diff options
Diffstat (limited to 'drivers/media/video/Kconfig')
| -rw-r--r-- | drivers/media/video/Kconfig | 235 |
1 files changed, 77 insertions, 158 deletions
diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig index 3e9e0dcd217..47102c2c825 100644 --- a/drivers/media/video/Kconfig +++ b/drivers/media/video/Kconfig @@ -34,6 +34,7 @@ config VIDEOBUF_DVB select VIDEOBUF_GEN config VIDEO_BTCX + depends on PCI tristate config VIDEO_IR @@ -71,6 +72,15 @@ config VIDEO_ADV_DEBUG V4L devices. In doubt, say N. +config VIDEO_FIXED_MINOR_RANGES + bool "Enable old-style fixed minor ranges for video devices" + default n + ---help--- + Say Y here to enable the old-style fixed-range minor assignments. + Only useful if you rely on the old behavior and use mknod instead of udev. + + When in doubt, say N. + config VIDEO_HELPER_CHIPS_AUTO bool "Autoselect pertinent encoders/decoders and other helper chips" default y @@ -578,13 +588,6 @@ config VIDEO_SAA5249 To compile this driver as a module, choose M here: the module will be called saa5249. -config TUNER_3036 - tristate "SAB3036 tuner" - depends on I2C && VIDEO_V4L1 - help - Say Y here to include support for Philips SAB3036 compatible tuners. - If in doubt, say N. - config VIDEO_VINO tristate "SGI Vino Video For Linux (EXPERIMENTAL)" depends on I2C && SGI_IP22 && EXPERIMENTAL && VIDEO_V4L2 @@ -602,79 +605,7 @@ config VIDEO_STRADIS driver for PCI. There is a product page at <http://www.stradis.com/>. -config VIDEO_ZORAN - tristate "Zoran ZR36057/36067 Video For Linux" - depends on PCI && I2C_ALGOBIT && VIDEO_V4L1 && VIRT_TO_BUS - help - Say Y for support for MJPEG capture cards based on the Zoran - 36057/36067 PCI controller chipset. This includes the Iomega - Buz, Pinnacle DC10+ and the Linux Media Labs LML33. There is - a driver homepage at <http://mjpeg.sf.net/driver-zoran/>. For - more information, check <file:Documentation/video4linux/Zoran>. - - To compile this driver as a module, choose M here: the - module will be called zr36067. - -config VIDEO_ZORAN_DC30 - tristate "Pinnacle/Miro DC30(+) support" - depends on VIDEO_ZORAN - select VIDEO_ADV7175 if VIDEO_HELPER_CHIPS_AUTO - select VIDEO_VPX3220 if VIDEO_HELPER_CHIPS_AUTO - help - Support for the Pinnacle/Miro DC30(+) MJPEG capture/playback - card. This also supports really old DC10 cards based on the - zr36050 MJPEG codec and zr36016 VFE. - -config VIDEO_ZORAN_ZR36060 - tristate "Zoran ZR36060" - depends on VIDEO_ZORAN - help - Say Y to support Zoran boards based on 36060 chips. - This includes Iomega Buz, Pinnacle DC10, Linux media Labs 33 - and 33 R10 and AverMedia 6 boards. - -config VIDEO_ZORAN_BUZ - tristate "Iomega Buz support" - depends on VIDEO_ZORAN_ZR36060 - select VIDEO_SAA7111 if VIDEO_HELPER_CHIPS_AUTO - select VIDEO_SAA7185 if VIDEO_HELPER_CHIPS_AUTO - help - Support for the Iomega Buz MJPEG capture/playback card. - -config VIDEO_ZORAN_DC10 - tristate "Pinnacle/Miro DC10(+) support" - depends on VIDEO_ZORAN_ZR36060 - select VIDEO_SAA7110 if VIDEO_HELPER_CHIPS_AUTO - select VIDEO_ADV7175 if VIDEO_HELPER_CHIPS_AUTO - help - Support for the Pinnacle/Miro DC10(+) MJPEG capture/playback - card. - -config VIDEO_ZORAN_LML33 - tristate "Linux Media Labs LML33 support" - depends on VIDEO_ZORAN_ZR36060 - select VIDEO_BT819 if VIDEO_HELPER_CHIPS_AUTO - select VIDEO_BT856 if VIDEO_HELPER_CHIPS_AUTO - help - Support for the Linux Media Labs LML33 MJPEG capture/playback - card. - -config VIDEO_ZORAN_LML33R10 - tristate "Linux Media Labs LML33R10 support" - depends on VIDEO_ZORAN_ZR36060 - select VIDEO_SAA7114 if VIDEO_HELPER_CHIPS_AUTO - select VIDEO_ADV7170 if VIDEO_HELPER_CHIPS_AUTO - help - support for the Linux Media Labs LML33R10 MJPEG capture/playback - card. - -config VIDEO_ZORAN_AVS6EYES - tristate "AverMedia 6 Eyes support (EXPERIMENTAL)" - depends on VIDEO_ZORAN_ZR36060 && EXPERIMENTAL && VIDEO_V4L1 - select VIDEO_BT856 if VIDEO_HELPER_CHIPS_AUTO - select VIDEO_KS0127 if VIDEO_HELPER_CHIPS_AUTO - help - Support for the AverMedia 6 Eyes video surveillance card. +source "drivers/media/video/zoran/Kconfig" config VIDEO_MEYE tristate "Sony Vaio Picturebook Motion Eye Video For Linux" @@ -697,7 +628,7 @@ config VIDEO_MXB depends on PCI && VIDEO_V4L1 && I2C select VIDEO_SAA7146_VV select VIDEO_TUNER - select VIDEO_SAA7111 if VIDEO_HELPER_CHIPS_AUTO + select VIDEO_SAA7115 if VIDEO_HELPER_CHIPS_AUTO select VIDEO_TDA9840 if VIDEO_HELPER_CHIPS_AUTO select VIDEO_TEA6415C if VIDEO_HELPER_CHIPS_AUTO select VIDEO_TEA6420 if VIDEO_HELPER_CHIPS_AUTO @@ -708,21 +639,6 @@ config VIDEO_MXB To compile this driver as a module, choose M here: the module will be called mxb. -config VIDEO_DPC - tristate "Philips-Semiconductors 'dpc7146 demonstration board'" - depends on PCI && VIDEO_V4L1 && I2C - select VIDEO_SAA7146_VV - select VIDEO_SAA7111 if VIDEO_HELPER_CHIPS_AUTO - ---help--- - This is a video4linux driver for the 'dpc7146 demonstration - board' by Philips-Semiconductors. It's the reference design - for SAA7146 bases boards, so if you have some unsupported - saa7146 based, analog video card, chances are good that it - will work with this skeleton driver. - - To compile this driver as a module, choose M here: the - module will be called dpc7146. - config VIDEO_HEXIUM_ORION tristate "Hexium HV-PCI6 and Orion frame grabber" depends on PCI && VIDEO_V4L2 && I2C @@ -784,6 +700,70 @@ config VIDEO_CAFE_CCIC CMOS camera controller. This is the controller found on first- generation OLPC systems. +config SOC_CAMERA + tristate "SoC camera support" + depends on VIDEO_V4L2 && HAS_DMA + select VIDEOBUF_GEN + help + SoC Camera is a common API to several cameras, not connecting + over a bus like PCI or USB. For example some i2c camera connected + directly to the data bus of an SoC. + +config SOC_CAMERA_MT9M001 + tristate "mt9m001 support" + depends on SOC_CAMERA && I2C + select GPIO_PCA953X if MT9M001_PCA9536_SWITCH + help + This driver supports MT9M001 cameras from Micron, monochrome + and colour models. + +config MT9M001_PCA9536_SWITCH + bool "pca9536 datawidth switch for mt9m001" + depends on SOC_CAMERA_MT9M001 && GENERIC_GPIO + help + Select this if your MT9M001 camera uses a PCA9536 I2C GPIO + extender to switch between 8 and 10 bit datawidth modes + +config SOC_CAMERA_MT9M111 + tristate "mt9m111 support" + depends on SOC_CAMERA && I2C + help + This driver supports MT9M111 cameras from Micron + +config SOC_CAMERA_MT9V022 + tristate "mt9v022 support" + depends on SOC_CAMERA && I2C + select GPIO_PCA953X if MT9V022_PCA9536_SWITCH + help + This driver supports MT9V022 cameras from Micron + +config MT9V022_PCA9536_SWITCH + bool "pca9536 datawidth switch for mt9v022" + depends on SOC_CAMERA_MT9V022 && GENERIC_GPIO + help + Select this if your MT9V022 camera uses a PCA9536 I2C GPIO + extender to switch between 8 and 10 bit datawidth modes + +config SOC_CAMERA_PLATFORM + tristate "platform camera support" + depends on SOC_CAMERA + help + This is a generic SoC camera platform driver, useful for testing + +config VIDEO_PXA27x + tristate "PXA27x Quick Capture Interface driver" + depends on VIDEO_DEV && PXA27x && SOC_CAMERA + select VIDEOBUF_DMA_SG + ---help--- + This is a v4l2 driver for the PXA27x Quick Capture Interface + +config VIDEO_SH_MOBILE_CEU + tristate "SuperH Mobile CEU Interface driver" + depends on VIDEO_DEV && SOC_CAMERA && HAS_DMA + select VIDEOBUF_DMA_CONTIG + ---help--- + This is a v4l2 driver for the SuperH Mobile CEU Interface + # # USB Multimedia device configuration # @@ -822,8 +802,7 @@ config VIDEO_OVCAMCHIP config USB_W9968CF tristate "USB W996[87]CF JPEG Dual Mode Camera support" - depends on VIDEO_V4L1 && I2C - select VIDEO_OVCAMCHIP + depends on VIDEO_V4L1 && I2C && VIDEO_OVCAMCHIP ---help--- Say Y here if you want support for cameras based on OV681 or Winbond W9967CF/W9968CF JPEG USB Dual Mode Camera Chips. @@ -914,64 +893,4 @@ config USB_S2255 endif # V4L_USB_DRIVERS -config SOC_CAMERA - tristate "SoC camera support" - depends on VIDEO_V4L2 && HAS_DMA - select VIDEOBUF_GEN - help - SoC Camera is a common API to several cameras, not connecting - over a bus like PCI or USB. For example some i2c camera connected - directly to the data bus of an SoC. - -config SOC_CAMERA_MT9M001 - tristate "mt9m001 support" - depends on SOC_CAMERA && I2C - select GPIO_PCA953X if MT9M001_PCA9536_SWITCH - help - This driver supports MT9M001 cameras from Micron, monochrome - and colour models. - -config MT9M001_PCA9536_SWITCH - bool "pca9536 datawidth switch for mt9m001" - depends on SOC_CAMERA_MT9M001 && GENERIC_GPIO - help - Select this if your MT9M001 camera uses a PCA9536 I2C GPIO - extender to switch between 8 and 10 bit datawidth modes - -config SOC_CAMERA_MT9V022 - tristate "mt9v022 support" - depends on SOC_CAMERA && I2C - select GPIO_PCA953X if MT9V022_PCA9536_SWITCH - help - This driver supports MT9V022 cameras from Micron - -config MT9V022_PCA9536_SWITCH - bool "pca9536 datawidth switch for mt9v022" - depends on SOC_CAMERA_MT9V022 && GENERIC_GPIO - help - Select this if your MT9V022 camera uses a PCA9536 I2C GPIO - extender to switch between 8 and 10 bit datawidth modes - -config SOC_CAMERA_PLATFORM - tristate "platform camera support" - depends on SOC_CAMERA - help - This is a generic SoC camera platform driver, useful for testing - -config VIDEO_PXA27x - tristate "PXA27x Quick Capture Interface driver" - depends on VIDEO_DEV && PXA27x - select SOC_CAMERA - select VIDEOBUF_DMA_SG - ---help--- - This is a v4l2 driver for the PXA27x Quick Capture Interface - -config VIDEO_SH_MOBILE_CEU - tristate "SuperH Mobile CEU Interface driver" - depends on VIDEO_DEV && HAS_DMA - select SOC_CAMERA - select VIDEOBUF_DMA_CONTIG - ---help--- - This is a v4l2 driver for the SuperH Mobile CEU Interface - endif # VIDEO_CAPTURE_DRIVERS |