aboutsummaryrefslogtreecommitdiff
path: root/drivers/pci
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/pci')
-rw-r--r--drivers/pci/pci-driver.c2
-rw-r--r--drivers/pci/quirks.c167
-rw-r--r--drivers/pci/search.c3
3 files changed, 112 insertions, 60 deletions
diff --git a/drivers/pci/pci-driver.c b/drivers/pci/pci-driver.c
index de5b9011d03..b8d2385e29b 100644
--- a/drivers/pci/pci-driver.c
+++ b/drivers/pci/pci-driver.c
@@ -353,6 +353,8 @@ static int pci_device_resume_early(struct device * dev)
struct pci_dev * pci_dev = to_pci_dev(dev);
struct pci_driver * drv = pci_dev->driver;
+ pci_fixup_device(pci_fixup_resume, pci_dev);
+
if (drv && drv->resume_early)
error = drv->resume_early(pci_dev);
return error;
diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index cf3e7c0ded3..30c41fc1c99 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -36,7 +36,7 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_MELLANOX,PCI_DEVICE_ID_MELLANOX_TAVOR_BRID
/* Deal with broken BIOS'es that neglect to enable passive release,
which can cause problems in combination with the 82441FX/PPro MTRRs */
-static void __devinit quirk_passive_release(struct pci_dev *dev)
+static void quirk_passive_release(struct pci_dev *dev)
{
struct pci_dev *d = NULL;
unsigned char dlc;
@@ -53,6 +53,7 @@ static void __devinit quirk_passive_release(struct pci_dev *dev)
}
}
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82441, quirk_passive_release );
+DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82441, quirk_passive_release );
/* The VIA VP2/VP3/MVP3 seem to have some 'features'. There may be a workaround
but VIA don't answer queries. If you happen to have good contacts at VIA
@@ -134,7 +135,7 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82439TX, quir
* Updated based on further information from the site and also on
* information provided by VIA
*/
-static void __devinit quirk_vialatency(struct pci_dev *dev)
+static void quirk_vialatency(struct pci_dev *dev)
{
struct pci_dev *p;
u8 rev;
@@ -185,6 +186,10 @@ exit:
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8363_0, quirk_vialatency );
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8371_1, quirk_vialatency );
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8361, quirk_vialatency );
+/* Must restore this on a resume from RAM */
+DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8363_0, quirk_vialatency );
+DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8371_1, quirk_vialatency );
+DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8361, quirk_vialatency );
/*
* VIA Apollo VP3 needs ETBF on BT848/878
@@ -532,7 +537,7 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8235, quirk_vt8235
* TODO: When we have device-specific interrupt routers,
* this code will go away from quirks.
*/
-static void __devinit quirk_via_ioapic(struct pci_dev *dev)
+static void quirk_via_ioapic(struct pci_dev *dev)
{
u8 tmp;
@@ -548,6 +553,7 @@ static void __devinit quirk_via_ioapic(struct pci_dev *dev)
pci_write_config_byte (dev, 0x58, tmp);
}
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686, quirk_via_ioapic );
+DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686, quirk_via_ioapic );
/*
* VIA 8237: Some BIOSs don't set the 'Bypass APIC De-Assert Message' Bit.
@@ -555,7 +561,7 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686, quirk_via_i
* Set this bit to get rid of cycle wastage.
* Otherwise uncritical.
*/
-static void __devinit quirk_via_vt8237_bypass_apic_deassert(struct pci_dev *dev)
+static void quirk_via_vt8237_bypass_apic_deassert(struct pci_dev *dev)
{
u8 misc_control2;
#define BYPASS_APIC_DEASSERT 8
@@ -567,6 +573,7 @@ static void __devinit quirk_via_vt8237_bypass_apic_deassert(struct pci_dev *dev)
}
}
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237, quirk_via_vt8237_bypass_apic_deassert);
+DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237, quirk_via_vt8237_bypass_apic_deassert);
/*
* The AMD io apic can hang the box when an apic irq is masked.
@@ -600,7 +607,7 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_SI, PCI_ANY_ID, quirk_ioapic_rmw );
#define AMD8131_revB0 0x11
#define AMD8131_MISC 0x40
#define AMD8131_NIOAMODE_BIT 0
-static void __init quirk_amd_8131_ioapic(struct pci_dev *dev)
+static void quirk_amd_8131_ioapic(struct pci_dev *dev)
{
unsigned char revid, tmp;
@@ -616,6 +623,7 @@ static void __init quirk_amd_8131_ioapic(struct pci_dev *dev)
}
}
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8131_BRIDGE, quirk_amd_8131_ioapic);
+DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8131_BRIDGE, quirk_amd_8131_ioapic);
#endif /* CONFIG_X86_IO_APIC */
@@ -641,65 +649,84 @@ static void __devinit quirk_via_acpi(struct pci_dev *d)
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_3, quirk_via_acpi );
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686_4, quirk_via_acpi );
-/*
- * Via 686A/B: The PCI_INTERRUPT_LINE register for the on-chip
- * devices, USB0/1, AC97, MC97, and ACPI, has an unusual feature:
- * when written, it makes an internal connection to the PIC.
- * For these devices, this register is defined to be 4 bits wide.
- * Normally this is fine. However for IO-APIC motherboards, or
- * non-x86 architectures (yes Via exists on PPC among other places),
- * we must mask the PCI_INTERRUPT_LINE value versus 0xf to get
- * interrupts delivered properly.
- *
- * Some of the on-chip devices are actually '586 devices' so they are
- * listed here.
- */
-
-static int via_irq_fixup_needed = -1;
/*
- * As some VIA hardware is available in PCI-card form, we need to restrict
- * this quirk to VIA PCI hardware built onto VIA-based motherboards only.
- * We try to locate a VIA southbridge before deciding whether the quirk
- * should be applied.
+ * VIA bridges which have VLink
*/
-static const struct pci_device_id via_irq_fixup_tbl[] = {
- {
- .vendor = PCI_VENDOR_ID_VIA,
- .device = PCI_ANY_ID,
- .subvendor = PCI_ANY_ID,
- .subdevice = PCI_ANY_ID,
- .class = PCI_CLASS_BRIDGE_ISA << 8,
- .class_mask = 0xffff00,
- },
+
+static const struct pci_device_id via_vlink_fixup_tbl[] = {
+ /* Internal devices need IRQ line routing, pre VLink */
+ { PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_82C686), 0 },
+ { PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_8231), 17 },
+ /* Devices with VLink */
+ { PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_8233_0), 17},
+ { PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_8233A), 17 },
+ { PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_8233C_0), 17 },
+ { PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_8235), 16 },
+ { PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_8237), 15 },
+ { PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_8237A), 15 },
{ 0, },
};
-static void quirk_via_irq(struct pci_dev *dev)
+/**
+ * quirk_via_vlink - VIA VLink IRQ number update
+ * @dev: PCI device
+ *
+ * If the device we are dealing with is on a PIC IRQ we need to
+ * ensure that the IRQ line register which usually is not relevant
+ * for PCI cards, is actually written so that interrupts get sent
+ * to the right place
+ */
+
+static void quirk_via_vlink(struct pci_dev *dev)
{
+ const struct pci_device_id *via_vlink_fixup;
+ static int dev_lo = -1, dev_hi = 18;
u8 irq, new_irq;
- if (via_irq_fixup_needed == -1)
- via_irq_fixup_needed = pci_dev_present(via_irq_fixup_tbl);
+ /* Check if we have VLink and cache the result */
- if (!via_irq_fixup_needed)
+ /* Checked already - no */
+ if (dev_lo == -2)
return;
+ /* Not checked - see what bridge we have and find the device
+ ranges */
+
+ if (dev_lo == -1) {
+ via_vlink_fixup = pci_find_present(via_vlink_fixup_tbl);
+ if (via_vlink_fixup == NULL) {
+ dev_lo = -2;
+ return;
+ }
+ dev_lo = via_vlink_fixup->driver_data;
+ /* 82C686 is special - 0/0 */
+ if (dev_lo == 0)
+ dev_hi = 0;
+ }
new_irq = dev->irq;
/* Don't quirk interrupts outside the legacy IRQ range */
if (!new_irq || new_irq > 15)
return;
+ /* Internal device ? */
+ if (dev->bus->number != 0 || PCI_SLOT(dev->devfn) > dev_hi ||
+ PCI_SLOT(dev->devfn) < dev_lo)
+ return;
+
+ /* This is an internal VLink device on a PIC interrupt. The BIOS
+ ought to have set this but may not have, so we redo it */
+
pci_read_config_byte(dev, PCI_INTERRUPT_LINE, &irq);
if (new_irq != irq) {
- printk(KERN_INFO "PCI: VIA IRQ fixup for %s, from %d to %d\n",
+ printk(KERN_INFO "PCI: VIA VLink IRQ fixup for %s, from %d to %d\n",
pci_name(dev), irq, new_irq);
udelay(15); /* unknown if delay really needed */
pci_write_config_byte(dev, PCI_INTERRUPT_LINE, new_irq);
}
}
-DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_ANY_ID, quirk_via_irq);
+DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_ANY_ID, quirk_via_vlink);
/*
* VIA VT82C598 has its device ID settable and many BIOSes
@@ -720,13 +747,14 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C597_0, quirk_vt
* do this even if the Linux CardBus driver is not loaded, because
* the Linux i82365 driver does not (and should not) handle CardBus.
*/
-static void __devinit quirk_cardbus_legacy(struct pci_dev *dev)
+static void quirk_cardbus_legacy(struct pci_dev *dev)
{
if ((PCI_CLASS_BRIDGE_CARDBUS << 8) ^ dev->class)
return;
pci_write_config_dword(dev, PCI_CB_LEGACY_MODE_BASE, 0);
}
DECLARE_PCI_FIXUP_FINAL(PCI_ANY_ID, PCI_ANY_ID, quirk_cardbus_legacy);
+DECLARE_PCI_FIXUP_RESUME(PCI_ANY_ID, PCI_ANY_ID, quirk_cardbus_legacy);
/*
* Following the PCI ordering rules is optional on the AMD762. I'm not
@@ -735,7 +763,7 @@ DECLARE_PCI_FIXUP_FINAL(PCI_ANY_ID, PCI_ANY_ID, quirk_cardbus_legacy);
* To be fair to AMD, it follows the spec by default, its BIOS people
* who turn it off!
*/
-static void __devinit quirk_amd_ordering(struct pci_dev *dev)
+static void quirk_amd_ordering(struct pci_dev *dev)
{
u32 pcic;
pci_read_config_dword(dev, 0x4C, &pcic);
@@ -749,6 +777,7 @@ static void __devinit quirk_amd_ordering(struct pci_dev *dev)
}
}
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_FE_GATE_700C, quirk_amd_ordering );
+DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_FE_GATE_700C, quirk_amd_ordering );
/*
* DreamWorks provided workaround for Dunord I-3000 problem
@@ -784,7 +813,7 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_TOSHIBA, 0x605, quirk_transparent_bridge
* datasheets found at http://www.national.com/ds/GX for info on what
* these bits do. <christer@weinigel.se>
*/
-static void __init quirk_mediagx_master(struct pci_dev *dev)
+static void quirk_mediagx_master(struct pci_dev *dev)
{
u8 reg;
pci_read_config_byte(dev, 0x41, &reg);
@@ -795,13 +824,14 @@ static void __init quirk_mediagx_master(struct pci_dev *dev)
}
}
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_PCI_MASTER, quirk_mediagx_master );
+DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_PCI_MASTER, quirk_mediagx_master );
/*
* Ensure C0 rev restreaming is off. This is normally done by
* the BIOS but in the odd case it is not the results are corruption
* hence the presence of a Linux check
*/
-static void __init quirk_disable_pxb(struct pci_dev *pdev)
+static void quirk_disable_pxb(struct pci_dev *pdev)
{
u16 config;
u8 rev;
@@ -817,6 +847,7 @@ static void __init quirk_disable_pxb(struct pci_dev *pdev)
}
}
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82454NX, quirk_disable_pxb );
+DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82454NX, quirk_disable_pxb );
/*
@@ -874,7 +905,7 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82375, quirk_e
* runs everywhere at present we suppress the printk output in most
* irrelevant cases.
*/
-static void __init k8t_sound_hostbridge(struct pci_dev *dev)
+static void k8t_sound_hostbridge(struct pci_dev *dev)
{
unsigned char val;
@@ -893,8 +924,8 @@ static void __init k8t_sound_hostbridge(struct pci_dev *dev)
}
}
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237, k8t_sound_hostbridge);
+DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237, k8t_sound_hostbridge);
-#ifndef CONFIG_ACPI_SLEEP
/*
* On ASUS P4B boards, the SMBus PCI Device within the ICH2/4 southbridge
* is not activated. The myth is that Asus said that they do not want the
@@ -906,10 +937,6 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237, k8t_sound_ho
* bridge. Unfortunately, this device has no subvendor/subdevice ID. So it
* becomes necessary to do this tweak in two steps -- I've chosen the Host
* bridge as trigger.
- *
- * Actually, leaving it unhidden and not redoing the quirk over suspend2ram
- * will cause thermal management to break down, and causing machine to
- * overheat.
*/
static int __initdata asus_hides_smbus;
@@ -1019,7 +1046,7 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82855PM_HB, as
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82855GM_HB, asus_hides_smbus_hostbridge );
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82915GM_HB, asus_hides_smbus_hostbridge );
-static void __init asus_hides_smbus_lpc(struct pci_dev *dev)
+static void asus_hides_smbus_lpc(struct pci_dev *dev)
{
u16 val;
@@ -1042,8 +1069,14 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_0, asu
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_12, asus_hides_smbus_lpc );
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_12, asus_hides_smbus_lpc );
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801EB_0, asus_hides_smbus_lpc );
+DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_0, asus_hides_smbus_lpc );
+DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801BA_0, asus_hides_smbus_lpc );
+DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_0, asus_hides_smbus_lpc );
+DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_12, asus_hides_smbus_lpc );
+DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_12, asus_hides_smbus_lpc );
+DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801EB_0, asus_hides_smbus_lpc );
-static void __init asus_hides_smbus_lpc_ich6(struct pci_dev *dev)
+static void asus_hides_smbus_lpc_ich6(struct pci_dev *dev)
{
u32 val, rcba;
void __iomem *base;
@@ -1059,13 +1092,12 @@ static void __init asus_hides_smbus_lpc_ich6(struct pci_dev *dev)
printk(KERN_INFO "PCI: Enabled ICH6/i801 SMBus device\n");
}
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_1, asus_hides_smbus_lpc_ich6 );
-
-#endif
+DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_1, asus_hides_smbus_lpc_ich6 );
/*
* SiS 96x south bridge: BIOS typically hides SMBus device...
*/
-static void __init quirk_sis_96x_smbus(struct pci_dev *dev)
+static void quirk_sis_96x_smbus(struct pci_dev *dev)
{
u8 val = 0;
printk(KERN_INFO "Enabling SiS 96x SMBus.\n");
@@ -1086,7 +1118,7 @@ static int __devinitdata sis_96x_compatible = 0;
#define SIS_DETECT_REGISTER 0x40
-static void __init quirk_sis_503(struct pci_dev *dev)
+static void quirk_sis_503(struct pci_dev *dev)
{
u8 reg;
u16 devid;
@@ -1122,13 +1154,14 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_651, quirk_sis_96x_
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_735, quirk_sis_96x_compatible );
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_503, quirk_sis_503 );
+DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_503, quirk_sis_503 );
/*
* On ASUS A8V and A8V Deluxe boards, the onboard AC97 audio controller
* and MC97 modem controller are disabled when a second PCI soundcard is
* present. This patch, tweaking the VT8237 ISA bridge, enables them.
* -- bjd
*/
-static void __init asus_hides_ac97_lpc(struct pci_dev *dev)
+static void asus_hides_ac97_lpc(struct pci_dev *dev)
{
u8 val;
int asus_hides_ac97 = 0;
@@ -1159,6 +1192,14 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_962, quirk_sis_96x_
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_963, quirk_sis_96x_smbus );
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_LPC, quirk_sis_96x_smbus );
+DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237, asus_hides_ac97_lpc );
+
+
+DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_961, quirk_sis_96x_smbus );
+DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_962, quirk_sis_96x_smbus );
+DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_963, quirk_sis_96x_smbus );
+DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_LPC, quirk_sis_96x_smbus );
+
#if defined(CONFIG_ATA) || defined(CONFIG_ATA_MODULE)
/*
@@ -1167,7 +1208,7 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_LPC, quirk_sis_96x_
* the PCI scanning.
*/
-static void __devinit quirk_jmicron_dualfn(struct pci_dev *pdev)
+static void quirk_jmicron_dualfn(struct pci_dev *pdev)
{
u32 conf;
u8 hdr;
@@ -1205,6 +1246,7 @@ static void __devinit quirk_jmicron_dualfn(struct pci_dev *pdev)
}
DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_ANY_ID, quirk_jmicron_dualfn);
+DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_JMICRON, PCI_ANY_ID, quirk_jmicron_dualfn);
#endif
@@ -1532,6 +1574,8 @@ extern struct pci_fixup __start_pci_fixups_final[];
extern struct pci_fixup __end_pci_fixups_final[];
extern struct pci_fixup __start_pci_fixups_enable[];
extern struct pci_fixup __end_pci_fixups_enable[];
+extern struct pci_fixup __start_pci_fixups_resume[];
+extern struct pci_fixup __end_pci_fixups_resume[];
void pci_fixup_device(enum pci_fixup_pass pass, struct pci_dev *dev)
@@ -1559,6 +1603,11 @@ void pci_fixup_device(enum pci_fixup_pass pass, struct pci_dev *dev)
end = __end_pci_fixups_enable;
break;
+ case pci_fixup_resume:
+ start = __start_pci_fixups_resume;
+ end = __end_pci_fixups_resume;
+ break;
+
default:
/* stupid compiler warning, you would think with an enum... */
return;
@@ -1596,7 +1645,7 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x1460, quirk_p64h2_1k_io);
* Force it to be linked by setting the corresponding control bit in the
* config space.
*/
-static void __devinit quirk_nvidia_ck804_pcie_aer_ext_cap(struct pci_dev *dev)
+static void quirk_nvidia_ck804_pcie_aer_ext_cap(struct pci_dev *dev)
{
uint8_t b;
if (pci_read_config_byte(dev, 0xf41, &b) == 0) {
@@ -1610,6 +1659,8 @@ static void __devinit quirk_nvidia_ck804_pcie_aer_ext_cap(struct pci_dev *dev)
}
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_CK804_PCIE,
quirk_nvidia_ck804_pcie_aer_ext_cap);
+DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_CK804_PCIE,
+ quirk_nvidia_ck804_pcie_aer_ext_cap);
#ifdef CONFIG_PCI_MSI
/* To disable MSI globally */
diff --git a/drivers/pci/search.c b/drivers/pci/search.c
index 2bbafe0f79b..45f2b20ef51 100644
--- a/drivers/pci/search.c
+++ b/drivers/pci/search.c
@@ -416,7 +416,7 @@ exit:
const struct pci_device_id *pci_find_present(const struct pci_device_id *ids)
{
struct pci_dev *dev;
- struct pci_device_id * found = NULL;
+ const struct pci_device_id *found = NULL;
WARN_ON(in_interrupt());
down_read(&pci_bus_sem);
@@ -442,7 +442,6 @@ const struct pci_device_id *pci_find_present(const struct pci_device_id *ids)
* find devices that are usually built into a system, or for a general hint as
* to if another device happens to be present at this specific moment in time.
*/
-
int pci_dev_present(const struct pci_device_id *ids)
{
return pci_find_present(ids) == NULL ? 0 : 1;
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-14 15:11:15 +0000