 --- a/arch/x86/kernel/quirks.c +++ b/arch/x86/kernel/quirks.c @@ -354,9 +354,27 @@ static void ati_force_hpet_resume(void) printk(KERN_DEBUG "Force enabled HPET at resume\n"); } +static u32 ati_ixp4x0_rev(struct pci_dev *dev) +{ + u32 d; + u8 b; + + pci_read_config_byte(dev, 0xac, &b); + b &= ~(1<<5); + pci_write_config_byte(dev, 0xac, b); + pci_read_config_dword(dev, 0x70, &d); + d |= 1<<8; + pci_write_config_dword(dev, 0x70, d); + pci_read_config_dword(dev, 0x8, &d); + d &= 0xff; + dev_printk(KERN_DEBUG, &dev->dev, "SB4X0 revision 0x%x\n", d); + return d; +} + static void ati_force_enable_hpet(struct pci_dev *dev) { - u32 uninitialized_var(val); + u32 d, val; + u8 b; if (hpet_address || force_hpet_address) return; @@ -366,14 +384,33 @@ static void ati_force_enable_hpet(struct pci_dev *dev) return; } + d = ati_ixp4x0_rev(dev); + if (d < 0x82) + return; + + /* base address */ pci_write_config_dword(dev, 0x14, 0xfed00000); pci_read_config_dword(dev, 0x14, &val); + + /* enable interrupt */ + outb(0x72, 0xcd6); b = inb(0xcd7); + b |= 0x1; + outb(0x72, 0xcd6); outb(b, 0xcd7); + outb(0x72, 0xcd6); b = inb(0xcd7); + if (!(b & 0x1)) + return; + pci_read_config_dword(dev, 0x64, &d); + d |= (1<<10); + pci_write_config_dword(dev, 0x64, d); + pci_read_config_dword(dev, 0x64, &d); + if (!(d & (1<<10))) + return; + force_hpet_address = val; force_hpet_resume_type = ATI_FORCE_HPET_RESUME; dev_printk(KERN_DEBUG, &dev->dev, "Force enabled HPET at 0x%lx\n", force_hpet_address); cached_dev = dev; - return; } DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP400_SMBUS, ati_force_enable_hpet); diff --git a/arch/x86/oprofile/Makefile b/arch/x86/oprofile/Makefile index 30f3eb36666..446902b2a6b 100644 --- a/arch/x86/oprofile/Makefile +++ b/arch/x86/oprofile/Makefile @@ -7,6 +7,6 @@ DRIVER_OBJS = $(addprefix ../../../drivers/oprofile/, \ timer_int.o ) oprofile-y := $(DRIVER_OBJS) init.o backtrace.o -oprofile-$(CONFIG_X86_LOCAL_APIC) += nmi_int.o op_model_athlon.o \ +oprofile-$(CONFIG_X86_LOCAL_APIC) += nmi_int.o op_model_amd.o \ op_model_ppro.o op_model_p4.o oprofile-$(CONFIG_X86_IO_APIC) += nmi_timer_int.o diff --git a/arch/x86/oprofile/nmi_int.c b/arch/x86/oprofile/nmi_int.c index 8a5f1614a3d..57f6c908808 100644 --- a/arch/x86/oprofile/nmi_int.c +++ b/arch/x86/oprofile/nmi_int.c @@ -1,10 +1,11 @@ /** * @file nmi_int.c * - * @remark Copyright 2002 OProfile authors + * @remark Copyright 2002-2008 OProfile authors * @remark Read the file COPYING * * @author John Levon <levon@movementarian.org> + * @author Robert Richter <robert.richter@amd.com> */ #include <linux/init.h> @@ -439,6 +440,7 @@ int __init op_nmi_init(struct oprofile_operations *ops) __u8 vendor = boot_cpu_data.x86_vendor; __u8 family = boot_cpu_data.x86; char *cpu_type; + int ret = 0; if (!cpu_has_apic) return -ENODEV; @@ -451,19 +453,23 @@ int __init op_nmi_init(struct oprofile_operations *ops) default: return -ENODEV; case 6: - model = &op_athlon_spec; + model = &op_amd_spec; cpu_type = "i386/athlon"; break; case 0xf: - model = &op_athlon_spec; + model = &op_amd_spec; /* Actually it could be i386/hammer too, but give user space an consistent name. */ cpu_type = "x86-64/hammer"; break; case 0x10: - model = &op_athlon_spec; + model = &op_amd_spec; cpu_type = "x86-64/family10"; break; + case 0x11: + model = &op_amd_spec; + cpu_type = "x86-64/family11h"; + break; } break; @@ -490,17 +496,24 @@ int __init op_nmi_init(struct oprofile_operations *ops) return -ENODEV; } - init_sysfs(); #ifdef CONFIG_SMP register_cpu_notifier(&oprofile_cpu_nb); #endif - using_nmi = 1; + /* default values, can be overwritten by model */ ops->create_files = nmi_create_files; ops->setup = nmi_setup; ops->shutdown = nmi_shutdown; ops->start = nmi_start; ops->stop = nmi_stop; ops->cpu_type = cpu_type; + + if (model->init) + ret = model->init(ops); + if (ret) + return ret; + + init_sysfs(); + using_nmi = 1; printk(KERN_INFO "oprofile: using NMI interrupt.\n"); return 0; } @@ -513,4 +526,6 @@ void op_nmi_exit(void) unregister_cpu_notifier(&oprofile_cpu_nb); #endif } + if (model->exit) + model->exit(); } diff --git a/arch/x86/oprofile/op_model_amd.c b/arch/x86/oprofile/op_model_amd.c new file mode 100644 index 00000000000..d9faf607b3a --- /dev/null +++ b/arch/x86/oprofile/op_model_amd.c @@ -0,0 +1,543 @@ +/* + * @file op_model_amd.c + * athlon / K7 / K8 / Family 10h model-specific MSR operations + * + * @remark Copyright 2002-2008 OProfile authors + * @remark Read the file COPYING + * + * @author John Levon + * @author Philippe Elie + * @author Graydon Hoare + * @author Robert Richter <robert.richter@amd.com> + * @author Barry Kasindorf +*/ + +#include <linux/oprofile.h> +#include <linux/device.h> +#include <linux/pci.h> + +#include <asm/ptrace.h> +#include <asm/msr.h> +#include <asm/nmi.h> + +#include "op_x86_model.h" +#include "op_counter.h" + +#define NUM_COUNTERS 4 +#define NUM_CONTROLS 4 + +#define CTR_IS_RESERVED(msrs, c) (msrs->counters[(c)].addr ? 1 : 0) +#define CTR_READ(l, h, msrs, c) do {rdmsr(msrs->counters[(c)].addr, (l), (h)); } while (0) +#define CTR_WRITE(l, msrs, c) do {wrmsr(msrs->counters[(c)].addr, -(unsigned int)(l), -1); } while (0) +#define CTR_OVERFLOWED(n) (!((n) & (1U<<31))) + +#define CTRL_IS_RESERVED(msrs, c) (msrs->controls[(c)].addr ? 1 : 0) +#define CTRL_READ(l, h, msrs, c) do {rdmsr(msrs->controls[(c)].addr, (l), (h)); } while (0) +#define CTRL_WRITE(l, h, msrs, c) do {wrmsr(msrs->controls[(c)].addr, (l), (h)); } while (0) +#define CTRL_SET_ACTIVE(n) (n |= (1<<22)) +#define CTRL_SET_INACTIVE(n) (n &= ~(1<<22)) +#define CTRL_CLEAR_LO(x) (x &= (1<<21)) +#define CTRL_CLEAR_HI(x) (x &= 0xfffffcf0) +#define CTRL_SET_ENABLE(val) (val |= 1<<20) +#define CTRL_SET_USR(val, u) (val |= ((u & 1) << 16)) +#define CTRL_SET_KERN(val, k) (val |= ((k & 1) << 17)) +#define CTRL_SET_UM(val, m) (val |= (m << 8)) +#define CTRL_SET_EVENT_LOW(val, e) (val |= (e & 0xff)) +#define CTRL_SET_EVENT_HIGH(val, e) (val |= ((e >> 8) & 0xf)) +#define CTRL_SET_HOST_ONLY(val, h) (val |= ((h & 1) << 9)) +#define CTRL_SET_GUEST_ONLY(val, h) (val |= ((h & 1) << 8)) + +static unsigned long reset_value[NUM_COUNTERS]; + +#ifdef CONFIG_OPROFILE_IBS + +/* IbsFetchCtl bits/masks */ +#define IBS_FETCH_HIGH_VALID_BIT (1UL << 17) /* bit 49 */ +#define IBS_FETCH_HIGH_ENABLE (1UL << 16) /* bit 48 */ +#define IBS_FETCH_LOW_MAX_CNT_MASK 0x0000FFFFUL /* MaxCnt mask */ + +/*IbsOpCtl bits */ +#define IBS_OP_LOW_VALID_BIT (1ULL<<18) /* bit 18 */ +#define IBS_OP_LOW_ENABLE (1ULL<<17) /* bit 17 */ + +/* Codes used in cpu_buffer.c */ +/* This produces duplicate code, need to be fixed */ +#define IBS_FETCH_BEGIN 3 +#define IBS_OP_BEGIN 4 + +/* The function interface needs to be fixed, something like add + data. Should then be added to linux/oprofile.h. */ +extern void oprofile_add_ibs_sample(struct pt_regs *const regs, + unsigned int * const ibs_sample, u8 code); + +struct ibs_fetch_sample { + /* MSRC001_1031 IBS Fetch Linear Address Register */ + unsigned int ibs_fetch_lin_addr_low; + unsigned int ibs_fetch_lin_addr_high; + /* MSRC001_1030 IBS Fetch Control Register */ + unsigned int ibs_fetch_ctl_low; + unsigned int ibs_fetch_ctl_high; + /* MSRC001_1032 IBS Fetch Physical Address Register */ + unsigned int ibs_fetch_phys_addr_low; + unsigned int ibs_fetch_phys_addr_high; +}; + +struct ibs_op_sample { + /* MSRC001_1034 IBS Op Logical Address Register (IbsRIP) */ + unsigned int ibs_op_rip_low; + unsigned int ibs_op_rip_high; + /* MSRC001_1035 IBS Op Data Register */ + unsigned int ibs_op_data1_low; + unsigned int ibs_op_data1_high; + /* MSRC001_1036 IBS Op Data 2 Register */ + unsigned int ibs_op_data2_low; + unsigned int ibs_op_data2_high; + /* MSRC001_1037 IBS Op Data 3 Register */ + unsigned int ibs_op_data3_low; + unsigned int ibs_op_data3_high; + /* MSRC001_1038 IBS DC Linear Address Register (IbsDcLinAd) */ + unsigned int ibs_dc_linear_low; + unsigned int ibs_dc_linear_high; + /* MSRC001_1039 IBS DC Physical Address Register (IbsDcPhysAd) */ + unsigned int ibs_dc_phys_low; + unsigned int ibs_dc_phys_high; +}; + +/* + * unitialize the APIC for the IBS interrupts if needed on AMD Family10h+ +*/ +static void clear_ibs_nmi(void); + +static int ibs_allowed; /* AMD Family10h and later */ + +struct op_ibs_config { + unsigned long op_enabled; + unsigned long fetch_enabled; + unsigned long max_cnt_fetch; + unsigned long max_cnt_op; + unsigned long rand_en; + unsigned long dispatched_ops; +}; + +static struct op_ibs_config ibs_config; + +#endif + +/* functions for op_amd_spec */ + +static void op_amd_fill_in_addresses(struct op_msrs * const msrs) +{ + int i; + + for (i = 0; i < NUM_COUNTERS; i++) { + if (reserve_perfctr_nmi(MSR_K7_PERFCTR0 + i)) + msrs->counters[i].addr = MSR_K7_PERFCTR0 + i; + else + msrs->counters[i].addr = 0; + } + + for (i = 0; i < NUM_CONTROLS; i++) { + if (reserve_evntsel_nmi(MSR_K7_EVNTSEL0 + i)) + msrs->controls[i].addr = MSR_K7_EVNTSEL0 + i; + else + msrs->controls[i].addr = 0; + } +} + + +static void op_amd_setup_ctrs(struct op_msrs const * const msrs) +{ + unsigned int low, high; + int i; + + /* clear all counters */ + for (i = 0 ; i < NUM_CONTROLS; ++i) { + if (unlikely(!CTRL_IS_RESERVED(msrs, i))) + continue; + CTRL_READ(low, high, msrs, i); + CTRL_CLEAR_LO(low); + CTRL_CLEAR_HI(high); + CTRL_WRITE(low, high, msrs, i); + } + + /* avoid a false detection of ctr overflows in NMI handler */ + for (i = 0; i < NUM_COUNTERS; ++i) { + if (unlikely(!CTR_IS_RESERVED(msrs, i))) + continue; + CTR_WRITE(1, msrs, i); + } + + /* enable active counters */ + for (i = 0; i < NUM_COUNTERS; ++i) { + if ((counter_config[i].enabled) && (CTR_IS_RESERVED(msrs, i))) { + reset_value[i] = counter_config[i].count; + + CTR_WRITE(counter_config[i].count, msrs, i); + + CTRL_READ(low, high, msrs, i); + CTRL_CLEAR_LO(low); + CTRL_CLEAR_HI(high); + CTRL_SET_ENABLE(low); + CTRL_SET_USR(low, counter_config[i].user); + CTRL_SET_KERN(low, counter_config[i].kernel); + CTRL_SET_UM(low, counter_config[i].unit_mask); + CTRL_SET_EVENT_LOW(low, counter_config[i].event); + CTRL_SET_EVENT_HIGH(high, counter_config[i].event); + CTRL_SET_HOST_ONLY(high, 0); + CTRL_SET_GUEST_ONLY(high, 0); + + CTRL_WRITE(low, high, msrs, i); + } else { + reset_value[i] = 0; + } + } +} + +#ifdef CONFIG_OPROFILE_IBS + +static inline int +op_amd_handle_ibs(struct pt_regs * const regs, + struct op_msrs const * const msrs) +{ + unsigned int low, high; + struct ibs_fetch_sample ibs_fetch; + struct ibs_op_sample ibs_op; + + if (!ibs_allowed) + return 1; + + if (ibs_config.fetch_enabled) { + rdmsr(MSR_AMD64_IBSFETCHCTL, low, high); + if (high & IBS_FETCH_HIGH_VALID_BIT) { + ibs_fetch.ibs_fetch_ctl_high = high; + ibs_fetch.ibs_fetch_ctl_low = low; + rdmsr(MSR_AMD64_IBSFETCHLINAD, low, high); + ibs_fetch.ibs_fetch_lin_addr_high = high; + ibs_fetch.ibs_fetch_lin_addr_low = low; + rdmsr(MSR_AMD64_IBSFETCHPHYSAD, low, high); + ibs_fetch.ibs_fetch_phys_addr_high = high; + ibs_fetch.ibs_fetch_phys_addr_low = low; + + oprofile_add_ibs_sample(regs, + (unsigned int *)&ibs_fetch, + IBS_FETCH_BEGIN); + + /*reenable the IRQ */ + rdmsr(MSR_AMD64_IBSFETCHCTL, low, high); + high &= ~IBS_FETCH_HIGH_VALID_BIT; + high |= IBS_FETCH_HIGH_ENABLE; + low &= IBS_FETCH_LOW_MAX_CNT_MASK; + wrmsr(MSR_AMD64_IBSFETCHCTL, low, high); + } + } + + if (ibs_config.op_enabled) { + rdmsr(MSR_AMD64_IBSOPCTL, low, high); + if (low & IBS_OP_LOW_VALID_BIT) { + rdmsr(MSR_AMD64_IBSOPRIP, low, high); + ibs_op.ibs_op_rip_low = low; + ibs_op.ibs_op_rip_high = high; + rdmsr(MSR_AMD64_IBSOPDATA, low, high); + ibs_op.ibs_op_data1_low = low; + ibs_op.ibs_op_data1_high = high; + rdmsr(MSR_AMD64_IBSOPDATA2, low, high); + ibs_op.ibs_op_data2_low = low; + ibs_op.ibs_op_data2_high = high; + rdmsr(MSR_AMD64_IBSOPDATA3, low, high); + ibs_op.ibs_op_data3_low = low; + ibs_op.ibs_op_data3_high = high; + rdmsr(MSR_AMD64_IBSDCLINAD, low, high); + ibs_op.ibs_dc_linear_low = low; + ibs_op.ibs_dc_linear_high = high; + rdmsr(MSR_AMD64_IBSDCPHYSAD, low, high); + ibs_op.ibs_dc_phys_low = low; + ibs_op.ibs_dc_phys_high = high; + + /* reenable the IRQ */ + oprofile_add_ibs_sample(regs, + (unsigned int *)&ibs_op, + IBS_OP_BEGIN); + rdmsr(MSR_AMD64_IBSOPCTL, low, high); + high = 0; + low &= ~IBS_OP_LOW_VALID_BIT; + low |= IBS_OP_LOW_ENABLE; + wrmsr(MSR_AMD64_IBSOPCTL, low, high); + } + } + + return 1; +} + +#endif + +static int op_amd_check_ctrs(struct pt_regs * const regs, + struct op_msrs const * const msrs) +{ + unsigned int low, high; + int i; + + for (i = 0 ; i < NUM_COUNTERS; ++i) { + if (!reset_value[i]) + continue; + CTR_READ(low, high, msrs, i); + if (CTR_OVERFLOWED(low)) { + oprofile_add_sample(regs, i); + CTR_WRITE(reset_value[i], msrs, i); + } + } + +#ifdef CONFIG_OPROFILE_IBS + op_amd_handle_ibs(regs, msrs); +#endif + + /* See op_model_ppro.c */ + return 1; +} + +static void op_amd_start(struct op_msrs const * const msrs) +{ + unsigned int low, high; + int i; + for (i = 0 ; i < NUM_COUNTERS ; ++i) { + if (reset_value[i]) { + CTRL_READ(low, high, msrs, i); + CTRL_SET_ACTIVE(low); + CTRL_WRITE(low, high, msrs, i); + } + } + +#ifdef CONFIG_OPROFILE_IBS + if (ibs_allowed && ibs_config.fetch_enabled) { + low = (ibs_config.max_cnt_fetch >> 4) & 0xFFFF; + high = IBS_FETCH_HIGH_ENABLE; + wrmsr(MSR_AMD64_IBSFETCHCTL, low, high); + } + + if (ibs_allowed && ibs_config.op_enabled) { + low = ((ibs_config.max_cnt_op >> 4) & 0xFFFF) + IBS_OP_LOW_ENABLE; + high = 0; + wrmsr(MSR_AMD64_IBSOPCTL, low, high); + } +#endif +} + + +static void op_amd_stop(struct op_msrs const * const msrs) +{ + unsigned int low, high; + int i; + + /* Subtle: stop on all counters to avoid race with + * setting our pm callback */ + for (i = 0 ; i < NUM_COUNTERS ; ++i) { + if (!reset_value[i]) + continue; + CTRL_READ(low, high, msrs, i); + CTRL_SET_INACTIVE(low); + CTRL_WRITE(low, high, msrs, i); + } + +#ifdef CONFIG_OPROFILE_IBS + if (ibs_allowed && ibs_config.fetch_enabled) { + low = 0; /* clear max count and enable */ + high = 0; + wrmsr(MSR_AMD64_IBSFETCHCTL, low, high); + } + + if (ibs_allowed && ibs_config.op_enabled) { + low = 0; /* clear max count and enable */ + high = 0; + wrmsr(MSR_AMD64_IBSOPCTL, low, high); + } +#endif +} + +static void op_amd_shutdown(struct op_msrs const * const msrs) +{ + int i; + + for (i = 0 ; i < NUM_COUNTERS ; ++i) { + if (CTR_IS_RESERVED(msrs, i)) + release_perfctr_nmi(MSR_K7_PERFCTR0 + i); + } + for (i = 0 ; i < NUM_CONTROLS ; ++i) { + if (CTRL_IS_RESERVED(msrs, i)) + release_evntsel_nmi(MSR_K7_EVNTSEL0 + i); + } +} + +#ifndef CONFIG_OPROFILE_IBS + +/* no IBS support */ + +static int op_amd_init(struct oprofile_operations *ops) +{ + return 0; +} + +static void op_amd_exit(void) {} + +#else + +static u8 ibs_eilvt_off; + +static inline void apic_init_ibs_nmi_per_cpu(void *arg) +{ + ibs_eilvt_off = setup_APIC_eilvt_ibs(0, APIC_EILVT_MSG_NMI, 0); +} + +static inline void apic_clear_ibs_nmi_per_cpu(void *arg) +{ + setup_APIC_eilvt_ibs(0, APIC_EILVT_MSG_FIX, 1); +} + +static int pfm_amd64_setup_eilvt(void) +{ +#define IBSCTL_LVTOFFSETVAL (1 << 8) +#define IBSCTL 0x1cc + struct pci_dev *cpu_cfg; + int nodes; + u32 value = 0; + + /* per CPU setup */ + on_each_cpu(apic_init_ibs_nmi_per_cpu, NULL, 1); + + nodes = 0; + cpu_cfg = NULL; + do { + cpu_cfg = pci_get_device(PCI_VENDOR_ID_AMD, + PCI_DEVICE_ID_AMD_10H_NB_MISC, + cpu_cfg); + if (!cpu_cfg) + break; + ++nodes; + pci_write_config_dword(cpu_cfg, IBSCTL, ibs_eilvt_off + | IBSCTL_LVTOFFSETVAL); + pci_read_config_dword(cpu_cfg, IBSCTL, &value); + if (value != (ibs_eilvt_off | IBSCTL_LVTOFFSETVAL)) { + printk(KERN_DEBUG "Failed to setup IBS LVT offset, " + "IBSCTL = 0x%08x", value); + return 1; + } + } while (1); + + if (!nodes) { + printk(KERN_DEBUG "No CPU node configured for IBS"); + return 1; + } + +#ifdef CONFIG_NUMA + /* Sanity check */ + /* Works only for 64bit with proper numa implementation. */ + if (nodes != num_possible_nodes()) { + printk(KERN_DEBUG "Failed to setup CPU node(s) for IBS, " + "found: %d, expected %d", + nodes, num_possible_nodes()); + return 1; + } +#endif + return 0; +} + +/* + * initialize the APIC for the IBS interrupts + * if available (AMD Family10h rev B0 and later) + */ +static void setup_ibs(void) +{ + ibs_allowed = boot_cpu_has(X86_FEATURE_IBS); + + if (!ibs_allowed) + return; + + if (pfm_amd64_setup_eilvt()) { + ibs_allowed = 0; + return; + } + + printk(KERN_INFO "oprofile: AMD IBS detected\n"); +} + + +/* + * unitialize the APIC for the IBS interrupts if needed on AMD Family10h + * rev B0 and later */ +static void clear_ibs_nmi(void) +{ + if (ibs_allowed) + on_each_cpu(apic_clear_ibs_nmi_per_cpu, NULL, 1); +} + +static int (*create_arch_files)(struct super_block * sb, struct dentry * root); + +static int setup_ibs_files(struct super_block * sb, struct dentry * root) +{ + char buf[12]; + struct dentry *dir; + int ret = 0; + + /* architecture specific files */ + if (create_arch_files) + ret = create_arch_files(sb, root); + + if (ret) + return ret; + + if (!ibs_allowed) + return ret; + + /* model specific files */ + + /* setup some reasonable defaults */ + ibs_config.max_cnt_fetch = 250000; + ibs_config.fetch_enabled = 0; + ibs_config.max_cnt_op = 250000; + ibs_config.op_enabled = 0; + ibs_config.dispatched_ops = 1; + snprintf(buf, sizeof(buf), "ibs_fetch"); + dir = oprofilefs_mkdir(sb, root, buf); + oprofilefs_create_ulong(sb, dir, "rand_enable", + &ibs_config.rand_en); + oprofilefs_create_ulong(sb, dir, "enable", + &ibs_config.fetch_enabled); + oprofilefs_create_ulong(sb, dir, "max_count", + &ibs_config.max_cnt_fetch); + snprintf(buf, sizeof(buf), "ibs_uops"); + dir = oprofilefs_mkdir(sb, root, buf); + oprofilefs_create_ulong(sb, dir, "enable", + &ibs_config.op_enabled); + oprofilefs_create_ulong(sb, dir, "max_count", + &ibs_config.max_cnt_op); + oprofilefs_create_ulong(sb, dir, "dispatched_ops", + &ibs_config.dispatched_ops); + + return 0; +} + +static int op_amd_init(struct oprofile_operations *ops) +{ + setup_ibs(); + create_arch_files = ops->create_files; + ops->create_files = setup_ibs_files; + return 0; +} + +static void op_amd_exit(void) +{ + clear_ibs_nmi(); +} + +#endif + +struct op_x86_model_spec const op_amd_spec = { + .init = op_amd_init, + .exit = op_amd_exit, + .num_counters = NUM_COUNTERS, + .num_controls = NUM_CONTROLS, + .fill_in_addresses = &op_amd_fill_in_addresses, + .setup_ctrs = &op_amd_setup_ctrs, + .check_ctrs = &op_amd_check_ctrs, + .start = &op_amd_start, + .stop = &op_amd_stop, + .shutdown = &op_amd_shutdown +}; diff --git a/arch/x86/oprofile/op_model_athlon.c b/arch/x86/oprofile/op_model_athlon.c deleted file mode 100644 index 3d534879a9d..00000000000 --- a/arch/x86/oprofile/op_model_athlon.c +++ /dev/null @@ -1,190 +0,0 @@ -/* - * @file op_model_athlon.h - * athlon / K7 / K8 / Family 10h model-specific MSR operations - * - * @remark Copyright 2002 OProfile authors - * @remark Read the file COPYING - * - * @author John Levon - * @author Philippe Elie - * @author Graydon Hoare - */ - -#include <linux/oprofile.h> -#include <asm/ptrace.h> -#include <asm/msr.h> -#include <asm/nmi.h> - -#include "op_x86_model.h" -#include "op_counter.h" - -#define NUM_COUNTERS 4 -#define NUM_CONTROLS 4 - -#define CTR_IS_RESERVED(msrs, c) (msrs->counters[(c)].addr ? 1 : 0) -#define CTR_READ(l, h, msrs, c) do {rdmsr(msrs->counters[(c)].addr, (l), (h)); } while (0) -#define CTR_WRITE(l, msrs, c) do {wrmsr(msrs->counters[(c)].addr, -(unsigned int)(l), -1); } while (0) -#define CTR_OVERFLOWED(n) (!((n) & (1U<<31))) - -#define CTRL_IS_RESERVED(msrs, c) (msrs->controls[(c)].addr ? 1 : 0) -#define CTRL_READ(l, h, msrs, c) do {rdmsr(msrs->controls[(c)].addr, (l), (h)); } while (0) -#define CTRL_WRITE(l, h, msrs, c) do {wrmsr(msrs->controls[(c)].addr, (l), (h)); } while (0) -#define CTRL_SET_ACTIVE(n) (n |= (1<<22)) -#define CTRL_SET_INACTIVE(n) (n &= ~(1<<22)) -#define CTRL_CLEAR_LO(x) (x &= (1<<21)) -#define CTRL_CLEAR_HI(x) (x &= 0xfffffcf0) -#define CTRL_SET_ENABLE(val) (val |= 1<<20) -#define CTRL_SET_USR(val, u) (val |= ((u & 1) << 16)) -#define CTRL_SET_KERN(val, k) (val |= ((k & 1) << 17)) -#define CTRL_SET_UM(val, m) (val |= (m << 8)) -#define CTRL_SET_EVENT_LOW(val, e) (val |= (e & 0xff)) -#define CTRL_SET_EVENT_HIGH(val, e) (val |= ((e >> 8) & 0xf)) -#define CTRL_SET_HOST_ONLY(val, h) (val |= ((h & 1) << 9)) -#define CTRL_SET_GUEST_ONLY(val, h) (val |= ((h & 1) << 8)) - -static unsigned long reset_value[NUM_COUNTERS]; - -static void athlon_fill_in_addresses(struct op_msrs * const msrs) -{ - int i; - - for (i = 0; i < NUM_COUNTERS; i++) { - if (reserve_perfctr_nmi(MSR_K7_PERFCTR0 + i)) - msrs->counters[i].addr = MSR_K7_PERFCTR0 + i; - else - msrs->counters[i].addr = 0; - } - - for (i = 0; i < NUM_CONTROLS; i++) { - if (reserve_evntsel_nmi(MSR_K7_EVNTSEL0 + i)) - msrs->controls[i].addr = MSR_K7_EVNTSEL0 + i; - else - msrs->controls[i].addr = 0; - } -} - - -static void athlon_setup_ctrs(struct op_msrs const * const msrs) -{ - unsigned int low, high; - int i; - - /* clear all counters */ - for (i = 0 ; i < NUM_CONTROLS; ++i) { - if (unlikely(!CTRL_IS_RESERVED(msrs, i))) - continue; - CTRL_READ(low, high, msrs, i); - CTRL_CLEAR_LO(low); - CTRL_CLEAR_HI(high); - CTRL_WRITE(low, high, msrs, i); - } - - /* avoid a false detection of ctr overflows in NMI handler */ - for (i = 0; i < NUM_COUNTERS; ++i) { - if (unlikely(!CTR_IS_RESERVED(msrs, i))) - continue; - CTR_WRITE(1, msrs, i); - } - - /* enable active counters */ - for (i = 0; i < NUM_COUNTERS; ++i) { - if ((counter_config[i].enabled) && (CTR_IS_RESERVED(msrs, i))) { - reset_value[i] = counter_config[i].count; - - CTR_WRITE(counter_config[i].count, msrs, i); - - CTRL_READ(low, high, msrs, i); - CTRL_CLEAR_LO(low); - CTRL_CLEAR_HI(high); - CTRL_SET_ENABLE(low); - CTRL_SET_USR(low, counter_config[i].user); - CTRL_SET_KERN(low, counter_config[i].kernel); - CTRL_SET_UM(low, counter_config[i].unit_mask); - CTRL_SET_EVENT_LOW(low, counter_config[i].event); - CTRL_SET_EVENT_HIGH(high, counter_config[i].event); - CTRL_SET_HOST_ONLY(high, 0); - CTRL_SET_GUEST_ONLY(high, 0); - - CTRL_WRITE(low, high, msrs, i); - } else { - reset_value[i] = 0; - } - } -} - - -static int athlon_check_ctrs(struct pt_regs * const regs, - struct op_msrs const * const msrs) -{ - unsigned int low, high; - int i; - - for (i = 0 ; i < NUM_COUNTERS; ++i) { - if (!reset_value[i]) - continue; - CTR_READ(low, high, msrs, i); - if (CTR_OVERFLOWED(low)) { - oprofile_add_sample(regs, i); - CTR_WRITE(reset_value[i], msrs, i); - } - } - - /* See op_model_ppro.c */ - return 1; -} - - -static void athlon_start(struct op_msrs const * const msrs) -{ - unsigned int low, high; - int i; - for (i = 0 ; i < NUM_COUNTERS ; ++i) { - if (reset_value[i]) { - CTRL_READ(low, high, msrs, i); - CTRL_SET_ACTIVE(low); - CTRL_WRITE(low, high, msrs, i); - } - } -} - - -static void athlon_stop(struct op_msrs const * const msrs) -{ - unsigned int low, high; - int i; - - /* Subtle: stop on all counters to avoid race with - * setting our pm callback */ - for (i = 0 ; i < NUM_COUNTERS ; ++i) { - if (!reset_value[i]) - continue; - CTRL_READ(low, high, msrs, i); - CTRL_SET_INACTIVE(low); - CTRL_WRITE(low, high, msrs, i); - } -} - -static void athlon_shutdown(struct op_msrs const * const msrs) -{ - int i; - - for (i = 0 ; i < NUM_COUNTERS ; ++i) { - if (CTR_IS_RESERVED(msrs, i)) - release_perfctr_nmi(MSR_K7_PERFCTR0 + i); - } - for (i = 0 ; i < NUM_CONTROLS ; ++i) { - if (CTRL_IS_RESERVED(msrs, i)) - release_evntsel_nmi(MSR_K7_EVNTSEL0 + i); - } -} - -struct op_x86_model_spec const op_athlon_spec = { - .num_counters = NUM_COUNTERS, - .num_controls = NUM_CONTROLS, - .fill_in_addresses = &athlon_fill_in_addresses, - .setup_ctrs = &athlon_setup_ctrs, - .check_ctrs = &athlon_check_ctrs, - .start = &athlon_start, - .stop = &athlon_stop, - .shutdown = &athlon_shutdown -}; diff --git a/arch/x86/oprofile/op_x86_model.h b/arch/x86/oprofile/op_x86_model.h index 45b605fa71d..05a0261ba0c 100644 --- a/arch/x86/oprofile/op_x86_model.h +++ b/arch/x86/oprofile/op_x86_model.h @@ -32,6 +32,8 @@ struct pt_regs; * various x86 CPU models' perfctr support. */ struct op_x86_model_spec { + int (*init)(struct oprofile_operations *ops); + void (*exit)(void); unsigned int const num_counters; unsigned int const num_controls; void (*fill_in_addresses)(struct op_msrs * const msrs); @@ -46,6 +48,6 @@ struct op_x86_model_spec { extern struct op_x86_model_spec const op_ppro_spec; extern struct op_x86_model_spec const op_p4_spec; extern struct op_x86_model_spec const op_p4_ht2_spec; -extern struct op_x86_model_spec const op_athlon_spec; +extern struct op_x86_model_spec const op_amd_spec; #endif /* OP_X86_MODEL_H */ diff --git a/arch/x86/pci/fixup.c b/arch/x86/pci/fixup.c index 4bdaa590375..3c27a809393 100644 --- a/arch/x86/pci/fixup.c +++ b/arch/x86/pci/fixup.c @@ -511,3 +511,31 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, 0x1201, fam10h_pci_cfg_space_size); DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, 0x1202, fam10h_pci_cfg_space_size); DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, 0x1203, fam10h_pci_cfg_space_size); DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, 0x1204, fam10h_pci_cfg_space_size); + +/* + * SB600: Disable BAR1 on device 14.0 to avoid HPET resources from + * confusing the PCI engine: + */ +static void sb600_disable_hpet_bar(struct pci_dev *dev) +{ + u8 val; + + /* + * The SB600 and SB700 both share the same device + * ID, but the PM register 0x55 does something different + * for the SB700, so make sure we are dealing with the + * SB600 before touching the bit: + */ + + pci_read_config_byte(dev, 0x08, &val); + + if (val < 0x2F) { + outb(0x55, 0xCD6); + val = inb(0xCD7); + + /* Set bit 7 in PM register 0x55 */ + outb(0x55, 0xCD6); + outb(val | 0x80, 0xCD7); + } +} +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_ATI, 0x4385, sb600_disable_hpet_bar); |