diff options
Diffstat (limited to 'drivers/ide')
| -rw-r--r-- | drivers/ide/pci/hpt366.c | 371 |
1 files changed, 181 insertions, 190 deletions
diff --git a/drivers/ide/pci/hpt366.c b/drivers/ide/pci/hpt366.c index 577aef94d7b..fd15329d953 100644 --- a/drivers/ide/pci/hpt366.c +++ b/drivers/ide/pci/hpt366.c @@ -1,5 +1,5 @@ /* - * linux/drivers/ide/pci/hpt366.c Version 0.45 May 27, 2006 + * linux/drivers/ide/pci/hpt366.c Version 0.50 May 28, 2006 * * Copyright (C) 1999-2003 Andre Hedrick <andre@linux-ide.org> * Portions Copyright (C) 2001 Sun Microsystems, Inc. @@ -80,6 +80,11 @@ * - claim the extra 240 bytes of I/O space for all chips * - optimize the rate masking/filtering and the drive list lookup code * - use pci_get_slot() to get to the function 1 of HPT36x/374 + * - cache the channel's MCRs' offset; only touch the relevant MCR when detecting + * the cable type on HPT374's function 1 + * - rename all the register related variables consistently + * - make HPT36x's speedproc handler look the same way as HPT37x ones; fix the + * PIO timing register mask for HPT37x * <source@mvista.com> * */ @@ -497,109 +502,106 @@ static u32 pci_bus_clock_list(u8 speed, u32 *chipset_table) static int hpt36x_tune_chipset(ide_drive_t *drive, u8 xferspeed) { - ide_hwif_t *hwif = drive->hwif; - struct pci_dev *dev = hwif->pci_dev; - struct hpt_info *info = ide_get_hwifdata(hwif); - u8 speed = hpt3xx_ratefilter(drive, xferspeed); - u8 regtime = (drive->select.b.unit & 0x01) ? 0x44 : 0x40; - u8 regfast = (hwif->channel) ? 0x55 : 0x51; - u8 drive_fast = 0; - u32 reg1 = 0, reg2 = 0; + ide_hwif_t *hwif = HWIF(drive); + struct pci_dev *dev = hwif->pci_dev; + struct hpt_info *info = ide_get_hwifdata (hwif); + u8 speed = hpt3xx_ratefilter(drive, xferspeed); + u8 itr_addr = drive->dn ? 0x44 : 0x40; + u8 mcr_addr = hwif->select_data + 1; + u8 mcr = 0; + u32 new_itr, old_itr = 0; + u32 itr_mask = (speed < XFER_MW_DMA_0) ? 0x30070000 : 0xc0000000; /* * Disable the "fast interrupt" prediction. */ - pci_read_config_byte(dev, regfast, &drive_fast); - if (drive_fast & 0x80) - pci_write_config_byte(dev, regfast, drive_fast & ~0x80); + pci_read_config_byte(dev, mcr_addr, &mcr); + if (mcr & 0x80) + pci_write_config_byte(dev, mcr_addr, mcr & ~0x80); - reg2 = pci_bus_clock_list(speed, info->speed); + new_itr = pci_bus_clock_list(speed, info->speed); /* - * Disable on-chip PIO FIFO/buffer - * (to avoid problems handling I/O errors later) + * Disable on-chip PIO FIFO/buffer (and PIO MST mode as well) + * to avoid problems handling I/O errors later */ - pci_read_config_dword(dev, regtime, ®1); - if (speed >= XFER_MW_DMA_0) { - reg2 = (reg2 & ~0xc0000000) | (reg1 & 0xc0000000); - } else { - reg2 = (reg2 & ~0x30070000) | (reg1 & 0x30070000); - } - reg2 &= ~0x80000000; + pci_read_config_dword(dev, itr_addr, &old_itr); + new_itr = (new_itr & ~itr_mask) | (old_itr & itr_mask); + new_itr &= ~0xc0000000; - pci_write_config_dword(dev, regtime, reg2); + pci_write_config_dword(dev, itr_addr, new_itr); return ide_config_drive_speed(drive, speed); } static int hpt370_tune_chipset(ide_drive_t *drive, u8 xferspeed) { - ide_hwif_t *hwif = drive->hwif; - struct pci_dev *dev = hwif->pci_dev; - struct hpt_info *info = ide_get_hwifdata(hwif); - u8 speed = hpt3xx_ratefilter(drive, xferspeed); - u8 regfast = (drive->hwif->channel) ? 0x55 : 0x51; - u8 drive_pci = 0x40 + (drive->dn * 4); - u8 new_fast = 0, drive_fast = 0; - u32 list_conf = 0, drive_conf = 0; - u32 conf_mask = (speed >= XFER_MW_DMA_0) ? 0xc0000000 : 0x30070000; + ide_hwif_t *hwif = HWIF(drive); + struct pci_dev *dev = hwif->pci_dev; + struct hpt_info *info = ide_get_hwifdata (hwif); + u8 speed = hpt3xx_ratefilter(drive, xferspeed); + u8 mcr_addr = hwif->select_data + 1; + u8 itr_addr = 0x40 + (drive->dn * 4); + u8 new_mcr = 0, old_mcr = 0; + u32 new_itr, old_itr = 0; + u32 itr_mask = (speed < XFER_MW_DMA_0) ? 0x303c0000 : 0xc0000000; /* * Disable the "fast interrupt" prediction. * don't holdoff on interrupts. (== 0x01 despite what the docs say) */ - pci_read_config_byte(dev, regfast, &drive_fast); - new_fast = drive_fast; - if (new_fast & 0x02) - new_fast &= ~0x02; + pci_read_config_byte(dev, mcr_addr, &old_mcr); + new_mcr = old_mcr; + if (new_mcr & 0x02) + new_mcr &= ~0x02; #ifdef HPT_DELAY_INTERRUPT - if (new_fast & 0x01) - new_fast &= ~0x01; + if (new_mcr & 0x01) + new_mcr &= ~0x01; #else - if ((new_fast & 0x01) == 0) - new_fast |= 0x01; + if ((new_mcr & 0x01) == 0) + new_mcr |= 0x01; #endif - if (new_fast != drive_fast) - pci_write_config_byte(dev, regfast, new_fast); + if (new_mcr != old_mcr) + pci_write_config_byte(dev, mcr_addr, new_mcr); - list_conf = pci_bus_clock_list(speed, info->speed); + new_itr = pci_bus_clock_list(speed, info->speed); - pci_read_config_dword(dev, drive_pci, &drive_conf); - list_conf = (list_conf & ~conf_mask) | (drive_conf & conf_mask); + pci_read_config_dword(dev, itr_addr, &old_itr); + new_itr = (new_itr & ~itr_mask) | (old_itr & itr_mask); if (speed < XFER_MW_DMA_0) - list_conf &= ~0x80000000; /* Disable on-chip PIO FIFO/buffer */ - pci_write_config_dword(dev, drive_pci, list_conf); + new_itr &= ~0x80000000; /* Disable on-chip PIO FIFO/buffer */ + pci_write_config_dword(dev, itr_addr, new_itr); return ide_config_drive_speed(drive, speed); } static int hpt372_tune_chipset(ide_drive_t *drive, u8 xferspeed) { - ide_hwif_t *hwif = drive->hwif; - struct pci_dev *dev = hwif->pci_dev; - struct hpt_info *info = ide_get_hwifdata(hwif); - u8 speed = hpt3xx_ratefilter(drive, xferspeed); - u8 regfast = (drive->hwif->channel) ? 0x55 : 0x51; - u8 drive_fast = 0, drive_pci = 0x40 + (drive->dn * 4); - u32 list_conf = 0, drive_conf = 0; - u32 conf_mask = (speed >= XFER_MW_DMA_0) ? 0xc0000000 : 0x30070000; + ide_hwif_t *hwif = HWIF(drive); + struct pci_dev *dev = hwif->pci_dev; + struct hpt_info *info = ide_get_hwifdata (hwif); + u8 speed = hpt3xx_ratefilter(drive, xferspeed); + u8 mcr_addr = hwif->select_data + 1; + u8 itr_addr = 0x40 + (drive->dn * 4); + u8 mcr = 0; + u32 new_itr, old_itr = 0; + u32 itr_mask = (speed < XFER_MW_DMA_0) ? 0x303c0000 : 0xc0000000; /* * Disable the "fast interrupt" prediction. * don't holdoff on interrupts. (== 0x01 despite what the docs say) */ - pci_read_config_byte(dev, regfast, &drive_fast); - drive_fast &= ~0x07; - pci_write_config_byte(dev, regfast, drive_fast); + pci_read_config_byte (dev, mcr_addr, &mcr); + pci_write_config_byte(dev, mcr_addr, (mcr & ~0x07)); - list_conf = pci_bus_clock_list(speed, info->speed); - pci_read_config_dword(dev, drive_pci, &drive_conf); - list_conf = (list_conf & ~conf_mask) | (drive_conf & conf_mask); + new_itr = pci_bus_clock_list(speed, info->speed); + pci_read_config_dword(dev, itr_addr, &old_itr); + new_itr = (new_itr & ~itr_mask) | (old_itr & itr_mask); if (speed < XFER_MW_DMA_0) - list_conf &= ~0x80000000; /* Disable on-chip PIO FIFO/buffer */ - pci_write_config_dword(dev, drive_pci, list_conf); + new_itr &= ~0x80000000; /* Disable on-chip PIO FIFO/buffer */ + pci_write_config_dword(dev, itr_addr, new_itr); return ide_config_drive_speed(drive, speed); } @@ -666,39 +668,41 @@ static int hpt3xx_quirkproc(ide_drive_t *drive) static void hpt3xx_intrproc (ide_drive_t *drive) { - ide_hwif_t *hwif = drive->hwif; + ide_hwif_t *hwif = HWIF(drive); if (drive->quirk_list) return; /* drives in the quirk_list may not like intr setups/cleanups */ - hwif->OUTB(drive->ctl|2, IDE_CONTROL_REG); + hwif->OUTB(drive->ctl | 2, IDE_CONTROL_REG); } static void hpt3xx_maskproc (ide_drive_t *drive, int mask) { - ide_hwif_t *hwif = drive->hwif; - struct hpt_info *info = ide_get_hwifdata(hwif); - struct pci_dev *dev = hwif->pci_dev; + ide_hwif_t *hwif = HWIF(drive); + struct pci_dev *dev = hwif->pci_dev; + struct hpt_info *info = ide_get_hwifdata(hwif); if (drive->quirk_list) { if (info->revision >= 3) { - u8 reg5a = 0; - pci_read_config_byte(dev, 0x5a, ®5a); - if (((reg5a & 0x10) >> 4) != mask) - pci_write_config_byte(dev, 0x5a, mask ? (reg5a | 0x10) : (reg5a & ~0x10)); + u8 scr1 = 0; + + pci_read_config_byte(dev, 0x5a, &scr1); + if (((scr1 & 0x10) >> 4) != mask) { + if (mask) + scr1 |= 0x10; + else + scr1 &= ~0x10; + pci_write_config_byte(dev, 0x5a, scr1); + } } else { - if (mask) { + if (mask) disable_irq(hwif->irq); - } else { - enable_irq(hwif->irq); - } + else + enable_irq (hwif->irq); } - } else { - if (IDE_CONTROL_REG) - hwif->OUTB(mask ? (drive->ctl | 2) : - (drive->ctl & ~2), - IDE_CONTROL_REG); - } + } else + hwif->OUTB(mask ? (drive->ctl | 2) : (drive->ctl & ~2), + IDE_CONTROL_REG); } static int hpt366_config_drive_xfer_rate (ide_drive_t *drive) @@ -727,28 +731,29 @@ fast_ata_pio: } /* - * This is specific to the HPT366 UDMA bios chipset + * This is specific to the HPT366 UDMA chipset * by HighPoint|Triones Technologies, Inc. */ -static int hpt366_ide_dma_lostirq (ide_drive_t *drive) +static int hpt366_ide_dma_lostirq(ide_drive_t *drive) { - struct pci_dev *dev = HWIF(drive)->pci_dev; - u8 reg50h = 0, reg52h = 0, reg5ah = 0; - - pci_read_config_byte(dev, 0x50, ®50h); - pci_read_config_byte(dev, 0x52, ®52h); - pci_read_config_byte(dev, 0x5a, ®5ah); - printk("%s: (%s) reg50h=0x%02x, reg52h=0x%02x, reg5ah=0x%02x\n", - drive->name, __FUNCTION__, reg50h, reg52h, reg5ah); - if (reg5ah & 0x10) - pci_write_config_byte(dev, 0x5a, reg5ah & ~0x10); + struct pci_dev *dev = HWIF(drive)->pci_dev; + u8 mcr1 = 0, mcr3 = 0, scr1 = 0; + + pci_read_config_byte(dev, 0x50, &mcr1); + pci_read_config_byte(dev, 0x52, &mcr3); + pci_read_config_byte(dev, 0x5a, &scr1); + printk("%s: (%s) mcr1=0x%02x, mcr3=0x%02x, scr1=0x%02x\n", + drive->name, __FUNCTION__, mcr1, mcr3, scr1); + if (scr1 & 0x10) + pci_write_config_byte(dev, 0x5a, scr1 & ~0x10); return __ide_dma_lostirq(drive); } static void hpt370_clear_engine (ide_drive_t *drive) { - u8 regstate = HWIF(drive)->channel ? 0x54 : 0x50; - pci_write_config_byte(HWIF(drive)->pci_dev, regstate, 0x37); + ide_hwif_t *hwif = HWIF(drive); + + pci_write_config_byte(hwif->pci_dev, hwif->select_data, 0x37); udelay(10); } @@ -780,10 +785,10 @@ static int hpt370_ide_dma_end (ide_drive_t *drive) static void hpt370_lostirq_timeout (ide_drive_t *drive) { ide_hwif_t *hwif = HWIF(drive); - u8 bfifo = 0, reginfo = hwif->channel ? 0x56 : 0x52; + u8 bfifo = 0; u8 dma_stat = 0, dma_cmd = 0; - pci_read_config_byte(HWIF(drive)->pci_dev, reginfo, &bfifo); + pci_read_config_byte(HWIF(drive)->pci_dev, hwif->select_data + 2, &bfifo); printk(KERN_DEBUG "%s: %d bytes in FIFO\n", drive->name, bfifo); hpt370_clear_engine(drive); /* get dma command mode */ @@ -814,10 +819,9 @@ static int hpt374_ide_dma_test_irq(ide_drive_t *drive) { ide_hwif_t *hwif = HWIF(drive); u16 bfifo = 0; - u8 reginfo = hwif->channel ? 0x56 : 0x52; - u8 dma_stat; + u8 dma_stat; - pci_read_config_word(hwif->pci_dev, reginfo, &bfifo); + pci_read_config_word(hwif->pci_dev, hwif->select_data + 2, &bfifo); if (bfifo & 0x1FF) { // printk("%s: %d bytes in FIFO\n", drive->name, bfifo); return 0; @@ -825,7 +829,7 @@ static int hpt374_ide_dma_test_irq(ide_drive_t *drive) dma_stat = hwif->INB(hwif->dma_status); /* return 1 if INTR asserted */ - if ((dma_stat & 4) == 4) + if (dma_stat & 4) return 1; if (!drive->waiting_for_dma) @@ -834,17 +838,17 @@ static int hpt374_ide_dma_test_irq(ide_drive_t *drive) return 0; } -static int hpt374_ide_dma_end (ide_drive_t *drive) +static int hpt374_ide_dma_end(ide_drive_t *drive) { - struct pci_dev *dev = HWIF(drive)->pci_dev; ide_hwif_t *hwif = HWIF(drive); - u8 msc_stat = 0, mscreg = hwif->channel ? 0x54 : 0x50; - u8 bwsr_stat = 0, bwsr_mask = hwif->channel ? 0x02 : 0x01; - - pci_read_config_byte(dev, 0x6a, &bwsr_stat); - pci_read_config_byte(dev, mscreg, &msc_stat); - if ((bwsr_stat & bwsr_mask) == bwsr_mask) - pci_write_config_byte(dev, mscreg, msc_stat|0x30); + struct pci_dev *dev = hwif->pci_dev; + u8 mcr = 0, mcr_addr = hwif->select_data; + u8 bwsr = 0, mask = hwif->channel ? 0x02 : 0x01; + + pci_read_config_byte(dev, 0x6a, &bwsr); + pci_read_config_byte(dev, mcr_addr, &mcr); + if (bwsr & mask) + pci_write_config_byte(dev, mcr_addr, mcr | 0x30); return __ide_dma_end(drive); } @@ -910,6 +914,7 @@ static void hpt3xxn_rw_disk(ide_drive_t *drive, struct request *rq) /* * Set/get power state for a drive. + * NOTE: affects both drives on each channel. * * When we turn the power back on, we need to re-initialize things. */ @@ -917,26 +922,18 @@ static void hpt3xxn_rw_disk(ide_drive_t *drive, struct request *rq) static int hpt3xx_busproc(ide_drive_t *drive, int state) { - ide_hwif_t *hwif = drive->hwif; + ide_hwif_t *hwif = HWIF(drive); struct pci_dev *dev = hwif->pci_dev; - u8 tristate, resetmask, bus_reg = 0; - u16 tri_reg = 0; + u8 mcr_addr = hwif->select_data + 2; + u8 resetmask = hwif->channel ? 0x80 : 0x40; + u8 bsr2 = 0; + u16 mcr = 0; hwif->bus_state = state; - if (hwif->channel) { - /* secondary channel */ - tristate = 0x56; - resetmask = 0x80; - } else { - /* primary channel */ - tristate = 0x52; - resetmask = 0x40; - } - /* Grab the status. */ - pci_read_config_word(dev, tristate, &tri_reg); - pci_read_config_byte(dev, 0x59, &bus_reg); + pci_read_config_word(dev, mcr_addr, &mcr); + pci_read_config_byte(dev, 0x59, &bsr2); /* * Set the state. We don't set it if we don't need to do so. @@ -944,22 +941,22 @@ static int hpt3xx_busproc(ide_drive_t *drive, int state) */ switch (state) { case BUSSTATE_ON: - if (!(bus_reg & resetmask)) + if (!(bsr2 & resetmask)) return 0; hwif->drives[0].failures = hwif->drives[1].failures = 0; - pci_write_config_byte(dev, 0x59, bus_reg & ~resetmask); - pci_write_config_word(dev, tristate, tri_reg & ~TRISTATE_BIT); + pci_write_config_byte(dev, 0x59, bsr2 & ~resetmask); + pci_write_config_word(dev, mcr_addr, mcr & ~TRISTATE_BIT); return 0; case BUSSTATE_OFF: - if ((bus_reg & resetmask) && !(tri_reg & TRISTATE_BIT)) + if ((bsr2 & resetmask) && !(mcr & TRISTATE_BIT)) return 0; - tri_reg &= ~TRISTATE_BIT; + mcr &= ~TRISTATE_BIT; break; case BUSSTATE_TRISTATE: - if ((bus_reg & resetmask) && (tri_reg & TRISTATE_BIT)) + if ((bsr2 & resetmask) && (mcr & TRISTATE_BIT)) return 0; - tri_reg |= TRISTATE_BIT; + mcr |= TRISTATE_BIT; break; default: return -EINVAL; @@ -968,20 +965,20 @@ static int hpt3xx_busproc(ide_drive_t *drive, int state) hwif->drives[0].failures = hwif->drives[0].max_failures + 1; hwif->drives[1].failures = hwif->drives[1].max_failures + 1; - pci_write_config_word(dev, tristate, tri_reg); - pci_write_config_byte(dev, 0x59, bus_reg | resetmask); + pci_write_config_word(dev, mcr_addr, mcr); + pci_write_config_byte(dev, 0x59, bsr2 | resetmask); return 0; } static void __devinit hpt366_clocking(ide_hwif_t *hwif) { - u32 reg1 = 0; + u32 itr1 = 0; struct hpt_info *info = ide_get_hwifdata(hwif); - pci_read_config_dword(hwif->pci_dev, 0x40, ®1); + pci_read_config_dword(hwif->pci_dev, 0x40, &itr1); /* detect bus speed by looking at control reg timing: */ - switch((reg1 >> 8) & 7) { + switch((itr1 >> 8) & 7) { case 5: info->speed = forty_base_hpt36x; break; @@ -1003,7 +1000,7 @@ static void __devinit hpt37x_clocking(ide_hwif_t *hwif) int adjust, i; u16 freq = 0; u32 pll, temp = 0; - u8 reg5bh = 0, mcr1 = 0; + u8 scr2 = 0, mcr1 = 0; /* * default to pci clock. make sure MA15/16 are set to output @@ -1116,13 +1113,13 @@ static void __devinit hpt37x_clocking(ide_hwif_t *hwif) /* wait for clock stabilization */ for (i = 0; i < 0x50000; i++) { - pci_read_config_byte(dev, 0x5b, ®5bh); - if (reg5bh & 0x80) { + pci_read_config_byte(dev, 0x5b, &scr2); + if (scr2 & 0x80) { /* spin looking for the clock to destabilize */ for (i = 0; i < 0x1000; ++i) { pci_read_config_byte(dev, 0x5b, - ®5bh); - if ((reg5bh & 0x80) == 0) + &scr2); + if ((scr2 & 0x80) == 0) goto pll_recal; } pci_read_config_dword(dev, 0x5c, &pll); @@ -1159,26 +1156,24 @@ init_hpt37X_done: static int __devinit init_hpt37x(struct pci_dev *dev) { - u8 reg5ah; + u8 scr1; - pci_read_config_byte(dev, 0x5a, ®5ah); + pci_read_config_byte (dev, 0x5a, &scr1); /* interrupt force enable */ - pci_write_config_byte(dev, 0x5a, (reg5ah & ~0x10)); + pci_write_config_byte(dev, 0x5a, (scr1 & ~0x10)); return 0; } static int __devinit init_hpt366(struct pci_dev *dev) { - u32 reg1 = 0; - u8 drive_fast = 0; + u8 mcr = 0; /* * Disable the "fast interrupt" prediction. */ - pci_read_config_byte(dev, 0x51, &drive_fast); - if (drive_fast & 0x80) - pci_write_config_byte(dev, 0x51, drive_fast & ~0x80); - pci_read_config_dword(dev, 0x40, ®1); + pci_read_config_byte(dev, 0x51, &mcr); + if (mcr & 0x80) + pci_write_config_byte(dev, 0x51, mcr & ~0x80); return 0; } @@ -1213,17 +1208,21 @@ static unsigned int __devinit init_chipset_hpt366(struct pci_dev *dev, const cha static void __devinit init_hwif_hpt366(ide_hwif_t *hwif) { - struct pci_dev *dev = hwif->pci_dev; + struct pci_dev *dev = hwif->pci_dev; struct hpt_info *info = ide_get_hwifdata(hwif); - u8 ata66 = 0, regmask = (hwif->channel) ? 0x01 : 0x02; int serialize = HPT_SERIALIZE_IO; - + u8 scr1 = 0, ata66 = (hwif->channel) ? 0x01 : 0x02; + + /* Cache the channel's MISC. control registers' offset */ + hwif->select_data = hwif->channel ? 0x54 : 0x50; + hwif->tuneproc = &hpt3xx_tune_drive; hwif->speedproc = &hpt3xx_tune_chipset; hwif->quirkproc = &hpt3xx_quirkproc; hwif->intrproc = &hpt3xx_intrproc; hwif->maskproc = &hpt3xx_maskproc; - + hwif->busproc = &hpt3xx_busproc; + /* * HPT3xxN chips have some complications: * @@ -1241,7 +1240,7 @@ static void __devinit init_hwif_hpt366(ide_hwif_t *hwif) /* * The HPT37x uses the CBLID pins as outputs for MA15/MA16 - * address lines to access an external eeprom. To read valid + * address lines to access an external EEPROM. To read valid * cable detect state the pins must be enabled as inputs. */ if (info->revision >= 8 && (PCI_FUNC(dev->devfn) & 1)) { @@ -1250,35 +1249,28 @@ static void __devinit init_hwif_hpt366(ide_hwif_t *hwif) * - set bit 15 of reg 0x52 to enable TCBLID as input * - set bit 15 of reg 0x56 to enable FCBLID as input */ - u16 mcr3, mcr6; - pci_read_config_word(dev, 0x52, &mcr3); - pci_read_config_word(dev, 0x56, &mcr6); - pci_write_config_word(dev, 0x52, mcr3 | 0x8000); - pci_write_config_word(dev, 0x56, mcr6 | 0x8000); + u8 mcr_addr = hwif->select_data + 2; + u16 mcr; + + pci_read_config_word (dev, mcr_addr, &mcr); + pci_write_config_word(dev, mcr_addr, (mcr | 0x8000)); /* now read cable id register */ - pci_read_config_byte(dev, 0x5a, &ata66); - pci_write_config_word(dev, 0x52, mcr3); - pci_write_config_word(dev, 0x56, mcr6); + pci_read_config_byte (dev, 0x5a, &scr1); + pci_write_config_word(dev, mcr_addr, mcr); } else if (info->revision >= 3) { /* * HPT370/372 and 374 pcifn 0 - * - clear bit 0 of 0x5b to enable P/SCBLID as inputs + * - clear bit 0 of reg 0x5b to enable P/SCBLID as inputs */ - u8 scr2; - pci_read_config_byte(dev, 0x5b, &scr2); - pci_write_config_byte(dev, 0x5b, scr2 & ~1); - /* now read cable id register */ - pci_read_config_byte(dev, 0x5a, &ata66); - pci_write_config_byte(dev, 0x5b, scr2); - } else { - pci_read_config_byte(dev, 0x5a, &ata66); - } + u8 scr2 = 0; -#ifdef DEBUG - printk("HPT366: reg5ah=0x%02x ATA-%s Cable Port%d\n", - ata66, (ata66 & regmask) ? "33" : "66", - PCI_FUNC(hwif->pci_dev->devfn)); -#endif /* DEBUG */ + pci_read_config_byte (dev, 0x5b, &scr2); + pci_write_config_byte(dev, 0x5b, (scr2 & ~1)); + /* now read cable id register */ + pci_read_config_byte (dev, 0x5a, &scr1); + pci_write_config_byte(dev, 0x5b, scr2); + } else + pci_read_config_byte (dev, 0x5a, &scr1); /* Serialize access to this device */ if (serialize && hwif->mate) @@ -1300,7 +1292,7 @@ static void __devinit init_hwif_hpt366(ide_hwif_t *hwif) hwif->mwdma_mask = 0x07; if (!(hwif->udma_four)) - hwif->udma_four = ((ata66 & regmask) ? 0 : 1); + hwif->udma_four = ((scr1 & ata66) ? 0 : 1); hwif->ide_dma_check = &hpt366_config_drive_xfer_rate; if (info->revision >= 8) { @@ -1327,11 +1319,10 @@ static void __devinit init_hwif_hpt366(ide_hwif_t *hwif) static void __devinit init_dma_hpt366(ide_hwif_t *hwif, unsigned long dmabase) { - struct hpt_info *info = ide_get_hwifdata(hwif); - u8 masterdma = 0, slavedma = 0; - u8 dma_new = 0, dma_old = 0; - u8 primary = hwif->channel ? 0x4b : 0x43; - u8 secondary = hwif->channel ? 0x4f : 0x47; + struct pci_dev *dev = hwif->pci_dev; + struct hpt_info *info = ide_get_hwifdata(hwif); + u8 masterdma = 0, slavedma = 0; + u8 dma_new = 0, dma_old = 0; unsigned long flags; if (!dmabase) @@ -1348,13 +1339,13 @@ static void __devinit init_dma_hpt366(ide_hwif_t *hwif, unsigned long dmabase) local_irq_save(flags); dma_new = dma_old; - pci_read_config_byte(hwif->pci_dev, primary, &masterdma); - pci_read_config_byte(hwif->pci_dev, secondary, &slavedma); + pci_read_config_byte(dev, hwif->channel ? 0x4b : 0x43, &masterdma); + pci_read_config_byte(dev, hwif->channel ? 0x4f : 0x47, &slavedma); if (masterdma & 0x30) dma_new |= 0x20; - if (slavedma & 0x30) dma_new |= 0x40; + if ( slavedma & 0x30) dma_new |= 0x40; if (dma_new != dma_old) - hwif->OUTB(dma_new, dmabase+2); + hwif->OUTB(dma_new, dmabase + 2); local_irq_restore(flags); |