diff options
Diffstat (limited to 'drivers/media')
-rw-r--r-- | drivers/media/dvb/ttpci/budget.c | 118 |
1 files changed, 108 insertions, 10 deletions
diff --git a/drivers/media/dvb/ttpci/budget.c b/drivers/media/dvb/ttpci/budget.c index 43d6c826864..0f6ead848e4 100644 --- a/drivers/media/dvb/ttpci/budget.c +++ b/drivers/media/dvb/ttpci/budget.c @@ -226,12 +226,14 @@ static int lnbp21_enable_high_lnb_voltage(struct dvb_frontend* fe, int arg) return 0; } -static void lnbp21_init(struct budget* budget) +static int lnbp21_init(struct budget* budget) { u8 buf = 0x00; struct i2c_msg msg = { .addr = 0x08, .flags = 0, .buf = &buf, .len = sizeof(buf) }; - i2c_transfer (&budget->i2c_adap, &msg, 1); + if (i2c_transfer (&budget->i2c_adap, &msg, 1) != 1) + return -EIO; + return 0; } static int alps_bsrv2_pll_set(struct dvb_frontend* fe, struct dvb_frontend_parameters* params) @@ -273,7 +275,7 @@ static u8 alps_bsru6_inittab[] = { 0x01, 0x15, 0x02, 0x00, 0x03, 0x00, - 0x04, 0x7d, /* F22FR = 0x7d, F22 = f_VCO / 128 / 0x7d = 22 kHz */ + 0x04, 0x7d, /* F22FR = 0x7d, F22 = f_VCO / 128 / 0x7d = 22 kHz */ 0x05, 0x35, /* I2CT = 0, SCLT = 1, SDAT = 1 */ 0x06, 0x40, /* DAC not used, set to high impendance mode */ 0x07, 0x00, /* DAC LSB */ @@ -367,6 +369,80 @@ static struct stv0299_config alps_bsru6_config = { .pll_set = alps_bsru6_pll_set, }; +static u8 alps_bsbe1_inittab[] = { + 0x01, 0x15, + 0x02, 0x30, + 0x03, 0x00, + 0x04, 0x7d, /* F22FR = 0x7d, F22 = f_VCO / 128 / 0x7d = 22 kHz */ + 0x05, 0x35, /* I2CT = 0, SCLT = 1, SDAT = 1 */ + 0x06, 0x40, /* DAC not used, set to high impendance mode */ + 0x07, 0x00, /* DAC LSB */ + 0x08, 0x40, /* DiSEqC off, LNB power on OP2/LOCK pin on */ + 0x09, 0x00, /* FIFO */ + 0x0c, 0x51, /* OP1 ctl = Normal, OP1 val = 1 (LNB Power ON) */ + 0x0d, 0x82, /* DC offset compensation = ON, beta_agc1 = 2 */ + 0x0e, 0x23, /* alpha_tmg = 2, beta_tmg = 3 */ + 0x10, 0x3f, // AGC2 0x3d + 0x11, 0x84, + 0x12, 0xb5, // Lock detect: -64 Carrier freq detect:on + 0x15, 0xc9, // lock detector threshold + 0x16, 0x00, + 0x17, 0x00, + 0x18, 0x00, + 0x19, 0x00, + 0x1a, 0x00, + 0x1f, 0x50, + 0x20, 0x00, + 0x21, 0x00, + 0x22, 0x00, + 0x23, 0x00, + 0x28, 0x00, // out imp: normal out type: parallel FEC mode:0 + 0x29, 0x1e, // 1/2 threshold + 0x2a, 0x14, // 2/3 threshold + 0x2b, 0x0f, // 3/4 threshold + 0x2c, 0x09, // 5/6 threshold + 0x2d, 0x05, // 7/8 threshold + 0x2e, 0x01, + 0x31, 0x1f, // test all FECs + 0x32, 0x19, // viterbi and synchro search + 0x33, 0xfc, // rs control + 0x34, 0x93, // error control + 0x0f, 0x92, // 0x80 = inverse AGC + 0xff, 0xff +}; + +static int alps_bsbe1_pll_set(struct dvb_frontend* fe, struct i2c_adapter *i2c, struct dvb_frontend_parameters* params) +{ + int ret; + u8 data[4]; + u32 div; + struct i2c_msg msg = { .addr = 0x61, .flags = 0, .buf = data, .len = sizeof(data) }; + + if ((params->frequency < 950000) || (params->frequency > 2150000)) + return -EINVAL; + + div = (params->frequency + (125 - 1)) / 125; // round correctly + data[0] = (div >> 8) & 0x7f; + data[1] = div & 0xff; + data[2] = 0x80 | ((div & 0x18000) >> 10) | 4; + data[3] = (params->frequency > 1530000) ? 0xE0 : 0xE4; + + ret = i2c_transfer(i2c, &msg, 1); + return (ret != 1) ? -EIO : 0; +} + +static struct stv0299_config alps_bsbe1_config = { + .demod_address = 0x68, + .inittab = alps_bsbe1_inittab, + .mclk = 88000000UL, + .invert = 1, + .enhanced_tuning = 0, + .skip_reinit = 0, + .min_delay_ms = 100, + .set_symbol_rate = alps_bsru6_set_symbol_rate, + .pll_set = alps_bsbe1_pll_set, +}; + static int alps_tdbe2_pll_set(struct dvb_frontend* fe, struct dvb_frontend_parameters* params) { struct budget* budget = (struct budget*) fe->dvb->priv; @@ -500,6 +576,19 @@ static u8 read_pwm(struct budget* budget) static void frontend_init(struct budget *budget) { switch(budget->dev->pci->subsystem_device) { + case 0x1017: + // try the ALPS BSBE1 now + budget->dvb_frontend = stv0299_attach(&alps_bsbe1_config, &budget->i2c_adap); + if (budget->dvb_frontend) { + budget->dvb_frontend->ops->set_voltage = lnbp21_set_voltage; + budget->dvb_frontend->ops->enable_high_lnb_voltage = lnbp21_enable_high_lnb_voltage; + if (lnbp21_init(budget)) { + printk("%s: No LNBP21 found!\n", __FUNCTION__); + goto error_out; + } + } + + break; case 0x1003: // Hauppauge/TT Nova budget (stv0299/ALPS BSRU6(tsa5059) OR ves1893/ALPS BSRV2(sp5659)) case 0x1013: // try the ALPS BSRV2 first of all @@ -554,7 +643,10 @@ static void frontend_init(struct budget *budget) if (budget->dvb_frontend) { budget->dvb_frontend->ops->set_voltage = lnbp21_set_voltage; budget->dvb_frontend->ops->enable_high_lnb_voltage = lnbp21_enable_high_lnb_voltage; - lnbp21_init(budget); + if (lnbp21_init(budget)) { + printk("%s: No LNBP21 found!\n", __FUNCTION__); + goto error_out; + } break; } } @@ -566,13 +658,17 @@ static void frontend_init(struct budget *budget) budget->dev->pci->subsystem_vendor, budget->dev->pci->subsystem_device); } else { - if (dvb_register_frontend(&budget->dvb_adapter, budget->dvb_frontend)) { - printk("budget: Frontend registration failed!\n"); - if (budget->dvb_frontend->ops->release) - budget->dvb_frontend->ops->release(budget->dvb_frontend); - budget->dvb_frontend = NULL; - } + if (dvb_register_frontend(&budget->dvb_adapter, budget->dvb_frontend)) + goto error_out; } + return; + +error_out: + printk("budget: Frontend registration failed!\n"); + if (budget->dvb_frontend->ops->release) + budget->dvb_frontend->ops->release(budget->dvb_frontend); + budget->dvb_frontend = NULL; + return; } static int budget_attach (struct saa7146_dev* dev, struct saa7146_pci_extension_data *info) @@ -618,6 +714,7 @@ static int budget_detach (struct saa7146_dev* dev) static struct saa7146_extension budget_extension; +MAKE_BUDGET_INFO(ttbs2, "TT-Budget/WinTV-NOVA-S PCI (rev AL/alps bsbe1 lnbp21 frontend)", BUDGET_TT); MAKE_BUDGET_INFO(ttbs, "TT-Budget/WinTV-NOVA-S PCI", BUDGET_TT); MAKE_BUDGET_INFO(ttbc, "TT-Budget/WinTV-NOVA-C PCI", BUDGET_TT); MAKE_BUDGET_INFO(ttbt, "TT-Budget/WinTV-NOVA-T PCI", BUDGET_TT); @@ -630,6 +727,7 @@ static struct pci_device_id pci_tbl[] = { MAKE_EXTENSION_PCI(ttbc, 0x13c2, 0x1004), MAKE_EXTENSION_PCI(ttbt, 0x13c2, 0x1005), MAKE_EXTENSION_PCI(satel, 0x13c2, 0x1013), + MAKE_EXTENSION_PCI(ttbs2, 0x13c2, 0x1017), MAKE_EXTENSION_PCI(ttbs, 0x13c2, 0x1016), MAKE_EXTENSION_PCI(fsacs1,0x1131, 0x4f60), MAKE_EXTENSION_PCI(fsacs0,0x1131, 0x4f61), |