aboutsummaryrefslogtreecommitdiff
path: root/drivers/net
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net')
-rw-r--r--drivers/net/82596.c2
-rw-r--r--drivers/net/amd8111e.c7
-rw-r--r--drivers/net/appletalk/cops.c2
-rw-r--r--drivers/net/ariadne.h2
-rw-r--r--drivers/net/atl1c/atl1c_main.c2
-rw-r--r--drivers/net/benet/be_cmds.h2
-rw-r--r--drivers/net/benet/be_main.c2
-rw-r--r--drivers/net/bnx2x_reg.h2
-rw-r--r--drivers/net/bonding/bond_alb.c2
-rw-r--r--drivers/net/cxgb3/sge.c2
-rw-r--r--drivers/net/ehea/ehea_ethtool.c4
-rw-r--r--drivers/net/hamradio/baycom_ser_fdx.c2
-rw-r--r--drivers/net/irda/smsc-ircc2.c2
-rw-r--r--drivers/net/iseries_veth.c2
-rw-r--r--drivers/net/lasi_82596.c2
-rw-r--r--drivers/net/lib82596.c2
-rw-r--r--drivers/net/mlx4/en_rx.c2
-rw-r--r--drivers/net/mlx4/en_tx.c2
-rw-r--r--drivers/net/mlx4/mlx4_en.h2
-rw-r--r--drivers/net/ps3_gelic_net.c2
-rw-r--r--drivers/net/ps3_gelic_wireless.h2
-rw-r--r--drivers/net/qla3xxx.c2
-rw-r--r--drivers/net/s2io.c2
-rw-r--r--drivers/net/sis900.c4
-rw-r--r--drivers/net/skfp/h/smc.h8
-rw-r--r--drivers/net/skfp/skfddi.c2
-rw-r--r--drivers/net/sky2.c2
-rw-r--r--drivers/net/smsc911x.c2
-rw-r--r--drivers/net/smsc911x.h2
-rw-r--r--drivers/net/spider_net.c2
-rw-r--r--drivers/net/stmmac/gmac.c2
-rw-r--r--drivers/net/stmmac/gmac.h4
-rw-r--r--drivers/net/tokenring/ibmtr.c2
-rw-r--r--drivers/net/tokenring/smctr.c2
-rw-r--r--drivers/net/ucc_geth.c2
-rw-r--r--drivers/net/ucc_geth.h20
-rw-r--r--drivers/net/usb/smsc95xx.c2
-rw-r--r--drivers/net/wan/hdlc_fr.c2
-rw-r--r--drivers/net/wan/lmc/lmc_main.c2
-rw-r--r--drivers/net/wimax/i2400m/rx.c2
-rw-r--r--drivers/net/wireless/ath/ath5k/base.h4
-rw-r--r--drivers/net/wireless/ath/ath5k/eeprom.c2
-rw-r--r--drivers/net/wireless/ath/ath5k/phy.c6
-rw-r--r--drivers/net/wireless/ath/ath9k/rc.c2
-rw-r--r--drivers/net/wireless/b43/main.c2
-rw-r--r--drivers/net/wireless/b43legacy/main.c2
-rw-r--r--drivers/net/wireless/ipw2x00/ipw2100.c6
-rw-r--r--drivers/net/wireless/ipw2x00/ipw2200.c8
-rw-r--r--drivers/net/wireless/ipw2x00/libipw_module.c2
-rw-r--r--drivers/net/wireless/iwmc3200wifi/hal.c2
-rw-r--r--drivers/net/wireless/iwmc3200wifi/rx.c2
-rw-r--r--drivers/net/wireless/libertas/if_sdio.c2
-rw-r--r--drivers/net/wireless/orinoco/hermes_dld.c4
-rw-r--r--drivers/net/wireless/prism54/isl_ioctl.c4
-rw-r--r--drivers/net/wireless/rt2x00/rt2400pci.h2
-rw-r--r--drivers/net/wireless/rt2x00/rt2500pci.h2
-rw-r--r--drivers/net/wireless/rt2x00/rt2500usb.h2
-rw-r--r--drivers/net/wireless/rt2x00/rt61pci.h2
-rw-r--r--drivers/net/wireless/rt2x00/rt73usb.h2
-rw-r--r--drivers/net/wireless/zd1211rw/zd_mac.c2
60 files changed, 90 insertions, 85 deletions
diff --git a/drivers/net/82596.c b/drivers/net/82596.c
index ea6b139b812..1663bc9e45d 100644
--- a/drivers/net/82596.c
+++ b/drivers/net/82596.c
@@ -19,7 +19,7 @@
TBD:
* look at deferring rx frames rather than discarding (as per tulip)
* handle tx ring full as per tulip
- * performace test to tune rx_copybreak
+ * performance test to tune rx_copybreak
Most of my modifications relate to the braindead big-endian
implementation by Intel. When the i596 is operating in
diff --git a/drivers/net/amd8111e.c b/drivers/net/amd8111e.c
index 4e6359fff0e..766aabfdfc7 100644
--- a/drivers/net/amd8111e.c
+++ b/drivers/net/amd8111e.c
@@ -1633,8 +1633,13 @@ static int amd8111e_enable_link_change(struct amd8111e_priv* lp)
readl(lp->mmio + CMD7);
return 0;
}
-/* This function is called when a packet transmission fails to complete within a resonable period, on the assumption that an interrupts have been failed or the interface is locked up. This function will reinitialize the hardware */
+/*
+ * This function is called when a packet transmission fails to complete
+ * within a reasonable period, on the assumption that an interrupt have
+ * failed or the interface is locked up. This function will reinitialize
+ * the hardware.
+ */
static void amd8111e_tx_timeout(struct net_device *dev)
{
struct amd8111e_priv* lp = netdev_priv(dev);
diff --git a/drivers/net/appletalk/cops.c b/drivers/net/appletalk/cops.c
index 50cecf41747..73b38c204eb 100644
--- a/drivers/net/appletalk/cops.c
+++ b/drivers/net/appletalk/cops.c
@@ -120,7 +120,7 @@ static int irq = 5; /* Default IRQ */
* DAYNA driver mode:
* Dayna DL2000/DaynaTalk PC (Half Length), COPS LT-95,
* Farallon PhoneNET PC III, Farallon PhoneNET PC II
- * Other cards possibly supported mode unkown though:
+ * Other cards possibly supported mode unknown though:
* Dayna DL2000 (Full length), COPS LT/M (Micro-Channel)
*
* Cards NOT supported by this driver but supported by the ltpc.c
diff --git a/drivers/net/ariadne.h b/drivers/net/ariadne.h
index bb613f292e0..727be5cdd1e 100644
--- a/drivers/net/ariadne.h
+++ b/drivers/net/ariadne.h
@@ -244,7 +244,7 @@ struct Am79C960 {
#define DLNKTST 0x0010 /* Disable Link Status */
#define DAPC 0x0008 /* Disable Automatic Polarity Correction */
#define MENDECL 0x0004 /* MENDEC Loopback Mode */
-#define LRTTSEL 0x0002 /* Low Receive Treshold/Transmit Mode Select */
+#define LRTTSEL 0x0002 /* Low Receive Threshold/Transmit Mode Select */
#define PORTSEL1 0x0001 /* Port Select Bits */
#define PORTSEL2 0x8000 /* Port Select Bits */
#define INTL 0x4000 /* Internal Loopback */
diff --git a/drivers/net/atl1c/atl1c_main.c b/drivers/net/atl1c/atl1c_main.c
index 1e2f57d4c36..6eb9241cee0 100644
--- a/drivers/net/atl1c/atl1c_main.c
+++ b/drivers/net/atl1c/atl1c_main.c
@@ -1540,7 +1540,7 @@ static irqreturn_t atl1c_intr(int irq, void *data)
if (status & ISR_OVER)
if (netif_msg_intr(adapter))
dev_warn(&pdev->dev,
- "TX/RX over flow (status = 0x%x)\n",
+ "TX/RX overflow (status = 0x%x)\n",
status & ISR_OVER);
/* link event */
diff --git a/drivers/net/benet/be_cmds.h b/drivers/net/benet/be_cmds.h
index e7323be507d..92b87ef156e 100644
--- a/drivers/net/benet/be_cmds.h
+++ b/drivers/net/benet/be_cmds.h
@@ -444,7 +444,7 @@ enum be_if_flags {
* filtering capabilities. */
struct be_cmd_req_if_create {
struct be_cmd_req_hdr hdr;
- u32 version; /* ignore currntly */
+ u32 version; /* ignore currently */
u32 capability_flags;
u32 enable_flags;
u8 mac_addr[ETH_ALEN];
diff --git a/drivers/net/benet/be_main.c b/drivers/net/benet/be_main.c
index 957a0f7f276..24c7d9900ba 100644
--- a/drivers/net/benet/be_main.c
+++ b/drivers/net/benet/be_main.c
@@ -1982,7 +1982,7 @@ int be_load_fw(struct be_adapter *adapter, u8 *func)
goto fw_exit;
}
- dev_info(&adapter->pdev->dev, "Firmware flashed succesfully\n");
+ dev_info(&adapter->pdev->dev, "Firmware flashed successfully\n");
fw_exit:
release_firmware(fw);
diff --git a/drivers/net/bnx2x_reg.h b/drivers/net/bnx2x_reg.h
index b668173ffcb..944964e78c8 100644
--- a/drivers/net/bnx2x_reg.h
+++ b/drivers/net/bnx2x_reg.h
@@ -2536,7 +2536,7 @@
/* [RC 1] A flag to indicate that overflow error occurred in one of the
queues. */
#define QM_REG_OVFERROR 0x16805c
-/* [RC 7] the Q were the qverflow occurs */
+/* [RC 7] the Q where the overflow occurs */
#define QM_REG_OVFQNUM 0x168058
/* [R 16] Pause state for physical queues 15-0 */
#define QM_REG_PAUSESTATE0 0x168410
diff --git a/drivers/net/bonding/bond_alb.c b/drivers/net/bonding/bond_alb.c
index 0d30d1e5e53..00ab51ef312 100644
--- a/drivers/net/bonding/bond_alb.c
+++ b/drivers/net/bonding/bond_alb.c
@@ -556,7 +556,7 @@ static void rlb_update_rx_clients(struct bonding *bond)
}
}
- /* do not update the entries again untill this counter is zero so that
+ /* do not update the entries again until this counter is zero so that
* not to confuse the clients.
*/
bond_info->rlb_update_delay_counter = RLB_UPDATE_DELAY;
diff --git a/drivers/net/cxgb3/sge.c b/drivers/net/cxgb3/sge.c
index 49f3de79118..bdbd14727e4 100644
--- a/drivers/net/cxgb3/sge.c
+++ b/drivers/net/cxgb3/sge.c
@@ -1285,7 +1285,7 @@ netdev_tx_t t3_eth_xmit(struct sk_buff *skb, struct net_device *dev)
/*
* We do not use Tx completion interrupts to free DMAd Tx packets.
- * This is good for performamce but means that we rely on new Tx
+ * This is good for performance but means that we rely on new Tx
* packets arriving to run the destructors of completed packets,
* which open up space in their sockets' send queues. Sometimes
* we do not get such new packets causing Tx to stall. A single
diff --git a/drivers/net/ehea/ehea_ethtool.c b/drivers/net/ehea/ehea_ethtool.c
index d7688522336..75b099ce49c 100644
--- a/drivers/net/ehea/ehea_ethtool.c
+++ b/drivers/net/ehea/ehea_ethtool.c
@@ -118,7 +118,7 @@ doit:
ret = ehea_set_portspeed(port, sp);
if (!ret)
- ehea_info("%s: Port speed succesfully set: %dMbps "
+ ehea_info("%s: Port speed successfully set: %dMbps "
"%s Duplex",
port->netdev->name, port->port_speed,
port->full_duplex == 1 ? "Full" : "Half");
@@ -134,7 +134,7 @@ static int ehea_nway_reset(struct net_device *dev)
ret = ehea_set_portspeed(port, EHEA_SPEED_AUTONEG);
if (!ret)
- ehea_info("%s: Port speed succesfully set: %dMbps "
+ ehea_info("%s: Port speed successfully set: %dMbps "
"%s Duplex",
port->netdev->name, port->port_speed,
port->full_duplex == 1 ? "Full" : "Half");
diff --git a/drivers/net/hamradio/baycom_ser_fdx.c b/drivers/net/hamradio/baycom_ser_fdx.c
index ed60fd66427..0cab992b3d1 100644
--- a/drivers/net/hamradio/baycom_ser_fdx.c
+++ b/drivers/net/hamradio/baycom_ser_fdx.c
@@ -35,7 +35,7 @@
* driver only supports standard serial hardware (8250, 16450, 16550A)
*
* This modem usually draws its supply current out of the otherwise unused
- * TXD pin of the serial port. Thus a contignuous stream of 0x00-bytes
+ * TXD pin of the serial port. Thus a contiguous stream of 0x00-bytes
* is transmitted to achieve a positive supply voltage.
*
* hsk: This is a 4800 baud FSK modem, designed for TNC use. It works fine
diff --git a/drivers/net/irda/smsc-ircc2.c b/drivers/net/irda/smsc-ircc2.c
index 1e8dd8c74a6..8f7d0d146f2 100644
--- a/drivers/net/irda/smsc-ircc2.c
+++ b/drivers/net/irda/smsc-ircc2.c
@@ -115,7 +115,7 @@ struct smsc_ircc_subsystem_configuration {
unsigned short vendor; /* PCI vendor ID */
unsigned short device; /* PCI vendor ID */
unsigned short subvendor; /* PCI subsystem vendor ID */
- unsigned short subdevice; /* PCI sybsystem device ID */
+ unsigned short subdevice; /* PCI subsystem device ID */
unsigned short sir_io; /* I/O port for SIR */
unsigned short fir_io; /* I/O port for FIR */
unsigned char fir_irq; /* FIR IRQ */
diff --git a/drivers/net/iseries_veth.c b/drivers/net/iseries_veth.c
index 49997194bdd..16c91910d6c 100644
--- a/drivers/net/iseries_veth.c
+++ b/drivers/net/iseries_veth.c
@@ -1384,7 +1384,7 @@ static inline void veth_build_dma_list(struct dma_chunk *list,
unsigned long done;
int i = 1;
- /* FIXME: skbs are continguous in real addresses. Do we
+ /* FIXME: skbs are contiguous in real addresses. Do we
* really need to break it into PAGE_SIZE chunks, or can we do
* it just at the granularity of iSeries real->absolute
* mapping? Indeed, given the way the allocator works, can we
diff --git a/drivers/net/lasi_82596.c b/drivers/net/lasi_82596.c
index a0c578585a5..b77238dbafb 100644
--- a/drivers/net/lasi_82596.c
+++ b/drivers/net/lasi_82596.c
@@ -47,7 +47,7 @@
TBD:
* look at deferring rx frames rather than discarding (as per tulip)
* handle tx ring full as per tulip
- * performace test to tune rx_copybreak
+ * performance test to tune rx_copybreak
Most of my modifications relate to the braindead big-endian
implementation by Intel. When the i596 is operating in
diff --git a/drivers/net/lib82596.c b/drivers/net/lib82596.c
index 7a07430206e..b117f7f8b19 100644
--- a/drivers/net/lib82596.c
+++ b/drivers/net/lib82596.c
@@ -47,7 +47,7 @@
TBD:
* look at deferring rx frames rather than discarding (as per tulip)
* handle tx ring full as per tulip
- * performace test to tune rx_copybreak
+ * performance test to tune rx_copybreak
Most of my modifications relate to the braindead big-endian
implementation by Intel. When the i596 is operating in
diff --git a/drivers/net/mlx4/en_rx.c b/drivers/net/mlx4/en_rx.c
index 03b781a7a18..829b9ec9ff6 100644
--- a/drivers/net/mlx4/en_rx.c
+++ b/drivers/net/mlx4/en_rx.c
@@ -204,7 +204,7 @@ static void mlx4_en_free_rx_desc(struct mlx4_en_priv *priv,
en_dbg(DRV, priv, "Freeing fragment:%d\n", nr);
dma = be64_to_cpu(rx_desc->data[nr].addr);
- en_dbg(DRV, priv, "Unmaping buffer at dma:0x%llx\n", (u64) dma);
+ en_dbg(DRV, priv, "Unmapping buffer at dma:0x%llx\n", (u64) dma);
pci_unmap_single(mdev->pdev, dma, skb_frags[nr].size,
PCI_DMA_FROMDEVICE);
put_page(skb_frags[nr].page);
diff --git a/drivers/net/mlx4/en_tx.c b/drivers/net/mlx4/en_tx.c
index 8c7279965b4..3d1396af946 100644
--- a/drivers/net/mlx4/en_tx.c
+++ b/drivers/net/mlx4/en_tx.c
@@ -47,7 +47,7 @@ enum {
static int inline_thold __read_mostly = MAX_INLINE;
module_param_named(inline_thold, inline_thold, int, 0444);
-MODULE_PARM_DESC(inline_thold, "treshold for using inline data");
+MODULE_PARM_DESC(inline_thold, "threshold for using inline data");
int mlx4_en_create_tx_ring(struct mlx4_en_priv *priv,
struct mlx4_en_tx_ring *ring, u32 size,
diff --git a/drivers/net/mlx4/mlx4_en.h b/drivers/net/mlx4/mlx4_en.h
index 4376147b0ea..82c3ebc584e 100644
--- a/drivers/net/mlx4/mlx4_en.h
+++ b/drivers/net/mlx4/mlx4_en.h
@@ -162,7 +162,7 @@ enum {
#define MLX4_EN_DEF_RX_PAUSE 1
#define MLX4_EN_DEF_TX_PAUSE 1
-/* Interval between sucessive polls in the Tx routine when polling is used
+/* Interval between successive polls in the Tx routine when polling is used
instead of interrupts (in per-core Tx rings) - should be power of 2 */
#define MLX4_EN_TX_POLL_MODER 16
#define MLX4_EN_TX_POLL_TIMEOUT (HZ / 4)
diff --git a/drivers/net/ps3_gelic_net.c b/drivers/net/ps3_gelic_net.c
index 89c4948300a..0c768593aad 100644
--- a/drivers/net/ps3_gelic_net.c
+++ b/drivers/net/ps3_gelic_net.c
@@ -314,7 +314,7 @@ static void gelic_card_reset_chain(struct gelic_card *card,
* @card: card structure
* @descr: descriptor to re-init
*
- * return 0 on succes, <0 on failure
+ * return 0 on success, <0 on failure
*
* allocates a new rx skb, iommu-maps it and attaches it to the descriptor.
* Activate the descriptor state-wise
diff --git a/drivers/net/ps3_gelic_wireless.h b/drivers/net/ps3_gelic_wireless.h
index 5b631c6c977..0a88b535197 100644
--- a/drivers/net/ps3_gelic_wireless.h
+++ b/drivers/net/ps3_gelic_wireless.h
@@ -199,7 +199,7 @@ struct gelic_eurus_rssi_info {
/* for 'stat' member of gelic_wl_info */
enum gelic_wl_info_status_bit {
GELIC_WL_STAT_CONFIGURED,
- GELIC_WL_STAT_CH_INFO, /* ch info aquired */
+ GELIC_WL_STAT_CH_INFO, /* ch info acquired */
GELIC_WL_STAT_ESSID_SET, /* ESSID specified by userspace */
GELIC_WL_STAT_BSSID_SET, /* BSSID specified by userspace */
GELIC_WL_STAT_WPA_PSK_SET, /* PMK specified by userspace */
diff --git a/drivers/net/qla3xxx.c b/drivers/net/qla3xxx.c
index e3e6bc917c8..dd35066a7f8 100644
--- a/drivers/net/qla3xxx.c
+++ b/drivers/net/qla3xxx.c
@@ -3651,7 +3651,7 @@ static int ql_adapter_up(struct ql3_adapter *qdev)
ql_sem_unlock(qdev, QL_DRVR_SEM_MASK);
} else {
printk(KERN_ERR PFX
- "%s: Could not aquire driver lock.\n",
+ "%s: Could not acquire driver lock.\n",
ndev->name);
goto err_lock;
}
diff --git a/drivers/net/s2io.c b/drivers/net/s2io.c
index 0dd7839322b..cc4218667cb 100644
--- a/drivers/net/s2io.c
+++ b/drivers/net/s2io.c
@@ -3238,7 +3238,7 @@ static u64 s2io_mdio_read(u32 mmd_type, u64 addr, struct net_device *dev)
/**
* s2io_chk_xpak_counter - Function to check the status of the xpak counters
- * @counter : couter value to be updated
+ * @counter : counter value to be updated
* @flag : flag to indicate the status
* @type : counter type
* Description:
diff --git a/drivers/net/sis900.c b/drivers/net/sis900.c
index 9a12d88ac2d..7360d4bbf75 100644
--- a/drivers/net/sis900.c
+++ b/drivers/net/sis900.c
@@ -1760,7 +1760,7 @@ static int sis900_rx(struct net_device *net_dev)
sis_priv->rx_ring[entry].bufptr, RX_BUF_SIZE,
PCI_DMA_FROMDEVICE);
- /* refill the Rx buffer, what if there is not enought
+ /* refill the Rx buffer, what if there is not enough
* memory for new socket buffer ?? */
if ((skb = dev_alloc_skb(RX_BUF_SIZE)) == NULL) {
/*
@@ -1775,7 +1775,7 @@ static int sis900_rx(struct net_device *net_dev)
}
/* This situation should never happen, but due to
- some unknow bugs, it is possible that
+ some unknown bugs, it is possible that
we are working on NULL sk_buff :-( */
if (sis_priv->rx_skbuff[entry] == NULL) {
if (netif_msg_rx_err(sis_priv))
diff --git a/drivers/net/skfp/h/smc.h b/drivers/net/skfp/h/smc.h
index 1758d954836..026a83b9f74 100644
--- a/drivers/net/skfp/h/smc.h
+++ b/drivers/net/skfp/h/smc.h
@@ -393,10 +393,10 @@ struct smt_config {
*/
u_long mac_d_max ; /* MAC : D_Max timer value */
- u_long lct_short ; /* LCT : error threshhold */
- u_long lct_medium ; /* LCT : error threshhold */
- u_long lct_long ; /* LCT : error threshhold */
- u_long lct_extended ; /* LCT : error threshhold */
+ u_long lct_short ; /* LCT : error threshold */
+ u_long lct_medium ; /* LCT : error threshold */
+ u_long lct_long ; /* LCT : error threshold */
+ u_long lct_extended ; /* LCT : error threshold */
} ;
#ifdef DEBUG
diff --git a/drivers/net/skfp/skfddi.c b/drivers/net/skfp/skfddi.c
index b27156eaf26..db216a72850 100644
--- a/drivers/net/skfp/skfddi.c
+++ b/drivers/net/skfp/skfddi.c
@@ -1002,7 +1002,7 @@ static int skfp_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
}
break;
default:
- printk("ioctl for %s: unknow cmd: %04x\n", dev->name, ioc.cmd);
+ printk("ioctl for %s: unknown cmd: %04x\n", dev->name, ioc.cmd);
status = -EOPNOTSUPP;
} // switch
diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c
index 3943d89afb2..044e6817986 100644
--- a/drivers/net/sky2.c
+++ b/drivers/net/sky2.c
@@ -2017,7 +2017,7 @@ static void sky2_link_down(struct sky2_port *sky2)
netif_carrier_off(sky2->netdev);
- /* Turn on link LED */
+ /* Turn off link LED */
sky2_write8(hw, SK_REG(port, LNK_LED_REG), LINKLED_OFF);
if (netif_msg_link(sky2))
diff --git a/drivers/net/smsc911x.c b/drivers/net/smsc911x.c
index 4d0d5c56bed..20d6095cf41 100644
--- a/drivers/net/smsc911x.c
+++ b/drivers/net/smsc911x.c
@@ -816,7 +816,7 @@ static int smsc911x_mii_probe(struct net_device *dev)
SMSC_TRACE(HW, "Passed Loop Back Test");
#endif /* USE_PHY_WORK_AROUND */
- SMSC_TRACE(HW, "phy initialised succesfully");
+ SMSC_TRACE(HW, "phy initialised successfully");
return 0;
}
diff --git a/drivers/net/smsc911x.h b/drivers/net/smsc911x.h
index b5716bd8a59..016360c65ce 100644
--- a/drivers/net/smsc911x.h
+++ b/drivers/net/smsc911x.h
@@ -30,7 +30,7 @@
#define SMSC_NAPI_WEIGHT 16
/* implements a PHY loopback test at initialisation time, to ensure a packet
- * can be succesfully looped back */
+ * can be successfully looped back */
#define USE_PHY_WORK_AROUND
#define DPRINTK(nlevel, klevel, fmt, args...) \
diff --git a/drivers/net/spider_net.c b/drivers/net/spider_net.c
index 782910cf220..218524857bf 100644
--- a/drivers/net/spider_net.c
+++ b/drivers/net/spider_net.c
@@ -410,7 +410,7 @@ spider_net_free_rx_chain_contents(struct spider_net_card *card)
* @card: card structure
* @descr: descriptor to re-init
*
- * Return 0 on succes, <0 on failure.
+ * Return 0 on success, <0 on failure.
*
* Allocates a new rx skb, iommu-maps it and attaches it to the
* descriptor. Mark the descriptor as activated, ready-to-use.
diff --git a/drivers/net/stmmac/gmac.c b/drivers/net/stmmac/gmac.c
index b624bb5bae0..52586ee6895 100644
--- a/drivers/net/stmmac/gmac.c
+++ b/drivers/net/stmmac/gmac.c
@@ -112,7 +112,7 @@ static void gmac_dma_operation_mode(unsigned long ioaddr, int txmode,
" (threshold = %d)\n", txmode);
csr6 &= ~DMA_CONTROL_TSF;
csr6 &= DMA_CONTROL_TC_TX_MASK;
- /* Set the transmit threashold */
+ /* Set the transmit threshold */
if (txmode <= 32)
csr6 |= DMA_CONTROL_TTC_32;
else if (txmode <= 64)
diff --git a/drivers/net/stmmac/gmac.h b/drivers/net/stmmac/gmac.h
index 684a363120a..2e82d6c9a14 100644
--- a/drivers/net/stmmac/gmac.h
+++ b/drivers/net/stmmac/gmac.h
@@ -154,14 +154,14 @@ enum rx_tx_priority_ratio {
#define DMA_CONTROL_DT 0x04000000 /* Disable Drop TCP/IP csum error */
#define DMA_CONTROL_RSF 0x02000000 /* Receive Store and Forward */
#define DMA_CONTROL_DFF 0x01000000 /* Disaable flushing */
-/* Theshold for Activating the FC */
+/* Threshold for Activating the FC */
enum rfa {
act_full_minus_1 = 0x00800000,
act_full_minus_2 = 0x00800200,
act_full_minus_3 = 0x00800400,
act_full_minus_4 = 0x00800600,
};
-/* Theshold for Deactivating the FC */
+/* Threshold for Deactivating the FC */
enum rfd {
deac_full_minus_1 = 0x00400000,
deac_full_minus_2 = 0x00400800,
diff --git a/drivers/net/tokenring/ibmtr.c b/drivers/net/tokenring/ibmtr.c
index 5db0270957a..66272f2a075 100644
--- a/drivers/net/tokenring/ibmtr.c
+++ b/drivers/net/tokenring/ibmtr.c
@@ -96,7 +96,7 @@
*
* Change by Mike Sullivan et al.:
* + added turbo card support. No need to use lanaid to configure
- * the adapter into isa compatiblity mode.
+ * the adapter into isa compatibility mode.
*
* Changes by Burt Silverman to allow the computer to behave nicely when
* a cable is pulled or not in place, or a PCMCIA card is removed hot.
diff --git a/drivers/net/tokenring/smctr.c b/drivers/net/tokenring/smctr.c
index 427a8970b6f..5401d86a7be 100644
--- a/drivers/net/tokenring/smctr.c
+++ b/drivers/net/tokenring/smctr.c
@@ -426,7 +426,7 @@ static int smctr_alloc_shared_memory(struct net_device *dev)
smctr_malloc(dev, 1L);
/* Allocate Non-MAC receive data buffers.
- * To guarantee a minimum of 256 contigous memory to
+ * To guarantee a minimum of 256 contiguous memory to
* UM_Receive_Packet's lookahead pointer, before a page
* change or ring end is encountered, place each rx buffer on
* a 256 byte boundary.
diff --git a/drivers/net/ucc_geth.c b/drivers/net/ucc_geth.c
index 9f44c99777a..afaf088b72e 100644
--- a/drivers/net/ucc_geth.c
+++ b/drivers/net/ucc_geth.c
@@ -3798,7 +3798,7 @@ static int ucc_geth_probe(struct of_device* ofdev, const struct of_device_id *ma
prop = of_get_property(np, "tx-clock", NULL);
if (!prop) {
printk(KERN_ERR
- "ucc_geth: mising tx-clock-name property\n");
+ "ucc_geth: missing tx-clock-name property\n");
return -EINVAL;
}
if ((*prop < QE_CLK_NONE) || (*prop > QE_CLK24)) {
diff --git a/drivers/net/ucc_geth.h b/drivers/net/ucc_geth.h
index 03a6ca016d5..a007e2acf65 100644
--- a/drivers/net/ucc_geth.h
+++ b/drivers/net/ucc_geth.h
@@ -80,16 +80,16 @@ struct ucc_geth {
frames) received that were between 128
(Including FCS length==4) and 255 octets */
u32 txok; /* Total number of octets residing in frames
- that where involved in succesfull
+ that where involved in successfull
transmission */
u16 txcf; /* Total number of PAUSE control frames
transmitted by this MAC */
u8 res4[0x2];
u32 tmca; /* Total number of frames that were transmitted
- succesfully with the group address bit set
+ successfully with the group address bit set
that are not broadcast frames */
u32 tbca; /* Total number of frames transmitted
- succesfully that had destination address
+ successfully that had destination address
field equal to the broadcast address */
u32 rxfok; /* Total number of frames received OK */
u32 rxbok; /* Total number of octets received OK */
@@ -98,9 +98,9 @@ struct ucc_geth {
HW because it includes octets in frames that
never even reach the UCC */
u32 rmca; /* Total number of frames that were received
- succesfully with the group address bit set
+ successfully with the group address bit set
that are not broadcast frames */
- u32 rbca; /* Total number of frames received succesfully
+ u32 rbca; /* Total number of frames received successfully
that had destination address equal to the
broadcast address */
u32 scar; /* Statistics carry register */
@@ -759,15 +759,15 @@ struct ucc_geth_hardware_statistics {
frames) received that were between 128
(Including FCS length==4) and 255 octets */
u32 txok; /* Total number of octets residing in frames
- that where involved in succesfull
+ that where involved in successfull
transmission */
u16 txcf; /* Total number of PAUSE control frames
transmitted by this MAC */
u32 tmca; /* Total number of frames that were transmitted
- succesfully with the group address bit set
+ successfully with the group address bit set
that are not broadcast frames */
u32 tbca; /* Total number of frames transmitted
- succesfully that had destination address
+ successfully that had destination address
field equal to the broadcast address */
u32 rxfok; /* Total number of frames received OK */
u32 rxbok; /* Total number of octets received OK */
@@ -776,9 +776,9 @@ struct ucc_geth_hardware_statistics {
HW because it includes octets in frames that
never even reach the UCC */
u32 rmca; /* Total number of frames that were received
- succesfully with the group address bit set
+ successfully with the group address bit set
that are not broadcast frames */
- u32 rbca; /* Total number of frames received succesfully
+ u32 rbca; /* Total number of frames received successfully
that had destination address equal to the
broadcast address */
} __attribute__ ((packed));
diff --git a/drivers/net/usb/smsc95xx.c b/drivers/net/usb/smsc95xx.c
index c6c922247d0..0c3c738d741 100644
--- a/drivers/net/usb/smsc95xx.c
+++ b/drivers/net/usb/smsc95xx.c
@@ -748,7 +748,7 @@ static int smsc95xx_phy_initialize(struct usbnet *dev)
mii_nway_restart(&dev->mii);
if (netif_msg_ifup(dev))
- devdbg(dev, "phy initialised succesfully");
+ devdbg(dev, "phy initialised successfully");
return 0;
}
diff --git a/drivers/net/wan/hdlc_fr.c b/drivers/net/wan/hdlc_fr.c
index a7d4fc1a03a..0e52993e207 100644
--- a/drivers/net/wan/hdlc_fr.c
+++ b/drivers/net/wan/hdlc_fr.c
@@ -182,7 +182,7 @@ static inline pvc_device* find_pvc(hdlc_device *hdlc, u16 dlci)
if (pvc->dlci == dlci)
return pvc;
if (pvc->dlci > dlci)
- return NULL; /* the listed is sorted */
+ return NULL; /* the list is sorted */
pvc = pvc->next;
}
diff --git a/drivers/net/wan/lmc/lmc_main.c b/drivers/net/wan/lmc/lmc_main.c
index 2ebe935d105..4b6f27e7c82 100644
--- a/drivers/net/wan/lmc/lmc_main.c
+++ b/drivers/net/wan/lmc/lmc_main.c
@@ -927,7 +927,7 @@ static int __devinit lmc_init_one(struct pci_dev *pdev,
sc->lmc_media = &lmc_t1_media;
break;
default:
- printk(KERN_WARNING "%s: LMC UNKOWN CARD!\n", dev->name);
+ printk(KERN_WARNING "%s: LMC UNKNOWN CARD!\n", dev->name);
break;
}
diff --git a/drivers/net/wimax/i2400m/rx.c b/drivers/net/wimax/i2400m/rx.c
index e3d2a9de023..7ddb173fd4a 100644
--- a/drivers/net/wimax/i2400m/rx.c
+++ b/drivers/net/wimax/i2400m/rx.c
@@ -1194,7 +1194,7 @@ error:
* device. See the file header for the format. Run all checks on the
* buffer header, then run over each payload's descriptors, verify
* their consistency and act on each payload's contents. If
- * everything is succesful, update the device's statistics.
+ * everything is successful, update the device's statistics.
*
* Note: You need to set the skb to contain only the length of the
* received buffer; for that, use skb_trim(skb, RECEIVED_SIZE).
diff --git a/drivers/net/wireless/ath/ath5k/base.h b/drivers/net/wireless/ath/ath5k/base.h
index b72338c9bde..952b3a21bbc 100644
--- a/drivers/net/wireless/ath/ath5k/base.h
+++ b/drivers/net/wireless/ath/ath5k/base.h
@@ -36,7 +36,7 @@
*/
/*
- * Defintions for the Atheros Wireless LAN controller driver.
+ * Definitions for the Atheros Wireless LAN controller driver.
*/
#ifndef _DEV_ATH_ATHVAR_H
#define _DEV_ATH_ATHVAR_H
@@ -190,7 +190,7 @@ struct ath5k_softc {
struct ath5k_txq *cabq; /* content after beacon */
int power_level; /* Requested tx power in dbm */
- bool assoc; /* assocate state */
+ bool assoc; /* associate state */
bool enable_beacon; /* true if beacons are on */
};
diff --git a/drivers/net/wireless/ath/ath5k/eeprom.c b/drivers/net/wireless/ath/ath5k/eeprom.c
index 644962adda9..81ea52c4faf 100644
--- a/drivers/net/wireless/ath/ath5k/eeprom.c
+++ b/drivers/net/wireless/ath/ath5k/eeprom.c
@@ -1492,7 +1492,7 @@ ath5k_eeprom_read_target_rate_pwr_info(struct ath5k_hw *ah, unsigned int mode)
* This info is used to calibrate the baseband power table. Imagine
* that for each channel there is a power curve that's hw specific
* (depends on amplifier etc) and we try to "correct" this curve using
- * offests we pass on to phy chip (baseband -> before amplifier) so that
+ * offsets we pass on to phy chip (baseband -> before amplifier) so that
* it can use accurate power values when setting tx power (takes amplifier's
* performance on each channel into account).
*
diff --git a/drivers/net/wireless/ath/ath5k/phy.c b/drivers/net/wireless/ath/ath5k/phy.c
index bbfdcd5e7cb..72474c0ccaf 100644
--- a/drivers/net/wireless/ath/ath5k/phy.c
+++ b/drivers/net/wireless/ath/ath5k/phy.c
@@ -117,7 +117,7 @@ static unsigned int ath5k_hw_rfb_op(struct ath5k_hw *ah,
/*
* This code is used to optimize rf gain on different environments
- * (temprature mostly) based on feedback from a power detector.
+ * (temperature mostly) based on feedback from a power detector.
*
* It's only used on RF5111 and RF5112, later RF chips seem to have
* auto adjustment on hw -notice they have a much smaller BANK 7 and
@@ -2746,7 +2746,7 @@ ath5k_setup_channel_powertable(struct ath5k_hw *ah,
/* Fill curves in reverse order
* from lower power (max gain)
* to higher power. Use curve -> idx
- * backmaping we did on eeprom init */
+ * backmapping we did on eeprom init */
u8 idx = pdg_curve_to_idx[pdg];
/* Grab the needed curves by index */
@@ -2848,7 +2848,7 @@ ath5k_setup_channel_powertable(struct ath5k_hw *ah,
/* Now we have a set of curves for this
* channel on tmpL (x range is table_max - table_min
* and y values are tmpL[pdg][]) sorted in the same
- * order as EEPROM (because we've used the backmaping).
+ * order as EEPROM (because we've used the backmapping).
* So for RF5112 it's from higher power to lower power
* and for RF2413 it's from lower power to higher power.
* For RF5111 we only have one curve. */
diff --git a/drivers/net/wireless/ath/ath9k/rc.c b/drivers/net/wireless/ath/ath9k/rc.c
index c915954d4d5..70fdb9d8db8 100644
--- a/drivers/net/wireless/ath/ath9k/rc.c
+++ b/drivers/net/wireless/ath/ath9k/rc.c
@@ -880,7 +880,7 @@ static bool ath_rc_update_per(struct ath_softc *sc,
* Since this probe succeeded, we allow the next
* probe twice as soon. This allows the maxRate
* to move up faster if the probes are
- * succesful.
+ * successful.
*/
ath_rc_priv->probe_time =
now_msec - rate_table->probe_interval / 2;
diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c
index 077480c4916..71e5c996bd0 100644
--- a/drivers/net/wireless/b43/main.c
+++ b/drivers/net/wireless/b43/main.c
@@ -2955,7 +2955,7 @@ static void do_periodic_work(struct b43_wldev *dev)
/* Periodic work locking policy:
* The whole periodic work handler is protected by
* wl->mutex. If another lock is needed somewhere in the
- * pwork callchain, it's aquired in-place, where it's needed.
+ * pwork callchain, it's acquired in-place, where it's needed.
*/
static void b43_periodic_work_handler(struct work_struct *work)
{
diff --git a/drivers/net/wireless/b43legacy/main.c b/drivers/net/wireless/b43legacy/main.c
index ab6a18c2e9d..4a905b6a886 100644
--- a/drivers/net/wireless/b43legacy/main.c
+++ b/drivers/net/wireless/b43legacy/main.c
@@ -2277,7 +2277,7 @@ static void do_periodic_work(struct b43legacy_wldev *dev)
/* Periodic work locking policy:
* The whole periodic work handler is protected by
* wl->mutex. If another lock is needed somewhere in the
- * pwork callchain, it's aquired in-place, where it's needed.
+ * pwork callchain, it's acquired in-place, where it's needed.
*/
static void b43legacy_periodic_work_handler(struct work_struct *work)
{
diff --git a/drivers/net/wireless/ipw2x00/ipw2100.c b/drivers/net/wireless/ipw2x00/ipw2100.c
index 17a9cb3528f..56afcf041f8 100644
--- a/drivers/net/wireless/ipw2x00/ipw2100.c
+++ b/drivers/net/wireless/ipw2x00/ipw2100.c
@@ -578,7 +578,7 @@ static int ipw2100_get_ordinal(struct ipw2100_priv *priv, u32 ord,
/* get number of entries */
field_count = *(((u16 *) & field_info) + 1);
- /* abort if no enought memory */
+ /* abort if no enough memory */
total_length = field_len * field_count;
if (total_length > *len) {
*len = total_length;
@@ -3127,7 +3127,7 @@ static void ipw2100_tx_send_data(struct ipw2100_priv *priv)
IPW_MAX_BDS)) {
/* TODO: Support merging buffers if more than
* IPW_MAX_BDS are used */
- IPW_DEBUG_INFO("%s: Maximum BD theshold exceeded. "
+ IPW_DEBUG_INFO("%s: Maximum BD threshold exceeded. "
"Increase fragmentation level.\n",
priv->net_dev->name);
}
@@ -6897,7 +6897,7 @@ static int ipw2100_wx_get_range(struct net_device *dev,
range->max_qual.updated = 7; /* Updated all three */
range->avg_qual.qual = 70; /* > 8% missed beacons is 'bad' */
- /* TODO: Find real 'good' to 'bad' threshol value for RSSI */
+ /* TODO: Find real 'good' to 'bad' threshold value for RSSI */
range->avg_qual.level = 20 + IPW2100_RSSI_TO_DBM;
range->avg_qual.noise = 0;
range->avg_qual.updated = 7; /* Updated all three */
diff --git a/drivers/net/wireless/ipw2x00/ipw2200.c b/drivers/net/wireless/ipw2x00/ipw2200.c
index c28984ae46f..09ddd3e6bed 100644
--- a/drivers/net/wireless/ipw2x00/ipw2200.c
+++ b/drivers/net/wireless/ipw2x00/ipw2200.c
@@ -792,7 +792,7 @@ static int ipw_get_ordinal(struct ipw_priv *priv, u32 ord, void *val, u32 * len)
/* get number of entries */
field_count = *(((u16 *) & field_info) + 1);
- /* abort if not enought memory */
+ /* abort if not enough memory */
total_len = field_len * field_count;
if (total_len > *len) {
*len = total_len;
@@ -7760,7 +7760,7 @@ static void ipw_rebuild_decrypted_skb(struct ipw_priv *priv,
case SEC_LEVEL_0:
break;
default:
- printk(KERN_ERR "Unknow security level %d\n",
+ printk(KERN_ERR "Unknown security level %d\n",
priv->ieee->sec.level);
break;
}
@@ -8926,7 +8926,7 @@ static int ipw_wx_get_range(struct net_device *dev,
range->max_qual.updated = 7; /* Updated all three */
range->avg_qual.qual = 70;
- /* TODO: Find real 'good' to 'bad' threshol value for RSSI */
+ /* TODO: Find real 'good' to 'bad' threshold value for RSSI */
range->avg_qual.level = 0; /* FIXME to real average level */
range->avg_qual.noise = 0;
range->avg_qual.updated = 7; /* Updated all three */
@@ -10299,7 +10299,7 @@ static int ipw_tx_skb(struct ipw_priv *priv, struct libipw_txb *txb,
case SEC_LEVEL_0:
break;
default:
- printk(KERN_ERR "Unknow security level %d\n",
+ printk(KERN_ERR "Unknown security level %d\n",
priv->ieee->sec.level);
break;
}
diff --git a/drivers/net/wireless/ipw2x00/libipw_module.c b/drivers/net/wireless/ipw2x00/libipw_module.c
index bf21eb383db..1ae0b2b02c3 100644
--- a/drivers/net/wireless/ipw2x00/libipw_module.c
+++ b/drivers/net/wireless/ipw2x00/libipw_module.c
@@ -199,7 +199,7 @@ struct net_device *alloc_ieee80211(int sizeof_priv, int monitor)
ieee->host_decrypt = 1;
ieee->host_mc_decrypt = 1;
- /* Host fragementation in Open mode. Default is enabled.
+ /* Host fragmentation in Open mode. Default is enabled.
* Note: host fragmentation is always enabled if host encryption
* is enabled. For cards can do hardware encryption, they must do
* hardware fragmentation as well. So we don't need a variable
diff --git a/drivers/net/wireless/iwmc3200wifi/hal.c b/drivers/net/wireless/iwmc3200wifi/hal.c
index c430418248b..d13c8853ee8 100644
--- a/drivers/net/wireless/iwmc3200wifi/hal.c
+++ b/drivers/net/wireless/iwmc3200wifi/hal.c
@@ -411,7 +411,7 @@ static void iwm_build_lmac_hdr(struct iwm_priv *iwm, struct iwm_lmac_hdr *hdr,
/*
* iwm_hal_send_host_cmd(): sends commands to the UMAC or the LMAC.
* Sending command to the LMAC is equivalent to sending a
- * regular UMAC command with the LMAC passtrough or the LMAC
+ * regular UMAC command with the LMAC passthrough or the LMAC
* wrapper UMAC command IDs.
*/
int iwm_hal_send_host_cmd(struct iwm_priv *iwm,
diff --git a/drivers/net/wireless/iwmc3200wifi/rx.c b/drivers/net/wireless/iwmc3200wifi/rx.c
index 72c27a3e552..1c57c1f72cb 100644
--- a/drivers/net/wireless/iwmc3200wifi/rx.c
+++ b/drivers/net/wireless/iwmc3200wifi/rx.c
@@ -1578,7 +1578,7 @@ static void iwm_rx_process_packet(struct iwm_priv *iwm,
kfree_skb(packet->skb);
break;
default:
- IWM_ERR(iwm, "Unknow ticket action: %d\n",
+ IWM_ERR(iwm, "Unknown ticket action: %d\n",
le16_to_cpu(ticket_node->ticket->action));
kfree_skb(packet->skb);
}
diff --git a/drivers/net/wireless/libertas/if_sdio.c b/drivers/net/wireless/libertas/if_sdio.c
index 09fcfad742e..7a73f625273 100644
--- a/drivers/net/wireless/libertas/if_sdio.c
+++ b/drivers/net/wireless/libertas/if_sdio.c
@@ -993,7 +993,7 @@ static int if_sdio_probe(struct sdio_func *func,
}
if (i == ARRAY_SIZE(if_sdio_models)) {
- lbs_pr_err("unkown card model 0x%x\n", card->model);
+ lbs_pr_err("unknown card model 0x%x\n", card->model);
ret = -ENODEV;
goto free;
}
diff --git a/drivers/net/wireless/orinoco/hermes_dld.c b/drivers/net/wireless/orinoco/hermes_dld.c
index a3eefe109df..84200da900b 100644
--- a/drivers/net/wireless/orinoco/hermes_dld.c
+++ b/drivers/net/wireless/orinoco/hermes_dld.c
@@ -550,7 +550,7 @@ static const struct { \
#define DEFAULT_PDR(pid) default_pdr_data_##pid
-/* HWIF Compatiblity */
+/* HWIF Compatibility */
DEFINE_DEFAULT_PDR(0x0005, 10, "\x00\x00\x06\x00\x01\x00\x01\x00\x01\x00");
/* PPPPSign */
@@ -656,7 +656,7 @@ int hermes_apply_pda_with_defaults(hermes_t *hw,
record_id + 1, pdi);
}
break;
- case 0x5: /* HWIF Compatiblity */
+ case 0x5: /* HWIF Compatibility */
default_pdi = (struct pdi *) &DEFAULT_PDR(0x0005);
break;
case 0x108: /* PPPPSign */
diff --git a/drivers/net/wireless/prism54/isl_ioctl.c b/drivers/net/wireless/prism54/isl_ioctl.c
index bc08464d832..f7f5c793514 100644
--- a/drivers/net/wireless/prism54/isl_ioctl.c
+++ b/drivers/net/wireless/prism54/isl_ioctl.c
@@ -1897,7 +1897,7 @@ prism54_get_mac(struct net_device *ndev, struct iw_request_info *info,
return 0;
}
-/* Setting policy also clears the MAC acl, even if we don't change the defaut
+/* Setting policy also clears the MAC acl, even if we don't change the default
* policy
*/
@@ -2323,7 +2323,7 @@ prism54_process_trap_helper(islpci_private *priv, enum oid_num_t oid,
case DOT11_OID_BEACON:
send_formatted_event(priv,
- "Received a beacon from an unkown AP",
+ "Received a beacon from an unknown AP",
mlme, 0);
break;
diff --git a/drivers/net/wireless/rt2x00/rt2400pci.h b/drivers/net/wireless/rt2x00/rt2400pci.h
index 6c21ef66dfe..c3dea697b90 100644
--- a/drivers/net/wireless/rt2x00/rt2400pci.h
+++ b/drivers/net/wireless/rt2x00/rt2400pci.h
@@ -35,7 +35,7 @@
/*
* Signal information.
- * Defaul offset is required for RSSI <-> dBm conversion.
+ * Default offset is required for RSSI <-> dBm conversion.
*/
#define DEFAULT_RSSI_OFFSET 100
diff --git a/drivers/net/wireless/rt2x00/rt2500pci.h b/drivers/net/wireless/rt2x00/rt2500pci.h
index b0075674c09..c6bd1fcae7e 100644
--- a/drivers/net/wireless/rt2x00/rt2500pci.h
+++ b/drivers/net/wireless/rt2x00/rt2500pci.h
@@ -46,7 +46,7 @@
/*
* Signal information.
- * Defaul offset is required for RSSI <-> dBm conversion.
+ * Default offset is required for RSSI <-> dBm conversion.
*/
#define DEFAULT_RSSI_OFFSET 121
diff --git a/drivers/net/wireless/rt2x00/rt2500usb.h b/drivers/net/wireless/rt2x00/rt2500usb.h
index 341a7045463..b493306a7ee 100644
--- a/drivers/net/wireless/rt2x00/rt2500usb.h
+++ b/drivers/net/wireless/rt2x00/rt2500usb.h
@@ -46,7 +46,7 @@
/*
* Signal information.
- * Defaul offset is required for RSSI <-> dBm conversion.
+ * Default offset is required for RSSI <-> dBm conversion.
*/
#define DEFAULT_RSSI_OFFSET 120
diff --git a/drivers/net/wireless/rt2x00/rt61pci.h b/drivers/net/wireless/rt2x00/rt61pci.h
index 6f33f7f5668..8f13810622b 100644
--- a/drivers/net/wireless/rt2x00/rt61pci.h
+++ b/drivers/net/wireless/rt2x00/rt61pci.h
@@ -37,7 +37,7 @@
/*
* Signal information.
- * Defaul offset is required for RSSI <-> dBm conversion.
+ * Default offset is required for RSSI <-> dBm conversion.
*/
#define DEFAULT_RSSI_OFFSET 120
diff --git a/drivers/net/wireless/rt2x00/rt73usb.h b/drivers/net/wireless/rt2x00/rt73usb.h
index e783a099a8f..7942f810e92 100644
--- a/drivers/net/wireless/rt2x00/rt73usb.h
+++ b/drivers/net/wireless/rt2x00/rt73usb.h
@@ -37,7 +37,7 @@
/*
* Signal information.
- * Defaul offset is required for RSSI <-> dBm conversion.
+ * Default offset is required for RSSI <-> dBm conversion.
*/
#define DEFAULT_RSSI_OFFSET 120
diff --git a/drivers/net/wireless/zd1211rw/zd_mac.c b/drivers/net/wireless/zd1211rw/zd_mac.c
index 8a243732c51..cf51e8f8174 100644
--- a/drivers/net/wireless/zd1211rw/zd_mac.c
+++ b/drivers/net/wireless/zd1211rw/zd_mac.c
@@ -374,7 +374,7 @@ static void zd_mac_tx_status(struct ieee80211_hw *hw, struct sk_buff *skb,
* zd_mac_tx_failed - callback for failed frames
* @dev: the mac80211 wireless device
*
- * This function is called if a frame couldn't be succesfully be
+ * This function is called if a frame couldn't be successfully be
* transferred. The first frame from the tx queue, will be selected and
* reported as error to the upper layers.
*/