diff options
Diffstat (limited to 'arch')
-rw-r--r-- | arch/microblaze/include/asm/exceptions.h | 96 | ||||
-rw-r--r-- | arch/microblaze/kernel/exceptions.c | 124 | ||||
-rw-r--r-- | arch/microblaze/kernel/hw_exception_handler.S | 458 |
3 files changed, 678 insertions, 0 deletions
diff --git a/arch/microblaze/include/asm/exceptions.h b/arch/microblaze/include/asm/exceptions.h new file mode 100644 index 00000000000..4cdd2159f47 --- /dev/null +++ b/arch/microblaze/include/asm/exceptions.h @@ -0,0 +1,96 @@ +/* + * Preliminary support for HW exception handing for Microblaze + * + * Copyright (C) 2008 Michal Simek + * Copyright (C) 2008 PetaLogix + * Copyright (C) 2005 John Williams <jwilliams@itee.uq.edu.au> + * + * This file is subject to the terms and conditions of the GNU General + * Public License. See the file COPYING in the main directory of this + * archive for more details. + */ + +#ifndef _ASM_MICROBLAZE_EXCEPTIONS_H +#define _ASM_MICROBLAZE_EXCEPTIONS_H + +#ifdef __KERNEL__ +#ifndef __ASSEMBLY__ + +/* Macros to enable and disable HW exceptions in the MSR */ +/* Define MSR enable bit for HW exceptions */ +#define HWEX_MSR_BIT (1 << 8) + +#if CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR +#define __enable_hw_exceptions() \ + __asm__ __volatile__ (" msrset r0, %0; \ + nop;" \ + : \ + : "i" (HWEX_MSR_BIT) \ + : "memory") + +#define __disable_hw_exceptions() \ + __asm__ __volatile__ (" msrclr r0, %0; \ + nop;" \ + : \ + : "i" (HWEX_MSR_BIT) \ + : "memory") +#else /* !CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR */ +#define __enable_hw_exceptions() \ + __asm__ __volatile__ (" \ + mfs r12, rmsr; \ + nop; \ + ori r12, r12, %0; \ + mts rmsr, r12; \ + nop;" \ + : \ + : "i" (HWEX_MSR_BIT) \ + : "memory", "r12") + +#define __disable_hw_exceptions() \ + __asm__ __volatile__ (" \ + mfs r12, rmsr; \ + nop; \ + andi r12, r12, ~%0; \ + mts rmsr, r12; \ + nop;" \ + : \ + : "i" (HWEX_MSR_BIT) \ + : "memory", "r12") +#endif /* CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR */ + +asmlinkage void full_exception(struct pt_regs *regs, unsigned int type, + int fsr, int addr); + +#if defined(CONFIG_XMON) +extern void xmon(struct pt_regs *regs); +extern int xmon_bpt(struct pt_regs *regs); +extern int xmon_sstep(struct pt_regs *regs); +extern int xmon_iabr_match(struct pt_regs *regs); +extern int xmon_dabr_match(struct pt_regs *regs); +extern void (*xmon_fault_handler)(struct pt_regs *regs); + +void (*debugger)(struct pt_regs *regs) = xmon; +int (*debugger_bpt)(struct pt_regs *regs) = xmon_bpt; +int (*debugger_sstep)(struct pt_regs *regs) = xmon_sstep; +int (*debugger_iabr_match)(struct pt_regs *regs) = xmon_iabr_match; +int (*debugger_dabr_match)(struct pt_regs *regs) = xmon_dabr_match; +void (*debugger_fault_handler)(struct pt_regs *regs); +#elif defined(CONFIG_KGDB) +void (*debugger)(struct pt_regs *regs); +int (*debugger_bpt)(struct pt_regs *regs); +int (*debugger_sstep)(struct pt_regs *regs); +int (*debugger_iabr_match)(struct pt_regs *regs); +int (*debugger_dabr_match)(struct pt_regs *regs); +void (*debugger_fault_handler)(struct pt_regs *regs); +#else +#define debugger(regs) do { } while (0) +#define debugger_bpt(regs) 0 +#define debugger_sstep(regs) 0 +#define debugger_iabr_match(regs) 0 +#define debugger_dabr_match(regs) 0 +#define debugger_fault_handler ((void (*)(struct pt_regs *))0) +#endif + +#endif /*__ASSEMBLY__ */ +#endif /* __KERNEL__ */ +#endif /* _ASM_MICROBLAZE_EXCEPTIONS_H */ diff --git a/arch/microblaze/kernel/exceptions.c b/arch/microblaze/kernel/exceptions.c new file mode 100644 index 00000000000..4a8a4064c7e --- /dev/null +++ b/arch/microblaze/kernel/exceptions.c @@ -0,0 +1,124 @@ +/* + * HW exception handling + * + * Copyright (C) 2008-2009 Michal Simek <monstr@monstr.eu> + * Copyright (C) 2008 PetaLogix + * + * This file is subject to the terms and conditions of the GNU General + * Public License. See the file COPYING in the main directory of this + * archive for more details. + */ + +/* + * This file handles the architecture-dependent parts of hardware exceptions + */ + +#include <linux/kernel.h> +#include <linux/signal.h> +#include <linux/sched.h> +#include <linux/kallsyms.h> +#include <linux/module.h> + +#include <asm/exceptions.h> +#include <asm/entry.h> /* For KM CPU var */ +#include <asm/uaccess.h> +#include <asm/errno.h> +#include <asm/ptrace.h> +#include <asm/current.h> + +#define MICROBLAZE_ILL_OPCODE_EXCEPTION 0x02 +#define MICROBLAZE_IBUS_EXCEPTION 0x03 +#define MICROBLAZE_DBUS_EXCEPTION 0x04 +#define MICROBLAZE_DIV_ZERO_EXCEPTION 0x05 +#define MICROBLAZE_FPU_EXCEPTION 0x06 +#define MICROBLAZE_PRIVILEG_EXCEPTION 0x07 + +static DEFINE_SPINLOCK(die_lock); + +void die(const char *str, struct pt_regs *fp, long err) +{ + console_verbose(); + spin_lock_irq(&die_lock); + printk(KERN_WARNING "Oops: %s, sig: %ld\n", str, err); + show_regs(fp); + spin_unlock_irq(&die_lock); + /* do_exit() should take care of panic'ing from an interrupt + * context so we don't handle it here + */ + do_exit(err); +} + +void _exception(int signr, struct pt_regs *regs, int code, unsigned long addr) +{ + siginfo_t info; + + if (kernel_mode(regs)) { + debugger(regs); + die("Exception in kernel mode", regs, signr); + } + info.si_signo = signr; + info.si_errno = 0; + info.si_code = code; + info.si_addr = (void __user *) addr; + force_sig_info(signr, &info, current); +} + +asmlinkage void full_exception(struct pt_regs *regs, unsigned int type, + int fsr, int addr) +{ +#if 0 + printk(KERN_WARNING "Exception %02x in %s mode, FSR=%08x PC=%08x ESR=%08x\n", + type, user_mode(regs) ? "user" : "kernel", fsr, + (unsigned int) regs->pc, (unsigned int) regs->esr); +#endif + + switch (type & 0x1F) { + case MICROBLAZE_ILL_OPCODE_EXCEPTION: + _exception(SIGILL, regs, ILL_ILLOPC, addr); + break; + case MICROBLAZE_IBUS_EXCEPTION: + if (user_mode(regs)) { + printk(KERN_WARNING "Instruction bus error exception in user mode.\n"); + _exception(SIGBUS, regs, BUS_ADRERR, addr); + return; + } + printk(KERN_WARNING "Instruction bus error exception in kernel mode.\n"); + die("bus exception", regs, SIGBUS); + break; + case MICROBLAZE_DBUS_EXCEPTION: + if (user_mode(regs)) { + printk(KERN_WARNING "Data bus error exception in user mode.\n"); + _exception(SIGBUS, regs, BUS_ADRERR, addr); + return; + } + printk(KERN_WARNING "Data bus error exception in kernel mode.\n"); + die("bus exception", regs, SIGBUS); + break; + case MICROBLAZE_DIV_ZERO_EXCEPTION: + printk(KERN_WARNING "Divide by zero exception\n"); + _exception(SIGILL, regs, ILL_ILLOPC, addr); + break; + + case MICROBLAZE_FPU_EXCEPTION: + /* IEEE FP exception */ + /* I removed fsr variable and use code var for storing fsr */ + if (fsr & FSR_IO) + fsr = FPE_FLTINV; + else if (fsr & FSR_OF) + fsr = FPE_FLTOVF; + else if (fsr & FSR_UF) + fsr = FPE_FLTUND; + else if (fsr & FSR_DZ) + fsr = FPE_FLTDIV; + else if (fsr & FSR_DO) + fsr = FPE_FLTRES; + _exception(SIGFPE, regs, fsr, addr); + break; + + default: + printk(KERN_WARNING "Unexpected exception %02x " + "PC=%08x in %s mode\n", type, (unsigned int) addr, + kernel_mode(regs) ? "kernel" : "user"); + } + return; +} diff --git a/arch/microblaze/kernel/hw_exception_handler.S b/arch/microblaze/kernel/hw_exception_handler.S new file mode 100644 index 00000000000..cf9486d9983 --- /dev/null +++ b/arch/microblaze/kernel/hw_exception_handler.S @@ -0,0 +1,458 @@ +/* + * Exception handling for Microblaze + * + * Rewriten interrupt handling + * + * Copyright (C) 2008-2009 Michal Simek <monstr@monstr.eu> + * Copyright (C) 2008-2009 PetaLogix + * + * uClinux customisation (C) 2005 John Williams + * + * MMU code derived from arch/ppc/kernel/head_4xx.S: + * Copyright (C) 1995-1996 Gary Thomas <gdt@linuxppc.org> + * Initial PowerPC version. + * Copyright (C) 1996 Cort Dougan <cort@cs.nmt.edu> + * Rewritten for PReP + * Copyright (C) 1996 Paul Mackerras <paulus@cs.anu.edu.au> + * Low-level exception handers, MMU support, and rewrite. + * Copyright (C) 1997 Dan Malek <dmalek@jlc.net> + * PowerPC 8xx modifications. + * Copyright (C) 1998-1999 TiVo, Inc. + * PowerPC 403GCX modifications. + * Copyright (C) 1999 Grant Erickson <grant@lcse.umn.edu> + * PowerPC 403GCX/405GP modifications. + * Copyright 2000 MontaVista Software Inc. + * PPC405 modifications + * PowerPC 403GCX/405GP modifications. + * Author: MontaVista Software, Inc. + * frank_rowand@mvista.com or source@mvista.com + * debbie_chu@mvista.com + * + * Original code + * Copyright (C) 2004 Xilinx, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +/* + * Here are the handlers which don't require enabling translation + * and calling other kernel code thus we can keep their design very simple + * and do all processing in real mode. All what they need is a valid current + * (that is an issue for the CONFIG_REGISTER_TASK_PTR case) + * This handlers use r3,r4,r5,r6 and optionally r[current] to work therefore + * these registers are saved/restored + * The handlers which require translation are in entry.S --KAA + * + * Microblaze HW Exception Handler + * - Non self-modifying exception handler for the following exception conditions + * - Unalignment + * - Instruction bus error + * - Data bus error + * - Illegal instruction opcode + * - Divide-by-zero + * + * Note we disable interrupts during exception handling, otherwise we will + * possibly get multiple re-entrancy if interrupt handles themselves cause + * exceptions. JW + */ + +#include <asm/exceptions.h> +#include <asm/unistd.h> +#include <asm/page.h> + +#include <asm/entry.h> +#include <asm/current.h> +#include <linux/linkage.h> + +#include <asm/mmu.h> +#include <asm/pgtable.h> +#include <asm/asm-offsets.h> + +/* Helpful Macros */ +#define EX_HANDLER_STACK_SIZ (4*19) +#define NUM_TO_REG(num) r ## num + +#define LWREG_NOP \ + bri ex_handler_unhandled; \ + nop; + +#define SWREG_NOP \ + bri ex_handler_unhandled; \ + nop; + +/* FIXME this is weird - for noMMU kernel is not possible to use brid + * instruction which can shorten executed time + */ + +/* r3 is the source */ +#define R3_TO_LWREG_V(regnum) \ + swi r3, r1, 4 * regnum; \ + bri ex_handler_done; + +/* r3 is the source */ +#define R3_TO_LWREG(regnum) \ + or NUM_TO_REG (regnum), r0, r3; \ + bri ex_handler_done; + +/* r3 is the target */ +#define SWREG_TO_R3_V(regnum) \ + lwi r3, r1, 4 * regnum; \ + bri ex_sw_tail; + +/* r3 is the target */ +#define SWREG_TO_R3(regnum) \ + or r3, r0, NUM_TO_REG (regnum); \ + bri ex_sw_tail; + +.extern other_exception_handler /* Defined in exception.c */ + +/* + * hw_exception_handler - Handler for exceptions + * + * Exception handler notes: + * - Handles all exceptions + * - Does not handle unaligned exceptions during load into r17, r1, r0. + * - Does not handle unaligned exceptions during store from r17 (cannot be + * done) and r1 (slows down common case) + * + * Relevant register structures + * + * EAR - |----|----|----|----|----|----|----|----| + * - < ## 32 bit faulting address ## > + * + * ESR - |----|----|----|----|----| - | - |-----|-----| + * - W S REG EXC + * + * + * STACK FRAME STRUCTURE (for NO_MMU) + * --------------------------------- + * + * +-------------+ + 0 + * | MSR | + * +-------------+ + 4 + * | r1 | + * | . | + * | . | + * | . | + * | . | + * | r18 | + * +-------------+ + 76 + * | . | + * | . | + * + * NO_MMU kernel use the same r0_ram pointed space - look to vmlinux.lds.S + * which is used for storing register values - old style was, that value were + * stored in stack but in case of failure you lost information about register. + * Currently you can see register value in memory in specific place. + * In compare to with previous solution the speed should be the same. + * + * MMU exception handler has different handling compare to no MMU kernel. + * Exception handler use jump table for directing of what happen. For MMU kernel + * is this approach better because MMU relate exception are handled by asm code + * in this file. In compare to with MMU expect of unaligned exception + * is everything handled by C code. + */ + +/* + * every of these handlers is entered having R3/4/5/6/11/current saved on stack + * and clobbered so care should be taken to restore them if someone is going to + * return from exception + */ + +/* wrappers to restore state before coming to entry.S */ + +.global _hw_exception_handler +.section .text +.align 4 +.ent _hw_exception_handler +_hw_exception_handler: + addik r1, r1, -(EX_HANDLER_STACK_SIZ); /* Create stack frame */ + swi r3, r1, PT_R3 + swi r4, r1, PT_R4 + swi r5, r1, PT_R5 + swi r6, r1, PT_R6 + + mfs r5, rmsr; + nop + swi r5, r1, 0; + mfs r4, rbtr /* Save BTR before jumping to handler */ + nop + mfs r3, resr + nop + + andi r5, r3, 0x1000; /* Check ESR[DS] */ + beqi r5, not_in_delay_slot; /* Branch if ESR[DS] not set */ + mfs r17, rbtr; /* ESR[DS] set - return address in BTR */ + nop +not_in_delay_slot: + swi r17, r1, PT_R17 + + andi r5, r3, 0x1F; /* Extract ESR[EXC] */ + + /* Exceptions enabled here. This will allow nested exceptions */ + mfs r6, rmsr; + nop + swi r6, r1, 0; /* RMSR_OFFSET */ + ori r6, r6, 0x100; /* Turn ON the EE bit */ + andi r6, r6, ~2; /* Disable interrupts */ + mts rmsr, r6; + nop + + xori r6, r5, 1; /* 00001 = Unaligned Exception */ + /* Jump to unalignment exception handler */ + beqi r6, handle_unaligned_ex; + +handle_other_ex: /* Handle Other exceptions here */ + /* Save other volatiles before we make procedure calls below */ + swi r7, r1, PT_R7 + swi r8, r1, PT_R8 + swi r9, r1, PT_R9 + swi r10, r1, PT_R10 + swi r11, r1, PT_R11 + swi r12, r1, PT_R12 + swi r14, r1, PT_R14 + swi r15, r1, PT_R15 + swi r18, r1, PT_R18 + + or r5, r1, r0 + andi r6, r3, 0x1F; /* Load ESR[EC] */ + lwi r7, r0, PER_CPU(KM) /* MS: saving current kernel mode to regs */ + swi r7, r1, PT_MODE + mfs r7, rfsr + nop + addk r8, r17, r0; /* Load exception address */ + bralid r15, full_exception; /* Branch to the handler */ + nop; + + /* + * Trigger execution of the signal handler by enabling + * interrupts and calling an invalid syscall. + */ + mfs r5, rmsr; + nop + ori r5, r5, 2; + mts rmsr, r5; /* enable interrupt */ + nop + addi r12, r0, __NR_syscalls; + brki r14, 0x08; + mfs r5, rmsr; /* disable interrupt */ + nop + andi r5, r5, ~2; + mts rmsr, r5; + nop + + lwi r7, r1, PT_R7 + lwi r8, r1, PT_R8 + lwi r9, r1, PT_R9 + lwi r10, r1, PT_R10 + lwi r11, r1, PT_R11 + lwi r12, r1, PT_R12 + lwi r14, r1, PT_R14 + lwi r15, r1, PT_R15 + lwi r18, r1, PT_R18 + + bri ex_handler_done; /* Complete exception handling */ + +/* 0x01 - Unaligned data access exception + * This occurs when a word access is not aligned on a word boundary, + * or when a 16-bit access is not aligned on a 16-bit boundary. + * This handler perform the access, and returns, except for MMU when + * the unaligned address is last on a 4k page or the physical address is + * not found in the page table, in which case unaligned_data_trap is called. + */ +handle_unaligned_ex: + /* Working registers already saved: R3, R4, R5, R6 + * R3 = ESR + * R4 = BTR + */ + mfs r4, rear; + nop + + andi r6, r3, 0x3E0; /* Mask and extract the register operand */ + srl r6, r6; /* r6 >> 5 */ + srl r6, r6; + srl r6, r6; + srl r6, r6; + srl r6, r6; + /* Store the register operand in a temporary location */ + sbi r6, r0, TOPHYS(ex_reg_op); + + andi r6, r3, 0x400; /* Extract ESR[S] */ + bnei r6, ex_sw; +ex_lw: + andi r6, r3, 0x800; /* Extract ESR[W] */ + beqi r6, ex_lhw; + lbui r5, r4, 0; /* Exception address in r4 */ + /* Load a word, byte-by-byte from destination address + and save it in tmp space */ + sbi r5, r0, TOPHYS(ex_tmp_data_loc_0); + lbui r5, r4, 1; + sbi r5, r0, TOPHYS(ex_tmp_data_loc_1); + lbui r5, r4, 2; + sbi r5, r0, TOPHYS(ex_tmp_data_loc_2); + lbui r5, r4, 3; + sbi r5, r0, TOPHYS(ex_tmp_data_loc_3); + /* Get the destination register value into r3 */ + lwi r3, r0, TOPHYS(ex_tmp_data_loc_0); + bri ex_lw_tail; +ex_lhw: + lbui r5, r4, 0; /* Exception address in r4 */ + /* Load a half-word, byte-by-byte from destination + address and save it in tmp space */ + sbi r5, r0, TOPHYS(ex_tmp_data_loc_0); + lbui r5, r4, 1; + sbi r5, r0, TOPHYS(ex_tmp_data_loc_1); + /* Get the destination register value into r3 */ + lhui r3, r0, TOPHYS(ex_tmp_data_loc_0); +ex_lw_tail: + /* Get the destination register number into r5 */ + lbui r5, r0, TOPHYS(ex_reg_op); + /* Form load_word jump table offset (lw_table + (8 * regnum)) */ + la r6, r0, TOPHYS(lw_table); + addk r5, r5, r5; + addk r5, r5, r5; + addk r5, r5, r5; + addk r5, r5, r6; + bra r5; +ex_lw_end: /* Exception handling of load word, ends */ +ex_sw: + /* Get the destination register number into r5 */ + lbui r5, r0, TOPHYS(ex_reg_op); + /* Form store_word jump table offset (sw_table + (8 * regnum)) */ + la r6, r0, TOPHYS(sw_table); + add r5, r5, r5; + add r5, r5, r5; + add r5, r5, r5; + add r5, r5, r6; + bra r5; +ex_sw_tail: + mfs r6, resr; + nop + andi r6, r6, 0x800; /* Extract ESR[W] */ + beqi r6, ex_shw; + /* Get the word - delay slot */ + swi r3, r0, TOPHYS(ex_tmp_data_loc_0); + /* Store the word, byte-by-byte into destination address */ + lbui r3, r0, TOPHYS(ex_tmp_data_loc_0); + sbi r3, r4, 0; + lbui r3, r0, TOPHYS(ex_tmp_data_loc_1); + sbi r3, r4, 1; + lbui r3, r0, TOPHYS(ex_tmp_data_loc_2); + sbi r3, r4, 2; + lbui r3, r0, TOPHYS(ex_tmp_data_loc_3); + sbi r3, r4, 3; + bri ex_handler_done; + +ex_shw: + /* Store the lower half-word, byte-by-byte into destination address */ + swi r3, r0, TOPHYS(ex_tmp_data_loc_0); + lbui r3, r0, TOPHYS(ex_tmp_data_loc_2); + sbi r3, r4, 0; + lbui r3, r0, TOPHYS(ex_tmp_data_loc_3); + sbi r3, r4, 1; +ex_sw_end: /* Exception handling of store word, ends. */ + +ex_handler_done: + lwi r5, r1, 0 /* RMSR */ + mts rmsr, r5 + nop + lwi r3, r1, PT_R3 + lwi r4, r1, PT_R4 + lwi r5, r1, PT_R5 + lwi r6, r1, PT_R6 + lwi r17, r1, PT_R17 + + rted r17, 0 + addik r1, r1, (EX_HANDLER_STACK_SIZ); /* Restore stack frame */ + +.end _hw_exception_handler + +ex_handler_unhandled: +/* FIXME add handle function for unhandled exception - dump register */ + bri 0 + +.section .text +.align 4 +lw_table: +lw_r0: R3_TO_LWREG (0); +lw_r1: LWREG_NOP; +lw_r2: R3_TO_LWREG (2); +lw_r3: R3_TO_LWREG_V (3); +lw_r4: R3_TO_LWREG_V (4); +lw_r5: R3_TO_LWREG_V (5); +lw_r6: R3_TO_LWREG_V (6); +lw_r7: R3_TO_LWREG (7); +lw_r8: R3_TO_LWREG (8); +lw_r9: R3_TO_LWREG (9); +lw_r10: R3_TO_LWREG (10); +lw_r11: R3_TO_LWREG (11); +lw_r12: R3_TO_LWREG (12); +lw_r13: R3_TO_LWREG (13); +lw_r14: R3_TO_LWREG (14); +lw_r15: R3_TO_LWREG (15); +lw_r16: R3_TO_LWREG (16); +lw_r17: LWREG_NOP; +lw_r18: R3_TO_LWREG (18); +lw_r19: R3_TO_LWREG (19); +lw_r20: R3_TO_LWREG (20); +lw_r21: R3_TO_LWREG (21); +lw_r22: R3_TO_LWREG (22); +lw_r23: R3_TO_LWREG (23); +lw_r24: R3_TO_LWREG (24); +lw_r25: R3_TO_LWREG (25); +lw_r26: R3_TO_LWREG (26); +lw_r27: R3_TO_LWREG (27); +lw_r28: R3_TO_LWREG (28); +lw_r29: R3_TO_LWREG (29); +lw_r30: R3_TO_LWREG (30); +lw_r31: R3_TO_LWREG (31); + +sw_table: +sw_r0: SWREG_TO_R3 (0); +sw_r1: SWREG_NOP; +sw_r2: SWREG_TO_R3 (2); +sw_r3: SWREG_TO_R3_V (3); +sw_r4: SWREG_TO_R3_V (4); +sw_r5: SWREG_TO_R3_V (5); +sw_r6: SWREG_TO_R3_V (6); +sw_r7: SWREG_TO_R3 (7); +sw_r8: SWREG_TO_R3 (8); +sw_r9: SWREG_TO_R3 (9); +sw_r10: SWREG_TO_R3 (10); +sw_r11: SWREG_TO_R3 (11); +sw_r12: SWREG_TO_R3 (12); +sw_r13: SWREG_TO_R3 (13); +sw_r14: SWREG_TO_R3 (14); +sw_r15: SWREG_TO_R3 (15); +sw_r16: SWREG_TO_R3 (16); +sw_r17: SWREG_NOP; +sw_r18: SWREG_TO_R3 (18); +sw_r19: SWREG_TO_R3 (19); +sw_r20: SWREG_TO_R3 (20); +sw_r21: SWREG_TO_R3 (21); +sw_r22: SWREG_TO_R3 (22); +sw_r23: SWREG_TO_R3 (23); +sw_r24: SWREG_TO_R3 (24); +sw_r25: SWREG_TO_R3 (25); +sw_r26: SWREG_TO_R3 (26); +sw_r27: SWREG_TO_R3 (27); +sw_r28: SWREG_TO_R3 (28); +sw_r29: SWREG_TO_R3 (29); +sw_r30: SWREG_TO_R3 (30); +sw_r31: SWREG_TO_R3 (31); + +/* Temporary data structures used in the handler */ +.section .data +.align 4 +ex_tmp_data_loc_0: + .byte 0 +ex_tmp_data_loc_1: + .byte 0 +ex_tmp_data_loc_2: + .byte 0 +ex_tmp_data_loc_3: + .byte 0 +ex_reg_op: + .byte 0 |