diff options
Diffstat (limited to 'drivers/media/dvb/pluto2/pluto2.c')
| -rw-r--r-- | drivers/media/dvb/pluto2/pluto2.c | 809 |
1 files changed, 809 insertions, 0 deletions
diff --git a/drivers/media/dvb/pluto2/pluto2.c b/drivers/media/dvb/pluto2/pluto2.c new file mode 100644 index 00000000000..706e0bcb5ed --- /dev/null +++ b/drivers/media/dvb/pluto2/pluto2.c @@ -0,0 +1,809 @@ +/* + * pluto2.c - Satelco Easywatch Mobile Terrestrial Receiver [DVB-T] + * + * Copyright (C) 2005 Andreas Oberritter <obi@linuxtv.org> + * + * based on pluto2.c 1.10 - http://instinct-wp8.no-ip.org/pluto/ + * by Dany Salman <salmandany@yahoo.fr> + * Copyright (c) 2004 TDF + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + */ + +#include <linux/i2c.h> +#include <linux/i2c-algo-bit.h> +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/pci.h> +#include <linux/dma-mapping.h> + +#include "demux.h" +#include "dmxdev.h" +#include "dvb_demux.h" +#include "dvb_frontend.h" +#include "dvb_net.h" +#include "dvbdev.h" +#include "tda1004x.h" + +#define DRIVER_NAME "pluto2" + +#define REG_PIDn(n) ((n) << 2) /* PID n pattern registers */ +#define REG_PCAR 0x0020 /* PC address register */ +#define REG_TSCR 0x0024 /* TS ctrl & status */ +#define REG_MISC 0x0028 /* miscellaneous */ +#define REG_MMAC 0x002c /* MSB MAC address */ +#define REG_IMAC 0x0030 /* ISB MAC address */ +#define REG_LMAC 0x0034 /* LSB MAC address */ +#define REG_SPID 0x0038 /* SPI data */ +#define REG_SLCS 0x003c /* serial links ctrl/status */ + +#define PID0_NOFIL (0x0001 << 16) +#define PIDn_ENP (0x0001 << 15) +#define PID0_END (0x0001 << 14) +#define PID0_AFIL (0x0001 << 13) +#define PIDn_PID (0x1fff << 0) + +#define TSCR_NBPACKETS (0x00ff << 24) +#define TSCR_DEM (0x0001 << 17) +#define TSCR_DE (0x0001 << 16) +#define TSCR_RSTN (0x0001 << 15) +#define TSCR_MSKO (0x0001 << 14) +#define TSCR_MSKA (0x0001 << 13) +#define TSCR_MSKL (0x0001 << 12) +#define TSCR_OVR (0x0001 << 11) +#define TSCR_AFUL (0x0001 << 10) +#define TSCR_LOCK (0x0001 << 9) +#define TSCR_IACK (0x0001 << 8) +#define TSCR_ADEF (0x007f << 0) + +#define MISC_DVR (0x0fff << 4) +#define MISC_ALED (0x0001 << 3) +#define MISC_FRST (0x0001 << 2) +#define MISC_LED1 (0x0001 << 1) +#define MISC_LED0 (0x0001 << 0) + +#define SPID_SPIDR (0x00ff << 0) + +#define SLCS_SCL (0x0001 << 7) +#define SLCS_SDA (0x0001 << 6) +#define SLCS_CSN (0x0001 << 2) +#define SLCS_OVR (0x0001 << 1) +#define SLCS_SWC (0x0001 << 0) + +#define TS_DMA_PACKETS (8) +#define TS_DMA_BYTES (188 * TS_DMA_PACKETS) + +#define I2C_ADDR_TDA10046 0x10 +#define I2C_ADDR_TUA6034 0xc2 +#define NHWFILTERS 8 + +struct pluto { + /* pci */ + struct pci_dev *pdev; + u8 __iomem *io_mem; + + /* dvb */ + struct dmx_frontend hw_frontend; + struct dmx_frontend mem_frontend; + struct dmxdev dmxdev; + struct dvb_adapter dvb_adapter; + struct dvb_demux demux; + struct dvb_frontend *fe; + struct dvb_net dvbnet; + unsigned int full_ts_users; + unsigned int users; + + /* i2c */ + struct i2c_algo_bit_data i2c_bit; + struct i2c_adapter i2c_adap; + unsigned int i2cbug; + + /* irq */ + unsigned int overflow; + + /* dma */ + dma_addr_t dma_addr; + u8 dma_buf[TS_DMA_BYTES]; + u8 dummy[4096]; +}; + +static inline struct pluto *feed_to_pluto(struct dvb_demux_feed *feed) +{ + return container_of(feed->demux, struct pluto, demux); +} + +static inline struct pluto *frontend_to_pluto(struct dvb_frontend *fe) +{ + return container_of(fe->dvb, struct pluto, dvb_adapter); +} + +static inline u32 pluto_readreg(struct pluto *pluto, u32 reg) +{ + return readl(&pluto->io_mem[reg]); +} + +static inline void pluto_writereg(struct pluto *pluto, u32 reg, u32 val) +{ + writel(val, &pluto->io_mem[reg]); +} + +static inline void pluto_rw(struct pluto *pluto, u32 reg, u32 mask, u32 bits) +{ + u32 val = readl(&pluto->io_mem[reg]); + val &= ~mask; + val |= bits; + writel(val, &pluto->io_mem[reg]); +} + +static void pluto_setsda(void *data, int state) +{ + struct pluto *pluto = data; + + if (state) + pluto_rw(pluto, REG_SLCS, SLCS_SDA, SLCS_SDA); + else + pluto_rw(pluto, REG_SLCS, SLCS_SDA, 0); +} + +static void pluto_setscl(void *data, int state) +{ + struct pluto *pluto = data; + + if (state) + pluto_rw(pluto, REG_SLCS, SLCS_SCL, SLCS_SCL); + else + pluto_rw(pluto, REG_SLCS, SLCS_SCL, 0); + + /* try to detect i2c_inb() to workaround hardware bug: + * reset SDA to high after SCL has been set to low */ + if ((state) && (pluto->i2cbug == 0)) { + pluto->i2cbug = 1; + } else { + if ((!state) && (pluto->i2cbug == 1)) + pluto_setsda(pluto, 1); + pluto->i2cbug = 0; + } +} + +static int pluto_getsda(void *data) +{ + struct pluto *pluto = data; + + return pluto_readreg(pluto, REG_SLCS) & SLCS_SDA; +} + +static int pluto_getscl(void *data) +{ + struct pluto *pluto = data; + + return pluto_readreg(pluto, REG_SLCS) & SLCS_SCL; +} + +static void pluto_reset_frontend(struct pluto *pluto, int reenable) +{ + u32 val = pluto_readreg(pluto, REG_MISC); + + if (val & MISC_FRST) { + val &= ~MISC_FRST; + pluto_writereg(pluto, REG_MISC, val); + } + if (reenable) { + val |= MISC_FRST; + pluto_writereg(pluto, REG_MISC, val); + } +} + +static void pluto_reset_ts(struct pluto *pluto, int reenable) +{ + u32 val = pluto_readreg(pluto, REG_TSCR); + + if (val & TSCR_RSTN) { + val &= ~TSCR_RSTN; + pluto_writereg(pluto, REG_TSCR, val); + } + if (reenable) { + val |= TSCR_RSTN; + pluto_writereg(pluto, REG_TSCR, val); + } +} + +static void pluto_set_dma_addr(struct pluto *pluto) +{ + pluto_writereg(pluto, REG_PCAR, cpu_to_le32(pluto->dma_addr)); +} + +static int __devinit pluto_dma_map(struct pluto *pluto) +{ + pluto->dma_addr = pci_map_single(pluto->pdev, pluto->dma_buf, + TS_DMA_BYTES, PCI_DMA_FROMDEVICE); + + return pci_dma_mapping_error(pluto->dma_addr); +} + +static void pluto_dma_unmap(struct pluto *pluto) +{ + pci_unmap_single(pluto->pdev, pluto->dma_addr, + TS_DMA_BYTES, PCI_DMA_FROMDEVICE); +} + +static int pluto_start_feed(struct dvb_demux_feed *f) +{ + struct pluto *pluto = feed_to_pluto(f); + + /* enable PID filtering */ + if (pluto->users++ == 0) + pluto_rw(pluto, REG_PIDn(0), PID0_AFIL | PID0_NOFIL, 0); + + if ((f->pid < 0x2000) && (f->index < NHWFILTERS)) + pluto_rw(pluto, REG_PIDn(f->index), PIDn_ENP | PIDn_PID, PIDn_ENP | f->pid); + else if (pluto->full_ts_users++ == 0) + pluto_rw(pluto, REG_PIDn(0), PID0_NOFIL, PID0_NOFIL); + + return 0; +} + +static int pluto_stop_feed(struct dvb_demux_feed *f) +{ + struct pluto *pluto = feed_to_pluto(f); + + /* disable PID filtering */ + if (--pluto->users == 0) + pluto_rw(pluto, REG_PIDn(0), PID0_AFIL, PID0_AFIL); + + if ((f->pid < 0x2000) && (f->index < NHWFILTERS)) + pluto_rw(pluto, REG_PIDn(f->index), PIDn_ENP | PIDn_PID, 0x1fff); + else if (--pluto->full_ts_users == 0) + pluto_rw(pluto, REG_PIDn(0), PID0_NOFIL, 0); + + return 0; +} + +static void pluto_dma_end(struct pluto *pluto, unsigned int nbpackets) +{ + /* synchronize the DMA transfer with the CPU + * first so that we see updated contents. */ + pci_dma_sync_single_for_cpu(pluto->pdev, pluto->dma_addr, + TS_DMA_BYTES, PCI_DMA_FROMDEVICE); + + /* Workaround for broken hardware: + * [1] On startup NBPACKETS seems to contain an uninitialized value, + * but no packets have been transfered. + * [2] Sometimes (actually very often) NBPACKETS stays at zero + * although one packet has been transfered. + */ + if ((nbpackets == 0) || (nbpackets > TS_DMA_PACKETS)) { + unsigned int i = 0, valid; + while (pluto->dma_buf[i] == 0x47) + i += 188; + valid = i / 188; + if (nbpackets != valid) { + dev_err(&pluto->pdev->dev, "nbpackets=%u valid=%u\n", + nbpackets, valid); + nbpackets = valid; + } + } + + dvb_dmx_swfilter_packets(&pluto->demux, pluto->dma_buf, nbpackets); + + /* clear the dma buffer. this is needed to be able to identify + * new valid ts packets above */ + memset(pluto->dma_buf, 0, nbpackets * 188); + + /* reset the dma address */ + pluto_set_dma_addr(pluto); + + /* sync the buffer and give it back to the card */ + pci_dma_sync_single_for_device(pluto->pdev, pluto->dma_addr, + TS_DMA_BYTES, PCI_DMA_FROMDEVICE); +} + +static irqreturn_t pluto_irq(int irq, void *dev_id, struct pt_regs *regs) +{ + struct pluto *pluto = dev_id; + u32 tscr; + + /* check whether an interrupt occured on this device */ + tscr = pluto_readreg(pluto, REG_TSCR); + if (!(tscr & (TSCR_DE | TSCR_OVR))) + return IRQ_NONE; + + if (tscr == 0xffffffff) { + // FIXME: maybe recover somehow + dev_err(&pluto->pdev->dev, "card hung up :(\n"); + return IRQ_HANDLED; + } + + /* dma end interrupt */ + if (tscr & TSCR_DE) { + pluto_dma_end(pluto, (tscr & TSCR_NBPACKETS) >> 24); + /* overflow interrupt */ + if (tscr & TSCR_OVR) + pluto->overflow++; + if (pluto->overflow) { + dev_err(&pluto->pdev->dev, "overflow irq (%d)\n", + pluto->overflow); + pluto_reset_ts(pluto, 1); + pluto->overflow = 0; + } + } else if (tscr & TSCR_OVR) { + pluto->overflow++; + } + + /* ACK the interrupt */ + pluto_writereg(pluto, REG_TSCR, tscr | TSCR_IACK); + + return IRQ_HANDLED; +} + +static void __devinit pluto_enable_irqs(struct pluto *pluto) +{ + u32 val = pluto_readreg(pluto, REG_TSCR); + + /* set the number of packets */ + val &= ~TSCR_ADEF; + val |= TS_DMA_PACKETS / 2; + /* disable AFUL and LOCK interrupts */ + val |= (TSCR_MSKA | TSCR_MSKL); + /* enable DMA and OVERFLOW interrupts */ + val &= ~(TSCR_DEM | TSCR_MSKO); + /* clear pending interrupts */ + val |= TSCR_IACK; + + pluto_writereg(pluto, REG_TSCR, val); +} + +static void pluto_disable_irqs(struct pluto *pluto) +{ + u32 val = pluto_readreg(pluto, REG_TSCR); + + /* disable all interrupts */ + val |= (TSCR_DEM | TSCR_MSKO | TSCR_MSKA | TSCR_MSKL); + /* clear pending interrupts */ + val |= TSCR_IACK; + + pluto_writereg(pluto, REG_TSCR, val); +} + +static int __devinit pluto_hw_init(struct pluto *pluto) +{ + pluto_reset_frontend(pluto, 1); + + /* set automatic LED control by FPGA */ + pluto_rw(pluto, REG_MISC, MISC_ALED, MISC_ALED); + + /* set data endianess */ +#ifdef __LITTLE_ENDIAN + pluto_rw(pluto, REG_PIDn(0), PID0_END, PID0_END); +#else + pluto_rw(pluto, REG_PIDn(0), PID0_END, 0); +#endif + /* map DMA and set address */ + pluto_dma_map(pluto); + pluto_set_dma_addr(pluto); + + /* enable interrupts */ + pluto_enable_irqs(pluto); + + /* reset TS logic */ + pluto_reset_ts(pluto, 1); + + return 0; +} + +static void pluto_hw_exit(struct pluto *pluto) +{ + /* disable interrupts */ + pluto_disable_irqs(pluto); + + pluto_reset_ts(pluto, 0); + + /* LED: disable automatic control, enable yellow, disable green */ + pluto_rw(pluto, REG_MISC, MISC_ALED | MISC_LED1 | MISC_LED0, MISC_LED1); + + /* unmap DMA */ + pluto_dma_unmap(pluto); + + pluto_reset_frontend(pluto, 0); +} + +static inline u32 divide(u32 numerator, u32 denominator) +{ + if (denominator == 0) + return ~0; + + return (numerator + denominator / 2) / denominator; +} + +/* LG Innotek TDTE-E001P (Infineon TUA6034) */ +static int lg_tdtpe001p_pll_set(struct dvb_frontend *fe, + struct dvb_frontend_parameters *p) +{ + struct pluto *pluto = frontend_to_pluto(fe); + struct i2c_msg msg; + int ret; + u8 buf[4]; + u32 div; + + // Fref = 166.667 Hz + // Fref * 3 = 500.000 Hz + // IF = 36166667 + // IF / Fref = 217 + //div = divide(p->frequency + 36166667, 166667); + div = divide(p->frequency * 3, 500000) + 217; + buf[0] = (div >> 8) & 0x7f; + buf[1] = (div >> 0) & 0xff; + + if (p->frequency < 611000000) + buf[2] = 0xb4; + else if (p->frequency < 811000000) + buf[2] = 0xbc; + else + buf[2] = 0xf4; + + // VHF: 174-230 MHz + // center: 350 MHz + // UHF: 470-862 MHz + if (p->frequency < 350000000) + buf[3] = 0x02; + else + buf[3] = 0x04; + + if (p->u.ofdm.bandwidth == BANDWIDTH_8_MHZ) + buf[3] |= 0x08; + + if (sizeof(buf) == 6) { + buf[4] = buf[2]; + buf[4] &= ~0x1c; + buf[4] |= 0x18; + + buf[5] = (0 << 7) | (2 << 4); + } + + msg.addr = I2C_ADDR_TUA6034 >> 1; + msg.flags = 0; + msg.buf = buf; + msg.len = sizeof(buf); + + ret = i2c_transfer(&pluto->i2c_adap, &msg, 1); + if (ret < 0) + return ret; + else if (ret == 0) + return -EREMOTEIO; + + return 0; +} + +static int pluto2_request_firmware(struct dvb_frontend *fe, + const struct firmware **fw, char *name) +{ + struct pluto *pluto = frontend_to_pluto(fe); + + return request_firmware(fw, name, &pluto->pdev->dev); +} + +static struct tda1004x_config pluto2_fe_config __devinitdata = { + .demod_address = I2C_ADDR_TDA10046 >> 1, + .invert = 1, + .invert_oclk = 0, + .xtal_freq = TDA10046_XTAL_16M, + .agc_config = TDA10046_AGC_DEFAULT, + .if_freq = TDA10046_FREQ_3617, + .pll_set = lg_tdtpe001p_pll_set, + .pll_sleep = NULL, + .request_firmware = pluto2_request_firmware, +}; + +static int __devinit frontend_init(struct pluto *pluto) +{ + int ret; + + pluto->fe = tda10046_attach(&pluto2_fe_config, &pluto->i2c_adap); + if (!pluto->fe) { + dev_err(&pluto->pdev->dev, "could not attach frontend\n"); + return -ENODEV; + } + + ret = dvb_register_frontend(&pluto->dvb_adapter, pluto->fe); + if (ret < 0) { + if (pluto->fe->ops->release) + pluto->fe->ops->release(pluto->fe); + return ret; + } + + return 0; +} + +static void __devinit pluto_read_rev(struct pluto *pluto) +{ + u32 val = pluto_readreg(pluto, REG_MISC) & MISC_DVR; + dev_info(&pluto->pdev->dev, "board revision %d.%d\n", + (val >> 12) & 0x0f, (val >> 4) & 0xff); +} + +static void __devinit pluto_read_mac(struct pluto *pluto, u8 *mac) +{ + u32 val = pluto_readreg(pluto, REG_MMAC); + mac[0] = (val >> 8) & 0xff; + mac[1] = (val >> 0) & 0xff; + + val = pluto_readreg(pluto, REG_IMAC); + mac[2] = (val >> 8) & 0xff; + mac[3] = (val >> 0) & 0xff; + + val = pluto_readreg(pluto, REG_LMAC); + mac[4] = (val >> 8) & 0xff; + mac[5] = (val >> 0) & 0xff; + + dev_info(&pluto->pdev->dev, "MAC %02x:%02x:%02x:%02x:%02x:%02x\n", + mac[0], mac[1], mac[2], mac[3], mac[4], mac[5]); +} + +static int __devinit pluto_read_serial(struct pluto *pluto) +{ + struct pci_dev *pdev = pluto->pdev; + unsigned int i, j; + u8 __iomem *cis; + + cis = pci_iomap(pdev, 1, 0); + if (!cis) + return -EIO; + + dev_info(&pdev->dev, "S/N "); + + for (i = 0xe0; i < 0x100; i += 4) { + u32 val = readl(&cis[i]); + for (j = 0; j < 32; j += 8) { + if ((val & 0xff) == 0xff) + goto out; + printk("%c", val & 0xff); + val >>= 8; + } + } +out: + printk("\n"); + pci_iounmap(pdev, cis); + + return 0; +} + +static int __devinit pluto2_probe(struct pci_dev *pdev, + const struct pci_device_id *ent) +{ + struct pluto *pluto; + struct dvb_adapter *dvb_adapter; + struct dvb_demux *dvbdemux; + struct dmx_demux *dmx; + int ret = -ENOMEM; + + pluto = kmalloc(sizeof(struct pluto), GFP_KERNEL); + if (!pluto) + goto out; + + memset(pluto, 0, sizeof(struct pluto)); + pluto->pdev = pdev; + + ret = pci_enable_device(pdev); + if (ret < 0) + goto err_kfree; + + /* enable interrupts */ + pci_write_config_dword(pdev, 0x6c, 0x8000); + + ret = pci_set_dma_mask(pdev, DMA_32BIT_MASK); + if (ret < 0) + goto err_pci_disable_device; + + pci_set_master(pdev); + + ret = pci_request_regions(pdev, DRIVER_NAME); + if (ret < 0) + goto err_pci_disable_device; + + pluto->io_mem = pci_iomap(pdev, 0, 0x40); + if (!pluto->io_mem) { + ret = -EIO; + goto err_pci_release_regions; + } + + pci_set_drvdata(pdev, pluto); + + ret = request_irq(pdev->irq, pluto_irq, SA_SHIRQ, DRIVER_NAME, pluto); + if (ret < 0) + goto err_pci_iounmap; + + ret = pluto_hw_init(pluto); + if (ret < 0) + goto err_free_irq; + + /* i2c */ + i2c_set_adapdata(&pluto->i2c_adap, pluto); + strcpy(pluto->i2c_adap.name, DRIVER_NAME); + pluto->i2c_adap.owner = THIS_MODULE; + pluto->i2c_adap.id = I2C_ALGO_BIT; + pluto->i2c_adap.class = I2C_CLASS_TV_DIGITAL; + pluto->i2c_adap.dev.parent = &pdev->dev; + pluto->i2c_adap.algo_data = &pluto->i2c_bit; + pluto->i2c_bit.data = pluto; + pluto->i2c_bit.setsda = pluto_setsda; + pluto->i2c_bit.setscl = pluto_setscl; + pluto->i2c_bit.getsda = pluto_getsda; + pluto->i2c_bit.getscl = pluto_getscl; + pluto->i2c_bit.udelay = 10; + pluto->i2c_bit.timeout = 10; + + /* Raise SCL and SDA */ + pluto_setsda(pluto, 1); + pluto_setscl(pluto, 1); + + ret = i2c_bit_add_bus(&pluto->i2c_adap); + if (ret < 0) + goto err_pluto_hw_exit; + + /* dvb */ + ret = dvb_register_adapter(&pluto->dvb_adapter, DRIVER_NAME, THIS_MODULE); + if (ret < 0) + goto err_i2c_bit_del_bus; + + dvb_adapter = &pluto->dvb_adapter; + + pluto_read_rev(pluto); + pluto_read_serial(pluto); + pluto_read_mac(pluto, dvb_adapter->proposed_mac); + + dvbdemux = &pluto->demux; + dvbdemux->filternum = 256; + dvbdemux->feednum = 256; + dvbdemux->start_feed = pluto_start_feed; + dvbdemux->stop_feed = pluto_stop_feed; + dvbdemux->dmx.capabilities = (DMX_TS_FILTERING | + DMX_SECTION_FILTERING | DMX_MEMORY_BASED_FILTERING); + ret = dvb_dmx_init(dvbdemux); + if (ret < 0) + goto err_dvb_unregister_adapter; + + dmx = &dvbdemux->dmx; + + pluto->hw_frontend.source = DMX_FRONTEND_0; + pluto->mem_frontend.source = DMX_MEMORY_FE; + pluto->dmxdev.filternum = NHWFILTERS; + pluto->dmxdev.demux = dmx; + + ret = dvb_dmxdev_init(&pluto->dmxdev, dvb_adapter); + if (ret < 0) + goto err_dvb_dmx_release; + + ret = dmx->add_frontend(dmx, &pluto->hw_frontend); + if (ret < 0) + goto err_dvb_dmxdev_release; + + ret = dmx->add_frontend(dmx, &pluto->mem_frontend); + if (ret < 0) + goto err_remove_hw_frontend; + + ret = dmx->connect_frontend(dmx, &pluto->hw_frontend); + if (ret < 0) + goto err_remove_mem_frontend; + + ret = frontend_init(pluto); + if (ret < 0) + goto err_disconnect_frontend; + + dvb_net_init(dvb_adapter, &pluto->dvbnet, dmx); +out: + return ret; + +err_disconnect_frontend: + dmx->disconnect_frontend(dmx); +err_remove_mem_frontend: + dmx->remove_frontend(dmx, &pluto->mem_frontend); +err_remove_hw_frontend: + dmx->remove_frontend(dmx, &pluto->hw_frontend); +err_dvb_dmxdev_release: + dvb_dmxdev_release(&pluto->dmxdev); +err_dvb_dmx_release: + dvb_dmx_release(dvbdemux); +err_dvb_unregister_adapter: + dvb_unregister_adapter(dvb_adapter); +err_i2c_bit_del_bus: + i2c_bit_del_bus(&pluto->i2c_adap); +err_pluto_hw_exit: + pluto_hw_exit(pluto); +err_free_irq: + free_irq(pdev->irq, pluto); +err_pci_iounmap: + pci_iounmap(pdev, pluto->io_mem); +err_pci_release_regions: + pci_release_regions(pdev); +err_pci_disable_device: + pci_disable_device(pdev); +err_kfree: + pci_set_drvdata(pdev, NULL); + kfree(pluto); + goto out; +} + +static void __devexit pluto2_remove(struct pci_dev *pdev) +{ + struct pluto *pluto = pci_get_drvdata(pdev); + struct dvb_adapter *dvb_adapter = &pluto->dvb_adapter; + struct dvb_demux *dvbdemux = &pluto->demux; + struct dmx_demux *dmx = &dvbdemux->dmx; + + dmx->close(dmx); + dvb_net_release(&pluto->dvbnet); + if (pluto->fe) + dvb_unregister_frontend(pluto->fe); + + dmx->disconnect_frontend(dmx); + dmx->remove_frontend(dmx, &pluto->mem_frontend); + dmx->remove_frontend(dmx, &pluto->hw_frontend); + dvb_dmxdev_release(&pluto->dmxdev); + dvb_dmx_release(dvbdemux); + dvb_unregister_adapter(dvb_adapter); + i2c_bit_del_bus(&pluto->i2c_adap); + pluto_hw_exit(pluto); + free_irq(pdev->irq, pluto); + pci_iounmap(pdev, pluto->io_mem); + pci_release_regions(pdev); + pci_disable_device(pdev); + pci_set_drvdata(pdev, NULL); + kfree(pluto); +} + +#ifndef PCI_VENDOR_ID_SCM +#define PCI_VENDOR_ID_SCM 0x0432 +#endif +#ifndef PCI_DEVICE_ID_PLUTO2 +#define PCI_DEVICE_ID_PLUTO2 0x0001 +#endif + +static struct pci_device_id pluto2_id_table[] __devinitdata = { + { + .vendor = PCI_VENDOR_ID_SCM, + .device = PCI_DEVICE_ID_PLUTO2, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + }, { + /* empty */ + }, +}; + +MODULE_DEVICE_TABLE(pci, pluto2_id_table); + +static struct pci_driver pluto2_driver = { + .name = DRIVER_NAME, + .id_table = pluto2_id_table, + .probe = pluto2_probe, + .remove = __devexit_p(pluto2_remove), +}; + +static int __init pluto2_init(void) +{ + return pci_register_driver(&pluto2_driver); +} + +static void __exit pluto2_exit(void) +{ + pci_unregister_driver(&pluto2_driver); +} + +module_init(pluto2_init); +module_exit(pluto2_exit); + +MODULE_AUTHOR("Andreas Oberritter <obi@linuxtv.org>"); +MODULE_DESCRIPTION("Pluto2 driver"); +MODULE_LICENSE("GPL"); |