diff options
Diffstat (limited to 'drivers/scsi/qla2xxx/qla_os.c')
-rw-r--r-- | drivers/scsi/qla2xxx/qla_os.c | 54 |
1 files changed, 17 insertions, 37 deletions
diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c index 22e8714a91f..ea8239dcbbb 100644 --- a/drivers/scsi/qla2xxx/qla_os.c +++ b/drivers/scsi/qla2xxx/qla_os.c @@ -54,13 +54,6 @@ module_param(ql2xloginretrycount, int, S_IRUGO|S_IRUSR); MODULE_PARM_DESC(ql2xloginretrycount, "Specify an alternate value for the NVRAM login retry count."); -#if defined(CONFIG_SCSI_QLA2XXX_EMBEDDED_FIRMWARE) -int ql2xfwloadflash; -module_param(ql2xfwloadflash, int, S_IRUGO|S_IRUSR); -MODULE_PARM_DESC(ql2xfwloadflash, - "Load ISP24xx firmware image from FLASH (onboard memory)."); -#endif - static void qla2x00_free_device(scsi_qla_host_t *); static void qla2x00_config_dma_addressing(scsi_qla_host_t *ha); @@ -1150,18 +1143,22 @@ qla2x00_set_isp_flags(scsi_qla_host_t *ha) case PCI_DEVICE_ID_QLOGIC_ISP2100: ha->device_type |= DT_ISP2100; ha->device_type &= ~DT_EXTENDED_IDS; + ha->fw_srisc_address = RISC_START_ADDRESS_2100; break; case PCI_DEVICE_ID_QLOGIC_ISP2200: ha->device_type |= DT_ISP2200; ha->device_type &= ~DT_EXTENDED_IDS; + ha->fw_srisc_address = RISC_START_ADDRESS_2100; break; case PCI_DEVICE_ID_QLOGIC_ISP2300: ha->device_type |= DT_ISP2300; ha->device_type |= DT_ZIO_SUPPORTED; + ha->fw_srisc_address = RISC_START_ADDRESS_2300; break; case PCI_DEVICE_ID_QLOGIC_ISP2312: ha->device_type |= DT_ISP2312; ha->device_type |= DT_ZIO_SUPPORTED; + ha->fw_srisc_address = RISC_START_ADDRESS_2300; break; case PCI_DEVICE_ID_QLOGIC_ISP2322: ha->device_type |= DT_ISP2322; @@ -1169,26 +1166,33 @@ qla2x00_set_isp_flags(scsi_qla_host_t *ha) if (ha->pdev->subsystem_vendor == 0x1028 && ha->pdev->subsystem_device == 0x0170) ha->device_type |= DT_OEM_001; + ha->fw_srisc_address = RISC_START_ADDRESS_2300; break; case PCI_DEVICE_ID_QLOGIC_ISP6312: ha->device_type |= DT_ISP6312; + ha->fw_srisc_address = RISC_START_ADDRESS_2300; break; case PCI_DEVICE_ID_QLOGIC_ISP6322: ha->device_type |= DT_ISP6322; + ha->fw_srisc_address = RISC_START_ADDRESS_2300; break; case PCI_DEVICE_ID_QLOGIC_ISP2422: ha->device_type |= DT_ISP2422; ha->device_type |= DT_ZIO_SUPPORTED; + ha->fw_srisc_address = RISC_START_ADDRESS_2400; break; case PCI_DEVICE_ID_QLOGIC_ISP2432: ha->device_type |= DT_ISP2432; ha->device_type |= DT_ZIO_SUPPORTED; + ha->fw_srisc_address = RISC_START_ADDRESS_2400; break; case PCI_DEVICE_ID_QLOGIC_ISP5422: ha->device_type |= DT_ISP5422; + ha->fw_srisc_address = RISC_START_ADDRESS_2400; break; case PCI_DEVICE_ID_QLOGIC_ISP5432: ha->device_type |= DT_ISP5432; + ha->fw_srisc_address = RISC_START_ADDRESS_2400; break; } } @@ -1235,7 +1239,7 @@ qla2x00_iospace_config(scsi_qla_host_t *ha) goto iospace_error_exit; } - if (pci_request_regions(ha->pdev, ha->brd_info->drv_name)) { + if (pci_request_regions(ha->pdev, "qla2xxx")) { qla_printk(KERN_WARNING, ha, "Failed to reserve PIO/MMIO regions (%s)\n", pci_name(ha->pdev)); @@ -1317,7 +1321,7 @@ qla24xx_disable_intrs(scsi_qla_host_t *ha) /* * PCI driver interface */ -int qla2x00_probe_one(struct pci_dev *pdev, struct qla_board_info *brd_info) +static int qla2x00_probe_one(struct pci_dev *pdev) { int ret = -ENODEV; device_reg_t __iomem *reg; @@ -1351,8 +1355,7 @@ int qla2x00_probe_one(struct pci_dev *pdev, struct qla_board_info *brd_info) ha->pdev = pdev; ha->host = host; ha->host_no = host->host_no; - ha->brd_info = brd_info; - sprintf(ha->host_str, "%s_%ld", ha->brd_info->drv_name, ha->host_no); + sprintf(ha->host_str, "qla2xxx_%ld", ha->host_no); /* Set ISP-type information. */ qla2x00_set_isp_flags(ha); @@ -1449,10 +1452,6 @@ int qla2x00_probe_one(struct pci_dev *pdev, struct qla_board_info *brd_info) ha->isp_ops.nvram_config = qla24xx_nvram_config; ha->isp_ops.update_fw_options = qla24xx_update_fw_options; ha->isp_ops.load_risc = qla24xx_load_risc; -#if defined(CONFIG_SCSI_QLA2XXX_EMBEDDED_FIRMWARE) - if (ql2xfwloadflash) - ha->isp_ops.load_risc = qla24xx_load_risc_flash; -#endif ha->isp_ops.pci_info_str = qla24xx_pci_info_str; ha->isp_ops.fw_version_str = qla24xx_fw_version_str; ha->isp_ops.intr_handler = qla24xx_intr_handler; @@ -1539,7 +1538,7 @@ int qla2x00_probe_one(struct pci_dev *pdev, struct qla_board_info *brd_info) host->transportt = qla2xxx_transport_template; ret = request_irq(pdev->irq, ha->isp_ops.intr_handler, - SA_INTERRUPT|SA_SHIRQ, ha->brd_info->drv_name, ha); + SA_INTERRUPT|SA_SHIRQ, "qla2xxx", ha); if (ret) { qla_printk(KERN_WARNING, ha, "Failed to reserve interrupt %d already in use.\n", @@ -1637,9 +1636,8 @@ probe_disable_device: probe_out: return ret; } -EXPORT_SYMBOL_GPL(qla2x00_probe_one); -void qla2x00_remove_one(struct pci_dev *pdev) +static void qla2x00_remove_one(struct pci_dev *pdev) { scsi_qla_host_t *ha; @@ -1657,7 +1655,6 @@ void qla2x00_remove_one(struct pci_dev *pdev) pci_set_drvdata(pdev, NULL); } -EXPORT_SYMBOL_GPL(qla2x00_remove_one); static void qla2x00_free_device(scsi_qla_host_t *ha) @@ -2539,14 +2536,6 @@ qla2x00_down_timeout(struct semaphore *sema, unsigned long timeout) return -ETIMEDOUT; } -#if defined(CONFIG_SCSI_QLA2XXX_EMBEDDED_FIRMWARE) - -#define qla2x00_release_firmware() do { } while (0) -#define qla2x00_pci_module_init() (0) -#define qla2x00_pci_module_exit() do { } while (0) - -#else /* !defined(CONFIG_SCSI_QLA2XXX_EMBEDDED_FIRMWARE) */ - /* Firmware interface routines. */ #define FW_BLOBS 5 @@ -2613,10 +2602,6 @@ qla2x00_release_firmware(void) up(&qla_fw_lock); } -static struct qla_board_info qla_board_tbl = { - .drv_name = "qla2xxx", -}; - static struct pci_device_id qla2xxx_pci_tbl[] = { { PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP2100, PCI_ANY_ID, PCI_ANY_ID, }, @@ -2647,7 +2632,7 @@ MODULE_DEVICE_TABLE(pci, qla2xxx_pci_tbl); static int __devinit qla2xxx_probe_one(struct pci_dev *pdev, const struct pci_device_id *id) { - return qla2x00_probe_one(pdev, &qla_board_tbl); + return qla2x00_probe_one(pdev); } static void __devexit @@ -2678,8 +2663,6 @@ qla2x00_pci_module_exit(void) pci_unregister_driver(&qla2xxx_pci_driver); } -#endif - /** * qla2x00_module_init - Module initialization. **/ @@ -2699,9 +2682,6 @@ qla2x00_module_init(void) /* Derive version string. */ strcpy(qla2x00_version_str, QLA2XXX_VERSION); -#if defined(CONFIG_SCSI_QLA2XXX_EMBEDDED_FIRMWARE) - strcat(qla2x00_version_str, "-fw"); -#endif #if DEBUG_QLA2100 strcat(qla2x00_version_str, "-debug"); #endif |