diff options
Diffstat (limited to 'drivers/net/ibm_emac/ibm_emac_core.h')
-rw-r--r-- | drivers/net/ibm_emac/ibm_emac_core.h | 222 |
1 files changed, 0 insertions, 222 deletions
diff --git a/drivers/net/ibm_emac/ibm_emac_core.h b/drivers/net/ibm_emac/ibm_emac_core.h deleted file mode 100644 index dabb94afeb9..00000000000 --- a/drivers/net/ibm_emac/ibm_emac_core.h +++ /dev/null @@ -1,222 +0,0 @@ -/* - * drivers/net/ibm_emac/ibm_emac_core.h - * - * Driver for PowerPC 4xx on-chip ethernet controller. - * - * Copyright (c) 2004, 2005 Zultys Technologies. - * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net> - * - * Based on original work by - * Armin Kuster <akuster@mvista.com> - * Johnnie Peters <jpeters@mvista.com> - * Copyright 2000, 2001 MontaVista Softare Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - */ -#ifndef __IBM_EMAC_CORE_H_ -#define __IBM_EMAC_CORE_H_ - -#include <linux/netdevice.h> -#include <linux/dma-mapping.h> -#include <asm/ocp.h> - -#include "ibm_emac.h" -#include "ibm_emac_phy.h" -#include "ibm_emac_zmii.h" -#include "ibm_emac_rgmii.h" -#include "ibm_emac_mal.h" -#include "ibm_emac_tah.h" - -#define NUM_TX_BUFF CONFIG_IBM_EMAC_TXB -#define NUM_RX_BUFF CONFIG_IBM_EMAC_RXB - -/* Simple sanity check */ -#if NUM_TX_BUFF > 256 || NUM_RX_BUFF > 256 -#error Invalid number of buffer descriptors (greater than 256) -#endif - -// XXX -#define EMAC_MIN_MTU 46 -#define EMAC_MAX_MTU 9000 - -/* Maximum L2 header length (VLAN tagged, no FCS) */ -#define EMAC_MTU_OVERHEAD (6 * 2 + 2 + 4) - -/* RX BD size for the given MTU */ -static inline int emac_rx_size(int mtu) -{ - if (mtu > ETH_DATA_LEN) - return MAL_MAX_RX_SIZE; - else - return mal_rx_size(ETH_DATA_LEN + EMAC_MTU_OVERHEAD); -} - -#define EMAC_DMA_ALIGN(x) ALIGN((x), dma_get_cache_alignment()) - -#define EMAC_RX_SKB_HEADROOM \ - EMAC_DMA_ALIGN(CONFIG_IBM_EMAC_RX_SKB_HEADROOM) - -/* Size of RX skb for the given MTU */ -static inline int emac_rx_skb_size(int mtu) -{ - int size = max(mtu + EMAC_MTU_OVERHEAD, emac_rx_size(mtu)); - return EMAC_DMA_ALIGN(size + 2) + EMAC_RX_SKB_HEADROOM; -} - -/* RX DMA sync size */ -static inline int emac_rx_sync_size(int mtu) -{ - return EMAC_DMA_ALIGN(emac_rx_size(mtu) + 2); -} - -/* Driver statistcs is split into two parts to make it more cache friendly: - * - normal statistics (packet count, etc) - * - error statistics - * - * When statistics is requested by ethtool, these parts are concatenated, - * normal one goes first. - * - * Please, keep these structures in sync with emac_stats_keys. - */ - -/* Normal TX/RX Statistics */ -struct ibm_emac_stats { - u64 rx_packets; - u64 rx_bytes; - u64 tx_packets; - u64 tx_bytes; - u64 rx_packets_csum; - u64 tx_packets_csum; -}; - -/* Error statistics */ -struct ibm_emac_error_stats { - u64 tx_undo; - - /* Software RX Errors */ - u64 rx_dropped_stack; - u64 rx_dropped_oom; - u64 rx_dropped_error; - u64 rx_dropped_resize; - u64 rx_dropped_mtu; - u64 rx_stopped; - /* BD reported RX errors */ - u64 rx_bd_errors; - u64 rx_bd_overrun; - u64 rx_bd_bad_packet; - u64 rx_bd_runt_packet; - u64 rx_bd_short_event; - u64 rx_bd_alignment_error; - u64 rx_bd_bad_fcs; - u64 rx_bd_packet_too_long; - u64 rx_bd_out_of_range; - u64 rx_bd_in_range; - /* EMAC IRQ reported RX errors */ - u64 rx_parity; - u64 rx_fifo_overrun; - u64 rx_overrun; - u64 rx_bad_packet; - u64 rx_runt_packet; - u64 rx_short_event; - u64 rx_alignment_error; - u64 rx_bad_fcs; - u64 rx_packet_too_long; - u64 rx_out_of_range; - u64 rx_in_range; - - /* Software TX Errors */ - u64 tx_dropped; - /* BD reported TX errors */ - u64 tx_bd_errors; - u64 tx_bd_bad_fcs; - u64 tx_bd_carrier_loss; - u64 tx_bd_excessive_deferral; - u64 tx_bd_excessive_collisions; - u64 tx_bd_late_collision; - u64 tx_bd_multple_collisions; - u64 tx_bd_single_collision; - u64 tx_bd_underrun; - u64 tx_bd_sqe; - /* EMAC IRQ reported TX errors */ - u64 tx_parity; - u64 tx_underrun; - u64 tx_sqe; - u64 tx_errors; -}; - -#define EMAC_ETHTOOL_STATS_COUNT ((sizeof(struct ibm_emac_stats) + \ - sizeof(struct ibm_emac_error_stats)) \ - / sizeof(u64)) - -struct ocp_enet_private { - struct net_device *ndev; /* 0 */ - struct emac_regs __iomem *emacp; - - struct mal_descriptor *tx_desc; - int tx_cnt; - int tx_slot; - int ack_slot; - - struct mal_descriptor *rx_desc; - int rx_slot; - struct sk_buff *rx_sg_skb; /* 1 */ - int rx_skb_size; - int rx_sync_size; - - struct ibm_emac_stats stats; - struct ocp_device *tah_dev; - - struct ibm_ocp_mal *mal; - struct mal_commac commac; - - struct sk_buff *tx_skb[NUM_TX_BUFF]; - struct sk_buff *rx_skb[NUM_RX_BUFF]; - - struct ocp_device *zmii_dev; - int zmii_input; - struct ocp_enet_private *mdio_dev; - struct ocp_device *rgmii_dev; - int rgmii_input; - - struct ocp_def *def; - - struct mii_phy phy; - struct timer_list link_timer; - int reset_failed; - - int stop_timeout; /* in us */ - - struct ibm_emac_error_stats estats; - struct net_device_stats nstats; - - struct device* ldev; -}; - -/* Ethtool get_regs complex data. - * We want to get not just EMAC registers, but also MAL, ZMII, RGMII, TAH - * when available. - * - * Returned BLOB consists of the ibm_emac_ethtool_regs_hdr, - * MAL registers, EMAC registers and optional ZMII, RGMII, TAH registers. - * Each register component is preceded with emac_ethtool_regs_subhdr. - * Order of the optional headers follows their relative bit posititions - * in emac_ethtool_regs_hdr.components - */ -#define EMAC_ETHTOOL_REGS_ZMII 0x00000001 -#define EMAC_ETHTOOL_REGS_RGMII 0x00000002 -#define EMAC_ETHTOOL_REGS_TAH 0x00000004 - -struct emac_ethtool_regs_hdr { - u32 components; -}; - -struct emac_ethtool_regs_subhdr { - u32 version; - u32 index; -}; - -#endif /* __IBM_EMAC_CORE_H_ */ |