diff options
Diffstat (limited to 'drivers/pci')
| -rw-r--r-- | drivers/pci/access.c | 14 | ||||
| -rw-r--r-- | drivers/pci/pci-sysfs.c | 2 | ||||
| -rw-r--r-- | drivers/pci/pci.h | 2 | ||||
| -rw-r--r-- | drivers/pci/quirks.c | 42 |
4 files changed, 48 insertions, 12 deletions
diff --git a/drivers/pci/access.c b/drivers/pci/access.c index ec8f7002b09..39bb96b413e 100644 --- a/drivers/pci/access.c +++ b/drivers/pci/access.c @@ -178,8 +178,7 @@ static int pci_vpd_pci22_read(struct pci_dev *dev, int pos, int size, int ret; int begin, end, i; - if (pos < 0 || pos > PCI_VPD_PCI22_SIZE || - size > PCI_VPD_PCI22_SIZE - pos) + if (pos < 0 || pos > vpd->base.len || size > vpd->base.len - pos) return -EINVAL; if (size == 0) return 0; @@ -223,8 +222,8 @@ static int pci_vpd_pci22_write(struct pci_dev *dev, int pos, int size, u32 val; int ret; - if (pos < 0 || pos > PCI_VPD_PCI22_SIZE || pos & 3 || - size > PCI_VPD_PCI22_SIZE - pos || size < 4) + if (pos < 0 || pos > vpd->base.len || pos & 3 || + size > vpd->base.len - pos || size < 4) return -EINVAL; val = (u8) *buf++; @@ -255,11 +254,6 @@ out: return 4; } -static int pci_vpd_pci22_get_size(struct pci_dev *dev) -{ - return PCI_VPD_PCI22_SIZE; -} - static void pci_vpd_pci22_release(struct pci_dev *dev) { kfree(container_of(dev->vpd, struct pci_vpd_pci22, base)); @@ -268,7 +262,6 @@ static void pci_vpd_pci22_release(struct pci_dev *dev) static struct pci_vpd_ops pci_vpd_pci22_ops = { .read = pci_vpd_pci22_read, .write = pci_vpd_pci22_write, - .get_size = pci_vpd_pci22_get_size, .release = pci_vpd_pci22_release, }; @@ -284,6 +277,7 @@ int pci_vpd_pci22_init(struct pci_dev *dev) if (!vpd) return -ENOMEM; + vpd->base.len = PCI_VPD_PCI22_SIZE; vpd->base.ops = &pci_vpd_pci22_ops; spin_lock_init(&vpd->lock); vpd->cap = cap; diff --git a/drivers/pci/pci-sysfs.c b/drivers/pci/pci-sysfs.c index 1f855f028e9..9c718583a23 100644 --- a/drivers/pci/pci-sysfs.c +++ b/drivers/pci/pci-sysfs.c @@ -736,7 +736,7 @@ int __must_check pci_create_sysfs_dev_files (struct pci_dev *pdev) attr = kzalloc(sizeof(*attr), GFP_ATOMIC); if (attr) { pdev->vpd->attr = attr; - attr->size = pdev->vpd->ops->get_size(pdev); + attr->size = pdev->vpd->len; attr->attr.name = "vpd"; attr->attr.mode = S_IRUSR | S_IWUSR; attr->read = pci_read_vpd; diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h index 0a497c1b422..00408c97e5f 100644 --- a/drivers/pci/pci.h +++ b/drivers/pci/pci.h @@ -21,11 +21,11 @@ extern int pci_user_write_config_dword(struct pci_dev *dev, int where, u32 val); struct pci_vpd_ops { int (*read)(struct pci_dev *dev, int pos, int size, char *buf); int (*write)(struct pci_dev *dev, int pos, int size, const char *buf); - int (*get_size)(struct pci_dev *dev); void (*release)(struct pci_dev *dev); }; struct pci_vpd { + unsigned int len; struct pci_vpd_ops *ops; struct bin_attribute *attr; /* descriptor for sysfs VPD entry */ }; diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c index dabb563f51d..a3497dc6ebc 100644 --- a/drivers/pci/quirks.c +++ b/drivers/pci/quirks.c @@ -1670,6 +1670,48 @@ static void __devinit quirk_via_cx700_pci_parking_caching(struct pci_dev *dev) } DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_VIA, 0x324e, quirk_via_cx700_pci_parking_caching); +/* + * For Broadcom 5706, 5708, 5709 rev. A nics, any read beyond the + * VPD end tag will hang the device. This problem was initially + * observed when a vpd entry was created in sysfs + * ('/sys/bus/pci/devices/<id>/vpd'). A read to this sysfs entry + * will dump 32k of data. Reading a full 32k will cause an access + * beyond the VPD end tag causing the device to hang. Once the device + * is hung, the bnx2 driver will not be able to reset the device. + * We believe that it is legal to read beyond the end tag and + * therefore the solution is to limit the read/write length. + */ +static void __devinit quirk_brcm_570x_limit_vpd(struct pci_dev *dev) +{ + /* Only disable the VPD capability for 5706, 5708, and 5709 rev. A */ + if ((dev->device == PCI_DEVICE_ID_NX2_5706) || + (dev->device == PCI_DEVICE_ID_NX2_5708) || + ((dev->device == PCI_DEVICE_ID_NX2_5709) && + (dev->revision & 0xf0) == 0x0)) { + if (dev->vpd) + dev->vpd->len = 0x80; + } +} + +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_BROADCOM, + PCI_DEVICE_ID_NX2_5706, + quirk_brcm_570x_limit_vpd); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_BROADCOM, + PCI_DEVICE_ID_NX2_5706S, + quirk_brcm_570x_limit_vpd); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_BROADCOM, + PCI_DEVICE_ID_NX2_5708, + quirk_brcm_570x_limit_vpd); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_BROADCOM, + PCI_DEVICE_ID_NX2_5708S, + quirk_brcm_570x_limit_vpd); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_BROADCOM, + PCI_DEVICE_ID_NX2_5709, + quirk_brcm_570x_limit_vpd); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_BROADCOM, + PCI_DEVICE_ID_NX2_5709S, + quirk_brcm_570x_limit_vpd); + #ifdef CONFIG_PCI_MSI /* Some chipsets do not support MSI. We cannot easily rely on setting * PCI_BUS_FLAGS_NO_MSI in its bus flags because there are actually |