diff options
Diffstat (limited to 'drivers/block')
-rw-r--r-- | drivers/block/DAC960.c | 157 | ||||
-rw-r--r-- | drivers/block/Kconfig | 12 | ||||
-rw-r--r-- | drivers/block/Makefile | 1 | ||||
-rw-r--r-- | drivers/block/amiflop.c | 6 | ||||
-rw-r--r-- | drivers/block/aoe/aoechr.c | 7 | ||||
-rw-r--r-- | drivers/block/aoe/aoecmd.c | 2 | ||||
-rw-r--r-- | drivers/block/ataflop.c | 4 | ||||
-rw-r--r-- | drivers/block/brd.c | 2 | ||||
-rw-r--r-- | drivers/block/cciss.c | 81 | ||||
-rw-r--r-- | drivers/block/hd.c | 814 | ||||
-rw-r--r-- | drivers/block/paride/pd.c | 20 | ||||
-rw-r--r-- | drivers/block/paride/pg.c | 22 | ||||
-rw-r--r-- | drivers/block/paride/pt.c | 27 | ||||
-rw-r--r-- | drivers/block/pktcdvd.c | 46 | ||||
-rw-r--r-- | drivers/block/viodasd.c | 2 | ||||
-rw-r--r-- | drivers/block/virtio_blk.c | 7 | ||||
-rw-r--r-- | drivers/block/xen-blkfront.c | 48 | ||||
-rw-r--r-- | drivers/block/z2ram.c | 2 |
18 files changed, 1118 insertions, 142 deletions
diff --git a/drivers/block/DAC960.c b/drivers/block/DAC960.c index cd03473f354..a002a381df9 100644 --- a/drivers/block/DAC960.c +++ b/drivers/block/DAC960.c @@ -6628,15 +6628,18 @@ static void DAC960_DestroyProcEntries(DAC960_Controller_T *Controller) * DAC960_gam_ioctl is the ioctl function for performing RAID operations. */ -static int DAC960_gam_ioctl(struct inode *inode, struct file *file, - unsigned int Request, unsigned long Argument) +static long DAC960_gam_ioctl(struct file *file, unsigned int Request, + unsigned long Argument) { - int ErrorCode = 0; + long ErrorCode = 0; if (!capable(CAP_SYS_ADMIN)) return -EACCES; + + lock_kernel(); switch (Request) { case DAC960_IOCTL_GET_CONTROLLER_COUNT: - return DAC960_ControllerCount; + ErrorCode = DAC960_ControllerCount; + break; case DAC960_IOCTL_GET_CONTROLLER_INFO: { DAC960_ControllerInfo_T __user *UserSpaceControllerInfo = @@ -6644,15 +6647,20 @@ static int DAC960_gam_ioctl(struct inode *inode, struct file *file, DAC960_ControllerInfo_T ControllerInfo; DAC960_Controller_T *Controller; int ControllerNumber; - if (UserSpaceControllerInfo == NULL) return -EINVAL; - ErrorCode = get_user(ControllerNumber, + if (UserSpaceControllerInfo == NULL) + ErrorCode = -EINVAL; + else ErrorCode = get_user(ControllerNumber, &UserSpaceControllerInfo->ControllerNumber); - if (ErrorCode != 0) return ErrorCode; + if (ErrorCode != 0) + break;; + ErrorCode = -ENXIO; if (ControllerNumber < 0 || - ControllerNumber > DAC960_ControllerCount - 1) - return -ENXIO; + ControllerNumber > DAC960_ControllerCount - 1) { + break; + } Controller = DAC960_Controllers[ControllerNumber]; - if (Controller == NULL) return -ENXIO; + if (Controller == NULL) + break;; memset(&ControllerInfo, 0, sizeof(DAC960_ControllerInfo_T)); ControllerInfo.ControllerNumber = ControllerNumber; ControllerInfo.FirmwareType = Controller->FirmwareType; @@ -6665,8 +6673,9 @@ static int DAC960_gam_ioctl(struct inode *inode, struct file *file, ControllerInfo.PCI_Address = Controller->PCI_Address; strcpy(ControllerInfo.ModelName, Controller->ModelName); strcpy(ControllerInfo.FirmwareVersion, Controller->FirmwareVersion); - return (copy_to_user(UserSpaceControllerInfo, &ControllerInfo, + ErrorCode = (copy_to_user(UserSpaceControllerInfo, &ControllerInfo, sizeof(DAC960_ControllerInfo_T)) ? -EFAULT : 0); + break; } case DAC960_IOCTL_V1_EXECUTE_COMMAND: { @@ -6684,30 +6693,39 @@ static int DAC960_gam_ioctl(struct inode *inode, struct file *file, int ControllerNumber, DataTransferLength; unsigned char *DataTransferBuffer = NULL; dma_addr_t DataTransferBufferDMA; - if (UserSpaceUserCommand == NULL) return -EINVAL; + if (UserSpaceUserCommand == NULL) { + ErrorCode = -EINVAL; + break; + } if (copy_from_user(&UserCommand, UserSpaceUserCommand, sizeof(DAC960_V1_UserCommand_T))) { ErrorCode = -EFAULT; - goto Failure1a; + break; } ControllerNumber = UserCommand.ControllerNumber; + ErrorCode = -ENXIO; if (ControllerNumber < 0 || ControllerNumber > DAC960_ControllerCount - 1) - return -ENXIO; + break; Controller = DAC960_Controllers[ControllerNumber]; - if (Controller == NULL) return -ENXIO; - if (Controller->FirmwareType != DAC960_V1_Controller) return -EINVAL; + if (Controller == NULL) + break; + ErrorCode = -EINVAL; + if (Controller->FirmwareType != DAC960_V1_Controller) + break; CommandOpcode = UserCommand.CommandMailbox.Common.CommandOpcode; DataTransferLength = UserCommand.DataTransferLength; - if (CommandOpcode & 0x80) return -EINVAL; + if (CommandOpcode & 0x80) + break; if (CommandOpcode == DAC960_V1_DCDB) { if (copy_from_user(&DCDB, UserCommand.DCDB, sizeof(DAC960_V1_DCDB_T))) { ErrorCode = -EFAULT; - goto Failure1a; + break; } - if (DCDB.Channel >= DAC960_V1_MaxChannels) return -EINVAL; + if (DCDB.Channel >= DAC960_V1_MaxChannels) + break; if (!((DataTransferLength == 0 && DCDB.Direction == DAC960_V1_DCDB_NoDataTransfer) || @@ -6717,38 +6735,37 @@ static int DAC960_gam_ioctl(struct inode *inode, struct file *file, (DataTransferLength < 0 && DCDB.Direction == DAC960_V1_DCDB_DataTransferSystemToDevice))) - return -EINVAL; + break; if (((DCDB.TransferLengthHigh4 << 16) | DCDB.TransferLength) != abs(DataTransferLength)) - return -EINVAL; + break; DCDB_IOBUF = pci_alloc_consistent(Controller->PCIDevice, sizeof(DAC960_V1_DCDB_T), &DCDB_IOBUFDMA); - if (DCDB_IOBUF == NULL) - return -ENOMEM; + if (DCDB_IOBUF == NULL) { + ErrorCode = -ENOMEM; + break; + } } + ErrorCode = -ENOMEM; if (DataTransferLength > 0) { DataTransferBuffer = pci_alloc_consistent(Controller->PCIDevice, DataTransferLength, &DataTransferBufferDMA); - if (DataTransferBuffer == NULL) { - ErrorCode = -ENOMEM; - goto Failure1; - } + if (DataTransferBuffer == NULL) + break; memset(DataTransferBuffer, 0, DataTransferLength); } else if (DataTransferLength < 0) { DataTransferBuffer = pci_alloc_consistent(Controller->PCIDevice, -DataTransferLength, &DataTransferBufferDMA); - if (DataTransferBuffer == NULL) { - ErrorCode = -ENOMEM; - goto Failure1; - } + if (DataTransferBuffer == NULL) + break; if (copy_from_user(DataTransferBuffer, UserCommand.DataTransferBuffer, -DataTransferLength)) { ErrorCode = -EFAULT; - goto Failure1; + break; } } if (CommandOpcode == DAC960_V1_DCDB) @@ -6825,8 +6842,7 @@ static int DAC960_gam_ioctl(struct inode *inode, struct file *file, if (DCDB_IOBUF != NULL) pci_free_consistent(Controller->PCIDevice, sizeof(DAC960_V1_DCDB_T), DCDB_IOBUF, DCDB_IOBUFDMA); - Failure1a: - return ErrorCode; + break; } case DAC960_IOCTL_V2_EXECUTE_COMMAND: { @@ -6844,32 +6860,43 @@ static int DAC960_gam_ioctl(struct inode *inode, struct file *file, dma_addr_t DataTransferBufferDMA; unsigned char *RequestSenseBuffer = NULL; dma_addr_t RequestSenseBufferDMA; - if (UserSpaceUserCommand == NULL) return -EINVAL; + + ErrorCode = -EINVAL; + if (UserSpaceUserCommand == NULL) + break; if (copy_from_user(&UserCommand, UserSpaceUserCommand, sizeof(DAC960_V2_UserCommand_T))) { ErrorCode = -EFAULT; - goto Failure2a; + break; } + ErrorCode = -ENXIO; ControllerNumber = UserCommand.ControllerNumber; if (ControllerNumber < 0 || ControllerNumber > DAC960_ControllerCount - 1) - return -ENXIO; + break; Controller = DAC960_Controllers[ControllerNumber]; - if (Controller == NULL) return -ENXIO; - if (Controller->FirmwareType != DAC960_V2_Controller) return -EINVAL; + if (Controller == NULL) + break; + if (Controller->FirmwareType != DAC960_V2_Controller){ + ErrorCode = -EINVAL; + break; + } DataTransferLength = UserCommand.DataTransferLength; + ErrorCode = -ENOMEM; if (DataTransferLength > 0) { DataTransferBuffer = pci_alloc_consistent(Controller->PCIDevice, DataTransferLength, &DataTransferBufferDMA); - if (DataTransferBuffer == NULL) return -ENOMEM; + if (DataTransferBuffer == NULL) + break; memset(DataTransferBuffer, 0, DataTransferLength); } else if (DataTransferLength < 0) { DataTransferBuffer = pci_alloc_consistent(Controller->PCIDevice, -DataTransferLength, &DataTransferBufferDMA); - if (DataTransferBuffer == NULL) return -ENOMEM; + if (DataTransferBuffer == NULL) + break; if (copy_from_user(DataTransferBuffer, UserCommand.DataTransferBuffer, -DataTransferLength)) { @@ -6979,8 +7006,7 @@ static int DAC960_gam_ioctl(struct inode *inode, struct file *file, if (RequestSenseBuffer != NULL) pci_free_consistent(Controller->PCIDevice, RequestSenseLength, RequestSenseBuffer, RequestSenseBufferDMA); - Failure2a: - return ErrorCode; + break; } case DAC960_IOCTL_V2_GET_HEALTH_STATUS: { @@ -6990,21 +7016,33 @@ static int DAC960_gam_ioctl(struct inode *inode, struct file *file, DAC960_V2_HealthStatusBuffer_T HealthStatusBuffer; DAC960_Controller_T *Controller; int ControllerNumber; - if (UserSpaceGetHealthStatus == NULL) return -EINVAL; + if (UserSpaceGetHealthStatus == NULL) { + ErrorCode = -EINVAL; + break; + } if (copy_from_user(&GetHealthStatus, UserSpaceGetHealthStatus, - sizeof(DAC960_V2_GetHealthStatus_T))) - return -EFAULT; + sizeof(DAC960_V2_GetHealthStatus_T))) { + ErrorCode = -EFAULT; + break; + } + ErrorCode = -ENXIO; ControllerNumber = GetHealthStatus.ControllerNumber; if (ControllerNumber < 0 || ControllerNumber > DAC960_ControllerCount - 1) - return -ENXIO; + break; Controller = DAC960_Controllers[ControllerNumber]; - if (Controller == NULL) return -ENXIO; - if (Controller->FirmwareType != DAC960_V2_Controller) return -EINVAL; + if (Controller == NULL) + break; + if (Controller->FirmwareType != DAC960_V2_Controller) { + ErrorCode = -EINVAL; + break; + } if (copy_from_user(&HealthStatusBuffer, GetHealthStatus.HealthStatusBuffer, - sizeof(DAC960_V2_HealthStatusBuffer_T))) - return -EFAULT; + sizeof(DAC960_V2_HealthStatusBuffer_T))) { + ErrorCode = -EFAULT; + break; + } while (Controller->V2.HealthStatusBuffer->StatusChangeCounter == HealthStatusBuffer.StatusChangeCounter && Controller->V2.HealthStatusBuffer->NextEventSequenceNumber @@ -7012,21 +7050,28 @@ static int DAC960_gam_ioctl(struct inode *inode, struct file *file, { interruptible_sleep_on_timeout(&Controller->HealthStatusWaitQueue, DAC960_MonitoringTimerInterval); - if (signal_pending(current)) return -EINTR; + if (signal_pending(current)) { + ErrorCode = -EINTR; + break; + } } if (copy_to_user(GetHealthStatus.HealthStatusBuffer, Controller->V2.HealthStatusBuffer, sizeof(DAC960_V2_HealthStatusBuffer_T))) - return -EFAULT; - return 0; + ErrorCode = -EFAULT; + else + ErrorCode = 0; } + default: + ErrorCode = -ENOTTY; } - return -EINVAL; + unlock_kernel(); + return ErrorCode; } static const struct file_operations DAC960_gam_fops = { .owner = THIS_MODULE, - .ioctl = DAC960_gam_ioctl + .unlocked_ioctl = DAC960_gam_ioctl }; static struct miscdevice DAC960_gam_dev = { diff --git a/drivers/block/Kconfig b/drivers/block/Kconfig index 0d1d2133d9b..61ad8d639ba 100644 --- a/drivers/block/Kconfig +++ b/drivers/block/Kconfig @@ -433,4 +433,16 @@ config VIRTIO_BLK This is the virtual block driver for virtio. It can be used with lguest or QEMU based VMMs (like KVM or Xen). Say Y or M. +config BLK_DEV_HD + bool "Very old hard disk (MFM/RLL/IDE) driver" + depends on HAVE_IDE + depends on !ARM || ARCH_RPC || ARCH_SHARK || BROKEN + help + This is a very old hard disk driver that lacks the enhanced + functionality of the newer ones. + + It is required for systems with ancient MFM/RLL/ESDI drives. + + If unsure, say N. + endif # BLK_DEV diff --git a/drivers/block/Makefile b/drivers/block/Makefile index 5e584306be9..204332b2957 100644 --- a/drivers/block/Makefile +++ b/drivers/block/Makefile @@ -29,5 +29,6 @@ obj-$(CONFIG_VIRTIO_BLK) += virtio_blk.o obj-$(CONFIG_VIODASD) += viodasd.o obj-$(CONFIG_BLK_DEV_SX8) += sx8.o obj-$(CONFIG_BLK_DEV_UB) += ub.o +obj-$(CONFIG_BLK_DEV_HD) += hd.o obj-$(CONFIG_XEN_BLKDEV_FRONTEND) += xen-blkfront.o diff --git a/drivers/block/amiflop.c b/drivers/block/amiflop.c index c9751b2b57e..7516baff3bb 100644 --- a/drivers/block/amiflop.c +++ b/drivers/block/amiflop.c @@ -1714,10 +1714,10 @@ static int __init amiga_floppy_init(void) int i, ret; if (!MACH_IS_AMIGA) - return -ENXIO; + return -ENODEV; if (!AMIGAHW_PRESENT(AMI_FLOPPY)) - return -ENXIO; + return -ENODEV; if (register_blkdev(FLOPPY_MAJOR,"fd")) return -EBUSY; @@ -1755,7 +1755,7 @@ static int __init amiga_floppy_init(void) if (!floppy_queue) goto out_queue; - ret = -ENXIO; + ret = -ENODEV; if (fd_probe_drives() < 1) /* No usable drives */ goto out_probe; diff --git a/drivers/block/aoe/aoechr.c b/drivers/block/aoe/aoechr.c index e8e60e7a2e7..d1de68a3192 100644 --- a/drivers/block/aoe/aoechr.c +++ b/drivers/block/aoe/aoechr.c @@ -7,6 +7,7 @@ #include <linux/hdreg.h> #include <linux/blkdev.h> #include <linux/delay.h> +#include <linux/smp_lock.h> #include "aoe.h" enum { @@ -174,12 +175,16 @@ aoechr_open(struct inode *inode, struct file *filp) { int n, i; + lock_kernel(); n = iminor(inode); filp->private_data = (void *) (unsigned long) n; for (i = 0; i < ARRAY_SIZE(chardevs); ++i) - if (chardevs[i].minor == n) + if (chardevs[i].minor == n) { + unlock_kernel(); return 0; + } + unlock_kernel(); return -EINVAL; } diff --git a/drivers/block/aoe/aoecmd.c b/drivers/block/aoe/aoecmd.c index 41f818be2f7..2f1746295d0 100644 --- a/drivers/block/aoe/aoecmd.c +++ b/drivers/block/aoe/aoecmd.c @@ -1003,7 +1003,7 @@ aoecmd_cfg_rsp(struct sk_buff *skb) * Enough people have their dip switches set backwards to * warrant a loud message for this special case. */ - aoemajor = be16_to_cpu(get_unaligned(&h->major)); + aoemajor = get_unaligned_be16(&h->major); if (aoemajor == 0xfff) { printk(KERN_ERR "aoe: Warning: shelf address is all ones. " "Check shelf dip switches.\n"); diff --git a/drivers/block/ataflop.c b/drivers/block/ataflop.c index 424995073c6..49f274197b1 100644 --- a/drivers/block/ataflop.c +++ b/drivers/block/ataflop.c @@ -1880,11 +1880,11 @@ static int __init atari_floppy_init (void) if (!MACH_IS_ATARI) /* Amiga, Mac, ... don't have Atari-compatible floppy :-) */ - return -ENXIO; + return -ENODEV; if (MACH_IS_HADES) /* Hades doesn't have Atari-compatible floppy */ - return -ENXIO; + return -ENODEV; if (register_blkdev(FLOPPY_MAJOR,"fd")) return -EBUSY; diff --git a/drivers/block/brd.c b/drivers/block/brd.c index a196ef7f147..24b97b0bef9 100644 --- a/drivers/block/brd.c +++ b/drivers/block/brd.c @@ -397,6 +397,7 @@ module_param(max_part, int, 0); MODULE_PARM_DESC(max_part, "Maximum number of partitions per RAM disk"); MODULE_LICENSE("GPL"); MODULE_ALIAS_BLOCKDEV_MAJOR(RAMDISK_MAJOR); +MODULE_ALIAS("rd"); #ifndef MODULE /* Legacy boot options - nonmodular */ @@ -447,6 +448,7 @@ static struct brd_device *brd_alloc(int i) disk->fops = &brd_fops; disk->private_data = brd; disk->queue = brd->brd_queue; + disk->flags |= GENHD_FL_SUPPRESS_PARTITION_INFO; sprintf(disk->disk_name, "ram%d", i); set_capacity(disk, rd_size * 2); diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c index e336b05fe4a..d81632cd7d0 100644 --- a/drivers/block/cciss.c +++ b/drivers/block/cciss.c @@ -53,15 +53,16 @@ #include <linux/scatterlist.h> #define CCISS_DRIVER_VERSION(maj,min,submin) ((maj<<16)|(min<<8)|(submin)) -#define DRIVER_NAME "HP CISS Driver (v 3.6.14)" -#define DRIVER_VERSION CCISS_DRIVER_VERSION(3,6,14) +#define DRIVER_NAME "HP CISS Driver (v 3.6.20)" +#define DRIVER_VERSION CCISS_DRIVER_VERSION(3, 6, 20) /* Embedded module documentation macros - see modules.h */ MODULE_AUTHOR("Hewlett-Packard Company"); -MODULE_DESCRIPTION("Driver for HP Controller SA5xxx SA6xxx version 3.6.14"); +MODULE_DESCRIPTION("Driver for HP Smart Array Controllers"); MODULE_SUPPORTED_DEVICE("HP SA5i SA5i+ SA532 SA5300 SA5312 SA641 SA642 SA6400" - " SA6i P600 P800 P400 P400i E200 E200i E500"); -MODULE_VERSION("3.6.14"); + " SA6i P600 P800 P400 P400i E200 E200i E500 P700m" + " Smart Array G2 Series SAS/SATA Controllers"); +MODULE_VERSION("3.6.20"); MODULE_LICENSE("GPL"); #include "cciss_cmd.h" @@ -90,6 +91,11 @@ static const struct pci_device_id cciss_pci_device_id[] = { {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSD, 0x103C, 0x3215}, {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSC, 0x103C, 0x3237}, {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSC, 0x103C, 0x323D}, + {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x3241}, + {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x3243}, + {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x3245}, + {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x3247}, + {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x3249}, {PCI_VENDOR_ID_HP, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_STORAGE_RAID << 8, 0xffff << 8, 0}, {0,} @@ -100,30 +106,34 @@ MODULE_DEVICE_TABLE(pci, cciss_pci_device_id); /* board_id = Subsystem Device ID & Vendor ID * product = Marketing Name for the board * access = Address of the struct of function pointers - * nr_cmds = Number of commands supported by controller */ static struct board_type products[] = { - {0x40700E11, "Smart Array 5300", &SA5_access, 512}, - {0x40800E11, "Smart Array 5i", &SA5B_access, 512}, - {0x40820E11, "Smart Array 532", &SA5B_access, 512}, - {0x40830E11, "Smart Array 5312", &SA5B_access, 512}, - {0x409A0E11, "Smart Array 641", &SA5_access, 512}, - {0x409B0E11, "Smart Array 642", &SA5_access, 512}, - {0x409C0E11, "Smart Array 6400", &SA5_access, 512}, - {0x409D0E11, "Smart Array 6400 EM", &SA5_access, 512}, - {0x40910E11, "Smart Array 6i", &SA5_access, 512}, - {0x3225103C, "Smart Array P600", &SA5_access, 512}, - {0x3223103C, "Smart Array P800", &SA5_access, 512}, - {0x3234103C, "Smart Array P400", &SA5_access, 512}, - {0x3235103C, "Smart Array P400i", &SA5_access, 512}, - {0x3211103C, "Smart Array E200i", &SA5_access, 120}, - {0x3212103C, "Smart Array E200", &SA5_access, 120}, - {0x3213103C, "Smart Array E200i", &SA5_access, 120}, - {0x3214103C, "Smart Array E200i", &SA5_access, 120}, - {0x3215103C, "Smart Array E200i", &SA5_access, 120}, - {0x3237103C, "Smart Array E500", &SA5_access, 512}, - {0x323D103C, "Smart Array P700m", &SA5_access, 512}, - {0xFFFF103C, "Unknown Smart Array", &SA5_access, 120}, + {0x40700E11, "Smart Array 5300", &SA5_access}, + {0x40800E11, "Smart Array 5i", &SA5B_access}, + {0x40820E11, "Smart Array 532", &SA5B_access}, + {0x40830E11, "Smart Array 5312", &SA5B_access}, + {0x409A0E11, "Smart Array 641", &SA5_access}, + {0x409B0E11, "Smart Array 642", &SA5_access}, + {0x409C0E11, "Smart Array 6400", &SA5_access}, + {0x409D0E11, "Smart Array 6400 EM", &SA5_access}, + {0x40910E11, "Smart Array 6i", &SA5_access}, + {0x3225103C, "Smart Array P600", &SA5_access}, + {0x3223103C, "Smart Array P800", &SA5_access}, + {0x3234103C, "Smart Array P400", &SA5_access}, + {0x3235103C, "Smart Array P400i", &SA5_access}, + {0x3211103C, "Smart Array E200i", &SA5_access}, + {0x3212103C, "Smart Array E200", &SA5_access}, + {0x3213103C, "Smart Array E200i", &SA5_access}, + {0x3214103C, "Smart Array E200i", &SA5_access}, + {0x3215103C, "Smart Array E200i", &SA5_access}, + {0x3237103C, "Smart Array E500", &SA5_access}, + {0x323D103C, "Smart Array P700m", &SA5_access}, + {0x3241103C, "Smart Array P212", &SA5_access}, + {0x3243103C, "Smart Array P410", &SA5_access}, + {0x3245103C, "Smart Array P410i", &SA5_access}, + {0x3247103C, "Smart Array P411", &SA5_access}, + {0x3249103C, "Smart Array P812", &SA5_access}, + {0xFFFF103C, "Unknown Smart Array", &SA5_access}, }; /* How long to wait (in milliseconds) for board to go into simple mode */ @@ -3075,11 +3085,20 @@ static int __devinit cciss_pci_init(ctlr_info_t *c, struct pci_dev *pdev) print_cfg_table(c->cfgtable); #endif /* CCISS_DEBUG */ + /* Some controllers support Zero Memory Raid (ZMR). + * When configured in ZMR mode the number of supported + * commands drops to 64. So instead of just setting an + * arbitrary value we make the driver a little smarter. + * We read the config table to tell us how many commands + * are supported on the controller then subtract 4 to + * leave a little room for ioctl calls. + */ + c->max_commands = readl(&(c->cfgtable->CmdsOutMax)); for (i = 0; i < ARRAY_SIZE(products); i++) { if (board_id == products[i].board_id) { c->product_name = products[i].product_name; c->access = *(products[i].access); - c->nr_cmds = products[i].nr_cmds; + c->nr_cmds = c->max_commands - 4; break; } } @@ -3099,7 +3118,7 @@ static int __devinit cciss_pci_init(ctlr_info_t *c, struct pci_dev *pdev) if (subsystem_vendor_id == PCI_VENDOR_ID_HP) { c->product_name = products[i-1].product_name; c->access = *(products[i-1].access); - c->nr_cmds = products[i-1].nr_cmds; + c->nr_cmds = c->max_commands - 4; printk(KERN_WARNING "cciss: This is an unknown " "Smart Array controller.\n" "cciss: Please update to the latest driver " @@ -3535,6 +3554,10 @@ static int __devinit cciss_init_one(struct pci_dev *pdev, for (j = 0; j <= hba[i]->highest_lun; j++) add_disk(hba[i]->gendisk[j]); + /* we must register the controller even if no disks exist */ + if (hba[i]->highest_lun == -1) + add_disk(hba[i]->gendisk[0]); + return 1; clean4: diff --git a/drivers/block/hd.c b/drivers/block/hd.c new file mode 100644 index 00000000000..682243bf2e4 --- /dev/null +++ b/drivers/block/hd.c @@ -0,0 +1,814 @@ +/* + * Copyright (C) 1991, 1992 Linus Torvalds + * + * This is the low-level hd interrupt support. It traverses the + * request-list, using interrupts to jump between functions. As + * all the functions are called within interrupts, we may not + * sleep. Special care is recommended. + * + * modified by Drew Eckhardt to check nr of hd's from the CMOS. + * + * Thanks to Branko Lankester, lankeste@fwi.uva.nl, who found a bug + * in the early extended-partition checks and added DM partitions + * + * IRQ-unmask, drive-id, multiple-mode, support for ">16 heads", + * and general streamlining by Mark Lord. + * + * Removed 99% of above. Use Mark's ide driver for those options. + * This is now a lightweight ST-506 driver. (Paul Gortmaker) + * + * Modified 1995 Russell King for ARM processor. + * + * Bugfix: max_sectors must be <= 255 or the wheels tend to come + * off in a hurry once you queue things up - Paul G. 02/2001 + */ + +/* Uncomment the following if you want verbose error reports. */ +/* #define VERBOSE_ERRORS */ + +#include <linux/blkdev.h> +#include <linux/errno.h> +#include <linux/signal.h> +#include <linux/interrupt.h> +#include <linux/timer.h> +#include <linux/fs.h> +#include <linux/kernel.h> +#include <linux/genhd.h> +#include <linux/slab.h> +#include <linux/string.h> +#include <linux/ioport.h> +#include <linux/init.h> +#include <linux/blkpg.h> +#include <linux/hdreg.h> + +#define REALLY_SLOW_IO +#include <asm/system.h> +#include <asm/io.h> +#include <asm/uaccess.h> + +#ifdef __arm__ +#undef HD_IRQ +#endif +#include <asm/irq.h> +#ifdef __arm__ +#define HD_IRQ IRQ_HARDDISK +#endif + +/* Hd controller regster ports */ + +#define HD_DATA 0x1f0 /* _CTL when writing */ +#define HD_ERROR 0x1f1 /* see err-bits */ +#define HD_NSECTOR 0x1f2 /* nr of sectors to read/write */ +#define HD_SECTOR 0x1f3 /* starting sector */ +#define HD_LCYL 0x1f4 /* starting cylinder */ +#define HD_HCYL 0x1f5 /* high byte of starting cyl */ +#define HD_CURRENT 0x1f6 /* 101dhhhh , d=drive, hhhh=head */ +#define HD_STATUS 0x1f7 /* see status-bits */ +#define HD_FEATURE HD_ERROR /* same io address, read=error, write=feature */ +#define HD_PRECOMP HD_FEATURE /* obsolete use of this port - predates IDE */ +#define HD_COMMAND HD_STATUS /* same io address, read=status, write=cmd */ + +#define HD_CMD 0x3f6 /* used for resets */ +#define HD_ALTSTATUS 0x3f6 /* same as HD_STATUS but doesn't clear irq */ + +/* Bits of HD_STATUS */ +#define ERR_STAT 0x01 +#define INDEX_STAT 0x02 +#define ECC_STAT 0x04 /* Corrected error */ +#define DRQ_STAT 0x08 +#define SEEK_STAT 0x10 +#define SERVICE_STAT SEEK_STAT +#define WRERR_STAT 0x20 +#define READY_STAT 0x40 +#define BUSY_STAT 0x80 + +/* Bits for HD_ERROR */ +#define MARK_ERR 0x01 /* Bad address mark */ +#define TRK0_ERR 0x02 /* couldn't find track 0 */ +#define ABRT_ERR 0x04 /* Command aborted */ +#define MCR_ERR 0x08 /* media change request */ +#define ID_ERR 0x10 /* ID field not found */ +#define MC_ERR 0x20 /* media changed */ +#define ECC_ERR 0x40 /* Uncorrectable ECC error */ +#define BBD_ERR 0x80 /* pre-EIDE meaning: block marked bad */ +#define ICRC_ERR 0x80 /* new meaning: CRC error during transfer */ + +static DEFINE_SPINLOCK(hd_lock); +static struct request_queue *hd_queue; + +#define MAJOR_NR HD_MAJOR +#define QUEUE (hd_queue) +#define CURRENT elv_next_request(hd_queue) + +#define TIMEOUT_VALUE (6*HZ) +#define HD_DELAY 0 + +#define MAX_ERRORS 16 /* Max read/write errors/sector */ +#define RESET_FREQ 8 /* Reset controller every 8th retry */ +#define RECAL_FREQ 4 /* Recalibrate every 4th retry */ +#define MAX_HD 2 + +#define STAT_OK (READY_STAT|SEEK_STAT) +#define OK_STATUS(s) (((s)&(STAT_OK|(BUSY_STAT|WRERR_STAT|ERR_STAT)))==STAT_OK) + +static void recal_intr(void); +static void bad_rw_intr(void); + +static int reset; +static int hd_error; + +/* + * This struct defines the HD's and their types. + */ +struct hd_i_struct { + unsigned int head, sect, cyl, wpcom, lzone, ctl; + int unit; + int recalibrate; + int special_op; +}; + +#ifdef HD_TYPE +static struct hd_i_struct hd_info[] = { HD_TYPE }; +static int NR_HD = ARRAY_SIZE(hd_info); +#else +static struct hd_i_struct hd_info[MAX_HD]; +static int NR_HD; +#endif + +static struct gendisk *hd_gendisk[MAX_HD]; + +static struct timer_list device_timer; + +#define TIMEOUT_VALUE (6*HZ) + +#define SET_TIMER \ + do { \ + mod_timer(&device_timer, jiffies + TIMEOUT_VALUE); \ + } while (0) + +static void (*do_hd)(void) = NULL; +#define SET_HANDLER(x) \ +if ((do_hd = (x)) != NULL) \ + SET_TIMER; \ +else \ + del_timer(&device_timer); + + +#if (HD_DELAY > 0) + +#include <asm/i8253.h> + +unsigned long last_req; + +unsigned long read_timer(void) +{ + unsigned long t, flags; + int i; + + spin_lock_irqsave(&i8253_lock, flags); + t = jiffies * 11932; + outb_p(0, 0x43); + i = inb_p(0x40); + i |= inb(0x40) << 8; + spin_unlock_irqrestore(&i8253_lock, flags); + return(t - i); +} +#endif + +static void __init hd_setup(char *str, int *ints) +{ + int hdind = 0; + + if (ints[0] != 3) + return; + if (hd_info[0].head != 0) + hdind = 1; + hd_info[hdind].head = ints[2]; + hd_info[hdind].sect = ints[3]; + hd_info[hdind].cyl = ints[1]; + hd_info[hdind].wpcom = 0; + hd_info[hdind].lzone = ints[1]; + hd_info[hdind].ctl = (ints[2] > 8 ? 8 : 0); + NR_HD = hdind+1; +} + +static void dump_status(const char *msg, unsigned int stat) +{ + char *name = "hd?"; + if (CURRENT) + name = CURRENT->rq_disk->disk_name; + +#ifdef VERBOSE_ERRORS + printk("%s: %s: status=0x%02x { ", name, msg, stat & 0xff); + if (stat & BUSY_STAT) printk("Busy "); + if (stat & READY_STAT) printk("DriveReady "); + if (stat & WRERR_STAT) printk("WriteFault "); + if (stat & SEEK_STAT) printk("SeekComplete "); + if (stat & DRQ_STAT) printk("DataRequest "); + if (stat & ECC_STAT) printk("CorrectedError "); + if (stat & INDEX_STAT) printk("Index "); + if (stat & ERR_STAT) printk("Error "); + printk("}\n"); + if ((stat & ERR_STAT) == 0) { + hd_error = 0; + } else { + hd_error = inb(HD_ERROR); + printk("%s: %s: error=0x%02x { ", name, msg, hd_error & 0xff); + if (hd_error & BBD_ERR) printk("BadSector "); + if (hd_error & ECC_ERR) printk("UncorrectableError "); + if (hd_error & ID_ERR) printk("SectorIdNotFound "); + if (hd_error & ABRT_ERR) printk("DriveStatusError "); + if (hd_error & TRK0_ERR) printk("TrackZeroNotFound "); + if (hd_error & MARK_ERR) printk("AddrMarkNotFound "); + printk("}"); + if (hd_error & (BBD_ERR|ECC_ERR|ID_ERR|MARK_ERR)) { + printk(", CHS=%d/%d/%d", (inb(HD_HCYL)<<8) + inb(HD_LCYL), + inb(HD_CURRENT) & 0xf, inb(HD_SECTOR)); + if (CURRENT) + printk(", sector=%ld", CURRENT->sector); + } + printk("\n"); + } +#else + printk("%s: %s: status=0x%02x.\n", name, msg, stat & 0xff); + if ((stat & ERR_STAT) == 0) { + hd_error = 0; + } else { + hd_error = inb(HD_ERROR); + printk("%s: %s: error=0x%02x.\n", name, msg, hd_error & 0xff); + } +#endif +} + +static void check_status(void) +{ + int i = inb_p(HD_STATUS); + + if (!OK_STATUS(i)) { + dump_status("check_status", i); + bad_rw_intr(); + } +} + +static int controller_busy(void) +{ + int retries = 100000; + unsigned char status; + + do { + status = inb_p(HD_STATUS); + } while ((status & BUSY_STAT) && --retries); + return status; +} + +static int status_ok(void) +{ + unsigned char status = inb_p(HD_STATUS); + + if (status & BUSY_STAT) + return 1; /* Ancient, but does it make sense??? */ + if (status & WRERR_STAT) + return 0; + if (!(status & READY_STAT)) + return 0; + if (!(status & SEEK_STAT)) + return 0; + return 1; +} + +static int controller_ready(unsigned int drive, unsigned int head) +{ + int retry = 100; + + do { + if (controller_busy() & BUSY_STAT) + return 0; + outb_p(0xA0 | (drive<<4) | head, HD_CURRENT); + if (status_ok()) + return 1; + } while (--retry); + return 0; +} + +static void hd_out(struct hd_i_struct *disk, + unsigned int nsect, + unsigned int sect, + unsigned int head, + unsigned int cyl, + unsigned int cmd, + void (*intr_addr)(void)) +{ + unsigned short port; + +#if (HD_DELAY > 0) + while (read_timer() - last_req < HD_DELAY) + /* nothing */; +#endif + if (reset) + return; + if (!controller_ready(disk->unit, head)) { + reset = 1; + return; + } + SET_HANDLER(intr_addr); + outb_p(disk->ctl, HD_CMD); + port = HD_DATA; + outb_p(disk->wpcom >> 2, ++port); + outb_p(nsect, ++port); + outb_p(sect, ++port); + outb_p(cyl, ++port); + outb_p(cyl >> 8, ++port); + outb_p(0xA0 | (disk->unit << 4) | head, ++port); + outb_p(cmd, ++port); +} + +static void hd_request (void); + +static int drive_busy(void) +{ + unsigned int i; + unsigned char c; + + for (i = 0; i < 500000 ; i++) { + c = inb_p(HD_STATUS); + if ((c & (BUSY_STAT | READY_STAT | SEEK_STAT)) == STAT_OK) + return 0; + } + dump_status("reset timed out", c); + return 1; +} + +static void reset_controller(void) +{ + int i; + + outb_p(4, HD_CMD); + for (i = 0; i < 1000; i++) barrier(); + outb_p(hd_info[0].ctl & 0x0f, HD_CMD); + for (i = 0; i < 1000; i++) barrier(); + if (drive_busy()) + printk("hd: controller still busy\n"); + else if ((hd_error = inb(HD_ERROR)) != 1) + printk("hd: controller reset failed: %02x\n", hd_error); +} + +static void reset_hd(void) +{ + static int i; + +repeat: + if (reset) { + reset = 0; + i = -1; + reset_controller(); + } else { + check_status(); + if (reset) + goto repeat; + } + if (++i < NR_HD) { + struct hd_i_struct *disk = &hd_info[i]; + disk->special_op = disk->recalibrate = 1; + hd_out(disk, disk->sect, disk->sect, disk->head-1, + disk->cyl, WIN_SPECIFY, &reset_hd); + if (reset) + goto repeat; + } else + hd_request(); +} + +/* + * Ok, don't know what to do with the unexpected interrupts: on some machines + * doing a reset and a retry seems to result in an eternal loop. Right now I + * ignore it, and just set the timeout. + * + * On laptops (and "green" PCs), an unexpected interrupt occurs whenever the + * drive enters "idle", "standby", or "sleep" mode, so if the status looks + * "good", we just ignore the interrupt completely. + */ +static void unexpected_hd_interrupt(void) +{ + unsigned int stat = inb_p(HD_STATUS); + + if (stat & (BUSY_STAT|DRQ_STAT|ECC_STAT|ERR_STAT)) { + dump_status("unexpected interrupt", stat); + SET_TIMER; + } +} + +/* + * bad_rw_intr() now tries to be a bit smarter and does things + * according to the error returned by the controller. + * -Mika Liljeberg (liljeber@cs.Helsinki.FI) + */ +static void bad_rw_intr(void) +{ + struct request *req = CURRENT; + if (req != NULL) { + struct hd_i_struct *disk = req->rq_disk->private_data; + if (++req->errors >= MAX_ERRORS || (hd_error & BBD_ERR)) { + end_request(req, 0); + disk->special_op = disk->recalibrate = 1; + } else if (req->errors % RESET_FREQ == 0) + reset = 1; + else if ((hd_error & TRK0_ERR) || req->errors % RECAL_FREQ == 0) + disk->special_op = disk->recalibrate = 1; + /* Otherwise just retry */ + } +} + +static inline int wait_DRQ(void) +{ + int retries; + int stat; + + for (retries = 0; retries < 100000; retries++) { + stat = inb_p(HD_STATUS); + if (stat & DRQ_STAT) + return 0; + } + dump_status("wait_DRQ", stat); + return -1; +} + +static void read_intr(void) +{ + struct request *req; + int i, retries = 100000; + + do { + i = (unsigned) inb_p(HD_STATUS); + if (i & BUSY_STAT) + continue; + if (!OK_STATUS(i)) + break; + if (i & DRQ_STAT) + goto ok_to_read; + } while (--retries > 0); + dump_status("read_intr", i); + bad_rw_intr(); + hd_request(); + return; +ok_to_read: + req = CURRENT; + insw(HD_DATA, req->buffer, 256); + req->sector++; + req->buffer += 512; + req->errors = 0; + i = --req->nr_sectors; + --req->current_nr_sectors; +#ifdef DEBUG + printk("%s: read: sector %ld, remaining = %ld, buffer=%p\n", + req->rq_disk->disk_name, req->sector, req->nr_sectors, + req->buffer+512); +#endif + if (req->current_nr_sectors <= 0) + end_request(req, 1); + if (i > 0) { + SET_HANDLER(&read_intr); + return; + } + (void) inb_p(HD_STATUS); +#if (HD_DELAY > 0) + last_req = read_timer(); +#endif + if (elv_next_request(QUEUE)) + hd_request(); + return; +} + +static void write_intr(void) +{ + struct request *req = CURRENT; + int i; + int retries = 100000; + + do { + i = (unsigned) inb_p(HD_STATUS); + if (i & BUSY_STAT) + continue; + if (!OK_STATUS(i)) + break; + if ((req->nr_sectors <= 1) || (i & DRQ_STAT)) + goto ok_to_write; + } while (--retries > 0); + dump_status("write_intr", i); + bad_rw_intr(); + hd_request(); + return; +ok_to_write: + req->sector++; + i = --req->nr_sectors; + --req->current_nr_sectors; + req->buffer += 512; + if (!i || (req->bio && req->current_nr_sectors <= 0)) + end_request(req, 1); + if (i > 0) { + SET_HANDLER(&write_intr); + outsw(HD_DATA, req->buffer, 256); + local_irq_enable(); + } else { +#if (HD_DELAY > 0) + last_req = read_timer(); +#endif + hd_request(); + } + return; +} + +static void recal_intr(void) +{ + check_status(); +#if (HD_DELAY > 0) + last_req = read_timer(); +#endif + hd_request(); +} + +/* + * This is another of the error-routines I don't know what to do with. The + * best idea seems to just set reset, and start all over again. + */ +static void hd_times_out(unsigned long dummy) +{ + char *name; + + do_hd = NULL; + + if (!CURRENT) + return; + + disable_irq(HD_IRQ); + local_irq_enable(); + reset = 1; + name = CURRENT->rq_disk->disk_name; + printk("%s: timeout\n", name); + if (++CURRENT->errors >= MAX_ERRORS) { +#ifdef DEBUG + printk("%s: too many errors\n", name); +#endif + end_request(CURRENT, 0); + } + local_irq_disable(); + hd_request(); + enable_irq(HD_IRQ); +} + +static int do_special_op(struct hd_i_struct *disk, struct request *req) +{ + if (disk->recalibrate) { + disk->recalibrate = 0; + hd_out(disk, disk->sect, 0, 0, 0, WIN_RESTORE, &recal_intr); + return reset; + } + if (disk->head > 16) { + printk("%s: cannot handle device with more than 16 heads - giving up\n", req->rq_disk->disk_name); + end_request(req, 0); + } + disk->special_op = 0; + return 1; +} + +/* + * The driver enables interrupts as much as possible. In order to do this, + * (a) the device-interrupt is disabled before entering hd_request(), + * and (b) the timeout-interrupt is disabled before the sti(). + * + * Interrupts are still masked (by default) whenever we are exchanging + * data/cmds with a drive, because some drives seem to have very poor + * tolerance for latency during I/O. The IDE driver has support to unmask + * interrupts for non-broken hardware, so use that driver if required. + */ +static void hd_request(void) +{ + unsigned int block, nsect, sec, track, head, cyl; + struct hd_i_struct *disk; + struct request *req; + + if (do_hd) + return; +repeat: + del_timer(&device_timer); + local_irq_enable(); + + req = CURRENT; + if (!req) { + do_hd = NULL; + return; + } + + if (reset) { + local_irq_disable(); + reset_hd(); + return; + } + disk = req->rq_disk->private_data; + block = req->sector; + nsect = req->nr_sectors; + if (block >= get_capacity(req->rq_disk) || + ((block+nsect) > get_capacity(req->rq_disk))) { + printk("%s: bad access: block=%d, count=%d\n", + req->rq_disk->disk_name, block, nsect); + end_request(req, 0); + goto repeat; + } + + if (disk->special_op) { + if (do_special_op(disk, req)) + goto repeat; + return; + } + sec = block % disk->sect + 1; + track = block / disk->sect; + head = track % disk->head; + cyl = track / disk->head; +#ifdef DEBUG + printk("%s: %sing: CHS=%d/%d/%d, sectors=%d, buffer=%p\n", + req->rq_disk->disk_name, + req_data_dir(req) == READ ? "read" : "writ", + cyl, head, sec, nsect, req->buffer); +#endif + if (blk_fs_request(req)) { + switch (rq_data_dir(req)) { + case READ: + hd_out(disk, nsect, sec, head, cyl, WIN_READ, + &read_intr); + if (reset) + goto repeat; + break; + case WRITE: + hd_out(disk, nsect, sec, head, cyl, WIN_WRITE, + &write_intr); + if (reset) + goto repeat; + if (wait_DRQ()) { + bad_rw_intr(); + goto repeat; + } + outsw(HD_DATA, req->buffer, 256); + break; + default: + printk("unknown hd-command\n"); + end_request(req, 0); + break; + } + } +} + +static void do_hd_request(struct request_queue *q) +{ + disable_irq(HD_IRQ); + hd_request(); + enable_irq(HD_IRQ); +} + +static int hd_getgeo(struct block_device *bdev, struct hd_geometry *geo) +{ + struct hd_i_struct *disk = bdev->bd_disk->private_data; + + geo->heads = disk->head; + geo->sectors = disk->sect; + geo->cylinders = disk->cyl; + return 0; +} + +/* + * Releasing a block device means we sync() it, so that it can safely + * be forgotten about... + */ + +static irqreturn_t hd_interrupt(int irq, void *dev_id) +{ + void (*handler)(void) = do_hd; + + do_hd = NULL; + del_timer(&device_timer); + if (!handler) + handler = unexpected_hd_interrupt; + handler(); + local_irq_enable(); + return IRQ_HANDLED; +} + +static struct block_device_operations hd_fops = { + .getgeo = hd_getgeo, +}; + +/* + * This is the hard disk IRQ description. The IRQF_DISABLED in sa_flags + * means we run the IRQ-handler with interrupts disabled: this is bad for + * interrupt latency, but anything else has led to problems on some + * machines. + * + * We enable interrupts in some of the routines after making sure it's + * safe. + */ + +static int __init hd_init(void) +{ + int drive; + + if (register_blkdev(MAJOR_NR, "hd")) + return -1; + + hd_queue = blk_init_queue(do_hd_request, &hd_lock); + if (!hd_queue) { + unregister_blkdev(MAJOR_NR, "hd"); + return -ENOMEM; + } + + blk_queue_max_sectors(hd_queue, 255); + init_timer(&device_timer); + device_timer.function = hd_times_out; + blk_queue_hardsect_size(hd_queue, 512); + + if (!NR_HD) { + /* + * We don't know anything about the drive. This means + * that you *MUST* specify the drive parameters to the + * kernel yourself. + * + * If we were on an i386, we used to read this info from + * the BIOS or CMOS. This doesn't work all that well, + * since this assumes that this is a primary or secondary + * drive, and if we're using this legacy driver, it's + * probably an auxilliary controller added to recover + * legacy data off an ST-506 drive. Either way, it's + * definitely safest to have the user explicitly specify + * the information. + */ + printk("hd: no drives specified - use hd=cyl,head,sectors" + " on kernel command line\n"); + goto out; + } + + for (drive = 0 ; drive < NR_HD ; drive++) { + struct gendisk *disk = alloc_disk(64); + struct hd_i_struct *p = &hd_info[drive]; + if (!disk) + goto Enomem; + disk->major = MAJOR_NR; + disk->first_minor = drive << 6; + disk->fops = &hd_fops; + sprintf(disk->disk_name, "hd%c", 'a'+drive); + disk->private_data = p; + set_capacity(disk, p->head * p->sect * p->cyl); + disk->queue = hd_queue; + p->unit = drive; + hd_gendisk[drive] = disk; + printk("%s: %luMB, CHS=%d/%d/%d\n", + disk->disk_name, (unsigned long)get_capacity(disk)/2048, + p->cyl, p->head, p->sect); + } + + if (request_irq(HD_IRQ, hd_interrupt, IRQF_DISABLED, "hd", NULL)) { + printk("hd: unable to get IRQ%d for the hard disk driver\n", + HD_IRQ); + goto out1; + } + if (!request_region(HD_DATA, 8, "hd")) { + printk(KERN_WARNING "hd: port 0x%x busy\n", HD_DATA); + goto out2; + } + if (!request_region(HD_CMD, 1, "hd(cmd)")) { + printk(KERN_WARNING "hd: port 0x%x busy\n", HD_CMD); + goto out3; + } + + /* Let them fly */ + for (drive = 0; drive < NR_HD; drive++) + add_disk(hd_gendisk[drive]); + + return 0; + +out3: + release_region(HD_DATA, 8); +out2: + free_irq(HD_IRQ, NULL); +out1: + for (drive = 0; drive < NR_HD; drive++) + put_disk(hd_gendisk[drive]); + NR_HD = 0; +out: + del_timer(&device_timer); + unregister_blkdev(MAJOR_NR, "hd"); + blk_cleanup_queue(hd_queue); + return -1; +Enomem: + while (drive--) + put_disk(hd_gendisk[drive]); + goto out; +} + +static int __init parse_hd_setup(char *line) +{ + int ints[6]; + + (void) get_options(line, ARRAY_SIZE(ints), ints); + hd_setup(NULL, ints); + + return 1; +} +__setup("hd=", parse_hd_setup); + +late_initcall(hd_init); diff --git a/drivers/block/paride/pd.c b/drivers/block/paride/pd.c index 570f3b70dce..5fdfa7c888c 100644 --- a/drivers/block/paride/pd.c +++ b/drivers/block/paride/pd.c @@ -712,19 +712,17 @@ static void do_pd_request(struct request_queue * q) static int pd_special_command(struct pd_unit *disk, enum action (*func)(struct pd_unit *disk)) { - DECLARE_COMPLETION_ONSTACK(wait); - struct request rq; + struct request *rq; int err = 0; - blk_rq_init(NULL, &rq); - rq.rq_disk = disk->gd; - rq.end_io_data = &wait; - rq.end_io = blk_end_sync_rq; - blk_insert_request(disk->gd->queue, &rq, 0, func); - wait_for_completion(&wait); - if (rq.errors) - err = -EIO; - blk_put_request(&rq); + rq = blk_get_request(disk->gd->queue, READ, __GFP_WAIT); + + rq->cmd_type = REQ_TYPE_SPECIAL; + rq->special = func; + + err = blk_execute_rq(disk->gd->queue, disk->gd, rq, 0); + + blk_put_request(rq); return err; } diff --git a/drivers/block/paride/pg.c b/drivers/block/paride/pg.c index ab86e23ddc6..9d92636350e 100644 --- a/drivers/block/paride/pg.c +++ b/drivers/block/paride/pg.c @@ -162,6 +162,7 @@ enum {D_PRT, D_PRO, D_UNI, D_MOD, D_SLV, D_DLY}; #include <linux/pg.h> #include <linux/device.h> #include <linux/sched.h> /* current, TASK_* */ +#include <linux/smp_lock.h> #include <linux/jiffies.h> #include <asm/uaccess.h> @@ -515,12 +516,18 @@ static int pg_open(struct inode *inode, struct file *file) { int unit = iminor(inode) & 0x7f; struct pg *dev = &devices[unit]; + int ret = 0; - if ((unit >= PG_UNITS) || (!dev->present)) - return -ENODEV; + lock_kernel(); + if ((unit >= PG_UNITS) || (!dev->present)) { + ret = -ENODEV; + goto out; + } - if (test_and_set_bit(0, &dev->access)) - return -EBUSY; + if (test_and_set_bit(0, &dev->access)) { + ret = -EBUSY; + goto out; + } if (dev->busy) { pg_reset(dev); @@ -533,12 +540,15 @@ static int pg_open(struct inode *inode, struct file *file) if (dev->bufptr == NULL) { clear_bit(0, &dev->access); printk("%s: buffer allocation failed\n", dev->name); - return -ENOMEM; + ret = -ENOMEM; + goto out; } file->private_data = dev; - return 0; +out: + unlock_kernel(); + return ret; } static int pg_release(struct inode *inode, struct file *file) diff --git a/drivers/block/paride/pt.c b/drivers/block/paride/pt.c index 8b9549ab4a4..5c74c3574a5 100644 --- a/drivers/block/paride/pt.c +++ b/drivers/block/paride/pt.c @@ -146,6 +146,7 @@ static int (*drives[4])[6] = {&drive0, &drive1, &drive2, &drive3}; #include <linux/mtio.h> #include <linux/device.h> #include <linux/sched.h> /* current, TASK_*, schedule_timeout() */ +#include <linux/smp_lock.h> #include <asm/uaccess.h> @@ -189,8 +190,7 @@ module_param_array(drive3, int, NULL, 0); #define ATAPI_LOG_SENSE 0x4d static int pt_open(struct inode *inode, struct file *file); -static int pt_ioctl(struct inode *inode, struct file *file, - unsigned int cmd, unsigned long arg); +static long pt_ioctl(struct file *file, unsigned int cmd, unsigned long arg); static int pt_release(struct inode *inode, struct file *file); static ssize_t pt_read(struct file *filp, char __user *buf, size_t count, loff_t * ppos); @@ -236,7 +236,7 @@ static const struct file_operations pt_fops = { .owner = THIS_MODULE, .read = pt_read, .write = pt_write, - .ioctl = pt_ioctl, + .unlocked_ioctl = pt_ioctl, .open = pt_open, .release = pt_release, }; @@ -650,8 +650,11 @@ static int pt_open(struct inode *inode, struct file *file) struct pt_unit *tape = pt + unit; int err; - if (unit >= PT_UNITS || (!tape->present)) + lock_kernel(); + if (unit >= PT_UNITS || (!tape->present)) { + unlock_kernel(); return -ENODEV; + } err = -EBUSY; if (!atomic_dec_and_test(&tape->available)) @@ -678,15 +681,16 @@ static int pt_open(struct inode *inode, struct file *file) } file->private_data = tape; + unlock_kernel(); return 0; out: atomic_inc(&tape->available); + unlock_kernel(); return err; } -static int pt_ioctl(struct inode *inode, struct file *file, - unsigned int cmd, unsigned long arg) +static long pt_ioctl(struct file *file, unsigned int cmd, unsigned long arg) { struct pt_unit *tape = file->private_data; struct mtop __user *p = (void __user *)arg; @@ -700,23 +704,26 @@ static int pt_ioctl(struct inode *inode, struct file *file, switch (mtop.mt_op) { case MTREW: + lock_kernel(); pt_rewind(tape); + unlock_kernel(); return 0; case MTWEOF: + lock_kernel(); pt_write_fm(tape); + unlock_kernel(); return 0; default: - printk("%s: Unimplemented mt_op %d\n", tape->name, + /* FIXME: rate limit ?? */ + printk(KERN_DEBUG "%s: Unimplemented mt_op %d\n", tape->name, mtop.mt_op); return -EINVAL; } default: - printk("%s: Unimplemented ioctl 0x%x\n", tape->name, cmd); - return -EINVAL; - + return -ENOTTY; } } diff --git a/drivers/block/pktcdvd.c b/drivers/block/pktcdvd.c index 3ba1df93e9e..45bee918c46 100644 --- a/drivers/block/pktcdvd.c +++ b/drivers/block/pktcdvd.c @@ -49,6 +49,7 @@ #include <linux/types.h> #include <linux/kernel.h> #include <linux/kthread.h> +#include <linux/smp_lock.h> #include <linux/errno.h> #include <linux/spinlock.h> #include <linux/file.h> @@ -2079,7 +2080,6 @@ static noinline_for_stack int pkt_write_caching(struct pktcdvd_device *pd, unsigned char buf[64]; int ret; - memset(buf, 0, sizeof(buf)); init_cdrom_command(&cgc, buf, sizeof(buf), CGC_DATA_READ); cgc.sense = &sense; cgc.buflen = pd->mode_offset + 12; @@ -2126,7 +2126,6 @@ static noinline_for_stack int pkt_get_max_speed(struct pktcdvd_device *pd, unsigned char *cap_buf; int ret, offset; - memset(buf, 0, sizeof(buf)); cap_buf = &buf[sizeof(struct mode_page_header) + pd->mode_offset]; init_cdrom_command(&cgc, buf, sizeof(buf), CGC_DATA_UNKNOWN); cgc.sense = &sense; @@ -2633,11 +2632,12 @@ end_io: -static int pkt_merge_bvec(struct request_queue *q, struct bio *bio, struct bio_vec *bvec) +static int pkt_merge_bvec(struct request_queue *q, struct bvec_merge_data *bmd, + struct bio_vec *bvec) { struct pktcdvd_device *pd = q->queuedata; - sector_t zone = ZONE(bio->bi_sector, pd); - int used = ((bio->bi_sector - zone) << 9) + bio->bi_size; + sector_t zone = ZONE(bmd->bi_sector, pd); + int used = ((bmd->bi_sector - zone) << 9) + bmd->bi_size; int remaining = (pd->settings.size << 9) - used; int remaining2; @@ -2645,7 +2645,7 @@ static int pkt_merge_bvec(struct request_queue *q, struct bio *bio, struct bio_v * A bio <= PAGE_SIZE must be allowed. If it crosses a packet * boundary, pkt_make_request() will split the bio. */ - remaining2 = PAGE_SIZE - bio->bi_size; + remaining2 = PAGE_SIZE - bmd->bi_size; remaining = max(remaining, remaining2); BUG_ON(remaining < 0); @@ -2796,9 +2796,14 @@ out_mem: return ret; } -static int pkt_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg) +static long pkt_ioctl(struct file *file, unsigned int cmd, unsigned long arg) { - struct pktcdvd_device *pd = inode->i_bdev->bd_disk->private_data; + struct inode *inode = file->f_path.dentry->d_inode; + struct pktcdvd_device *pd; + long ret; + + lock_kernel(); + pd = inode->i_bdev->bd_disk->private_data; VPRINTK("pkt_ioctl: cmd %x, dev %d:%d\n", cmd, imajor(inode), iminor(inode)); @@ -2811,7 +2816,8 @@ static int pkt_ioctl(struct inode *inode, struct file *file, unsigned int cmd, u case CDROM_LAST_WRITTEN: case CDROM_SEND_PACKET: case SCSI_IOCTL_SEND_COMMAND: - return blkdev_ioctl(pd->bdev->bd_inode, file, cmd, arg); + ret = blkdev_ioctl(pd->bdev->bd_inode, file, cmd, arg); + break; case CDROMEJECT: /* @@ -2820,14 +2826,15 @@ static int pkt_ioctl(struct inode *inode, struct file *file, unsigned int cmd, u */ if (pd->refcnt == 1) pkt_lock_door(pd, 0); - return blkdev_ioctl(pd->bdev->bd_inode, file, cmd, arg); + ret = blkdev_ioctl(pd->bdev->bd_inode, file, cmd, arg); + break; default: VPRINTK(DRIVER_NAME": Unknown ioctl for %s (%x)\n", pd->name, cmd); - return -ENOTTY; + ret = -ENOTTY; } - - return 0; + unlock_kernel(); + return ret; } static int pkt_media_changed(struct gendisk *disk) @@ -2849,7 +2856,7 @@ static struct block_device_operations pktcdvd_ops = { .owner = THIS_MODULE, .open = pkt_open, .release = pkt_close, - .ioctl = pkt_ioctl, + .unlocked_ioctl = pkt_ioctl, .media_changed = pkt_media_changed, }; @@ -3014,7 +3021,8 @@ static void pkt_get_status(struct pkt_ctrl_command *ctrl_cmd) mutex_unlock(&ctl_mutex); } -static int pkt_ctl_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg) +static long pkt_ctl_ioctl(struct file *file, unsigned int cmd, + unsigned long arg) { void __user *argp = (void __user *)arg; struct pkt_ctrl_command ctrl_cmd; @@ -3031,16 +3039,22 @@ static int pkt_ctl_ioctl(struct inode *inode, struct file *file, unsigned int cm case PKT_CTRL_CMD_SETUP: if (!capable(CAP_SYS_ADMIN)) return -EPERM; + lock_kernel(); ret = pkt_setup_dev(new_decode_dev(ctrl_cmd.dev), &pkt_dev); ctrl_cmd.pkt_dev = new_encode_dev(pkt_dev); + unlock_kernel(); break; case PKT_CTRL_CMD_TEARDOWN: if (!capable(CAP_SYS_ADMIN)) return -EPERM; + lock_kernel(); ret = pkt_remove_dev(new_decode_dev(ctrl_cmd.pkt_dev)); + unlock_kernel(); break; case PKT_CTRL_CMD_STATUS: + lock_kernel(); pkt_get_status(&ctrl_cmd); + unlock_kernel(); break; default: return -ENOTTY; @@ -3053,7 +3067,7 @@ static int pkt_ctl_ioctl(struct inode *inode, struct file *file, unsigned int cm static const struct file_operations pkt_ctl_fops = { - .ioctl = pkt_ctl_ioctl, + .unlocked_ioctl = pkt_ctl_ioctl, .owner = THIS_MODULE, }; diff --git a/drivers/block/viodasd.c b/drivers/block/viodasd.c index ebfe038d859..f1c8feb5510 100644 --- a/drivers/block/viodasd.c +++ b/drivers/block/viodasd.c @@ -3,7 +3,7 @@ * Authors: Dave Boutcher <boutcher@us.ibm.com> * Ryan Arnold <ryanarn@us.ibm.com> * Colin Devilbiss <devilbis@us.ibm.com> - * Stephen Rothwell <sfr@au1.ibm.com> + * Stephen Rothwell * * (C) Copyright 2000-2004 IBM Corporation * diff --git a/drivers/block/virtio_blk.c b/drivers/block/virtio_blk.c index 84e064ffee5..dd7ea203f94 100644 --- a/drivers/block/virtio_blk.c +++ b/drivers/block/virtio_blk.c @@ -260,6 +260,10 @@ static int virtblk_probe(struct virtio_device *vdev) if (virtio_has_feature(vdev, VIRTIO_BLK_F_BARRIER)) blk_queue_ordered(vblk->disk->queue, QUEUE_ORDERED_TAG, NULL); + /* If disk is read-only in the host, the guest should obey */ + if (virtio_has_feature(vdev, VIRTIO_BLK_F_RO)) + set_disk_ro(vblk->disk, 1); + /* Host must always specify the capacity. */ vdev->config->get(vdev, offsetof(struct virtio_blk_config, capacity), &cap, sizeof(cap)); @@ -311,6 +315,7 @@ static void virtblk_remove(struct virtio_device *vdev) /* Stop all the virtqueues. */ vdev->config->reset(vdev); + del_gendisk(vblk->disk); blk_cleanup_queue(vblk->disk->queue); put_disk(vblk->disk); mempool_destroy(vblk->pool); @@ -325,7 +330,7 @@ static struct virtio_device_id id_table[] = { static unsigned int features[] = { VIRTIO_BLK_F_BARRIER, VIRTIO_BLK_F_SEG_MAX, VIRTIO_BLK_F_SIZE_MAX, - VIRTIO_BLK_F_GEOMETRY, + VIRTIO_BLK_F_GEOMETRY, VIRTIO_BLK_F_RO, }; static struct virtio_driver virtio_blk = { diff --git a/drivers/block/xen-blkfront.c b/drivers/block/xen-blkfront.c index f2fff5799dd..9ae05c58423 100644 --- a/drivers/block/xen-blkfront.c +++ b/drivers/block/xen-blkfront.c @@ -38,6 +38,7 @@ #include <linux/interrupt.h> #include <linux/blkdev.h> #include <linux/hdreg.h> +#include <linux/cdrom.h> #include <linux/module.h> #include <xen/xenbus.h> @@ -153,6 +154,40 @@ static int blkif_getgeo(struct block_device *bd, struct hd_geometry *hg) return 0; } +int blkif_ioctl(struct inode *inode, struct file *filep, + unsigned command, unsigned long argument) +{ + struct blkfront_info *info = + inode->i_bdev->bd_disk->private_data; + int i; + + dev_dbg(&info->xbdev->dev, "command: 0x%x, argument: 0x%lx\n", + command, (long)argument); + + switch (command) { + case CDROMMULTISESSION: + dev_dbg(&info->xbdev->dev, "FIXME: support multisession CDs later\n"); + for (i = 0; i < sizeof(struct cdrom_multisession); i++) + if (put_user(0, (char __user *)(argument + i))) + return -EFAULT; + return 0; + + case CDROM_GET_CAPABILITY: { + struct gendisk *gd = info->gd; + if (gd->flags & GENHD_FL_CD) + return 0; + return -EINVAL; + } + + default: + /*printk(KERN_ALERT "ioctl %08x not supported by Xen blkdev\n", + command);*/ + return -EINVAL; /* same return as native Linux */ + } + + return 0; +} + /* * blkif_queue_request * @@ -324,6 +359,9 @@ static int xlvbd_init_blk_queue(struct gendisk *gd, u16 sector_size) /* Make sure buffer addresses are sector-aligned. */ blk_queue_dma_alignment(rq, 511); + /* Make sure we don't use bounce buffers. */ + blk_queue_bounce_limit(rq, BLK_BOUNCE_ANY); + gd->queue = rq; return 0; @@ -546,7 +584,7 @@ static int setup_blkring(struct xenbus_device *dev, info->ring_ref = GRANT_INVALID_REF; - sring = (struct blkif_sring *)__get_free_page(GFP_KERNEL); + sring = (struct blkif_sring *)__get_free_page(GFP_NOIO | __GFP_HIGH); if (!sring) { xenbus_dev_fatal(dev, -ENOMEM, "allocating shared ring"); return -ENOMEM; @@ -703,7 +741,8 @@ static int blkif_recover(struct blkfront_info *info) int j; /* Stage 1: Make a safe copy of the shadow state. */ - copy = kmalloc(sizeof(info->shadow), GFP_KERNEL); + copy = kmalloc(sizeof(info->shadow), + GFP_NOIO | __GFP_REPEAT | __GFP_HIGH); if (!copy) return -ENOMEM; memcpy(copy, info->shadow, sizeof(info->shadow)); @@ -959,7 +998,7 @@ static int blkif_release(struct inode *inode, struct file *filep) struct xenbus_device *dev = info->xbdev; enum xenbus_state state = xenbus_read_driver_state(dev->otherend); - if (state == XenbusStateClosing) + if (state == XenbusStateClosing && info->is_ready) blkfront_closing(dev); } return 0; @@ -971,6 +1010,7 @@ static struct block_device_operations xlvbd_block_fops = .open = blkif_open, .release = blkif_release, .getgeo = blkif_getgeo, + .ioctl = blkif_ioctl, }; @@ -1006,7 +1046,7 @@ static int __init xlblk_init(void) module_init(xlblk_init); -static void xlblk_exit(void) +static void __exit xlblk_exit(void) { return xenbus_unregister_driver(&blkfront); } diff --git a/drivers/block/z2ram.c b/drivers/block/z2ram.c index 2d5853cbd4b..be20a67f1fa 100644 --- a/drivers/block/z2ram.c +++ b/drivers/block/z2ram.c @@ -332,7 +332,7 @@ z2_init(void) int ret; if (!MACH_IS_AMIGA) - return -ENXIO; + return -ENODEV; ret = -EBUSY; if (register_blkdev(Z2RAM_MAJOR, DEVICE_NAME)) |