aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/e1000/e1000_hw.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/e1000/e1000_hw.c')
-rw-r--r--drivers/net/e1000/e1000_hw.c115
1 files changed, 58 insertions, 57 deletions
diff --git a/drivers/net/e1000/e1000_hw.c b/drivers/net/e1000/e1000_hw.c
index 523c2c9fc0a..3959039b16e 100644
--- a/drivers/net/e1000/e1000_hw.c
+++ b/drivers/net/e1000/e1000_hw.c
@@ -1,7 +1,7 @@
/*******************************************************************************
- Copyright(c) 1999 - 2005 Intel Corporation. All rights reserved.
+ Copyright(c) 1999 - 2006 Intel Corporation. All rights reserved.
This program is free software; you can redistribute it and/or modify it
under the terms of the GNU General Public License as published by the Free
@@ -22,6 +22,7 @@
Contact Information:
Linux NICS <linux.nics@intel.com>
+ e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
*******************************************************************************/
@@ -764,7 +765,7 @@ e1000_init_hw(struct e1000_hw *hw)
}
if (hw->mac_type == e1000_82573) {
- e1000_enable_tx_pkt_filtering(hw);
+ e1000_enable_tx_pkt_filtering(hw);
}
switch (hw->mac_type) {
@@ -860,7 +861,7 @@ e1000_adjust_serdes_amplitude(struct e1000_hw *hw)
if(eeprom_data != EEPROM_RESERVED_WORD) {
/* Adjust SERDES output amplitude only. */
- eeprom_data &= EEPROM_SERDES_AMPLITUDE_MASK;
+ eeprom_data &= EEPROM_SERDES_AMPLITUDE_MASK;
ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_EXT_CTRL, eeprom_data);
if(ret_val)
return ret_val;
@@ -1227,7 +1228,7 @@ e1000_copper_link_igp_setup(struct e1000_hw *hw)
if (hw->phy_reset_disable)
return E1000_SUCCESS;
-
+
ret_val = e1000_phy_reset(hw);
if (ret_val) {
DEBUGOUT("Error Resetting the PHY\n");
@@ -1369,7 +1370,7 @@ e1000_copper_link_ggp_setup(struct e1000_hw *hw)
DEBUGFUNC("e1000_copper_link_ggp_setup");
if(!hw->phy_reset_disable) {
-
+
/* Enable CRS on TX for half-duplex operation. */
ret_val = e1000_read_phy_reg(hw, GG82563_PHY_MAC_SPEC_CTRL,
&phy_data);
@@ -1518,7 +1519,7 @@ e1000_copper_link_mgp_setup(struct e1000_hw *hw)
if(hw->phy_reset_disable)
return E1000_SUCCESS;
-
+
/* Enable CRS on TX. This must be set for half-duplex operation. */
ret_val = e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, &phy_data);
if(ret_val)
@@ -1664,7 +1665,7 @@ e1000_copper_link_autoneg(struct e1000_hw *hw)
* collision distance in the Transmit Control Register.
* 2) Set up flow control on the MAC to that established with
* the link partner.
-* 3) Config DSP to improve Gigabit link quality for some PHY revisions.
+* 3) Config DSP to improve Gigabit link quality for some PHY revisions.
*
* hw - Struct containing variables accessed by shared code
******************************************************************************/
@@ -1673,7 +1674,7 @@ e1000_copper_link_postconfig(struct e1000_hw *hw)
{
int32_t ret_val;
DEBUGFUNC("e1000_copper_link_postconfig");
-
+
if(hw->mac_type >= e1000_82544) {
e1000_config_collision_dist(hw);
} else {
@@ -1697,7 +1698,7 @@ e1000_copper_link_postconfig(struct e1000_hw *hw)
return ret_val;
}
}
-
+
return E1000_SUCCESS;
}
@@ -1753,11 +1754,11 @@ e1000_setup_copper_link(struct e1000_hw *hw)
}
if(hw->autoneg) {
- /* Setup autoneg and flow control advertisement
- * and perform autonegotiation */
+ /* Setup autoneg and flow control advertisement
+ * and perform autonegotiation */
ret_val = e1000_copper_link_autoneg(hw);
if(ret_val)
- return ret_val;
+ return ret_val;
} else {
/* PHY will be set to 10H, 10F, 100H,or 100F
* depending on value from forced_speed_duplex. */
@@ -1785,7 +1786,7 @@ e1000_setup_copper_link(struct e1000_hw *hw)
ret_val = e1000_copper_link_postconfig(hw);
if(ret_val)
return ret_val;
-
+
DEBUGOUT("Valid link established!!!\n");
return E1000_SUCCESS;
}
@@ -1983,7 +1984,7 @@ e1000_phy_setup_autoneg(struct e1000_hw *hw)
DEBUGOUT1("Auto-Neg Advertising %x\n", mii_autoneg_adv_reg);
- ret_val = e1000_write_phy_reg(hw, PHY_1000T_CTRL, mii_1000t_ctrl_reg);
+ ret_val = e1000_write_phy_reg(hw, PHY_1000T_CTRL, mii_1000t_ctrl_reg);
if(ret_val)
return ret_val;
@@ -2272,7 +2273,7 @@ e1000_config_mac_to_phy(struct e1000_hw *hw)
DEBUGFUNC("e1000_config_mac_to_phy");
- /* 82544 or newer MAC, Auto Speed Detection takes care of
+ /* 82544 or newer MAC, Auto Speed Detection takes care of
* MAC speed/duplex configuration.*/
if (hw->mac_type >= e1000_82544)
return E1000_SUCCESS;
@@ -2291,9 +2292,9 @@ e1000_config_mac_to_phy(struct e1000_hw *hw)
if(ret_val)
return ret_val;
- if(phy_data & M88E1000_PSSR_DPLX)
+ if(phy_data & M88E1000_PSSR_DPLX)
ctrl |= E1000_CTRL_FD;
- else
+ else
ctrl &= ~E1000_CTRL_FD;
e1000_config_collision_dist(hw);
@@ -2492,10 +2493,10 @@ e1000_config_fc_after_link_up(struct e1000_hw *hw)
*/
if(hw->original_fc == e1000_fc_full) {
hw->fc = e1000_fc_full;
- DEBUGOUT("Flow Control = FULL.\r\n");
+ DEBUGOUT("Flow Control = FULL.\n");
} else {
hw->fc = e1000_fc_rx_pause;
- DEBUGOUT("Flow Control = RX PAUSE frames only.\r\n");
+ DEBUGOUT("Flow Control = RX PAUSE frames only.\n");
}
}
/* For receiving PAUSE frames ONLY.
@@ -2511,7 +2512,7 @@ e1000_config_fc_after_link_up(struct e1000_hw *hw)
(mii_nway_lp_ability_reg & NWAY_LPAR_PAUSE) &&
(mii_nway_lp_ability_reg & NWAY_LPAR_ASM_DIR)) {
hw->fc = e1000_fc_tx_pause;
- DEBUGOUT("Flow Control = TX PAUSE frames only.\r\n");
+ DEBUGOUT("Flow Control = TX PAUSE frames only.\n");
}
/* For transmitting PAUSE frames ONLY.
*
@@ -2526,7 +2527,7 @@ e1000_config_fc_after_link_up(struct e1000_hw *hw)
!(mii_nway_lp_ability_reg & NWAY_LPAR_PAUSE) &&
(mii_nway_lp_ability_reg & NWAY_LPAR_ASM_DIR)) {
hw->fc = e1000_fc_rx_pause;
- DEBUGOUT("Flow Control = RX PAUSE frames only.\r\n");
+ DEBUGOUT("Flow Control = RX PAUSE frames only.\n");
}
/* Per the IEEE spec, at this point flow control should be
* disabled. However, we want to consider that we could
@@ -2552,10 +2553,10 @@ e1000_config_fc_after_link_up(struct e1000_hw *hw)
hw->original_fc == e1000_fc_tx_pause) ||
hw->fc_strict_ieee) {
hw->fc = e1000_fc_none;
- DEBUGOUT("Flow Control = NONE.\r\n");
+ DEBUGOUT("Flow Control = NONE.\n");
} else {
hw->fc = e1000_fc_rx_pause;
- DEBUGOUT("Flow Control = RX PAUSE frames only.\r\n");
+ DEBUGOUT("Flow Control = RX PAUSE frames only.\n");
}
/* Now we need to do one last check... If we auto-
@@ -2580,7 +2581,7 @@ e1000_config_fc_after_link_up(struct e1000_hw *hw)
return ret_val;
}
} else {
- DEBUGOUT("Copper PHY and Auto Neg has not completed.\r\n");
+ DEBUGOUT("Copper PHY and Auto Neg has not completed.\n");
}
}
return E1000_SUCCESS;
@@ -2763,7 +2764,7 @@ e1000_check_for_link(struct e1000_hw *hw)
hw->autoneg_failed = 1;
return 0;
}
- DEBUGOUT("NOT RXing /C/, disable AutoNeg and force link.\r\n");
+ DEBUGOUT("NOT RXing /C/, disable AutoNeg and force link.\n");
/* Disable auto-negotiation in the TXCW register */
E1000_WRITE_REG(hw, TXCW, (hw->txcw & ~E1000_TXCW_ANE));
@@ -2788,7 +2789,7 @@ e1000_check_for_link(struct e1000_hw *hw)
else if(((hw->media_type == e1000_media_type_fiber) ||
(hw->media_type == e1000_media_type_internal_serdes)) &&
(ctrl & E1000_CTRL_SLU) && (rxcw & E1000_RXCW_C)) {
- DEBUGOUT("RXing /C/, enable AutoNeg and stop forcing link.\r\n");
+ DEBUGOUT("RXing /C/, enable AutoNeg and stop forcing link.\n");
E1000_WRITE_REG(hw, TXCW, hw->txcw);
E1000_WRITE_REG(hw, CTRL, (ctrl & ~E1000_CTRL_SLU));
@@ -2851,13 +2852,13 @@ e1000_get_speed_and_duplex(struct e1000_hw *hw,
if(status & E1000_STATUS_FD) {
*duplex = FULL_DUPLEX;
- DEBUGOUT("Full Duplex\r\n");
+ DEBUGOUT("Full Duplex\n");
} else {
*duplex = HALF_DUPLEX;
- DEBUGOUT(" Half Duplex\r\n");
+ DEBUGOUT(" Half Duplex\n");
}
} else {
- DEBUGOUT("1000 Mbs, Full Duplex\r\n");
+ DEBUGOUT("1000 Mbs, Full Duplex\n");
*speed = SPEED_1000;
*duplex = FULL_DUPLEX;
}
@@ -2883,7 +2884,7 @@ e1000_get_speed_and_duplex(struct e1000_hw *hw,
}
}
- if ((hw->mac_type == e1000_80003es2lan) &&
+ if ((hw->mac_type == e1000_80003es2lan) &&
(hw->media_type == e1000_media_type_copper)) {
if (*speed == SPEED_1000)
ret_val = e1000_configure_kmrn_for_1000(hw);
@@ -3159,7 +3160,7 @@ e1000_read_phy_reg(struct e1000_hw *hw,
if (e1000_swfw_sync_acquire(hw, swfw))
return -E1000_ERR_SWFW_SYNC;
- if((hw->phy_type == e1000_phy_igp ||
+ if((hw->phy_type == e1000_phy_igp ||
hw->phy_type == e1000_phy_igp_2) &&
(reg_addr > MAX_PHY_MULTI_PAGE_REG)) {
ret_val = e1000_write_phy_reg_ex(hw, IGP01E1000_PHY_PAGE_SELECT,
@@ -3298,7 +3299,7 @@ e1000_write_phy_reg(struct e1000_hw *hw,
if (e1000_swfw_sync_acquire(hw, swfw))
return -E1000_ERR_SWFW_SYNC;
- if((hw->phy_type == e1000_phy_igp ||
+ if((hw->phy_type == e1000_phy_igp ||
hw->phy_type == e1000_phy_igp_2) &&
(reg_addr > MAX_PHY_MULTI_PAGE_REG)) {
ret_val = e1000_write_phy_reg_ex(hw, IGP01E1000_PHY_PAGE_SELECT,
@@ -3496,22 +3497,22 @@ e1000_phy_hw_reset(struct e1000_hw *hw)
}
/* Read the device control register and assert the E1000_CTRL_PHY_RST
* bit. Then, take it out of reset.
- * For pre-e1000_82571 hardware, we delay for 10ms between the assert
+ * For pre-e1000_82571 hardware, we delay for 10ms between the assert
* and deassert. For e1000_82571 hardware and later, we instead delay
* for 50us between and 10ms after the deassertion.
*/
ctrl = E1000_READ_REG(hw, CTRL);
E1000_WRITE_REG(hw, CTRL, ctrl | E1000_CTRL_PHY_RST);
E1000_WRITE_FLUSH(hw);
-
- if (hw->mac_type < e1000_82571)
+
+ if (hw->mac_type < e1000_82571)
msec_delay(10);
else
udelay(100);
-
+
E1000_WRITE_REG(hw, CTRL, ctrl);
E1000_WRITE_FLUSH(hw);
-
+
if (hw->mac_type >= e1000_82571)
msec_delay(10);
e1000_swfw_sync_release(hw, swfw);
@@ -3815,7 +3816,7 @@ e1000_phy_m88_get_info(struct e1000_hw *hw,
/* Check polarity status */
ret_val = e1000_check_polarity(hw, &polarity);
if(ret_val)
- return ret_val;
+ return ret_val;
phy_info->cable_polarity = polarity;
ret_val = e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_STATUS, &phy_data);
@@ -4540,14 +4541,14 @@ e1000_read_eeprom_eerd(struct e1000_hw *hw,
E1000_WRITE_REG(hw, EERD, eerd);
error = e1000_poll_eerd_eewr_done(hw, E1000_EEPROM_POLL_READ);
-
+
if(error) {
break;
}
data[i] = (E1000_READ_REG(hw, EERD) >> E1000_EEPROM_RW_REG_DATA);
-
+
}
-
+
return error;
}
@@ -4573,24 +4574,24 @@ e1000_write_eeprom_eewr(struct e1000_hw *hw,
return -E1000_ERR_SWFW_SYNC;
for (i = 0; i < words; i++) {
- register_value = (data[i] << E1000_EEPROM_RW_REG_DATA) |
- ((offset+i) << E1000_EEPROM_RW_ADDR_SHIFT) |
+ register_value = (data[i] << E1000_EEPROM_RW_REG_DATA) |
+ ((offset+i) << E1000_EEPROM_RW_ADDR_SHIFT) |
E1000_EEPROM_RW_REG_START;
error = e1000_poll_eerd_eewr_done(hw, E1000_EEPROM_POLL_WRITE);
if(error) {
break;
- }
+ }
E1000_WRITE_REG(hw, EEWR, register_value);
-
+
error = e1000_poll_eerd_eewr_done(hw, E1000_EEPROM_POLL_WRITE);
-
+
if(error) {
break;
- }
+ }
}
-
+
e1000_swfw_sync_release(hw, E1000_SWFW_EEP_SM);
return error;
}
@@ -4610,7 +4611,7 @@ e1000_poll_eerd_eewr_done(struct e1000_hw *hw, int eerd)
for(i = 0; i < attempts; i++) {
if(eerd == E1000_EEPROM_POLL_READ)
reg = E1000_READ_REG(hw, EERD);
- else
+ else
reg = E1000_READ_REG(hw, EEWR);
if(reg & E1000_EEPROM_RW_REG_DONE) {
@@ -5135,7 +5136,7 @@ e1000_mc_addr_list_update(struct e1000_hw *hw,
uint32_t i;
uint32_t num_rar_entry;
uint32_t num_mta_entry;
-
+
DEBUGFUNC("e1000_mc_addr_list_update");
/* Set the new number of MC addresses that we are being requested to use. */
@@ -6240,7 +6241,7 @@ e1000_check_polarity(struct e1000_hw *hw,
* 1 - Downshift ocured.
*
* returns: - E1000_ERR_XXX
- * E1000_SUCCESS
+ * E1000_SUCCESS
*
* For phy's older then IGP, this function reads the Downshift bit in the Phy
* Specific Status register. For IGP phy's, it reads the Downgrade bit in the
@@ -6255,7 +6256,7 @@ e1000_check_downshift(struct e1000_hw *hw)
DEBUGFUNC("e1000_check_downshift");
- if(hw->phy_type == e1000_phy_igp ||
+ if(hw->phy_type == e1000_phy_igp ||
hw->phy_type == e1000_phy_igp_2) {
ret_val = e1000_read_phy_reg(hw, IGP01E1000_PHY_LINK_HEALTH,
&phy_data);
@@ -6684,8 +6685,8 @@ e1000_set_d0_lplu_state(struct e1000_hw *hw,
} else {
-
- phy_data |= IGP02E1000_PM_D0_LPLU;
+
+ phy_data |= IGP02E1000_PM_D0_LPLU;
ret_val = e1000_write_phy_reg(hw, IGP02E1000_PHY_POWER_MGMT, phy_data);
if (ret_val)
return ret_val;
@@ -6777,7 +6778,7 @@ int32_t
e1000_host_if_read_cookie(struct e1000_hw * hw, uint8_t *buffer)
{
uint8_t i;
- uint32_t offset = E1000_MNG_DHCP_COOKIE_OFFSET;
+ uint32_t offset = E1000_MNG_DHCP_COOKIE_OFFSET;
uint8_t length = E1000_MNG_DHCP_COOKIE_LENGTH;
length = (length >> 2);
@@ -6796,7 +6797,7 @@ e1000_host_if_read_cookie(struct e1000_hw * hw, uint8_t *buffer)
* and also checks whether the previous command is completed.
* It busy waits in case of previous command is not completed.
*
- * returns: - E1000_ERR_HOST_INTERFACE_COMMAND in case if is not ready or
+ * returns: - E1000_ERR_HOST_INTERFACE_COMMAND in case if is not ready or
* timeout
* - E1000_SUCCESS for success.
****************************************************************************/
@@ -6820,7 +6821,7 @@ e1000_mng_enable_host_if(struct e1000_hw * hw)
msec_delay_irq(1);
}
- if (i == E1000_MNG_DHCP_COMMAND_TIMEOUT) {
+ if (i == E1000_MNG_DHCP_COMMAND_TIMEOUT) {
DEBUGOUT("Previous command timeout failed .\n");
return -E1000_ERR_HOST_INTERFACE_COMMAND;
}
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-13 07:44:54 +0000