diff options
Diffstat (limited to 'drivers/s390/crypto/z90main.c')
| -rw-r--r-- | drivers/s390/crypto/z90main.c | 3379 |
1 files changed, 0 insertions, 3379 deletions
diff --git a/drivers/s390/crypto/z90main.c b/drivers/s390/crypto/z90main.c deleted file mode 100644 index b2f20ab8431..00000000000 --- a/drivers/s390/crypto/z90main.c +++ /dev/null @@ -1,3379 +0,0 @@ -/* - * linux/drivers/s390/crypto/z90main.c - * - * z90crypt 1.3.3 - * - * Copyright (C) 2001, 2005 IBM Corporation - * Author(s): Robert Burroughs (burrough@us.ibm.com) - * Eric Rossman (edrossma@us.ibm.com) - * - * Hotplug & misc device support: Jochen Roehrig (roehrig@de.ibm.com) - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2, or (at your option) - * any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#include <asm/uaccess.h> // copy_(from|to)_user -#include <linux/compat.h> -#include <linux/compiler.h> -#include <linux/delay.h> // mdelay -#include <linux/init.h> -#include <linux/interrupt.h> // for tasklets -#include <linux/miscdevice.h> -#include <linux/module.h> -#include <linux/moduleparam.h> -#include <linux/proc_fs.h> -#include <linux/syscalls.h> -#include "z90crypt.h" -#include "z90common.h" - -/** - * Defaults that may be modified. - */ - -/** - * You can specify a different minor at compile time. - */ -#ifndef Z90CRYPT_MINOR -#define Z90CRYPT_MINOR MISC_DYNAMIC_MINOR -#endif - -/** - * You can specify a different domain at compile time or on the insmod - * command line. - */ -#ifndef DOMAIN_INDEX -#define DOMAIN_INDEX -1 -#endif - -/** - * This is the name under which the device is registered in /proc/modules. - */ -#define REG_NAME "z90crypt" - -/** - * Cleanup should run every CLEANUPTIME seconds and should clean up requests - * older than CLEANUPTIME seconds in the past. - */ -#ifndef CLEANUPTIME -#define CLEANUPTIME 15 -#endif - -/** - * Config should run every CONFIGTIME seconds - */ -#ifndef CONFIGTIME -#define CONFIGTIME 30 -#endif - -/** - * The first execution of the config task should take place - * immediately after initialization - */ -#ifndef INITIAL_CONFIGTIME -#define INITIAL_CONFIGTIME 1 -#endif - -/** - * Reader should run every READERTIME milliseconds - * With the 100Hz patch for s390, z90crypt can lock the system solid while - * under heavy load. We'll try to avoid that. - */ -#ifndef READERTIME -#if HZ > 1000 -#define READERTIME 2 -#else -#define READERTIME 10 -#endif -#endif - -/** - * turn long device array index into device pointer - */ -#define LONG2DEVPTR(ndx) (z90crypt.device_p[(ndx)]) - -/** - * turn short device array index into long device array index - */ -#define SHRT2LONG(ndx) (z90crypt.overall_device_x.device_index[(ndx)]) - -/** - * turn short device array index into device pointer - */ -#define SHRT2DEVPTR(ndx) LONG2DEVPTR(SHRT2LONG(ndx)) - -/** - * Status for a work-element - */ -#define STAT_DEFAULT 0x00 // request has not been processed - -#define STAT_ROUTED 0x80 // bit 7: requests get routed to specific device - // else, device is determined each write -#define STAT_FAILED 0x40 // bit 6: this bit is set if the request failed - // before being sent to the hardware. -#define STAT_WRITTEN 0x30 // bits 5-4: work to be done, not sent to device -// 0x20 // UNUSED state -#define STAT_READPEND 0x10 // bits 5-4: work done, we're returning data now -#define STAT_NOWORK 0x00 // bits off: no work on any queue -#define STAT_RDWRMASK 0x30 // mask for bits 5-4 - -/** - * Macros to check the status RDWRMASK - */ -#define CHK_RDWRMASK(statbyte) ((statbyte) & STAT_RDWRMASK) -#define SET_RDWRMASK(statbyte, newval) \ - {(statbyte) &= ~STAT_RDWRMASK; (statbyte) |= newval;} - -/** - * Audit Trail. Progress of a Work element - * audit[0]: Unless noted otherwise, these bits are all set by the process - */ -#define FP_COPYFROM 0x80 // Caller's buffer has been copied to work element -#define FP_BUFFREQ 0x40 // Low Level buffer requested -#define FP_BUFFGOT 0x20 // Low Level buffer obtained -#define FP_SENT 0x10 // Work element sent to a crypto device - // (may be set by process or by reader task) -#define FP_PENDING 0x08 // Work element placed on pending queue - // (may be set by process or by reader task) -#define FP_REQUEST 0x04 // Work element placed on request queue -#define FP_ASLEEP 0x02 // Work element about to sleep -#define FP_AWAKE 0x01 // Work element has been awakened - -/** - * audit[1]: These bits are set by the reader task and/or the cleanup task - */ -#define FP_NOTPENDING 0x80 // Work element removed from pending queue -#define FP_AWAKENING 0x40 // Caller about to be awakened -#define FP_TIMEDOUT 0x20 // Caller timed out -#define FP_RESPSIZESET 0x10 // Response size copied to work element -#define FP_RESPADDRCOPIED 0x08 // Response address copied to work element -#define FP_RESPBUFFCOPIED 0x04 // Response buffer copied to work element -#define FP_REMREQUEST 0x02 // Work element removed from request queue -#define FP_SIGNALED 0x01 // Work element was awakened by a signal - -/** - * audit[2]: unused - */ - -/** - * state of the file handle in private_data.status - */ -#define STAT_OPEN 0 -#define STAT_CLOSED 1 - -/** - * PID() expands to the process ID of the current process - */ -#define PID() (current->pid) - -/** - * Selected Constants. The number of APs and the number of devices - */ -#ifndef Z90CRYPT_NUM_APS -#define Z90CRYPT_NUM_APS 64 -#endif -#ifndef Z90CRYPT_NUM_DEVS -#define Z90CRYPT_NUM_DEVS Z90CRYPT_NUM_APS -#endif - -/** - * Buffer size for receiving responses. The maximum Response Size - * is actually the maximum request size, since in an error condition - * the request itself may be returned unchanged. - */ -#define MAX_RESPONSE_SIZE 0x0000077C - -/** - * A count and status-byte mask - */ -struct status { - int st_count; // # of enabled devices - int disabled_count; // # of disabled devices - int user_disabled_count; // # of devices disabled via proc fs - unsigned char st_mask[Z90CRYPT_NUM_APS]; // current status mask -}; - -/** - * The array of device indexes is a mechanism for fast indexing into - * a long (and sparse) array. For instance, if APs 3, 9 and 47 are - * installed, z90CDeviceIndex[0] is 3, z90CDeviceIndex[1] is 9, and - * z90CDeviceIndex[2] is 47. - */ -struct device_x { - int device_index[Z90CRYPT_NUM_DEVS]; -}; - -/** - * All devices are arranged in a single array: 64 APs - */ -struct device { - int dev_type; // PCICA, PCICC, PCIXCC_MCL2, - // PCIXCC_MCL3, CEX2C, CEX2A - enum devstat dev_stat; // current device status - int dev_self_x; // Index in array - int disabled; // Set when device is in error - int user_disabled; // Set when device is disabled by user - int dev_q_depth; // q depth - unsigned char * dev_resp_p; // Response buffer address - int dev_resp_l; // Response Buffer length - int dev_caller_count; // Number of callers - int dev_total_req_cnt; // # requests for device since load - struct list_head dev_caller_list; // List of callers -}; - -/** - * There's a struct status and a struct device_x for each device type. - */ -struct hdware_block { - struct status hdware_mask; - struct status type_mask[Z90CRYPT_NUM_TYPES]; - struct device_x type_x_addr[Z90CRYPT_NUM_TYPES]; - unsigned char device_type_array[Z90CRYPT_NUM_APS]; -}; - -/** - * z90crypt is the topmost data structure in the hierarchy. - */ -struct z90crypt { - int max_count; // Nr of possible crypto devices - struct status mask; - int q_depth_array[Z90CRYPT_NUM_DEVS]; - int dev_type_array[Z90CRYPT_NUM_DEVS]; - struct device_x overall_device_x; // array device indexes - struct device * device_p[Z90CRYPT_NUM_DEVS]; - int terminating; - int domain_established;// TRUE: domain has been found - int cdx; // Crypto Domain Index - int len; // Length of this data structure - struct hdware_block *hdware_info; -}; - -/** - * An array of these structures is pointed to from dev_caller - * The length of the array depends on the device type. For APs, - * there are 8. - * - * The caller buffer is allocated to the user at OPEN. At WRITE, - * it contains the request; at READ, the response. The function - * send_to_crypto_device converts the request to device-dependent - * form and use the caller's OPEN-allocated buffer for the response. - * - * For the contents of caller_dev_dep_req and caller_dev_dep_req_p - * because that points to it, see the discussion in z90hardware.c. - * Search for "extended request message block". - */ -struct caller { - int caller_buf_l; // length of original request - unsigned char * caller_buf_p; // Original request on WRITE - int caller_dev_dep_req_l; // len device dependent request - unsigned char * caller_dev_dep_req_p; // Device dependent form - unsigned char caller_id[8]; // caller-supplied message id - struct list_head caller_liste; - unsigned char caller_dev_dep_req[MAX_RESPONSE_SIZE]; -}; - -/** - * Function prototypes from z90hardware.c - */ -enum hdstat query_online(int deviceNr, int cdx, int resetNr, int *q_depth, - int *dev_type); -enum devstat reset_device(int deviceNr, int cdx, int resetNr); -enum devstat send_to_AP(int dev_nr, int cdx, int msg_len, unsigned char *msg_ext); -enum devstat receive_from_AP(int dev_nr, int cdx, int resplen, - unsigned char *resp, unsigned char *psmid); -int convert_request(unsigned char *buffer, int func, unsigned short function, - int cdx, int dev_type, int *msg_l_p, unsigned char *msg_p); -int convert_response(unsigned char *response, unsigned char *buffer, - int *respbufflen_p, unsigned char *resp_buff); - -/** - * Low level function prototypes - */ -static int create_z90crypt(int *cdx_p); -static int refresh_z90crypt(int *cdx_p); -static int find_crypto_devices(struct status *deviceMask); -static int create_crypto_device(int index); -static int destroy_crypto_device(int index); -static void destroy_z90crypt(void); -static int refresh_index_array(struct status *status_str, - struct device_x *index_array); -static int probe_device_type(struct device *devPtr); -static int probe_PCIXCC_type(struct device *devPtr); - -/** - * proc fs definitions - */ -static struct proc_dir_entry *z90crypt_entry; - -/** - * data structures - */ - -/** - * work_element.opener points back to this structure - */ -struct priv_data { - pid_t opener_pid; - unsigned char status; // 0: open 1: closed -}; - -/** - * A work element is allocated for each request - */ -struct work_element { - struct priv_data *priv_data; - pid_t pid; - int devindex; // index of device processing this w_e - // (If request did not specify device, - // -1 until placed onto a queue) - int devtype; - struct list_head liste; // used for requestq and pendingq - char buffer[128]; // local copy of user request - int buff_size; // size of the buffer for the request - char resp_buff[RESPBUFFSIZE]; - int resp_buff_size; - char __user * resp_addr; // address of response in user space - unsigned int funccode; // function code of request - wait_queue_head_t waitq; - unsigned long requestsent; // time at which the request was sent - atomic_t alarmrung; // wake-up signal - unsigned char caller_id[8]; // pid + counter, for this w_e - unsigned char status[1]; // bits to mark status of the request - unsigned char audit[3]; // record of work element's progress - unsigned char * requestptr; // address of request buffer - int retcode; // return code of request -}; - -/** - * High level function prototypes - */ -static int z90crypt_open(struct inode *, struct file *); -static int z90crypt_release(struct inode *, struct file *); -static ssize_t z90crypt_read(struct file *, char __user *, size_t, loff_t *); -static ssize_t z90crypt_write(struct file *, const char __user *, - size_t, loff_t *); -static long z90crypt_unlocked_ioctl(struct file *, unsigned int, unsigned long); -static long z90crypt_compat_ioctl(struct file *, unsigned int, unsigned long); - -static void z90crypt_reader_task(unsigned long); -static void z90crypt_schedule_reader_task(unsigned long); -static void z90crypt_config_task(unsigned long); -static void z90crypt_cleanup_task(unsigned long); - -static int z90crypt_status(char *, char **, off_t, int, int *, void *); -static int z90crypt_status_write(struct file *, const char __user *, - unsigned long, void *); - -/** - * Storage allocated at initialization and used throughout the life of - * this insmod - */ -static int domain = DOMAIN_INDEX; -static struct z90crypt z90crypt; -static int quiesce_z90crypt; -static spinlock_t queuespinlock; -static struct list_head request_list; -static int requestq_count; -static struct list_head pending_list; -static int pendingq_count; - -static struct tasklet_struct reader_tasklet; -static struct timer_list reader_timer; -static struct timer_list config_timer; -static struct timer_list cleanup_timer; -static atomic_t total_open; -static atomic_t z90crypt_step; - -static struct file_operations z90crypt_fops = { - .owner = THIS_MODULE, - .read = z90crypt_read, - .write = z90crypt_write, - .unlocked_ioctl = z90crypt_unlocked_ioctl, -#ifdef CONFIG_COMPAT - .compat_ioctl = z90crypt_compat_ioctl, -#endif - .open = z90crypt_open, - .release = z90crypt_release -}; - -static struct miscdevice z90crypt_misc_device = { - .minor = Z90CRYPT_MINOR, - .name = DEV_NAME, - .fops = &z90crypt_fops, -}; - -/** - * Documentation values. - */ -MODULE_AUTHOR("zSeries Linux Crypto Team: Robert H. Burroughs, Eric D. Rossman" - "and Jochen Roehrig"); -MODULE_DESCRIPTION("zSeries Linux Cryptographic Coprocessor device driver, " - "Copyright 2001, 2005 IBM Corporation"); -MODULE_LICENSE("GPL"); -module_param(domain, int, 0); -MODULE_PARM_DESC(domain, "domain index for device"); - -#ifdef CONFIG_COMPAT -/** - * ioctl32 conversion routines - */ -struct ica_rsa_modexpo_32 { // For 32-bit callers - compat_uptr_t inputdata; - unsigned int inputdatalength; - compat_uptr_t outputdata; - unsigned int outputdatalength; - compat_uptr_t b_key; - compat_uptr_t n_modulus; -}; - -static long -trans_modexpo32(struct file *filp, unsigned int cmd, unsigned long arg) -{ - struct ica_rsa_modexpo_32 __user *mex32u = compat_ptr(arg); - struct ica_rsa_modexpo_32 mex32k; - struct ica_rsa_modexpo __user *mex64; - long ret = 0; - unsigned int i; - - if (!access_ok(VERIFY_WRITE, mex32u, sizeof(struct ica_rsa_modexpo_32))) - return -EFAULT; - mex64 = compat_alloc_user_space(sizeof(struct ica_rsa_modexpo)); - if (!access_ok(VERIFY_WRITE, mex64, sizeof(struct ica_rsa_modexpo))) - return -EFAULT; - if (copy_from_user(&mex32k, mex32u, sizeof(struct ica_rsa_modexpo_32))) - return -EFAULT; - if (__put_user(compat_ptr(mex32k.inputdata), &mex64->inputdata) || - __put_user(mex32k.inputdatalength, &mex64->inputdatalength) || - __put_user(compat_ptr(mex32k.outputdata), &mex64->outputdata) || - __put_user(mex32k.outputdatalength, &mex64->outputdatalength) || - __put_user(compat_ptr(mex32k.b_key), &mex64->b_key) || - __put_user(compat_ptr(mex32k.n_modulus), &mex64->n_modulus)) - return -EFAULT; - ret = z90crypt_unlocked_ioctl(filp, cmd, (unsigned long)mex64); - if (!ret) - if (__get_user(i, &mex64->outputdatalength) || - __put_user(i, &mex32u->outputdatalength)) - ret = -EFAULT; - return ret; -} - -struct ica_rsa_modexpo_crt_32 { // For 32-bit callers - compat_uptr_t inputdata; - unsigned int inputdatalength; - compat_uptr_t outputdata; - unsigned int outputdatalength; - compat_uptr_t bp_key; - compat_uptr_t bq_key; - compat_uptr_t np_prime; - compat_uptr_t nq_prime; - compat_uptr_t u_mult_inv; -}; - -static long -trans_modexpo_crt32(struct file *filp, unsigned int cmd, unsigned long arg) -{ - struct ica_rsa_modexpo_crt_32 __user *crt32u = compat_ptr(arg); - struct ica_rsa_modexpo_crt_32 crt32k; - struct ica_rsa_modexpo_crt __user *crt64; - long ret = 0; - unsigned int i; - - if (!access_ok(VERIFY_WRITE, crt32u, - sizeof(struct ica_rsa_modexpo_crt_32))) - return -EFAULT; - crt64 = compat_alloc_user_space(sizeof(struct ica_rsa_modexpo_crt)); - if (!access_ok(VERIFY_WRITE, crt64, sizeof(struct ica_rsa_modexpo_crt))) - return -EFAULT; - if (copy_from_user(&crt32k, crt32u, - sizeof(struct ica_rsa_modexpo_crt_32))) - return -EFAULT; - if (__put_user(compat_ptr(crt32k.inputdata), &crt64->inputdata) || - __put_user(crt32k.inputdatalength, &crt64->inputdatalength) || - __put_user(compat_ptr(crt32k.outputdata), &crt64->outputdata) || - __put_user(crt32k.outputdatalength, &crt64->outputdatalength) || - __put_user(compat_ptr(crt32k.bp_key), &crt64->bp_key) || - __put_user(compat_ptr(crt32k.bq_key), &crt64->bq_key) || - __put_user(compat_ptr(crt32k.np_prime), &crt64->np_prime) || - __put_user(compat_ptr(crt32k.nq_prime), &crt64->nq_prime) || - __put_user(compat_ptr(crt32k.u_mult_inv), &crt64->u_mult_inv)) - return -EFAULT; - ret = z90crypt_unlocked_ioctl(filp, cmd, (unsigned long)crt64); - if (!ret) - if (__get_user(i, &crt64->outputdatalength) || - __put_user(i, &crt32u->outputdatalength)) - ret = -EFAULT; - return ret; -} - -static long -z90crypt_compat_ioctl(struct file *filp, unsigned int cmd, unsigned long arg) -{ - switch (cmd) { - case ICAZ90STATUS: - case Z90QUIESCE: - case Z90STAT_TOTALCOUNT: - case Z90STAT_PCICACOUNT: - case Z90STAT_PCICCCOUNT: - case Z90STAT_PCIXCCCOUNT: - case Z90STAT_PCIXCCMCL2COUNT: - case Z90STAT_PCIXCCMCL3COUNT: - case Z90STAT_CEX2CCOUNT: - case Z90STAT_REQUESTQ_COUNT: - case Z90STAT_PENDINGQ_COUNT: - case Z90STAT_TOTALOPEN_COUNT: - case Z90STAT_DOMAIN_INDEX: - case Z90STAT_STATUS_MASK: - case Z90STAT_QDEPTH_MASK: - case Z90STAT_PERDEV_REQCNT: - return z90crypt_unlocked_ioctl(filp, cmd, arg); - case ICARSAMODEXPO: - return trans_modexpo32(filp, cmd, arg); - case ICARSACRT: - return trans_modexpo_crt32(filp, cmd, arg); - default: - return -ENOIOCTLCMD; - } -} -#endif - -/** - * The module initialization code. - */ -static int __init -z90crypt_init_module(void) -{ - int result, nresult; - struct proc_dir_entry *entry; - - PDEBUG("PID %d\n", PID()); - - if ((domain < -1) || (domain > 15)) { - PRINTKW("Invalid param: domain = %d. Not loading.\n", domain); - return -EINVAL; - } - - /* Register as misc device with given minor (or get a dynamic one). */ - result = misc_register(&z90crypt_misc_device); - if (result < 0) { - PRINTKW(KERN_ERR "misc_register (minor %d) failed with %d\n", - z90crypt_misc_device.minor, result); - return result; - } - - PDEBUG("Registered " DEV_NAME " with result %d\n", result); - - result = create_z90crypt(&domain); - if (result != 0) { - PRINTKW("create_z90crypt (domain index %d) failed with %d.\n", - domain, result); - result = -ENOMEM; - goto init_module_cleanup; - } - - if (result == 0) { - PRINTKN("Version %d.%d.%d loaded, built on %s %s\n", - z90crypt_VERSION, z90crypt_RELEASE, z90crypt_VARIANT, - __DATE__, __TIME__); - PDEBUG("create_z90crypt (domain index %d) successful.\n", - domain); - } else - PRINTK("No devices at startup\n"); - - /* Initialize globals. */ - spin_lock_init(&queuespinlock); - - INIT_LIST_HEAD(&pending_list); - pendingq_count = 0; - - INIT_LIST_HEAD(&request_list); - requestq_count = 0; - - quiesce_z90crypt = 0; - - atomic_set(&total_open, 0); - atomic_set(&z90crypt_step, 0); - - /* Set up the cleanup task. */ - init_timer(&cleanup_timer); - cleanup_timer.function = z90crypt_cleanup_task; - cleanup_timer.data = 0; - cleanup_timer.expires = jiffies + (CLEANUPTIME * HZ); - add_timer(&cleanup_timer); - - /* Set up the proc file system */ - entry = create_proc_entry("driver/z90crypt", 0644, 0); - if (entry) { - entry->nlink = 1; - entry->data = 0; - entry->read_proc = z90crypt_status; - entry->write_proc = z90crypt_status_write; - } - else - PRINTK("Couldn't create z90crypt proc entry\n"); - z90crypt_entry = entry; - - /* Set up the configuration task. */ - init_timer(&config_timer); - config_timer.function = z90crypt_config_task; - config_timer.data = 0; - config_timer.expires = jiffies + (INITIAL_CONFIGTIME * HZ); - add_timer(&config_timer); - - /* Set up the reader task */ - tasklet_init(&reader_tasklet, z90crypt_reader_task, 0); - init_timer(&reader_timer); - reader_timer.function = z90crypt_schedule_reader_task; - reader_timer.data = 0; - reader_timer.expires = jiffies + (READERTIME * HZ / 1000); - add_timer(&reader_timer); - - return 0; // success - -init_module_cleanup: - if ((nresult = misc_deregister(&z90crypt_misc_device))) - PRINTK("misc_deregister failed with %d.\n", nresult); - else - PDEBUG("misc_deregister successful.\n"); - - return result; // failure -} - -/** - * The module termination code - */ -static void __exit -z90crypt_cleanup_module(void) -{ - int nresult; - - PDEBUG("PID %d\n", PID()); - - remove_proc_entry("driver/z90crypt", 0); - - if ((nresult = misc_deregister(&z90crypt_misc_device))) - PRINTK("misc_deregister failed with %d.\n", nresult); - else - PDEBUG("misc_deregister successful.\n"); - - /* Remove the tasks */ - tasklet_kill(&reader_tasklet); - del_timer(&reader_timer); - del_timer(&config_timer); - del_timer(&cleanup_timer); - - destroy_z90crypt(); - - PRINTKN("Unloaded.\n"); -} - -/** - * Functions running under a process id - * - * The I/O functions: - * z90crypt_open - * z90crypt_release - * z90crypt_read - * z90crypt_write - * z90crypt_unlocked_ioctl - * z90crypt_status - * z90crypt_status_write - * disable_card - * enable_card - * - * Helper functions: - * z90crypt_rsa - * z90crypt_prepare - * z90crypt_send - * z90crypt_process_results - * - */ -static int -z90crypt_open(struct inode *inode, struct file *filp) -{ - struct priv_data *private_data_p; - - if (quiesce_z90crypt) - return -EQUIESCE; - - private_data_p = kzalloc(sizeof(struct priv_data), GFP_KERNEL); - if (!private_data_p) { - PRINTK("Memory allocate failed\n"); - return -ENOMEM; - } - - private_data_p->status = STAT_OPEN; - private_data_p->opener_pid = PID(); - filp->private_data = private_data_p; - atomic_inc(&total_open); - - return 0; -} - -static int -z90crypt_release(struct inode *inode, struct file *filp) -{ - struct priv_data *private_data_p = filp->private_data; - - PDEBUG("PID %d (filp %p)\n", PID(), filp); - - private_data_p->status = STAT_CLOSED; - memset(private_data_p, 0, sizeof(struct priv_data)); - kfree(private_data_p); - atomic_dec(&total_open); - - return 0; -} - -/* - * there are two read functions, of which compile options will choose one - * without USE_GET_RANDOM_BYTES - * => read() always returns -EPERM; - * otherwise - * => read() uses get_random_bytes() kernel function - */ -#ifndef USE_GET_RANDOM_BYTES -/** - * z90crypt_read will not be supported beyond z90crypt 1.3.1 - */ -static ssize_t -z90crypt_read(struct file *filp, char __user *buf, size_t count, loff_t *f_pos) -{ - PDEBUG("filp %p (PID %d)\n", filp, PID()); - return -EPERM; -} -#else // we want to use get_random_bytes -/** - * read() just returns a string of random bytes. Since we have no way - * to generate these cryptographically, we just execute get_random_bytes - * for the length specified. - */ -#include <linux/random.h> -static ssize_t -z90crypt_read(struct file *filp, char __user *buf, size_t count, loff_t *f_pos) -{ - unsigned char *temp_buff; - - PDEBUG("filp %p (PID %d)\n", filp, PID()); - - if (quiesce_z90crypt) - return -EQUIESCE; - if (count < 0) { - PRINTK("Requested random byte count negative: %ld\n", count); - return -EINVAL; - } - if (count > RESPBUFFSIZE) { - PDEBUG("count[%d] > RESPBUFFSIZE", count); - return -EINVAL; - } - if (count == 0) - return 0; - temp_buff = kmalloc(RESPBUFFSIZE, GFP_KERNEL); - if (!temp_buff) { - PRINTK("Memory allocate failed\n"); - return -ENOMEM; - } - get_random_bytes(temp_buff, count); - - if (copy_to_user(buf, temp_buff, count) != 0) { - kfree(temp_buff); - return -EFAULT; - } - kfree(temp_buff); - return count; -} -#endif - -/** - * Write is is not allowed - */ -static ssize_t -z90crypt_write(struct file *filp, const char __user *buf, size_t count, loff_t *f_pos) -{ - PDEBUG("filp %p (PID %d)\n", filp, PID()); - return -EPERM; -} - -/** - * New status functions - */ -static inline int -get_status_totalcount(void) -{ - return z90crypt.hdware_info->hdware_mask.st_count; -} - -static inline int -get_status_PCICAcount(void) -{ - return z90crypt.hdware_info->type_mask[PCICA].st_count; -} - -static inline int -get_status_PCICCcount(void) -{ - return z90crypt.hdware_info->type_mask[PCICC].st_count; -} - -static inline int -get_status_PCIXCCcount(void) -{ - return z90crypt.hdware_info->type_mask[PCIXCC_MCL2].st_count + - z90crypt.hdware_info->type_mask[PCIXCC_MCL3].st_count; -} - -static inline int -get_status_PCIXCCMCL2count(void) -{ - return z90crypt.hdware_info->type_mask[PCIXCC_MCL2].st_count; -} - -static inline int -get_status_PCIXCCMCL3count(void) -{ - return z90crypt.hdware_info->type_mask[PCIXCC_MCL3].st_count; -} - -static inline int -get_status_CEX2Ccount(void) -{ - return z90crypt.hdware_info->type_mask[CEX2C].st_count; -} - -static inline int -get_status_CEX2Acount(void) -{ - return z90crypt.hdware_info->type_mask[CEX2A].st_count; -} - -static inline int -get_status_requestq_count(void) -{ - return requestq_count; -} - -static inline int -get_status_pendingq_count(void) -{ - return pendingq_count; -} - -static inline int -get_status_totalopen_count(void) -{ - return atomic_read(&total_open); -} - -static inline int -get_status_domain_index(void) -{ - return z90crypt.cdx; -} - -static inline unsigned char * -get_status_status_mask(unsigned char status[Z90CRYPT_NUM_APS]) -{ - int i, ix; - - memcpy(status, z90crypt.hdware_info->device_type_array, - Z90CRYPT_NUM_APS); - - for (i = 0; i < get_status_totalcount(); i++) { - ix = SHRT2LONG(i); - if (LONG2DEVPTR(ix)->user_disabled) - status[ix] = 0x0d; - } - - return status; -} - -static inline unsigned char * -get_status_qdepth_mask(unsigned char qdepth[Z90CRYPT_NUM_APS]) -{ - int i, ix; - - memset(qdepth, 0, Z90CRYPT_NUM_APS); - - for (i = 0; i < get_status_totalcount(); i++) { - ix = SHRT2LONG(i); - qdepth[ix] = LONG2DEVPTR(ix)->dev_caller_count; - } - - return qdepth; -} - -static inline unsigned int * -get_status_perdevice_reqcnt(unsigned int reqcnt[Z90CRYPT_NUM_APS]) -{ - int i, ix; - - memset(reqcnt, 0, Z90CRYPT_NUM_APS * sizeof(int)); - - for (i = 0; i < get_status_totalcount(); i++) { - ix = SHRT2LONG(i); - reqcnt[ix] = LONG2DEVPTR(ix)->dev_total_req_cnt; - } - - return reqcnt; -} - -static inline void -init_work_element(struct work_element *we_p, - struct priv_data *priv_data, pid_t pid) -{ - int step; - - we_p->requestptr = (unsigned char *)we_p + sizeof(struct work_element); - /* Come up with a unique id for this caller. */ - step = atomic_inc_return(&z90crypt_step); - memcpy(we_p->caller_id+0, (void *) &pid, sizeof(pid)); - memcpy(we_p->caller_id+4, (void *) &step, sizeof(step)); - we_p->pid = pid; - we_p->priv_data = priv_data; - we_p->status[0] = STAT_DEFAULT; - we_p->audit[0] = 0x00; - we_p->audit[1] = 0x00; - we_p->audit[2] = 0x00; - we_p->resp_buff_size = 0; - we_p->retcode = 0; - we_p->devindex = -1; - we_p->devtype = -1; - atomic_set(&we_p->alarmrung, 0); - init_waitqueue_head(&we_p->waitq); - INIT_LIST_HEAD(&(we_p->liste)); -} - -static inline int -allocate_work_element(struct work_element **we_pp, - struct priv_data *priv_data_p, pid_t pid) -{ - struct work_element *we_p; - - we_p = (struct work_element *) get_zeroed_page(GFP_KERNEL); - if (!we_p) - return -ENOMEM; - init_work_element(we_p, priv_data_p, pid); - *we_pp = we_p; - return 0; -} - -static inline void -remove_device(struct device *device_p) -{ - if (!device_p || (device_p->disabled != 0)) - return; - device_p->disabled = 1; - z90crypt.hdware_info->type_mask[device_p->dev_type].disabled_count++; - z90crypt.hdware_info->hdware_mask.disabled_count++; -} - -/** - * Bitlength limits for each card - * - * There are new MCLs which allow more bitlengths. See the table for details. - * The MCL must be applied and the newer bitlengths enabled for these to work. - * - * Card Type Old limit New limit - * PCICA ??-2048 same (the lower limit is less than 128 bit...) - * PCICC 512-1024 512-2048 - * PCIXCC_MCL2 512-2048 ----- (applying any GA LIC will make an MCL3 card) - * PCIXCC_MCL3 ----- 128-2048 - * CEX2C 512-2048 128-2048 - * CEX2A ??-2048 same (the lower limit is less than 128 bit...) - * - * ext_bitlens (extended bitlengths) is a global, since you should not apply an - * MCL to just one card in a machine. We assume, at first, that all cards have - * these capabilities. - */ -int ext_bitlens = 1; // This is global -#define PCIXCC_MIN_MOD_SIZE 16 // 128 bits -#define OLD_PCIXCC_MIN_MOD_SIZE 64 // 512 bits -#define PCICC_MIN_MOD_SIZE 64 // 512 bits -#define OLD_PCICC_MAX_MOD_SIZE 128 // 1024 bits -#define MAX_MOD_SIZE 256 // 2048 bits - -static inline int -select_device_type(int *dev_type_p, int bytelength) -{ - static int count = 0; - int PCICA_avail, PCIXCC_MCL3_avail, CEX2C_avail, CEX2A_avail, - index_to_use; - struct status *stat; - if ((*dev_type_p != PCICC) && (*dev_type_p != PCICA) && - (*dev_type_p != PCIXCC_MCL2) && (*dev_type_p != PCIXCC_MCL3) && - (*dev_type_p != CEX2C) && (*dev_type_p != CEX2A) && - (*dev_type_p != ANYDEV)) - return -1; - if (*dev_type_p != ANYDEV) { - stat = &z90crypt.hdware_info->type_mask[*dev_type_p]; - if (stat->st_count > - (stat->disabled_count + stat->user_disabled_count)) - return 0; - return -1; - } - - /** - * Assumption: PCICA, PCIXCC_MCL3, CEX2C, and CEX2A are all similar in - * speed. - * - * PCICA and CEX2A do NOT co-exist, so it would be either one or the - * other present. - */ - stat = &z90crypt.hdware_info->type_mask[PCICA]; - PCICA_avail = stat->st_count - - (stat->disabled_count + stat->user_disabled_count); - stat = &z90crypt.hdware_info->type_mask[PCIXCC_MCL3]; - PCIXCC_MCL3_avail = stat->st_count - - (stat->disabled_count + stat->user_disabled_count); - stat = &z90crypt.hdware_info->type_mask[CEX2C]; - CEX2C_avail = stat->st_count - - (stat->disabled_count + stat->user_disabled_count); - stat = &z90crypt.hdware_info->type_mask[CEX2A]; - CEX2A_avail = stat->st_count - - (stat->disabled_count + stat->user_disabled_count); - if (PCICA_avail || PCIXCC_MCL3_avail || CEX2C_avail || CEX2A_avail) { - /** - * bitlength is a factor, PCICA or CEX2A are the most capable, - * even with the new MCL for PCIXCC. - */ - if ((bytelength < PCIXCC_MIN_MOD_SIZE) || - (!ext_bitlens && (bytelength < OLD_PCIXCC_MIN_MOD_SIZE))) { - if (PCICA_avail) { - *dev_type_p = PCICA; - return 0; - } - if (CEX2A_avail) { - *dev_type_p = CEX2A; - return 0; - } - return -1; - } - - index_to_use = count % (PCICA_avail + PCIXCC_MCL3_avail + - CEX2C_avail + CEX2A_avail); - if (index_to_use < PCICA_avail) - *dev_type_p = PCICA; - else if (index_to_use < (PCICA_avail + PCIXCC_MCL3_avail)) - *dev_type_p = PCIXCC_MCL3; - else if (index_to_use < (PCICA_avail + PCIXCC_MCL3_avail + - CEX2C_avail)) - *dev_type_p = CEX2C; - else - *dev_type_p = CEX2A; - count++; - return 0; - } - - /* Less than OLD_PCIXCC_MIN_MOD_SIZE cannot go to a PCIXCC_MCL2 */ - if (bytelength < OLD_PCIXCC_MIN_MOD_SIZE) - return -1; - stat = &z90crypt.hdware_info->type_mask[PCIXCC_MCL2]; - if (stat->st_count > - (stat->disabled_count + stat->user_disabled_count)) { - *dev_type_p = PCIXCC_MCL2; - return 0; - } - - /** - * Less than PCICC_MIN_MOD_SIZE or more than OLD_PCICC_MAX_MOD_SIZE - * (if we don't have the MCL applied and the newer bitlengths enabled) - * cannot go to a PCICC - */ - if ((bytelength < PCICC_MIN_MOD_SIZE) || - (!ext_bitlens && (bytelength > OLD_PCICC_MAX_MOD_SIZE))) { - return -1; - } - stat = &z90crypt.hdware_info->type_mask[PCICC]; - if (stat->st_count > - (stat->disabled_count + stat->user_disabled_count)) { - *dev_type_p = PCICC; - return 0; - } - - return -1; -} - -/** - * Try the selected number, then the selected type (can be ANYDEV) - */ -static inline int -select_device(int *dev_type_p, int *device_nr_p, int bytelength) -{ - int i, indx, devTp, low_count, low_indx; - struct device_x *index_p; - struct device *dev_ptr; - - PDEBUG("device type = %d, index = %d\n", *dev_type_p, *device_nr_p); - if ((*device_nr_p >= 0) && (*device_nr_p < Z90CRYPT_NUM_DEVS)) { - PDEBUG("trying index = %d\n", *device_nr_p); - dev_ptr = z90crypt.device_p[*device_nr_p]; - - if (dev_ptr && - (dev_ptr->dev_stat != DEV_GONE) && - (dev_ptr->disabled == 0) && - (dev_ptr->user_disabled == 0)) { - PDEBUG("selected by number, index = %d\n", - *device_nr_p); - *dev_type_p = dev_ptr->dev_type; - return *device_nr_p; - } - } - *device_nr_p = -1; - PDEBUG("trying type = %d\n", *dev_type_p); - devTp = *dev_type_p; - if (select_device_type(&devTp, bytelength) == -1) { - PDEBUG("failed to select by type\n"); - return -1; - } - PDEBUG("selected type = %d\n", devTp); - index_p = &z90crypt.hdware_info->type_x_addr[devTp]; - low_count = 0x0000FFFF; - low_indx = -1; - for (i = 0; i < z90crypt.hdware_info->type_mask[devTp].st_count; i++) { - indx = index_p->device_index[i]; - dev_ptr = z90crypt.device_p[indx]; - if (dev_ptr && - (dev_ptr->dev_stat != DEV_GONE) && - (dev_ptr->disabled == 0) && - (dev_ptr->user_disabled == 0) && - (devTp == dev_ptr->dev_type) && - (low_count > dev_ptr->dev_caller_count)) { - low_count = dev_ptr->dev_caller_count; - low_indx = indx; - } - } - *device_nr_p = low_indx; - return low_indx; -} - -static inline int -send_to_crypto_device(struct work_element *we_p) -{ - struct caller *caller_p; - struct device *device_p; - int dev_nr; - int bytelen = ((struct ica_rsa_modexpo *)we_p->buffer)->inputdatalength; - - if (!we_p->requestptr) - return SEN_FATAL_ERROR; - caller_p = (struct caller *)we_p->requestptr; - dev_nr = we_p->devindex; - if (select_device(&we_p->devtype, &dev_nr, bytelen) == -1) { - if (z90crypt.hdware_info->hdware_mask.st_count != 0) - return SEN_RETRY; - else - return SEN_NOT_AVAIL; - } - we_p->devindex = dev_nr; - device_p = z90crypt.device_p[dev_nr]; - if (!device_p) - return SEN_NOT_AVAIL; - if (device_p->dev_type != we_p->devtype) - return SEN_RETRY; - if (device_p->dev_caller_count >= device_p->dev_q_depth) - return SEN_QUEUE_FULL; - PDEBUG("device number prior to send: %d\n", dev_nr); - switch (send_to_AP(dev_nr, z90crypt.cdx, - caller_p->caller_dev_dep_req_l, - caller_p->caller_dev_dep_req_p)) { - case DEV_SEN_EXCEPTION: - PRINTKC("Exception during send to device %d\n", dev_nr); - z90crypt.terminating = 1; - return SEN_FATAL_ERROR; - case DEV_GONE: - PRINTK("Device %d not available\n", dev_nr); - remove_device(device_p); - return SEN_NOT_AVAIL; - case DEV_EMPTY: - return SEN_NOT_AVAIL; - case DEV_NO_WORK: - return SEN_FATAL_ERROR; - case DEV_BAD_MESSAGE: - return SEN_USER_ERROR; - case DEV_QUEUE_FULL: - return SEN_QUEUE_FULL; - default: - case DEV_ONLINE: - break; - } - list_add_tail(&(caller_p->caller_liste), &(device_p->dev_caller_list)); - device_p->dev_caller_count++; - return 0; -} - -/** - * Send puts the user's work on one of two queues: - * the pending queue if the send was successful - * the request queue if the send failed because device full or busy - */ -static inline int -z90crypt_send(struct work_element *we_p, const char *buf) -{ - int rv; - - PDEBUG("PID %d\n", PID()); - - if (CHK_RDWRMASK(we_p->status[0]) != STAT_NOWORK) { - PDEBUG("PID %d tried to send more work but has outstanding " - "work.\n", PID()); - return -EWORKPEND; - } - we_p->devindex = -1; // Reset device number - spin_lock_irq(&queuespinlock); - rv = send_to_crypto_device(we_p); - switch (rv) { - case 0: - we_p->requestsent = jiffies; - we_p->audit[0] |= FP_SENT; - list_add_tail(&we_p->liste, &pending_list); - ++pendingq_count; - we_p->audit[0] |= FP_PENDING; - break; - case SEN_BUSY: - case SEN_QUEUE_FULL: - rv = 0; - we_p->devindex = -1; // any device will do - we_p->requestsent = jiffies; - list_add_tail(&we_p->liste, &request_list); - ++requestq_count; - we_p->audit[0] |= FP_REQUEST; - break; - case SEN_RETRY: - rv = -ERESTARTSYS; - break; - case SEN_NOT_AVAIL: - PRINTK("*** No devices available.\n"); - rv = we_p->retcode = -ENODEV; - we_p->status[0] |= STAT_FAILED; - break; - case REC_OPERAND_INV: - case REC_OPERAND_SIZE: - case REC_EVEN_MOD: - case REC_INVALID_PAD: - rv = we_p->retcode = -EINVAL; - we_p->status[0] |= STAT_FAILED; - break; - default: - we_p->retcode = rv; - we_p->status[0] |= STAT_FAILED; - break; - } - if (rv != -ERESTARTSYS) - SET_RDWRMASK(we_p->status[0], STAT_WRITTEN); - spin_unlock_irq(&queuespinlock); - if (rv == 0) - tasklet_schedule(&reader_tasklet); - return rv; -} - -/** - * process_results copies the user's work from kernel space. - */ -static inline int -z90crypt_process_results(struct work_element *we_p, char __user *buf) -{ - int rv; - - PDEBUG("we_p %p (PID %d)\n", we_p, PID()); - - LONG2DEVPTR(we_p->devindex)->dev_total_req_cnt++; - SET_RDWRMASK(we_p->status[0], STAT_READPEND); - - rv = 0; - if (!we_p->buffer) { - PRINTK("we_p %p PID %d in STAT_READPEND: buffer NULL.\n", - we_p, PID()); - rv = -ENOBUFF; - } - - if (!rv) - if ((rv = copy_to_user(buf, we_p->buffer, we_p->buff_size))) { - PDEBUG("copy_to_user failed: rv = %d\n", rv); - rv = -EFAULT; - } - - if (!rv) - rv = we_p->retcode; - if (!rv) - if (we_p->resp_buff_size - && copy_to_user(we_p->resp_addr, we_p->resp_buff, - we_p->resp_buff_size)) - rv = -EFAULT; - - SET_RDWRMASK(we_p->status[0], STAT_NOWORK); - return rv; -} - -static unsigned char NULL_psmid[8] = -{0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00}; - -/** - * Used in device configuration functions - */ -#define MAX_RESET 90 - -/** - * This is used only for PCICC support - */ -static inline int -is_PKCS11_padded(unsigned char *buffer, int length) -{ - int i; - if ((buffer[0] != 0x00) || (buffer[1] != 0x01)) - return 0; - for (i = 2; i < length; i++) - if (buffer[i] != 0xFF) - break; - if ((i < 10) || (i == length)) - return 0; - if (buffer[i] != 0x00) - return 0; - return 1; -} - -/** - * This is used only for PCICC support - */ -static inline int -is_PKCS12_padded(unsigned char *buffer, int length) -{ - int i; - if ((buffer[0] != 0x00) || (buffer[1] != 0x02)) - return 0; - for (i = 2; i < length; i++) - if (buffer[i] == 0x00) - break; - if ((i < 10) || (i == length)) - return 0; - if (buffer[i] != 0x00) - return 0; - return 1; -} - -/** - * builds struct caller and converts message from generic format to - * device-dependent format - * func is ICARSAMODEXPO or ICARSACRT - * function is PCI_FUNC_KEY_ENCRYPT or PCI_FUNC_KEY_DECRYPT - */ -static inline int -build_caller(struct work_element *we_p, short function) -{ - int rv; - struct caller *caller_p = (struct caller *)we_p->requestptr; - - if ((we_p->devtype != PCICC) && (we_p->devtype != PCICA) && - (we_p->devtype != PCIXCC_MCL2) && (we_p->devtype != PCIXCC_MCL3) && - (we_p->devtype != CEX2C) && (we_p->devtype != CEX2A)) - return SEN_NOT_AVAIL; - - memcpy(caller_p->caller_id, we_p->caller_id, - sizeof(caller_p->caller_id)); - caller_p->caller_dev_dep_req_p = caller_p->caller_dev_dep_req; - caller_p->caller_dev_dep_req_l = MAX_RESPONSE_SIZE; - caller_p->caller_buf_p = we_p->buffer; - INIT_LIST_HEAD(&(caller_p->caller_liste)); - - rv = convert_request(we_p->buffer, we_p->funccode, function, - z90crypt.cdx, we_p->devtype, - &caller_p->caller_dev_dep_req_l, - caller_p->caller_dev_dep_req_p); - if (rv) { - if (rv == SEN_NOT_AVAIL) - PDEBUG("request can't be processed on hdwr avail\n"); - else - PRINTK("Error from convert_request: %d\n", rv); - } - else - memcpy(&(caller_p->caller_dev_dep_req_p[4]), we_p->caller_id,8); - return rv; -} - -static inline void -unbuild_caller(struct device *device_p, struct caller *caller_p) -{ - if (!caller_p) - return; - if (caller_p->caller_liste.next && caller_p->caller_liste.prev) - if (!list_empty(&caller_p->caller_liste)) { - list_del_init(&caller_p->caller_liste); - device_p->dev_caller_count--; - } - memset(caller_p->caller_id, 0, sizeof(caller_p->caller_id)); -} - -static inline int -get_crypto_request_buffer(struct work_element *we_p) -{ - struct ica_rsa_modexpo *mex_p; - struct ica_rsa_modexpo_crt *crt_p; - unsigned char *temp_buffer; - short function; - int rv; - - mex_p = (struct ica_rsa_modexpo *) we_p->buffer; - crt_p = (struct ica_rsa_modexpo_crt *) we_p->buffer; - - PDEBUG("device type input = %d\n", we_p->devtype); - - if (z90crypt.terminating) - return REC_NO_RESPONSE; - if (memcmp(we_p->caller_id, NULL_psmid, 8) == 0) { - PRINTK("psmid zeroes\n"); - return SEN_FATAL_ERROR; - } - if (!we_p->buffer) { - PRINTK("buffer pointer NULL\n"); - return SEN_USER_ERROR; - } - if (!we_p->requestptr) { - PRINTK("caller pointer NULL\n"); - return SEN_USER_ERROR; - } - - if ((we_p->devtype != PCICA) && (we_p->devtype != PCICC) && - (we_p->devtype != PCIXCC_MCL2) && (we_p->devtype != PCIXCC_MCL3) && - (we_p->devtype != CEX2C) && (we_p->devtype != CEX2A) && - (we_p->devtype != ANYDEV)) { - PRINTK("invalid device type\n"); - return SEN_USER_ERROR; - } - - if ((mex_p->inputdatalength < 1) || - (mex_p->inputdatalength > MAX_MOD_SIZE)) { - PRINTK("inputdatalength[%d] is not valid\n", - mex_p->inputdatalength); - return SEN_USER_ERROR; - } - - if (mex_p->outputdatalength < mex_p->inputdatalength) { - PRINTK("outputdatalength[%d] < inputdatalength[%d]\n", - mex_p->outputdatalength, mex_p->inputdatalength); - return SEN_USER_ERROR; - } - - if (!mex_p->inputdata || !mex_p->outputdata) { - PRINTK("inputdata[%p] or outputdata[%p] is NULL\n", - mex_p->outputdata, mex_p->inputdata); - return SEN_USER_ERROR; - } - - /** - * As long as outputdatalength is big enough, we can set the - * outputdatalength equal to the inputdatalength, since that is the - * number of bytes we will copy in any case - */ - mex_p->outputdatalength = mex_p->inputdatalength; - - rv = 0; - switch (we_p->funccode) { - case ICARSAMODEXPO: - if (!mex_p->b_key || !mex_p->n_modulus) - rv = SEN_USER_ERROR; - break; - case ICARSACRT: - if (!IS_EVEN(crt_p->inputdatalength)) { - PRINTK("inputdatalength[%d] is odd, CRT form\n", - crt_p->inputdatalength); - rv = SEN_USER_ERROR; - break; - } - if (!crt_p->bp_key || - !crt_p->bq_key || - !crt_p->np_prime || - !crt_p->nq_prime || - !crt_p->u_mult_inv) { - PRINTK("CRT form, bad data: %p/%p/%p/%p/%p\n", - crt_p->bp_key, crt_p->bq_key, - crt_p->np_prime, crt_p->nq_prime, - crt_p->u_mult_inv); - rv = SEN_USER_ERROR; - } - break; - default: - PRINTK("bad func = %d\n", we_p->funccode); - rv = SEN_USER_ERROR; - break; - } - if (rv != 0) - return rv; - - if (select_device_type(&we_p->devtype, mex_p->inputdatalength) < 0) - return SEN_NOT_AVAIL; - - temp_buffer = (unsigned char *)we_p + sizeof(struct work_element) + - sizeof(struct caller); - if (copy_from_user(temp_buffer, mex_p->inputdata, - mex_p->inputdatalength) != 0) - return SEN_RELEASED; - - function = PCI_FUNC_KEY_ENCRYPT; - switch (we_p->devtype) { - /* PCICA and CEX2A do everything with a simple RSA mod-expo operation */ - case PCICA: - case CEX2A: - function = PCI_FUNC_KEY_ENCRYPT; - break; - /** - * PCIXCC_MCL2 does all Mod-Expo form with a simple RSA mod-expo - * operation, and all CRT forms with a PKCS-1.2 format decrypt. - * PCIXCC_MCL3 and CEX2C do all Mod-Expo and CRT forms with a simple RSA - * mod-expo operation - */ - case PCIXCC_MCL2: - if (we_p->funccode == ICARSAMODEXPO) - function = PCI_FUNC_KEY_ENCRYPT; - else - function = PCI_FUNC_KEY_DECRYPT; - break; - case PCIXCC_MCL3: - case CEX2C: - if (we_p->funccode == ICARSAMODEXPO) - function = PCI_FUNC_KEY_ENCRYPT; - else - function = PCI_FUNC_KEY_DECRYPT; - break; - /** - * PCICC does everything as a PKCS-1.2 format request - */ - case PCICC: - /* PCICC cannot handle input that is is PKCS#1.1 padded */ - if (is_PKCS11_padded(temp_buffer, mex_p->inputdatalength)) { - return SEN_NOT_AVAIL; - } - if (we_p->funccode == ICARSAMODEXPO) { - if (is_PKCS12_padded(temp_buffer, - mex_p->inputdatalength)) - function = PCI_FUNC_KEY_ENCRYPT; - else - function = PCI_FUNC_KEY_DECRYPT; - } else - /* all CRT forms are decrypts */ - function = PCI_FUNC_KEY_DECRYPT; - break; - } - PDEBUG("function: %04x\n", function); - rv = build_caller(we_p, function); - PDEBUG("rv from build_caller = %d\n", rv); - return rv; -} - -static inline int -z90crypt_prepare(struct work_element *we_p, unsigned int funccode, - const char __user *buffer) -{ - int rv; - - we_p->devindex = -1; - if (funccode == ICARSAMODEXPO) - we_p->buff_size = sizeof(struct ica_rsa_modexpo); - else - we_p->buff_size = sizeof(struct ica_rsa_modexpo_crt); - - if (copy_from_user(we_p->buffer, buffer, we_p->buff_size)) - return -EFAULT; - - we_p->audit[0] |= FP_COPYFROM; - SET_RDWRMASK(we_p->status[0], STAT_WRITTEN); - we_p->funccode = funccode; - we_p->devtype = -1; - we_p->audit[0] |= FP_BUFFREQ; - rv = get_crypto_request_buffer(we_p); - switch (rv) { - case 0: - we_p->audit[0] |= FP_BUFFGOT; - break; - case SEN_USER_ERROR: - rv = -EINVAL; - break; - case SEN_QUEUE_FULL: - rv = 0; - break; - case SEN_RELEASED: - rv = -EFAULT; - break; - case REC_NO_RESPONSE: - rv = -ENODEV; - break; - case SEN_NOT_AVAIL: - case EGETBUFF: - rv = -EGETBUFF; - break; - default: - PRINTK("rv = %d\n", rv); - rv = -EGETBUFF; - break; - } - if (CHK_RDWRMASK(we_p->status[0]) == STAT_WRITTEN) - SET_RDWRMASK(we_p->status[0], STAT_DEFAULT); - return rv; -} - -static inline void -purge_work_element(struct work_element *we_p) -{ - struct list_head *lptr; - - spin_lock_irq(&queuespinlock); - list_for_each(lptr, &request_list) { - if (lptr == &we_p->liste) { - list_del_init(lptr); - requestq_count--; - break; - } - } - list_for_each(lptr, &pending_list) { - if (lptr == &we_p->liste) { - list_del_init(lptr); - pendingq_count--; - break; - } - } - spin_unlock_irq(&queuespinlock); -} - -/** - * Build the request and send it. - */ -static inline int -z90crypt_rsa(struct priv_data *private_data_p, pid_t pid, - unsigned int cmd, unsigned long arg) -{ - struct work_element *we_p; - int rv; - - if ((rv = allocate_work_element(&we_p, private_data_p, pid))) { - PDEBUG("PID %d: allocate_work_element returned ENOMEM\n", pid); - return rv; - } - if ((rv = z90crypt_prepare(we_p, cmd, (const char __user *)arg))) - PDEBUG("PID %d: rv = %d from z90crypt_prepare\n", pid, rv); - if (!rv) - if ((rv = z90crypt_send(we_p, (const char *)arg))) - PDEBUG("PID %d: rv %d from z90crypt_send.\n", pid, rv); - if (!rv) { - we_p->audit[0] |= FP_ASLEEP; - wait_event(we_p->waitq, atomic_read(&we_p->alarmrung)); - we_p->audit[0] |= FP_AWAKE; - rv = we_p->retcode; - } - if (!rv) - rv = z90crypt_process_results(we_p, (char __user *)arg); - - if ((we_p->status[0] & STAT_FAILED)) { - switch (rv) { - /** - * EINVAL *after* receive is almost always a padding error or - * length error issued by a coprocessor (not an accelerator). - * We convert this return value to -EGETBUFF which should - * trigger a fallback to software. - */ - case -EINVAL: - if ((we_p->devtype != PCICA) && - (we_p->devtype != CEX2A)) - rv = -EGETBUFF; - break; - case -ETIMEOUT: - if (z90crypt.mask.st_count > 0) - rv = -ERESTARTSYS; // retry with another - else - rv = -ENODEV; // no cards left - /* fall through to clean up request queue */ - case -ERESTARTSYS: - case -ERELEASED: - switch (CHK_RDWRMASK(we_p->status[0])) { - case STAT_WRITTEN: - purge_work_element(we_p); - break; - case STAT_READPEND: - case STAT_NOWORK: - default: - break; - } - break; - default: - we_p->status[0] ^= STAT_FAILED; - break; - } - } - free_page((long)we_p); - return rv; -} - -/** - * This function is a little long, but it's really just one large switch - * statement. - */ -static long -z90crypt_unlocked_ioctl(struct file *filp, unsigned int cmd, unsigned long arg) -{ - struct priv_data *private_data_p = filp->private_data; - unsigned char *status; - unsigned char *qdepth; - unsigned int *reqcnt; - struct ica_z90_status *pstat; - int ret, i, loopLim, tempstat; - static int deprecated_msg_count1 = 0; - static int deprecated_msg_count2 = 0; - - PDEBUG("filp %p (PID %d), cmd 0x%08X\n", filp, PID(), cmd); - PDEBUG("cmd 0x%08X: dir %s, size 0x%04X, type 0x%02X, nr 0x%02X\n", - cmd, - !_IOC_DIR(cmd) ? "NO" - : ((_IOC_DIR(cmd) == (_IOC_READ|_IOC_WRITE)) ? "RW" - : ((_IOC_DIR(cmd) == _IOC_READ) ? "RD" - : "WR")), - _IOC_SIZE(cmd), _IOC_TYPE(cmd), _IOC_NR(cmd)); - - if (_IOC_TYPE(cmd) != Z90_IOCTL_MAGIC) { - PRINTK("cmd 0x%08X contains bad magic\n", cmd); - return -ENOTTY; - } - - ret = 0; - switch (cmd) { - case ICARSAMODEXPO: - case ICARSACRT: - if (quiesce_z90crypt) { - ret = -EQUIESCE; - break; - } - ret = -ENODEV; // Default if no devices - loopLim = z90crypt.hdware_info->hdware_mask.st_count - - (z90crypt.hdware_info->hdware_mask.disabled_count + - z90crypt.hdware_info->hdware_mask.user_disabled_count); - for (i = 0; i < loopLim; i++) { - ret = z90crypt_rsa(private_data_p, PID(), cmd, arg); - if (ret != -ERESTARTSYS) - break; - } - if (ret == -ERESTARTSYS) - ret = -ENODEV; - break; - - case Z90STAT_TOTALCOUNT: - tempstat = get_status_totalcount(); - if (copy_to_user((int __user *)arg, &tempstat,sizeof(int)) != 0) - ret = -EFAULT; - break; - - case Z90STAT_PCICACOUNT: - tempstat = get_status_PCICAcount(); - if (copy_to_user((int __user *)arg, &tempstat, sizeof(int)) != 0) - ret = -EFAULT; - break; - - case Z90STAT_PCICCCOUNT: - tempstat = get_status_PCICCcount(); - if (copy_to_user((int __user *)arg, &tempstat, sizeof(int)) != 0) - ret = -EFAULT; - break; - - case Z90STAT_PCIXCCMCL2COUNT: - tempstat = get_status_PCIXCCMCL2count(); - if (copy_to_user((int __user *)arg, &tempstat, sizeof(int)) != 0) - ret = -EFAULT; - break; - - case Z90STAT_PCIXCCMCL3COUNT: - tempstat = get_status_PCIXCCMCL3count(); - if (copy_to_user((int __user *)arg, &tempstat, sizeof(int)) != 0) - ret = -EFAULT; - break; - - case Z90STAT_CEX2CCOUNT: - tempstat = get_status_CEX2Ccount(); - if (copy_to_user((int __user *)arg, &tempstat, sizeof(int)) != 0) - ret = -EFAULT; - break; - - case Z90STAT_CEX2ACOUNT: - tempstat = get_status_CEX2Acount(); - if (copy_to_user((int __user *)arg, &tempstat, sizeof(int)) != 0) - ret = -EFAULT; - break; - - case Z90STAT_REQUESTQ_COUNT: - tempstat = get_status_requestq_count(); - if (copy_to_user((int __user *)arg, &tempstat, sizeof(int)) != 0) - ret = -EFAULT; - break; - - case Z90STAT_PENDINGQ_COUNT: - tempstat = get_status_pendingq_count(); - if (copy_to_user((int __user *)arg, &tempstat, sizeof(int)) != 0) - ret = -EFAULT; - break; - - case Z90STAT_TOTALOPEN_COUNT: - tempstat = get_status_totalopen_count(); - if (copy_to_user((int __user *)arg, &tempstat, sizeof(int)) != 0) - ret = -EFAULT; - break; - - case Z90STAT_DOMAIN_INDEX: - tempstat = get_status_domain_index(); - if (copy_to_user((int __user *)arg, &tempstat, sizeof(int)) != 0) - ret = -EFAULT; - break; - - case Z90STAT_STATUS_MASK: - status = kmalloc(Z90CRYPT_NUM_APS, GFP_KERNEL); - if (!status) { - PRINTK("kmalloc for status failed!\n"); - ret = -ENOMEM; - break; - } - get_status_status_mask(status); - if (copy_to_user((char __user *) arg, status, Z90CRYPT_NUM_APS) - != 0) - ret = -EFAULT; - kfree(status); - break; - - case Z90STAT_QDEPTH_MASK: - qdepth = kmalloc(Z90CRYPT_NUM_APS, GFP_KERNEL); - if (!qdepth) { - PRINTK("kmalloc for qdepth failed!\n"); - ret = -ENOMEM; - break; - } - get_status_qdepth_mask(qdepth); - if (copy_to_user((char __user *) arg, qdepth, Z90CRYPT_NUM_APS) != 0) - ret = -EFAULT; - kfree(qdepth); - break; - - case Z90STAT_PERDEV_REQCNT: - reqcnt = kmalloc(sizeof(int) * Z90CRYPT_NUM_APS, GFP_KERNEL); - if (!reqcnt) { - PRINTK("kmalloc for reqcnt failed!\n"); - ret = -ENOMEM; - break; - } - get_status_perdevice_reqcnt(reqcnt); - if (copy_to_user((char __user *) arg, reqcnt, - Z90CRYPT_NUM_APS * sizeof(int)) != 0) - ret = -EFAULT; - kfree(reqcnt); - break; - - /* THIS IS DEPRECATED. USE THE NEW STATUS CALLS */ - case ICAZ90STATUS: - if (deprecated_msg_count1 < 20) { - PRINTK("deprecated call to ioctl (ICAZ90STATUS)!\n"); - deprecated_msg_count1++; - if (deprecated_msg_count1 == 20) - PRINTK("No longer issuing messages related to " - "deprecated call to ICAZ90STATUS.\n"); - } - - pstat = kmalloc(sizeof(struct ica_z90_status), GFP_KERNEL); - if (!pstat) { - PRINTK("kmalloc for pstat failed!\n"); - ret = -ENOMEM; - break; - } - - pstat->totalcount = get_status_totalcount(); - pstat->leedslitecount = get_status_PCICAcount(); - pstat->leeds2count = get_status_PCICCcount(); - pstat->requestqWaitCount = get_status_requestq_count(); - pstat->pendingqWaitCount = get_status_pendingq_count(); - pstat->totalOpenCount = get_status_totalopen_count(); - pstat->cryptoDomain = get_status_domain_index(); - get_status_status_mask(pstat->status); - get_status_qdepth_mask(pstat->qdepth); - - if (copy_to_user((struct ica_z90_status __user *) arg, pstat, - sizeof(struct ica_z90_status)) != 0) - ret = -EFAULT; - kfree(pstat); - break; - - /* THIS IS DEPRECATED. USE THE NEW STATUS CALLS */ - case Z90STAT_PCIXCCCOUNT: - if (deprecated_msg_count2 < 20) { - PRINTK("deprecated ioctl (Z90STAT_PCIXCCCOUNT)!\n"); - deprecated_msg_count2++; - if (deprecated_msg_count2 == 20) - PRINTK("No longer issuing messages about depre" - "cated ioctl Z90STAT_PCIXCCCOUNT.\n"); - } - - tempstat = get_status_PCIXCCcount(); - if (copy_to_user((int *)arg, &tempstat, sizeof(int)) != 0) - ret = -EFAULT; - break; - - case Z90QUIESCE: - if (current->euid != 0) { - PRINTK("QUIESCE fails: euid %d\n", - current->euid); - ret = -EACCES; - } else { - PRINTK("QUIESCE device from PID %d\n", PID()); - quiesce_z90crypt = 1; - } - break; - - default: - /* user passed an invalid IOCTL number */ - PDEBUG("cmd 0x%08X contains invalid ioctl code\n", cmd); - ret = -ENOTTY; - break; - } - - return ret; -} - -static inline int -sprintcl(unsigned char *outaddr, unsigned char *addr, unsigned int len) -{ - int hl, i; - - hl = 0; - for (i = 0; i < len; i++) - hl += sprintf(outaddr+hl, "%01x", (unsigned int) addr[i]); - hl += sprintf(outaddr+hl, " "); - - return hl; -} - -static inline int -sprintrw(unsigned char *outaddr, unsigned char *addr, unsigned int len) -{ - int hl, inl, c, cx; - - hl = sprintf(outaddr, " "); - inl = 0; - for (c = 0; c < (len / 16); c++) { - hl += sprintcl(outaddr+hl, addr+inl, 16); - inl += 16; - } - - cx = len%16; - if (cx) { - hl += sprintcl(outaddr+hl, addr+inl, cx); - inl += cx; - } - - hl += sprintf(outaddr+hl, "\n"); - - return hl; -} - -static inline int -sprinthx(unsigned char *title, unsigned char *outaddr, - unsigned char *addr, unsigned int len) -{ - int hl, inl, r, rx; - - hl = sprintf(outaddr, "\n%s\n", title); - inl = 0; - for (r = 0; r < (len / 64); r++) { - hl += sprintrw(outaddr+hl, addr+inl, 64); - inl += 64; - } - rx = len % 64; - if (rx) { - hl += sprintrw(outaddr+hl, addr+inl, rx); - inl += rx; - } - - hl += sprintf(outaddr+hl, "\n"); - - return hl; -} - -static inline int -sprinthx4(unsigned char *title, unsigned char *outaddr, - unsigned int *array, unsigned int len) -{ - int hl, r; - - hl = sprintf(outaddr, "\n%s\n", title); - - for (r = 0; r < len; r++) { - if ((r % 8) == 0) - hl += sprintf(outaddr+hl, " "); - hl += sprintf(outaddr+hl, "%08X ", array[r]); - if ((r % 8) == 7) - hl += sprintf(outaddr+hl, "\n"); - } - - hl += sprintf(outaddr+hl, "\n"); - - return hl; -} - -static int -z90crypt_status(char *resp_buff, char **start, off_t offset, - int count, int *eof, void *data) -{ - unsigned char *workarea; - int len; - - /* resp_buff is a page. Use the right half for a work area */ - workarea = resp_buff+2000; - len = 0; - len += sprintf(resp_buff+len, "\nz90crypt version: %d.%d.%d\n", - z90crypt_VERSION, z90crypt_RELEASE, z90crypt_VARIANT); - len += sprintf(resp_buff+len, "Cryptographic domain: %d\n", - get_status_domain_index()); - len += sprintf(resp_buff+len, "Total device count: %d\n", - get_status_totalcount()); - len += sprintf(resp_buff+len, "PCICA count: %d\n", - get_status_PCICAcount()); - len += sprintf(resp_buff+len, "PCICC count: %d\n", - get_status_PCICCcount()); - len += sprintf(resp_buff+len, "PCIXCC MCL2 count: %d\n", - get_status_PCIXCCMCL2count()); - len += sprintf(resp_buff+len, "PCIXCC MCL3 count: %d\n", - get_status_PCIXCCMCL3count()); - len += sprintf(resp_buff+len, "CEX2C count: %d\n", - get_status_CEX2Ccount()); - len += sprintf(resp_buff+len, "CEX2A count: %d\n", - get_status_CEX2Acount()); - len += sprintf(resp_buff+len, "requestq count: %d\n", - get_status_requestq_count()); - len += sprintf(resp_buff+len, "pendingq count: %d\n", - get_status_pendingq_count()); - len += sprintf(resp_buff+len, "Total open handles: %d\n\n", - get_status_totalopen_count()); - len += sprinthx( - "Online devices: 1=PCICA 2=PCICC 3=PCIXCC(MCL2) " - "4=PCIXCC(MCL3) 5=CEX2C 6=CEX2A", - resp_buff+len, - get_status_status_mask(workarea), - Z90CRYPT_NUM_APS); - len += sprinthx("Waiting work element counts", - resp_buff+len, - get_status_qdepth_mask(workarea), - Z90CRYPT_NUM_APS); - len += sprinthx4( - "Per-device successfully completed request counts", - resp_buff+len, - get_status_perdevice_reqcnt((unsigned int *)workarea), - Z90CRYPT_NUM_APS); - *eof = 1; - memset(workarea, 0, Z90CRYPT_NUM_APS * sizeof(unsigned int)); - return len; -} - -static inline void -disable_card(int card_index) -{ - struct device *devp; - - devp = LONG2DEVPTR(card_index); - if (!devp || devp->user_disabled) - return; - devp->user_disabled = 1; - z90crypt.hdware_info->hdware_mask.user_disabled_count++; - if (devp->dev_type == -1) - return; - z90crypt.hdware_info->type_mask[devp->dev_type].user_disabled_count++; -} - -static inline void -enable_card(int card_index) -{ - struct device *devp; - - devp = LONG2DEVPTR(card_index); - if (!devp || !devp->user_disabled) - return; - devp->user_disabled = 0; - z90crypt.hdware_info->hdware_mask.user_disabled_count--; - if (devp->dev_type == -1) - return; - z90crypt.hdware_info->type_mask[devp->dev_type].user_disabled_count--; -} - -static int -z90crypt_status_write(struct file *file, const char __user *buffer, - unsigned long count, void *data) -{ - int j, eol; - unsigned char *lbuf, *ptr; - unsigned int local_count; - -#define LBUFSIZE 1200 - lbuf = kmalloc(LBUFSIZE, GFP_KERNEL); - if (!lbuf) { - PRINTK("kmalloc failed!\n"); - return 0; - } - - if (count <= 0) - return 0; - - local_count = UMIN((unsigned int)count, LBUFSIZE-1); - - if (copy_from_user(lbuf, buffer, local_count) != 0) { - kfree(lbuf); - return -EFAULT; - } - - lbuf[local_count] = '\0'; - - ptr = strstr(lbuf, "Online devices"); - if (ptr == 0) { - PRINTK("Unable to parse data (missing \"Online devices\")\n"); - kfree(lbuf); - return count; - } - - ptr = strstr(ptr, "\n"); - if (ptr == 0) { - PRINTK("Unable to parse data (missing newline after \"Online devices\")\n"); - kfree(lbuf); - return count; - } - ptr++; - - if (strstr(ptr, "Waiting work element counts") == NULL) { - PRINTK("Unable to parse data (missing \"Waiting work element counts\")\n"); - kfree(lbuf); - return count; - } - - j = 0; - eol = 0; - while ((j < 64) && (*ptr != '\0')) { - switch (*ptr) { - case '\t': - case ' ': - break; - case '\n': - default: - eol = 1; - break; - case '0': // no device - case '1': // PCICA - case '2': // PCICC - case '3': // PCIXCC_MCL2 - case '4': // PCIXCC_MCL3 - case '5': // CEX2C - case '6': // CEX2A - j++; - break; - case 'd': - case 'D': - disable_card(j); - j++; - break; - case 'e': - case 'E': - enable_card(j); - j++; - break; - } - if (eol) - break; - ptr++; - } - - kfree(lbuf); - return count; -} - -/** - * Functions that run under a timer, with no process id - * - * The task functions: - * z90crypt_reader_task - * helper_send_work - * helper_handle_work_element - * helper_receive_rc - * z90crypt_config_task - * z90crypt_cleanup_task - * - * Helper functions: - * z90crypt_schedule_reader_timer - * z90crypt_schedule_reader_task - * z90crypt_schedule_config_task - * z90crypt_schedule_cleanup_task - */ -static inline int -receive_from_crypto_device(int index, unsigned char *psmid, int *buff_len_p, - unsigned char *buff, unsigned char __user **dest_p_p) -{ - int dv, rv; - struct device *dev_ptr; - struct caller *caller_p; - struct ica_rsa_modexpo *icaMsg_p; - struct list_head *ptr, *tptr; - - memcpy(psmid, NULL_psmid, sizeof(NULL_psmid)); - - if (z90crypt.terminating) - return REC_FATAL_ERROR; - - caller_p = 0; - dev_ptr = z90crypt.device_p[index]; - rv = 0; - do { - if (!dev_ptr || dev_ptr->disabled) { - rv = REC_NO_WORK; // a disabled device can't return work - break; - } - if (dev_ptr->dev_self_x != index) { - PRINTKC("Corrupt dev ptr\n"); - z90crypt.terminating = 1; - rv = REC_FATAL_ERROR; - break; - } - if (!dev_ptr->dev_resp_l || !dev_ptr->dev_resp_p) { - dv = DEV_REC_EXCEPTION; - PRINTK("dev_resp_l = %d, dev_resp_p = %p\n", - dev_ptr->dev_resp_l, dev_ptr->dev_resp_p); - } else { - PDEBUG("Dequeue called for device %d\n", index); - dv = receive_from_AP(index, z90crypt.cdx, - dev_ptr->dev_resp_l, - dev_ptr->dev_resp_p, psmid); - } - switch (dv) { - case DEV_REC_EXCEPTION: - rv = REC_FATAL_ERROR; - z90crypt.terminating = 1; - PRINTKC("Exception in receive from device %d\n", - index); - break; - case DEV_ONLINE: - rv = 0; - break; - case DEV_EMPTY: - rv = REC_EMPTY; - break; - case DEV_NO_WORK: - rv = REC_NO_WORK; - break; - case DEV_BAD_MESSAGE: - case DEV_GONE: - case REC_HARDWAR_ERR: - default: - rv = REC_NO_RESPONSE; - break; - } - if (rv) - break; - if (dev_ptr->dev_caller_count <= 0) { - rv = REC_USER_GONE; - break; - } - - list_for_each_safe(ptr, tptr, &dev_ptr->dev_caller_list) { - caller_p = list_entry(ptr, struct caller, caller_liste); - if (!memcmp(caller_p->caller_id, psmid, - sizeof(caller_p->caller_id))) { - if (!list_empty(&caller_p->caller_liste)) { - list_del_init(ptr); - dev_ptr->dev_caller_count--; - break; - } - } - caller_p = 0; - } - if (!caller_p) { - PRINTKW("Unable to locate PSMID %02X%02X%02X%02X%02X" - "%02X%02X%02X in device list\n", - psmid[0], psmid[1], psmid[2], psmid[3], - psmid[4], psmid[5], psmid[6], psmid[7]); - rv = REC_USER_GONE; - break; - } - - PDEBUG("caller_p after successful receive: %p\n", caller_p); - rv = convert_response(dev_ptr->dev_resp_p, - caller_p->caller_buf_p, buff_len_p, buff); - switch (rv) { - case REC_USE_PCICA: - break; - case REC_OPERAND_INV: - case REC_OPERAND_SIZE: - case REC_EVEN_MOD: - case REC_INVALID_PAD: - PDEBUG("device %d: 'user error' %d\n", index, rv); - break; - case WRONG_DEVICE_TYPE: - case REC_HARDWAR_ERR: - case REC_BAD_MESSAGE: - PRINTKW("device %d: hardware error %d\n", index, rv); - rv = REC_NO_RESPONSE; - break; - default: - PDEBUG("device %d: rv = %d\n", index, rv); - break; - } - } while (0); - - switch (rv) { - case 0: - PDEBUG("Successful receive from device %d\n", index); - icaMsg_p = (struct ica_rsa_modexpo *)caller_p->caller_buf_p; - *dest_p_p = icaMsg_p->outputdata; - if (*buff_len_p == 0) - PRINTK("Zero *buff_len_p\n"); - break; - case REC_NO_RESPONSE: - PRINTKW("Removing device %d from availability\n", index); - remove_device(dev_ptr); - break; - } - - if (caller_p) - unbuild_caller(dev_ptr, caller_p); - - return rv; -} - -static inline void -helper_send_work(int index) -{ - struct work_element *rq_p; - int rv; - - if (list_empty(&request_list)) - return; - requestq_count--; - rq_p = list_entry(request_list.next, struct work_element, liste); - list_del_init(&rq_p->liste); - rq_p->audit[1] |= FP_REMREQUEST; - if (rq_p->devtype == SHRT2DEVPTR(index)->dev_type) { - rq_p->devindex = SHRT2LONG(index); - rv = send_to_crypto_device(rq_p); - if (rv == 0) { - rq_p->requestsent = jiffies; - rq_p->audit[0] |= FP_SENT; - list_add_tail(&rq_p->liste, &pending_list); - ++pendingq_count; - rq_p->audit[0] |= FP_PENDING; - } else { - switch (rv) { - case REC_OPERAND_INV: - case REC_OPERAND_SIZE: - case REC_EVEN_MOD: - case REC_INVALID_PAD: - rq_p->retcode = -EINVAL; - break; - case SEN_NOT_AVAIL: - case SEN_RETRY: - case REC_NO_RESPONSE: - default: - if (z90crypt.mask.st_count > 1) - rq_p->retcode = - -ERESTARTSYS; - else - rq_p->retcode = -ENODEV; - break; - } - rq_p->status[0] |= STAT_FAILED; - rq_p->audit[1] |= FP_AWAKENING; - atomic_set(&rq_p->alarmrung, 1); - wake_up(&rq_p->waitq); - } - } else { - if (z90crypt.mask.st_count > 1) - rq_p->retcode = -ERESTARTSYS; - else - rq_p->retcode = -ENODEV; - rq_p->status[0] |= STAT_FAILED; - rq_p->audit[1] |= FP_AWAKENING; - atomic_set(&rq_p->alarmrung, 1); - wake_up(&rq_p->waitq); - } -} - -static inline void -helper_handle_work_element(int index, unsigned char psmid[8], int rc, - int buff_len, unsigned char *buff, - unsigned char __user *resp_addr) -{ - struct work_element *pq_p; - struct list_head *lptr, *tptr; - - pq_p = 0; - list_for_each_safe(lptr, tptr, &pending_list) { - pq_p = list_entry(lptr, struct work_element, liste); - if (!memcmp(pq_p->caller_id, psmid, sizeof(pq_p->caller_id))) { - list_del_init(lptr); - pendingq_count--; - pq_p->audit[1] |= FP_NOTPENDING; - break; - } - pq_p = 0; - } - - if (!pq_p) { - PRINTK("device %d has work but no caller exists on pending Q\n", - SHRT2LONG(index)); - return; - } - - switch (rc) { - case 0: - pq_p->resp_buff_size = buff_len; - pq_p->audit[1] |= FP_RESPSIZESET; - if (buff_len) { - pq_p->resp_addr = resp_addr; - pq_p->audit[1] |= FP_RESPADDRCOPIED; - memcpy(pq_p->resp_buff, buff, buff_len); - pq_p->audit[1] |= FP_RESPBUFFCOPIED; - } - break; - case REC_OPERAND_INV: - case REC_OPERAND_SIZE: - case REC_EVEN_MOD: - case REC_INVALID_PAD: - PDEBUG("-EINVAL after application error %d\n", rc); - pq_p->retcode = -EINVAL; - pq_p->status[0] |= STAT_FAILED; - break; - case REC_USE_PCICA: - pq_p->retcode = -ERESTARTSYS; - pq_p->status[0] |= STAT_FAILED; - break; - case REC_NO_RESPONSE: - default: - if (z90crypt.mask.st_count > 1) - pq_p->retcode = -ERESTARTSYS; - else - pq_p->retcode = -ENODEV; - pq_p->status[0] |= STAT_FAILED; - break; - } - if ((pq_p->status[0] != STAT_FAILED) || (pq_p->retcode != -ERELEASED)) { - pq_p->audit[1] |= FP_AWAKENING; - atomic_set(&pq_p->alarmrung, 1); - wake_up(&pq_p->waitq); - } -} - -/** - * return TRUE if the work element should be removed from the queue - */ -static inline int -helper_receive_rc(int index, int *rc_p) -{ - switch (*rc_p) { - case 0: - case REC_OPERAND_INV: - case REC_OPERAND_SIZE: - case REC_EVEN_MOD: - case REC_INVALID_PAD: - case REC_USE_PCICA: - break; - - case REC_BUSY: - case REC_NO_WORK: - case REC_EMPTY: - case REC_RETRY_DEV: - case REC_FATAL_ERROR: - return 0; - - case REC_NO_RESPONSE: - break; - - default: - PRINTK("rc %d, device %d converted to REC_NO_RESPONSE\n", - *rc_p, SHRT2LONG(index)); - *rc_p = REC_NO_RESPONSE; - break; - } - return 1; -} - -static inline void -z90crypt_schedule_reader_timer(void) -{ - if (timer_pending(&reader_timer)) - return; - if (mod_timer(&reader_timer, jiffies+(READERTIME*HZ/1000)) != 0) - PRINTK("Timer pending while modifying reader timer\n"); -} - -static void -z90crypt_reader_task(unsigned long ptr) -{ - int workavail, index, rc, buff_len; - unsigned char psmid[8]; - unsigned char __user *resp_addr; - static unsigned char buff[1024]; - - /** - * we use workavail = 2 to ensure 2 passes with nothing dequeued before - * exiting the loop. If (pendingq_count+requestq_count) == 0 after the - * loop, there is no work remaining on the queues. - */ - resp_addr = 0; - workavail = 2; - buff_len = 0; - while (workavail) { - workavail--; - rc = 0; - spin_lock_irq(&queuespinlock); - memset(buff, 0x00, sizeof(buff)); - - /* Dequeue once from each device in round robin. */ - for (index = 0; index < z90crypt.mask.st_count; index++) { - PDEBUG("About to receive.\n"); - rc = receive_from_crypto_device(SHRT2LONG(index), - psmid, - &buff_len, - buff, - &resp_addr); - PDEBUG("Dequeued: rc = %d.\n", rc); - - if (helper_receive_rc(index, &rc)) { - if (rc != REC_NO_RESPONSE) { - helper_send_work(index); - workavail = 2; - } - - helper_handle_work_element(index, psmid, rc, - buff_len, buff, - resp_addr); - } - - if (rc == REC_FATAL_ERROR) - PRINTKW("REC_FATAL_ERROR from device %d!\n", - SHRT2LONG(index)); - } - spin_unlock_irq(&queuespinlock); - } - - if (pendingq_count + requestq_count) - z90crypt_schedule_reader_timer(); -} - -static inline void -z90crypt_schedule_config_task(unsigned int expiration) -{ - if (timer_pending(&config_timer)) - return; - if (mod_timer(&config_timer, jiffies+(expiration*HZ)) != 0) - PRINTK("Timer pending while modifying config timer\n"); -} - -static void -z90crypt_config_task(unsigned long ptr) -{ - int rc; - - PDEBUG("jiffies %ld\n", jiffies); - - if ((rc = refresh_z90crypt(&z90crypt.cdx))) - PRINTK("Error %d detected in refresh_z90crypt.\n", rc); - /* If return was fatal, don't bother reconfiguring */ - if ((rc != TSQ_FATAL_ERROR) && (rc != RSQ_FATAL_ERROR)) - z90crypt_schedule_config_task(CONFIGTIME); -} - -static inline void -z90crypt_schedule_cleanup_task(void) -{ - if (timer_pending(&cleanup_timer)) - return; - if (mod_timer(&cleanup_timer, jiffies+(CLEANUPTIME*HZ)) != 0) - PRINTK("Timer pending while modifying cleanup timer\n"); -} - -static inline void -helper_drain_queues(void) -{ - struct work_element *pq_p; - struct list_head *lptr, *tptr; - - list_for_each_safe(lptr, tptr, &pending_list) { - pq_p = list_entry(lptr, struct work_element, liste); - pq_p->retcode = -ENODEV; - pq_p->status[0] |= STAT_FAILED; - unbuild_caller(LONG2DEVPTR(pq_p->devindex), - (struct caller *)pq_p->requestptr); - list_del_init(lptr); - pendingq_count--; - pq_p->audit[1] |= FP_NOTPENDING; - pq_p->audit[1] |= FP_AWAKENING; - atomic_set(&pq_p->alarmrung, 1); - wake_up(&pq_p->waitq); - } - - list_for_each_safe(lptr, tptr, &request_list) { - pq_p = list_entry(lptr, struct work_element, liste); - pq_p->retcode = -ENODEV; - pq_p->status[0] |= STAT_FAILED; - list_del_init(lptr); - requestq_count--; - pq_p->audit[1] |= FP_REMREQUEST; - pq_p->audit[1] |= FP_AWAKENING; - atomic_set(&pq_p->alarmrung, 1); - wake_up(&pq_p->waitq); - } -} - -static inline void -helper_timeout_requests(void) -{ - struct work_element *pq_p; - struct list_head *lptr, *tptr; - long timelimit; - - timelimit = jiffies - (CLEANUPTIME * HZ); - /* The list is in strict chronological order */ - list_for_each_safe(lptr, tptr, &pending_list) { - pq_p = list_entry(lptr, struct work_element, liste); - if (pq_p->requestsent >= timelimit) - break; - PRINTKW("Purging(PQ) PSMID %02X%02X%02X%02X%02X%02X%02X%02X\n", - ((struct caller *)pq_p->requestptr)->caller_id[0], - ((struct caller *)pq_p->requestptr)->caller_id[1], - ((struct caller *)pq_p->requestptr)->caller_id[2], - ((struct caller *)pq_p->requestptr)->caller_id[3], - ((struct caller *)pq_p->requestptr)->caller_id[4], - ((struct caller *)pq_p->requestptr)->caller_id[5], - ((struct caller *)pq_p->requestptr)->caller_id[6], - ((struct caller *)pq_p->requestptr)->caller_id[7]); - pq_p->retcode = -ETIMEOUT; - pq_p->status[0] |= STAT_FAILED; - /* get this off any caller queue it may be on */ - unbuild_caller(LONG2DEVPTR(pq_p->devindex), - (struct caller *) pq_p->requestptr); - list_del_init(lptr); - pendingq_count--; - pq_p->audit[1] |= FP_TIMEDOUT; - pq_p->audit[1] |= FP_NOTPENDING; - pq_p->audit[1] |= FP_AWAKENING; - atomic_set(&pq_p->alarmrung, 1); - wake_up(&pq_p->waitq); - } - - /** - * If pending count is zero, items left on the request queue may - * never be processed. - */ - if (pendingq_count <= 0) { - list_for_each_safe(lptr, tptr, &request_list) { - pq_p = list_entry(lptr, struct work_element, liste); - if (pq_p->requestsent >= timelimit) - break; - PRINTKW("Purging(RQ) PSMID %02X%02X%02X%02X%02X%02X%02X%02X\n", - ((struct caller *)pq_p->requestptr)->caller_id[0], - ((struct caller *)pq_p->requestptr)->caller_id[1], - ((struct caller *)pq_p->requestptr)->caller_id[2], - ((struct caller *)pq_p->requestptr)->caller_id[3], - ((struct caller *)pq_p->requestptr)->caller_id[4], - ((struct caller *)pq_p->requestptr)->caller_id[5], - ((struct caller *)pq_p->requestptr)->caller_id[6], - ((struct caller *)pq_p->requestptr)->caller_id[7]); - pq_p->retcode = -ETIMEOUT; - pq_p->status[0] |= STAT_FAILED; - list_del_init(lptr); - requestq_count--; - pq_p->audit[1] |= FP_TIMEDOUT; - pq_p->audit[1] |= FP_REMREQUEST; - pq_p->audit[1] |= FP_AWAKENING; - atomic_set(&pq_p->alarmrung, 1); - wake_up(&pq_p->waitq); - } - } -} - -static void -z90crypt_cleanup_task(unsigned long ptr) -{ - PDEBUG("jiffies %ld\n", jiffies); - spin_lock_irq(&queuespinlock); - if (z90crypt.mask.st_count <= 0) // no devices! - helper_drain_queues(); - else - helper_timeout_requests(); - spin_unlock_irq(&queuespinlock); - z90crypt_schedule_cleanup_task(); -} - -static void -z90crypt_schedule_reader_task(unsigned long ptr) -{ - tasklet_schedule(&reader_tasklet); -} - -/** - * Lowlevel Functions: - * - * create_z90crypt: creates and initializes basic data structures - * refresh_z90crypt: re-initializes basic data structures - * find_crypto_devices: returns a count and mask of hardware status - * create_crypto_device: builds the descriptor for a device - * destroy_crypto_device: unallocates the descriptor for a device - * destroy_z90crypt: drains all work, unallocates structs - */ - -/** - * build the z90crypt root structure using the given domain index - */ -static int -create_z90crypt(int *cdx_p) -{ - struct hdware_block *hdware_blk_p; - - memset(&z90crypt, 0x00, sizeof(struct z90crypt)); - z90crypt.domain_established = 0; - z90crypt.len = sizeof(struct z90crypt); - z90crypt.max_count = Z90CRYPT_NUM_DEVS; - z90crypt.cdx = *cdx_p; - - hdware_blk_p = kzalloc(sizeof(struct hdware_block), GFP_ATOMIC); - if (!hdware_blk_p) { - PDEBUG("kmalloc for hardware block failed\n"); - return ENOMEM; - } - z90crypt.hdware_info = hdware_blk_p; - - return 0; -} - -static inline int -helper_scan_devices(int cdx_array[16], int *cdx_p, int *correct_cdx_found) -{ - enum hdstat hd_stat; - int q_depth, dev_type; - int indx, chkdom, numdomains; - - q_depth = dev_type = numdomains = 0; - for (chkdom = 0; chkdom <= 15; cdx_array[chkdom++] = -1); - for (indx = 0; indx < z90crypt.max_count; indx++) { - hd_stat = HD_NOT_THERE; - numdomains = 0; - for (chkdom = 0; chkdom <= 15; chkdom++) { - hd_stat = query_online(indx, chkdom, MAX_RESET, - &q_depth, &dev_type); - if (hd_stat == HD_TSQ_EXCEPTION) { - z90crypt.terminating = 1; - PRINTKC("exception taken!\n"); - break; - } - if (hd_stat == HD_ONLINE) { - cdx_array[numdomains++] = chkdom; - if (*cdx_p == chkdom) { - *correct_cdx_found = 1; - break; - } - } - } - if ((*correct_cdx_found == 1) || (numdomains != 0)) - break; - if (z90crypt.terminating) - break; - } - return numdomains; -} - -static inline int -probe_crypto_domain(int *cdx_p) -{ - int cdx_array[16]; - char cdx_array_text[53], temp[5]; - int correct_cdx_found, numdomains; - - correct_cdx_found = 0; - numdomains = helper_scan_devices(cdx_array, cdx_p, &correct_cdx_found); - - if (z90crypt.terminating) - return TSQ_FATAL_ERROR; - - if (correct_cdx_found) - return 0; - - if (numdomains == 0) { - PRINTKW("Unable to find crypto domain: No devices found\n"); - return Z90C_NO_DEVICES; - } - - if (numdomains == 1) { - if (*cdx_p == -1) { - *cdx_p = cdx_array[0]; - return 0; - } - PRINTKW("incorrect domain: specified = %d, found = %d\n", - *cdx_p, cdx_array[0]); - return Z90C_INCORRECT_DOMAIN; - } - - numdomains--; - sprintf(cdx_array_text, "%d", cdx_array[numdomains]); - while (numdomains) { - numdomains--; - sprintf(temp, ", %d", cdx_array[numdomains]); - strcat(cdx_array_text, temp); - } - - PRINTKW("ambiguous domain detected: specified = %d, found array = %s\n", - *cdx_p, cdx_array_text); - return Z90C_AMBIGUOUS_DOMAIN; -} - -static int -refresh_z90crypt(int *cdx_p) -{ - int i, j, indx, rv; - static struct status local_mask; - struct device *devPtr; - unsigned char oldStat, newStat; - int return_unchanged; - - if (z90crypt.len != sizeof(z90crypt)) - return ENOTINIT; - if (z90crypt.terminating) - return TSQ_FATAL_ERROR; - rv = 0; - if (!z90crypt.hdware_info->hdware_mask.st_count && - !z90crypt.domain_established) { - rv = probe_crypto_domain(cdx_p); - if (z90crypt.terminating) - return TSQ_FATAL_ERROR; - if (rv == Z90C_NO_DEVICES) - return 0; // try later - if (rv) - return rv; - z90crypt.cdx = *cdx_p; - z90crypt.domain_established = 1; - } - rv = find_crypto_devices(&local_mask); - if (rv) { - PRINTK("find crypto devices returned %d\n", rv); - return rv; - } - if (!memcmp(&local_mask, &z90crypt.hdware_info->hdware_mask, - sizeof(struct status))) { - return_unchanged = 1; - for (i = 0; i < Z90CRYPT_NUM_TYPES; i++) { - /** - * Check for disabled cards. If any device is marked - * disabled, destroy it. - */ - for (j = 0; - j < z90crypt.hdware_info->type_mask[i].st_count; - j++) { - indx = z90crypt.hdware_info->type_x_addr[i]. - device_index[j]; - devPtr = z90crypt.device_p[indx]; - if (devPtr && devPtr->disabled) { - local_mask.st_mask[indx] = HD_NOT_THERE; - return_unchanged = 0; - } - } - } - if (return_unchanged == 1) - return 0; - } - - spin_lock_irq(&queuespinlock); - for (i = 0; i < z90crypt.max_count; i++) { - oldStat = z90crypt.hdware_info->hdware_mask.st_mask[i]; - newStat = local_mask.st_mask[i]; - if ((oldStat == HD_ONLINE) && (newStat != HD_ONLINE)) - destroy_crypto_device(i); - else if ((oldStat != HD_ONLINE) && (newStat == HD_ONLINE)) { - rv = create_crypto_device(i); - if (rv >= REC_FATAL_ERROR) - return rv; - if (rv != 0) { - local_mask.st_mask[i] = HD_NOT_THERE; - local_mask.st_count--; - } - } - } - memcpy(z90crypt.hdware_info->hdware_mask.st_mask, local_mask.st_mask, - sizeof(local_mask.st_mask)); - z90crypt.hdware_info->hdware_mask.st_count = local_mask.st_count; - z90crypt.hdware_info->hdware_mask.disabled_count = - local_mask.disabled_count; - refresh_index_array(&z90crypt.mask, &z90crypt.overall_device_x); - for (i = 0; i < Z90CRYPT_NUM_TYPES; i++) - refresh_index_array(&(z90crypt.hdware_info->type_mask[i]), - &(z90crypt.hdware_info->type_x_addr[i])); - spin_unlock_irq(&queuespinlock); - - return rv; -} - -static int -find_crypto_devices(struct status *deviceMask) -{ - int i, q_depth, dev_type; - enum hdstat hd_stat; - - deviceMask->st_count = 0; - deviceMask->disabled_count = 0; - deviceMask->user_disabled_count = 0; - - for (i = 0; i < z90crypt.max_count; i++) { - hd_stat = query_online(i, z90crypt.cdx, MAX_RESET, &q_depth, - &dev_type); - if (hd_stat == HD_TSQ_EXCEPTION) { - z90crypt.terminating = 1; - PRINTKC("Exception during probe for crypto devices\n"); - return TSQ_FATAL_ERROR; - } - deviceMask->st_mask[i] = hd_stat; - if (hd_stat == HD_ONLINE) { - PDEBUG("Got an online crypto!: %d\n", i); - PDEBUG("Got a queue depth of %d\n", q_depth); - PDEBUG("Got a device type of %d\n", dev_type); - if (q_depth <= 0) - return TSQ_FATAL_ERROR; - deviceMask->st_count++; - z90crypt.q_depth_array[i] = q_depth; - z90crypt.dev_type_array[i] = dev_type; - } - } - - return 0; -} - -static int -refresh_index_array(struct status *status_str, struct device_x *index_array) -{ - int i, count; - enum devstat stat; - - i = -1; - count = 0; - do { - stat = status_str->st_mask[++i]; - if (stat == DEV_ONLINE) - index_array->device_index[count++] = i; - } while ((i < Z90CRYPT_NUM_DEVS) && (count < status_str->st_count)); - - return count; -} - -static int -create_crypto_device(int index) -{ - int rv, devstat, total_size; - struct device *dev_ptr; - struct status *type_str_p; - int deviceType; - - dev_ptr = z90crypt.device_p[index]; - if (!dev_ptr) { - total_size = sizeof(struct device) + - z90crypt.q_depth_array[index] * sizeof(int); - - dev_ptr = kzalloc(total_size, GFP_ATOMIC); - if (!dev_ptr) { - PRINTK("kmalloc device %d failed\n", index); - return ENOMEM; - } - dev_ptr->dev_resp_p = kmalloc(MAX_RESPONSE_SIZE, GFP_ATOMIC); - if (!dev_ptr->dev_resp_p) { - kfree(dev_ptr); - PRINTK("kmalloc device %d rec buffer failed\n", index); - return ENOMEM; - } - dev_ptr->dev_resp_l = MAX_RESPONSE_SIZE; - INIT_LIST_HEAD(&(dev_ptr->dev_caller_list)); - } - - devstat = reset_device(index, z90crypt.cdx, MAX_RESET); - if (devstat == DEV_RSQ_EXCEPTION) { - PRINTK("exception during reset device %d\n", index); - kfree(dev_ptr->dev_resp_p); - kfree(dev_ptr); - return RSQ_FATAL_ERROR; - } - if (devstat == DEV_ONLINE) { - dev_ptr->dev_self_x = index; - dev_ptr->dev_type = z90crypt.dev_type_array[index]; - if (dev_ptr->dev_type == NILDEV) { - rv = probe_device_type(dev_ptr); - if (rv) { - PRINTK("rv = %d from probe_device_type %d\n", - rv, index); - kfree(dev_ptr->dev_resp_p); - kfree(dev_ptr); - return rv; - } - } - if (dev_ptr->dev_type == PCIXCC_UNK) { - rv = probe_PCIXCC_type(dev_ptr); - if (rv) { - PRINTK("rv = %d from probe_PCIXCC_type %d\n", - rv, index); - kfree(dev_ptr->dev_resp_p); - kfree(dev_ptr); - return rv; - } - } - deviceType = dev_ptr->dev_type; - z90crypt.dev_type_array[index] = deviceType; - if (deviceType == PCICA) - z90crypt.hdware_info->device_type_array[index] = 1; - else if (deviceType == PCICC) - z90crypt.hdware_info->device_type_array[index] = 2; - else if (deviceType == PCIXCC_MCL2) - z90crypt.hdware_info->device_type_array[index] = 3; - else if (deviceType == PCIXCC_MCL3) - z90crypt.hdware_info->device_type_array[index] = 4; - else if (deviceType == CEX2C) - z90crypt.hdware_info->device_type_array[index] = 5; - else if (deviceType == CEX2A) - z90crypt.hdware_info->device_type_array[index] = 6; - else // No idea how this would happen. - z90crypt.hdware_info->device_type_array[index] = -1; - } - - /** - * 'q_depth' returned by the hardware is one less than - * the actual depth - */ - dev_ptr->dev_q_depth = z90crypt.q_depth_array[index]; - dev_ptr->dev_type = z90crypt.dev_type_array[index]; - dev_ptr->dev_stat = devstat; - dev_ptr->disabled = 0; - z90crypt.device_p[index] = dev_ptr; - - if (devstat == DEV_ONLINE) { - if (z90crypt.mask.st_mask[index] != DEV_ONLINE) { - z90crypt.mask.st_mask[index] = DEV_ONLINE; - z90crypt.mask.st_count++; - } - deviceType = dev_ptr->dev_type; - type_str_p = &z90crypt.hdware_info->type_mask[deviceType]; - if (type_str_p->st_mask[index] != DEV_ONLINE) { - type_str_p->st_mask[index] = DEV_ONLINE; - type_str_p->st_count++; - } - } - - return 0; -} - -static int -destroy_crypto_device(int index) -{ - struct device *dev_ptr; - int t, disabledFlag; - - dev_ptr = z90crypt.device_p[index]; - - /* remember device type; get rid of device struct */ - if (dev_ptr) { - disabledFlag = dev_ptr->disabled; - t = dev_ptr->dev_type; - kfree(dev_ptr->dev_resp_p); - kfree(dev_ptr); - } else { - disabledFlag = 0; - t = -1; - } - z90crypt.device_p[index] = 0; - - /* if the type is valid, remove the device from the type_mask */ - if ((t != -1) && z90crypt.hdware_info->type_mask[t].st_mask[index]) { - z90crypt.hdware_info->type_mask[t].st_mask[index] = 0x00; - z90crypt.hdware_info->type_mask[t].st_count--; - if (disabledFlag == 1) - z90crypt.hdware_info->type_mask[t].disabled_count--; - } - if (z90crypt.mask.st_mask[index] != DEV_GONE) { - z90crypt.mask.st_mask[index] = DEV_GONE; - z90crypt.mask.st_count--; - } - z90crypt.hdware_info->device_type_array[index] = 0; - - return 0; -} - -static void -destroy_z90crypt(void) -{ - int i; - - for (i = 0; i < z90crypt.max_count; i++) - if (z90crypt.device_p[i]) - destroy_crypto_device(i); - kfree(z90crypt.hdware_info); - memset((void *)&z90crypt, 0, sizeof(z90crypt)); -} - -static unsigned char static_testmsg[384] = { -0x00,0x00,0x00,0x00,0x01,0x02,0x03,0x04,0x05,0x06,0x07,0x08,0x00,0x06,0x00,0x00, -0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x58, -0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0x00,0x43,0x43, -0x41,0x2d,0x41,0x50,0x50,0x4c,0x20,0x20,0x20,0x01,0x01,0x01,0x00,0x00,0x00,0x00, -0x50,0x4b,0x00,0x00,0x00,0x00,0x01,0x1c,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, -0x00,0x00,0x00,0x00,0x00,0x00,0x05,0xb8,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, -0x00,0x00,0x00,0x00,0x70,0x00,0x41,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x54,0x32, -0x01,0x00,0xa0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, -0xb8,0x05,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, -0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, -0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, -0x00,0x00,0x00,0x00,0x00,0x00,0x0a,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, -0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x08,0x00,0x49,0x43,0x53,0x46, -0x20,0x20,0x20,0x20,0x50,0x4b,0x0a,0x00,0x50,0x4b,0x43,0x53,0x2d,0x31,0x2e,0x32, -0x37,0x00,0x11,0x22,0x33,0x44,0x55,0x66,0x77,0x88,0x99,0x00,0x11,0x22,0x33,0x44, -0x55,0x66,0x77,0x88,0x99,0x00,0x11,0x22,0x33,0x44,0x55,0x66,0x77,0x88,0x99,0x00, -0x11,0x22,0x33,0x44,0x55,0x66,0x77,0x88,0x99,0x00,0x11,0x22,0x33,0x44,0x55,0x66, -0x77,0x88,0x99,0x00,0x11,0x22,0x33,0x5d,0x00,0x5b,0x00,0x77,0x88,0x1e,0x00,0x00, -0x57,0x00,0x00,0x00,0x00,0x04,0x00,0x00,0x4f,0x00,0x00,0x00,0x03,0x02,0x00,0x00, -0x40,0x01,0x00,0x01,0xce,0x02,0x68,0x2d,0x5f,0xa9,0xde,0x0c,0xf6,0xd2,0x7b,0x58, -0x4b,0xf9,0x28,0x68,0x3d,0xb4,0xf4,0xef,0x78,0xd5,0xbe,0x66,0x63,0x42,0xef,0xf8, -0xfd,0xa4,0xf8,0xb0,0x8e,0x29,0xc2,0xc9,0x2e,0xd8,0x45,0xb8,0x53,0x8c,0x6f,0x4e, -0x72,0x8f,0x6c,0x04,0x9c,0x88,0xfc,0x1e,0xc5,0x83,0x55,0x57,0xf7,0xdd,0xfd,0x4f, -0x11,0x36,0x95,0x5d,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00 -}; - -static int -probe_device_type(struct device *devPtr) -{ - int rv, dv, i, index, length; - unsigned char psmid[8]; - static unsigned char loc_testmsg[sizeof(static_testmsg)]; - - index = devPtr->dev_self_x; - rv = 0; - do { - memcpy(loc_testmsg, static_testmsg, sizeof(static_testmsg)); - length = sizeof(static_testmsg) - 24; - /* the -24 allows for the header */ - dv = send_to_AP(index, z90crypt.cdx, length, loc_testmsg); - if (dv) { - PDEBUG("dv returned by send during probe: %d\n", dv); - if (dv == DEV_SEN_EXCEPTION) { - rv = SEN_FATAL_ERROR; - PRINTKC("exception in send to AP %d\n", index); - break; - } - PDEBUG("return value from send_to_AP: %d\n", rv); - switch (dv) { - case DEV_GONE: - PDEBUG("dev %d not available\n", index); - rv = SEN_NOT_AVAIL; - break; - case DEV_ONLINE: - rv = 0; - break; - case DEV_EMPTY: - rv = SEN_NOT_AVAIL; - break; - case DEV_NO_WORK: - rv = SEN_FATAL_ERROR; - break; - case DEV_BAD_MESSAGE: - rv = SEN_USER_ERROR; - break; - case DEV_QUEUE_FULL: - rv = SEN_QUEUE_FULL; - break; - default: - PRINTK("unknown dv=%d for dev %d\n", dv, index); - rv = SEN_NOT_AVAIL; - break; - } - } - - if (rv) - break; - - for (i = 0; i < 6; i++) { - mdelay(300); - dv = receive_from_AP(index, z90crypt.cdx, - devPtr->dev_resp_l, - devPtr->dev_resp_p, psmid); - PDEBUG("dv returned by DQ = %d\n", dv); - if (dv == DEV_REC_EXCEPTION) { - rv = REC_FATAL_ERROR; - PRINTKC("exception in dequeue %d\n", - index); - break; - } - switch (dv) { - case DEV_ONLINE: - rv = 0; - break; - case DEV_EMPTY: - rv = REC_EMPTY; - break; - case DEV_NO_WORK: - rv = REC_NO_WORK; - break; - case DEV_BAD_MESSAGE: - case DEV_GONE: - default: - rv = REC_NO_RESPONSE; - break; - } - if ((rv != 0) && (rv != REC_NO_WORK)) - break; - if (rv == 0) - break; - } - if (rv) - break; - rv = (devPtr->dev_resp_p[0] == 0x00) && - (devPtr->dev_resp_p[1] == 0x86); - if (rv) - devPtr->dev_type = PCICC; - else - devPtr->dev_type = PCICA; - rv = 0; - } while (0); - /* In a general error case, the card is not marked online */ - return rv; -} - -static unsigned char MCL3_testmsg[] = { -0x00,0x00,0x00,0x00,0xEE,0xEE,0xEE,0xEE,0xEE,0xEE,0xEE,0xEE, -0x00,0x06,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, -0x00,0x00,0x00,0x58,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, -0x43,0x41,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, -0x00,0x00,0x00,0x00,0x50,0x4B,0x00,0x00,0x00,0x00,0x01,0xC4,0x00,0x00,0x00,0x00, -0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x07,0x24,0x00,0x00,0x00,0x00, -0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xDC,0x02,0x00,0x00,0x00,0x54,0x32, -0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xE8,0x00,0x00,0x00,0x00,0x00,0x00,0x07,0x24, -0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, -0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, -0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, -0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, -0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, -0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, -0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, -0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, -0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, -0x00,0x00,0x00,0x04,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, -0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, -0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, -0x00,0x00,0x00,0x00,0x50,0x4B,0x00,0x0A,0x4D,0x52,0x50,0x20,0x20,0x20,0x20,0x20, -0x00,0x42,0x00,0x01,0x02,0x03,0x04,0x05,0x06,0x07,0x08,0x09,0x0A,0x0B,0x0C,0x0D, -0x0E,0x0F,0x00,0x11,0x22,0x33,0x44,0x55,0x66,0x77,0x88,0x99,0xAA,0xBB,0xCC,0xDD, -0xEE,0xFF,0xFF,0xEE,0xDD,0xCC,0xBB,0xAA,0x99,0x88,0x77,0x66,0x55,0x44,0x33,0x22, -0x11,0x00,0x01,0x23,0x45,0x67,0x89,0xAB,0xCD,0xEF,0xFE,0xDC,0xBA,0x98,0x76,0x54, -0x32,0x10,0x00,0x9A,0x00,0x98,0x00,0x00,0x1E,0x00,0x00,0x94,0x00,0x00,0x00,0x00, -0x04,0x00,0x00,0x8C,0x00,0x00,0x00,0x40,0x02,0x00,0x00,0x40,0xBA,0xE8,0x23,0x3C, -0x75,0xF3,0x91,0x61,0xD6,0x73,0x39,0xCF,0x7B,0x6D,0x8E,0x61,0x97,0x63,0x9E,0xD9, -0x60,0x55,0xD6,0xC7,0xEF,0xF8,0x1E,0x63,0x95,0x17,0xCC,0x28,0x45,0x60,0x11,0xC5, -0xC4,0x4E,0x66,0xC6,0xE6,0xC3,0xDE,0x8A,0x19,0x30,0xCF,0x0E,0xD7,0xAA,0xDB,0x01, -0xD8,0x00,0xBB,0x8F,0x39,0x9F,0x64,0x28,0xF5,0x7A,0x77,0x49,0xCC,0x6B,0xA3,0x91, -0x97,0x70,0xE7,0x60,0x1E,0x39,0xE1,0xE5,0x33,0xE1,0x15,0x63,0x69,0x08,0x80,0x4C, -0x67,0xC4,0x41,0x8F,0x48,0xDF,0x26,0x98,0xF1,0xD5,0x8D,0x88,0xD9,0x6A,0xA4,0x96, -0xC5,0x84,0xD9,0x30,0x49,0x67,0x7D,0x19,0xB1,0xB3,0x45,0x4D,0xB2,0x53,0x9A,0x47, -0x3C,0x7C,0x55,0xBF,0xCC,0x85,0x00,0x36,0xF1,0x3D,0x93,0x53 -}; - -static int -probe_PCIXCC_type(struct device *devPtr) -{ - int rv, dv, i, index, length; - unsigned char psmid[8]; - static unsigned char loc_testmsg[548]; - struct CPRBX *cprbx_p; - - index = devPtr->dev_self_x; - rv = 0; - do { - memcpy(loc_testmsg, MCL3_testmsg, sizeof(MCL3_testmsg)); - length = sizeof(MCL3_testmsg) - 0x0C; - dv = send_to_AP(index, z90crypt.cdx, length, loc_testmsg); - if (dv) { - PDEBUG("dv returned = %d\n", dv); - if (dv == DEV_SEN_EXCEPTION) { - rv = SEN_FATAL_ERROR; - PRINTKC("exception in send to AP %d\n", index); - break; - } - PDEBUG("return value from send_to_AP: %d\n", rv); - switch (dv) { - case DEV_GONE: - PDEBUG("dev %d not available\n", index); - rv = SEN_NOT_AVAIL; - break; - case DEV_ONLINE: - rv = 0; - break; - case DEV_EMPTY: - rv = SEN_NOT_AVAIL; - break; - case DEV_NO_WORK: - rv = SEN_FATAL_ERROR; - break; - case DEV_BAD_MESSAGE: - rv = SEN_USER_ERROR; - break; - case DEV_QUEUE_FULL: - rv = SEN_QUEUE_FULL; - break; - default: - PRINTK("unknown dv=%d for dev %d\n", dv, index); - rv = SEN_NOT_AVAIL; - break; - } - } - - if (rv) - break; - - for (i = 0; i < 6; i++) { - mdelay(300); - dv = receive_from_AP(index, z90crypt.cdx, - devPtr->dev_resp_l, - devPtr->dev_resp_p, psmid); - PDEBUG("dv returned by DQ = %d\n", dv); - if (dv == DEV_REC_EXCEPTION) { - rv = REC_FATAL_ERROR; - PRINTKC("exception in dequeue %d\n", - index); - break; - } - switch (dv) { - case DEV_ONLINE: - rv = 0; - break; - case DEV_EMPTY: - rv = REC_EMPTY; - break; - case DEV_NO_WORK: - rv = REC_NO_WORK; - break; - case DEV_BAD_MESSAGE: - case DEV_GONE: - default: - rv = REC_NO_RESPONSE; - break; - } - if ((rv != 0) && (rv != REC_NO_WORK)) - break; - if (rv == 0) - break; - } - if (rv) - break; - cprbx_p = (struct CPRBX *) (devPtr->dev_resp_p + 48); - if ((cprbx_p->ccp_rtcode == 8) && (cprbx_p->ccp_rscode == 33)) { - devPtr->dev_type = PCIXCC_MCL2; - PDEBUG("device %d is MCL2\n", index); - } else { - devPtr->dev_type = PCIXCC_MCL3; - PDEBUG("device %d is MCL3\n", index); - } - } while (0); - /* In a general error case, the card is not marked online */ - return rv; -} - -module_init(z90crypt_init_module); -module_exit(z90crypt_cleanup_module); |