diff options
Diffstat (limited to 'drivers/net')
-rw-r--r-- | drivers/net/b44.c | 64 | ||||
-rw-r--r-- | drivers/net/bnx2.c | 2 | ||||
-rw-r--r-- | drivers/net/hydra.h | 177 | ||||
-rw-r--r-- | drivers/net/ixgb/ixgb_main.c | 13 | ||||
-rw-r--r-- | drivers/net/mv643xx_eth.c | 19 | ||||
-rw-r--r-- | drivers/net/natsemi.c | 2 | ||||
-rw-r--r-- | drivers/net/pcmcia/axnet_cs.c | 2 | ||||
-rw-r--r-- | drivers/net/skge.c | 2 | ||||
-rw-r--r-- | drivers/net/sky2.c | 6 | ||||
-rw-r--r-- | drivers/net/sky2.h | 2 | ||||
-rw-r--r-- | drivers/net/starfire.c | 2 | ||||
-rw-r--r-- | drivers/net/typhoon.c | 2 | ||||
-rw-r--r-- | drivers/net/via-rhine.c | 7 |
13 files changed, 67 insertions, 233 deletions
diff --git a/drivers/net/b44.c b/drivers/net/b44.c index c4e12b5cbb9..3d306681919 100644 --- a/drivers/net/b44.c +++ b/drivers/net/b44.c @@ -2,6 +2,7 @@ * * Copyright (C) 2002 David S. Miller (davem@redhat.com) * Fixed by Pekka Pietikainen (pp@ee.oulu.fi) + * Copyright (C) 2006 Broadcom Corporation. * * Distribute under GPL. */ @@ -28,8 +29,8 @@ #define DRV_MODULE_NAME "b44" #define PFX DRV_MODULE_NAME ": " -#define DRV_MODULE_VERSION "0.97" -#define DRV_MODULE_RELDATE "Nov 30, 2005" +#define DRV_MODULE_VERSION "1.00" +#define DRV_MODULE_RELDATE "Apr 7, 2006" #define B44_DEF_MSG_ENABLE \ (NETIF_MSG_DRV | \ @@ -136,7 +137,7 @@ static inline unsigned long br32(const struct b44 *bp, unsigned long reg) return readl(bp->regs + reg); } -static inline void bw32(const struct b44 *bp, +static inline void bw32(const struct b44 *bp, unsigned long reg, unsigned long val) { writel(val, bp->regs + reg); @@ -286,13 +287,13 @@ static void __b44_cam_write(struct b44 *bp, unsigned char *data, int index) val |= ((u32) data[4]) << 8; val |= ((u32) data[5]) << 0; bw32(bp, B44_CAM_DATA_LO, val); - val = (CAM_DATA_HI_VALID | + val = (CAM_DATA_HI_VALID | (((u32) data[0]) << 8) | (((u32) data[1]) << 0)); bw32(bp, B44_CAM_DATA_HI, val); bw32(bp, B44_CAM_CTRL, (CAM_CTRL_WRITE | (index << CAM_CTRL_INDEX_SHIFT))); - b44_wait_bit(bp, B44_CAM_CTRL, CAM_CTRL_BUSY, 100, 1); + b44_wait_bit(bp, B44_CAM_CTRL, CAM_CTRL_BUSY, 100, 1); } static inline void __b44_disable_ints(struct b44 *bp) @@ -410,25 +411,18 @@ static void __b44_set_flow_ctrl(struct b44 *bp, u32 pause_flags) static void b44_set_flow_ctrl(struct b44 *bp, u32 local, u32 remote) { - u32 pause_enab = bp->flags & (B44_FLAG_TX_PAUSE | - B44_FLAG_RX_PAUSE); + u32 pause_enab = 0; - if (local & ADVERTISE_PAUSE_CAP) { - if (local & ADVERTISE_PAUSE_ASYM) { - if (remote & LPA_PAUSE_CAP) - pause_enab |= (B44_FLAG_TX_PAUSE | - B44_FLAG_RX_PAUSE); - else if (remote & LPA_PAUSE_ASYM) - pause_enab |= B44_FLAG_RX_PAUSE; - } else { - if (remote & LPA_PAUSE_CAP) - pause_enab |= (B44_FLAG_TX_PAUSE | - B44_FLAG_RX_PAUSE); - } - } else if (local & ADVERTISE_PAUSE_ASYM) { - if ((remote & LPA_PAUSE_CAP) && - (remote & LPA_PAUSE_ASYM)) - pause_enab |= B44_FLAG_TX_PAUSE; + /* The driver supports only rx pause by default because + the b44 mac tx pause mechanism generates excessive + pause frames. + Use ethtool to turn on b44 tx pause if necessary. + */ + if ((local & ADVERTISE_PAUSE_CAP) && + (local & ADVERTISE_PAUSE_ASYM)){ + if ((remote & LPA_PAUSE_ASYM) && + !(remote & LPA_PAUSE_CAP)) + pause_enab |= B44_FLAG_RX_PAUSE; } __b44_set_flow_ctrl(bp, pause_enab); @@ -1063,7 +1057,7 @@ static int b44_change_mtu(struct net_device *dev, int new_mtu) spin_unlock_irq(&bp->lock); b44_enable_ints(bp); - + return 0; } @@ -1381,7 +1375,7 @@ static void b44_init_hw(struct b44 *bp) bw32(bp, B44_DMARX_ADDR, bp->rx_ring_dma + bp->dma_offset); bw32(bp, B44_DMARX_PTR, bp->rx_pending); - bp->rx_prod = bp->rx_pending; + bp->rx_prod = bp->rx_pending; bw32(bp, B44_MIB_CTRL, MIB_CTRL_CLR_ON_READ); @@ -1553,9 +1547,9 @@ static void __b44_set_rx_mode(struct net_device *dev) val |= RXCONFIG_ALLMULTI; else i = __b44_load_mcast(bp, dev); - + for (; i < 64; i++) { - __b44_cam_write(bp, zero, i); + __b44_cam_write(bp, zero, i); } bw32(bp, B44_RXCONFIG, val); val = br32(bp, B44_CAM_CTRL); @@ -1737,7 +1731,7 @@ static int b44_set_ringparam(struct net_device *dev, spin_unlock_irq(&bp->lock); b44_enable_ints(bp); - + return 0; } @@ -1782,7 +1776,7 @@ static int b44_set_pauseparam(struct net_device *dev, spin_unlock_irq(&bp->lock); b44_enable_ints(bp); - + return 0; } @@ -1898,7 +1892,7 @@ static int __devinit b44_get_invariants(struct b44 *bp) bp->core_unit = ssb_core_unit(bp); bp->dma_offset = SB_PCI_DMA; - /* XXX - really required? + /* XXX - really required? bp->flags |= B44_FLAG_BUGGY_TXPTR; */ out: @@ -1946,7 +1940,7 @@ static int __devinit b44_init_one(struct pci_dev *pdev, "aborting.\n"); goto err_out_free_res; } - + err = pci_set_consistent_dma_mask(pdev, (u64) B44_DMA_MASK); if (err) { printk(KERN_ERR PFX "No usable DMA configuration, " @@ -2041,9 +2035,9 @@ static int __devinit b44_init_one(struct pci_dev *pdev, pci_save_state(bp->pdev); - /* Chip reset provides power to the b44 MAC & PCI cores, which + /* Chip reset provides power to the b44 MAC & PCI cores, which * is necessary for MAC register access. - */ + */ b44_chip_reset(bp); printk(KERN_INFO "%s: Broadcom 4400 10/100BaseT Ethernet ", dev->name); @@ -2091,10 +2085,10 @@ static int b44_suspend(struct pci_dev *pdev, pm_message_t state) del_timer_sync(&bp->timer); - spin_lock_irq(&bp->lock); + spin_lock_irq(&bp->lock); b44_halt(bp); - netif_carrier_off(bp->dev); + netif_carrier_off(bp->dev); netif_device_detach(bp->dev); b44_free_rings(bp); diff --git a/drivers/net/bnx2.c b/drivers/net/bnx2.c index 2671da20a49..5ca99e26660 100644 --- a/drivers/net/bnx2.c +++ b/drivers/net/bnx2.c @@ -63,7 +63,7 @@ /* Time in jiffies before concluding the transmitter is hung. */ #define TX_TIMEOUT (5*HZ) -static char version[] __devinitdata = +static const char version[] __devinitdata = "Broadcom NetXtreme II Gigabit Ethernet Driver " DRV_MODULE_NAME " v" DRV_MODULE_VERSION " (" DRV_MODULE_RELDATE ")\n"; MODULE_AUTHOR("Michael Chan <mchan@broadcom.com>"); diff --git a/drivers/net/hydra.h b/drivers/net/hydra.h deleted file mode 100644 index 37414146258..00000000000 --- a/drivers/net/hydra.h +++ /dev/null @@ -1,177 +0,0 @@ -/* $Linux: hydra.h,v 1.0 1994/10/26 02:03:47 cgd Exp $ */ - -/* - * Copyright (c) 1994 Timo Rossi - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. All advertising materials mentioning features or use of this software - * must display the following acknowledgement: - * This product includes software developed by Timo Rossi - * 4. The name of the author may not be used to endorse or promote products - * derived from this software without specific prior written permission - * - * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR - * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES - * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. - * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -/* - * The Hydra Systems card uses the National Semiconductor - * 8390 NIC (Network Interface Controller) chip, located - * at card base address + 0xffe1. NIC registers are accessible - * only at odd byte addresses, so the register offsets must - * be multiplied by two. - * - * Card address PROM is located at card base + 0xffc0 (even byte addresses) - * - * RAM starts at the card base address, and is 16K or 64K. - * The current Amiga NetBSD hydra driver is hardwired for 16K. - * It seems that the RAM should be accessed as words or longwords only. - * - */ - -/* adapted for Linux by Topi Kanerva 03/29/95 - with original author's permission */ - -#define HYDRA_NIC_BASE 0xffe1 - -/* Page0 registers */ - -#define NIC_CR 0 /* Command register */ -#define NIC_PSTART (1*2) /* Page start (write) */ -#define NIC_PSTOP (2*2) /* Page stop (write) */ -#define NIC_BNDRY (3*2) /* Boundary pointer */ -#define NIC_TSR (4*2) /* Transmit status (read) */ -#define NIC_TPSR (4*2) /* Transmit page start (write) */ -#define NIC_NCR (5*2) /* Number of collisions, read */ -#define NIC_TBCR0 (5*2) /* Transmit byte count low (write) */ -#define NIC_FIFO (6*2) /* FIFO reg. (read) */ -#define NIC_TBCR1 (6*2) /* Transmit byte count high (write) */ -#define NIC_ISR (7*2) /* Interrupt status register */ -#define NIC_RBCR0 (0xa*2) /* Remote byte count low (write) */ -#define NIC_RBCR1 (0xb*2) /* Remote byte count high (write) */ -#define NIC_RSR (0xc*2) /* Receive status (read) */ -#define NIC_RCR (0xc*2) /* Receive config (write) */ -#define NIC_CNTR0 (0xd*2) /* Frame alignment error count (read) */ -#define NIC_TCR (0xd*2) /* Transmit config (write) */ -#define NIC_CNTR1 (0xe*2) /* CRC error counter (read) */ -#define NIC_DCR (0xe*2) /* Data config (write) */ -#define NIC_CNTR2 (0xf*2) /* missed packet counter (read) */ -#define NIC_IMR (0xf*2) /* Interrupt mask reg. (write) */ - -/* Page1 registers */ - -#define NIC_PAR0 (1*2) /* Physical address */ -#define NIC_PAR1 (2*2) -#define NIC_PAR2 (3*2) -#define NIC_PAR3 (4*2) -#define NIC_PAR4 (5*2) -#define NIC_PAR5 (6*2) -#define NIC_CURR (7*2) /* Current RX ring-buffer page */ -#define NIC_MAR0 (8*2) /* Multicast address */ -#define NIC_MAR1 (9*2) -#define NIC_MAR2 (0xa*2) -#define NIC_MAR3 (0xb*2) -#define NIC_MAR4 (0xc*2) -#define NIC_MAR5 (0xd*2) -#define NIC_MAR6 (0xe*2) -#define NIC_MAR7 (0xf*2) - -/* Command register definitions */ - -#define CR_STOP 0x01 /* Stop -- software reset command */ -#define CR_START 0x02 /* Start */ -#define CR_TXP 0x04 /* Transmit packet */ - -#define CR_RD0 0x08 /* Remote DMA cmd */ -#define CR_RD1 0x10 -#define CR_RD2 0x20 - -#define CR_NODMA CR_RD2 - -#define CR_PS0 0x40 /* Page select */ -#define CR_PS1 0x80 - -#define CR_PAGE0 0 -#define CR_PAGE1 CR_PS0 -#define CR_PAGE2 CR_PS1 - -/* Interrupt status reg. definitions */ - -#define ISR_PRX 0x01 /* Packet received without errors */ -#define ISR_PTX 0x02 /* Packet transmitted without errors */ -#define ISR_RXE 0x04 /* Receive error */ -#define ISR_TXE 0x08 /* Transmit error */ -#define ISR_OVW 0x10 /* Ring buffer overrun */ -#define ISR_CNT 0x20 /* Counter overflow */ -#define ISR_RDC 0x40 /* Remote DMA compile */ -#define ISR_RST 0x80 /* Reset status */ - -/* Data config reg. definitions */ - -#define DCR_WTS 0x01 /* Word transfer select */ -#define DCR_BOS 0x02 /* Byte order select */ -#define DCR_LAS 0x04 /* Long address select */ -#define DCR_LS 0x08 /* Loopback select */ -#define DCR_AR 0x10 /* Auto-init remote */ -#define DCR_FT0 0x20 /* FIFO threshold select */ -#define DCR_FT1 0x40 - -/* Transmit config reg. definitions */ - -#define TCR_CRC 0x01 /* Inhibit CRC */ -#define TCR_LB0 0x02 /* Loopback control */ -#define TCR_LB1 0x04 -#define TCR_ATD 0x08 /* Auto transmit disable */ -#define TCR_OFST 0x10 /* Collision offset enable */ - -/* Transmit status reg. definitions */ - -#define TSR_PTX 0x01 /* Packet transmitted */ -#define TSR_COL 0x04 /* Transmit collided */ -#define TSR_ABT 0x08 /* Transmit aborted */ -#define TSR_CRS 0x10 /* Carrier sense lost */ -#define TSR_FU 0x20 /* FIFO underrun */ -#define TSR_CDH 0x40 /* CD Heartbeat */ -#define TSR_OWC 0x80 /* Out of Window Collision */ - -/* Receiver config register definitions */ - -#define RCR_SEP 0x01 /* Save errored packets */ -#define RCR_AR 0x02 /* Accept runt packets */ -#define RCR_AB 0x04 /* Accept broadcast */ -#define RCR_AM 0x08 /* Accept multicast */ -#define RCR_PRO 0x10 /* Promiscuous mode */ -#define RCR_MON 0x20 /* Monitor mode */ - -/* Receiver status register definitions */ - -#define RSR_PRX 0x01 /* Packet received without error */ -#define RSR_CRC 0x02 /* CRC error */ -#define RSR_FAE 0x04 /* Frame alignment error */ -#define RSR_FO 0x08 /* FIFO overrun */ -#define RSR_MPA 0x10 /* Missed packet */ -#define RSR_PHY 0x20 /* Physical address */ -#define RSR_DIS 0x40 /* Received disabled */ -#define RSR_DFR 0x80 /* Deferring (jabber) */ - -/* Hydra System card address PROM offset */ - -#define HYDRA_ADDRPROM 0xffc0 - - diff --git a/drivers/net/ixgb/ixgb_main.c b/drivers/net/ixgb/ixgb_main.c index f9f77e4f596..cfd67d812f0 100644 --- a/drivers/net/ixgb/ixgb_main.c +++ b/drivers/net/ixgb/ixgb_main.c @@ -357,18 +357,20 @@ ixgb_probe(struct pci_dev *pdev, if((err = pci_enable_device(pdev))) return err; - if(!(err = pci_set_dma_mask(pdev, DMA_64BIT_MASK))) { + if(!(err = pci_set_dma_mask(pdev, DMA_64BIT_MASK)) && + !(err = pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK))) { pci_using_dac = 1; } else { - if((err = pci_set_dma_mask(pdev, DMA_32BIT_MASK))) { + if((err = pci_set_dma_mask(pdev, DMA_32BIT_MASK)) || + (err = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK))) { IXGB_ERR("No usable DMA configuration, aborting\n"); - return err; + goto err_dma_mask; } pci_using_dac = 0; } if((err = pci_request_regions(pdev, ixgb_driver_name))) - return err; + goto err_request_regions; pci_set_master(pdev); @@ -502,6 +504,9 @@ err_ioremap: free_netdev(netdev); err_alloc_etherdev: pci_release_regions(pdev); +err_request_regions: +err_dma_mask: + pci_disable_device(pdev); return err; } diff --git a/drivers/net/mv643xx_eth.c b/drivers/net/mv643xx_eth.c index 9f2661355a4..ea62a3e7d58 100644 --- a/drivers/net/mv643xx_eth.c +++ b/drivers/net/mv643xx_eth.c @@ -281,10 +281,16 @@ static void mv643xx_eth_tx_timeout_task(struct net_device *dev) { struct mv643xx_private *mp = netdev_priv(dev); - netif_device_detach(dev); + if (!netif_running(dev)) + return; + + netif_stop_queue(dev); + eth_port_reset(mp->port_num); eth_port_start(dev); - netif_device_attach(dev); + + if (mp->tx_ring_size - mp->tx_desc_count >= MAX_DESCS_PER_SKB) + netif_wake_queue(dev); } /** @@ -552,9 +558,9 @@ static irqreturn_t mv643xx_eth_int_handler(int irq, void *dev_id, #else if (eth_int_cause & ETH_INT_CAUSE_RX) mv643xx_eth_receive_queue(dev, INT_MAX); +#endif if (eth_int_cause_ext & ETH_INT_CAUSE_TX) mv643xx_eth_free_completed_tx_descs(dev); -#endif /* * If no real interrupt occured, exit. @@ -1186,7 +1192,12 @@ static int mv643xx_eth_start_xmit(struct sk_buff *skb, struct net_device *dev) BUG_ON(netif_queue_stopped(dev)); BUG_ON(skb == NULL); - BUG_ON(mp->tx_ring_size - mp->tx_desc_count < MAX_DESCS_PER_SKB); + + if (mp->tx_ring_size - mp->tx_desc_count < MAX_DESCS_PER_SKB) { + printk(KERN_ERR "%s: transmit with queue full\n", dev->name); + netif_stop_queue(dev); + return 1; + } if (has_tiny_unaligned_frags(skb)) { if ((skb_linearize(skb, GFP_ATOMIC) != 0)) { diff --git a/drivers/net/natsemi.c b/drivers/net/natsemi.c index 7826afbb9db..90627756d6f 100644 --- a/drivers/net/natsemi.c +++ b/drivers/net/natsemi.c @@ -238,7 +238,7 @@ static int full_duplex[MAX_UNITS]; #define NATSEMI_RX_LIMIT 2046 /* maximum supported by hardware */ /* These identify the driver base version and may not be removed. */ -static char version[] __devinitdata = +static const char version[] __devinitdata = KERN_INFO DRV_NAME " dp8381x driver, version " DRV_VERSION ", " DRV_RELDATE "\n" KERN_INFO " originally by Donald Becker <becker@scyld.com>\n" diff --git a/drivers/net/pcmcia/axnet_cs.c b/drivers/net/pcmcia/axnet_cs.c index 56233afcb2b..448a0948852 100644 --- a/drivers/net/pcmcia/axnet_cs.c +++ b/drivers/net/pcmcia/axnet_cs.c @@ -1560,7 +1560,7 @@ static void ei_receive(struct net_device *dev) static void ei_rx_overrun(struct net_device *dev) { - axnet_dev_t *info = (axnet_dev_t *)dev; + axnet_dev_t *info = PRIV(dev); long e8390_base = dev->base_addr; unsigned char was_txing, must_resend = 0; struct ei_device *ei_local = (struct ei_device *) netdev_priv(dev); diff --git a/drivers/net/skge.c b/drivers/net/skge.c index 35dbf05c7f0..a70c2b0cc10 100644 --- a/drivers/net/skge.c +++ b/drivers/net/skge.c @@ -78,6 +78,8 @@ static const struct pci_device_id skge_id_table[] = { { PCI_DEVICE(PCI_VENDOR_ID_SYSKONNECT, PCI_DEVICE_ID_SYSKONNECT_GE) }, { PCI_DEVICE(PCI_VENDOR_ID_SYSKONNECT, PCI_DEVICE_ID_SYSKONNECT_YU) }, { PCI_DEVICE(PCI_VENDOR_ID_DLINK, PCI_DEVICE_ID_DLINK_DGE510T), }, + { PCI_DEVICE(PCI_VENDOR_ID_DLINK, 0x4b00) }, + { PCI_DEVICE(PCI_VENDOR_ID_DLINK, 0x4b01) }, { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4320) }, { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x5005) }, /* Belkin */ { PCI_DEVICE(PCI_VENDOR_ID_CNET, PCI_DEVICE_ID_CNET_GIGACARD) }, diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c index 68f9c206a62..67b0eab1658 100644 --- a/drivers/net/sky2.c +++ b/drivers/net/sky2.c @@ -99,8 +99,6 @@ MODULE_PARM_DESC(disable_msi, "Disable Message Signaled Interrupt (MSI)"); static const struct pci_device_id sky2_id_table[] = { { PCI_DEVICE(PCI_VENDOR_ID_SYSKONNECT, 0x9000) }, { PCI_DEVICE(PCI_VENDOR_ID_SYSKONNECT, 0x9E00) }, - { PCI_DEVICE(PCI_VENDOR_ID_DLINK, 0x4b00) }, - { PCI_DEVICE(PCI_VENDOR_ID_DLINK, 0x4b01) }, { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4340) }, { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4341) }, { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4342) }, @@ -579,8 +577,8 @@ static void sky2_mac_init(struct sky2_hw *hw, unsigned port) reg = gma_read16(hw, port, GM_PHY_ADDR); gma_write16(hw, port, GM_PHY_ADDR, reg | GM_PAR_MIB_CLR); - for (i = 0; i < GM_MIB_CNT_SIZE; i++) - gma_read16(hw, port, GM_MIB_CNT_BASE + 8 * i); + for (i = GM_MIB_CNT_BASE; i <= GM_MIB_CNT_END; i += 4) + gma_read16(hw, port, i); gma_write16(hw, port, GM_PHY_ADDR, reg); /* transmit control */ diff --git a/drivers/net/sky2.h b/drivers/net/sky2.h index 62532b4e45c..89dd18cd12f 100644 --- a/drivers/net/sky2.h +++ b/drivers/net/sky2.h @@ -1375,7 +1375,7 @@ enum { GM_PHY_ADDR = 0x0088, /* 16 bit r/w GPHY Address Register */ /* MIB Counters */ GM_MIB_CNT_BASE = 0x0100, /* Base Address of MIB Counters */ - GM_MIB_CNT_SIZE = 256, + GM_MIB_CNT_END = 0x025C, /* Last MIB counter */ }; diff --git a/drivers/net/starfire.c b/drivers/net/starfire.c index 45ad036733e..9b7805be21d 100644 --- a/drivers/net/starfire.c +++ b/drivers/net/starfire.c @@ -335,7 +335,7 @@ do { \ /* These identify the driver base version and may not be removed. */ -static char version[] __devinitdata = +static const char version[] __devinitdata = KERN_INFO "starfire.c:v1.03 7/26/2000 Written by Donald Becker <becker@scyld.com>\n" KERN_INFO " (unofficial 2.2/2.4 kernel port, version " DRV_VERSION ", " DRV_RELDATE ")\n"; diff --git a/drivers/net/typhoon.c b/drivers/net/typhoon.c index c1ce87a5f8d..d9258d42090 100644 --- a/drivers/net/typhoon.c +++ b/drivers/net/typhoon.c @@ -134,7 +134,7 @@ static const int multicast_filter_limit = 32; #include "typhoon.h" #include "typhoon-firmware.h" -static char version[] __devinitdata = +static const char version[] __devinitdata = "typhoon.c: version " DRV_MODULE_VERSION " (" DRV_MODULE_RELDATE ")\n"; MODULE_AUTHOR("David Dillow <dave@thedillows.org>"); diff --git a/drivers/net/via-rhine.c b/drivers/net/via-rhine.c index a9b2150909d..6a23964c131 100644 --- a/drivers/net/via-rhine.c +++ b/drivers/net/via-rhine.c @@ -469,7 +469,7 @@ struct rhine_private { struct sk_buff *tx_skbuff[TX_RING_SIZE]; dma_addr_t tx_skbuff_dma[TX_RING_SIZE]; - /* Tx bounce buffers */ + /* Tx bounce buffers (Rhine-I only) */ unsigned char *tx_buf[TX_RING_SIZE]; unsigned char *tx_bufs; dma_addr_t tx_bufs_dma; @@ -1043,7 +1043,8 @@ static void alloc_tbufs(struct net_device* dev) rp->tx_ring[i].desc_length = cpu_to_le32(TXDESC); next += sizeof(struct tx_desc); rp->tx_ring[i].next_desc = cpu_to_le32(next); - rp->tx_buf[i] = &rp->tx_bufs[i * PKT_BUF_SZ]; + if (rp->quirks & rqRhineI) + rp->tx_buf[i] = &rp->tx_bufs[i * PKT_BUF_SZ]; } rp->tx_ring[i-1].next_desc = cpu_to_le32(rp->tx_ring_dma); @@ -1091,7 +1092,7 @@ static void rhine_check_media(struct net_device *dev, unsigned int init_media) } /* Called after status of force_media possibly changed */ -void rhine_set_carrier(struct mii_if_info *mii) +static void rhine_set_carrier(struct mii_if_info *mii) { if (mii->force_media) { /* autoneg is off: Link is always assumed to be up */ |