1 files changed, 53 insertions, 66 deletions

diff --git a/drivers/video/aty/radeon_pm.c b/drivers/video/aty/radeon_pm.c
index c4ac2a032fc..c6d7cc76516 100644
--- a/drivers/video/aty/radeon_pm.c
+++ b/drivers/video/aty/radeon_pm.c
@@ -2507,11 +2507,28 @@ static void radeon_reinitialize_QW(struct radeonfb_info *rinfo)
 
 #endif /* CONFIG_PPC_OF */
 
-static void radeon_set_suspend(struct radeonfb_info *rinfo, int suspend)
+static void radeonfb_whack_power_state(struct radeonfb_info *rinfo, pci_power_t state)
 {
 	u16 pwr_cmd;
+
+	for (;;) {
+		pci_read_config_word(rinfo->pdev,
+				     rinfo->pm_reg+PCI_PM_CTRL,
+				     &pwr_cmd);
+		if (pwr_cmd & 2)
+			break;
+		pwr_cmd = (pwr_cmd & ~PCI_PM_CTRL_STATE_MASK) | 2;
+		pci_write_config_word(rinfo->pdev,
+				      rinfo->pm_reg+PCI_PM_CTRL,
+				      pwr_cmd);
+		msleep(500);
+	}
+	rinfo->pdev->current_state = state;
+}
+
+static void radeon_set_suspend(struct radeonfb_info *rinfo, int suspend)
+{
 	u32 tmp;
-	int i;
 
 	if (!rinfo->pm_reg)
 		return;
@@ -2557,32 +2574,19 @@ static void radeon_set_suspend(struct radeonfb_info *rinfo, int suspend)
 			}
 		}
 
-		for (i = 0; i < 64; ++i)
-			pci_read_config_dword(rinfo->pdev, i * 4,
-					      &rinfo->cfg_save[i]);
-
 		/* Switch PCI power management to D2. */
 		pci_disable_device(rinfo->pdev);
-		for (;;) {
-			pci_read_config_word(
-				rinfo->pdev, rinfo->pm_reg+PCI_PM_CTRL,
-				&pwr_cmd);
-			if (pwr_cmd & 2)
-				break;			
-			pci_write_config_word(
-				rinfo->pdev, rinfo->pm_reg+PCI_PM_CTRL,
-				(pwr_cmd & ~PCI_PM_CTRL_STATE_MASK) | 2);
-			mdelay(500);
-		}
+		pci_save_state(rinfo->pdev);
+		/* The chip seems to need us to whack the PM register
+		 * repeatedly until it sticks. We do that -prior- to
+		 * calling pci_set_power_state()
+		 */
+		radeonfb_whack_power_state(rinfo, PCI_D2);
+		pci_set_power_state(rinfo->pdev, PCI_D2);
 	} else {
 		printk(KERN_DEBUG "radeonfb (%s): switching to D0 state...\n",
 		       pci_name(rinfo->pdev));
 
-		/* Switch back PCI powermanagment to D0 */
-		mdelay(200);
-		pci_write_config_word(rinfo->pdev, rinfo->pm_reg+PCI_PM_CTRL, 0);
-		mdelay(500);
-
 		if (rinfo->family <= CHIP_FAMILY_RV250) {
 			/* Reset the SDRAM controller  */
 			radeon_pm_full_reset_sdram(rinfo);
@@ -2598,37 +2602,10 @@ static void radeon_set_suspend(struct radeonfb_info *rinfo, int suspend)
 	}
 }
 
-static int radeon_restore_pci_cfg(struct radeonfb_info *rinfo)
-{
-	int i;
-	static u32 radeon_cfg_after_resume[64];
-
-	for (i = 0; i < 64; ++i)
-		pci_read_config_dword(rinfo->pdev, i * 4,
-				      &radeon_cfg_after_resume[i]);
-
-	if (radeon_cfg_after_resume[PCI_BASE_ADDRESS_0/4]
-	    == rinfo->cfg_save[PCI_BASE_ADDRESS_0/4])
-		return 0;	/* assume everything is ok */
-
-	for (i = PCI_BASE_ADDRESS_0/4; i < 64; ++i) {
-		if (radeon_cfg_after_resume[i] != rinfo->cfg_save[i])
-			pci_write_config_dword(rinfo->pdev, i * 4,
-					       rinfo->cfg_save[i]);
-	}
-	pci_write_config_word(rinfo->pdev, PCI_CACHE_LINE_SIZE,
-			      rinfo->cfg_save[PCI_CACHE_LINE_SIZE/4]);
-	pci_write_config_word(rinfo->pdev, PCI_COMMAND,
-			      rinfo->cfg_save[PCI_COMMAND/4]);
-	return 1;
-}
-
-
 int radeonfb_pci_suspend(struct pci_dev *pdev, pm_message_t mesg)
 {
         struct fb_info *info = pci_get_drvdata(pdev);
         struct radeonfb_info *rinfo = info->par;
-	int i;
 
 	if (mesg.event == pdev->dev.power.power_state.event)
 		return 0;
@@ -2674,6 +2651,11 @@ int radeonfb_pci_suspend(struct pci_dev *pdev, pm_message_t mesg)
 	pmac_suspend_agp_for_card(pdev);
 #endif /* CONFIG_PPC_PMAC */
 
+	/* It's unclear whether or when the generic code will do that, so let's
+	 * do it ourselves. We save state before we do any power management
+	 */
+	pci_save_state(pdev);
+
 	/* If we support wakeup from poweroff, we save all regs we can including cfg
 	 * space
 	 */
@@ -2698,9 +2680,6 @@ int radeonfb_pci_suspend(struct pci_dev *pdev, pm_message_t mesg)
 			mdelay(20);
 			OUTREG(LVDS_GEN_CNTL, INREG(LVDS_GEN_CNTL) & ~(LVDS_DIGON));
 		}
-		// FIXME: Use PCI layer
-		for (i = 0; i < 64; ++i)
-			pci_read_config_dword(pdev, i * 4, &rinfo->cfg_save[i]);
 		pci_disable_device(pdev);
 	}
 	/* If we support D2, we go to it (should be fixed later with a flag forcing
@@ -2717,6 +2696,13 @@ int radeonfb_pci_suspend(struct pci_dev *pdev, pm_message_t mesg)
 	return 0;
 }
 
+static int radeon_check_power_loss(struct radeonfb_info *rinfo)
+{
+	return rinfo->save_regs[4] != INPLL(CLK_PIN_CNTL) ||
+	       rinfo->save_regs[2] != INPLL(MCLK_CNTL) ||
+	       rinfo->save_regs[3] != INPLL(SCLK_CNTL);
+}
+
 int radeonfb_pci_resume(struct pci_dev *pdev)
 {
         struct fb_info *info = pci_get_drvdata(pdev);
@@ -2735,20 +2721,13 @@ int radeonfb_pci_resume(struct pci_dev *pdev)
 	printk(KERN_DEBUG "radeonfb (%s): resuming from state: %d...\n",
 	       pci_name(pdev), pdev->dev.power.power_state.event);
 
-
-	if (pci_enable_device(pdev)) {
-		rc = -ENODEV;
-		printk(KERN_ERR "radeonfb (%s): can't enable PCI device !\n",
-		       pci_name(pdev));
-		goto bail;
-	}
-	pci_set_master(pdev);
-
+	/* PCI state will have been restored by the core, so
+	 * we should be in D0 now with our config space fully
+	 * restored
+	 */
 	if (pdev->dev.power.power_state.event == PM_EVENT_SUSPEND) {
-		/* Wakeup chip. Check from config space if we were powered off
-		 * (todo: additionally, check CLK_PIN_CNTL too)
-		 */
-		if ((rinfo->pm_mode & radeon_pm_off) && radeon_restore_pci_cfg(rinfo)) {
+		/* Wakeup chip */
+		if ((rinfo->pm_mode & radeon_pm_off) && radeon_check_power_loss(rinfo)) {
 			if (rinfo->reinit_func != NULL)
 				rinfo->reinit_func(rinfo);
 			else {
@@ -2807,12 +2786,13 @@ int radeonfb_pci_resume(struct pci_dev *pdev)
 	return rc;
 }
 
-#ifdef CONFIG_PPC_OF
+#ifdef CONFIG_PPC_OF__disabled
 static void radeonfb_early_resume(void *data)
 {
         struct radeonfb_info *rinfo = data;
 
 	rinfo->no_schedule = 1;
+	pci_restore_state(rinfo->pdev);
 	radeonfb_pci_resume(rinfo->pdev);
 	rinfo->no_schedule = 0;
 }
@@ -2879,7 +2859,14 @@ void radeonfb_pm_init(struct radeonfb_info *rinfo, int dynclk, int ignore_devlis
 		 */
 		if (rinfo->pm_mode != radeon_pm_none) {
 			pmac_call_feature(PMAC_FTR_DEVICE_CAN_WAKE, rinfo->of_node, 0, 1);
+#if 0 /* Disable the early video resume hack for now as it's causing problems, among
+       * others we now rely on the PCI core restoring the config space for us, which
+       * isn't the case with that hack, and that code path causes various things to
+       * be called with interrupts off while they shouldn't. I'm leaving the code in
+       * as it can be useful for debugging purposes
+       */
 			pmac_set_early_video_resume(radeonfb_early_resume, rinfo);
+#endif
 		}
 
 #if 0