diff options
Diffstat (limited to 'drivers')
44 files changed, 9138 insertions, 97 deletions
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig index 96dda81c922..6b4c484a699 100644 --- a/drivers/gpio/Kconfig +++ b/drivers/gpio/Kconfig @@ -155,6 +155,13 @@ config GPIO_TWL4030 Say yes here to access the GPIO signals of various multi-function power management chips from Texas Instruments. +config GPIO_WM831X + tristate "WM831x GPIOs" + depends on MFD_WM831X + help + Say yes here to access the GPIO signals of WM831x power management + chips from Wolfson Microelectronics. + comment "PCI GPIO expanders:" config GPIO_BT8XX diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile index 9244c6fcd8b..ea7c745f26a 100644 --- a/drivers/gpio/Makefile +++ b/drivers/gpio/Makefile @@ -14,3 +14,4 @@ obj-$(CONFIG_GPIO_TWL4030) += twl4030-gpio.o obj-$(CONFIG_GPIO_XILINX) += xilinx_gpio.o obj-$(CONFIG_GPIO_BT8XX) += bt8xxgpio.o obj-$(CONFIG_GPIO_VR41XX) += vr41xx_giu.o +obj-$(CONFIG_GPIO_WM831X) += wm831x-gpio.o diff --git a/drivers/gpio/wm831x-gpio.c b/drivers/gpio/wm831x-gpio.c new file mode 100644 index 00000000000..f9c09a54ec7 --- /dev/null +++ b/drivers/gpio/wm831x-gpio.c @@ -0,0 +1,252 @@ +/* + * wm831x-gpio.c -- gpiolib support for Wolfson WM831x PMICs + * + * Copyright 2009 Wolfson Microelectronics PLC. + * + * Author: Mark Brown <broonie@opensource.wolfsonmicro.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/gpio.h> +#include <linux/mfd/core.h> +#include <linux/platform_device.h> +#include <linux/seq_file.h> + +#include <linux/mfd/wm831x/core.h> +#include <linux/mfd/wm831x/pdata.h> +#include <linux/mfd/wm831x/gpio.h> + +#define WM831X_GPIO_MAX 16 + +struct wm831x_gpio { + struct wm831x *wm831x; + struct gpio_chip gpio_chip; +}; + +static inline struct wm831x_gpio *to_wm831x_gpio(struct gpio_chip *chip) +{ + return container_of(chip, struct wm831x_gpio, gpio_chip); +} + +static int wm831x_gpio_direction_in(struct gpio_chip *chip, unsigned offset) +{ + struct wm831x_gpio *wm831x_gpio = to_wm831x_gpio(chip); + struct wm831x *wm831x = wm831x_gpio->wm831x; + + return wm831x_set_bits(wm831x, WM831X_GPIO1_CONTROL + offset, + WM831X_GPN_DIR | WM831X_GPN_TRI, + WM831X_GPN_DIR); +} + +static int wm831x_gpio_get(struct gpio_chip *chip, unsigned offset) +{ + struct wm831x_gpio *wm831x_gpio = to_wm831x_gpio(chip); + struct wm831x *wm831x = wm831x_gpio->wm831x; + int ret; + + ret = wm831x_reg_read(wm831x, WM831X_GPIO_LEVEL); + if (ret < 0) + return ret; + + if (ret & 1 << offset) + return 1; + else + return 0; +} + +static int wm831x_gpio_direction_out(struct gpio_chip *chip, + unsigned offset, int value) +{ + struct wm831x_gpio *wm831x_gpio = to_wm831x_gpio(chip); + struct wm831x *wm831x = wm831x_gpio->wm831x; + + return wm831x_set_bits(wm831x, WM831X_GPIO1_CONTROL + offset, + WM831X_GPN_DIR | WM831X_GPN_TRI, 0); +} + +static void wm831x_gpio_set(struct gpio_chip *chip, unsigned offset, int value) +{ + struct wm831x_gpio *wm831x_gpio = to_wm831x_gpio(chip); + struct wm831x *wm831x = wm831x_gpio->wm831x; + + wm831x_set_bits(wm831x, WM831X_GPIO_LEVEL, 1 << offset, + value << offset); +} + +#ifdef CONFIG_DEBUG_FS +static void wm831x_gpio_dbg_show(struct seq_file *s, struct gpio_chip *chip) +{ + struct wm831x_gpio *wm831x_gpio = to_wm831x_gpio(chip); + struct wm831x *wm831x = wm831x_gpio->wm831x; + int i; + + for (i = 0; i < chip->ngpio; i++) { + int gpio = i + chip->base; + int reg; + const char *label, *pull, *powerdomain; + + /* We report the GPIO even if it's not requested since + * we're also reporting things like alternate + * functions which apply even when the GPIO is not in + * use as a GPIO. + */ + label = gpiochip_is_requested(chip, i); + if (!label) + label = "Unrequested"; + + seq_printf(s, " gpio-%-3d (%-20.20s) ", gpio, label); + + reg = wm831x_reg_read(wm831x, WM831X_GPIO1_CONTROL + i); + if (reg < 0) { + dev_err(wm831x->dev, + "GPIO control %d read failed: %d\n", + gpio, reg); + seq_printf(s, "\n"); + continue; + } + + switch (reg & WM831X_GPN_PULL_MASK) { + case WM831X_GPIO_PULL_NONE: + pull = "nopull"; + break; + case WM831X_GPIO_PULL_DOWN: + pull = "pulldown"; + break; + case WM831X_GPIO_PULL_UP: + pull = "pullup"; + default: + pull = "INVALID PULL"; + break; + } + + switch (i + 1) { + case 1 ... 3: + case 7 ... 9: + if (reg & WM831X_GPN_PWR_DOM) + powerdomain = "VPMIC"; + else + powerdomain = "DBVDD"; + break; + + case 4 ... 6: + case 10 ... 12: + if (reg & WM831X_GPN_PWR_DOM) + powerdomain = "SYSVDD"; + else + powerdomain = "DBVDD"; + break; + + case 13 ... 16: + powerdomain = "TPVDD"; + break; + + default: + BUG(); + break; + } + + seq_printf(s, " %s %s %s %s%s\n" + " %s%s (0x%4x)\n", + reg & WM831X_GPN_DIR ? "in" : "out", + wm831x_gpio_get(chip, i) ? "high" : "low", + pull, + powerdomain, + reg & WM831X_GPN_POL ? " inverted" : "", + reg & WM831X_GPN_OD ? "open-drain" : "CMOS", + reg & WM831X_GPN_TRI ? " tristated" : "", + reg); + } +} +#else +#define wm831x_gpio_dbg_show NULL +#endif + +static struct gpio_chip template_chip = { + .label = "wm831x", + .owner = THIS_MODULE, + .direction_input = wm831x_gpio_direction_in, + .get = wm831x_gpio_get, + .direction_output = wm831x_gpio_direction_out, + .set = wm831x_gpio_set, + .dbg_show = wm831x_gpio_dbg_show, + .can_sleep = 1, +}; + +static int __devinit wm831x_gpio_probe(struct platform_device *pdev) +{ + struct wm831x *wm831x = dev_get_drvdata(pdev->dev.parent); + struct wm831x_pdata *pdata = wm831x->dev->platform_data; + struct wm831x_gpio *wm831x_gpio; + int ret; + + wm831x_gpio = kzalloc(sizeof(*wm831x_gpio), GFP_KERNEL); + if (wm831x_gpio == NULL) + return -ENOMEM; + + wm831x_gpio->wm831x = wm831x; + wm831x_gpio->gpio_chip = template_chip; + wm831x_gpio->gpio_chip.ngpio = WM831X_GPIO_MAX; + wm831x_gpio->gpio_chip.dev = &pdev->dev; + if (pdata && pdata->gpio_base) + wm831x_gpio->gpio_chip.base = pdata->gpio_base; + else + wm831x_gpio->gpio_chip.base = -1; + + ret = gpiochip_add(&wm831x_gpio->gpio_chip); + if (ret < 0) { + dev_err(&pdev->dev, "Could not register gpiochip, %d\n", + ret); + goto err; + } + + platform_set_drvdata(pdev, wm831x_gpio); + + return ret; + +err: + kfree(wm831x_gpio); + return ret; +} + +static int __devexit wm831x_gpio_remove(struct platform_device *pdev) +{ + struct wm831x_gpio *wm831x_gpio = platform_get_drvdata(pdev); + int ret; + + ret = gpiochip_remove(&wm831x_gpio->gpio_chip); + if (ret == 0) + kfree(wm831x_gpio); + + return ret; +} + +static struct platform_driver wm831x_gpio_driver = { + .driver.name = "wm831x-gpio", + .driver.owner = THIS_MODULE, + .probe = wm831x_gpio_probe, + .remove = __devexit_p(wm831x_gpio_remove), +}; + +static int __init wm831x_gpio_init(void) +{ + return platform_driver_register(&wm831x_gpio_driver); +} +subsys_initcall(wm831x_gpio_init); + +static void __exit wm831x_gpio_exit(void) +{ + platform_driver_unregister(&wm831x_gpio_driver); +} +module_exit(wm831x_gpio_exit); + +MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>"); +MODULE_DESCRIPTION("GPIO interface for WM831x PMICs"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:wm831x-gpio"); diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig index 461abb1e273..ed7711d11ae 100644 --- a/drivers/hwmon/Kconfig +++ b/drivers/hwmon/Kconfig @@ -946,6 +946,27 @@ config SENSORS_W83627EHF This driver can also be built as a module. If so, the module will be called w83627ehf. +config SENSORS_WM831X + tristate "WM831x PMICs" + depends on MFD_WM831X + help + If you say yes here you get support for the hardware + monitoring functionality of the Wolfson Microelectronics + WM831x series of PMICs. + + This driver can also be built as a module. If so, the module + will be called wm831x-hwmon. + +config SENSORS_WM8350 + tristate "Wolfson Microelectronics WM835x" + depends on MFD_WM8350 + help + If you say yes here you get support for the hardware + monitoring features of the WM835x series of PMICs. + + This driver can also be built as a module. If so, the module + will be called wm8350-hwmon. + config SENSORS_ULTRA45 tristate "Sun Ultra45 PIC16F747" depends on SPARC64 diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile index 2e547881bc0..bcf73a9bb61 100644 --- a/drivers/hwmon/Makefile +++ b/drivers/hwmon/Makefile @@ -93,6 +93,8 @@ obj-$(CONFIG_SENSORS_VT8231) += vt8231.o obj-$(CONFIG_SENSORS_W83627EHF) += w83627ehf.o obj-$(CONFIG_SENSORS_W83L785TS) += w83l785ts.o obj-$(CONFIG_SENSORS_W83L786NG) += w83l786ng.o +obj-$(CONFIG_SENSORS_WM831X) += wm831x-hwmon.o +obj-$(CONFIG_SENSORS_WM8350) += wm8350-hwmon.o ifeq ($(CONFIG_HWMON_DEBUG_CHIP),y) EXTRA_CFLAGS += -DDEBUG diff --git a/drivers/hwmon/wm831x-hwmon.c b/drivers/hwmon/wm831x-hwmon.c new file mode 100644 index 00000000000..c16e9e74c35 --- /dev/null +++ b/drivers/hwmon/wm831x-hwmon.c @@ -0,0 +1,226 @@ +/* + * drivers/hwmon/wm831x-hwmon.c - Wolfson Microelectronics WM831x PMIC + * hardware monitoring features. + * + * Copyright (C) 2009 Wolfson Microelectronics plc + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License v2 as published by the + * Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/err.h> +#include <linux/hwmon.h> +#include <linux/hwmon-sysfs.h> + +#include <linux/mfd/wm831x/core.h> +#include <linux/mfd/wm831x/auxadc.h> + +struct wm831x_hwmon { + struct wm831x *wm831x; + struct device *classdev; +}; + +static ssize_t show_name(struct device *dev, + struct device_attribute *attr, char *buf) +{ + return sprintf(buf, "wm831x\n"); +} + +static const char *input_names[] = { + [WM831X_AUX_SYSVDD] = "SYSVDD", + [WM831X_AUX_USB] = "USB", + [WM831X_AUX_BKUP_BATT] = "Backup battery", + [WM831X_AUX_BATT] = "Battery", + [WM831X_AUX_WALL] = "WALL", + [WM831X_AUX_CHIP_TEMP] = "PMIC", + [WM831X_AUX_BATT_TEMP] = "Battery", +}; + + +static ssize_t show_voltage(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct wm831x_hwmon *hwmon = dev_get_drvdata(dev); + int channel = to_sensor_dev_attr(attr)->index; + int ret; + + ret = wm831x_auxadc_read_uv(hwmon->wm831x, channel); + if (ret < 0) + return ret; + + return sprintf(buf, "%d\n", DIV_ROUND_CLOSEST(ret, 1000)); +} + +static ssize_t show_chip_temp(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct wm831x_hwmon *hwmon = dev_get_drvdata(dev); + int channel = to_sensor_dev_attr(attr)->index; + int ret; + + ret = wm831x_auxadc_read(hwmon->wm831x, channel); + if (ret < 0) + return ret; + + /* Degrees celsius = (512.18-ret) / 1.0983 */ + ret = 512180 - (ret * 1000); + ret = DIV_ROUND_CLOSEST(ret * 10000, 10983); + + return sprintf(buf, "%d\n", ret); +} + +static ssize_t show_label(struct device *dev, + struct device_attribute *attr, char *buf) +{ + int channel = to_sensor_dev_attr(attr)->index; + + return sprintf(buf, "%s\n", input_names[channel]); +} + +#define WM831X_VOLTAGE(id, name) \ + static SENSOR_DEVICE_ATTR(in##id##_input, S_IRUGO, show_voltage, \ + NULL, name) + +#define WM831X_NAMED_VOLTAGE(id, name) \ + WM831X_VOLTAGE(id, name); \ + static SENSOR_DEVICE_ATTR(in##id##_label, S_IRUGO, show_label, \ + NULL, name) + +static DEVICE_ATTR(name, S_IRUGO, show_name, NULL); + +WM831X_VOLTAGE(0, WM831X_AUX_AUX1); +WM831X_VOLTAGE(1, WM831X_AUX_AUX2); +WM831X_VOLTAGE(2, WM831X_AUX_AUX3); +WM831X_VOLTAGE(3, WM831X_AUX_AUX4); + +WM831X_NAMED_VOLTAGE(4, WM831X_AUX_SYSVDD); +WM831X_NAMED_VOLTAGE(5, WM831X_AUX_USB); +WM831X_NAMED_VOLTAGE(6, WM831X_AUX_BATT); +WM831X_NAMED_VOLTAGE(7, WM831X_AUX_WALL); +WM831X_NAMED_VOLTAGE(8, WM831X_AUX_BKUP_BATT); + +static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_chip_temp, NULL, + WM831X_AUX_CHIP_TEMP); +static SENSOR_DEVICE_ATTR(temp1_label, S_IRUGO, show_label, NULL, + WM831X_AUX_CHIP_TEMP); +/* Report as a voltage since conversion depends on external components + * and that's what the ABI wants. */ +static SENSOR_DEVICE_ATTR(temp2_input, S_IRUGO, show_voltage, NULL, + WM831X_AUX_BATT_TEMP); +static SENSOR_DEVICE_ATTR(temp2_label, S_IRUGO, show_label, NULL, + WM831X_AUX_BATT_TEMP); + +static struct attribute *wm831x_attributes[] = { + &dev_attr_name.attr, + + &sensor_dev_attr_in0_input.dev_attr.attr, + &sensor_dev_attr_in1_input.dev_attr.attr, + &sensor_dev_attr_in2_input.dev_attr.attr, + &sensor_dev_attr_in3_input.dev_attr.attr, + + &sensor_dev_attr_in4_input.dev_attr.attr, + &sensor_dev_attr_in4_label.dev_attr.attr, + &sensor_dev_attr_in5_input.dev_attr.attr, + &sensor_dev_attr_in5_label.dev_attr.attr, + &sensor_dev_attr_in6_input.dev_attr.attr, + &sensor_dev_attr_in6_label.dev_attr.attr, + &sensor_dev_attr_in7_input.dev_attr.attr, + &sensor_dev_attr_in7_label.dev_attr.attr, + &sensor_dev_attr_in8_input.dev_attr.attr, + &sensor_dev_attr_in8_label.dev_attr.attr, + + &sensor_dev_attr_temp1_input.dev_attr.attr, + &sensor_dev_attr_temp1_label.dev_attr.attr, + &sensor_dev_attr_temp2_input.dev_attr.attr, + &sensor_dev_attr_temp2_label.dev_attr.attr, + + NULL +}; + +static const struct attribute_group wm831x_attr_group = { + .attrs = wm831x_attributes, +}; + +static int __devinit wm831x_hwmon_probe(struct platform_device *pdev) +{ + struct wm831x *wm831x = dev_get_drvdata(pdev->dev.parent); + struct wm831x_hwmon *hwmon; + int ret; + + hwmon = kzalloc(sizeof(struct wm831x_hwmon), GFP_KERNEL); + if (!hwmon) + return -ENOMEM; + + hwmon->wm831x = wm831x; + + ret = sysfs_create_group(&pdev->dev.kobj, &wm831x_attr_group); + if (ret) + goto err; + + hwmon->classdev = hwmon_device_register(&pdev->dev); + if (IS_ERR(hwmon->classdev)) { + ret = PTR_ERR(hwmon->classdev); + goto err_sysfs; + } + + platform_set_drvdata(pdev, hwmon); + + return 0; + +err_sysfs: + sysfs_remove_group(&pdev->dev.kobj, &wm831x_attr_group); +err: + kfree(hwmon); + return ret; +} + +static int __devexit wm831x_hwmon_remove(struct platform_device *pdev) +{ + struct wm831x_hwmon *hwmon = platform_get_drvdata(pdev); + + hwmon_device_unregister(hwmon->classdev); + sysfs_remove_group(&pdev->dev.kobj, &wm831x_attr_group); + platform_set_drvdata(pdev, NULL); + kfree(hwmon); + + return 0; +} + +static struct platform_driver wm831x_hwmon_driver = { + .probe = wm831x_hwmon_probe, + .remove = __devexit_p(wm831x_hwmon_remove), + .driver = { + .name = "wm831x-hwmon", + .owner = THIS_MODULE, + }, +}; + +static int __init wm831x_hwmon_init(void) +{ + return platform_driver_register(&wm831x_hwmon_driver); +} +module_init(wm831x_hwmon_init); + +static void __exit wm831x_hwmon_exit(void) +{ + platform_driver_unregister(&wm831x_hwmon_driver); +} +module_exit(wm831x_hwmon_exit); + +MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>"); +MODULE_DESCRIPTION("WM831x Hardware Monitoring"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:wm831x-hwmon"); diff --git a/drivers/hwmon/wm8350-hwmon.c b/drivers/hwmon/wm8350-hwmon.c new file mode 100644 index 00000000000..13290595ca8 --- /dev/null +++ b/drivers/hwmon/wm8350-hwmon.c @@ -0,0 +1,151 @@ +/* + * drivers/hwmon/wm8350-hwmon.c - Wolfson Microelectronics WM8350 PMIC + * hardware monitoring features. + * + * Copyright (C) 2009 Wolfson Microelectronics plc + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License v2 as published by the + * Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/err.h> +#include <linux/platform_device.h> +#include <linux/hwmon.h> +#include <linux/hwmon-sysfs.h> + +#include <linux/mfd/wm8350/core.h> +#include <linux/mfd/wm8350/comparator.h> + +static ssize_t show_name(struct device *dev, + struct device_attribute *attr, char *buf) +{ + return sprintf(buf, "wm8350\n"); +} + +static const char *input_names[] = { + [WM8350_AUXADC_USB] = "USB", + [WM8350_AUXADC_LINE] = "Line", + [WM8350_AUXADC_BATT] = "Battery", +}; + + +static ssize_t show_voltage(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct wm8350 *wm8350 = dev_get_drvdata(dev); + int channel = to_sensor_dev_attr(attr)->index; + int val; + + val = wm8350_read_auxadc(wm8350, channel, 0, 0) * WM8350_AUX_COEFF; + val = DIV_ROUND_CLOSEST(val, 1000); + + return sprintf(buf, "%d\n", val); +} + +static ssize_t show_label(struct device *dev, + struct device_attribute *attr, char *buf) +{ + int channel = to_sensor_dev_attr(attr)->index; + + return sprintf(buf, "%s\n", input_names[channel]); +} + +#define WM8350_NAMED_VOLTAGE(id, name) \ + static SENSOR_DEVICE_ATTR(in##id##_input, S_IRUGO, show_voltage,\ + NULL, name); \ + static SENSOR_DEVICE_ATTR(in##id##_label, S_IRUGO, show_label, \ + NULL, name) + +static DEVICE_ATTR(name, S_IRUGO, show_name, NULL); + +WM8350_NAMED_VOLTAGE(0, WM8350_AUXADC_USB); +WM8350_NAMED_VOLTAGE(1, WM8350_AUXADC_BATT); +WM8350_NAMED_VOLTAGE(2, WM8350_AUXADC_LINE); + +static struct attribute *wm8350_attributes[] = { + &dev_attr_name.attr, + + &sensor_dev_attr_in0_input.dev_attr.attr, + &sensor_dev_attr_in0_label.dev_attr.attr, + &sensor_dev_attr_in1_input.dev_attr.attr, + &sensor_dev_attr_in1_label.dev_attr.attr, + &sensor_dev_attr_in2_input.dev_attr.attr, + &sensor_dev_attr_in2_label.dev_attr.attr, + + NULL, +}; + +static const struct attribute_group wm8350_attr_group = { + .attrs = wm8350_attributes, +}; + +static int __devinit wm8350_hwmon_probe(struct platform_device *pdev) +{ + struct wm8350 *wm8350 = platform_get_drvdata(pdev); + int ret; + + ret = sysfs_create_group(&pdev->dev.kobj, &wm8350_attr_group); + if (ret) + goto err; + + wm8350->hwmon.classdev = hwmon_device_register(&pdev->dev); + if (IS_ERR(wm8350->hwmon.classdev)) { + ret = PTR_ERR(wm8350->hwmon.classdev); + goto err_group; + } + + return 0; + +err_group: + sysfs_remove_group(&pdev->dev.kobj, &wm8350_attr_group); +err: + return ret; +} + +static int __devexit wm8350_hwmon_remove(struct platform_device *pdev) +{ + struct wm8350 *wm8350 = platform_get_drvdata(pdev); + + hwmon_device_unregister(wm8350->hwmon.classdev); + sysfs_remove_group(&pdev->dev.kobj, &wm8350_attr_group); + + return 0; +} + +static struct platform_driver wm8350_hwmon_driver = { + .probe = wm8350_hwmon_probe, + .remove = __devexit_p(wm8350_hwmon_remove), + .driver = { + .name = "wm8350-hwmon", + .owner = THIS_MODULE, + }, +}; + +static int __init wm8350_hwmon_init(void) +{ + return platform_driver_register(&wm8350_hwmon_driver); +} +module_init(wm8350_hwmon_init); + +static void __exit wm8350_hwmon_exit(void) +{ + platform_driver_unregister(&wm8350_hwmon_driver); +} +module_exit(wm8350_hwmon_exit); + +MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>"); +MODULE_DESCRIPTION("WM8350 Hardware Monitoring"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:wm8350-hwmon"); diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig index cbe21bc96b5..1a50be379cb 100644 --- a/drivers/input/misc/Kconfig +++ b/drivers/input/misc/Kconfig @@ -279,4 +279,24 @@ config INPUT_BFIN_ROTARY To compile this driver as a module, choose M here: the module will be called bfin-rotary. +config INPUT_WM831X_ON + tristate "WM831X ON pin" + depends on MFD_WM831X + help + Support the ON pin of WM831X PMICs as an input device + reporting power button status. + + To compile this driver as a module, choose M here: the module + will be called wm831x_on. + +config INPUT_PCAP + tristate "Motorola EZX PCAP misc input events" + depends on EZX_PCAP + help + Say Y here if you want to use Power key and Headphone button + on Motorola EZX phones. + + To compile this driver as a module, choose M here: the + module will be called pcap_keys. + endif diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile index 79c1e9a5ea3..bf4db626c31 100644 --- a/drivers/input/misc/Makefile +++ b/drivers/input/misc/Makefile @@ -16,6 +16,7 @@ obj-$(CONFIG_HP_SDC_RTC) += hp_sdc_rtc.o obj-$(CONFIG_INPUT_IXP4XX_BEEPER) += ixp4xx-beeper.o obj-$(CONFIG_INPUT_KEYSPAN_REMOTE) += keyspan_remote.o obj-$(CONFIG_INPUT_M68K_BEEP) += m68kspkr.o +obj-$(CONFIG_INPUT_PCAP) += pcap_keys.o obj-$(CONFIG_INPUT_PCF50633_PMU) += pcf50633-input.o obj-$(CONFIG_INPUT_PCSPKR) += pcspkr.o obj-$(CONFIG_INPUT_POWERMATE) += powermate.o @@ -26,4 +27,6 @@ obj-$(CONFIG_INPUT_SPARCSPKR) += sparcspkr.o obj-$(CONFIG_INPUT_TWL4030_PWRBUTTON) += twl4030-pwrbutton.o obj-$(CONFIG_INPUT_UINPUT) += uinput.o obj-$(CONFIG_INPUT_WISTRON_BTNS) += wistron_btns.o +obj-$(CONFIG_INPUT_WM831X_ON) += wm831x-on.o obj-$(CONFIG_INPUT_YEALINK) += yealink.o + diff --git a/drivers/input/misc/pcap_keys.c b/drivers/input/misc/pcap_keys.c new file mode 100644 index 00000000000..7ea969347ca --- /dev/null +++ b/drivers/input/misc/pcap_keys.c @@ -0,0 +1,144 @@ +/* + * Input driver for PCAP events: + * * Power key + * * Headphone button + * + * Copyright (c) 2008,2009 Ilya Petrov <ilya.muromec@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/platform_device.h> +#include <linux/input.h> +#include <linux/mfd/ezx-pcap.h> + +struct pcap_keys { + struct pcap_chip *pcap; + struct input_dev *input; +}; + +/* PCAP2 interrupts us on keypress */ +static irqreturn_t pcap_keys_handler(int irq, void *_pcap_keys) +{ + struct pcap_keys *pcap_keys = _pcap_keys; + int pirq = irq_to_pcap(pcap_keys->pcap, irq); + u32 pstat; + + ezx_pcap_read(pcap_keys->pcap, PCAP_REG_PSTAT, &pstat); + pstat &= 1 << pirq; + + switch (pirq) { + case PCAP_IRQ_ONOFF: + input_report_key(pcap_keys->input, KEY_POWER, !pstat); + break; + case PCAP_IRQ_MIC: + input_report_key(pcap_keys->input, KEY_HP, !pstat); + break; + } + + input_sync(pcap_keys->input); + + return IRQ_HANDLED; +} + +static int __devinit pcap_keys_probe(struct platform_device *pdev) +{ + int err = -ENOMEM; + struct pcap_keys *pcap_keys; + struct input_dev *input_dev; + + pcap_keys = kmalloc(sizeof(struct pcap_keys), GFP_KERNEL); + if (!pcap_keys) + return err; + + pcap_keys->pcap = dev_get_drvdata(pdev->dev.parent); + + input_dev = input_allocate_device(); + if (!input_dev) + goto fail; + + pcap_keys->input = input_dev; + + platform_set_drvdata(pdev, pcap_keys); + input_dev->name = pdev->name; + input_dev->phys = "pcap-keys/input0"; + input_dev->id.bustype = BUS_HOST; + input_dev->dev.parent = &pdev->dev; + + __set_bit(EV_KEY, input_dev->evbit); + __set_bit(KEY_POWER, input_dev->keybit); + __set_bit(KEY_HP, input_dev->keybit); + + err = input_register_device(input_dev); + if (err) + goto fail_allocate; + + err = request_irq(pcap_to_irq(pcap_keys->pcap, PCAP_IRQ_ONOFF), + pcap_keys_handler, 0, "Power key", pcap_keys); + if (err) + goto fail_register; + + err = request_irq(pcap_to_irq(pcap_keys->pcap, PCAP_IRQ_MIC), + pcap_keys_handler, 0, "Headphone button", pcap_keys); + if (err) + goto fail_pwrkey; + + return 0; + +fail_pwrkey: + free_irq(pcap_to_irq(pcap_keys->pcap, PCAP_IRQ_ONOFF), pcap_keys); +fail_register: + input_unregister_device(input_dev); + goto fail; +fail_allocate: + input_free_device(input_dev); +fail: + kfree(pcap_keys); + return err; +} + +static int __devexit pcap_keys_remove(struct platform_device *pdev) +{ + struct pcap_keys *pcap_keys = platform_get_drvdata(pdev); + + free_irq(pcap_to_irq(pcap_keys->pcap, PCAP_IRQ_ONOFF), pcap_keys); + free_irq(pcap_to_irq(pcap_keys->pcap, PCAP_IRQ_MIC), pcap_keys); + + input_unregister_device(pcap_keys->input); + kfree(pcap_keys); + + return 0; +} + +static struct platform_driver pcap_keys_device_driver = { + .probe = pcap_keys_probe, + .remove = __devexit_p(pcap_keys_remove), + .driver = { + .name = "pcap-keys", + .owner = THIS_MODULE, + } +}; + +static int __init pcap_keys_init(void) +{ + return platform_driver_register(&pcap_keys_device_driver); +}; + +static void __exit pcap_keys_exit(void) +{ + platform_driver_unregister(&pcap_keys_device_driver); +}; + +module_init(pcap_keys_init); +module_exit(pcap_keys_exit); + +MODULE_DESCRIPTION("Motorola PCAP2 input events driver"); +MODULE_AUTHOR("Ilya Petrov <ilya.muromec@gmail.com>"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:pcap_keys"); diff --git a/drivers/input/misc/wm831x-on.c b/drivers/input/misc/wm831x-on.c new file mode 100644 index 00000000000..ba4f5dd7c60 --- /dev/null +++ b/drivers/input/misc/wm831x-on.c @@ -0,0 +1,163 @@ +/** + * wm831x-on.c - WM831X ON pin driver + * + * Copyright (C) 2009 Wolfson Microelectronics plc + * + * This file is subject to the terms and conditions of the GNU General + * Public License. See the file "COPYING" in the main directory of this + * archive for more details. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/errno.h> +#include <linux/input.h> +#include <linux/interrupt.h> +#include <linux/platform_device.h> +#include <linux/workqueue.h> +#include <linux/mfd/wm831x/core.h> + +struct wm831x_on { + struct input_dev *dev; + struct delayed_work work; + struct wm831x *wm831x; +}; + +/* + * The chip gives us an interrupt when the ON pin is asserted but we + * then need to poll to see when the pin is deasserted. + */ +static void wm831x_poll_on(struct work_struct *work) +{ + struct wm831x_on *wm831x_on = container_of(work, struct wm831x_on, + work.work); + struct wm831x *wm831x = wm831x_on->wm831x; + int poll, ret; + + ret = wm831x_reg_read(wm831x, WM831X_ON_PIN_CONTROL); + if (ret >= 0) { + poll = !(ret & WM831X_ON_PIN_STS); + + input_report_key(wm831x_on->dev, KEY_POWER, poll); + input_sync(wm831x_on->dev); + } else { + dev_err(wm831x->dev, "Failed to read ON status: %d\n", ret); + poll = 1; + } + + if (poll) + schedule_delayed_work(&wm831x_on->work, 100); +} + +static irqreturn_t wm831x_on_irq(int irq, void *data) +{ + struct wm831x_on *wm831x_on = data; + + schedule_delayed_work(&wm831x_on->work, 0); + + return IRQ_HANDLED; +} + +static int __devinit wm831x_on_probe(struct platform_device *pdev) +{ + struct wm831x *wm831x = dev_get_drvdata(pdev->dev.parent); + struct wm831x_on *wm831x_on; + int irq = platform_get_irq(pdev, 0); + int ret; + + wm831x_on = kzalloc(sizeof(struct wm831x_on), GFP_KERNEL); + if (!wm831x_on) { + dev_err(&pdev->dev, "Can't allocate data\n"); + return -ENOMEM; + } + + wm831x_on->wm831x = wm831x; + INIT_DELAYED_WORK(&wm831x_on->work, wm831x_poll_on); + + wm831x_on->dev = input_allocate_device(); + if (!wm831x_on->dev) { + dev_err(&pdev->dev, "Can't allocate input dev\n"); + ret = -ENOMEM; + goto err; + } + + wm831x_on->dev->evbit[0] = BIT_MASK(EV_KEY); + wm831x_on->dev->keybit[BIT_WORD(KEY_POWER)] = BIT_MASK(KEY_POWER); + wm831x_on->dev->name = "wm831x_on"; + wm831x_on->dev->phys = "wm831x_on/input0"; + wm831x_on->dev->dev.parent = &pdev->dev; + + ret = wm831x_request_irq(wm831x, irq, wm831x_on_irq, + IRQF_TRIGGER_RISING, "wm831x_on", wm831x_on); + if (ret < 0) { + dev_err(&pdev->dev, "Unable to request IRQ: %d\n", ret); + goto err_input_dev; + } + ret = input_register_device(wm831x_on->dev); + if (ret) { + dev_dbg(&pdev->dev, "Can't register input device: %d\n", ret); + goto err_irq; + } + + platform_set_drvdata(pdev, wm831x_on); + + return 0; + +err_irq: + wm831x_free_irq(wm831x, irq, NULL); +err_input_dev: + input_free_device(wm831x_on->dev); +err: + kfree(wm831x_on); + return ret; +} + +static int __devexit wm831x_on_remove(struct platform_device *pdev) +{ + struct wm831x_on *wm831x_on = platform_get_drvdata(pdev); + int irq = platform_get_irq(pdev, 0); + + wm831x_free_irq(wm831x_on->wm831x, irq, wm831x_on); + cancel_delayed_work_sync(&wm831x_on->work); + input_unregister_device(wm831x_on->dev); + kfree(wm831x_on); + + return 0; +} + +static struct platform_driver wm831x_on_driver = { + .probe = wm831x_on_probe, + .remove = __devexit_p(wm831x_on_remove), + .driver = { + .name = "wm831x-on", + .owner = THIS_MODULE, + }, +}; + +static int __init wm831x_on_init(void) +{ + return platform_driver_register(&wm831x_on_driver); +} +module_init(wm831x_on_init); + +static void __exit wm831x_on_exit(void) +{ + platform_driver_unregister(&wm831x_on_driver); +} +module_exit(wm831x_on_exit); + +MODULE_ALIAS("platform:wm831x-on"); +MODULE_DESCRIPTION("WM831x ON pin"); +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>"); + diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig index 87a1ae63bcc..ab02d72afbf 100644 --- a/drivers/input/touchscreen/Kconfig +++ b/drivers/input/touchscreen/Kconfig @@ -510,4 +510,13 @@ config TOUCHSCREEN_W90X900 To compile this driver as a module, choose M here: the module will be called w90p910_ts. +config TOUCHSCREEN_PCAP + tristate "Motorola PCAP touchscreen" + depends on EZX_PCAP + help + Say Y here if you have a Motorola EZX telephone and + want to enable support for the built-in touchscreen. + + To compile this driver as a module, choose M here: the + module will be called pcap_ts. endif diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile index 3e1c5e0b952..4599bf7ad81 100644 --- a/drivers/input/touchscreen/Makefile +++ b/drivers/input/touchscreen/Makefile @@ -40,3 +40,4 @@ obj-$(CONFIG_TOUCHSCREEN_WM97XX_ATMEL) += atmel-wm97xx.o obj-$(CONFIG_TOUCHSCREEN_WM97XX_MAINSTONE) += mainstone-wm97xx.o obj-$(CONFIG_TOUCHSCREEN_WM97XX_ZYLONITE) += zylonite-wm97xx.o obj-$(CONFIG_TOUCHSCREEN_W90X900) += w90p910_ts.o +obj-$(CONFIG_TOUCHSCREEN_PCAP) += pcap_ts.o diff --git a/drivers/input/touchscreen/pcap_ts.c b/drivers/input/touchscreen/pcap_ts.c new file mode 100644 index 00000000000..67fcd33595d --- /dev/null +++ b/drivers/input/touchscreen/pcap_ts.c @@ -0,0 +1,271 @@ +/* + * Driver for Motorola PCAP2 touchscreen as found in the EZX phone platform. + * + * Copyright (C) 2006 Harald Welte <laforge@openezx.org> + * Copyright (C) 2009 Daniel Ribeiro <drwyrm@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/fs.h> +#include <linux/string.h> +#include <linux/pm.h> +#include <linux/timer.h> +#include <linux/interrupt.h> +#include <linux/platform_device.h> +#include <linux/input.h> +#include <linux/mfd/ezx-pcap.h> + +struct pcap_ts { + struct pcap_chip *pcap; + struct input_dev *input; + struct delayed_work work; + u16 x, y; + u16 pressure; + u8 read_state; +}; + +#define SAMPLE_DELAY 20 /* msecs */ + +#define X_AXIS_MIN 0 +#define X_AXIS_MAX 1023 +#define Y_AXIS_MAX X_AXIS_MAX +#define Y_AXIS_MIN X_AXIS_MIN +#define PRESSURE_MAX X_AXIS_MAX +#define PRESSURE_MIN X_AXIS_MIN + +static void pcap_ts_read_xy(void *data, u16 res[2]) +{ + struct pcap_ts *pcap_ts = data; + + switch (pcap_ts->read_state) { + case PCAP_ADC_TS_M_PRESSURE: + /* pressure reading is unreliable */ + if (res[0] > PRESSURE_MIN && res[0] < PRESSURE_MAX) + pcap_ts->pressure = res[0]; + pcap_ts->read_state = PCAP_ADC_TS_M_XY; + schedule_delayed_work(&pcap_ts->work, 0); + break; + case PCAP_ADC_TS_M_XY: + pcap_ts->y = res[0]; + pcap_ts->x = res[1]; + if (pcap_ts->x <= X_AXIS_MIN || pcap_ts->x >= X_AXIS_MAX || + pcap_ts->y <= Y_AXIS_MIN || pcap_ts->y >= Y_AXIS_MAX) { + /* pen has been released */ + input_report_abs(pcap_ts->input, ABS_PRESSURE, 0); + input_report_key(pcap_ts->input, BTN_TOUCH, 0); + + pcap_ts->read_state = PCAP_ADC_TS_M_STANDBY; + schedule_delayed_work(&pcap_ts->work, 0); + } else { + /* pen is touching the screen */ + input_report_abs(pcap_ts->input, ABS_X, pcap_ts->x); + input_report_abs(pcap_ts->input, ABS_Y, pcap_ts->y); + input_report_key(pcap_ts->input, BTN_TOUCH, 1); + input_report_abs(pcap_ts->input, ABS_PRESSURE, + pcap_ts->pressure); + + /* switch back to pressure read mode */ + pcap_ts->read_state = PCAP_ADC_TS_M_PRESSURE; + schedule_delayed_work(&pcap_ts->work, + msecs_to_jiffies(SAMPLE_DELAY)); + } + input_sync(pcap_ts->input); + break; + default: + dev_warn(&pcap_ts->input->dev, + "pcap_ts: Warning, unhandled read_state %d\n", + pcap_ts->read_state); + break; + } +} + +static void pcap_ts_work(struct work_struct *work) +{ + struct delayed_work *dw = container_of(work, struct delayed_work, work); + struct pcap_ts *pcap_ts = container_of(dw, struct pcap_ts, work); + u8 ch[2]; + + pcap_set_ts_bits(pcap_ts->pcap, + pcap_ts->read_state << PCAP_ADC_TS_M_SHIFT); + + if (pcap_ts->read_state == PCAP_ADC_TS_M_STANDBY) + return; + + /* start adc conversion */ + ch[0] = PCAP_ADC_CH_TS_X1; + ch[1] = PCAP_ADC_CH_TS_Y1; + pcap_adc_async(pcap_ts->pcap, PCAP_ADC_BANK_1, 0, ch, + pcap_ts_read_xy, pcap_ts); +} + +static irqreturn_t pcap_ts_event_touch(int pirq, void *data) +{ + struct pcap_ts *pcap_ts = data; + + if (pcap_ts->read_state == PCAP_ADC_TS_M_STANDBY) { + pcap_ts->read_state = PCAP_ADC_TS_M_PRESSURE; + schedule_delayed_work(&pcap_ts->work, 0); + } + return IRQ_HANDLED; +} + +static int pcap_ts_open(struct input_dev *dev) +{ + struct pcap_ts *pcap_ts = input_get_drvdata(dev); + + pcap_ts->read_state = PCAP_ADC_TS_M_STANDBY; + schedule_delayed_work(&pcap_ts->work, 0); + + return 0; +} + +static void pcap_ts_close(struct input_dev *dev) +{ + struct pcap_ts *pcap_ts = input_get_drvdata(dev); + + cancel_delayed_work_sync(&pcap_ts->work); + + pcap_ts->read_state = PCAP_ADC_TS_M_NONTS; + pcap_set_ts_bits(pcap_ts->pcap, + pcap_ts->read_state << PCAP_ADC_TS_M_SHIFT); +} + +static int __devinit pcap_ts_probe(struct platform_device *pdev) +{ + struct input_dev *input_dev; + struct pcap_ts *pcap_ts; + int err = -ENOMEM; + + pcap_ts = kzalloc(sizeof(*pcap_ts), GFP_KERNEL); + if (!pcap_ts) + return err; + + pcap_ts->pcap = dev_get_drvdata(pdev->dev.parent); + platform_set_drvdata(pdev, pcap_ts); + + input_dev = input_allocate_device(); + if (!input_dev) + goto fail; + + INIT_DELAYED_WORK(&pcap_ts->work, pcap_ts_work); + + pcap_ts->read_state = PCAP_ADC_TS_M_NONTS; + pcap_set_ts_bits(pcap_ts->pcap, + pcap_ts->read_state << PCAP_ADC_TS_M_SHIFT); + + pcap_ts->input = input_dev; + input_set_drvdata(input_dev, pcap_ts); + + input_dev->name = "pcap-touchscreen"; + input_dev->phys = "pcap_ts/input0"; + input_dev->id.bustype = BUS_HOST; + input_dev->id.vendor = 0x0001; + input_dev->id.product = 0x0002; + input_dev->id.version = 0x0100; + input_dev->dev.parent = &pdev->dev; + input_dev->open = pcap_ts_open; + input_dev->close = pcap_ts_close; + + input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS); + input_dev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH); + input_set_abs_params(input_dev, ABS_X, X_AXIS_MIN, X_AXIS_MAX, 0, 0); + input_set_abs_params(input_dev, ABS_Y, Y_AXIS_MIN, Y_AXIS_MAX, 0, 0); + input_set_abs_params(input_dev, ABS_PRESSURE, PRESSURE_MIN, + PRESSURE_MAX, 0, 0); + + err = input_register_device(pcap_ts->input); + if (err) + goto fail_allocate; + + err = request_irq(pcap_to_irq(pcap_ts->pcap, PCAP_IRQ_TS), + pcap_ts_event_touch, 0, "Touch Screen", pcap_ts); + if (err) + goto fail_register; + + return 0; + +fail_register: + input_unregister_device(input_dev); + goto fail; +fail_allocate: + input_free_device(input_dev); +fail: + kfree(pcap_ts); + + return err; +} + +static int __devexit pcap_ts_remove(struct platform_device *pdev) +{ + struct pcap_ts *pcap_ts = platform_get_drvdata(pdev); + + free_irq(pcap_to_irq(pcap_ts->pcap, PCAP_IRQ_TS), pcap_ts); + cancel_delayed_work_sync(&pcap_ts->work); + + input_unregister_device(pcap_ts->input); + + kfree(pcap_ts); + + return 0; +} + +#ifdef CONFIG_PM +static int pcap_ts_suspend(struct device *dev) +{ + struct pcap_ts *pcap_ts = dev_get_drvdata(dev); + + pcap_set_ts_bits(pcap_ts->pcap, PCAP_ADC_TS_REF_LOWPWR); + return 0; +} + +static int pcap_ts_resume(struct device *dev) +{ + struct pcap_ts *pcap_ts = dev_get_drvdata(dev); + + pcap_set_ts_bits(pcap_ts->pcap, + pcap_ts->read_state << PCAP_ADC_TS_M_SHIFT); + return 0; +} + +static struct dev_pm_ops pcap_ts_pm_ops = { + .suspend = pcap_ts_suspend, + .resume = pcap_ts_resume, +}; +#define PCAP_TS_PM_OPS (&pcap_ts_pm_ops) +#else +#define PCAP_TS_PM_OPS NULL +#endif + +static struct platform_driver pcap_ts_driver = { + .probe = pcap_ts_probe, + .remove = __devexit_p(pcap_ts_remove), + .driver = { + .name = "pcap-ts", + .owner = THIS_MODULE, + .pm = PCAP_TS_PM_OPS, + }, +}; + +static int __init pcap_ts_init(void) +{ + return platform_driver_register(&pcap_ts_driver); +} + +static void __exit pcap_ts_exit(void) +{ + platform_driver_unregister(&pcap_ts_driver); +} + +module_init(pcap_ts_init); +module_exit(pcap_ts_exit); + +MODULE_DESCRIPTION("Motorola PCAP2 touchscreen driver"); +MODULE_AUTHOR("Daniel Ribeiro / Harald Welte"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:pcap_ts"); diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index 491ac0f800d..570be139f9d 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -108,6 +108,19 @@ config TWL4030_CORE high speed USB OTG transceiver, an audio codec (on most versions) and many other features. +config TWL4030_POWER + bool "Support power resources on TWL4030 family chips" + depends on TWL4030_CORE && ARM + help + Say yes here if you want to use the power resources on the + TWL4030 family chips. Most of these resources are regulators, + which have a separate driver; some are control signals, such + as clock request handshaking. + + This driver uses board-specific data to initialize the resources + and load scripts controling which resources are switched off/on + or reset when a sleep, wakeup or warm reset event occurs. + config MFD_TMIO bool default n @@ -157,6 +170,16 @@ config MFD_WM8400 the device, additional drivers must be enabled in order to use the functionality of the device. +config MFD_WM831X + tristate "Support Wolfson Microelectronics WM831x PMICs" + select MFD_CORE + depends on I2C + help + Support for the Wolfson Microelecronics WM831x PMICs. This + driver provides common support for accessing the device, + additional drivers must be enabled in order to use the + functionality of the device. + config MFD_WM8350 tristate @@ -228,6 +251,16 @@ config MFD_PCF50633 facilities, and registers devices for the various functions so that function-specific drivers can bind to them. +config MFD_MC13783 + tristate "Support Freescale MC13783" + depends on SPI_MASTER + select MFD_CORE + help + Support for the Freescale (Atlas) MC13783 PMIC and audio CODEC. + This driver provides common support for accessing the device, + additional drivers must be enabled in order to use the + functionality of the device. + config PCF50633_ADC tristate "Support for NXP PCF50633 ADC" depends on MFD_PCF50633 @@ -256,6 +289,15 @@ config AB3100_CORE LEDs, vibrator, system power and temperature, power management and ALSA sound. +config AB3100_OTP + tristate "ST-Ericsson AB3100 OTP functions" + depends on AB3100_CORE + default y if AB3100_CORE + help + Select this to enable the AB3100 Mixed Signal IC OTP (one-time + programmable memory) support. This exposes a sysfs file to read + out OTP values. + config EZX_PCAP bool "PCAP Support" depends on GENERIC_HARDIRQS && SPI_MASTER diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile index 6f8a9a1af20..f3b277b90d4 100644 --- a/drivers/mfd/Makefile +++ b/drivers/mfd/Makefile @@ -15,6 +15,8 @@ obj-$(CONFIG_MFD_TC6387XB) += tc6387xb.o obj-$(CONFIG_MFD_TC6393XB) += tc6393xb.o obj-$(CONFIG_MFD_WM8400) += wm8400-core.o +wm831x-objs := wm831x-core.o wm831x-irq.o wm831x-otp.o +obj-$(CONFIG_MFD_WM831X) += wm831x.o wm8350-objs := wm8350-core.o wm8350-regmap.o wm8350-gpio.o obj-$(CONFIG_MFD_WM8350) += wm8350.o obj-$(CONFIG_MFD_WM8350_I2C) += wm8350-i2c.o @@ -23,6 +25,9 @@ obj-$(CONFIG_TPS65010) += tps65010.o obj-$(CONFIG_MENELAUS) += menelaus.o obj-$(CONFIG_TWL4030_CORE) += twl4030-core.o twl4030-irq.o +obj-$(CONFIG_TWL4030_POWER) += twl4030-power.o + +obj-$(CONFIG_MFD_MC13783) += mc13783-core.o obj-$(CONFIG_MFD_CORE) += mfd-core.o @@ -44,3 +49,4 @@ obj-$(CONFIG_MFD_PCF50633) += pcf50633-core.o obj-$(CONFIG_PCF50633_ADC) += pcf50633-adc.o obj-$(CONFIG_PCF50633_GPIO) += pcf50633-gpio.o obj-$(CONFIG_AB3100_CORE) += ab3100-core.o +obj-$(CONFIG_AB3100_OTP) += ab3100-otp.o diff --git a/drivers/mfd/ab3100-core.c b/drivers/mfd/ab3100-core.c index 13e7d7bfe85..c533f86ff5e 100644 --- a/drivers/mfd/ab3100-core.c +++ b/drivers/mfd/ab3100-core.c @@ -14,7 +14,6 @@ #include <linux/platform_device.h> #include <linux/device.h> #include <linux/interrupt.h> -#include <linux/workqueue.h> #include <linux/debugfs.h> #include <linux/seq_file.h> #include <linux/uaccess.h> @@ -77,7 +76,7 @@ u8 ab3100_get_chip_type(struct ab3100 *ab3100) } EXPORT_SYMBOL(ab3100_get_chip_type); -int ab3100_set_register(struct ab3100 *ab3100, u8 reg, u8 regval) +int ab3100_set_register_interruptible(struct ab3100 *ab3100, u8 reg, u8 regval) { u8 regandval[2] = {reg, regval}; int err; @@ -107,9 +106,10 @@ int ab3100_set_register(struct ab3100 *ab3100, u8 reg, u8 regval) err = 0; } mutex_unlock(&ab3100->access_mutex); - return 0; + return err; } -EXPORT_SYMBOL(ab3100_set_register); +EXPORT_SYMBOL(ab3100_set_register_interruptible); + /* * The test registers exist at an I2C bus address up one @@ -118,7 +118,7 @@ EXPORT_SYMBOL(ab3100_set_register); * anyway. It's currently only used from this file so declare * it static and do not export. */ -static int ab3100_set_test_register(struct ab3100 *ab3100, +static int ab3100_set_test_register_interruptible(struct ab3100 *ab3100, u8 reg, u8 regval) { u8 regandval[2] = {reg, regval}; @@ -148,7 +148,8 @@ static int ab3100_set_test_register(struct ab3100 *ab3100, return err; } -int ab3100_get_register(struct ab3100 *ab3100, u8 reg, u8 *regval) + +int ab3100_get_register_interruptible(struct ab3100 *ab3100, u8 reg, u8 *regval) { int err; @@ -202,9 +203,10 @@ int ab3100_get_register(struct ab3100 *ab3100, u8 reg, u8 *regval) mutex_unlock(&ab3100->access_mutex); return err; } -EXPORT_SYMBOL(ab3100_get_register); +EXPORT_SYMBOL(ab3100_get_register_interruptible); -int ab3100_get_register_page(struct ab3100 *ab3100, + +int ab3100_get_register_page_interruptible(struct ab3100 *ab3100, u8 first_reg, u8 *regvals, u8 numregs) { int err; @@ -258,9 +260,10 @@ int ab3100_get_register_page(struct ab3100 *ab3100, mutex_unlock(&ab3100->access_mutex); return err; } -EXPORT_SYMBOL(ab3100_get_register_page); +EXPORT_SYMBOL(ab3100_get_register_page_interruptible); + -int ab3100_mask_and_set_register(struct ab3100 *ab3100, +int ab3100_mask_and_set_register_interruptible(struct ab3100 *ab3100, u8 reg, u8 andmask, u8 ormask) { u8 regandval[2] = {reg, 0}; @@ -328,7 +331,8 @@ int ab3100_mask_and_set_register(struct ab3100 *ab3100, mutex_unlock(&ab3100->access_mutex); return err; } -EXPORT_SYMBOL(ab3100_mask_and_set_register); +EXPORT_SYMBOL(ab3100_mask_and_set_register_interruptible); + /* * Register a simple callback for handling any AB3100 events. @@ -371,7 +375,7 @@ static void ab3100_work(struct work_struct *work) u32 fatevent; int err; - err = ab3100_get_register_page(ab3100, AB3100_EVENTA1, + err = ab3100_get_register_page_interruptible(ab3100, AB3100_EVENTA1, event_regs, 3); if (err) goto err_event_wq; @@ -417,7 +421,7 @@ static irqreturn_t ab3100_irq_handler(int irq, void *data) * stuff and we will re-enable the interrupts once th * worker has finished. */ - disable_irq(ab3100->i2c_client->irq); + disable_irq_nosync(irq); schedule_work(&ab3100->work); return IRQ_HANDLED; } @@ -435,7 +439,7 @@ static int ab3100_registers_print(struct seq_file *s, void *p) seq_printf(s, "AB3100 registers:\n"); for (reg = 0; reg < 0xff; reg++) { - ab3100_get_register(ab3100, reg, &value); + ab3100_get_register_interruptible(ab3100, reg, &value); seq_printf(s, "[0x%x]: 0x%x\n", reg, value); } return 0; @@ -465,14 +469,14 @@ static int ab3100_get_set_reg_open_file(struct inode *inode, struct file *file) return 0; } -static int ab3100_get_set_reg(struct file *file, - const char __user *user_buf, - size_t count, loff_t *ppos) +static ssize_t ab3100_get_set_reg(struct file *file, + const char __user *user_buf, + size_t count, loff_t *ppos) { struct ab3100_get_set_reg_priv *priv = file->private_data; struct ab3100 *ab3100 = priv->ab3100; char buf[32]; - int buf_size; + ssize_t buf_size; int regp; unsigned long user_reg; int err; @@ -515,7 +519,7 @@ static int ab3100_get_set_reg(struct file *file, u8 reg = (u8) user_reg; u8 regvalue; - ab3100_get_register(ab3100, reg, ®value); + ab3100_get_register_interruptible(ab3100, reg, ®value); dev_info(ab3100->dev, "debug read AB3100 reg[0x%02x]: 0x%02x\n", @@ -547,8 +551,8 @@ static int ab3100_get_set_reg(struct file *file, return -EINVAL; value = (u8) user_value; - ab3100_set_register(ab3100, reg, value); - ab3100_get_register(ab3100, reg, ®value); + ab3100_set_register_interruptible(ab3100, reg, value); + ab3100_get_register_interruptible(ab3100, reg, ®value); dev_info(ab3100->dev, "debug write reg[0x%02x] with 0x%02x, " @@ -662,7 +666,7 @@ ab3100_init_settings[] = { .setting = 0x01 }, { .abreg = AB3100_IMRB1, - .setting = 0xFF + .setting = 0xBF }, { .abreg = AB3100_IMRB2, .setting = 0xFF @@ -696,7 +700,7 @@ static int __init ab3100_setup(struct ab3100 *ab3100) int i; for (i = 0; i < ARRAY_SIZE(ab3100_init_settings); i++) { - err = ab3100_set_register(ab3100, + err = ab3100_set_register_interruptible(ab3100, ab3100_init_settings[i].abreg, ab3100_init_settings[i].setting); if (err) @@ -705,14 +709,14 @@ static int __init ab3100_setup(struct ab3100 *ab3100) /* * Special trick to make the AB3100 use the 32kHz clock (RTC) - * bit 3 in test registe 0x02 is a special, undocumented test + * bit 3 in test register 0x02 is a special, undocumented test * register bit that only exist in AB3100 P1E */ if (ab3100->chip_id == 0xc4) { dev_warn(ab3100->dev, "AB3100 P1E variant detected, " "forcing chip to 32KHz\n"); - err = ab3100_set_test_register(ab3100, 0x02, 0x08); + err = ab3100_set_test_register_interruptible(ab3100, 0x02, 0x08); } exit_no_setup: @@ -833,6 +837,8 @@ static int __init ab3100_probe(struct i2c_client *client, const struct i2c_device_id *id) { struct ab3100 *ab3100; + struct ab3100_platform_data *ab3100_plf_data = + client->dev.platform_data; int err; int i; @@ -852,8 +858,8 @@ static int __init ab3100_probe(struct i2c_client *client, i2c_set_clientdata(client, ab3100); /* Read chip ID register */ - err = ab3100_get_register(ab3100, AB3100_CID, - &ab3100->chip_id); + err = ab3100_get_register_interruptible(ab3100, AB3100_CID, + &ab3100->chip_id); if (err) { dev_err(&client->dev, "could not communicate with the AB3100 analog " @@ -916,6 +922,8 @@ static int __init ab3100_probe(struct i2c_client *client, for (i = 0; i < ARRAY_SIZE(ab3100_platform_devs); i++) { ab3100_platform_devs[i]->dev.parent = &client->dev; + ab3100_platform_devs[i]->dev.platform_data = + ab3100_plf_data; platform_set_drvdata(ab3100_platform_devs[i], ab3100); } diff --git a/drivers/mfd/ab3100-otp.c b/drivers/mfd/ab3100-otp.c new file mode 100644 index 00000000000..0499b2031a2 --- /dev/null +++ b/drivers/mfd/ab3100-otp.c @@ -0,0 +1,268 @@ +/* + * drivers/mfd/ab3100_otp.c + * + * Copyright (C) 2007-2009 ST-Ericsson AB + * License terms: GNU General Public License (GPL) version 2 + * Driver to read out OTP from the AB3100 Mixed-signal circuit + * Author: Linus Walleij <linus.walleij@stericsson.com> + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/mfd/ab3100.h> +#include <linux/debugfs.h> + +/* The OTP registers */ +#define AB3100_OTP0 0xb0 +#define AB3100_OTP1 0xb1 +#define AB3100_OTP2 0xb2 +#define AB3100_OTP3 0xb3 +#define AB3100_OTP4 0xb4 +#define AB3100_OTP5 0xb5 +#define AB3100_OTP6 0xb6 +#define AB3100_OTP7 0xb7 +#define AB3100_OTPP 0xbf + +/** + * struct ab3100_otp + * @dev containing device + * @ab3100 a pointer to the parent ab3100 device struct + * @locked whether the OTP is locked, after locking, no more bits + * can be changed but before locking it is still possible + * to change bits from 1->0. + * @freq clocking frequency for the OTP, this frequency is either + * 32768Hz or 1MHz/30 + * @paf product activation flag, indicates whether this is a real + * product (paf true) or a lab board etc (paf false) + * @imeich if this is set it is possible to override the + * IMEI number found in the tac, fac and svn fields with + * (secured) software + * @cid customer ID + * @tac type allocation code of the IMEI + * @fac final assembly code of the IMEI + * @svn software version number of the IMEI + * @debugfs a debugfs file used when dumping to file + */ +struct ab3100_otp { + struct device *dev; + struct ab3100 *ab3100; + bool locked; + u32 freq; + bool paf; + bool imeich; + u16 cid:14; + u32 tac:20; + u8 fac; + u32 svn:20; + struct dentry *debugfs; +}; + +static int __init ab3100_otp_read(struct ab3100_otp *otp) +{ + struct ab3100 *ab = otp->ab3100; + u8 otpval[8]; + u8 otpp; + int err; + + err = ab3100_get_register_interruptible(ab, AB3100_OTPP, &otpp); + if (err) { + dev_err(otp->dev, "unable to read OTPP register\n"); + return err; + } + + err = ab3100_get_register_page_interruptible(ab, AB3100_OTP0, + otpval, 8); + if (err) { + dev_err(otp->dev, "unable to read OTP register page\n"); + return err; + } + + /* Cache OTP properties, they never change by nature */ + otp->locked = (otpp & 0x80); + otp->freq = (otpp & 0x40) ? 32768 : 34100; + otp->paf = (otpval[1] & 0x80); + otp->imeich = (otpval[1] & 0x40); + otp->cid = ((otpval[1] << 8) | otpval[0]) & 0x3fff; + otp->tac = ((otpval[4] & 0x0f) << 16) | (otpval[3] << 8) | otpval[2]; + otp->fac = ((otpval[5] & 0x0f) << 4) | (otpval[4] >> 4); + otp->svn = (otpval[7] << 12) | (otpval[6] << 4) | (otpval[5] >> 4); + return 0; +} + +/* + * This is a simple debugfs human-readable file that dumps out + * the contents of the OTP. + */ +#ifdef CONFIG_DEBUGFS +static int show_otp(struct seq_file *s, void *v) +{ + struct ab3100_otp *otp = s->private; + int err; + + seq_printf(s, "OTP is %s\n", otp->locked ? "LOCKED" : "UNLOCKED"); + seq_printf(s, "OTP clock switch startup is %uHz\n", otp->freq); + seq_printf(s, "PAF is %s\n", otp->paf ? "SET" : "NOT SET"); + seq_printf(s, "IMEI is %s\n", otp->imeich ? + "CHANGEABLE" : "NOT CHANGEABLE"); + seq_printf(s, "CID: 0x%04x (decimal: %d)\n", otp->cid, otp->cid); + seq_printf(s, "IMEI: %u-%u-%u\n", otp->tac, otp->fac, otp->svn); + return 0; +} + +static int ab3100_otp_open(struct inode *inode, struct file *file) +{ + return single_open(file, ab3100_otp_show, inode->i_private); +} + +static const struct file_operations ab3100_otp_operations = { + .open = ab3100_otp_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + +static int __init ab3100_otp_init_debugfs(struct device *dev, + struct ab3100_otp *otp) +{ + otp->debugfs = debugfs_create_file("ab3100_otp", S_IFREG | S_IRUGO, + NULL, otp, + &ab3100_otp_operations); + if (!otp->debugfs) { + dev_err(dev, "AB3100 debugfs OTP file registration failed!\n"); + return err; + } +} + +static void __exit ab3100_otp_exit_debugfs(struct ab3100_otp *otp) +{ + debugfs_remove_file(otp->debugfs); +} +#else +/* Compile this out if debugfs not selected */ +static inline int __init ab3100_otp_init_debugfs(struct device *dev, + struct ab3100_otp *otp) +{ + return 0; +} + +static inline void __exit ab3100_otp_exit_debugfs(struct ab3100_otp *otp) +{ +} +#endif + +#define SHOW_AB3100_ATTR(name) \ +static ssize_t ab3100_otp_##name##_show(struct device *dev, \ + struct device_attribute *attr, \ + char *buf) \ +{\ + struct ab3100_otp *otp = dev_get_drvdata(dev); \ + return sprintf(buf, "%u\n", otp->name); \ +} + +SHOW_AB3100_ATTR(locked) +SHOW_AB3100_ATTR(freq) +SHOW_AB3100_ATTR(paf) +SHOW_AB3100_ATTR(imeich) +SHOW_AB3100_ATTR(cid) +SHOW_AB3100_ATTR(fac) +SHOW_AB3100_ATTR(tac) +SHOW_AB3100_ATTR(svn) + +static struct device_attribute ab3100_otp_attrs[] = { + __ATTR(locked, S_IRUGO, ab3100_otp_locked_show, NULL), + __ATTR(freq, S_IRUGO, ab3100_otp_freq_show, NULL), + __ATTR(paf, S_IRUGO, ab3100_otp_paf_show, NULL), + __ATTR(imeich, S_IRUGO, ab3100_otp_imeich_show, NULL), + __ATTR(cid, S_IRUGO, ab3100_otp_cid_show, NULL), + __ATTR(fac, S_IRUGO, ab3100_otp_fac_show, NULL), + __ATTR(tac, S_IRUGO, ab3100_otp_tac_show, NULL), + __ATTR(svn, S_IRUGO, ab3100_otp_svn_show, NULL), +}; + +static int __init ab3100_otp_probe(struct platform_device *pdev) +{ + struct ab3100_otp *otp; + int err = 0; + int i; + + otp = kzalloc(sizeof(struct ab3100_otp), GFP_KERNEL); + if (!otp) { + dev_err(&pdev->dev, "could not allocate AB3100 OTP device\n"); + return -ENOMEM; + } + otp->dev = &pdev->dev; + + /* Replace platform data coming in with a local struct */ + otp->ab3100 = platform_get_drvdata(pdev); + platform_set_drvdata(pdev, otp); + + err = ab3100_otp_read(otp); + if (err) + return err; + + dev_info(&pdev->dev, "AB3100 OTP readout registered\n"); + + /* sysfs entries */ + for (i = 0; i < ARRAY_SIZE(ab3100_otp_attrs); i++) { + err = device_create_file(&pdev->dev, + &ab3100_otp_attrs[i]); + if (err) + goto out_no_sysfs; + } + + /* debugfs entries */ + err = ab3100_otp_init_debugfs(&pdev->dev, otp); + if (err) + goto out_no_debugfs; + + return 0; + +out_no_sysfs: + for (i = 0; i < ARRAY_SIZE(ab3100_otp_attrs); i++) + device_remove_file(&pdev->dev, + &ab3100_otp_attrs[i]); +out_no_debugfs: + kfree(otp); + return err; +} + +static int __exit ab3100_otp_remove(struct platform_device *pdev) +{ + struct ab3100_otp *otp = platform_get_drvdata(pdev); + int i; + + for (i = 0; i < ARRAY_SIZE(ab3100_otp_attrs); i++) + device_remove_file(&pdev->dev, + &ab3100_otp_attrs[i]); + ab3100_otp_exit_debugfs(otp); + kfree(otp); + return 0; +} + +static struct platform_driver ab3100_otp_driver = { + .driver = { + .name = "ab3100-otp", + .owner = THIS_MODULE, + }, + .remove = __exit_p(ab3100_otp_remove), +}; + +static int __init ab3100_otp_init(void) +{ + return platform_driver_probe(&ab3100_otp_driver, + ab3100_otp_probe); +} + +static void __exit ab3100_otp_exit(void) +{ + platform_driver_unregister(&ab3100_otp_driver); +} + +module_init(ab3100_otp_init); +module_exit(ab3100_otp_exit); + +MODULE_AUTHOR("Linus Walleij <linus.walleij@stericsson.com>"); +MODULE_DESCRIPTION("AB3100 OTP Readout Driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/mfd/dm355evm_msp.c b/drivers/mfd/dm355evm_msp.c index 5b6e58a3ba4..3d4a861976c 100644 --- a/drivers/mfd/dm355evm_msp.c +++ b/drivers/mfd/dm355evm_msp.c @@ -107,8 +107,16 @@ static const u8 msp_gpios[] = { MSP_GPIO(2, SWITCH1), MSP_GPIO(3, SWITCH1), MSP_GPIO(4, SWITCH1), /* switches on MMC/SD sockets */ - MSP_GPIO(1, SDMMC), MSP_GPIO(2, SDMMC), /* mmc0 WP, nCD */ - MSP_GPIO(3, SDMMC), MSP_GPIO(4, SDMMC), /* mmc1 WP, nCD */ + /* + * Note: EVMDM355_ECP_VA4.pdf suggests that Bit 2 and 4 should be + * checked for card detection. However on the EVM bit 1 and 3 gives + * this status, for 0 and 1 instance respectively. The pdf also + * suggests that Bit 1 and 3 should be checked for write protection. + * However on the EVM bit 2 and 4 gives this status,for 0 and 1 + * instance respectively. + */ + MSP_GPIO(2, SDMMC), MSP_GPIO(1, SDMMC), /* mmc0 WP, nCD */ + MSP_GPIO(4, SDMMC), MSP_GPIO(3, SDMMC), /* mmc1 WP, nCD */ }; #define MSP_GPIO_REG(offset) (msp_gpios[(offset)] >> 3) diff --git a/drivers/mfd/ezx-pcap.c b/drivers/mfd/ezx-pcap.c index c1de4afa89a..016be4938e4 100644 --- a/drivers/mfd/ezx-pcap.c +++ b/drivers/mfd/ezx-pcap.c @@ -17,6 +17,7 @@ #include <linux/irq.h> #include <linux/mfd/ezx-pcap.h> #include <linux/spi/spi.h> +#include <linux/gpio.h> #define PCAP_ADC_MAXQ 8 struct pcap_adc_request { @@ -106,11 +107,35 @@ int ezx_pcap_read(struct pcap_chip *pcap, u8 reg_num, u32 *value) } EXPORT_SYMBOL_GPL(ezx_pcap_read); +int ezx_pcap_set_bits(struct pcap_chip *pcap, u8 reg_num, u32 mask, u32 val) +{ + int ret; + u32 tmp = PCAP_REGISTER_READ_OP_BIT | + (reg_num << PCAP_REGISTER_ADDRESS_SHIFT); + + mutex_lock(&pcap->io_mutex); + ret = ezx_pcap_putget(pcap, &tmp); + if (ret) + goto out_unlock; + + tmp &= (PCAP_REGISTER_VALUE_MASK & ~mask); + tmp |= (val & mask) | PCAP_REGISTER_WRITE_OP_BIT | + (reg_num << PCAP_REGISTER_ADDRESS_SHIFT); + + ret = ezx_pcap_putget(pcap, &tmp); +out_unlock: + mutex_unlock(&pcap->io_mutex); + + return ret; +} +EXPORT_SYMBOL_GPL(ezx_pcap_set_bits); + /* IRQ */ -static inline unsigned int irq2pcap(struct pcap_chip *pcap, int irq) +int irq_to_pcap(struct pcap_chip *pcap, int irq) { - return 1 << (irq - pcap->irq_base); + return irq - pcap->irq_base; } +EXPORT_SYMBOL_GPL(irq_to_pcap); int pcap_to_irq(struct pcap_chip *pcap, int irq) { @@ -122,7 +147,7 @@ static void pcap_mask_irq(unsigned int irq) { struct pcap_chip *pcap = get_irq_chip_data(irq); - pcap->msr |= irq2pcap(pcap, irq); + pcap->msr |= 1 << irq_to_pcap(pcap, irq); queue_work(pcap->workqueue, &pcap->msr_work); } @@ -130,7 +155,7 @@ static void pcap_unmask_irq(unsigned int irq) { struct pcap_chip *pcap = get_irq_chip_data(irq); - pcap->msr &= ~irq2pcap(pcap, irq); + pcap->msr &= ~(1 << irq_to_pcap(pcap, irq)); queue_work(pcap->workqueue, &pcap->msr_work); } @@ -154,34 +179,38 @@ static void pcap_isr_work(struct work_struct *work) u32 msr, isr, int_sel, service; int irq; - ezx_pcap_read(pcap, PCAP_REG_MSR, &msr); - ezx_pcap_read(pcap, PCAP_REG_ISR, &isr); + do { + ezx_pcap_read(pcap, PCAP_REG_MSR, &msr); + ezx_pcap_read(pcap, PCAP_REG_ISR, &isr); - /* We cant service/ack irqs that are assigned to port 2 */ - if (!(pdata->config & PCAP_SECOND_PORT)) { - ezx_pcap_read(pcap, PCAP_REG_INT_SEL, &int_sel); - isr &= ~int_sel; - } - ezx_pcap_write(pcap, PCAP_REG_ISR, isr); + /* We cant service/ack irqs that are assigned to port 2 */ + if (!(pdata->config & PCAP_SECOND_PORT)) { + ezx_pcap_read(pcap, PCAP_REG_INT_SEL, &int_sel); + isr &= ~int_sel; + } - local_irq_disable(); - service = isr & ~msr; + ezx_pcap_write(pcap, PCAP_REG_MSR, isr | msr); + ezx_pcap_write(pcap, PCAP_REG_ISR, isr); - for (irq = pcap->irq_base; service; service >>= 1, irq++) { - if (service & 1) { - struct irq_desc *desc = irq_to_desc(irq); + local_irq_disable(); + service = isr & ~msr; + for (irq = pcap->irq_base; service; service >>= 1, irq++) { + if (service & 1) { + struct irq_desc *desc = irq_to_desc(irq); - if (WARN(!desc, KERN_WARNING - "Invalid PCAP IRQ %d\n", irq)) - break; + if (WARN(!desc, KERN_WARNING + "Invalid PCAP IRQ %d\n", irq)) + break; - if (desc->status & IRQ_DISABLED) - note_interrupt(irq, desc, IRQ_NONE); - else - desc->handle_irq(irq, desc); + if (desc->status & IRQ_DISABLED) + note_interrupt(irq, desc, IRQ_NONE); + else + desc->handle_irq(irq, desc); + } } - } - local_irq_enable(); + local_irq_enable(); + ezx_pcap_write(pcap, PCAP_REG_MSR, pcap->msr); + } while (gpio_get_value(irq_to_gpio(pcap->spi->irq))); } static void pcap_irq_handler(unsigned int irq, struct irq_desc *desc) @@ -194,6 +223,19 @@ static void pcap_irq_handler(unsigned int irq, struct irq_desc *desc) } /* ADC */ +void pcap_set_ts_bits(struct pcap_chip *pcap, u32 bits) +{ + u32 tmp; + + mutex_lock(&pcap->adc_mutex); + ezx_pcap_read(pcap, PCAP_REG_ADC, &tmp); + tmp &= ~(PCAP_ADC_TS_M_MASK | PCAP_ADC_TS_REF_LOWPWR); + tmp |= bits & (PCAP_ADC_TS_M_MASK | PCAP_ADC_TS_REF_LOWPWR); + ezx_pcap_write(pcap, PCAP_REG_ADC, tmp); + mutex_unlock(&pcap->adc_mutex); +} +EXPORT_SYMBOL_GPL(pcap_set_ts_bits); + static void pcap_disable_adc(struct pcap_chip *pcap) { u32 tmp; @@ -216,15 +258,16 @@ static void pcap_adc_trigger(struct pcap_chip *pcap) mutex_unlock(&pcap->adc_mutex); return; } - mutex_unlock(&pcap->adc_mutex); - - /* start conversion on requested bank */ - tmp = pcap->adc_queue[head]->flags | PCAP_ADC_ADEN; + /* start conversion on requested bank, save TS_M bits */ + ezx_pcap_read(pcap, PCAP_REG_ADC, &tmp); + tmp &= (PCAP_ADC_TS_M_MASK | PCAP_ADC_TS_REF_LOWPWR); + tmp |= pcap->adc_queue[head]->flags | PCAP_ADC_ADEN; if (pcap->adc_queue[head]->bank == PCAP_ADC_BANK_1) tmp |= PCAP_ADC_AD_SEL1; ezx_pcap_write(pcap, PCAP_REG_ADC, tmp); + mutex_unlock(&pcap->adc_mutex); ezx_pcap_write(pcap, PCAP_REG_ADR, PCAP_ADR_ASC); } @@ -499,7 +542,7 @@ static void __exit ezx_pcap_exit(void) spi_unregister_driver(&ezxpcap_driver); } -module_init(ezx_pcap_init); +subsys_initcall(ezx_pcap_init); module_exit(ezx_pcap_exit); MODULE_LICENSE("GPL"); diff --git a/drivers/mfd/mc13783-core.c b/drivers/mfd/mc13783-core.c new file mode 100644 index 00000000000..e354d2912ef --- /dev/null +++ b/drivers/mfd/mc13783-core.c @@ -0,0 +1,427 @@ +/* + * Copyright 2009 Pengutronix, Sascha Hauer <s.hauer@pengutronix.de> + * + * This code is in parts based on wm8350-core.c and pcf50633-core.c + * + * Initial development of this code was funded by + * Phytec Messtechnik GmbH, http://www.phytec.de + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/mfd/mc13783-private.h> +#include <linux/platform_device.h> +#include <linux/mfd/mc13783.h> +#include <linux/completion.h> +#include <linux/interrupt.h> +#include <linux/mfd/core.h> +#include <linux/spi/spi.h> +#include <linux/uaccess.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/slab.h> +#include <linux/irq.h> + +#define MC13783_MAX_REG_NUM 0x3f +#define MC13783_FRAME_MASK 0x00ffffff +#define MC13783_MAX_REG_NUM 0x3f +#define MC13783_REG_NUM_SHIFT 0x19 +#define MC13783_WRITE_BIT_SHIFT 31 + +static inline int spi_rw(struct spi_device *spi, u8 * buf, size_t len) +{ + struct spi_transfer t = { + .tx_buf = (const void *)buf, + .rx_buf = buf, + .len = len, + .cs_change = 0, + .delay_usecs = 0, + }; + struct spi_message m; + + spi_message_init(&m); + spi_message_add_tail(&t, &m); + if (spi_sync(spi, &m) != 0 || m.status != 0) + return -EINVAL; + return len - m.actual_length; +} + +static int mc13783_read(struct mc13783 *mc13783, int reg_num, u32 *reg_val) +{ + unsigned int frame = 0; + int ret = 0; + + if (reg_num > MC13783_MAX_REG_NUM) + return -EINVAL; + + frame |= reg_num << MC13783_REG_NUM_SHIFT; + + ret = spi_rw(mc13783->spi_device, (u8 *)&frame, 4); + + *reg_val = frame & MC13783_FRAME_MASK; + + return ret; +} + +static int mc13783_write(struct mc13783 *mc13783, int reg_num, u32 reg_val) +{ + unsigned int frame = 0; + + if (reg_num > MC13783_MAX_REG_NUM) + return -EINVAL; + + frame |= (1 << MC13783_WRITE_BIT_SHIFT); + frame |= reg_num << MC13783_REG_NUM_SHIFT; + frame |= reg_val & MC13783_FRAME_MASK; + + return spi_rw(mc13783->spi_device, (u8 *)&frame, 4); +} + +int mc13783_reg_read(struct mc13783 *mc13783, int reg_num, u32 *reg_val) +{ + int ret; + + mutex_lock(&mc13783->io_lock); + ret = mc13783_read(mc13783, reg_num, reg_val); + mutex_unlock(&mc13783->io_lock); + + return ret; +} +EXPORT_SYMBOL_GPL(mc13783_reg_read); + +int mc13783_reg_write(struct mc13783 *mc13783, int reg_num, u32 reg_val) +{ + int ret; + + mutex_lock(&mc13783->io_lock); + ret = mc13783_write(mc13783, reg_num, reg_val); + mutex_unlock(&mc13783->io_lock); + + return ret; +} +EXPORT_SYMBOL_GPL(mc13783_reg_write); + +/** + * mc13783_set_bits - Bitmask write + * + * @mc13783: Pointer to mc13783 control structure + * @reg: Register to access + * @mask: Mask of bits to change + * @val: Value to set for masked bits + */ +int mc13783_set_bits(struct mc13783 *mc13783, int reg, u32 mask, u32 val) +{ + u32 tmp; + int ret; + + mutex_lock(&mc13783->io_lock); + + ret = mc13783_read(mc13783, reg, &tmp); + tmp = (tmp & ~mask) | val; + if (ret == 0) + ret = mc13783_write(mc13783, reg, tmp); + + mutex_unlock(&mc13783->io_lock); + + return ret; +} +EXPORT_SYMBOL_GPL(mc13783_set_bits); + +int mc13783_register_irq(struct mc13783 *mc13783, int irq, + void (*handler) (int, void *), void *data) +{ + if (irq < 0 || irq > MC13783_NUM_IRQ || !handler) + return -EINVAL; + + if (WARN_ON(mc13783->irq_handler[irq].handler)) + return -EBUSY; + + mutex_lock(&mc13783->io_lock); + mc13783->irq_handler[irq].handler = handler; + mc13783->irq_handler[irq].data = data; + mutex_unlock(&mc13783->io_lock); + + return 0; +} +EXPORT_SYMBOL_GPL(mc13783_register_irq); + +int mc13783_free_irq(struct mc13783 *mc13783, int irq) +{ + if (irq < 0 || irq > MC13783_NUM_IRQ) + return -EINVAL; + + mutex_lock(&mc13783->io_lock); + mc13783->irq_handler[irq].handler = NULL; + mutex_unlock(&mc13783->io_lock); + + return 0; +} +EXPORT_SYMBOL_GPL(mc13783_free_irq); + +static void mc13783_irq_work(struct work_struct *work) +{ + struct mc13783 *mc13783 = container_of(work, struct mc13783, work); + int i; + unsigned int adc_sts; + + /* check if the adc has finished any completion */ + mc13783_reg_read(mc13783, MC13783_REG_INTERRUPT_STATUS_0, &adc_sts); + mc13783_reg_write(mc13783, MC13783_REG_INTERRUPT_STATUS_0, + adc_sts & MC13783_INT_STAT_ADCDONEI); + + if (adc_sts & MC13783_INT_STAT_ADCDONEI) + complete_all(&mc13783->adc_done); + + for (i = 0; i < MC13783_NUM_IRQ; i++) + if (mc13783->irq_handler[i].handler) + mc13783->irq_handler[i].handler(i, + mc13783->irq_handler[i].data); + enable_irq(mc13783->irq); +} + +static irqreturn_t mc13783_interrupt(int irq, void *dev_id) +{ + struct mc13783 *mc13783 = dev_id; + + disable_irq_nosync(irq); + + schedule_work(&mc13783->work); + return IRQ_HANDLED; +} + +/* set adc to ts interrupt mode, which generates touchscreen wakeup interrupt */ +static inline void mc13783_adc_set_ts_irq_mode(struct mc13783 *mc13783) +{ + unsigned int reg_adc0, reg_adc1; + + reg_adc0 = MC13783_ADC0_ADREFEN | MC13783_ADC0_ADREFMODE + | MC13783_ADC0_TSMOD0; + reg_adc1 = MC13783_ADC1_ADEN | MC13783_ADC1_ADTRIGIGN; + + mc13783_reg_write(mc13783, MC13783_REG_ADC_0, reg_adc0); + mc13783_reg_write(mc13783, MC13783_REG_ADC_1, reg_adc1); +} + +int mc13783_adc_do_conversion(struct mc13783 *mc13783, unsigned int mode, + unsigned int channel, unsigned int *sample) +{ + unsigned int reg_adc0, reg_adc1; + int i; + + mutex_lock(&mc13783->adc_conv_lock); + + /* set up auto incrementing anyway to make quick read */ + reg_adc0 = MC13783_ADC0_ADINC1 | MC13783_ADC0_ADINC2; + /* enable the adc, ignore external triggering and set ASC to trigger + * conversion */ + reg_adc1 = MC13783_ADC1_ADEN | MC13783_ADC1_ADTRIGIGN + | MC13783_ADC1_ASC; + + /* setup channel number */ + if (channel > 7) + reg_adc1 |= MC13783_ADC1_ADSEL; + + switch (mode) { + case MC13783_ADC_MODE_TS: + /* enables touch screen reference mode and set touchscreen mode + * to position mode */ + reg_adc0 |= MC13783_ADC0_ADREFEN | MC13783_ADC0_ADREFMODE + | MC13783_ADC0_TSMOD0 | MC13783_ADC0_TSMOD1; + reg_adc1 |= 4 << MC13783_ADC1_CHAN1_SHIFT; + break; + case MC13783_ADC_MODE_SINGLE_CHAN: + reg_adc1 |= (channel & 0x7) << MC13783_ADC1_CHAN0_SHIFT; + reg_adc1 |= MC13783_ADC1_RAND; + break; + case MC13783_ADC_MODE_MULT_CHAN: + reg_adc1 |= 4 << MC13783_ADC1_CHAN1_SHIFT; + break; + default: + return -EINVAL; + } + + mc13783_reg_write(mc13783, MC13783_REG_ADC_0, reg_adc0); + mc13783_reg_write(mc13783, MC13783_REG_ADC_1, reg_adc1); + + wait_for_completion_interruptible(&mc13783->adc_done); + + for (i = 0; i < 4; i++) + mc13783_reg_read(mc13783, MC13783_REG_ADC_2, &sample[i]); + + if (mc13783->ts_active) + mc13783_adc_set_ts_irq_mode(mc13783); + + mutex_unlock(&mc13783->adc_conv_lock); + + return 0; +} +EXPORT_SYMBOL_GPL(mc13783_adc_do_conversion); + +void mc13783_adc_set_ts_status(struct mc13783 *mc13783, unsigned int status) +{ + mc13783->ts_active = status; +} +EXPORT_SYMBOL_GPL(mc13783_adc_set_ts_status); + +static int mc13783_check_revision(struct mc13783 *mc13783) +{ + u32 rev_id, rev1, rev2, finid, icid; + + mc13783_read(mc13783, MC13783_REG_REVISION, &rev_id); + + rev1 = (rev_id & 0x018) >> 3; + rev2 = (rev_id & 0x007); + icid = (rev_id & 0x01C0) >> 6; + finid = (rev_id & 0x01E00) >> 9; + + /* Ver 0.2 is actually 3.2a. Report as 3.2 */ + if ((rev1 == 0) && (rev2 == 2)) + rev1 = 3; + + if (rev1 == 0 || icid != 2) { + dev_err(mc13783->dev, "No MC13783 detected.\n"); + return -ENODEV; + } + + mc13783->revision = ((rev1 * 10) + rev2); + dev_info(mc13783->dev, "MC13783 Rev %d.%d FinVer %x detected\n", rev1, + rev2, finid); + + return 0; +} + +/* + * Register a client device. This is non-fatal since there is no need to + * fail the entire device init due to a single platform device failing. + */ +static void mc13783_client_dev_register(struct mc13783 *mc13783, + const char *name) +{ + struct mfd_cell cell = {}; + + cell.name = name; + + mfd_add_devices(mc13783->dev, -1, &cell, 1, NULL, 0); +} + +static int __devinit mc13783_probe(struct spi_device *spi) +{ + struct mc13783 *mc13783; + struct mc13783_platform_data *pdata = spi->dev.platform_data; + int ret; + + mc13783 = kzalloc(sizeof(struct mc13783), GFP_KERNEL); + if (!mc13783) + return -ENOMEM; + + dev_set_drvdata(&spi->dev, mc13783); + spi->mode = SPI_MODE_0 | SPI_CS_HIGH; + spi->bits_per_word = 32; + spi_setup(spi); + + mc13783->spi_device = spi; + mc13783->dev = &spi->dev; + mc13783->irq = spi->irq; + + INIT_WORK(&mc13783->work, mc13783_irq_work); + mutex_init(&mc13783->io_lock); + mutex_init(&mc13783->adc_conv_lock); + init_completion(&mc13783->adc_done); + + if (pdata) { + mc13783->flags = pdata->flags; + mc13783->regulators = pdata->regulators; + mc13783->num_regulators = pdata->num_regulators; + } + + if (mc13783_check_revision(mc13783)) { + ret = -ENODEV; + goto err_out; + } + + /* clear and mask all interrupts */ + mc13783_reg_write(mc13783, MC13783_REG_INTERRUPT_STATUS_0, 0x00ffffff); + mc13783_reg_write(mc13783, MC13783_REG_INTERRUPT_MASK_0, 0x00ffffff); + mc13783_reg_write(mc13783, MC13783_REG_INTERRUPT_STATUS_1, 0x00ffffff); + mc13783_reg_write(mc13783, MC13783_REG_INTERRUPT_MASK_1, 0x00ffffff); + + /* unmask adcdone interrupts */ + mc13783_set_bits(mc13783, MC13783_REG_INTERRUPT_MASK_0, + MC13783_INT_MASK_ADCDONEM, 0); + + ret = request_irq(mc13783->irq, mc13783_interrupt, + IRQF_DISABLED | IRQF_TRIGGER_HIGH, "mc13783", + mc13783); + if (ret) + goto err_out; + + if (mc13783->flags & MC13783_USE_CODEC) + mc13783_client_dev_register(mc13783, "mc13783-codec"); + if (mc13783->flags & MC13783_USE_ADC) + mc13783_client_dev_register(mc13783, "mc13783-adc"); + if (mc13783->flags & MC13783_USE_RTC) + mc13783_client_dev_register(mc13783, "mc13783-rtc"); + if (mc13783->flags & MC13783_USE_REGULATOR) + mc13783_client_dev_register(mc13783, "mc13783-regulator"); + if (mc13783->flags & MC13783_USE_TOUCHSCREEN) + mc13783_client_dev_register(mc13783, "mc13783-ts"); + + return 0; + +err_out: + kfree(mc13783); + return ret; +} + +static int __devexit mc13783_remove(struct spi_device *spi) +{ + struct mc13783 *mc13783; + + mc13783 = dev_get_drvdata(&spi->dev); + + free_irq(mc13783->irq, mc13783); + + mfd_remove_devices(&spi->dev); + + return 0; +} + +static struct spi_driver pmic_driver = { + .driver = { + .name = "mc13783", + .bus = &spi_bus_type, + .owner = THIS_MODULE, + }, + .probe = mc13783_probe, + .remove = __devexit_p(mc13783_remove), +}; + +static int __init pmic_init(void) +{ + return spi_register_driver(&pmic_driver); +} +subsys_initcall(pmic_init); + +static void __exit pmic_exit(void) +{ + spi_unregister_driver(&pmic_driver); +} +module_exit(pmic_exit); + +MODULE_DESCRIPTION("Core/Protocol driver for Freescale MC13783 PMIC"); +MODULE_AUTHOR("Sascha Hauer <s.hauer@pengutronix.de>"); +MODULE_LICENSE("GPL"); + diff --git a/drivers/mfd/mfd-core.c b/drivers/mfd/mfd-core.c index 54ddf3772e0..ae15e495e20 100644 --- a/drivers/mfd/mfd-core.c +++ b/drivers/mfd/mfd-core.c @@ -25,7 +25,7 @@ static int mfd_add_device(struct device *parent, int id, int ret = -ENOMEM; int r; - pdev = platform_device_alloc(cell->name, id); + pdev = platform_device_alloc(cell->name, id + cell->id); if (!pdev) goto fail_alloc; diff --git a/drivers/mfd/pcf50633-adc.c b/drivers/mfd/pcf50633-adc.c index c2d05becfa9..3d31e97d6a4 100644 --- a/drivers/mfd/pcf50633-adc.c +++ b/drivers/mfd/pcf50633-adc.c @@ -73,15 +73,10 @@ static void trigger_next_adc_job_if_any(struct pcf50633 *pcf) struct pcf50633_adc *adc = __to_adc(pcf); int head; - mutex_lock(&adc->queue_mutex); - head = adc->queue_head; - if (!adc->queue[head]) { - mutex_unlock(&adc->queue_mutex); + if (!adc->queue[head]) return; - } - mutex_unlock(&adc->queue_mutex); adc_setup(pcf, adc->queue[head]->mux, adc->queue[head]->avg); } @@ -99,16 +94,17 @@ adc_enqueue_request(struct pcf50633 *pcf, struct pcf50633_adc_request *req) if (adc->queue[tail]) { mutex_unlock(&adc->queue_mutex); + dev_err(pcf->dev, "ADC queue is full, dropping request\n"); return -EBUSY; } adc->queue[tail] = req; + if (head == tail) + trigger_next_adc_job_if_any(pcf); adc->queue_tail = (tail + 1) & (PCF50633_MAX_ADC_FIFO_DEPTH - 1); mutex_unlock(&adc->queue_mutex); - trigger_next_adc_job_if_any(pcf); - return 0; } @@ -124,6 +120,7 @@ pcf50633_adc_sync_read_callback(struct pcf50633 *pcf, void *param, int result) int pcf50633_adc_sync_read(struct pcf50633 *pcf, int mux, int avg) { struct pcf50633_adc_request *req; + int err; /* req is freed when the result is ready, in interrupt handler */ req = kzalloc(sizeof(*req), GFP_KERNEL); @@ -136,9 +133,13 @@ int pcf50633_adc_sync_read(struct pcf50633 *pcf, int mux, int avg) req->callback_param = req; init_completion(&req->completion); - adc_enqueue_request(pcf, req); + err = adc_enqueue_request(pcf, req); + if (err) + return err; + wait_for_completion(&req->completion); + /* FIXME by this time req might be already freed */ return req->result; } EXPORT_SYMBOL_GPL(pcf50633_adc_sync_read); @@ -159,9 +160,7 @@ int pcf50633_adc_async_read(struct pcf50633 *pcf, int mux, int avg, req->callback = callback; req->callback_param = callback_param; - adc_enqueue_request(pcf, req); - - return 0; + return adc_enqueue_request(pcf, req); } EXPORT_SYMBOL_GPL(pcf50633_adc_async_read); @@ -184,7 +183,7 @@ static void pcf50633_adc_irq(int irq, void *data) struct pcf50633_adc *adc = data; struct pcf50633 *pcf = adc->pcf; struct pcf50633_adc_request *req; - int head; + int head, res; mutex_lock(&adc->queue_mutex); head = adc->queue_head; @@ -199,12 +198,13 @@ static void pcf50633_adc_irq(int irq, void *data) adc->queue_head = (head + 1) & (PCF50633_MAX_ADC_FIFO_DEPTH - 1); + res = adc_result(pcf); + trigger_next_adc_job_if_any(pcf); + mutex_unlock(&adc->queue_mutex); - req->callback(pcf, req->callback_param, adc_result(pcf)); + req->callback(pcf, req->callback_param, res); kfree(req); - - trigger_next_adc_job_if_any(pcf); } static int __devinit pcf50633_adc_probe(struct platform_device *pdev) diff --git a/drivers/mfd/pcf50633-core.c b/drivers/mfd/pcf50633-core.c index 8d3c38bf971..d26d7747175 100644 --- a/drivers/mfd/pcf50633-core.c +++ b/drivers/mfd/pcf50633-core.c @@ -444,7 +444,7 @@ static irqreturn_t pcf50633_irq(int irq, void *data) get_device(pcf->dev); disable_irq_nosync(pcf->irq); - schedule_work(&pcf->irq_work); + queue_work(pcf->work_queue, &pcf->irq_work); return IRQ_HANDLED; } @@ -575,6 +575,7 @@ static int __devinit pcf50633_probe(struct i2c_client *client, pcf->dev = &client->dev; pcf->i2c_client = client; pcf->irq = client->irq; + pcf->work_queue = create_singlethread_workqueue("pcf50633"); INIT_WORK(&pcf->irq_work, pcf50633_irq_worker); @@ -651,6 +652,7 @@ static int __devinit pcf50633_probe(struct i2c_client *client, return 0; err: + destroy_workqueue(pcf->work_queue); kfree(pcf); return ret; } @@ -661,6 +663,7 @@ static int __devexit pcf50633_remove(struct i2c_client *client) int i; free_irq(pcf->irq, pcf); + destroy_workqueue(pcf->work_queue); platform_device_unregister(pcf->input_pdev); platform_device_unregister(pcf->rtc_pdev); diff --git a/drivers/mfd/twl4030-core.c b/drivers/mfd/twl4030-core.c index ca54996ffd0..e424cf6d8e9 100644 --- a/drivers/mfd/twl4030-core.c +++ b/drivers/mfd/twl4030-core.c @@ -89,6 +89,12 @@ #define twl_has_madc() false #endif +#ifdef CONFIG_TWL4030_POWER +#define twl_has_power() true +#else +#define twl_has_power() false +#endif + #if defined(CONFIG_RTC_DRV_TWL4030) || defined(CONFIG_RTC_DRV_TWL4030_MODULE) #define twl_has_rtc() true #else @@ -115,6 +121,12 @@ #define TWL4030_NUM_SLAVES 4 +#if defined(CONFIG_INPUT_TWL4030_PWRBUTTON) \ + || defined(CONFIG_INPUT_TWL4030_PWBUTTON_MODULE) +#define twl_has_pwrbutton() true +#else +#define twl_has_pwrbutton() false +#endif /* Base Address defns for twl4030_map[] */ @@ -538,6 +550,13 @@ add_children(struct twl4030_platform_data *pdata, unsigned long features) return PTR_ERR(child); } + if (twl_has_pwrbutton()) { + child = add_child(1, "twl4030_pwrbutton", + NULL, 0, true, pdata->irq_base + 8 + 0, 0); + if (IS_ERR(child)) + return PTR_ERR(child); + } + if (twl_has_regulator()) { /* child = add_regulator(TWL4030_REG_VPLL1, pdata->vpll1); @@ -788,6 +807,10 @@ twl4030_probe(struct i2c_client *client, const struct i2c_device_id *id) /* setup clock framework */ clocks_init(&client->dev); + /* load power event scripts */ + if (twl_has_power() && pdata->power) + twl4030_power_init(pdata->power); + /* Maybe init the T2 Interrupt subsystem */ if (client->irq && pdata->irq_base diff --git a/drivers/mfd/twl4030-irq.c b/drivers/mfd/twl4030-irq.c index 7d430835655..fb194fe244c 100644 --- a/drivers/mfd/twl4030-irq.c +++ b/drivers/mfd/twl4030-irq.c @@ -424,7 +424,7 @@ static void twl4030_sih_do_edge(struct work_struct *work) /* see what work we have */ spin_lock_irq(&sih_agent_lock); edge_change = agent->edge_change; - agent->edge_change = 0;; + agent->edge_change = 0; sih = edge_change ? agent->sih : NULL; spin_unlock_irq(&sih_agent_lock); if (!sih) diff --git a/drivers/mfd/twl4030-power.c b/drivers/mfd/twl4030-power.c new file mode 100644 index 00000000000..d423e0c4176 --- /dev/null +++ b/drivers/mfd/twl4030-power.c @@ -0,0 +1,472 @@ +/* + * linux/drivers/i2c/chips/twl4030-power.c + * + * Handle TWL4030 Power initialization + * + * Copyright (C) 2008 Nokia Corporation + * Copyright (C) 2006 Texas Instruments, Inc + * + * Written by Kalle Jokiniemi + * Peter De Schrijver <peter.de-schrijver@nokia.com> + * Several fixes by Amit Kucheria <amit.kucheria@verdurent.com> + * + * This file is subject to the terms and conditions of the GNU General + * Public License. See the file "COPYING" in the main directory of this + * archive for more details. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/module.h> +#include <linux/pm.h> +#include <linux/i2c/twl4030.h> +#include <linux/platform_device.h> + +#include <asm/mach-types.h> + +static u8 twl4030_start_script_address = 0x2b; + +#define PWR_P1_SW_EVENTS 0x10 +#define PWR_DEVOFF (1<<0) + +#define PHY_TO_OFF_PM_MASTER(p) (p - 0x36) +#define PHY_TO_OFF_PM_RECEIVER(p) (p - 0x5b) + +/* resource - hfclk */ +#define R_HFCLKOUT_DEV_GRP PHY_TO_OFF_PM_RECEIVER(0xe6) + +/* PM events */ +#define R_P1_SW_EVENTS PHY_TO_OFF_PM_MASTER(0x46) +#define R_P2_SW_EVENTS PHY_TO_OFF_PM_MASTER(0x47) +#define R_P3_SW_EVENTS PHY_TO_OFF_PM_MASTER(0x48) +#define R_CFG_P1_TRANSITION PHY_TO_OFF_PM_MASTER(0x36) +#define R_CFG_P2_TRANSITION PHY_TO_OFF_PM_MASTER(0x37) +#define R_CFG_P3_TRANSITION PHY_TO_OFF_PM_MASTER(0x38) + +#define LVL_WAKEUP 0x08 + +#define ENABLE_WARMRESET (1<<4) + +#define END_OF_SCRIPT 0x3f + +#define R_SEQ_ADD_A2S PHY_TO_OFF_PM_MASTER(0x55) +#define R_SEQ_ADD_S2A12 PHY_TO_OFF_PM_MASTER(0x56) +#define R_SEQ_ADD_S2A3 PHY_TO_OFF_PM_MASTER(0x57) +#define R_SEQ_ADD_WARM PHY_TO_OFF_PM_MASTER(0x58) +#define R_MEMORY_ADDRESS PHY_TO_OFF_PM_MASTER(0x59) +#define R_MEMORY_DATA PHY_TO_OFF_PM_MASTER(0x5a) + +#define R_PROTECT_KEY 0x0E +#define R_KEY_1 0xC0 +#define R_KEY_2 0x0C + +/* resource configuration registers */ + +#define DEVGROUP_OFFSET 0 +#define TYPE_OFFSET 1 + +/* Bit positions */ +#define DEVGROUP_SHIFT 5 +#define DEVGROUP_MASK (7 << DEVGROUP_SHIFT) +#define TYPE_SHIFT 0 +#define TYPE_MASK (7 << TYPE_SHIFT) +#define TYPE2_SHIFT 3 +#define TYPE2_MASK (3 << TYPE2_SHIFT) + +static u8 res_config_addrs[] = { + [RES_VAUX1] = 0x17, + [RES_VAUX2] = 0x1b, + [RES_VAUX3] = 0x1f, + [RES_VAUX4] = 0x23, + [RES_VMMC1] = 0x27, + [RES_VMMC2] = 0x2b, + [RES_VPLL1] = 0x2f, + [RES_VPLL2] = 0x33, + [RES_VSIM] = 0x37, + [RES_VDAC] = 0x3b, + [RES_VINTANA1] = 0x3f, + [RES_VINTANA2] = 0x43, + [RES_VINTDIG] = 0x47, + [RES_VIO] = 0x4b, + [RES_VDD1] = 0x55, + [RES_VDD2] = 0x63, + [RES_VUSB_1V5] = 0x71, + [RES_VUSB_1V8] = 0x74, + [RES_VUSB_3V1] = 0x77, + [RES_VUSBCP] = 0x7a, + [RES_REGEN] = 0x7f, + [RES_NRES_PWRON] = 0x82, + [RES_CLKEN] = 0x85, + [RES_SYSEN] = 0x88, + [RES_HFCLKOUT] = 0x8b, + [RES_32KCLKOUT] = 0x8e, + [RES_RESET] = 0x91, + [RES_Main_Ref] = 0x94, +}; + +static int __init twl4030_write_script_byte(u8 address, u8 byte) +{ + int err; + + err = twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, address, + R_MEMORY_ADDRESS); + if (err) + goto out; + err = twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, byte, + R_MEMORY_DATA); +out: + return err; +} + +static int __init twl4030_write_script_ins(u8 address, u16 pmb_message, + u8 delay, u8 next) +{ + int err; + + address *= 4; + err = twl4030_write_script_byte(address++, pmb_message >> 8); + if (err) + goto out; + err = twl4030_write_script_byte(address++, pmb_message & 0xff); + if (err) + goto out; + err = twl4030_write_script_byte(address++, delay); + if (err) + goto out; + err = twl4030_write_script_byte(address++, next); +out: + return err; +} + +static int __init twl4030_write_script(u8 address, struct twl4030_ins *script, + int len) +{ + int err; + + for (; len; len--, address++, script++) { + if (len == 1) { + err = twl4030_write_script_ins(address, + script->pmb_message, + script->delay, + END_OF_SCRIPT); + if (err) + break; + } else { + err = twl4030_write_script_ins(address, + script->pmb_message, + script->delay, + address + 1); + if (err) + break; + } + } + return err; +} + +static int __init twl4030_config_wakeup3_sequence(u8 address) +{ + int err; + u8 data; + + /* Set SLEEP to ACTIVE SEQ address for P3 */ + err = twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, address, + R_SEQ_ADD_S2A3); + if (err) + goto out; + + /* P3 LVL_WAKEUP should be on LEVEL */ + err = twl4030_i2c_read_u8(TWL4030_MODULE_PM_MASTER, &data, + R_P3_SW_EVENTS); + if (err) + goto out; + data |= LVL_WAKEUP; + err = twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, data, + R_P3_SW_EVENTS); +out: + if (err) + pr_err("TWL4030 wakeup sequence for P3 config error\n"); + return err; +} + +static int __init twl4030_config_wakeup12_sequence(u8 address) +{ + int err = 0; + u8 data; + + /* Set SLEEP to ACTIVE SEQ address for P1 and P2 */ + err = twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, address, + R_SEQ_ADD_S2A12); + if (err) + goto out; + + /* P1/P2 LVL_WAKEUP should be on LEVEL */ + err = twl4030_i2c_read_u8(TWL4030_MODULE_PM_MASTER, &data, + R_P1_SW_EVENTS); + if (err) + goto out; + + data |= LVL_WAKEUP; + err = twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, data, + R_P1_SW_EVENTS); + if (err) + goto out; + + err = twl4030_i2c_read_u8(TWL4030_MODULE_PM_MASTER, &data, + R_P2_SW_EVENTS); + if (err) + goto out; + + data |= LVL_WAKEUP; + err = twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, data, + R_P2_SW_EVENTS); + if (err) + goto out; + + if (machine_is_omap_3430sdp() || machine_is_omap_ldp()) { + /* Disabling AC charger effect on sleep-active transitions */ + err = twl4030_i2c_read_u8(TWL4030_MODULE_PM_MASTER, &data, + R_CFG_P1_TRANSITION); + if (err) + goto out; + data &= ~(1<<1); + err = twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, data , + R_CFG_P1_TRANSITION); + if (err) + goto out; + } + +out: + if (err) + pr_err("TWL4030 wakeup sequence for P1 and P2" \ + "config error\n"); + return err; +} + +static int __init twl4030_config_sleep_sequence(u8 address) +{ + int err; + + /* Set ACTIVE to SLEEP SEQ address in T2 memory*/ + err = twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, address, + R_SEQ_ADD_A2S); + + if (err) + pr_err("TWL4030 sleep sequence config error\n"); + + return err; +} + +static int __init twl4030_config_warmreset_sequence(u8 address) +{ + int err; + u8 rd_data; + + /* Set WARM RESET SEQ address for P1 */ + err = twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, address, + R_SEQ_ADD_WARM); + if (err) + goto out; + + /* P1/P2/P3 enable WARMRESET */ + err = twl4030_i2c_read_u8(TWL4030_MODULE_PM_MASTER, &rd_data, + R_P1_SW_EVENTS); + if (err) + goto out; + + rd_data |= ENABLE_WARMRESET; + err = twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, rd_data, + R_P1_SW_EVENTS); + if (err) + goto out; + + err = twl4030_i2c_read_u8(TWL4030_MODULE_PM_MASTER, &rd_data, + R_P2_SW_EVENTS); + if (err) + goto out; + + rd_data |= ENABLE_WARMRESET; + err = twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, rd_data, + R_P2_SW_EVENTS); + if (err) + goto out; + + err = twl4030_i2c_read_u8(TWL4030_MODULE_PM_MASTER, &rd_data, + R_P3_SW_EVENTS); + if (err) + goto out; + + rd_data |= ENABLE_WARMRESET; + err = twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, rd_data, + R_P3_SW_EVENTS); +out: + if (err) + pr_err("TWL4030 warmreset seq config error\n"); + return err; +} + +static int __init twl4030_configure_resource(struct twl4030_resconfig *rconfig) +{ + int rconfig_addr; + int err; + u8 type; + u8 grp; + + if (rconfig->resource > TOTAL_RESOURCES) { + pr_err("TWL4030 Resource %d does not exist\n", + rconfig->resource); + return -EINVAL; + } + + rconfig_addr = res_config_addrs[rconfig->resource]; + + /* Set resource group */ + err = twl4030_i2c_read_u8(TWL4030_MODULE_PM_RECEIVER, &grp, + rconfig_addr + DEVGROUP_OFFSET); + if (err) { + pr_err("TWL4030 Resource %d group could not be read\n", + rconfig->resource); + return err; + } + + if (rconfig->devgroup >= 0) { + grp &= ~DEVGROUP_MASK; + grp |= rconfig->devgroup << DEVGROUP_SHIFT; + err = twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, + grp, rconfig_addr + DEVGROUP_OFFSET); + if (err < 0) { + pr_err("TWL4030 failed to program devgroup\n"); + return err; + } + } + + /* Set resource types */ + err = twl4030_i2c_read_u8(TWL4030_MODULE_PM_RECEIVER, &type, + rconfig_addr + TYPE_OFFSET); + if (err < 0) { + pr_err("TWL4030 Resource %d type could not be read\n", + rconfig->resource); + return err; + } + + if (rconfig->type >= 0) { + type &= ~TYPE_MASK; + type |= rconfig->type << TYPE_SHIFT; + } + + if (rconfig->type2 >= 0) { + type &= ~TYPE2_MASK; + type |= rconfig->type2 << TYPE2_SHIFT; + } + + err = twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, + type, rconfig_addr + TYPE_OFFSET); + if (err < 0) { + pr_err("TWL4030 failed to program resource type\n"); + return err; + } + + return 0; +} + +static int __init load_twl4030_script(struct twl4030_script *tscript, + u8 address) +{ + int err; + static int order; + + /* Make sure the script isn't going beyond last valid address (0x3f) */ + if ((address + tscript->size) > END_OF_SCRIPT) { + pr_err("TWL4030 scripts too big error\n"); + return -EINVAL; + } + + err = twl4030_write_script(address, tscript->script, tscript->size); + if (err) + goto out; + + if (tscript->flags & TWL4030_WRST_SCRIPT) { + err = twl4030_config_warmreset_sequence(address); + if (err) + goto out; + } + if (tscript->flags & TWL4030_WAKEUP12_SCRIPT) { + err = twl4030_config_wakeup12_sequence(address); + if (err) + goto out; + order = 1; + } + if (tscript->flags & TWL4030_WAKEUP3_SCRIPT) { + err = twl4030_config_wakeup3_sequence(address); + if (err) + goto out; + } + if (tscript->flags & TWL4030_SLEEP_SCRIPT) + if (order) + pr_warning("TWL4030: Bad order of scripts (sleep "\ + "script before wakeup) Leads to boot"\ + "failure on some boards\n"); + err = twl4030_config_sleep_sequence(address); +out: + return err; +} + +void __init twl4030_power_init(struct twl4030_power_data *twl4030_scripts) +{ + int err = 0; + int i; + struct twl4030_resconfig *resconfig; + u8 address = twl4030_start_script_address; + + err = twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, R_KEY_1, + R_PROTECT_KEY); + if (err) + goto unlock; + + err = twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, R_KEY_2, + R_PROTECT_KEY); + if (err) + goto unlock; + + for (i = 0; i < twl4030_scripts->num; i++) { + err = load_twl4030_script(twl4030_scripts->scripts[i], address); + if (err) + goto load; + address += twl4030_scripts->scripts[i]->size; + } + + resconfig = twl4030_scripts->resource_config; + if (resconfig) { + while (resconfig->resource) { + err = twl4030_configure_resource(resconfig); + if (err) + goto resource; + resconfig++; + + } + } + + err = twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, 0, R_PROTECT_KEY); + if (err) + pr_err("TWL4030 Unable to relock registers\n"); + return; + +unlock: + if (err) + pr_err("TWL4030 Unable to unlock registers\n"); + return; +load: + if (err) + pr_err("TWL4030 failed to load scripts\n"); + return; +resource: + if (err) + pr_err("TWL4030 failed to configure resource\n"); + return; +} diff --git a/drivers/mfd/wm831x-core.c b/drivers/mfd/wm831x-core.c new file mode 100644 index 00000000000..49b7885c270 --- /dev/null +++ b/drivers/mfd/wm831x-core.c @@ -0,0 +1,1549 @@ +/* + * wm831x-core.c -- Device access for Wolfson WM831x PMICs + * + * Copyright 2009 Wolfson Microelectronics PLC. + * + * Author: Mark Brown <broonie@opensource.wolfsonmicro.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/i2c.h> +#include <linux/bcd.h> +#include <linux/delay.h> +#include <linux/mfd/core.h> + +#include <linux/mfd/wm831x/core.h> +#include <linux/mfd/wm831x/pdata.h> +#include <linux/mfd/wm831x/irq.h> +#include <linux/mfd/wm831x/auxadc.h> +#include <linux/mfd/wm831x/otp.h> +#include <linux/mfd/wm831x/regulator.h> + +/* Current settings - values are 2*2^(reg_val/4) microamps. These are + * exported since they are used by multiple drivers. + */ +int wm831x_isinkv_values[WM831X_ISINK_MAX_ISEL] = { + 2, + 2, + 3, + 3, + 4, + 5, + 6, + 7, + 8, + 10, + 11, + 13, + 16, + 19, + 23, + 27, + 32, + 38, + 45, + 54, + 64, + 76, + 91, + 108, + 128, + 152, + 181, + 215, + 256, + 304, + 362, + 431, + 512, + 609, + 724, + 861, + 1024, + 1218, + 1448, + 1722, + 2048, + 2435, + 2896, + 3444, + 4096, + 4871, + 5793, + 6889, + 8192, + 9742, + 11585, + 13777, + 16384, + 19484, + 23170, + 27554, +}; +EXPORT_SYMBOL_GPL(wm831x_isinkv_values); + +enum wm831x_parent { + WM8310 = 0, + WM8311 = 1, + WM8312 = 2, +}; + +static int wm831x_reg_locked(struct wm831x *wm831x, unsigned short reg) +{ + if (!wm831x->locked) + return 0; + + switch (reg) { + case WM831X_WATCHDOG: + case WM831X_DC4_CONTROL: + case WM831X_ON_PIN_CONTROL: + case WM831X_BACKUP_CHARGER_CONTROL: + case WM831X_CHARGER_CONTROL_1: + case WM831X_CHARGER_CONTROL_2: + return 1; + + default: + return 0; + } +} + +/** + * wm831x_reg_unlock: Unlock user keyed registers + * + * The WM831x has a user key preventing writes to particularly + * critical registers. This function locks those registers, + * allowing writes to them. + */ +void wm831x_reg_lock(struct wm831x *wm831x) +{ + int ret; + + ret = wm831x_reg_write(wm831x, WM831X_SECURITY_KEY, 0); + if (ret == 0) { + dev_vdbg(wm831x->dev, "Registers locked\n"); + + mutex_lock(&wm831x->io_lock); + WARN_ON(wm831x->locked); + wm831x->locked = 1; + mutex_unlock(&wm831x->io_lock); + } else { + dev_err(wm831x->dev, "Failed to lock registers: %d\n", ret); + } + +} +EXPORT_SYMBOL_GPL(wm831x_reg_lock); + +/** + * wm831x_reg_unlock: Unlock user keyed registers + * + * The WM831x has a user key preventing writes to particularly + * critical registers. This function locks those registers, + * preventing spurious writes. + */ +int wm831x_reg_unlock(struct wm831x *wm831x) +{ + int ret; + + /* 0x9716 is the value required to unlock the registers */ + ret = wm831x_reg_write(wm831x, WM831X_SECURITY_KEY, 0x9716); + if (ret == 0) { + dev_vdbg(wm831x->dev, "Registers unlocked\n"); + + mutex_lock(&wm831x->io_lock); + WARN_ON(!wm831x->locked); + wm831x->locked = 0; + mutex_unlock(&wm831x->io_lock); + } + + return ret; +} +EXPORT_SYMBOL_GPL(wm831x_reg_unlock); + +static int wm831x_read(struct wm831x *wm831x, unsigned short reg, + int bytes, void *dest) +{ + int ret, i; + u16 *buf = dest; + + BUG_ON(bytes % 2); + BUG_ON(bytes <= 0); + + ret = wm831x->read_dev(wm831x, reg, bytes, dest); + if (ret < 0) + return ret; + + for (i = 0; i < bytes / 2; i++) { + buf[i] = be16_to_cpu(buf[i]); + + dev_vdbg(wm831x->dev, "Read %04x from R%d(0x%x)\n", + buf[i], reg + i, reg + i); + } + + return 0; +} + +/** + * wm831x_reg_read: Read a single WM831x register. + * + * @wm831x: Device to read from. + * @reg: Register to read. + */ +int wm831x_reg_read(struct wm831x *wm831x, unsigned short reg) +{ + unsigned short val; + int ret; + + mutex_lock(&wm831x->io_lock); + + ret = wm831x_read(wm831x, reg, 2, &val); + + mutex_unlock(&wm831x->io_lock); + + if (ret < 0) + return ret; + else + return val; +} +EXPORT_SYMBOL_GPL(wm831x_reg_read); + +/** + * wm831x_bulk_read: Read multiple WM831x registers + * + * @wm831x: Device to read from + * @reg: First register + * @count: Number of registers + * @buf: Buffer to fill. + */ +int wm831x_bulk_read(struct wm831x *wm831x, unsigned short reg, + int count, u16 *buf) +{ + int ret; + + mutex_lock(&wm831x->io_lock); + + ret = wm831x_read(wm831x, reg, count * 2, buf); + + mutex_unlock(&wm831x->io_lock); + + return ret; +} +EXPORT_SYMBOL_GPL(wm831x_bulk_read); + +static int wm831x_write(struct wm831x *wm831x, unsigned short reg, + int bytes, void *src) +{ + u16 *buf = src; + int i; + + BUG_ON(bytes % 2); + BUG_ON(bytes <= 0); + + for (i = 0; i < bytes / 2; i++) { + if (wm831x_reg_locked(wm831x, reg)) + return -EPERM; + + dev_vdbg(wm831x->dev, "Write %04x to R%d(0x%x)\n", + buf[i], reg + i, reg + i); + + buf[i] = cpu_to_be16(buf[i]); + } + + return wm831x->write_dev(wm831x, reg, bytes, src); +} + +/** + * wm831x_reg_write: Write a single WM831x register. + * + * @wm831x: Device to write to. + * @reg: Register to write to. + * @val: Value to write. + */ +int wm831x_reg_write(struct wm831x *wm831x, unsigned short reg, + unsigned short val) +{ + int ret; + + mutex_lock(&wm831x->io_lock); + + ret = wm831x_write(wm831x, reg, 2, &val); + + mutex_unlock(&wm831x->io_lock); + + return ret; +} +EXPORT_SYMBOL_GPL(wm831x_reg_write); + +/** + * wm831x_set_bits: Set the value of a bitfield in a WM831x register + * + * @wm831x: Device to write to. + * @reg: Register to write to. + * @mask: Mask of bits to set. + * @val: Value to set (unshifted) + */ +int wm831x_set_bits(struct wm831x *wm831x, unsigned short reg, + unsigned short mask, unsigned short val) +{ + int ret; + u16 r; + + mutex_lock(&wm831x->io_lock); + + ret = wm831x_read(wm831x, reg, 2, &r); + if (ret < 0) + goto out; + + r &= ~mask; + r |= val; + + ret = wm831x_write(wm831x, reg, 2, &r); + +out: + mutex_unlock(&wm831x->io_lock); + + return ret; +} +EXPORT_SYMBOL_GPL(wm831x_set_bits); + +/** + * wm831x_auxadc_read: Read a value from the WM831x AUXADC + * + * @wm831x: Device to read from. + * @input: AUXADC input to read. + */ +int wm831x_auxadc_read(struct wm831x *wm831x, enum wm831x_auxadc input) +{ + int tries = 10; + int ret, src; + + mutex_lock(&wm831x->auxadc_lock); + + ret = wm831x_set_bits(wm831x, WM831X_AUXADC_CONTROL, + WM831X_AUX_ENA, WM831X_AUX_ENA); + if (ret < 0) { + dev_err(wm831x->dev, "Failed to enable AUXADC: %d\n", ret); + goto out; + } + + /* We force a single source at present */ + src = input; + ret = wm831x_reg_write(wm831x, WM831X_AUXADC_SOURCE, + 1 << src); + if (ret < 0) { + dev_err(wm831x->dev, "Failed to set AUXADC source: %d\n", ret); + goto out; + } + + ret = wm831x_set_bits(wm831x, WM831X_AUXADC_CONTROL, + WM831X_AUX_CVT_ENA, WM831X_AUX_CVT_ENA); + if (ret < 0) { + dev_err(wm831x->dev, "Failed to start AUXADC: %d\n", ret); + goto disable; + } + + do { + msleep(1); + + ret = wm831x_reg_read(wm831x, WM831X_AUXADC_CONTROL); + if (ret < 0) + ret = WM831X_AUX_CVT_ENA; + } while ((ret & WM831X_AUX_CVT_ENA) && --tries); + + if (ret & WM831X_AUX_CVT_ENA) { + dev_err(wm831x->dev, "Timed out reading AUXADC\n"); + ret = -EBUSY; + goto disable; + } + + ret = wm831x_reg_read(wm831x, WM831X_AUXADC_DATA); + if (ret < 0) { + dev_err(wm831x->dev, "Failed to read AUXADC data: %d\n", ret); + } else { + src = ((ret & WM831X_AUX_DATA_SRC_MASK) + >> WM831X_AUX_DATA_SRC_SHIFT) - 1; + + if (src == 14) + src = WM831X_AUX_CAL; + + if (src != input) { + dev_err(wm831x->dev, "Data from source %d not %d\n", + src, input); + ret = -EINVAL; + } else { + ret &= WM831X_AUX_DATA_MASK; + } + } + +disable: + wm831x_set_bits(wm831x, WM831X_AUXADC_CONTROL, WM831X_AUX_ENA, 0); +out: + mutex_unlock(&wm831x->auxadc_lock); + return ret; +} +EXPORT_SYMBOL_GPL(wm831x_auxadc_read); + +/** + * wm831x_auxadc_read_uv: Read a voltage from the WM831x AUXADC + * + * @wm831x: Device to read from. + * @input: AUXADC input to read. + */ +int wm831x_auxadc_read_uv(struct wm831x *wm831x, enum wm831x_auxadc input) +{ + int ret; + + ret = wm831x_auxadc_read(wm831x, input); + if (ret < 0) + return ret; + + ret *= 1465; + + return ret; +} +EXPORT_SYMBOL_GPL(wm831x_auxadc_read_uv); + +static struct resource wm831x_dcdc1_resources[] = { + { + .start = WM831X_DC1_CONTROL_1, + .end = WM831X_DC1_DVS_CONTROL, + .flags = IORESOURCE_IO, + }, + { + .name = "UV", + .start = WM831X_IRQ_UV_DC1, + .end = WM831X_IRQ_UV_DC1, + .flags = IORESOURCE_IRQ, + }, + { + .name = "HC", + .start = WM831X_IRQ_HC_DC1, + .end = WM831X_IRQ_HC_DC1, + .flags = IORESOURCE_IRQ, + }, +}; + + +static struct resource wm831x_dcdc2_resources[] = { + { + .start = WM831X_DC2_CONTROL_1, + .end = WM831X_DC2_DVS_CONTROL, + .flags = IORESOURCE_IO, + }, + { + .name = "UV", + .start = WM831X_IRQ_UV_DC2, + .end = WM831X_IRQ_UV_DC2, + .flags = IORESOURCE_IRQ, + }, + { + .name = "HC", + .start = WM831X_IRQ_HC_DC2, + .end = WM831X_IRQ_HC_DC2, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct resource wm831x_dcdc3_resources[] = { + { + .start = WM831X_DC3_CONTROL_1, + .end = WM831X_DC3_SLEEP_CONTROL, + .flags = IORESOURCE_IO, + }, + { + .name = "UV", + .start = WM831X_IRQ_UV_DC3, + .end = WM831X_IRQ_UV_DC3, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct resource wm831x_dcdc4_resources[] = { + { + .start = WM831X_DC4_CONTROL, + .end = WM831X_DC4_SLEEP_CONTROL, + .flags = IORESOURCE_IO, + }, + { + .name = "UV", + .start = WM831X_IRQ_UV_DC4, + .end = WM831X_IRQ_UV_DC4, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct resource wm831x_gpio_resources[] = { + { + .start = WM831X_IRQ_GPIO_1, + .end = WM831X_IRQ_GPIO_16, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct resource wm831x_isink1_resources[] = { + { + .start = WM831X_CURRENT_SINK_1, + .end = WM831X_CURRENT_SINK_1, + .flags = IORESOURCE_IO, + }, + { + .start = WM831X_IRQ_CS1, + .end = WM831X_IRQ_CS1, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct resource wm831x_isink2_resources[] = { + { + .start = WM831X_CURRENT_SINK_2, + .end = WM831X_CURRENT_SINK_2, + .flags = IORESOURCE_IO, + }, + { + .start = WM831X_IRQ_CS2, + .end = WM831X_IRQ_CS2, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct resource wm831x_ldo1_resources[] = { + { + .start = WM831X_LDO1_CONTROL, + .end = WM831X_LDO1_SLEEP_CONTROL, + .flags = IORESOURCE_IO, + }, + { + .name = "UV", + .start = WM831X_IRQ_UV_LDO1, + .end = WM831X_IRQ_UV_LDO1, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct resource wm831x_ldo2_resources[] = { + { + .start = WM831X_LDO2_CONTROL, + .end = WM831X_LDO2_SLEEP_CONTROL, + .flags = IORESOURCE_IO, + }, + { + .name = "UV", + .start = WM831X_IRQ_UV_LDO2, + .end = WM831X_IRQ_UV_LDO2, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct resource wm831x_ldo3_resources[] = { + { + .start = WM831X_LDO3_CONTROL, + .end = WM831X_LDO3_SLEEP_CONTROL, + .flags = IORESOURCE_IO, + }, + { + .name = "UV", + .start = WM831X_IRQ_UV_LDO3, + .end = WM831X_IRQ_UV_LDO3, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct resource wm831x_ldo4_resources[] = { + { + .start = WM831X_LDO4_CONTROL, + .end = WM831X_LDO4_SLEEP_CONTROL, + .flags = IORESOURCE_IO, + }, + { + .name = "UV", + .start = WM831X_IRQ_UV_LDO4, + .end = WM831X_IRQ_UV_LDO4, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct resource wm831x_ldo5_resources[] = { + { + .start = WM831X_LDO5_CONTROL, + .end = WM831X_LDO5_SLEEP_CONTROL, + .flags = IORESOURCE_IO, + }, + { + .name = "UV", + .start = WM831X_IRQ_UV_LDO5, + .end = WM831X_IRQ_UV_LDO5, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct resource wm831x_ldo6_resources[] = { + { + .start = WM831X_LDO6_CONTROL, + .end = WM831X_LDO6_SLEEP_CONTROL, + .flags = IORESOURCE_IO, + }, + { + .name = "UV", + .start = WM831X_IRQ_UV_LDO6, + .end = WM831X_IRQ_UV_LDO6, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct resource wm831x_ldo7_resources[] = { + { + .start = WM831X_LDO7_CONTROL, + .end = WM831X_LDO7_SLEEP_CONTROL, + .flags = IORESOURCE_IO, + }, + { + .name = "UV", + .start = WM831X_IRQ_UV_LDO7, + .end = WM831X_IRQ_UV_LDO7, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct resource wm831x_ldo8_resources[] = { + { + .start = WM831X_LDO8_CONTROL, + .end = WM831X_LDO8_SLEEP_CONTROL, + .flags = IORESOURCE_IO, + }, + { + .name = "UV", + .start = WM831X_IRQ_UV_LDO8, + .end = WM831X_IRQ_UV_LDO8, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct resource wm831x_ldo9_resources[] = { + { + .start = WM831X_LDO9_CONTROL, + .end = WM831X_LDO9_SLEEP_CONTROL, + .flags = IORESOURCE_IO, + }, + { + .name = "UV", + .start = WM831X_IRQ_UV_LDO9, + .end = WM831X_IRQ_UV_LDO9, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct resource wm831x_ldo10_resources[] = { + { + .start = WM831X_LDO10_CONTROL, + .end = WM831X_LDO10_SLEEP_CONTROL, + .flags = IORESOURCE_IO, + }, + { + .name = "UV", + .start = WM831X_IRQ_UV_LDO10, + .end = WM831X_IRQ_UV_LDO10, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct resource wm831x_ldo11_resources[] = { + { + .start = WM831X_LDO11_ON_CONTROL, + .end = WM831X_LDO11_SLEEP_CONTROL, + .flags = IORESOURCE_IO, + }, +}; + +static struct resource wm831x_on_resources[] = { + { + .start = WM831X_IRQ_ON, + .end = WM831X_IRQ_ON, + .flags = IORESOURCE_IRQ, + }, +}; + + +static struct resource wm831x_power_resources[] = { + { + .name = "SYSLO", + .start = WM831X_IRQ_PPM_SYSLO, + .end = WM831X_IRQ_PPM_SYSLO, + .flags = IORESOURCE_IRQ, + }, + { + .name = "PWR SRC", + .start = WM831X_IRQ_PPM_PWR_SRC, + .end = WM831X_IRQ_PPM_PWR_SRC, + .flags = IORESOURCE_IRQ, + }, + { + .name = "USB CURR", + .start = WM831X_IRQ_PPM_USB_CURR, + .end = WM831X_IRQ_PPM_USB_CURR, + .flags = IORESOURCE_IRQ, + }, + { + .name = "BATT HOT", + .start = WM831X_IRQ_CHG_BATT_HOT, + .end = WM831X_IRQ_CHG_BATT_HOT, + .flags = IORESOURCE_IRQ, + }, + { + .name = "BATT COLD", + .start = WM831X_IRQ_CHG_BATT_COLD, + .end = WM831X_IRQ_CHG_BATT_COLD, + .flags = IORESOURCE_IRQ, + }, + { + .name = "BATT FAIL", + .start = WM831X_IRQ_CHG_BATT_FAIL, + .end = WM831X_IRQ_CHG_BATT_FAIL, + .flags = IORESOURCE_IRQ, + }, + { + .name = "OV", + .start = WM831X_IRQ_CHG_OV, + .end = WM831X_IRQ_CHG_OV, + .flags = IORESOURCE_IRQ, + }, + { + .name = "END", + .start = WM831X_IRQ_CHG_END, + .end = WM831X_IRQ_CHG_END, + .flags = IORESOURCE_IRQ, + }, + { + .name = "TO", + .start = WM831X_IRQ_CHG_TO, + .end = WM831X_IRQ_CHG_TO, + .flags = IORESOURCE_IRQ, + }, + { + .name = "MODE", + .start = WM831X_IRQ_CHG_MODE, + .end = WM831X_IRQ_CHG_MODE, + .flags = IORESOURCE_IRQ, + }, + { + .name = "START", + .start = WM831X_IRQ_CHG_START, + .end = WM831X_IRQ_CHG_START, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct resource wm831x_rtc_resources[] = { + { + .name = "PER", + .start = WM831X_IRQ_RTC_PER, + .end = WM831X_IRQ_RTC_PER, + .flags = IORESOURCE_IRQ, + }, + { + .name = "ALM", + .start = WM831X_IRQ_RTC_ALM, + .end = WM831X_IRQ_RTC_ALM, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct resource wm831x_status1_resources[] = { + { + .start = WM831X_STATUS_LED_1, + .end = WM831X_STATUS_LED_1, + .flags = IORESOURCE_IO, + }, +}; + +static struct resource wm831x_status2_resources[] = { + { + .start = WM831X_STATUS_LED_2, + .end = WM831X_STATUS_LED_2, + .flags = IORESOURCE_IO, + }, +}; + +static struct resource wm831x_touch_resources[] = { + { + .name = "TCHPD", + .start = WM831X_IRQ_TCHPD, + .end = WM831X_IRQ_TCHPD, + .flags = IORESOURCE_IRQ, + }, + { + .name = "TCHDATA", + .start = WM831X_IRQ_TCHDATA, + .end = WM831X_IRQ_TCHDATA, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct resource wm831x_wdt_resources[] = { + { + .start = WM831X_IRQ_WDOG_TO, + .end = WM831X_IRQ_WDOG_TO, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct mfd_cell wm8310_devs[] = { + { + .name = "wm831x-buckv", + .id = 1, + .num_resources = ARRAY_SIZE(wm831x_dcdc1_resources), + .resources = wm831x_dcdc1_resources, + }, + { + .name = "wm831x-buckv", + .id = 2, + .num_resources = ARRAY_SIZE(wm831x_dcdc2_resources), + .resources = wm831x_dcdc2_resources, + }, + { + .name = "wm831x-buckp", + .id = 3, + .num_resources = ARRAY_SIZE(wm831x_dcdc3_resources), + .resources = wm831x_dcdc3_resources, + }, + { + .name = "wm831x-boostp", + .id = 4, + .num_resources = ARRAY_SIZE(wm831x_dcdc4_resources), + .resources = wm831x_dcdc4_resources, + }, + { + .name = "wm831x-epe", + .id = 1, + }, + { + .name = "wm831x-epe", + .id = 2, + }, + { + .name = "wm831x-gpio", + .num_resources = ARRAY_SIZE(wm831x_gpio_resources), + .resources = wm831x_gpio_resources, + }, + { + .name = "wm831x-hwmon", + }, + { + .name = "wm831x-isink", + .id = 1, + .num_resources = ARRAY_SIZE(wm831x_isink1_resources), + .resources = wm831x_isink1_resources, + }, + { + .name = "wm831x-isink", + .id = 2, + .num_resources = ARRAY_SIZE(wm831x_isink2_resources), + .resources = wm831x_isink2_resources, + }, + { + .name = "wm831x-ldo", + .id = 1, + .num_resources = ARRAY_SIZE(wm831x_ldo1_resources), + .resources = wm831x_ldo1_resources, + }, + { + .name = "wm831x-ldo", + .id = 2, + .num_resources = ARRAY_SIZE(wm831x_ldo2_resources), + .resources = wm831x_ldo2_resources, + }, + { + .name = "wm831x-ldo", + .id = 3, + .num_resources = ARRAY_SIZE(wm831x_ldo3_resources), + .resources = wm831x_ldo3_resources, + }, + { + .name = "wm831x-ldo", + .id = 4, + .num_resources = ARRAY_SIZE(wm831x_ldo4_resources), + .resources = wm831x_ldo4_resources, + }, + { + .name = "wm831x-ldo", + .id = 5, + .num_resources = ARRAY_SIZE(wm831x_ldo5_resources), + .resources = wm831x_ldo5_resources, + }, + { + .name = "wm831x-ldo", + .id = 6, + .num_resources = ARRAY_SIZE(wm831x_ldo6_resources), + .resources = wm831x_ldo6_resources, + }, + { + .name = "wm831x-aldo", + .id = 7, + .num_resources = ARRAY_SIZE(wm831x_ldo7_resources), + .resources = wm831x_ldo7_resources, + }, + { + .name = "wm831x-aldo", + .id = 8, + .num_resources = ARRAY_SIZE(wm831x_ldo8_resources), + .resources = wm831x_ldo8_resources, + }, + { + .name = "wm831x-aldo", + .id = 9, + .num_resources = ARRAY_SIZE(wm831x_ldo9_resources), + .resources = wm831x_ldo9_resources, + }, + { + .name = "wm831x-aldo", + .id = 10, + .num_resources = ARRAY_SIZE(wm831x_ldo10_resources), + .resources = wm831x_ldo10_resources, + }, + { + .name = "wm831x-alive-ldo", + .id = 11, + .num_resources = ARRAY_SIZE(wm831x_ldo11_resources), + .resources = wm831x_ldo11_resources, + }, + { + .name = "wm831x-on", + .num_resources = ARRAY_SIZE(wm831x_on_resources), + .resources = wm831x_on_resources, + }, + { + .name = "wm831x-power", + .num_resources = ARRAY_SIZE(wm831x_power_resources), + .resources = wm831x_power_resources, + }, + { + .name = "wm831x-rtc", + .num_resources = ARRAY_SIZE(wm831x_rtc_resources), + .resources = wm831x_rtc_resources, + }, + { + .name = "wm831x-status", + .id = 1, + .num_resources = ARRAY_SIZE(wm831x_status1_resources), + .resources = wm831x_status1_resources, + }, + { + .name = "wm831x-status", + .id = 2, + .num_resources = ARRAY_SIZE(wm831x_status2_resources), + .resources = wm831x_status2_resources, + }, + { + .name = "wm831x-watchdog", + .num_resources = ARRAY_SIZE(wm831x_wdt_resources), + .resources = wm831x_wdt_resources, + }, +}; + +static struct mfd_cell wm8311_devs[] = { + { + .name = "wm831x-buckv", + .id = 1, + .num_resources = ARRAY_SIZE(wm831x_dcdc1_resources), + .resources = wm831x_dcdc1_resources, + }, + { + .name = "wm831x-buckv", + .id = 2, + .num_resources = ARRAY_SIZE(wm831x_dcdc2_resources), + .resources = wm831x_dcdc2_resources, + }, + { + .name = "wm831x-buckp", + .id = 3, + .num_resources = ARRAY_SIZE(wm831x_dcdc3_resources), + .resources = wm831x_dcdc3_resources, + }, + { + .name = "wm831x-boostp", + .id = 4, + .num_resources = ARRAY_SIZE(wm831x_dcdc4_resources), + .resources = wm831x_dcdc4_resources, + }, + { + .name = "wm831x-epe", + .id = 1, + }, + { + .name = "wm831x-epe", + .id = 2, + }, + { + .name = "wm831x-gpio", + .num_resources = ARRAY_SIZE(wm831x_gpio_resources), + .resources = wm831x_gpio_resources, + }, + { + .name = "wm831x-hwmon", + }, + { + .name = "wm831x-isink", + .id = 1, + .num_resources = ARRAY_SIZE(wm831x_isink1_resources), + .resources = wm831x_isink1_resources, + }, + { + .name = "wm831x-isink", + .id = 2, + .num_resources = ARRAY_SIZE(wm831x_isink2_resources), + .resources = wm831x_isink2_resources, + }, + { + .name = "wm831x-ldo", + .id = 1, + .num_resources = ARRAY_SIZE(wm831x_ldo1_resources), + .resources = wm831x_ldo1_resources, + }, + { + .name = "wm831x-ldo", + .id = 2, + .num_resources = ARRAY_SIZE(wm831x_ldo2_resources), + .resources = wm831x_ldo2_resources, + }, + { + .name = "wm831x-ldo", + .id = 3, + .num_resources = ARRAY_SIZE(wm831x_ldo3_resources), + .resources = wm831x_ldo3_resources, + }, + { + .name = "wm831x-ldo", + .id = 4, + .num_resources = ARRAY_SIZE(wm831x_ldo4_resources), + .resources = wm831x_ldo4_resources, + }, + { + .name = "wm831x-ldo", + .id = 5, + .num_resources = ARRAY_SIZE(wm831x_ldo5_resources), + .resources = wm831x_ldo5_resources, + }, + { + .name = "wm831x-aldo", + .id = 7, + .num_resources = ARRAY_SIZE(wm831x_ldo7_resources), + .resources = wm831x_ldo7_resources, + }, + { + .name = "wm831x-alive-ldo", + .id = 11, + .num_resources = ARRAY_SIZE(wm831x_ldo11_resources), + .resources = wm831x_ldo11_resources, + }, + { + .name = "wm831x-on", + .num_resources = ARRAY_SIZE(wm831x_on_resources), + .resources = wm831x_on_resources, + }, + { + .name = "wm831x-power", + .num_resources = ARRAY_SIZE(wm831x_power_resources), + .resources = wm831x_power_resources, + }, + { + .name = "wm831x-rtc", + .num_resources = ARRAY_SIZE(wm831x_rtc_resources), + .resources = wm831x_rtc_resources, + }, + { + .name = "wm831x-status", + .id = 1, + .num_resources = ARRAY_SIZE(wm831x_status1_resources), + .resources = wm831x_status1_resources, + }, + { + .name = "wm831x-status", + .id = 2, + .num_resources = ARRAY_SIZE(wm831x_status2_resources), + .resources = wm831x_status2_resources, + }, + { + .name = "wm831x-touch", + .num_resources = ARRAY_SIZE(wm831x_touch_resources), + .resources = wm831x_touch_resources, + }, + { + .name = "wm831x-watchdog", + .num_resources = ARRAY_SIZE(wm831x_wdt_resources), + .resources = wm831x_wdt_resources, + }, +}; + +static struct mfd_cell wm8312_devs[] = { + { + .name = "wm831x-buckv", + .id = 1, + .num_resources = ARRAY_SIZE(wm831x_dcdc1_resources), + .resources = wm831x_dcdc1_resources, + }, + { + .name = "wm831x-buckv", + .id = 2, + .num_resources = ARRAY_SIZE(wm831x_dcdc2_resources), + .resources = wm831x_dcdc2_resources, + }, + { + .name = "wm831x-buckp", + .id = 3, + .num_resources = ARRAY_SIZE(wm831x_dcdc3_resources), + .resources = wm831x_dcdc3_resources, + }, + { + .name = "wm831x-boostp", + .id = 4, + .num_resources = ARRAY_SIZE(wm831x_dcdc4_resources), + .resources = wm831x_dcdc4_resources, + }, + { + .name = "wm831x-epe", + .id = 1, + }, + { + .name = "wm831x-epe", + .id = 2, + }, + { + .name = "wm831x-gpio", + .num_resources = ARRAY_SIZE(wm831x_gpio_resources), + .resources = wm831x_gpio_resources, + }, + { + .name = "wm831x-hwmon", + }, + { + .name = "wm831x-isink", + .id = 1, + .num_resources = ARRAY_SIZE(wm831x_isink1_resources), + .resources = wm831x_isink1_resources, + }, + { + .name = "wm831x-isink", + .id = 2, + .num_resources = ARRAY_SIZE(wm831x_isink2_resources), + .resources = wm831x_isink2_resources, + }, + { + .name = "wm831x-ldo", + .id = 1, + .num_resources = ARRAY_SIZE(wm831x_ldo1_resources), + .resources = wm831x_ldo1_resources, + }, + { + .name = "wm831x-ldo", + .id = 2, + .num_resources = ARRAY_SIZE(wm831x_ldo2_resources), + .resources = wm831x_ldo2_resources, + }, + { + .name = "wm831x-ldo", + .id = 3, + .num_resources = ARRAY_SIZE(wm831x_ldo3_resources), + .resources = wm831x_ldo3_resources, + }, + { + .name = "wm831x-ldo", + .id = 4, + .num_resources = ARRAY_SIZE(wm831x_ldo4_resources), + .resources = wm831x_ldo4_resources, + }, + { + .name = "wm831x-ldo", + .id = 5, + .num_resources = ARRAY_SIZE(wm831x_ldo5_resources), + .resources = wm831x_ldo5_resources, + }, + { + .name = "wm831x-ldo", + .id = 6, + .num_resources = ARRAY_SIZE(wm831x_ldo6_resources), + .resources = wm831x_ldo6_resources, + }, + { + .name = "wm831x-aldo", + .id = 7, + .num_resources = ARRAY_SIZE(wm831x_ldo7_resources), + .resources = wm831x_ldo7_resources, + }, + { + .name = "wm831x-aldo", + .id = 8, + .num_resources = ARRAY_SIZE(wm831x_ldo8_resources), + .resources = wm831x_ldo8_resources, + }, + { + .name = "wm831x-aldo", + .id = 9, + .num_resources = ARRAY_SIZE(wm831x_ldo9_resources), + .resources = wm831x_ldo9_resources, + }, + { + .name = "wm831x-aldo", + .id = 10, + .num_resources = ARRAY_SIZE(wm831x_ldo10_resources), + .resources = wm831x_ldo10_resources, + }, + { + .name = "wm831x-alive-ldo", + .id = 11, + .num_resources = ARRAY_SIZE(wm831x_ldo11_resources), + .resources = wm831x_ldo11_resources, + }, + { + .name = "wm831x-on", + .num_resources = ARRAY_SIZE(wm831x_on_resources), + .resources = wm831x_on_resources, + }, + { + .name = "wm831x-power", + .num_resources = ARRAY_SIZE(wm831x_power_resources), + .resources = wm831x_power_resources, + }, + { + .name = "wm831x-rtc", + .num_resources = ARRAY_SIZE(wm831x_rtc_resources), + .resources = wm831x_rtc_resources, + }, + { + .name = "wm831x-status", + .id = 1, + .num_resources = ARRAY_SIZE(wm831x_status1_resources), + .resources = wm831x_status1_resources, + }, + { + .name = "wm831x-status", + .id = 2, + .num_resources = ARRAY_SIZE(wm831x_status2_resources), + .resources = wm831x_status2_resources, + }, + { + .name = "wm831x-touch", + .num_resources = ARRAY_SIZE(wm831x_touch_resources), + .resources = wm831x_touch_resources, + }, + { + .name = "wm831x-watchdog", + .num_resources = ARRAY_SIZE(wm831x_wdt_resources), + .resources = wm831x_wdt_resources, + }, +}; + +static struct mfd_cell backlight_devs[] = { + { + .name = "wm831x-backlight", + }, +}; + +/* + * Instantiate the generic non-control parts of the device. + */ +static int wm831x_device_init(struct wm831x *wm831x, unsigned long id, int irq) +{ + struct wm831x_pdata *pdata = wm831x->dev->platform_data; + int rev; + enum wm831x_parent parent; + int ret; + + mutex_init(&wm831x->io_lock); + mutex_init(&wm831x->key_lock); + mutex_init(&wm831x->auxadc_lock); + dev_set_drvdata(wm831x->dev, wm831x); + + ret = wm831x_reg_read(wm831x, WM831X_PARENT_ID); + if (ret < 0) { + dev_err(wm831x->dev, "Failed to read parent ID: %d\n", ret); + goto err; + } + if (ret != 0x6204) { + dev_err(wm831x->dev, "Device is not a WM831x: ID %x\n", ret); + ret = -EINVAL; + goto err; + } + + ret = wm831x_reg_read(wm831x, WM831X_REVISION); + if (ret < 0) { + dev_err(wm831x->dev, "Failed to read revision: %d\n", ret); + goto err; + } + rev = (ret & WM831X_PARENT_REV_MASK) >> WM831X_PARENT_REV_SHIFT; + + ret = wm831x_reg_read(wm831x, WM831X_RESET_ID); + if (ret < 0) { + dev_err(wm831x->dev, "Failed to read device ID: %d\n", ret); + goto err; + } + + switch (ret) { + case 0x8310: + parent = WM8310; + switch (rev) { + case 0: + dev_info(wm831x->dev, "WM8310 revision %c\n", + 'A' + rev); + break; + } + break; + + case 0x8311: + parent = WM8311; + switch (rev) { + case 0: + dev_info(wm831x->dev, "WM8311 revision %c\n", + 'A' + rev); + break; + } + break; + + case 0x8312: + parent = WM8312; + switch (rev) { + case 0: + dev_info(wm831x->dev, "WM8312 revision %c\n", + 'A' + rev); + break; + } + break; + + case 0: + /* Some engineering samples do not have the ID set, + * rely on the device being registered correctly. + * This will need revisiting for future devices with + * multiple dies. + */ + parent = id; + switch (rev) { + case 0: + dev_info(wm831x->dev, "WM831%d ES revision %c\n", + parent, 'A' + rev); + break; + } + break; + + default: + dev_err(wm831x->dev, "Unknown WM831x device %04x\n", ret); + ret = -EINVAL; + goto err; + } + + /* This will need revisiting in future but is OK for all + * current parts. + */ + if (parent != id) + dev_warn(wm831x->dev, "Device was registered as a WM831%lu\n", + id); + + /* Bootstrap the user key */ + ret = wm831x_reg_read(wm831x, WM831X_SECURITY_KEY); + if (ret < 0) { + dev_err(wm831x->dev, "Failed to read security key: %d\n", ret); + goto err; + } + if (ret != 0) { + dev_warn(wm831x->dev, "Security key had non-zero value %x\n", + ret); + wm831x_reg_write(wm831x, WM831X_SECURITY_KEY, 0); + } + wm831x->locked = 1; + + if (pdata && pdata->pre_init) { + ret = pdata->pre_init(wm831x); + if (ret != 0) { + dev_err(wm831x->dev, "pre_init() failed: %d\n", ret); + goto err; + } + } + + ret = wm831x_irq_init(wm831x, irq); + if (ret != 0) + goto err; + + /* The core device is up, instantiate the subdevices. */ + switch (parent) { + case WM8310: + ret = mfd_add_devices(wm831x->dev, -1, + wm8310_devs, ARRAY_SIZE(wm8310_devs), + NULL, 0); + break; + + case WM8311: + ret = mfd_add_devices(wm831x->dev, -1, + wm8311_devs, ARRAY_SIZE(wm8311_devs), + NULL, 0); + break; + + case WM8312: + ret = mfd_add_devices(wm831x->dev, -1, + wm8312_devs, ARRAY_SIZE(wm8312_devs), + NULL, 0); + break; + + default: + /* If this happens the bus probe function is buggy */ + BUG(); + } + + if (ret != 0) { + dev_err(wm831x->dev, "Failed to add children\n"); + goto err_irq; + } + + if (pdata && pdata->backlight) { + /* Treat errors as non-critical */ + ret = mfd_add_devices(wm831x->dev, -1, backlight_devs, + ARRAY_SIZE(backlight_devs), NULL, 0); + if (ret < 0) + dev_err(wm831x->dev, "Failed to add backlight: %d\n", + ret); + } + + wm831x_otp_init(wm831x); + + if (pdata && pdata->post_init) { + ret = pdata->post_init(wm831x); + if (ret != 0) { + dev_err(wm831x->dev, "post_init() failed: %d\n", ret); + goto err_irq; + } + } + + return 0; + +err_irq: + wm831x_irq_exit(wm831x); +err: + mfd_remove_devices(wm831x->dev); + kfree(wm831x); + return ret; +} + +static void wm831x_device_exit(struct wm831x *wm831x) +{ + wm831x_otp_exit(wm831x); + mfd_remove_devices(wm831x->dev); + wm831x_irq_exit(wm831x); + kfree(wm831x); +} + +static int wm831x_i2c_read_device(struct wm831x *wm831x, unsigned short reg, + int bytes, void *dest) +{ + struct i2c_client *i2c = wm831x->control_data; + int ret; + u16 r = cpu_to_be16(reg); + + ret = i2c_master_send(i2c, (unsigned char *)&r, 2); + if (ret < 0) + return ret; + if (ret != 2) + return -EIO; + + ret = i2c_master_recv(i2c, dest, bytes); + if (ret < 0) + return ret; + if (ret != bytes) + return -EIO; + return 0; +} + +/* Currently we allocate the write buffer on the stack; this is OK for + * small writes - if we need to do large writes this will need to be + * revised. + */ +static int wm831x_i2c_write_device(struct wm831x *wm831x, unsigned short reg, + int bytes, void *src) +{ + struct i2c_client *i2c = wm831x->control_data; + unsigned char msg[bytes + 2]; + int ret; + + reg = cpu_to_be16(reg); + memcpy(&msg[0], ®, 2); + memcpy(&msg[2], src, bytes); + + ret = i2c_master_send(i2c, msg, bytes + 2); + if (ret < 0) + return ret; + if (ret < bytes + 2) + return -EIO; + + return 0; +} + +static int wm831x_i2c_probe(struct i2c_client *i2c, + const struct i2c_device_id *id) +{ + struct wm831x *wm831x; + + wm831x = kzalloc(sizeof(struct wm831x), GFP_KERNEL); + if (wm831x == NULL) { + kfree(i2c); + return -ENOMEM; + } + + i2c_set_clientdata(i2c, wm831x); + wm831x->dev = &i2c->dev; + wm831x->control_data = i2c; + wm831x->read_dev = wm831x_i2c_read_device; + wm831x->write_dev = wm831x_i2c_write_device; + + return wm831x_device_init(wm831x, id->driver_data, i2c->irq); +} + +static int wm831x_i2c_remove(struct i2c_client *i2c) +{ + struct wm831x *wm831x = i2c_get_clientdata(i2c); + + wm831x_device_exit(wm831x); + + return 0; +} + +static const struct i2c_device_id wm831x_i2c_id[] = { + { "wm8310", WM8310 }, + { "wm8311", WM8311 }, + { "wm8312", WM8312 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, wm831x_i2c_id); + + +static struct i2c_driver wm831x_i2c_driver = { + .driver = { + .name = "wm831x", + .owner = THIS_MODULE, + }, + .probe = wm831x_i2c_probe, + .remove = wm831x_i2c_remove, + .id_table = wm831x_i2c_id, +}; + +static int __init wm831x_i2c_init(void) +{ + int ret; + + ret = i2c_add_driver(&wm831x_i2c_driver); + if (ret != 0) + pr_err("Failed to register wm831x I2C driver: %d\n", ret); + + return ret; +} +subsys_initcall(wm831x_i2c_init); + +static void __exit wm831x_i2c_exit(void) +{ + i2c_del_driver(&wm831x_i2c_driver); +} +module_exit(wm831x_i2c_exit); + +MODULE_DESCRIPTION("I2C support for the WM831X AudioPlus PMIC"); +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Mark Brown"); diff --git a/drivers/mfd/wm831x-irq.c b/drivers/mfd/wm831x-irq.c new file mode 100644 index 00000000000..d3015dfb913 --- /dev/null +++ b/drivers/mfd/wm831x-irq.c @@ -0,0 +1,559 @@ +/* + * wm831x-irq.c -- Interrupt controller support for Wolfson WM831x PMICs + * + * Copyright 2009 Wolfson Microelectronics PLC. + * + * Author: Mark Brown <broonie@opensource.wolfsonmicro.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/i2c.h> +#include <linux/mfd/core.h> +#include <linux/interrupt.h> + +#include <linux/mfd/wm831x/core.h> +#include <linux/mfd/wm831x/pdata.h> +#include <linux/mfd/wm831x/irq.h> + +#include <linux/delay.h> + +/* + * Since generic IRQs don't currently support interrupt controllers on + * interrupt driven buses we don't use genirq but instead provide an + * interface that looks very much like the standard ones. This leads + * to some bodges, including storing interrupt handler information in + * the static irq_data table we use to look up the data for individual + * interrupts, but hopefully won't last too long. + */ + +struct wm831x_irq_data { + int primary; + int reg; + int mask; + irq_handler_t handler; + void *handler_data; +}; + +static struct wm831x_irq_data wm831x_irqs[] = { + [WM831X_IRQ_TEMP_THW] = { + .primary = WM831X_TEMP_INT, + .reg = 1, + .mask = WM831X_TEMP_THW_EINT, + }, + [WM831X_IRQ_GPIO_1] = { + .primary = WM831X_GP_INT, + .reg = 5, + .mask = WM831X_GP1_EINT, + }, + [WM831X_IRQ_GPIO_2] = { + .primary = WM831X_GP_INT, + .reg = 5, + .mask = WM831X_GP2_EINT, + }, + [WM831X_IRQ_GPIO_3] = { + .primary = WM831X_GP_INT, + .reg = 5, + .mask = WM831X_GP3_EINT, + }, + [WM831X_IRQ_GPIO_4] = { + .primary = WM831X_GP_INT, + .reg = 5, + .mask = WM831X_GP4_EINT, + }, + [WM831X_IRQ_GPIO_5] = { + .primary = WM831X_GP_INT, + .reg = 5, + .mask = WM831X_GP5_EINT, + }, + [WM831X_IRQ_GPIO_6] = { + .primary = WM831X_GP_INT, + .reg = 5, + .mask = WM831X_GP6_EINT, + }, + [WM831X_IRQ_GPIO_7] = { + .primary = WM831X_GP_INT, + .reg = 5, + .mask = WM831X_GP7_EINT, + }, + [WM831X_IRQ_GPIO_8] = { + .primary = WM831X_GP_INT, + .reg = 5, + .mask = WM831X_GP8_EINT, + }, + [WM831X_IRQ_GPIO_9] = { + .primary = WM831X_GP_INT, + .reg = 5, + .mask = WM831X_GP9_EINT, + }, + [WM831X_IRQ_GPIO_10] = { + .primary = WM831X_GP_INT, + .reg = 5, + .mask = WM831X_GP10_EINT, + }, + [WM831X_IRQ_GPIO_11] = { + .primary = WM831X_GP_INT, + .reg = 5, + .mask = WM831X_GP11_EINT, + }, + [WM831X_IRQ_GPIO_12] = { + .primary = WM831X_GP_INT, + .reg = 5, + .mask = WM831X_GP12_EINT, + }, + [WM831X_IRQ_GPIO_13] = { + .primary = WM831X_GP_INT, + .reg = 5, + .mask = WM831X_GP13_EINT, + }, + [WM831X_IRQ_GPIO_14] = { + .primary = WM831X_GP_INT, + .reg = 5, + .mask = WM831X_GP14_EINT, + }, + [WM831X_IRQ_GPIO_15] = { + .primary = WM831X_GP_INT, + .reg = 5, + .mask = WM831X_GP15_EINT, + }, + [WM831X_IRQ_GPIO_16] = { + .primary = WM831X_GP_INT, + .reg = 5, + .mask = WM831X_GP16_EINT, + }, + [WM831X_IRQ_ON] = { + .primary = WM831X_ON_PIN_INT, + .reg = 1, + .mask = WM831X_ON_PIN_EINT, + }, + [WM831X_IRQ_PPM_SYSLO] = { + .primary = WM831X_PPM_INT, + .reg = 1, + .mask = WM831X_PPM_SYSLO_EINT, + }, + [WM831X_IRQ_PPM_PWR_SRC] = { + .primary = WM831X_PPM_INT, + .reg = 1, + .mask = WM831X_PPM_PWR_SRC_EINT, + }, + [WM831X_IRQ_PPM_USB_CURR] = { + .primary = WM831X_PPM_INT, + .reg = 1, + .mask = WM831X_PPM_USB_CURR_EINT, + }, + [WM831X_IRQ_WDOG_TO] = { + .primary = WM831X_WDOG_INT, + .reg = 1, + .mask = WM831X_WDOG_TO_EINT, + }, + [WM831X_IRQ_RTC_PER] = { + .primary = WM831X_RTC_INT, + .reg = 1, + .mask = WM831X_RTC_PER_EINT, + }, + [WM831X_IRQ_RTC_ALM] = { + .primary = WM831X_RTC_INT, + .reg = 1, + .mask = WM831X_RTC_ALM_EINT, + }, + [WM831X_IRQ_CHG_BATT_HOT] = { + .primary = WM831X_CHG_INT, + .reg = 2, + .mask = WM831X_CHG_BATT_HOT_EINT, + }, + [WM831X_IRQ_CHG_BATT_COLD] = { + .primary = WM831X_CHG_INT, + .reg = 2, + .mask = WM831X_CHG_BATT_COLD_EINT, + }, + [WM831X_IRQ_CHG_BATT_FAIL] = { + .primary = WM831X_CHG_INT, + .reg = 2, + .mask = WM831X_CHG_BATT_FAIL_EINT, + }, + [WM831X_IRQ_CHG_OV] = { + .primary = WM831X_CHG_INT, + .reg = 2, + .mask = WM831X_CHG_OV_EINT, + }, + [WM831X_IRQ_CHG_END] = { + .primary = WM831X_CHG_INT, + .reg = 2, + .mask = WM831X_CHG_END_EINT, + }, + [WM831X_IRQ_CHG_TO] = { + .primary = WM831X_CHG_INT, + .reg = 2, + .mask = WM831X_CHG_TO_EINT, + }, + [WM831X_IRQ_CHG_MODE] = { + .primary = WM831X_CHG_INT, + .reg = 2, + .mask = WM831X_CHG_MODE_EINT, + }, + [WM831X_IRQ_CHG_START] = { + .primary = WM831X_CHG_INT, + .reg = 2, + .mask = WM831X_CHG_START_EINT, + }, + [WM831X_IRQ_TCHDATA] = { + .primary = WM831X_TCHDATA_INT, + .reg = 1, + .mask = WM831X_TCHDATA_EINT, + }, + [WM831X_IRQ_TCHPD] = { + .primary = WM831X_TCHPD_INT, + .reg = 1, + .mask = WM831X_TCHPD_EINT, + }, + [WM831X_IRQ_AUXADC_DATA] = { + .primary = WM831X_AUXADC_INT, + .reg = 1, + .mask = WM831X_AUXADC_DATA_EINT, + }, + [WM831X_IRQ_AUXADC_DCOMP1] = { + .primary = WM831X_AUXADC_INT, + .reg = 1, + .mask = WM831X_AUXADC_DCOMP1_EINT, + }, + [WM831X_IRQ_AUXADC_DCOMP2] = { + .primary = WM831X_AUXADC_INT, + .reg = 1, + .mask = WM831X_AUXADC_DCOMP2_EINT, + }, + [WM831X_IRQ_AUXADC_DCOMP3] = { + .primary = WM831X_AUXADC_INT, + .reg = 1, + .mask = WM831X_AUXADC_DCOMP3_EINT, + }, + [WM831X_IRQ_AUXADC_DCOMP4] = { + .primary = WM831X_AUXADC_INT, + .reg = 1, + .mask = WM831X_AUXADC_DCOMP4_EINT, + }, + [WM831X_IRQ_CS1] = { + .primary = WM831X_CS_INT, + .reg = 2, + .mask = WM831X_CS1_EINT, + }, + [WM831X_IRQ_CS2] = { + .primary = WM831X_CS_INT, + .reg = 2, + .mask = WM831X_CS2_EINT, + }, + [WM831X_IRQ_HC_DC1] = { + .primary = WM831X_HC_INT, + .reg = 4, + .mask = WM831X_HC_DC1_EINT, + }, + [WM831X_IRQ_HC_DC2] = { + .primary = WM831X_HC_INT, + .reg = 4, + .mask = WM831X_HC_DC2_EINT, + }, + [WM831X_IRQ_UV_LDO1] = { + .primary = WM831X_UV_INT, + .reg = 3, + .mask = WM831X_UV_LDO1_EINT, + }, + [WM831X_IRQ_UV_LDO2] = { + .primary = WM831X_UV_INT, + .reg = 3, + .mask = WM831X_UV_LDO2_EINT, + }, + [WM831X_IRQ_UV_LDO3] = { + .primary = WM831X_UV_INT, + .reg = 3, + .mask = WM831X_UV_LDO3_EINT, + }, + [WM831X_IRQ_UV_LDO4] = { + .primary = WM831X_UV_INT, + .reg = 3, + .mask = WM831X_UV_LDO4_EINT, + }, + [WM831X_IRQ_UV_LDO5] = { + .primary = WM831X_UV_INT, + .reg = 3, + .mask = WM831X_UV_LDO5_EINT, + }, + [WM831X_IRQ_UV_LDO6] = { + .primary = WM831X_UV_INT, + .reg = 3, + .mask = WM831X_UV_LDO6_EINT, + }, + [WM831X_IRQ_UV_LDO7] = { + .primary = WM831X_UV_INT, + .reg = 3, + .mask = WM831X_UV_LDO7_EINT, + }, + [WM831X_IRQ_UV_LDO8] = { + .primary = WM831X_UV_INT, + .reg = 3, + .mask = WM831X_UV_LDO8_EINT, + }, + [WM831X_IRQ_UV_LDO9] = { + .primary = WM831X_UV_INT, + .reg = 3, + .mask = WM831X_UV_LDO9_EINT, + }, + [WM831X_IRQ_UV_LDO10] = { + .primary = WM831X_UV_INT, + .reg = 3, + .mask = WM831X_UV_LDO10_EINT, + }, + [WM831X_IRQ_UV_DC1] = { + .primary = WM831X_UV_INT, + .reg = 4, + .mask = WM831X_UV_DC1_EINT, + }, + [WM831X_IRQ_UV_DC2] = { + .primary = WM831X_UV_INT, + .reg = 4, + .mask = WM831X_UV_DC2_EINT, + }, + [WM831X_IRQ_UV_DC3] = { + .primary = WM831X_UV_INT, + .reg = 4, + .mask = WM831X_UV_DC3_EINT, + }, + [WM831X_IRQ_UV_DC4] = { + .primary = WM831X_UV_INT, + .reg = 4, + .mask = WM831X_UV_DC4_EINT, + }, +}; + +static inline int irq_data_to_status_reg(struct wm831x_irq_data *irq_data) +{ + return WM831X_INTERRUPT_STATUS_1 - 1 + irq_data->reg; +} + +static inline int irq_data_to_mask_reg(struct wm831x_irq_data *irq_data) +{ + return WM831X_INTERRUPT_STATUS_1_MASK - 1 + irq_data->reg; +} + +static void __wm831x_enable_irq(struct wm831x *wm831x, int irq) +{ + struct wm831x_irq_data *irq_data = &wm831x_irqs[irq]; + + wm831x->irq_masks[irq_data->reg - 1] &= ~irq_data->mask; + wm831x_reg_write(wm831x, irq_data_to_mask_reg(irq_data), + wm831x->irq_masks[irq_data->reg - 1]); +} + +void wm831x_enable_irq(struct wm831x *wm831x, int irq) +{ + mutex_lock(&wm831x->irq_lock); + __wm831x_enable_irq(wm831x, irq); + mutex_unlock(&wm831x->irq_lock); +} +EXPORT_SYMBOL_GPL(wm831x_enable_irq); + +static void __wm831x_disable_irq(struct wm831x *wm831x, int irq) +{ + struct wm831x_irq_data *irq_data = &wm831x_irqs[irq]; + + wm831x->irq_masks[irq_data->reg - 1] |= irq_data->mask; + wm831x_reg_write(wm831x, irq_data_to_mask_reg(irq_data), + wm831x->irq_masks[irq_data->reg - 1]); +} + +void wm831x_disable_irq(struct wm831x *wm831x, int irq) +{ + mutex_lock(&wm831x->irq_lock); + __wm831x_disable_irq(wm831x, irq); + mutex_unlock(&wm831x->irq_lock); +} +EXPORT_SYMBOL_GPL(wm831x_disable_irq); + +int wm831x_request_irq(struct wm831x *wm831x, + unsigned int irq, irq_handler_t handler, + unsigned long flags, const char *name, + void *dev) +{ + int ret = 0; + + if (irq < 0 || irq >= WM831X_NUM_IRQS) + return -EINVAL; + + mutex_lock(&wm831x->irq_lock); + + if (wm831x_irqs[irq].handler) { + dev_err(wm831x->dev, "Already have handler for IRQ %d\n", irq); + ret = -EINVAL; + goto out; + } + + wm831x_irqs[irq].handler = handler; + wm831x_irqs[irq].handler_data = dev; + + __wm831x_enable_irq(wm831x, irq); + +out: + mutex_unlock(&wm831x->irq_lock); + + return ret; +} +EXPORT_SYMBOL_GPL(wm831x_request_irq); + +void wm831x_free_irq(struct wm831x *wm831x, unsigned int irq, void *data) +{ + if (irq < 0 || irq >= WM831X_NUM_IRQS) + return; + + mutex_lock(&wm831x->irq_lock); + + wm831x_irqs[irq].handler = NULL; + wm831x_irqs[irq].handler_data = NULL; + + __wm831x_disable_irq(wm831x, irq); + + mutex_unlock(&wm831x->irq_lock); +} +EXPORT_SYMBOL_GPL(wm831x_free_irq); + + +static void wm831x_handle_irq(struct wm831x *wm831x, int irq, int status) +{ + struct wm831x_irq_data *irq_data = &wm831x_irqs[irq]; + + if (irq_data->handler) { + irq_data->handler(irq, irq_data->handler_data); + wm831x_reg_write(wm831x, irq_data_to_status_reg(irq_data), + irq_data->mask); + } else { + dev_err(wm831x->dev, "Unhandled IRQ %d, masking\n", irq); + __wm831x_disable_irq(wm831x, irq); + } +} + +/* Main interrupt handling occurs in a workqueue since we need + * interrupts enabled to interact with the chip. */ +static void wm831x_irq_worker(struct work_struct *work) +{ + struct wm831x *wm831x = container_of(work, struct wm831x, irq_work); + unsigned int i; + int primary; + int status_regs[5]; + int read[5] = { 0 }; + int *status; + + primary = wm831x_reg_read(wm831x, WM831X_SYSTEM_INTERRUPTS); + if (primary < 0) { + dev_err(wm831x->dev, "Failed to read system interrupt: %d\n", + primary); + goto out; + } + + mutex_lock(&wm831x->irq_lock); + + for (i = 0; i < ARRAY_SIZE(wm831x_irqs); i++) { + int offset = wm831x_irqs[i].reg - 1; + + if (!(primary & wm831x_irqs[i].primary)) + continue; + + status = &status_regs[offset]; + + /* Hopefully there should only be one register to read + * each time otherwise we ought to do a block read. */ + if (!read[offset]) { + *status = wm831x_reg_read(wm831x, + irq_data_to_status_reg(&wm831x_irqs[i])); + if (*status < 0) { + dev_err(wm831x->dev, + "Failed to read IRQ status: %d\n", + *status); + goto out_lock; + } + + /* Mask out the disabled IRQs */ + *status &= ~wm831x->irq_masks[offset]; + read[offset] = 1; + } + + if (*status & wm831x_irqs[i].mask) + wm831x_handle_irq(wm831x, i, *status); + } + +out_lock: + mutex_unlock(&wm831x->irq_lock); +out: + enable_irq(wm831x->irq); +} + + +static irqreturn_t wm831x_cpu_irq(int irq, void *data) +{ + struct wm831x *wm831x = data; + + /* Shut the interrupt to the CPU up and schedule the actual + * handler; we can't check that the IRQ is asserted. */ + disable_irq_nosync(irq); + + queue_work(wm831x->irq_wq, &wm831x->irq_work); + + return IRQ_HANDLED; +} + +int wm831x_irq_init(struct wm831x *wm831x, int irq) +{ + int i, ret; + + if (!irq) { + dev_warn(wm831x->dev, + "No interrupt specified - functionality limited\n"); + return 0; + } + + + wm831x->irq_wq = create_singlethread_workqueue("wm831x-irq"); + if (!wm831x->irq_wq) { + dev_err(wm831x->dev, "Failed to allocate IRQ worker\n"); + return -ESRCH; + } + + wm831x->irq = irq; + mutex_init(&wm831x->irq_lock); + INIT_WORK(&wm831x->irq_work, wm831x_irq_worker); + + /* Mask the individual interrupt sources */ + for (i = 0; i < ARRAY_SIZE(wm831x->irq_masks); i++) { + wm831x->irq_masks[i] = 0xffff; + wm831x_reg_write(wm831x, WM831X_INTERRUPT_STATUS_1_MASK + i, + 0xffff); + } + + /* Enable top level interrupts, we mask at secondary level */ + wm831x_reg_write(wm831x, WM831X_SYSTEM_INTERRUPTS_MASK, 0); + + /* We're good to go. We set IRQF_SHARED since there's a + * chance the driver will interoperate with another driver but + * the need to disable the IRQ while handing via I2C/SPI means + * that this may break and performance will be impacted. If + * this does happen it's a hardware design issue and the only + * other alternative would be polling. + */ + ret = request_irq(irq, wm831x_cpu_irq, IRQF_TRIGGER_LOW | IRQF_SHARED, + "wm831x", wm831x); + if (ret != 0) { + dev_err(wm831x->dev, "Failed to request IRQ %d: %d\n", + irq, ret); + return ret; + } + + return 0; +} + +void wm831x_irq_exit(struct wm831x *wm831x) +{ + if (wm831x->irq) + free_irq(wm831x->irq, wm831x); +} diff --git a/drivers/mfd/wm831x-otp.c b/drivers/mfd/wm831x-otp.c new file mode 100644 index 00000000000..f742745ff35 --- /dev/null +++ b/drivers/mfd/wm831x-otp.c @@ -0,0 +1,83 @@ +/* + * wm831x-otp.c -- OTP for Wolfson WM831x PMICs + * + * Copyright 2009 Wolfson Microelectronics PLC. + * + * Author: Mark Brown <broonie@opensource.wolfsonmicro.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/i2c.h> +#include <linux/bcd.h> +#include <linux/delay.h> +#include <linux/mfd/core.h> + +#include <linux/mfd/wm831x/core.h> +#include <linux/mfd/wm831x/otp.h> + +/* In bytes */ +#define WM831X_UNIQUE_ID_LEN 16 + +/* Read the unique ID from the chip into id */ +static int wm831x_unique_id_read(struct wm831x *wm831x, char *id) +{ + int i, val; + + for (i = 0; i < WM831X_UNIQUE_ID_LEN / 2; i++) { + val = wm831x_reg_read(wm831x, WM831X_UNIQUE_ID_1 + i); + if (val < 0) + return val; + + id[i * 2] = (val >> 8) & 0xff; + id[(i * 2) + 1] = val & 0xff; + } + + return 0; +} + +static ssize_t wm831x_unique_id_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct wm831x *wm831x = dev_get_drvdata(dev); + int i, rval; + char id[WM831X_UNIQUE_ID_LEN]; + ssize_t ret = 0; + + rval = wm831x_unique_id_read(wm831x, id); + if (rval < 0) + return 0; + + for (i = 0; i < WM831X_UNIQUE_ID_LEN; i++) + ret += sprintf(&buf[ret], "%02x", buf[i]); + + ret += sprintf(&buf[ret], "\n"); + + return ret; +} + +static DEVICE_ATTR(unique_id, 0444, wm831x_unique_id_show, NULL); + +int wm831x_otp_init(struct wm831x *wm831x) +{ + int ret; + + ret = device_create_file(wm831x->dev, &dev_attr_unique_id); + if (ret != 0) + dev_err(wm831x->dev, "Unique ID attribute not created: %d\n", + ret); + + return ret; +} + +void wm831x_otp_exit(struct wm831x *wm831x) +{ + device_remove_file(wm831x->dev, &dev_attr_unique_id); +} + diff --git a/drivers/mfd/wm8350-core.c b/drivers/mfd/wm8350-core.c index fe24079387c..ba27c9dc1ad 100644 --- a/drivers/mfd/wm8350-core.c +++ b/drivers/mfd/wm8350-core.c @@ -353,15 +353,15 @@ static void wm8350_irq_call_handler(struct wm8350 *wm8350, int irq) } /* - * wm8350_irq_worker actually handles the interrupts. Since all + * This is a threaded IRQ handler so can access I2C/SPI. Since all * interrupts are clear on read the IRQ line will be reasserted and * the physical IRQ will be handled again if another interrupt is * asserted while we run - in the normal course of events this is a * rare occurrence so we save I2C/SPI reads. */ -static void wm8350_irq_worker(struct work_struct *work) +static irqreturn_t wm8350_irq(int irq, void *data) { - struct wm8350 *wm8350 = container_of(work, struct wm8350, irq_work); + struct wm8350 *wm8350 = data; u16 level_one, status1, status2, comp; /* TODO: Use block reads to improve performance? */ @@ -552,16 +552,6 @@ static void wm8350_irq_worker(struct work_struct *work) } } - enable_irq(wm8350->chip_irq); -} - -static irqreturn_t wm8350_irq(int irq, void *data) -{ - struct wm8350 *wm8350 = data; - - disable_irq_nosync(irq); - schedule_work(&wm8350->irq_work); - return IRQ_HANDLED; } @@ -1428,9 +1418,8 @@ int wm8350_device_init(struct wm8350 *wm8350, int irq, mutex_init(&wm8350->auxadc_mutex); mutex_init(&wm8350->irq_mutex); - INIT_WORK(&wm8350->irq_work, wm8350_irq_worker); if (irq) { - int flags = 0; + int flags = IRQF_ONESHOT; if (pdata && pdata->irq_high) { flags |= IRQF_TRIGGER_HIGH; @@ -1444,8 +1433,8 @@ int wm8350_device_init(struct wm8350 *wm8350, int irq, WM8350_IRQ_POL); } - ret = request_irq(irq, wm8350_irq, flags, - "wm8350", wm8350); + ret = request_threaded_irq(irq, NULL, wm8350_irq, flags, + "wm8350", wm8350); if (ret != 0) { dev_err(wm8350->dev, "Failed to request IRQ: %d\n", ret); @@ -1472,6 +1461,8 @@ int wm8350_device_init(struct wm8350 *wm8350, int irq, &(wm8350->codec.pdev)); wm8350_client_dev_register(wm8350, "wm8350-gpio", &(wm8350->gpio.pdev)); + wm8350_client_dev_register(wm8350, "wm8350-hwmon", + &(wm8350->hwmon.pdev)); wm8350_client_dev_register(wm8350, "wm8350-power", &(wm8350->power.pdev)); wm8350_client_dev_register(wm8350, "wm8350-rtc", &(wm8350->rtc.pdev)); @@ -1498,11 +1489,11 @@ void wm8350_device_exit(struct wm8350 *wm8350) platform_device_unregister(wm8350->wdt.pdev); platform_device_unregister(wm8350->rtc.pdev); platform_device_unregister(wm8350->power.pdev); + platform_device_unregister(wm8350->hwmon.pdev); platform_device_unregister(wm8350->gpio.pdev); platform_device_unregister(wm8350->codec.pdev); free_irq(wm8350->chip_irq, wm8350); - flush_work(&wm8350->irq_work); kfree(wm8350->reg_cache); } EXPORT_SYMBOL_GPL(wm8350_device_exit); diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig index f4317798e47..2dc42bbf6fe 100644 --- a/drivers/regulator/Kconfig +++ b/drivers/regulator/Kconfig @@ -82,6 +82,13 @@ config REGULATOR_TWL4030 This driver supports the voltage regulators provided by this family of companion chips. +config REGULATOR_WM831X + tristate "Wolfson Microelcronics WM831x PMIC regulators" + depends on MFD_WM831X + help + Support the voltage and current regulators of the WM831x series + of PMIC devices. + config REGULATOR_WM8350 tristate "Wolfson Microelectroncis WM8350 AudioPlus PMIC" depends on MFD_WM8350 @@ -117,4 +124,28 @@ config REGULATOR_LP3971 Say Y here to support the voltage regulators and convertors on National Semiconductors LP3971 PMIC +config REGULATOR_PCAP + tristate "PCAP2 regulator driver" + depends on EZX_PCAP + help + This driver provides support for the voltage regulators of the + PCAP2 PMIC. + +config REGULATOR_MC13783 + tristate "Support regulators on Freescale MC13783 PMIC" + depends on MFD_MC13783 + help + Say y here to support the regulators found on the Freescale MC13783 + PMIC. + +config REGULATOR_AB3100 + tristate "ST-Ericsson AB3100 Regulator functions" + depends on AB3100_CORE + default y if AB3100_CORE + help + These regulators correspond to functionality in the + AB3100 analog baseband dealing with power regulators + for the system. + endif + diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile index 4d762c4cccf..768b3316d6e 100644 --- a/drivers/regulator/Makefile +++ b/drivers/regulator/Makefile @@ -12,9 +12,15 @@ obj-$(CONFIG_REGULATOR_BQ24022) += bq24022.o obj-$(CONFIG_REGULATOR_LP3971) += lp3971.o obj-$(CONFIG_REGULATOR_MAX1586) += max1586.o obj-$(CONFIG_REGULATOR_TWL4030) += twl4030-regulator.o +obj-$(CONFIG_REGULATOR_WM831X) += wm831x-dcdc.o +obj-$(CONFIG_REGULATOR_WM831X) += wm831x-isink.o +obj-$(CONFIG_REGULATOR_WM831X) += wm831x-ldo.o obj-$(CONFIG_REGULATOR_WM8350) += wm8350-regulator.o obj-$(CONFIG_REGULATOR_WM8400) += wm8400-regulator.o obj-$(CONFIG_REGULATOR_DA903X) += da903x.o obj-$(CONFIG_REGULATOR_PCF50633) += pcf50633-regulator.o +obj-$(CONFIG_REGULATOR_PCAP) += pcap-regulator.o +obj-$(CONFIG_REGULATOR_MC13783) += mc13783.o +obj-$(CONFIG_REGULATOR_AB3100) += ab3100.o ccflags-$(CONFIG_REGULATOR_DEBUG) += -DDEBUG diff --git a/drivers/regulator/ab3100.c b/drivers/regulator/ab3100.c new file mode 100644 index 00000000000..49aeee823a2 --- /dev/null +++ b/drivers/regulator/ab3100.c @@ -0,0 +1,700 @@ +/* + * drivers/regulator/ab3100.c + * + * Copyright (C) 2008-2009 ST-Ericsson AB + * License terms: GNU General Public License (GPL) version 2 + * Low-level control of the AB3100 IC Low Dropout (LDO) + * regulators, external regulator and buck converter + * Author: Mattias Wallin <mattias.wallin@stericsson.com> + * Author: Linus Walleij <linus.walleij@stericsson.com> + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/err.h> +#include <linux/delay.h> +#include <linux/platform_device.h> +#include <linux/regulator/driver.h> +#include <linux/mfd/ab3100.h> + +/* LDO registers and some handy masking definitions for AB3100 */ +#define AB3100_LDO_A 0x40 +#define AB3100_LDO_C 0x41 +#define AB3100_LDO_D 0x42 +#define AB3100_LDO_E 0x43 +#define AB3100_LDO_E_SLEEP 0x44 +#define AB3100_LDO_F 0x45 +#define AB3100_LDO_G 0x46 +#define AB3100_LDO_H 0x47 +#define AB3100_LDO_H_SLEEP_MODE 0 +#define AB3100_LDO_H_SLEEP_EN 2 +#define AB3100_LDO_ON 4 +#define AB3100_LDO_H_VSEL_AC 5 +#define AB3100_LDO_K 0x48 +#define AB3100_LDO_EXT 0x49 +#define AB3100_BUCK 0x4A +#define AB3100_BUCK_SLEEP 0x4B +#define AB3100_REG_ON_MASK 0x10 + +/** + * struct ab3100_regulator + * A struct passed around the individual regulator functions + * @platform_device: platform device holding this regulator + * @ab3100: handle to the AB3100 parent chip + * @plfdata: AB3100 platform data passed in at probe time + * @regreg: regulator register number in the AB3100 + * @fixed_voltage: a fixed voltage for this regulator, if this + * 0 the voltages array is used instead. + * @typ_voltages: an array of available typical voltages for + * this regulator + * @voltages_len: length of the array of available voltages + */ +struct ab3100_regulator { + struct regulator_dev *rdev; + struct ab3100 *ab3100; + struct ab3100_platform_data *plfdata; + u8 regreg; + int fixed_voltage; + int const *typ_voltages; + u8 voltages_len; +}; + +/* The order in which registers are initialized */ +static const u8 ab3100_reg_init_order[AB3100_NUM_REGULATORS+2] = { + AB3100_LDO_A, + AB3100_LDO_C, + AB3100_LDO_E, + AB3100_LDO_E_SLEEP, + AB3100_LDO_F, + AB3100_LDO_G, + AB3100_LDO_H, + AB3100_LDO_K, + AB3100_LDO_EXT, + AB3100_BUCK, + AB3100_BUCK_SLEEP, + AB3100_LDO_D, +}; + +/* Preset (hardware defined) voltages for these regulators */ +#define LDO_A_VOLTAGE 2750000 +#define LDO_C_VOLTAGE 2650000 +#define LDO_D_VOLTAGE 2650000 + +static const int const ldo_e_buck_typ_voltages[] = { + 1800000, + 1400000, + 1300000, + 1200000, + 1100000, + 1050000, + 900000, +}; + +static const int const ldo_f_typ_voltages[] = { + 1800000, + 1400000, + 1300000, + 1200000, + 1100000, + 1050000, + 2500000, + 2650000, +}; + +static const int const ldo_g_typ_voltages[] = { + 2850000, + 2750000, + 1800000, + 1500000, +}; + +static const int const ldo_h_typ_voltages[] = { + 2750000, + 1800000, + 1500000, + 1200000, +}; + +static const int const ldo_k_typ_voltages[] = { + 2750000, + 1800000, +}; + + +/* The regulator devices */ +static struct ab3100_regulator +ab3100_regulators[AB3100_NUM_REGULATORS] = { + { + .regreg = AB3100_LDO_A, + .fixed_voltage = LDO_A_VOLTAGE, + }, + { + .regreg = AB3100_LDO_C, + .fixed_voltage = LDO_C_VOLTAGE, + }, + { + .regreg = AB3100_LDO_D, + .fixed_voltage = LDO_D_VOLTAGE, + }, + { + .regreg = AB3100_LDO_E, + .typ_voltages = ldo_e_buck_typ_voltages, + .voltages_len = ARRAY_SIZE(ldo_e_buck_typ_voltages), + }, + { + .regreg = AB3100_LDO_F, + .typ_voltages = ldo_f_typ_voltages, + .voltages_len = ARRAY_SIZE(ldo_f_typ_voltages), + }, + { + .regreg = AB3100_LDO_G, + .typ_voltages = ldo_g_typ_voltages, + .voltages_len = ARRAY_SIZE(ldo_g_typ_voltages), + }, + { + .regreg = AB3100_LDO_H, + .typ_voltages = ldo_h_typ_voltages, + .voltages_len = ARRAY_SIZE(ldo_h_typ_voltages), + }, + { + .regreg = AB3100_LDO_K, + .typ_voltages = ldo_k_typ_voltages, + .voltages_len = ARRAY_SIZE(ldo_k_typ_voltages), + }, + { + .regreg = AB3100_LDO_EXT, + /* No voltages for the external regulator */ + }, + { + .regreg = AB3100_BUCK, + .typ_voltages = ldo_e_buck_typ_voltages, + .voltages_len = ARRAY_SIZE(ldo_e_buck_typ_voltages), + }, +}; + +/* + * General functions for enable, disable and is_enabled used for + * LDO: A,C,E,F,G,H,K,EXT and BUCK + */ +static int ab3100_enable_regulator(struct regulator_dev *reg) +{ + struct ab3100_regulator *abreg = reg->reg_data; + int err; + u8 regval; + + err = ab3100_get_register_interruptible(abreg->ab3100, abreg->regreg, + ®val); + if (err) { + dev_warn(®->dev, "failed to get regid %d value\n", + abreg->regreg); + return err; + } + + /* The regulator is already on, no reason to go further */ + if (regval & AB3100_REG_ON_MASK) + return 0; + + regval |= AB3100_REG_ON_MASK; + + err = ab3100_set_register_interruptible(abreg->ab3100, abreg->regreg, + regval); + if (err) { + dev_warn(®->dev, "failed to set regid %d value\n", + abreg->regreg); + return err; + } + + /* Per-regulator power on delay from spec */ + switch (abreg->regreg) { + case AB3100_LDO_A: /* Fallthrough */ + case AB3100_LDO_C: /* Fallthrough */ + case AB3100_LDO_D: /* Fallthrough */ + case AB3100_LDO_E: /* Fallthrough */ + case AB3100_LDO_H: /* Fallthrough */ + case AB3100_LDO_K: + udelay(200); + break; + case AB3100_LDO_F: + udelay(600); + break; + case AB3100_LDO_G: + udelay(400); + break; + case AB3100_BUCK: + mdelay(1); + break; + default: + break; + } + + return 0; +} + +static int ab3100_disable_regulator(struct regulator_dev *reg) +{ + struct ab3100_regulator *abreg = reg->reg_data; + int err; + u8 regval; + + /* + * LDO D is a special regulator. When it is disabled, the entire + * system is shut down. So this is handled specially. + */ + if (abreg->regreg == AB3100_LDO_D) { + int i; + + dev_info(®->dev, "disabling LDO D - shut down system\n"); + /* + * Set regulators to default values, ignore any errors, + * we're going DOWN + */ + for (i = 0; i < ARRAY_SIZE(ab3100_reg_init_order); i++) { + (void) ab3100_set_register_interruptible(abreg->ab3100, + ab3100_reg_init_order[i], + abreg->plfdata->reg_initvals[i]); + } + + /* Setting LDO D to 0x00 cuts the power to the SoC */ + return ab3100_set_register_interruptible(abreg->ab3100, + AB3100_LDO_D, 0x00U); + + } + + /* + * All other regulators are handled here + */ + err = ab3100_get_register_interruptible(abreg->ab3100, abreg->regreg, + ®val); + if (err) { + dev_err(®->dev, "unable to get register 0x%x\n", + abreg->regreg); + return err; + } + regval &= ~AB3100_REG_ON_MASK; + return ab3100_set_register_interruptible(abreg->ab3100, abreg->regreg, + regval); +} + +static int ab3100_is_enabled_regulator(struct regulator_dev *reg) +{ + struct ab3100_regulator *abreg = reg->reg_data; + u8 regval; + int err; + + err = ab3100_get_register_interruptible(abreg->ab3100, abreg->regreg, + ®val); + if (err) { + dev_err(®->dev, "unable to get register 0x%x\n", + abreg->regreg); + return err; + } + + return regval & AB3100_REG_ON_MASK; +} + +static int ab3100_list_voltage_regulator(struct regulator_dev *reg, + unsigned selector) +{ + struct ab3100_regulator *abreg = reg->reg_data; + + if (selector > abreg->voltages_len) + return -EINVAL; + return abreg->typ_voltages[selector]; +} + +static int ab3100_get_voltage_regulator(struct regulator_dev *reg) +{ + struct ab3100_regulator *abreg = reg->reg_data; + u8 regval; + int err; + + /* Return the voltage for fixed regulators immediately */ + if (abreg->fixed_voltage) + return abreg->fixed_voltage; + + /* + * For variable types, read out setting and index into + * supplied voltage list. + */ + err = ab3100_get_register_interruptible(abreg->ab3100, + abreg->regreg, ®val); + if (err) { + dev_warn(®->dev, + "failed to get regulator value in register %02x\n", + abreg->regreg); + return err; + } + + /* The 3 highest bits index voltages */ + regval &= 0xE0; + regval >>= 5; + + if (regval > abreg->voltages_len) { + dev_err(®->dev, + "regulator register %02x contains an illegal voltage setting\n", + abreg->regreg); + return -EINVAL; + } + + return abreg->typ_voltages[regval]; +} + +static int ab3100_get_best_voltage_index(struct regulator_dev *reg, + int min_uV, int max_uV) +{ + struct ab3100_regulator *abreg = reg->reg_data; + int i; + int bestmatch; + int bestindex; + + /* + * Locate the minimum voltage fitting the criteria on + * this regulator. The switchable voltages are not + * in strict falling order so we need to check them + * all for the best match. + */ + bestmatch = INT_MAX; + bestindex = -1; + for (i = 0; i < abreg->voltages_len; i++) { + if (abreg->typ_voltages[i] <= max_uV && + abreg->typ_voltages[i] >= min_uV && + abreg->typ_voltages[i] < bestmatch) { + bestmatch = abreg->typ_voltages[i]; + bestindex = i; + } + } + + if (bestindex < 0) { + dev_warn(®->dev, "requested %d<=x<=%d uV, out of range!\n", + min_uV, max_uV); + return -EINVAL; + } + return bestindex; +} + +static int ab3100_set_voltage_regulator(struct regulator_dev *reg, + int min_uV, int max_uV) +{ + struct ab3100_regulator *abreg = reg->reg_data; + u8 regval; + int err; + int bestindex; + + bestindex = ab3100_get_best_voltage_index(reg, min_uV, max_uV); + if (bestindex < 0) + return bestindex; + + err = ab3100_get_register_interruptible(abreg->ab3100, + abreg->regreg, ®val); + if (err) { + dev_warn(®->dev, + "failed to get regulator register %02x\n", + abreg->regreg); + return err; + } + + /* The highest three bits control the variable regulators */ + regval &= ~0xE0; + regval |= (bestindex << 5); + + err = ab3100_set_register_interruptible(abreg->ab3100, + abreg->regreg, regval); + if (err) + dev_warn(®->dev, "failed to set regulator register %02x\n", + abreg->regreg); + + return err; +} + +static int ab3100_set_suspend_voltage_regulator(struct regulator_dev *reg, + int uV) +{ + struct ab3100_regulator *abreg = reg->reg_data; + u8 regval; + int err; + int bestindex; + u8 targetreg; + + if (abreg->regreg == AB3100_LDO_E) + targetreg = AB3100_LDO_E_SLEEP; + else if (abreg->regreg == AB3100_BUCK) + targetreg = AB3100_BUCK_SLEEP; + else + return -EINVAL; + + /* LDO E and BUCK have special suspend voltages you can set */ + bestindex = ab3100_get_best_voltage_index(reg, uV, uV); + + err = ab3100_get_register_interruptible(abreg->ab3100, + targetreg, ®val); + if (err) { + dev_warn(®->dev, + "failed to get regulator register %02x\n", + targetreg); + return err; + } + + /* The highest three bits control the variable regulators */ + regval &= ~0xE0; + regval |= (bestindex << 5); + + err = ab3100_set_register_interruptible(abreg->ab3100, + targetreg, regval); + if (err) + dev_warn(®->dev, "failed to set regulator register %02x\n", + abreg->regreg); + + return err; +} + +/* + * The external regulator can just define a fixed voltage. + */ +static int ab3100_get_voltage_regulator_external(struct regulator_dev *reg) +{ + struct ab3100_regulator *abreg = reg->reg_data; + + return abreg->plfdata->external_voltage; +} + +static struct regulator_ops regulator_ops_fixed = { + .enable = ab3100_enable_regulator, + .disable = ab3100_disable_regulator, + .is_enabled = ab3100_is_enabled_regulator, + .get_voltage = ab3100_get_voltage_regulator, +}; + +static struct regulator_ops regulator_ops_variable = { + .enable = ab3100_enable_regulator, + .disable = ab3100_disable_regulator, + .is_enabled = ab3100_is_enabled_regulator, + .get_voltage = ab3100_get_voltage_regulator, + .set_voltage = ab3100_set_voltage_regulator, + .list_voltage = ab3100_list_voltage_regulator, +}; + +static struct regulator_ops regulator_ops_variable_sleepable = { + .enable = ab3100_enable_regulator, + .disable = ab3100_disable_regulator, + .is_enabled = ab3100_is_enabled_regulator, + .get_voltage = ab3100_get_voltage_regulator, + .set_voltage = ab3100_set_voltage_regulator, + .set_suspend_voltage = ab3100_set_suspend_voltage_regulator, + .list_voltage = ab3100_list_voltage_regulator, +}; + +/* + * LDO EXT is an external regulator so it is really + * not possible to set any voltage locally here, AB3100 + * is an on/off switch plain an simple. The external + * voltage is defined in the board set-up if any. + */ +static struct regulator_ops regulator_ops_external = { + .enable = ab3100_enable_regulator, + .disable = ab3100_disable_regulator, + .is_enabled = ab3100_is_enabled_regulator, + .get_voltage = ab3100_get_voltage_regulator_external, +}; + +static struct regulator_desc +ab3100_regulator_desc[AB3100_NUM_REGULATORS] = { + { + .name = "LDO_A", + .id = AB3100_LDO_A, + .ops = ®ulator_ops_fixed, + .type = REGULATOR_VOLTAGE, + }, + { + .name = "LDO_C", + .id = AB3100_LDO_C, + .ops = ®ulator_ops_fixed, + .type = REGULATOR_VOLTAGE, + }, + { + .name = "LDO_D", + .id = AB3100_LDO_D, + .ops = ®ulator_ops_fixed, + .type = REGULATOR_VOLTAGE, + }, + { + .name = "LDO_E", + .id = AB3100_LDO_E, + .ops = ®ulator_ops_variable_sleepable, + .n_voltages = ARRAY_SIZE(ldo_e_buck_typ_voltages), + .type = REGULATOR_VOLTAGE, + }, + { + .name = "LDO_F", + .id = AB3100_LDO_F, + .ops = ®ulator_ops_variable, + .n_voltages = ARRAY_SIZE(ldo_f_typ_voltages), + .type = REGULATOR_VOLTAGE, + }, + { + .name = "LDO_G", + .id = AB3100_LDO_G, + .ops = ®ulator_ops_variable, + .n_voltages = ARRAY_SIZE(ldo_g_typ_voltages), + .type = REGULATOR_VOLTAGE, + }, + { + .name = "LDO_H", + .id = AB3100_LDO_H, + .ops = ®ulator_ops_variable, + .n_voltages = ARRAY_SIZE(ldo_h_typ_voltages), + .type = REGULATOR_VOLTAGE, + }, + { + .name = "LDO_K", + .id = AB3100_LDO_K, + .ops = ®ulator_ops_variable, + .n_voltages = ARRAY_SIZE(ldo_k_typ_voltages), + .type = REGULATOR_VOLTAGE, + }, + { + .name = "LDO_EXT", + .id = AB3100_LDO_EXT, + .ops = ®ulator_ops_external, + .type = REGULATOR_VOLTAGE, + }, + { + .name = "BUCK", + .id = AB3100_BUCK, + .ops = ®ulator_ops_variable_sleepable, + .n_voltages = ARRAY_SIZE(ldo_e_buck_typ_voltages), + .type = REGULATOR_VOLTAGE, + }, +}; + +/* + * NOTE: the following functions are regulators pluralis - it is the + * binding to the AB3100 core driver and the parent platform device + * for all the different regulators. + */ + +static int __init ab3100_regulators_probe(struct platform_device *pdev) +{ + struct ab3100_platform_data *plfdata = pdev->dev.platform_data; + struct ab3100 *ab3100 = platform_get_drvdata(pdev); + int err = 0; + u8 data; + int i; + + /* Check chip state */ + err = ab3100_get_register_interruptible(ab3100, + AB3100_LDO_D, &data); + if (err) { + dev_err(&pdev->dev, "could not read initial status of LDO_D\n"); + return err; + } + if (data & 0x10) + dev_notice(&pdev->dev, + "chip is already in active mode (Warm start)\n"); + else + dev_notice(&pdev->dev, + "chip is in inactive mode (Cold start)\n"); + + /* Set up regulators */ + for (i = 0; i < ARRAY_SIZE(ab3100_reg_init_order); i++) { + err = ab3100_set_register_interruptible(ab3100, + ab3100_reg_init_order[i], + plfdata->reg_initvals[i]); + if (err) { + dev_err(&pdev->dev, "regulator initialization failed with error %d\n", + err); + return err; + } + } + + if (err) { + dev_err(&pdev->dev, + "LDO D regulator initialization failed with error %d\n", + err); + return err; + } + + /* Register the regulators */ + for (i = 0; i < AB3100_NUM_REGULATORS; i++) { + struct ab3100_regulator *reg = &ab3100_regulators[i]; + struct regulator_dev *rdev; + + /* + * Initialize per-regulator struct. + * Inherit platform data, this comes down from the + * i2c boarddata, from the machine. So if you want to + * see what it looks like for a certain machine, go + * into the machine I2C setup. + */ + reg->ab3100 = ab3100; + reg->plfdata = plfdata; + + /* + * Register the regulator, pass around + * the ab3100_regulator struct + */ + rdev = regulator_register(&ab3100_regulator_desc[i], + &pdev->dev, + &plfdata->reg_constraints[i], + reg); + + if (IS_ERR(rdev)) { + err = PTR_ERR(rdev); + dev_err(&pdev->dev, + "%s: failed to register regulator %s err %d\n", + __func__, ab3100_regulator_desc[i].name, + err); + i--; + /* remove the already registered regulators */ + while (i > 0) { + regulator_unregister(ab3100_regulators[i].rdev); + i--; + } + return err; + } + + /* Then set a pointer back to the registered regulator */ + reg->rdev = rdev; + } + + return 0; +} + +static int __exit ab3100_regulators_remove(struct platform_device *pdev) +{ + int i; + + for (i = 0; i < AB3100_NUM_REGULATORS; i++) { + struct ab3100_regulator *reg = &ab3100_regulators[i]; + + regulator_unregister(reg->rdev); + } + return 0; +} + +static struct platform_driver ab3100_regulators_driver = { + .driver = { + .name = "ab3100-regulators", + .owner = THIS_MODULE, + }, + .probe = ab3100_regulators_probe, + .remove = __exit_p(ab3100_regulators_remove), +}; + +static __init int ab3100_regulators_init(void) +{ + return platform_driver_register(&ab3100_regulators_driver); +} + +static __exit void ab3100_regulators_exit(void) +{ + platform_driver_register(&ab3100_regulators_driver); +} + +subsys_initcall(ab3100_regulators_init); +module_exit(ab3100_regulators_exit); + +MODULE_AUTHOR("Mattias Wallin <mattias.wallin@stericsson.com>"); +MODULE_DESCRIPTION("AB3100 Regulator driver"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:ab3100-regulators"); diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c index 98c3a74e994..91ba9bfaa70 100644 --- a/drivers/regulator/core.c +++ b/drivers/regulator/core.c @@ -1864,6 +1864,30 @@ int regulator_notifier_call_chain(struct regulator_dev *rdev, } EXPORT_SYMBOL_GPL(regulator_notifier_call_chain); +/** + * regulator_mode_to_status - convert a regulator mode into a status + * + * @mode: Mode to convert + * + * Convert a regulator mode into a status. + */ +int regulator_mode_to_status(unsigned int mode) +{ + switch (mode) { + case REGULATOR_MODE_FAST: + return REGULATOR_STATUS_FAST; + case REGULATOR_MODE_NORMAL: + return REGULATOR_STATUS_NORMAL; + case REGULATOR_MODE_IDLE: + return REGULATOR_STATUS_IDLE; + case REGULATOR_STATUS_STANDBY: + return REGULATOR_STATUS_STANDBY; + default: + return 0; + } +} +EXPORT_SYMBOL_GPL(regulator_mode_to_status); + /* * To avoid cluttering sysfs (and memory) with useless state, only * create attributes that can be meaningfully displayed. diff --git a/drivers/regulator/mc13783.c b/drivers/regulator/mc13783.c new file mode 100644 index 00000000000..710211f6744 --- /dev/null +++ b/drivers/regulator/mc13783.c @@ -0,0 +1,410 @@ +/* + * Regulator Driver for Freescale MC13783 PMIC + * + * Copyright (C) 2008 Sascha Hauer, Pengutronix <s.hauer@pengutronix.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/mfd/mc13783-private.h> +#include <linux/regulator/machine.h> +#include <linux/regulator/driver.h> +#include <linux/platform_device.h> +#include <linux/mfd/mc13783.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/err.h> + +struct mc13783_regulator { + struct regulator_desc desc; + int reg; + int enable_bit; +}; + +static struct regulator_ops mc13783_regulator_ops; + +static struct mc13783_regulator mc13783_regulators[] = { + [MC13783_SW_SW3] = { + .desc = { + .name = "SW_SW3", + .ops = &mc13783_regulator_ops, + .type = REGULATOR_VOLTAGE, + .id = MC13783_SW_SW3, + .owner = THIS_MODULE, + }, + .reg = MC13783_REG_SWITCHERS_5, + .enable_bit = MC13783_SWCTRL_SW3_EN, + }, + [MC13783_SW_PLL] = { + .desc = { + .name = "SW_PLL", + .ops = &mc13783_regulator_ops, + .type = REGULATOR_VOLTAGE, + .id = MC13783_SW_PLL, + .owner = THIS_MODULE, + }, + .reg = MC13783_REG_SWITCHERS_4, + .enable_bit = MC13783_SWCTRL_PLL_EN, + }, + [MC13783_REGU_VAUDIO] = { + .desc = { + .name = "REGU_VAUDIO", + .ops = &mc13783_regulator_ops, + .type = REGULATOR_VOLTAGE, + .id = MC13783_REGU_VAUDIO, + .owner = THIS_MODULE, + }, + .reg = MC13783_REG_REGULATOR_MODE_0, + .enable_bit = MC13783_REGCTRL_VAUDIO_EN, + }, + [MC13783_REGU_VIOHI] = { + .desc = { + .name = "REGU_VIOHI", + .ops = &mc13783_regulator_ops, + .type = REGULATOR_VOLTAGE, + .id = MC13783_REGU_VIOHI, + .owner = THIS_MODULE, + }, + .reg = MC13783_REG_REGULATOR_MODE_0, + .enable_bit = MC13783_REGCTRL_VIOHI_EN, + }, + [MC13783_REGU_VIOLO] = { + .desc = { + .name = "REGU_VIOLO", + .ops = &mc13783_regulator_ops, + .type = REGULATOR_VOLTAGE, + .id = MC13783_REGU_VIOLO, + .owner = THIS_MODULE, + }, + .reg = MC13783_REG_REGULATOR_MODE_0, + .enable_bit = MC13783_REGCTRL_VIOLO_EN, + }, + [MC13783_REGU_VDIG] = { + .desc = { + .name = "REGU_VDIG", + .ops = &mc13783_regulator_ops, + .type = REGULATOR_VOLTAGE, + .id = MC13783_REGU_VDIG, + .owner = THIS_MODULE, + }, + .reg = MC13783_REG_REGULATOR_MODE_0, + .enable_bit = MC13783_REGCTRL_VDIG_EN, + }, + [MC13783_REGU_VGEN] = { + .desc = { + .name = "REGU_VGEN", + .ops = &mc13783_regulator_ops, + .type = REGULATOR_VOLTAGE, + .id = MC13783_REGU_VGEN, + .owner = THIS_MODULE, + }, + .reg = MC13783_REG_REGULATOR_MODE_0, + .enable_bit = MC13783_REGCTRL_VGEN_EN, + }, + [MC13783_REGU_VRFDIG] = { + .desc = { + .name = "REGU_VRFDIG", + .ops = &mc13783_regulator_ops, + .type = REGULATOR_VOLTAGE, + .id = MC13783_REGU_VRFDIG, + .owner = THIS_MODULE, + }, + .reg = MC13783_REG_REGULATOR_MODE_0, + .enable_bit = MC13783_REGCTRL_VRFDIG_EN, + }, + [MC13783_REGU_VRFREF] = { + .desc = { + .name = "REGU_VRFREF", + .ops = &mc13783_regulator_ops, + .type = REGULATOR_VOLTAGE, + .id = MC13783_REGU_VRFREF, + .owner = THIS_MODULE, + }, + .reg = MC13783_REG_REGULATOR_MODE_0, + .enable_bit = MC13783_REGCTRL_VRFREF_EN, + }, + [MC13783_REGU_VRFCP] = { + .desc = { + .name = "REGU_VRFCP", + .ops = &mc13783_regulator_ops, + .type = REGULATOR_VOLTAGE, + .id = MC13783_REGU_VRFCP, + .owner = THIS_MODULE, + }, + .reg = MC13783_REG_REGULATOR_MODE_0, + .enable_bit = MC13783_REGCTRL_VRFCP_EN, + }, + [MC13783_REGU_VSIM] = { + .desc = { + .name = "REGU_VSIM", + .ops = &mc13783_regulator_ops, + .type = REGULATOR_VOLTAGE, + .id = MC13783_REGU_VSIM, + .owner = THIS_MODULE, + }, + .reg = MC13783_REG_REGULATOR_MODE_1, + .enable_bit = MC13783_REGCTRL_VSIM_EN, + }, + [MC13783_REGU_VESIM] = { + .desc = { + .name = "REGU_VESIM", + .ops = &mc13783_regulator_ops, + .type = REGULATOR_VOLTAGE, + .id = MC13783_REGU_VESIM, + .owner = THIS_MODULE, + }, + .reg = MC13783_REG_REGULATOR_MODE_1, + .enable_bit = MC13783_REGCTRL_VESIM_EN, + }, + [MC13783_REGU_VCAM] = { + .desc = { + .name = "REGU_VCAM", + .ops = &mc13783_regulator_ops, + .type = REGULATOR_VOLTAGE, + .id = MC13783_REGU_VCAM, + .owner = THIS_MODULE, + }, + .reg = MC13783_REG_REGULATOR_MODE_1, + .enable_bit = MC13783_REGCTRL_VCAM_EN, + }, + [MC13783_REGU_VRFBG] = { + .desc = { + .name = "REGU_VRFBG", + .ops = &mc13783_regulator_ops, + .type = REGULATOR_VOLTAGE, + .id = MC13783_REGU_VRFBG, + .owner = THIS_MODULE, + }, + .reg = MC13783_REG_REGULATOR_MODE_1, + .enable_bit = MC13783_REGCTRL_VRFBG_EN, + }, + [MC13783_REGU_VVIB] = { + .desc = { + .name = "REGU_VVIB", + .ops = &mc13783_regulator_ops, + .type = REGULATOR_VOLTAGE, + .id = MC13783_REGU_VVIB, + .owner = THIS_MODULE, + }, + .reg = MC13783_REG_REGULATOR_MODE_1, + .enable_bit = MC13783_REGCTRL_VVIB_EN, + }, + [MC13783_REGU_VRF1] = { + .desc = { + .name = "REGU_VRF1", + .ops = &mc13783_regulator_ops, + .type = REGULATOR_VOLTAGE, + .id = MC13783_REGU_VRF1, + .owner = THIS_MODULE, + }, + .reg = MC13783_REG_REGULATOR_MODE_1, + .enable_bit = MC13783_REGCTRL_VRF1_EN, + }, + [MC13783_REGU_VRF2] = { + .desc = { + .name = "REGU_VRF2", + .ops = &mc13783_regulator_ops, + .type = REGULATOR_VOLTAGE, + .id = MC13783_REGU_VRF2, + .owner = THIS_MODULE, + }, + .reg = MC13783_REG_REGULATOR_MODE_1, + .enable_bit = MC13783_REGCTRL_VRF2_EN, + }, + [MC13783_REGU_VMMC1] = { + .desc = { + .name = "REGU_VMMC1", + .ops = &mc13783_regulator_ops, + .type = REGULATOR_VOLTAGE, + .id = MC13783_REGU_VMMC1, + .owner = THIS_MODULE, + }, + .reg = MC13783_REG_REGULATOR_MODE_1, + .enable_bit = MC13783_REGCTRL_VMMC1_EN, + }, + [MC13783_REGU_VMMC2] = { + .desc = { + .name = "REGU_VMMC2", + .ops = &mc13783_regulator_ops, + .type = REGULATOR_VOLTAGE, + .id = MC13783_REGU_VMMC2, + .owner = THIS_MODULE, + }, + .reg = MC13783_REG_REGULATOR_MODE_1, + .enable_bit = MC13783_REGCTRL_VMMC2_EN, + }, + [MC13783_REGU_GPO1] = { + .desc = { + .name = "REGU_GPO1", + .ops = &mc13783_regulator_ops, + .type = REGULATOR_VOLTAGE, + .id = MC13783_REGU_GPO1, + .owner = THIS_MODULE, + }, + .reg = MC13783_REG_POWER_MISCELLANEOUS, + .enable_bit = MC13783_REGCTRL_GPO1_EN, + }, + [MC13783_REGU_GPO2] = { + .desc = { + .name = "REGU_GPO2", + .ops = &mc13783_regulator_ops, + .type = REGULATOR_VOLTAGE, + .id = MC13783_REGU_GPO2, + .owner = THIS_MODULE, + }, + .reg = MC13783_REG_POWER_MISCELLANEOUS, + .enable_bit = MC13783_REGCTRL_GPO2_EN, + }, + [MC13783_REGU_GPO3] = { + .desc = { + .name = "REGU_GPO3", + .ops = &mc13783_regulator_ops, + .type = REGULATOR_VOLTAGE, + .id = MC13783_REGU_GPO3, + .owner = THIS_MODULE, + }, + .reg = MC13783_REG_POWER_MISCELLANEOUS, + .enable_bit = MC13783_REGCTRL_GPO3_EN, + }, + [MC13783_REGU_GPO4] = { + .desc = { + .name = "REGU_GPO4", + .ops = &mc13783_regulator_ops, + .type = REGULATOR_VOLTAGE, + .id = MC13783_REGU_GPO4, + .owner = THIS_MODULE, + }, + .reg = MC13783_REG_POWER_MISCELLANEOUS, + .enable_bit = MC13783_REGCTRL_GPO4_EN, + }, +}; + +struct mc13783_priv { + struct regulator_desc desc[ARRAY_SIZE(mc13783_regulators)]; + struct mc13783 *mc13783; + struct regulator_dev *regulators[0]; +}; + +static int mc13783_enable(struct regulator_dev *rdev) +{ + struct mc13783_priv *priv = rdev_get_drvdata(rdev); + int id = rdev_get_id(rdev); + + dev_dbg(rdev_get_dev(rdev), "%s id: %d\n", __func__, id); + + return mc13783_set_bits(priv->mc13783, mc13783_regulators[id].reg, + mc13783_regulators[id].enable_bit, + mc13783_regulators[id].enable_bit); +} + +static int mc13783_disable(struct regulator_dev *rdev) +{ + struct mc13783_priv *priv = rdev_get_drvdata(rdev); + int id = rdev_get_id(rdev); + + dev_dbg(rdev_get_dev(rdev), "%s id: %d\n", __func__, id); + + return mc13783_set_bits(priv->mc13783, mc13783_regulators[id].reg, + mc13783_regulators[id].enable_bit, 0); +} + +static int mc13783_is_enabled(struct regulator_dev *rdev) +{ + struct mc13783_priv *priv = rdev_get_drvdata(rdev); + int ret, id = rdev_get_id(rdev); + unsigned int val; + + ret = mc13783_reg_read(priv->mc13783, mc13783_regulators[id].reg, &val); + if (ret) + return ret; + + return (val & mc13783_regulators[id].enable_bit) != 0; +} + +static struct regulator_ops mc13783_regulator_ops = { + .enable = mc13783_enable, + .disable = mc13783_disable, + .is_enabled = mc13783_is_enabled, +}; + +static int __devinit mc13783_regulator_probe(struct platform_device *pdev) +{ + struct mc13783_priv *priv; + struct mc13783 *mc13783 = dev_get_drvdata(pdev->dev.parent); + struct mc13783_regulator_init_data *init_data; + int i, ret; + + dev_dbg(&pdev->dev, "mc13783_regulator_probe id %d\n", pdev->id); + + priv = kzalloc(sizeof(*priv) + mc13783->num_regulators * sizeof(void *), + GFP_KERNEL); + if (!priv) + return -ENOMEM; + + priv->mc13783 = mc13783; + + for (i = 0; i < mc13783->num_regulators; i++) { + init_data = &mc13783->regulators[i]; + priv->regulators[i] = regulator_register( + &mc13783_regulators[init_data->id].desc, + &pdev->dev, init_data->init_data, priv); + + if (IS_ERR(priv->regulators[i])) { + dev_err(&pdev->dev, "failed to register regulator %s\n", + mc13783_regulators[i].desc.name); + ret = PTR_ERR(priv->regulators[i]); + goto err; + } + } + + platform_set_drvdata(pdev, priv); + + return 0; +err: + while (--i >= 0) + regulator_unregister(priv->regulators[i]); + + kfree(priv); + + return ret; +} + +static int __devexit mc13783_regulator_remove(struct platform_device *pdev) +{ + struct mc13783_priv *priv = platform_get_drvdata(pdev); + struct mc13783 *mc13783 = priv->mc13783; + int i; + + for (i = 0; i < mc13783->num_regulators; i++) + regulator_unregister(priv->regulators[i]); + + return 0; +} + +static struct platform_driver mc13783_regulator_driver = { + .driver = { + .name = "mc13783-regulator", + .owner = THIS_MODULE, + }, + .remove = __devexit_p(mc13783_regulator_remove), +}; + +static int __init mc13783_regulator_init(void) +{ + return platform_driver_probe(&mc13783_regulator_driver, + mc13783_regulator_probe); +} +subsys_initcall(mc13783_regulator_init); + +static void __exit mc13783_regulator_exit(void) +{ + platform_driver_unregister(&mc13783_regulator_driver); +} +module_exit(mc13783_regulator_exit); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Sascha Hauer <s.hauer@pengutronix.de"); +MODULE_DESCRIPTION("Regulator Driver for Freescale MC13783 PMIC"); +MODULE_ALIAS("platform:mc13783-regulator"); diff --git a/drivers/regulator/pcap-regulator.c b/drivers/regulator/pcap-regulator.c new file mode 100644 index 00000000000..33d7d899e03 --- /dev/null +++ b/drivers/regulator/pcap-regulator.c @@ -0,0 +1,318 @@ +/* + * PCAP2 Regulator Driver + * + * Copyright (c) 2009 Daniel Ribeiro <drwyrm@gmail.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/err.h> +#include <linux/platform_device.h> +#include <linux/regulator/driver.h> +#include <linux/regulator/machine.h> +#include <linux/mfd/ezx-pcap.h> + +static const u16 V1_table[] = { + 2775, 1275, 1600, 1725, 1825, 1925, 2075, 2275, +}; + +static const u16 V2_table[] = { + 2500, 2775, +}; + +static const u16 V3_table[] = { + 1075, 1275, 1550, 1725, 1876, 1950, 2075, 2275, +}; + +static const u16 V4_table[] = { + 1275, 1550, 1725, 1875, 1950, 2075, 2275, 2775, +}; + +static const u16 V5_table[] = { + 1875, 2275, 2475, 2775, +}; + +static const u16 V6_table[] = { + 2475, 2775, +}; + +static const u16 V7_table[] = { + 1875, 2775, +}; + +#define V8_table V4_table + +static const u16 V9_table[] = { + 1575, 1875, 2475, 2775, +}; + +static const u16 V10_table[] = { + 5000, +}; + +static const u16 VAUX1_table[] = { + 1875, 2475, 2775, 3000, +}; + +#define VAUX2_table VAUX1_table + +static const u16 VAUX3_table[] = { + 1200, 1200, 1200, 1200, 1400, 1600, 1800, 2000, + 2200, 2400, 2600, 2800, 3000, 3200, 3400, 3600, +}; + +static const u16 VAUX4_table[] = { + 1800, 1800, 3000, 5000, +}; + +static const u16 VSIM_table[] = { + 1875, 3000, +}; + +static const u16 VSIM2_table[] = { + 1875, +}; + +static const u16 VVIB_table[] = { + 1300, 1800, 2000, 3000, +}; + +static const u16 SW1_table[] = { + 900, 950, 1000, 1050, 1100, 1150, 1200, 1250, + 1300, 1350, 1400, 1450, 1500, 1600, 1875, 2250, +}; + +#define SW2_table SW1_table + +static const u16 SW3_table[] = { + 4000, 4500, 5000, 5500, +}; + +struct pcap_regulator { + const u8 reg; + const u8 en; + const u8 index; + const u8 stby; + const u8 lowpwr; + const u8 n_voltages; + const u16 *voltage_table; +}; + +#define NA 0xff + +#define VREG_INFO(_vreg, _reg, _en, _index, _stby, _lowpwr) \ + [_vreg] = { \ + .reg = _reg, \ + .en = _en, \ + .index = _index, \ + .stby = _stby, \ + .lowpwr = _lowpwr, \ + .n_voltages = ARRAY_SIZE(_vreg##_table), \ + .voltage_table = _vreg##_table, \ + } + +static struct pcap_regulator vreg_table[] = { + VREG_INFO(V1, PCAP_REG_VREG1, 1, 2, 18, 0), + VREG_INFO(V2, PCAP_REG_VREG1, 5, 6, 19, 22), + VREG_INFO(V3, PCAP_REG_VREG1, 7, 8, 20, 23), + VREG_INFO(V4, PCAP_REG_VREG1, 11, 12, 21, 24), + /* V5 STBY and LOWPWR are on PCAP_REG_VREG2 */ + VREG_INFO(V5, PCAP_REG_VREG1, 15, 16, 12, 19), + + VREG_INFO(V6, PCAP_REG_VREG2, 1, 2, 14, 20), + VREG_INFO(V7, PCAP_REG_VREG2, 3, 4, 15, 21), + VREG_INFO(V8, PCAP_REG_VREG2, 5, 6, 16, 22), + VREG_INFO(V9, PCAP_REG_VREG2, 9, 10, 17, 23), + VREG_INFO(V10, PCAP_REG_VREG2, 10, NA, 18, 24), + + VREG_INFO(VAUX1, PCAP_REG_AUXVREG, 1, 2, 22, 23), + /* VAUX2 ... VSIM2 STBY and LOWPWR are on PCAP_REG_LOWPWR */ + VREG_INFO(VAUX2, PCAP_REG_AUXVREG, 4, 5, 0, 1), + VREG_INFO(VAUX3, PCAP_REG_AUXVREG, 7, 8, 2, 3), + VREG_INFO(VAUX4, PCAP_REG_AUXVREG, 12, 13, 4, 5), + VREG_INFO(VSIM, PCAP_REG_AUXVREG, 17, 18, NA, 6), + VREG_INFO(VSIM2, PCAP_REG_AUXVREG, 16, NA, NA, 7), + VREG_INFO(VVIB, PCAP_REG_AUXVREG, 19, 20, NA, NA), + + VREG_INFO(SW1, PCAP_REG_SWCTRL, 1, 2, NA, NA), + VREG_INFO(SW2, PCAP_REG_SWCTRL, 6, 7, NA, NA), + /* SW3 STBY is on PCAP_REG_AUXVREG */ + VREG_INFO(SW3, PCAP_REG_SWCTRL, 11, 12, 24, NA), + + /* SWxS used to control SWx voltage on standby */ +/* VREG_INFO(SW1S, PCAP_REG_LOWPWR, NA, 12, NA, NA), + VREG_INFO(SW2S, PCAP_REG_LOWPWR, NA, 20, NA, NA), */ +}; + +static int pcap_regulator_set_voltage(struct regulator_dev *rdev, + int min_uV, int max_uV) +{ + struct pcap_regulator *vreg = &vreg_table[rdev_get_id(rdev)]; + void *pcap = rdev_get_drvdata(rdev); + int uV; + u8 i; + + /* the regulator doesn't support voltage switching */ + if (vreg->n_voltages == 1) + return -EINVAL; + + for (i = 0; i < vreg->n_voltages; i++) { + /* For V1 the first is not the best match */ + if (i == 0 && rdev_get_id(rdev) == V1) + i = 1; + else if (i + 1 == vreg->n_voltages && rdev_get_id(rdev) == V1) + i = 0; + + uV = vreg->voltage_table[i] * 1000; + if (min_uV <= uV && uV <= max_uV) + return ezx_pcap_set_bits(pcap, vreg->reg, + (vreg->n_voltages - 1) << vreg->index, + i << vreg->index); + + if (i == 0 && rdev_get_id(rdev) == V1) + i = vreg->n_voltages - 1; + } + + /* the requested voltage range is not supported by this regulator */ + return -EINVAL; +} + +static int pcap_regulator_get_voltage(struct regulator_dev *rdev) +{ + struct pcap_regulator *vreg = &vreg_table[rdev_get_id(rdev)]; + void *pcap = rdev_get_drvdata(rdev); + u32 tmp; + int mV; + + if (vreg->n_voltages == 1) + return vreg->voltage_table[0] * 1000; + + ezx_pcap_read(pcap, vreg->reg, &tmp); + tmp = ((tmp >> vreg->index) & (vreg->n_voltages - 1)); + mV = vreg->voltage_table[tmp]; + + return mV * 1000; +} + +static int pcap_regulator_enable(struct regulator_dev *rdev) +{ + struct pcap_regulator *vreg = &vreg_table[rdev_get_id(rdev)]; + void *pcap = rdev_get_drvdata(rdev); + + if (vreg->en == NA) + return -EINVAL; + + return ezx_pcap_set_bits(pcap, vreg->reg, 1 << vreg->en, 1 << vreg->en); +} + +static int pcap_regulator_disable(struct regulator_dev *rdev) +{ + struct pcap_regulator *vreg = &vreg_table[rdev_get_id(rdev)]; + void *pcap = rdev_get_drvdata(rdev); + + if (vreg->en == NA) + return -EINVAL; + + return ezx_pcap_set_bits(pcap, vreg->reg, 1 << vreg->en, 0); +} + +static int pcap_regulator_is_enabled(struct regulator_dev *rdev) +{ + struct pcap_regulator *vreg = &vreg_table[rdev_get_id(rdev)]; + void *pcap = rdev_get_drvdata(rdev); + u32 tmp; + + if (vreg->en == NA) + return -EINVAL; + + ezx_pcap_read(pcap, vreg->reg, &tmp); + return (tmp >> vreg->en) & 1; +} + +static int pcap_regulator_list_voltage(struct regulator_dev *rdev, + unsigned int index) +{ + struct pcap_regulator *vreg = &vreg_table[rdev_get_id(rdev)]; + + return vreg->voltage_table[index] * 1000; +} + +static struct regulator_ops pcap_regulator_ops = { + .list_voltage = pcap_regulator_list_voltage, + .set_voltage = pcap_regulator_set_voltage, + .get_voltage = pcap_regulator_get_voltage, + .enable = pcap_regulator_enable, + .disable = pcap_regulator_disable, + .is_enabled = pcap_regulator_is_enabled, +}; + +#define VREG(_vreg) \ + [_vreg] = { \ + .name = #_vreg, \ + .id = _vreg, \ + .n_voltages = ARRAY_SIZE(_vreg##_table), \ + .ops = &pcap_regulator_ops, \ + .type = REGULATOR_VOLTAGE, \ + .owner = THIS_MODULE, \ + } + +static struct regulator_desc pcap_regulators[] = { + VREG(V1), VREG(V2), VREG(V3), VREG(V4), VREG(V5), VREG(V6), VREG(V7), + VREG(V8), VREG(V9), VREG(V10), VREG(VAUX1), VREG(VAUX2), VREG(VAUX3), + VREG(VAUX4), VREG(VSIM), VREG(VSIM2), VREG(VVIB), VREG(SW1), VREG(SW2), +}; + +static int __devinit pcap_regulator_probe(struct platform_device *pdev) +{ + struct regulator_dev *rdev; + void *pcap = dev_get_drvdata(pdev->dev.parent); + + rdev = regulator_register(&pcap_regulators[pdev->id], &pdev->dev, + pdev->dev.platform_data, pcap); + if (IS_ERR(rdev)) + return PTR_ERR(rdev); + + platform_set_drvdata(pdev, rdev); + + return 0; +} + +static int __devexit pcap_regulator_remove(struct platform_device *pdev) +{ + struct regulator_dev *rdev = platform_get_drvdata(pdev); + + regulator_unregister(rdev); + + return 0; +} + +static struct platform_driver pcap_regulator_driver = { + .driver = { + .name = "pcap-regulator", + }, + .probe = pcap_regulator_probe, + .remove = __devexit_p(pcap_regulator_remove), +}; + +static int __init pcap_regulator_init(void) +{ + return platform_driver_register(&pcap_regulator_driver); +} + +static void __exit pcap_regulator_exit(void) +{ + platform_driver_unregister(&pcap_regulator_driver); +} + +subsys_initcall(pcap_regulator_init); +module_exit(pcap_regulator_exit); + +MODULE_AUTHOR("Daniel Ribeiro <drwyrm@gmail.com>"); +MODULE_DESCRIPTION("PCAP2 Regulator Driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/regulator/wm831x-dcdc.c b/drivers/regulator/wm831x-dcdc.c new file mode 100644 index 00000000000..2eefc1a0cf0 --- /dev/null +++ b/drivers/regulator/wm831x-dcdc.c @@ -0,0 +1,862 @@ +/* + * wm831x-dcdc.c -- DC-DC buck convertor driver for the WM831x series + * + * Copyright 2009 Wolfson Microelectronics PLC. + * + * Author: Mark Brown <broonie@opensource.wolfsonmicro.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/init.h> +#include <linux/bitops.h> +#include <linux/err.h> +#include <linux/i2c.h> +#include <linux/platform_device.h> +#include <linux/regulator/driver.h> + +#include <linux/mfd/wm831x/core.h> +#include <linux/mfd/wm831x/regulator.h> +#include <linux/mfd/wm831x/pdata.h> + +#define WM831X_BUCKV_MAX_SELECTOR 0x68 +#define WM831X_BUCKP_MAX_SELECTOR 0x66 + +#define WM831X_DCDC_MODE_FAST 0 +#define WM831X_DCDC_MODE_NORMAL 1 +#define WM831X_DCDC_MODE_IDLE 2 +#define WM831X_DCDC_MODE_STANDBY 3 + +#define WM831X_DCDC_MAX_NAME 6 + +/* Register offsets in control block */ +#define WM831X_DCDC_CONTROL_1 0 +#define WM831X_DCDC_CONTROL_2 1 +#define WM831X_DCDC_ON_CONFIG 2 +#define WM831X_DCDC_SLEEP_CONTROL 3 + +/* + * Shared + */ + +struct wm831x_dcdc { + char name[WM831X_DCDC_MAX_NAME]; + struct regulator_desc desc; + int base; + struct wm831x *wm831x; + struct regulator_dev *regulator; +}; + +static int wm831x_dcdc_is_enabled(struct regulator_dev *rdev) +{ + struct wm831x_dcdc *dcdc = rdev_get_drvdata(rdev); + struct wm831x *wm831x = dcdc->wm831x; + int mask = 1 << rdev_get_id(rdev); + int reg; + + reg = wm831x_reg_read(wm831x, WM831X_DCDC_ENABLE); + if (reg < 0) + return reg; + + if (reg & mask) + return 1; + else + return 0; +} + +static int wm831x_dcdc_enable(struct regulator_dev *rdev) +{ + struct wm831x_dcdc *dcdc = rdev_get_drvdata(rdev); + struct wm831x *wm831x = dcdc->wm831x; + int mask = 1 << rdev_get_id(rdev); + + return wm831x_set_bits(wm831x, WM831X_DCDC_ENABLE, mask, mask); +} + +static int wm831x_dcdc_disable(struct regulator_dev *rdev) +{ + struct wm831x_dcdc *dcdc = rdev_get_drvdata(rdev); + struct wm831x *wm831x = dcdc->wm831x; + int mask = 1 << rdev_get_id(rdev); + + return wm831x_set_bits(wm831x, WM831X_DCDC_ENABLE, mask, 0); +} + +static unsigned int wm831x_dcdc_get_mode(struct regulator_dev *rdev) + +{ + struct wm831x_dcdc *dcdc = rdev_get_drvdata(rdev); + struct wm831x *wm831x = dcdc->wm831x; + u16 reg = dcdc->base + WM831X_DCDC_ON_CONFIG; + int val; + + val = wm831x_reg_read(wm831x, reg); + if (val < 0) + return val; + + val = (val & WM831X_DC1_ON_MODE_MASK) >> WM831X_DC1_ON_MODE_SHIFT; + + switch (val) { + case WM831X_DCDC_MODE_FAST: + return REGULATOR_MODE_FAST; + case WM831X_DCDC_MODE_NORMAL: + return REGULATOR_MODE_NORMAL; + case WM831X_DCDC_MODE_STANDBY: + return REGULATOR_MODE_STANDBY; + case WM831X_DCDC_MODE_IDLE: + return REGULATOR_MODE_IDLE; + default: + BUG(); + } +} + +static int wm831x_dcdc_set_mode_int(struct wm831x *wm831x, int reg, + unsigned int mode) +{ + int val; + + switch (mode) { + case REGULATOR_MODE_FAST: + val = WM831X_DCDC_MODE_FAST; + break; + case REGULATOR_MODE_NORMAL: + val = WM831X_DCDC_MODE_NORMAL; + break; + case REGULATOR_MODE_STANDBY: + val = WM831X_DCDC_MODE_STANDBY; + break; + case REGULATOR_MODE_IDLE: + val = WM831X_DCDC_MODE_IDLE; + break; + default: + return -EINVAL; + } + + return wm831x_set_bits(wm831x, reg, WM831X_DC1_ON_MODE_MASK, + val << WM831X_DC1_ON_MODE_SHIFT); +} + +static int wm831x_dcdc_set_mode(struct regulator_dev *rdev, unsigned int mode) +{ + struct wm831x_dcdc *dcdc = rdev_get_drvdata(rdev); + struct wm831x *wm831x = dcdc->wm831x; + u16 reg = dcdc->base + WM831X_DCDC_ON_CONFIG; + + return wm831x_dcdc_set_mode_int(wm831x, reg, mode); +} + +static int wm831x_dcdc_set_suspend_mode(struct regulator_dev *rdev, + unsigned int mode) +{ + struct wm831x_dcdc *dcdc = rdev_get_drvdata(rdev); + struct wm831x *wm831x = dcdc->wm831x; + u16 reg = dcdc->base + WM831X_DCDC_SLEEP_CONTROL; + + return wm831x_dcdc_set_mode_int(wm831x, reg, mode); +} + +static int wm831x_dcdc_get_status(struct regulator_dev *rdev) +{ + struct wm831x_dcdc *dcdc = rdev_get_drvdata(rdev); + struct wm831x *wm831x = dcdc->wm831x; + int ret; + + /* First, check for errors */ + ret = wm831x_reg_read(wm831x, WM831X_DCDC_UV_STATUS); + if (ret < 0) + return ret; + + if (ret & (1 << rdev_get_id(rdev))) { + dev_dbg(wm831x->dev, "DCDC%d under voltage\n", + rdev_get_id(rdev) + 1); + return REGULATOR_STATUS_ERROR; + } + + /* DCDC1 and DCDC2 can additionally detect high voltage/current */ + if (rdev_get_id(rdev) < 2) { + if (ret & (WM831X_DC1_OV_STS << rdev_get_id(rdev))) { + dev_dbg(wm831x->dev, "DCDC%d over voltage\n", + rdev_get_id(rdev) + 1); + return REGULATOR_STATUS_ERROR; + } + + if (ret & (WM831X_DC1_HC_STS << rdev_get_id(rdev))) { + dev_dbg(wm831x->dev, "DCDC%d over current\n", + rdev_get_id(rdev) + 1); + return REGULATOR_STATUS_ERROR; + } + } + + /* Is the regulator on? */ + ret = wm831x_reg_read(wm831x, WM831X_DCDC_STATUS); + if (ret < 0) + return ret; + if (!(ret & (1 << rdev_get_id(rdev)))) + return REGULATOR_STATUS_OFF; + + /* TODO: When we handle hardware control modes so we can report the + * current mode. */ + return REGULATOR_STATUS_ON; +} + +static irqreturn_t wm831x_dcdc_uv_irq(int irq, void *data) +{ + struct wm831x_dcdc *dcdc = data; + + regulator_notifier_call_chain(dcdc->regulator, + REGULATOR_EVENT_UNDER_VOLTAGE, + NULL); + + return IRQ_HANDLED; +} + +static irqreturn_t wm831x_dcdc_oc_irq(int irq, void *data) +{ + struct wm831x_dcdc *dcdc = data; + + regulator_notifier_call_chain(dcdc->regulator, + REGULATOR_EVENT_OVER_CURRENT, + NULL); + + return IRQ_HANDLED; +} + +/* + * BUCKV specifics + */ + +static int wm831x_buckv_list_voltage(struct regulator_dev *rdev, + unsigned selector) +{ + if (selector <= 0x8) + return 600000; + if (selector <= WM831X_BUCKV_MAX_SELECTOR) + return 600000 + ((selector - 0x8) * 12500); + return -EINVAL; +} + +static int wm831x_buckv_set_voltage_int(struct regulator_dev *rdev, int reg, + int min_uV, int max_uV) +{ + struct wm831x_dcdc *dcdc = rdev_get_drvdata(rdev); + struct wm831x *wm831x = dcdc->wm831x; + u16 vsel; + + if (min_uV < 600000) + vsel = 0; + else if (min_uV <= 1800000) + vsel = ((min_uV - 600000) / 12500) + 8; + else + return -EINVAL; + + if (wm831x_buckv_list_voltage(rdev, vsel) > max_uV) + return -EINVAL; + + return wm831x_set_bits(wm831x, reg, WM831X_DC1_ON_VSEL_MASK, vsel); +} + +static int wm831x_buckv_set_voltage(struct regulator_dev *rdev, + int min_uV, int max_uV) +{ + struct wm831x_dcdc *dcdc = rdev_get_drvdata(rdev); + u16 reg = dcdc->base + WM831X_DCDC_ON_CONFIG; + + return wm831x_buckv_set_voltage_int(rdev, reg, min_uV, max_uV); +} + +static int wm831x_buckv_set_suspend_voltage(struct regulator_dev *rdev, + int uV) +{ + struct wm831x_dcdc *dcdc = rdev_get_drvdata(rdev); + u16 reg = dcdc->base + WM831X_DCDC_SLEEP_CONTROL; + + return wm831x_buckv_set_voltage_int(rdev, reg, uV, uV); +} + +static int wm831x_buckv_get_voltage(struct regulator_dev *rdev) +{ + struct wm831x_dcdc *dcdc = rdev_get_drvdata(rdev); + struct wm831x *wm831x = dcdc->wm831x; + u16 reg = dcdc->base + WM831X_DCDC_ON_CONFIG; + int val; + + val = wm831x_reg_read(wm831x, reg); + if (val < 0) + return val; + + return wm831x_buckv_list_voltage(rdev, val & WM831X_DC1_ON_VSEL_MASK); +} + +/* Current limit options */ +static u16 wm831x_dcdc_ilim[] = { + 125, 250, 375, 500, 625, 750, 875, 1000 +}; + +static int wm831x_buckv_set_current_limit(struct regulator_dev *rdev, + int min_uA, int max_uA) +{ + struct wm831x_dcdc *dcdc = rdev_get_drvdata(rdev); + struct wm831x *wm831x = dcdc->wm831x; + u16 reg = dcdc->base + WM831X_DCDC_CONTROL_2; + int i; + + for (i = 0; i < ARRAY_SIZE(wm831x_dcdc_ilim); i++) { + if (max_uA <= wm831x_dcdc_ilim[i]) + break; + } + if (i == ARRAY_SIZE(wm831x_dcdc_ilim)) + return -EINVAL; + + return wm831x_set_bits(wm831x, reg, WM831X_DC1_HC_THR_MASK, i); +} + +static int wm831x_buckv_get_current_limit(struct regulator_dev *rdev) +{ + struct wm831x_dcdc *dcdc = rdev_get_drvdata(rdev); + struct wm831x *wm831x = dcdc->wm831x; + u16 reg = dcdc->base + WM831X_DCDC_CONTROL_2; + int val; + + val = wm831x_reg_read(wm831x, reg); + if (val < 0) + return val; + + return wm831x_dcdc_ilim[val & WM831X_DC1_HC_THR_MASK]; +} + +static struct regulator_ops wm831x_buckv_ops = { + .set_voltage = wm831x_buckv_set_voltage, + .get_voltage = wm831x_buckv_get_voltage, + .list_voltage = wm831x_buckv_list_voltage, + .set_suspend_voltage = wm831x_buckv_set_suspend_voltage, + .set_current_limit = wm831x_buckv_set_current_limit, + .get_current_limit = wm831x_buckv_get_current_limit, + + .is_enabled = wm831x_dcdc_is_enabled, + .enable = wm831x_dcdc_enable, + .disable = wm831x_dcdc_disable, + .get_status = wm831x_dcdc_get_status, + .get_mode = wm831x_dcdc_get_mode, + .set_mode = wm831x_dcdc_set_mode, + .set_suspend_mode = wm831x_dcdc_set_suspend_mode, +}; + +static __devinit int wm831x_buckv_probe(struct platform_device *pdev) +{ + struct wm831x *wm831x = dev_get_drvdata(pdev->dev.parent); + struct wm831x_pdata *pdata = wm831x->dev->platform_data; + int id = pdev->id % ARRAY_SIZE(pdata->dcdc); + struct wm831x_dcdc *dcdc; + struct resource *res; + int ret, irq; + + dev_dbg(&pdev->dev, "Probing DCDC%d\n", id + 1); + + if (pdata == NULL || pdata->dcdc[id] == NULL) + return -ENODEV; + + dcdc = kzalloc(sizeof(struct wm831x_dcdc), GFP_KERNEL); + if (dcdc == NULL) { + dev_err(&pdev->dev, "Unable to allocate private data\n"); + return -ENOMEM; + } + + dcdc->wm831x = wm831x; + + res = platform_get_resource(pdev, IORESOURCE_IO, 0); + if (res == NULL) { + dev_err(&pdev->dev, "No I/O resource\n"); + ret = -EINVAL; + goto err; + } + dcdc->base = res->start; + + snprintf(dcdc->name, sizeof(dcdc->name), "DCDC%d", id + 1); + dcdc->desc.name = dcdc->name; + dcdc->desc.id = id; + dcdc->desc.type = REGULATOR_VOLTAGE; + dcdc->desc.n_voltages = WM831X_BUCKV_MAX_SELECTOR + 1; + dcdc->desc.ops = &wm831x_buckv_ops; + dcdc->desc.owner = THIS_MODULE; + + dcdc->regulator = regulator_register(&dcdc->desc, &pdev->dev, + pdata->dcdc[id], dcdc); + if (IS_ERR(dcdc->regulator)) { + ret = PTR_ERR(dcdc->regulator); + dev_err(wm831x->dev, "Failed to register DCDC%d: %d\n", + id + 1, ret); + goto err; + } + + irq = platform_get_irq_byname(pdev, "UV"); + ret = wm831x_request_irq(wm831x, irq, wm831x_dcdc_uv_irq, + IRQF_TRIGGER_RISING, dcdc->name, + dcdc); + if (ret != 0) { + dev_err(&pdev->dev, "Failed to request UV IRQ %d: %d\n", + irq, ret); + goto err_regulator; + } + + irq = platform_get_irq_byname(pdev, "HC"); + ret = wm831x_request_irq(wm831x, irq, wm831x_dcdc_oc_irq, + IRQF_TRIGGER_RISING, dcdc->name, + dcdc); + if (ret != 0) { + dev_err(&pdev->dev, "Failed to request HC IRQ %d: %d\n", + irq, ret); + goto err_uv; + } + + platform_set_drvdata(pdev, dcdc); + + return 0; + +err_uv: + wm831x_free_irq(wm831x, platform_get_irq_byname(pdev, "UV"), dcdc); +err_regulator: + regulator_unregister(dcdc->regulator); +err: + kfree(dcdc); + return ret; +} + +static __devexit int wm831x_buckv_remove(struct platform_device *pdev) +{ + struct wm831x_dcdc *dcdc = platform_get_drvdata(pdev); + struct wm831x *wm831x = dcdc->wm831x; + + wm831x_free_irq(wm831x, platform_get_irq_byname(pdev, "HC"), dcdc); + wm831x_free_irq(wm831x, platform_get_irq_byname(pdev, "UV"), dcdc); + regulator_unregister(dcdc->regulator); + kfree(dcdc); + + return 0; +} + +static struct platform_driver wm831x_buckv_driver = { + .probe = wm831x_buckv_probe, + .remove = __devexit_p(wm831x_buckv_remove), + .driver = { + .name = "wm831x-buckv", + }, +}; + +/* + * BUCKP specifics + */ + +static int wm831x_buckp_list_voltage(struct regulator_dev *rdev, + unsigned selector) +{ + if (selector <= WM831X_BUCKP_MAX_SELECTOR) + return 850000 + (selector * 25000); + else + return -EINVAL; +} + +static int wm831x_buckp_set_voltage_int(struct regulator_dev *rdev, int reg, + int min_uV, int max_uV) +{ + struct wm831x_dcdc *dcdc = rdev_get_drvdata(rdev); + struct wm831x *wm831x = dcdc->wm831x; + u16 vsel; + + if (min_uV <= 34000000) + vsel = (min_uV - 850000) / 25000; + else + return -EINVAL; + + if (wm831x_buckp_list_voltage(rdev, vsel) > max_uV) + return -EINVAL; + + return wm831x_set_bits(wm831x, reg, WM831X_DC3_ON_VSEL_MASK, vsel); +} + +static int wm831x_buckp_set_voltage(struct regulator_dev *rdev, + int min_uV, int max_uV) +{ + struct wm831x_dcdc *dcdc = rdev_get_drvdata(rdev); + u16 reg = dcdc->base + WM831X_DCDC_ON_CONFIG; + + return wm831x_buckp_set_voltage_int(rdev, reg, min_uV, max_uV); +} + +static int wm831x_buckp_set_suspend_voltage(struct regulator_dev *rdev, + int uV) +{ + struct wm831x_dcdc *dcdc = rdev_get_drvdata(rdev); + u16 reg = dcdc->base + WM831X_DCDC_SLEEP_CONTROL; + + return wm831x_buckp_set_voltage_int(rdev, reg, uV, uV); +} + +static int wm831x_buckp_get_voltage(struct regulator_dev *rdev) +{ + struct wm831x_dcdc *dcdc = rdev_get_drvdata(rdev); + struct wm831x *wm831x = dcdc->wm831x; + u16 reg = dcdc->base + WM831X_DCDC_ON_CONFIG; + int val; + + val = wm831x_reg_read(wm831x, reg); + if (val < 0) + return val; + + return wm831x_buckp_list_voltage(rdev, val & WM831X_DC3_ON_VSEL_MASK); +} + +static struct regulator_ops wm831x_buckp_ops = { + .set_voltage = wm831x_buckp_set_voltage, + .get_voltage = wm831x_buckp_get_voltage, + .list_voltage = wm831x_buckp_list_voltage, + .set_suspend_voltage = wm831x_buckp_set_suspend_voltage, + + .is_enabled = wm831x_dcdc_is_enabled, + .enable = wm831x_dcdc_enable, + .disable = wm831x_dcdc_disable, + .get_status = wm831x_dcdc_get_status, + .get_mode = wm831x_dcdc_get_mode, + .set_mode = wm831x_dcdc_set_mode, + .set_suspend_mode = wm831x_dcdc_set_suspend_mode, +}; + +static __devinit int wm831x_buckp_probe(struct platform_device *pdev) +{ + struct wm831x *wm831x = dev_get_drvdata(pdev->dev.parent); + struct wm831x_pdata *pdata = wm831x->dev->platform_data; + int id = pdev->id % ARRAY_SIZE(pdata->dcdc); + struct wm831x_dcdc *dcdc; + struct resource *res; + int ret, irq; + + dev_dbg(&pdev->dev, "Probing DCDC%d\n", id + 1); + + if (pdata == NULL || pdata->dcdc[id] == NULL) + return -ENODEV; + + dcdc = kzalloc(sizeof(struct wm831x_dcdc), GFP_KERNEL); + if (dcdc == NULL) { + dev_err(&pdev->dev, "Unable to allocate private data\n"); + return -ENOMEM; + } + + dcdc->wm831x = wm831x; + + res = platform_get_resource(pdev, IORESOURCE_IO, 0); + if (res == NULL) { + dev_err(&pdev->dev, "No I/O resource\n"); + ret = -EINVAL; + goto err; + } + dcdc->base = res->start; + + snprintf(dcdc->name, sizeof(dcdc->name), "DCDC%d", id + 1); + dcdc->desc.name = dcdc->name; + dcdc->desc.id = id; + dcdc->desc.type = REGULATOR_VOLTAGE; + dcdc->desc.n_voltages = WM831X_BUCKP_MAX_SELECTOR + 1; + dcdc->desc.ops = &wm831x_buckp_ops; + dcdc->desc.owner = THIS_MODULE; + + dcdc->regulator = regulator_register(&dcdc->desc, &pdev->dev, + pdata->dcdc[id], dcdc); + if (IS_ERR(dcdc->regulator)) { + ret = PTR_ERR(dcdc->regulator); + dev_err(wm831x->dev, "Failed to register DCDC%d: %d\n", + id + 1, ret); + goto err; + } + + irq = platform_get_irq_byname(pdev, "UV"); + ret = wm831x_request_irq(wm831x, irq, wm831x_dcdc_uv_irq, + IRQF_TRIGGER_RISING, dcdc->name, + dcdc); + if (ret != 0) { + dev_err(&pdev->dev, "Failed to request UV IRQ %d: %d\n", + irq, ret); + goto err_regulator; + } + + platform_set_drvdata(pdev, dcdc); + + return 0; + +err_regulator: + regulator_unregister(dcdc->regulator); +err: + kfree(dcdc); + return ret; +} + +static __devexit int wm831x_buckp_remove(struct platform_device *pdev) +{ + struct wm831x_dcdc *dcdc = platform_get_drvdata(pdev); + struct wm831x *wm831x = dcdc->wm831x; + + wm831x_free_irq(wm831x, platform_get_irq_byname(pdev, "UV"), dcdc); + regulator_unregister(dcdc->regulator); + kfree(dcdc); + + return 0; +} + +static struct platform_driver wm831x_buckp_driver = { + .probe = wm831x_buckp_probe, + .remove = __devexit_p(wm831x_buckp_remove), + .driver = { + .name = "wm831x-buckp", + }, +}; + +/* + * DCDC boost convertors + */ + +static int wm831x_boostp_get_status(struct regulator_dev *rdev) +{ + struct wm831x_dcdc *dcdc = rdev_get_drvdata(rdev); + struct wm831x *wm831x = dcdc->wm831x; + int ret; + + /* First, check for errors */ + ret = wm831x_reg_read(wm831x, WM831X_DCDC_UV_STATUS); + if (ret < 0) + return ret; + + if (ret & (1 << rdev_get_id(rdev))) { + dev_dbg(wm831x->dev, "DCDC%d under voltage\n", + rdev_get_id(rdev) + 1); + return REGULATOR_STATUS_ERROR; + } + + /* Is the regulator on? */ + ret = wm831x_reg_read(wm831x, WM831X_DCDC_STATUS); + if (ret < 0) + return ret; + if (ret & (1 << rdev_get_id(rdev))) + return REGULATOR_STATUS_ON; + else + return REGULATOR_STATUS_OFF; +} + +static struct regulator_ops wm831x_boostp_ops = { + .get_status = wm831x_boostp_get_status, + + .is_enabled = wm831x_dcdc_is_enabled, + .enable = wm831x_dcdc_enable, + .disable = wm831x_dcdc_disable, +}; + +static __devinit int wm831x_boostp_probe(struct platform_device *pdev) +{ + struct wm831x *wm831x = dev_get_drvdata(pdev->dev.parent); + struct wm831x_pdata *pdata = wm831x->dev->platform_data; + int id = pdev->id % ARRAY_SIZE(pdata->dcdc); + struct wm831x_dcdc *dcdc; + struct resource *res; + int ret, irq; + + dev_dbg(&pdev->dev, "Probing DCDC%d\n", id + 1); + + if (pdata == NULL || pdata->dcdc[id] == NULL) + return -ENODEV; + + dcdc = kzalloc(sizeof(struct wm831x_dcdc), GFP_KERNEL); + if (dcdc == NULL) { + dev_err(&pdev->dev, "Unable to allocate private data\n"); + return -ENOMEM; + } + + dcdc->wm831x = wm831x; + + res = platform_get_resource(pdev, IORESOURCE_IO, 0); + if (res == NULL) { + dev_err(&pdev->dev, "No I/O resource\n"); + ret = -EINVAL; + goto err; + } + dcdc->base = res->start; + + snprintf(dcdc->name, sizeof(dcdc->name), "DCDC%d", id + 1); + dcdc->desc.name = dcdc->name; + dcdc->desc.id = id; + dcdc->desc.type = REGULATOR_VOLTAGE; + dcdc->desc.ops = &wm831x_boostp_ops; + dcdc->desc.owner = THIS_MODULE; + + dcdc->regulator = regulator_register(&dcdc->desc, &pdev->dev, + pdata->dcdc[id], dcdc); + if (IS_ERR(dcdc->regulator)) { + ret = PTR_ERR(dcdc->regulator); + dev_err(wm831x->dev, "Failed to register DCDC%d: %d\n", + id + 1, ret); + goto err; + } + + irq = platform_get_irq_byname(pdev, "UV"); + ret = wm831x_request_irq(wm831x, irq, wm831x_dcdc_uv_irq, + IRQF_TRIGGER_RISING, dcdc->name, + dcdc); + if (ret != 0) { + dev_err(&pdev->dev, "Failed to request UV IRQ %d: %d\n", + irq, ret); + goto err_regulator; + } + + platform_set_drvdata(pdev, dcdc); + + return 0; + +err_regulator: + regulator_unregister(dcdc->regulator); +err: + kfree(dcdc); + return ret; +} + +static __devexit int wm831x_boostp_remove(struct platform_device *pdev) +{ + struct wm831x_dcdc *dcdc = platform_get_drvdata(pdev); + struct wm831x *wm831x = dcdc->wm831x; + + wm831x_free_irq(wm831x, platform_get_irq_byname(pdev, "UV"), dcdc); + regulator_unregister(dcdc->regulator); + kfree(dcdc); + + return 0; +} + +static struct platform_driver wm831x_boostp_driver = { + .probe = wm831x_boostp_probe, + .remove = __devexit_p(wm831x_boostp_remove), + .driver = { + .name = "wm831x-boostp", + }, +}; + +/* + * External Power Enable + * + * These aren't actually DCDCs but look like them in hardware so share + * code. + */ + +#define WM831X_EPE_BASE 6 + +static struct regulator_ops wm831x_epe_ops = { + .is_enabled = wm831x_dcdc_is_enabled, + .enable = wm831x_dcdc_enable, + .disable = wm831x_dcdc_disable, + .get_status = wm831x_dcdc_get_status, +}; + +static __devinit int wm831x_epe_probe(struct platform_device *pdev) +{ + struct wm831x *wm831x = dev_get_drvdata(pdev->dev.parent); + struct wm831x_pdata *pdata = wm831x->dev->platform_data; + int id = pdev->id % ARRAY_SIZE(pdata->epe); + struct wm831x_dcdc *dcdc; + int ret; + + dev_dbg(&pdev->dev, "Probing EPE%d\n", id + 1); + + if (pdata == NULL || pdata->epe[id] == NULL) + return -ENODEV; + + dcdc = kzalloc(sizeof(struct wm831x_dcdc), GFP_KERNEL); + if (dcdc == NULL) { + dev_err(&pdev->dev, "Unable to allocate private data\n"); + return -ENOMEM; + } + + dcdc->wm831x = wm831x; + + /* For current parts this is correct; probably need to revisit + * in future. + */ + snprintf(dcdc->name, sizeof(dcdc->name), "EPE%d", id + 1); + dcdc->desc.name = dcdc->name; + dcdc->desc.id = id + WM831X_EPE_BASE; /* Offset in DCDC registers */ + dcdc->desc.ops = &wm831x_epe_ops; + dcdc->desc.type = REGULATOR_VOLTAGE; + dcdc->desc.owner = THIS_MODULE; + + dcdc->regulator = regulator_register(&dcdc->desc, &pdev->dev, + pdata->epe[id], dcdc); + if (IS_ERR(dcdc->regulator)) { + ret = PTR_ERR(dcdc->regulator); + dev_err(wm831x->dev, "Failed to register EPE%d: %d\n", + id + 1, ret); + goto err; + } + + platform_set_drvdata(pdev, dcdc); + + return 0; + +err: + kfree(dcdc); + return ret; +} + +static __devexit int wm831x_epe_remove(struct platform_device *pdev) +{ + struct wm831x_dcdc *dcdc = platform_get_drvdata(pdev); + + regulator_unregister(dcdc->regulator); + kfree(dcdc); + + return 0; +} + +static struct platform_driver wm831x_epe_driver = { + .probe = wm831x_epe_probe, + .remove = __devexit_p(wm831x_epe_remove), + .driver = { + .name = "wm831x-epe", + }, +}; + +static int __init wm831x_dcdc_init(void) +{ + int ret; + ret = platform_driver_register(&wm831x_buckv_driver); + if (ret != 0) + pr_err("Failed to register WM831x BUCKV driver: %d\n", ret); + + ret = platform_driver_register(&wm831x_buckp_driver); + if (ret != 0) + pr_err("Failed to register WM831x BUCKP driver: %d\n", ret); + + ret = platform_driver_register(&wm831x_boostp_driver); + if (ret != 0) + pr_err("Failed to register WM831x BOOST driver: %d\n", ret); + + ret = platform_driver_register(&wm831x_epe_driver); + if (ret != 0) + pr_err("Failed to register WM831x EPE driver: %d\n", ret); + + return 0; +} +subsys_initcall(wm831x_dcdc_init); + +static void __exit wm831x_dcdc_exit(void) +{ + platform_driver_unregister(&wm831x_epe_driver); + platform_driver_unregister(&wm831x_boostp_driver); + platform_driver_unregister(&wm831x_buckp_driver); + platform_driver_unregister(&wm831x_buckv_driver); +} +module_exit(wm831x_dcdc_exit); + +/* Module information */ +MODULE_AUTHOR("Mark Brown"); +MODULE_DESCRIPTION("WM831x DC-DC convertor driver"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:wm831x-buckv"); +MODULE_ALIAS("platform:wm831x-buckp"); diff --git a/drivers/regulator/wm831x-isink.c b/drivers/regulator/wm831x-isink.c new file mode 100644 index 00000000000..1d8d9879d3a --- /dev/null +++ b/drivers/regulator/wm831x-isink.c @@ -0,0 +1,260 @@ +/* + * wm831x-isink.c -- Current sink driver for the WM831x series + * + * Copyright 2009 Wolfson Microelectronics PLC. + * + * Author: Mark Brown <broonie@opensource.wolfsonmicro.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/init.h> +#include <linux/bitops.h> +#include <linux/err.h> +#include <linux/i2c.h> +#include <linux/platform_device.h> +#include <linux/regulator/driver.h> + +#include <linux/mfd/wm831x/core.h> +#include <linux/mfd/wm831x/regulator.h> +#include <linux/mfd/wm831x/pdata.h> + +#define WM831X_ISINK_MAX_NAME 7 + +struct wm831x_isink { + char name[WM831X_ISINK_MAX_NAME]; + struct regulator_desc desc; + int reg; + struct wm831x *wm831x; + struct regulator_dev *regulator; +}; + +static int wm831x_isink_enable(struct regulator_dev *rdev) +{ + struct wm831x_isink *isink = rdev_get_drvdata(rdev); + struct wm831x *wm831x = isink->wm831x; + int ret; + + /* We have a two stage enable: first start the ISINK... */ + ret = wm831x_set_bits(wm831x, isink->reg, WM831X_CS1_ENA, + WM831X_CS1_ENA); + if (ret != 0) + return ret; + + /* ...then enable drive */ + ret = wm831x_set_bits(wm831x, isink->reg, WM831X_CS1_DRIVE, + WM831X_CS1_DRIVE); + if (ret != 0) + wm831x_set_bits(wm831x, isink->reg, WM831X_CS1_ENA, 0); + + return ret; + +} + +static int wm831x_isink_disable(struct regulator_dev *rdev) +{ + struct wm831x_isink *isink = rdev_get_drvdata(rdev); + struct wm831x *wm831x = isink->wm831x; + int ret; + + ret = wm831x_set_bits(wm831x, isink->reg, WM831X_CS1_DRIVE, 0); + if (ret < 0) + return ret; + + ret = wm831x_set_bits(wm831x, isink->reg, WM831X_CS1_ENA, 0); + if (ret < 0) + return ret; + + return ret; + +} + +static int wm831x_isink_is_enabled(struct regulator_dev *rdev) +{ + struct wm831x_isink *isink = rdev_get_drvdata(rdev); + struct wm831x *wm831x = isink->wm831x; + int ret; + + ret = wm831x_reg_read(wm831x, isink->reg); + if (ret < 0) + return ret; + + if ((ret & (WM831X_CS1_ENA | WM831X_CS1_DRIVE)) == + (WM831X_CS1_ENA | WM831X_CS1_DRIVE)) + return 1; + else + return 0; +} + +static int wm831x_isink_set_current(struct regulator_dev *rdev, + int min_uA, int max_uA) +{ + struct wm831x_isink *isink = rdev_get_drvdata(rdev); + struct wm831x *wm831x = isink->wm831x; + int ret, i; + + for (i = 0; i < ARRAY_SIZE(wm831x_isinkv_values); i++) { + int val = wm831x_isinkv_values[i]; + if (min_uA >= val && val <= max_uA) { + ret = wm831x_set_bits(wm831x, isink->reg, + WM831X_CS1_ISEL_MASK, i); + return ret; + } + } + + return -EINVAL; +} + +static int wm831x_isink_get_current(struct regulator_dev *rdev) +{ + struct wm831x_isink *isink = rdev_get_drvdata(rdev); + struct wm831x *wm831x = isink->wm831x; + int ret; + + ret = wm831x_reg_read(wm831x, isink->reg); + if (ret < 0) + return ret; + + ret &= WM831X_CS1_ISEL_MASK; + if (ret > WM831X_ISINK_MAX_ISEL) + ret = WM831X_ISINK_MAX_ISEL; + + return wm831x_isinkv_values[ret]; +} + +static struct regulator_ops wm831x_isink_ops = { + .is_enabled = wm831x_isink_is_enabled, + .enable = wm831x_isink_enable, + .disable = wm831x_isink_disable, + .set_current_limit = wm831x_isink_set_current, + .get_current_limit = wm831x_isink_get_current, +}; + +static irqreturn_t wm831x_isink_irq(int irq, void *data) +{ + struct wm831x_isink *isink = data; + + regulator_notifier_call_chain(isink->regulator, + REGULATOR_EVENT_OVER_CURRENT, + NULL); + + return IRQ_HANDLED; +} + + +static __devinit int wm831x_isink_probe(struct platform_device *pdev) +{ + struct wm831x *wm831x = dev_get_drvdata(pdev->dev.parent); + struct wm831x_pdata *pdata = wm831x->dev->platform_data; + struct wm831x_isink *isink; + int id = pdev->id % ARRAY_SIZE(pdata->isink); + struct resource *res; + int ret, irq; + + dev_dbg(&pdev->dev, "Probing ISINK%d\n", id + 1); + + if (pdata == NULL || pdata->isink[id] == NULL) + return -ENODEV; + + isink = kzalloc(sizeof(struct wm831x_isink), GFP_KERNEL); + if (isink == NULL) { + dev_err(&pdev->dev, "Unable to allocate private data\n"); + return -ENOMEM; + } + + res = platform_get_resource(pdev, IORESOURCE_IO, 0); + if (res == NULL) { + dev_err(&pdev->dev, "No I/O resource\n"); + ret = -EINVAL; + goto err; + } + isink->reg = res->start; + + /* For current parts this is correct; probably need to revisit + * in future. + */ + snprintf(isink->name, sizeof(isink->name), "ISINK%d", id + 1); + isink->desc.name = isink->name; + isink->desc.id = id; + isink->desc.ops = &wm831x_isink_ops; + isink->desc.type = REGULATOR_CURRENT; + isink->desc.owner = THIS_MODULE; + + isink->regulator = regulator_register(&isink->desc, &pdev->dev, + pdata->isink[id], isink); + if (IS_ERR(isink->regulator)) { + ret = PTR_ERR(isink->regulator); + dev_err(wm831x->dev, "Failed to register ISINK%d: %d\n", + id + 1, ret); + goto err; + } + + irq = platform_get_irq(pdev, 0); + ret = wm831x_request_irq(wm831x, irq, wm831x_isink_irq, + IRQF_TRIGGER_RISING, isink->name, + isink); + if (ret != 0) { + dev_err(&pdev->dev, "Failed to request ISINK IRQ %d: %d\n", + irq, ret); + goto err_regulator; + } + + platform_set_drvdata(pdev, isink); + + return 0; + +err_regulator: + regulator_unregister(isink->regulator); +err: + kfree(isink); + return ret; +} + +static __devexit int wm831x_isink_remove(struct platform_device *pdev) +{ + struct wm831x_isink *isink = platform_get_drvdata(pdev); + struct wm831x *wm831x = isink->wm831x; + + wm831x_free_irq(wm831x, platform_get_irq(pdev, 0), isink); + + regulator_unregister(isink->regulator); + kfree(isink); + + return 0; +} + +static struct platform_driver wm831x_isink_driver = { + .probe = wm831x_isink_probe, + .remove = __devexit_p(wm831x_isink_remove), + .driver = { + .name = "wm831x-isink", + }, +}; + +static int __init wm831x_isink_init(void) +{ + int ret; + ret = platform_driver_register(&wm831x_isink_driver); + if (ret != 0) + pr_err("Failed to register WM831x ISINK driver: %d\n", ret); + + return ret; +} +subsys_initcall(wm831x_isink_init); + +static void __exit wm831x_isink_exit(void) +{ + platform_driver_unregister(&wm831x_isink_driver); +} +module_exit(wm831x_isink_exit); + +/* Module information */ +MODULE_AUTHOR("Mark Brown"); +MODULE_DESCRIPTION("WM831x current sink driver"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:wm831x-isink"); diff --git a/drivers/regulator/wm831x-ldo.c b/drivers/regulator/wm831x-ldo.c new file mode 100644 index 00000000000..bb61aede480 --- /dev/null +++ b/drivers/regulator/wm831x-ldo.c @@ -0,0 +1,852 @@ +/* + * wm831x-ldo.c -- LDO driver for the WM831x series + * + * Copyright 2009 Wolfson Microelectronics PLC. + * + * Author: Mark Brown <broonie@opensource.wolfsonmicro.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/init.h> +#include <linux/bitops.h> +#include <linux/err.h> +#include <linux/i2c.h> +#include <linux/platform_device.h> +#include <linux/regulator/driver.h> + +#include <linux/mfd/wm831x/core.h> +#include <linux/mfd/wm831x/regulator.h> +#include <linux/mfd/wm831x/pdata.h> + +#define WM831X_LDO_MAX_NAME 6 + +#define WM831X_LDO_CONTROL 0 +#define WM831X_LDO_ON_CONTROL 1 +#define WM831X_LDO_SLEEP_CONTROL 2 + +#define WM831X_ALIVE_LDO_ON_CONTROL 0 +#define WM831X_ALIVE_LDO_SLEEP_CONTROL 1 + +struct wm831x_ldo { + char name[WM831X_LDO_MAX_NAME]; + struct regulator_desc desc; + int base; + struct wm831x *wm831x; + struct regulator_dev *regulator; +}; + +/* + * Shared + */ + +static int wm831x_ldo_is_enabled(struct regulator_dev *rdev) +{ + struct wm831x_ldo *ldo = rdev_get_drvdata(rdev); + struct wm831x *wm831x = ldo->wm831x; + int mask = 1 << rdev_get_id(rdev); + int reg; + + reg = wm831x_reg_read(wm831x, WM831X_LDO_ENABLE); + if (reg < 0) + return reg; + + if (reg & mask) + return 1; + else + return 0; +} + +static int wm831x_ldo_enable(struct regulator_dev *rdev) +{ + struct wm831x_ldo *ldo = rdev_get_drvdata(rdev); + struct wm831x *wm831x = ldo->wm831x; + int mask = 1 << rdev_get_id(rdev); + + return wm831x_set_bits(wm831x, WM831X_LDO_ENABLE, mask, mask); +} + +static int wm831x_ldo_disable(struct regulator_dev *rdev) +{ + struct wm831x_ldo *ldo = rdev_get_drvdata(rdev); + struct wm831x *wm831x = ldo->wm831x; + int mask = 1 << rdev_get_id(rdev); + + return wm831x_set_bits(wm831x, WM831X_LDO_ENABLE, mask, 0); +} + +static irqreturn_t wm831x_ldo_uv_irq(int irq, void *data) +{ + struct wm831x_ldo *ldo = data; + + regulator_notifier_call_chain(ldo->regulator, + REGULATOR_EVENT_UNDER_VOLTAGE, + NULL); + + return IRQ_HANDLED; +} + +/* + * General purpose LDOs + */ + +#define WM831X_GP_LDO_SELECTOR_LOW 0xe +#define WM831X_GP_LDO_MAX_SELECTOR 0x1f + +static int wm831x_gp_ldo_list_voltage(struct regulator_dev *rdev, + unsigned int selector) +{ + /* 0.9-1.6V in 50mV steps */ + if (selector <= WM831X_GP_LDO_SELECTOR_LOW) + return 900000 + (selector * 50000); + /* 1.7-3.3V in 50mV steps */ + if (selector <= WM831X_GP_LDO_MAX_SELECTOR) + return 1600000 + ((selector - WM831X_GP_LDO_SELECTOR_LOW) + * 100000); + return -EINVAL; +} + +static int wm831x_gp_ldo_set_voltage_int(struct regulator_dev *rdev, int reg, + int min_uV, int max_uV) +{ + struct wm831x_ldo *ldo = rdev_get_drvdata(rdev); + struct wm831x *wm831x = ldo->wm831x; + int vsel, ret; + + if (min_uV < 900000) + vsel = 0; + else if (min_uV < 1700000) + vsel = ((min_uV - 900000) / 50000); + else + vsel = ((min_uV - 1700000) / 100000) + + WM831X_GP_LDO_SELECTOR_LOW + 1; + + ret = wm831x_gp_ldo_list_voltage(rdev, vsel); + if (ret < 0) + return ret; + if (ret < min_uV || ret > max_uV) + return -EINVAL; + + return wm831x_set_bits(wm831x, reg, WM831X_LDO1_ON_VSEL_MASK, vsel); +} + +static int wm831x_gp_ldo_set_voltage(struct regulator_dev *rdev, + int min_uV, int max_uV) +{ + struct wm831x_ldo *ldo = rdev_get_drvdata(rdev); + int reg = ldo->base + WM831X_LDO_ON_CONTROL; + + return wm831x_gp_ldo_set_voltage_int(rdev, reg, min_uV, max_uV); +} + +static int wm831x_gp_ldo_set_suspend_voltage(struct regulator_dev *rdev, + int uV) +{ + struct wm831x_ldo *ldo = rdev_get_drvdata(rdev); + int reg = ldo->base + WM831X_LDO_SLEEP_CONTROL; + + return wm831x_gp_ldo_set_voltage_int(rdev, reg, uV, uV); +} + +static int wm831x_gp_ldo_get_voltage(struct regulator_dev *rdev) +{ + struct wm831x_ldo *ldo = rdev_get_drvdata(rdev); + struct wm831x *wm831x = ldo->wm831x; + int reg = ldo->base + WM831X_LDO_ON_CONTROL; + int ret; + + ret = wm831x_reg_read(wm831x, reg); + if (ret < 0) + return ret; + + ret &= WM831X_LDO1_ON_VSEL_MASK; + + return wm831x_gp_ldo_list_voltage(rdev, ret); +} + +static unsigned int wm831x_gp_ldo_get_mode(struct regulator_dev *rdev) +{ + struct wm831x_ldo *ldo = rdev_get_drvdata(rdev); + struct wm831x *wm831x = ldo->wm831x; + int ctrl_reg = ldo->base + WM831X_LDO_CONTROL; + int on_reg = ldo->base + WM831X_LDO_ON_CONTROL; + unsigned int ret; + + ret = wm831x_reg_read(wm831x, on_reg); + if (ret < 0) + return 0; + + if (!(ret & WM831X_LDO1_ON_MODE)) + return REGULATOR_MODE_NORMAL; + + ret = wm831x_reg_read(wm831x, ctrl_reg); + if (ret < 0) + return 0; + + if (ret & WM831X_LDO1_LP_MODE) + return REGULATOR_MODE_STANDBY; + else + return REGULATOR_MODE_IDLE; +} + +static int wm831x_gp_ldo_set_mode(struct regulator_dev *rdev, + unsigned int mode) +{ + struct wm831x_ldo *ldo = rdev_get_drvdata(rdev); + struct wm831x *wm831x = ldo->wm831x; + int ctrl_reg = ldo->base + WM831X_LDO_CONTROL; + int on_reg = ldo->base + WM831X_LDO_ON_CONTROL; + int ret; + + + switch (mode) { + case REGULATOR_MODE_NORMAL: + ret = wm831x_set_bits(wm831x, on_reg, + WM831X_LDO1_ON_MODE, 0); + if (ret < 0) + return ret; + break; + + case REGULATOR_MODE_IDLE: + ret = wm831x_set_bits(wm831x, ctrl_reg, + WM831X_LDO1_LP_MODE, + WM831X_LDO1_LP_MODE); + if (ret < 0) + return ret; + + ret = wm831x_set_bits(wm831x, on_reg, + WM831X_LDO1_ON_MODE, + WM831X_LDO1_ON_MODE); + if (ret < 0) + return ret; + + case REGULATOR_MODE_STANDBY: + ret = wm831x_set_bits(wm831x, ctrl_reg, + WM831X_LDO1_LP_MODE, 0); + if (ret < 0) + return ret; + + ret = wm831x_set_bits(wm831x, on_reg, + WM831X_LDO1_ON_MODE, + WM831X_LDO1_ON_MODE); + if (ret < 0) + return ret; + break; + + default: + return -EINVAL; + } + + return 0; +} + +static int wm831x_gp_ldo_get_status(struct regulator_dev *rdev) +{ + struct wm831x_ldo *ldo = rdev_get_drvdata(rdev); + struct wm831x *wm831x = ldo->wm831x; + int mask = 1 << rdev_get_id(rdev); + int ret; + + /* Is the regulator on? */ + ret = wm831x_reg_read(wm831x, WM831X_LDO_STATUS); + if (ret < 0) + return ret; + if (!(ret & mask)) + return REGULATOR_STATUS_OFF; + + /* Is it reporting under voltage? */ + ret = wm831x_reg_read(wm831x, WM831X_LDO_UV_STATUS); + if (ret & mask) + return REGULATOR_STATUS_ERROR; + + ret = wm831x_gp_ldo_get_mode(rdev); + if (ret < 0) + return ret; + else + return regulator_mode_to_status(ret); +} + +static unsigned int wm831x_gp_ldo_get_optimum_mode(struct regulator_dev *rdev, + int input_uV, + int output_uV, int load_uA) +{ + if (load_uA < 20000) + return REGULATOR_MODE_STANDBY; + if (load_uA < 50000) + return REGULATOR_MODE_IDLE; + return REGULATOR_MODE_NORMAL; +} + + +static struct regulator_ops wm831x_gp_ldo_ops = { + .list_voltage = wm831x_gp_ldo_list_voltage, + .get_voltage = wm831x_gp_ldo_get_voltage, + .set_voltage = wm831x_gp_ldo_set_voltage, + .set_suspend_voltage = wm831x_gp_ldo_set_suspend_voltage, + .get_mode = wm831x_gp_ldo_get_mode, + .set_mode = wm831x_gp_ldo_set_mode, + .get_status = wm831x_gp_ldo_get_status, + .get_optimum_mode = wm831x_gp_ldo_get_optimum_mode, + + .is_enabled = wm831x_ldo_is_enabled, + .enable = wm831x_ldo_enable, + .disable = wm831x_ldo_disable, +}; + +static __devinit int wm831x_gp_ldo_probe(struct platform_device *pdev) +{ + struct wm831x *wm831x = dev_get_drvdata(pdev->dev.parent); + struct wm831x_pdata *pdata = wm831x->dev->platform_data; + int id = pdev->id % ARRAY_SIZE(pdata->ldo); + struct wm831x_ldo *ldo; + struct resource *res; + int ret, irq; + + dev_dbg(&pdev->dev, "Probing LDO%d\n", id + 1); + + if (pdata == NULL || pdata->ldo[id] == NULL) + return -ENODEV; + + ldo = kzalloc(sizeof(struct wm831x_ldo), GFP_KERNEL); + if (ldo == NULL) { + dev_err(&pdev->dev, "Unable to allocate private data\n"); + return -ENOMEM; + } + + ldo->wm831x = wm831x; + + res = platform_get_resource(pdev, IORESOURCE_IO, 0); + if (res == NULL) { + dev_err(&pdev->dev, "No I/O resource\n"); + ret = -EINVAL; + goto err; + } + ldo->base = res->start; + + snprintf(ldo->name, sizeof(ldo->name), "LDO%d", id + 1); + ldo->desc.name = ldo->name; + ldo->desc.id = id; + ldo->desc.type = REGULATOR_VOLTAGE; + ldo->desc.n_voltages = WM831X_GP_LDO_MAX_SELECTOR + 1; + ldo->desc.ops = &wm831x_gp_ldo_ops; + ldo->desc.owner = THIS_MODULE; + + ldo->regulator = regulator_register(&ldo->desc, &pdev->dev, + pdata->ldo[id], ldo); + if (IS_ERR(ldo->regulator)) { + ret = PTR_ERR(ldo->regulator); + dev_err(wm831x->dev, "Failed to register LDO%d: %d\n", + id + 1, ret); + goto err; + } + + irq = platform_get_irq_byname(pdev, "UV"); + ret = wm831x_request_irq(wm831x, irq, wm831x_ldo_uv_irq, + IRQF_TRIGGER_RISING, ldo->name, + ldo); + if (ret != 0) { + dev_err(&pdev->dev, "Failed to request UV IRQ %d: %d\n", + irq, ret); + goto err_regulator; + } + + platform_set_drvdata(pdev, ldo); + + return 0; + +err_regulator: + regulator_unregister(ldo->regulator); +err: + kfree(ldo); + return ret; +} + +static __devexit int wm831x_gp_ldo_remove(struct platform_device *pdev) +{ + struct wm831x_ldo *ldo = platform_get_drvdata(pdev); + struct wm831x *wm831x = ldo->wm831x; + + wm831x_free_irq(wm831x, platform_get_irq_byname(pdev, "UV"), ldo); + regulator_unregister(ldo->regulator); + kfree(ldo); + + return 0; +} + +static struct platform_driver wm831x_gp_ldo_driver = { + .probe = wm831x_gp_ldo_probe, + .remove = __devexit_p(wm831x_gp_ldo_remove), + .driver = { + .name = "wm831x-ldo", + }, +}; + +/* + * Analogue LDOs + */ + + +#define WM831X_ALDO_SELECTOR_LOW 0xc +#define WM831X_ALDO_MAX_SELECTOR 0x1f + +static int wm831x_aldo_list_voltage(struct regulator_dev *rdev, + unsigned int selector) +{ + /* 1-1.6V in 50mV steps */ + if (selector <= WM831X_ALDO_SELECTOR_LOW) + return 1000000 + (selector * 50000); + /* 1.7-3.5V in 50mV steps */ + if (selector <= WM831X_ALDO_MAX_SELECTOR) + return 1600000 + ((selector - WM831X_ALDO_SELECTOR_LOW) + * 100000); + return -EINVAL; +} + +static int wm831x_aldo_set_voltage_int(struct regulator_dev *rdev, int reg, + int min_uV, int max_uV) +{ + struct wm831x_ldo *ldo = rdev_get_drvdata(rdev); + struct wm831x *wm831x = ldo->wm831x; + int vsel, ret; + + if (min_uV < 1000000) + vsel = 0; + else if (min_uV < 1700000) + vsel = ((min_uV - 1000000) / 50000); + else + vsel = ((min_uV - 1700000) / 100000) + + WM831X_ALDO_SELECTOR_LOW + 1; + + ret = wm831x_aldo_list_voltage(rdev, vsel); + if (ret < 0) + return ret; + if (ret < min_uV || ret > max_uV) + return -EINVAL; + + return wm831x_set_bits(wm831x, reg, WM831X_LDO7_ON_VSEL_MASK, vsel); +} + +static int wm831x_aldo_set_voltage(struct regulator_dev *rdev, + int min_uV, int max_uV) +{ + struct wm831x_ldo *ldo = rdev_get_drvdata(rdev); + int reg = ldo->base + WM831X_LDO_ON_CONTROL; + + return wm831x_aldo_set_voltage_int(rdev, reg, min_uV, max_uV); +} + +static int wm831x_aldo_set_suspend_voltage(struct regulator_dev *rdev, + int uV) +{ + struct wm831x_ldo *ldo = rdev_get_drvdata(rdev); + int reg = ldo->base + WM831X_LDO_SLEEP_CONTROL; + + return wm831x_aldo_set_voltage_int(rdev, reg, uV, uV); +} + +static int wm831x_aldo_get_voltage(struct regulator_dev *rdev) +{ + struct wm831x_ldo *ldo = rdev_get_drvdata(rdev); + struct wm831x *wm831x = ldo->wm831x; + int reg = ldo->base + WM831X_LDO_ON_CONTROL; + int ret; + + ret = wm831x_reg_read(wm831x, reg); + if (ret < 0) + return ret; + + ret &= WM831X_LDO7_ON_VSEL_MASK; + + return wm831x_aldo_list_voltage(rdev, ret); +} + +static unsigned int wm831x_aldo_get_mode(struct regulator_dev *rdev) +{ + struct wm831x_ldo *ldo = rdev_get_drvdata(rdev); + struct wm831x *wm831x = ldo->wm831x; + int on_reg = ldo->base + WM831X_LDO_ON_CONTROL; + unsigned int ret; + + ret = wm831x_reg_read(wm831x, on_reg); + if (ret < 0) + return 0; + + if (ret & WM831X_LDO7_ON_MODE) + return REGULATOR_MODE_IDLE; + else + return REGULATOR_MODE_NORMAL; +} + +static int wm831x_aldo_set_mode(struct regulator_dev *rdev, + unsigned int mode) +{ + struct wm831x_ldo *ldo = rdev_get_drvdata(rdev); + struct wm831x *wm831x = ldo->wm831x; + int ctrl_reg = ldo->base + WM831X_LDO_CONTROL; + int on_reg = ldo->base + WM831X_LDO_ON_CONTROL; + int ret; + + + switch (mode) { + case REGULATOR_MODE_NORMAL: + ret = wm831x_set_bits(wm831x, on_reg, + WM831X_LDO7_ON_MODE, 0); + if (ret < 0) + return ret; + break; + + case REGULATOR_MODE_IDLE: + ret = wm831x_set_bits(wm831x, ctrl_reg, + WM831X_LDO7_ON_MODE, + WM831X_LDO7_ON_MODE); + if (ret < 0) + return ret; + break; + + default: + return -EINVAL; + } + + return 0; +} + +static int wm831x_aldo_get_status(struct regulator_dev *rdev) +{ + struct wm831x_ldo *ldo = rdev_get_drvdata(rdev); + struct wm831x *wm831x = ldo->wm831x; + int mask = 1 << rdev_get_id(rdev); + int ret; + + /* Is the regulator on? */ + ret = wm831x_reg_read(wm831x, WM831X_LDO_STATUS); + if (ret < 0) + return ret; + if (!(ret & mask)) + return REGULATOR_STATUS_OFF; + + /* Is it reporting under voltage? */ + ret = wm831x_reg_read(wm831x, WM831X_LDO_UV_STATUS); + if (ret & mask) + return REGULATOR_STATUS_ERROR; + + ret = wm831x_aldo_get_mode(rdev); + if (ret < 0) + return ret; + else + return regulator_mode_to_status(ret); +} + +static struct regulator_ops wm831x_aldo_ops = { + .list_voltage = wm831x_aldo_list_voltage, + .get_voltage = wm831x_aldo_get_voltage, + .set_voltage = wm831x_aldo_set_voltage, + .set_suspend_voltage = wm831x_aldo_set_suspend_voltage, + .get_mode = wm831x_aldo_get_mode, + .set_mode = wm831x_aldo_set_mode, + .get_status = wm831x_aldo_get_status, + + .is_enabled = wm831x_ldo_is_enabled, + .enable = wm831x_ldo_enable, + .disable = wm831x_ldo_disable, +}; + +static __devinit int wm831x_aldo_probe(struct platform_device *pdev) +{ + struct wm831x *wm831x = dev_get_drvdata(pdev->dev.parent); + struct wm831x_pdata *pdata = wm831x->dev->platform_data; + int id = pdev->id % ARRAY_SIZE(pdata->ldo); + struct wm831x_ldo *ldo; + struct resource *res; + int ret, irq; + + dev_dbg(&pdev->dev, "Probing LDO%d\n", id + 1); + + if (pdata == NULL || pdata->ldo[id] == NULL) + return -ENODEV; + + ldo = kzalloc(sizeof(struct wm831x_ldo), GFP_KERNEL); + if (ldo == NULL) { + dev_err(&pdev->dev, "Unable to allocate private data\n"); + return -ENOMEM; + } + + ldo->wm831x = wm831x; + + res = platform_get_resource(pdev, IORESOURCE_IO, 0); + if (res == NULL) { + dev_err(&pdev->dev, "No I/O resource\n"); + ret = -EINVAL; + goto err; + } + ldo->base = res->start; + + snprintf(ldo->name, sizeof(ldo->name), "LDO%d", id + 1); + ldo->desc.name = ldo->name; + ldo->desc.id = id; + ldo->desc.type = REGULATOR_VOLTAGE; + ldo->desc.n_voltages = WM831X_ALDO_MAX_SELECTOR + 1; + ldo->desc.ops = &wm831x_aldo_ops; + ldo->desc.owner = THIS_MODULE; + + ldo->regulator = regulator_register(&ldo->desc, &pdev->dev, + pdata->ldo[id], ldo); + if (IS_ERR(ldo->regulator)) { + ret = PTR_ERR(ldo->regulator); + dev_err(wm831x->dev, "Failed to register LDO%d: %d\n", + id + 1, ret); + goto err; + } + + irq = platform_get_irq_byname(pdev, "UV"); + ret = wm831x_request_irq(wm831x, irq, wm831x_ldo_uv_irq, + IRQF_TRIGGER_RISING, ldo->name, + ldo); + if (ret != 0) { + dev_err(&pdev->dev, "Failed to request UV IRQ %d: %d\n", + irq, ret); + goto err_regulator; + } + + platform_set_drvdata(pdev, ldo); + + return 0; + +err_regulator: + regulator_unregister(ldo->regulator); +err: + kfree(ldo); + return ret; +} + +static __devexit int wm831x_aldo_remove(struct platform_device *pdev) +{ + struct wm831x_ldo *ldo = platform_get_drvdata(pdev); + struct wm831x *wm831x = ldo->wm831x; + + wm831x_free_irq(wm831x, platform_get_irq_byname(pdev, "UV"), ldo); + regulator_unregister(ldo->regulator); + kfree(ldo); + + return 0; +} + +static struct platform_driver wm831x_aldo_driver = { + .probe = wm831x_aldo_probe, + .remove = __devexit_p(wm831x_aldo_remove), + .driver = { + .name = "wm831x-aldo", + }, +}; + +/* + * Alive LDO + */ + +#define WM831X_ALIVE_LDO_MAX_SELECTOR 0xf + +static int wm831x_alive_ldo_list_voltage(struct regulator_dev *rdev, + unsigned int selector) +{ + /* 0.8-1.55V in 50mV steps */ + if (selector <= WM831X_ALIVE_LDO_MAX_SELECTOR) + return 800000 + (selector * 50000); + return -EINVAL; +} + +static int wm831x_alive_ldo_set_voltage_int(struct regulator_dev *rdev, + int reg, + int min_uV, int max_uV) +{ + struct wm831x_ldo *ldo = rdev_get_drvdata(rdev); + struct wm831x *wm831x = ldo->wm831x; + int vsel, ret; + + vsel = (min_uV - 800000) / 50000; + + ret = wm831x_alive_ldo_list_voltage(rdev, vsel); + if (ret < 0) + return ret; + if (ret < min_uV || ret > max_uV) + return -EINVAL; + + return wm831x_set_bits(wm831x, reg, WM831X_LDO11_ON_VSEL_MASK, vsel); +} + +static int wm831x_alive_ldo_set_voltage(struct regulator_dev *rdev, + int min_uV, int max_uV) +{ + struct wm831x_ldo *ldo = rdev_get_drvdata(rdev); + int reg = ldo->base + WM831X_ALIVE_LDO_ON_CONTROL; + + return wm831x_alive_ldo_set_voltage_int(rdev, reg, min_uV, max_uV); +} + +static int wm831x_alive_ldo_set_suspend_voltage(struct regulator_dev *rdev, + int uV) +{ + struct wm831x_ldo *ldo = rdev_get_drvdata(rdev); + int reg = ldo->base + WM831X_ALIVE_LDO_SLEEP_CONTROL; + + return wm831x_alive_ldo_set_voltage_int(rdev, reg, uV, uV); +} + +static int wm831x_alive_ldo_get_voltage(struct regulator_dev *rdev) +{ + struct wm831x_ldo *ldo = rdev_get_drvdata(rdev); + struct wm831x *wm831x = ldo->wm831x; + int reg = ldo->base + WM831X_ALIVE_LDO_ON_CONTROL; + int ret; + + ret = wm831x_reg_read(wm831x, reg); + if (ret < 0) + return ret; + + ret &= WM831X_LDO11_ON_VSEL_MASK; + + return wm831x_alive_ldo_list_voltage(rdev, ret); +} + +static int wm831x_alive_ldo_get_status(struct regulator_dev *rdev) +{ + struct wm831x_ldo *ldo = rdev_get_drvdata(rdev); + struct wm831x *wm831x = ldo->wm831x; + int mask = 1 << rdev_get_id(rdev); + int ret; + + /* Is the regulator on? */ + ret = wm831x_reg_read(wm831x, WM831X_LDO_STATUS); + if (ret < 0) + return ret; + if (ret & mask) + return REGULATOR_STATUS_ON; + else + return REGULATOR_STATUS_OFF; +} + +static struct regulator_ops wm831x_alive_ldo_ops = { + .list_voltage = wm831x_alive_ldo_list_voltage, + .get_voltage = wm831x_alive_ldo_get_voltage, + .set_voltage = wm831x_alive_ldo_set_voltage, + .set_suspend_voltage = wm831x_alive_ldo_set_suspend_voltage, + .get_status = wm831x_alive_ldo_get_status, + + .is_enabled = wm831x_ldo_is_enabled, + .enable = wm831x_ldo_enable, + .disable = wm831x_ldo_disable, +}; + +static __devinit int wm831x_alive_ldo_probe(struct platform_device *pdev) +{ + struct wm831x *wm831x = dev_get_drvdata(pdev->dev.parent); + struct wm831x_pdata *pdata = wm831x->dev->platform_data; + int id = pdev->id % ARRAY_SIZE(pdata->ldo); + struct wm831x_ldo *ldo; + struct resource *res; + int ret; + + dev_dbg(&pdev->dev, "Probing LDO%d\n", id + 1); + + if (pdata == NULL || pdata->ldo[id] == NULL) + return -ENODEV; + + ldo = kzalloc(sizeof(struct wm831x_ldo), GFP_KERNEL); + if (ldo == NULL) { + dev_err(&pdev->dev, "Unable to allocate private data\n"); + return -ENOMEM; + } + + ldo->wm831x = wm831x; + + res = platform_get_resource(pdev, IORESOURCE_IO, 0); + if (res == NULL) { + dev_err(&pdev->dev, "No I/O resource\n"); + ret = -EINVAL; + goto err; + } + ldo->base = res->start; + + snprintf(ldo->name, sizeof(ldo->name), "LDO%d", id + 1); + ldo->desc.name = ldo->name; + ldo->desc.id = id; + ldo->desc.type = REGULATOR_VOLTAGE; + ldo->desc.n_voltages = WM831X_ALIVE_LDO_MAX_SELECTOR + 1; + ldo->desc.ops = &wm831x_alive_ldo_ops; + ldo->desc.owner = THIS_MODULE; + + ldo->regulator = regulator_register(&ldo->desc, &pdev->dev, + pdata->ldo[id], ldo); + if (IS_ERR(ldo->regulator)) { + ret = PTR_ERR(ldo->regulator); + dev_err(wm831x->dev, "Failed to register LDO%d: %d\n", + id + 1, ret); + goto err; + } + + platform_set_drvdata(pdev, ldo); + + return 0; + +err: + kfree(ldo); + return ret; +} + +static __devexit int wm831x_alive_ldo_remove(struct platform_device *pdev) +{ + struct wm831x_ldo *ldo = platform_get_drvdata(pdev); + + regulator_unregister(ldo->regulator); + kfree(ldo); + + return 0; +} + +static struct platform_driver wm831x_alive_ldo_driver = { + .probe = wm831x_alive_ldo_probe, + .remove = __devexit_p(wm831x_alive_ldo_remove), + .driver = { + .name = "wm831x-alive-ldo", + }, +}; + +static int __init wm831x_ldo_init(void) +{ + int ret; + + ret = platform_driver_register(&wm831x_gp_ldo_driver); + if (ret != 0) + pr_err("Failed to register WM831x GP LDO driver: %d\n", ret); + + ret = platform_driver_register(&wm831x_aldo_driver); + if (ret != 0) + pr_err("Failed to register WM831x ALDO driver: %d\n", ret); + + ret = platform_driver_register(&wm831x_alive_ldo_driver); + if (ret != 0) + pr_err("Failed to register WM831x alive LDO driver: %d\n", + ret); + + return 0; +} +subsys_initcall(wm831x_ldo_init); + +static void __exit wm831x_ldo_exit(void) +{ + platform_driver_unregister(&wm831x_alive_ldo_driver); + platform_driver_unregister(&wm831x_aldo_driver); + platform_driver_unregister(&wm831x_gp_ldo_driver); +} +module_exit(wm831x_ldo_exit); + +/* Module information */ +MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>"); +MODULE_DESCRIPTION("WM831x LDO driver"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:wm831x-ldo"); +MODULE_ALIAS("platform:wm831x-aldo"); +MODULE_ALIAS("platform:wm831x-aliveldo"); diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig index 81adbdbd504..73771b09fbd 100644 --- a/drivers/rtc/Kconfig +++ b/drivers/rtc/Kconfig @@ -518,6 +518,16 @@ config RTC_DRV_V3020 This driver can also be built as a module. If so, the module will be called rtc-v3020. +config RTC_DRV_WM831X + tristate "Wolfson Microelectronics WM831x RTC" + depends on MFD_WM831X + help + If you say yes here you will get support for the RTC subsystem + of the Wolfson Microelectronics WM831X series PMICs. + + This driver can also be built as a module. If so, the module + will be called "rtc-wm831x". + config RTC_DRV_WM8350 tristate "Wolfson Microelectronics WM8350 RTC" depends on MFD_WM8350 @@ -535,6 +545,15 @@ config RTC_DRV_PCF50633 If you say yes here you get support for the RTC subsystem of the NXP PCF50633 used in embedded systems. +config RTC_DRV_AB3100 + tristate "ST-Ericsson AB3100 RTC" + depends on AB3100_CORE + default y if AB3100_CORE + help + Select this to enable the ST-Ericsson AB3100 Mixed Signal IC RTC + support. This chip contains a battery- and capacitor-backed RTC. + + comment "on-CPU RTC drivers" config RTC_DRV_OMAP diff --git a/drivers/rtc/Makefile b/drivers/rtc/Makefile index 3c0f2b2ac92..5e152ffe505 100644 --- a/drivers/rtc/Makefile +++ b/drivers/rtc/Makefile @@ -17,6 +17,7 @@ rtc-core-$(CONFIG_RTC_INTF_SYSFS) += rtc-sysfs.o # Keep the list ordered. +obj-$(CONFIG_RTC_DRV_AB3100) += rtc-ab3100.o obj-$(CONFIG_RTC_DRV_AT32AP700X)+= rtc-at32ap700x.o obj-$(CONFIG_RTC_DRV_AT91RM9200)+= rtc-at91rm9200.o obj-$(CONFIG_RTC_DRV_AT91SAM9) += rtc-at91sam9.o @@ -74,6 +75,7 @@ obj-$(CONFIG_RTC_DRV_TWL4030) += rtc-twl4030.o obj-$(CONFIG_RTC_DRV_TX4939) += rtc-tx4939.o obj-$(CONFIG_RTC_DRV_V3020) += rtc-v3020.o obj-$(CONFIG_RTC_DRV_VR41XX) += rtc-vr41xx.o +obj-$(CONFIG_RTC_DRV_WM831X) += rtc-wm831x.o obj-$(CONFIG_RTC_DRV_WM8350) += rtc-wm8350.o obj-$(CONFIG_RTC_DRV_X1205) += rtc-x1205.o obj-$(CONFIG_RTC_DRV_PCF50633) += rtc-pcf50633.o diff --git a/drivers/rtc/rtc-ab3100.c b/drivers/rtc/rtc-ab3100.c new file mode 100644 index 00000000000..4704aac2b5a --- /dev/null +++ b/drivers/rtc/rtc-ab3100.c @@ -0,0 +1,281 @@ +/* + * Copyright (C) 2007-2009 ST-Ericsson AB + * License terms: GNU General Public License (GPL) version 2 + * RTC clock driver for the AB3100 Analog Baseband Chip + * Author: Linus Walleij <linus.walleij@stericsson.com> + */ +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/rtc.h> +#include <linux/mfd/ab3100.h> + +/* Clock rate in Hz */ +#define AB3100_RTC_CLOCK_RATE 32768 + +/* + * The AB3100 RTC registers. These are the same for + * AB3000 and AB3100. + * Control register: + * Bit 0: RTC Monitor cleared=0, active=1, if you set it + * to 1 it remains active until RTC power is lost. + * Bit 1: 32 kHz Oscillator, 0 = on, 1 = bypass + * Bit 2: Alarm on, 0 = off, 1 = on + * Bit 3: 32 kHz buffer disabling, 0 = enabled, 1 = disabled + */ +#define AB3100_RTC 0x53 +/* default setting, buffer disabled, alarm on */ +#define RTC_SETTING 0x30 +/* Alarm when AL0-AL3 == TI0-TI3 */ +#define AB3100_AL0 0x56 +#define AB3100_AL1 0x57 +#define AB3100_AL2 0x58 +#define AB3100_AL3 0x59 +/* This 48-bit register that counts up at 32768 Hz */ +#define AB3100_TI0 0x5a +#define AB3100_TI1 0x5b +#define AB3100_TI2 0x5c +#define AB3100_TI3 0x5d +#define AB3100_TI4 0x5e +#define AB3100_TI5 0x5f + +/* + * RTC clock functions and device struct declaration + */ +static int ab3100_rtc_set_mmss(struct device *dev, unsigned long secs) +{ + struct ab3100 *ab3100_data = dev_get_drvdata(dev); + u8 regs[] = {AB3100_TI0, AB3100_TI1, AB3100_TI2, + AB3100_TI3, AB3100_TI4, AB3100_TI5}; + unsigned char buf[6]; + u64 fat_time = (u64) secs * AB3100_RTC_CLOCK_RATE * 2; + int err = 0; + int i; + + buf[0] = (fat_time) & 0xFF; + buf[1] = (fat_time >> 8) & 0xFF; + buf[2] = (fat_time >> 16) & 0xFF; + buf[3] = (fat_time >> 24) & 0xFF; + buf[4] = (fat_time >> 32) & 0xFF; + buf[5] = (fat_time >> 40) & 0xFF; + + for (i = 0; i < 6; i++) { + err = ab3100_set_register_interruptible(ab3100_data, + regs[i], buf[i]); + if (err) + return err; + } + + /* Set the flag to mark that the clock is now set */ + return ab3100_mask_and_set_register_interruptible(ab3100_data, + AB3100_RTC, + 0xFE, 0x01); + +} + +static int ab3100_rtc_read_time(struct device *dev, struct rtc_time *tm) +{ + struct ab3100 *ab3100_data = dev_get_drvdata(dev); + unsigned long time; + u8 rtcval; + int err; + + err = ab3100_get_register_interruptible(ab3100_data, + AB3100_RTC, &rtcval); + if (err) + return err; + + if (!(rtcval & 0x01)) { + dev_info(dev, "clock not set (lost power)"); + return -EINVAL; + } else { + u64 fat_time; + u8 buf[6]; + + /* Read out time registers */ + err = ab3100_get_register_page_interruptible(ab3100_data, + AB3100_TI0, + buf, 6); + if (err != 0) + return err; + + fat_time = ((u64) buf[5] << 40) | ((u64) buf[4] << 32) | + ((u64) buf[3] << 24) | ((u64) buf[2] << 16) | + ((u64) buf[1] << 8) | (u64) buf[0]; + time = (unsigned long) (fat_time / + (u64) (AB3100_RTC_CLOCK_RATE * 2)); + } + + rtc_time_to_tm(time, tm); + + return rtc_valid_tm(tm); +} + +static int ab3100_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alarm) +{ + struct ab3100 *ab3100_data = dev_get_drvdata(dev); + unsigned long time; + u64 fat_time; + u8 buf[6]; + u8 rtcval; + int err; + + /* Figure out if alarm is enabled or not */ + err = ab3100_get_register_interruptible(ab3100_data, + AB3100_RTC, &rtcval); + if (err) + return err; + if (rtcval & 0x04) + alarm->enabled = 1; + else + alarm->enabled = 0; + /* No idea how this could be represented */ + alarm->pending = 0; + /* Read out alarm registers, only 4 bytes */ + err = ab3100_get_register_page_interruptible(ab3100_data, + AB3100_AL0, buf, 4); + if (err) + return err; + fat_time = ((u64) buf[3] << 40) | ((u64) buf[2] << 32) | + ((u64) buf[1] << 24) | ((u64) buf[0] << 16); + time = (unsigned long) (fat_time / (u64) (AB3100_RTC_CLOCK_RATE * 2)); + + rtc_time_to_tm(time, &alarm->time); + + return rtc_valid_tm(&alarm->time); +} + +static int ab3100_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alarm) +{ + struct ab3100 *ab3100_data = dev_get_drvdata(dev); + u8 regs[] = {AB3100_AL0, AB3100_AL1, AB3100_AL2, AB3100_AL3}; + unsigned char buf[4]; + unsigned long secs; + u64 fat_time; + int err; + int i; + + rtc_tm_to_time(&alarm->time, &secs); + fat_time = (u64) secs * AB3100_RTC_CLOCK_RATE * 2; + buf[0] = (fat_time >> 16) & 0xFF; + buf[1] = (fat_time >> 24) & 0xFF; + buf[2] = (fat_time >> 32) & 0xFF; + buf[3] = (fat_time >> 40) & 0xFF; + + /* Set the alarm */ + for (i = 0; i < 4; i++) { + err = ab3100_set_register_interruptible(ab3100_data, + regs[i], buf[i]); + if (err) + return err; + } + /* Then enable the alarm */ + return ab3100_mask_and_set_register_interruptible(ab3100_data, + AB3100_RTC, ~(1 << 2), + alarm->enabled << 2); +} + +static int ab3100_rtc_irq_enable(struct device *dev, unsigned int enabled) +{ + struct ab3100 *ab3100_data = dev_get_drvdata(dev); + + /* + * It's not possible to enable/disable the alarm IRQ for this RTC. + * It does not actually trigger any IRQ: instead its only function is + * to power up the system, if it wasn't on. This will manifest as + * a "power up cause" in the AB3100 power driver (battery charging etc) + * and need to be handled there instead. + */ + if (enabled) + return ab3100_mask_and_set_register_interruptible(ab3100_data, + AB3100_RTC, ~(1 << 2), + 1 << 2); + else + return ab3100_mask_and_set_register_interruptible(ab3100_data, + AB3100_RTC, ~(1 << 2), + 0); +} + +static const struct rtc_class_ops ab3100_rtc_ops = { + .read_time = ab3100_rtc_read_time, + .set_mmss = ab3100_rtc_set_mmss, + .read_alarm = ab3100_rtc_read_alarm, + .set_alarm = ab3100_rtc_set_alarm, + .alarm_irq_enable = ab3100_rtc_irq_enable, +}; + +static int __init ab3100_rtc_probe(struct platform_device *pdev) +{ + int err; + u8 regval; + struct rtc_device *rtc; + struct ab3100 *ab3100_data = platform_get_drvdata(pdev); + + /* The first RTC register needs special treatment */ + err = ab3100_get_register_interruptible(ab3100_data, + AB3100_RTC, ®val); + if (err) { + dev_err(&pdev->dev, "unable to read RTC register\n"); + return -ENODEV; + } + + if ((regval & 0xFE) != RTC_SETTING) { + dev_warn(&pdev->dev, "not default value in RTC reg 0x%x\n", + regval); + } + + if ((regval & 1) == 0) { + /* + * Set bit to detect power loss. + * This bit remains until RTC power is lost. + */ + regval = 1 | RTC_SETTING; + err = ab3100_set_register_interruptible(ab3100_data, + AB3100_RTC, regval); + /* Ignore any error on this write */ + } + + rtc = rtc_device_register("ab3100-rtc", &pdev->dev, &ab3100_rtc_ops, + THIS_MODULE); + if (IS_ERR(rtc)) { + err = PTR_ERR(rtc); + return err; + } + + return 0; +} + +static int __exit ab3100_rtc_remove(struct platform_device *pdev) +{ + struct rtc_device *rtc = platform_get_drvdata(pdev); + + rtc_device_unregister(rtc); + return 0; +} + +static struct platform_driver ab3100_rtc_driver = { + .driver = { + .name = "ab3100-rtc", + .owner = THIS_MODULE, + }, + .remove = __exit_p(ab3100_rtc_remove), +}; + +static int __init ab3100_rtc_init(void) +{ + return platform_driver_probe(&ab3100_rtc_driver, + ab3100_rtc_probe); +} + +static void __exit ab3100_rtc_exit(void) +{ + platform_driver_unregister(&ab3100_rtc_driver); +} + +module_init(ab3100_rtc_init); +module_exit(ab3100_rtc_exit); + +MODULE_AUTHOR("Linus Walleij <linus.walleij@stericsson.com>"); +MODULE_DESCRIPTION("AB3100 RTC Driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/rtc/rtc-wm831x.c b/drivers/rtc/rtc-wm831x.c new file mode 100644 index 00000000000..79795cdf6ed --- /dev/null +++ b/drivers/rtc/rtc-wm831x.c @@ -0,0 +1,523 @@ +/* + * Real Time Clock driver for Wolfson Microelectronics WM831x + * + * Copyright (C) 2009 Wolfson Microelectronics PLC. + * + * Author: Mark Brown <broonie@opensource.wolfsonmicro.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/time.h> +#include <linux/rtc.h> +#include <linux/bcd.h> +#include <linux/interrupt.h> +#include <linux/ioctl.h> +#include <linux/completion.h> +#include <linux/mfd/wm831x/core.h> +#include <linux/delay.h> +#include <linux/platform_device.h> + + +/* + * R16416 (0x4020) - RTC Write Counter + */ +#define WM831X_RTC_WR_CNT_MASK 0xFFFF /* RTC_WR_CNT - [15:0] */ +#define WM831X_RTC_WR_CNT_SHIFT 0 /* RTC_WR_CNT - [15:0] */ +#define WM831X_RTC_WR_CNT_WIDTH 16 /* RTC_WR_CNT - [15:0] */ + +/* + * R16417 (0x4021) - RTC Time 1 + */ +#define WM831X_RTC_TIME_MASK 0xFFFF /* RTC_TIME - [15:0] */ +#define WM831X_RTC_TIME_SHIFT 0 /* RTC_TIME - [15:0] */ +#define WM831X_RTC_TIME_WIDTH 16 /* RTC_TIME - [15:0] */ + +/* + * R16418 (0x4022) - RTC Time 2 + */ +#define WM831X_RTC_TIME_MASK 0xFFFF /* RTC_TIME - [15:0] */ +#define WM831X_RTC_TIME_SHIFT 0 /* RTC_TIME - [15:0] */ +#define WM831X_RTC_TIME_WIDTH 16 /* RTC_TIME - [15:0] */ + +/* + * R16419 (0x4023) - RTC Alarm 1 + */ +#define WM831X_RTC_ALM_MASK 0xFFFF /* RTC_ALM - [15:0] */ +#define WM831X_RTC_ALM_SHIFT 0 /* RTC_ALM - [15:0] */ +#define WM831X_RTC_ALM_WIDTH 16 /* RTC_ALM - [15:0] */ + +/* + * R16420 (0x4024) - RTC Alarm 2 + */ +#define WM831X_RTC_ALM_MASK 0xFFFF /* RTC_ALM - [15:0] */ +#define WM831X_RTC_ALM_SHIFT 0 /* RTC_ALM - [15:0] */ +#define WM831X_RTC_ALM_WIDTH 16 /* RTC_ALM - [15:0] */ + +/* + * R16421 (0x4025) - RTC Control + */ +#define WM831X_RTC_VALID 0x8000 /* RTC_VALID */ +#define WM831X_RTC_VALID_MASK 0x8000 /* RTC_VALID */ +#define WM831X_RTC_VALID_SHIFT 15 /* RTC_VALID */ +#define WM831X_RTC_VALID_WIDTH 1 /* RTC_VALID */ +#define WM831X_RTC_SYNC_BUSY 0x4000 /* RTC_SYNC_BUSY */ +#define WM831X_RTC_SYNC_BUSY_MASK 0x4000 /* RTC_SYNC_BUSY */ +#define WM831X_RTC_SYNC_BUSY_SHIFT 14 /* RTC_SYNC_BUSY */ +#define WM831X_RTC_SYNC_BUSY_WIDTH 1 /* RTC_SYNC_BUSY */ +#define WM831X_RTC_ALM_ENA 0x0400 /* RTC_ALM_ENA */ +#define WM831X_RTC_ALM_ENA_MASK 0x0400 /* RTC_ALM_ENA */ +#define WM831X_RTC_ALM_ENA_SHIFT 10 /* RTC_ALM_ENA */ +#define WM831X_RTC_ALM_ENA_WIDTH 1 /* RTC_ALM_ENA */ +#define WM831X_RTC_PINT_FREQ_MASK 0x0070 /* RTC_PINT_FREQ - [6:4] */ +#define WM831X_RTC_PINT_FREQ_SHIFT 4 /* RTC_PINT_FREQ - [6:4] */ +#define WM831X_RTC_PINT_FREQ_WIDTH 3 /* RTC_PINT_FREQ - [6:4] */ + +/* + * R16422 (0x4026) - RTC Trim + */ +#define WM831X_RTC_TRIM_MASK 0x03FF /* RTC_TRIM - [9:0] */ +#define WM831X_RTC_TRIM_SHIFT 0 /* RTC_TRIM - [9:0] */ +#define WM831X_RTC_TRIM_WIDTH 10 /* RTC_TRIM - [9:0] */ + +#define WM831X_SET_TIME_RETRIES 5 +#define WM831X_GET_TIME_RETRIES 5 + +struct wm831x_rtc { + struct wm831x *wm831x; + struct rtc_device *rtc; + unsigned int alarm_enabled:1; +}; + +/* + * Read current time and date in RTC + */ +static int wm831x_rtc_readtime(struct device *dev, struct rtc_time *tm) +{ + struct wm831x_rtc *wm831x_rtc = dev_get_drvdata(dev); + struct wm831x *wm831x = wm831x_rtc->wm831x; + u16 time1[2], time2[2]; + int ret; + int count = 0; + + /* Has the RTC been programmed? */ + ret = wm831x_reg_read(wm831x, WM831X_RTC_CONTROL); + if (ret < 0) { + dev_err(dev, "Failed to read RTC control: %d\n", ret); + return ret; + } + if (!(ret & WM831X_RTC_VALID)) { + dev_dbg(dev, "RTC not yet configured\n"); + return -EINVAL; + } + + /* Read twice to make sure we don't read a corrupt, partially + * incremented, value. + */ + do { + ret = wm831x_bulk_read(wm831x, WM831X_RTC_TIME_1, + 2, time1); + if (ret != 0) + continue; + + ret = wm831x_bulk_read(wm831x, WM831X_RTC_TIME_1, + 2, time2); + if (ret != 0) + continue; + + if (memcmp(time1, time2, sizeof(time1)) == 0) { + u32 time = (time1[0] << 16) | time1[1]; + + rtc_time_to_tm(time, tm); + return rtc_valid_tm(tm); + } + + } while (++count < WM831X_GET_TIME_RETRIES); + + dev_err(dev, "Timed out reading current time\n"); + + return -EIO; +} + +/* + * Set current time and date in RTC + */ +static int wm831x_rtc_set_mmss(struct device *dev, unsigned long time) +{ + struct wm831x_rtc *wm831x_rtc = dev_get_drvdata(dev); + struct wm831x *wm831x = wm831x_rtc->wm831x; + struct rtc_time new_tm; + unsigned long new_time; + int ret; + int count = 0; + + ret = wm831x_reg_write(wm831x, WM831X_RTC_TIME_1, + (time >> 16) & 0xffff); + if (ret < 0) { + dev_err(dev, "Failed to write TIME_1: %d\n", ret); + return ret; + } + + ret = wm831x_reg_write(wm831x, WM831X_RTC_TIME_2, time & 0xffff); + if (ret < 0) { + dev_err(dev, "Failed to write TIME_2: %d\n", ret); + return ret; + } + + /* Wait for the update to complete - should happen first time + * round but be conservative. + */ + do { + msleep(1); + + ret = wm831x_reg_read(wm831x, WM831X_RTC_CONTROL); + if (ret < 0) + ret = WM831X_RTC_SYNC_BUSY; + } while (!(ret & WM831X_RTC_SYNC_BUSY) && + ++count < WM831X_SET_TIME_RETRIES); + + if (ret & WM831X_RTC_SYNC_BUSY) { + dev_err(dev, "Timed out writing RTC update\n"); + return -EIO; + } + + /* Check that the update was accepted; security features may + * have caused the update to be ignored. + */ + ret = wm831x_rtc_readtime(dev, &new_tm); + if (ret < 0) + return ret; + + ret = rtc_tm_to_time(&new_tm, &new_time); + if (ret < 0) { + dev_err(dev, "Failed to convert time: %d\n", ret); + return ret; + } + + /* Allow a second of change in case of tick */ + if (new_time - time > 1) { + dev_err(dev, "RTC update not permitted by hardware\n"); + return -EPERM; + } + + return 0; +} + +/* + * Read alarm time and date in RTC + */ +static int wm831x_rtc_readalarm(struct device *dev, struct rtc_wkalrm *alrm) +{ + struct wm831x_rtc *wm831x_rtc = dev_get_drvdata(dev); + int ret; + u16 data[2]; + u32 time; + + ret = wm831x_bulk_read(wm831x_rtc->wm831x, WM831X_RTC_ALARM_1, + 2, data); + if (ret != 0) { + dev_err(dev, "Failed to read alarm time: %d\n", ret); + return ret; + } + + time = (data[0] << 16) | data[1]; + + rtc_time_to_tm(time, &alrm->time); + + ret = wm831x_reg_read(wm831x_rtc->wm831x, WM831X_RTC_CONTROL); + if (ret < 0) { + dev_err(dev, "Failed to read RTC control: %d\n", ret); + return ret; + } + + if (ret & WM831X_RTC_ALM_ENA) + alrm->enabled = 1; + else + alrm->enabled = 0; + + return 0; +} + +static int wm831x_rtc_stop_alarm(struct wm831x_rtc *wm831x_rtc) +{ + wm831x_rtc->alarm_enabled = 0; + + return wm831x_set_bits(wm831x_rtc->wm831x, WM831X_RTC_CONTROL, + WM831X_RTC_ALM_ENA, 0); +} + +static int wm831x_rtc_start_alarm(struct wm831x_rtc *wm831x_rtc) +{ + wm831x_rtc->alarm_enabled = 1; + + return wm831x_set_bits(wm831x_rtc->wm831x, WM831X_RTC_CONTROL, + WM831X_RTC_ALM_ENA, WM831X_RTC_ALM_ENA); +} + +static int wm831x_rtc_setalarm(struct device *dev, struct rtc_wkalrm *alrm) +{ + struct wm831x_rtc *wm831x_rtc = dev_get_drvdata(dev); + struct wm831x *wm831x = wm831x_rtc->wm831x; + int ret; + unsigned long time; + + ret = rtc_tm_to_time(&alrm->time, &time); + if (ret < 0) { + dev_err(dev, "Failed to convert time: %d\n", ret); + return ret; + } + + ret = wm831x_rtc_stop_alarm(wm831x_rtc); + if (ret < 0) { + dev_err(dev, "Failed to stop alarm: %d\n", ret); + return ret; + } + + ret = wm831x_reg_write(wm831x, WM831X_RTC_ALARM_1, + (time >> 16) & 0xffff); + if (ret < 0) { + dev_err(dev, "Failed to write ALARM_1: %d\n", ret); + return ret; + } + + ret = wm831x_reg_write(wm831x, WM831X_RTC_ALARM_2, time & 0xffff); + if (ret < 0) { + dev_err(dev, "Failed to write ALARM_2: %d\n", ret); + return ret; + } + + if (alrm->enabled) { + ret = wm831x_rtc_start_alarm(wm831x_rtc); + if (ret < 0) { + dev_err(dev, "Failed to start alarm: %d\n", ret); + return ret; + } + } + + return 0; +} + +static int wm831x_rtc_alarm_irq_enable(struct device *dev, + unsigned int enabled) +{ + struct wm831x_rtc *wm831x_rtc = dev_get_drvdata(dev); + + if (enabled) + return wm831x_rtc_start_alarm(wm831x_rtc); + else + return wm831x_rtc_stop_alarm(wm831x_rtc); +} + +static int wm831x_rtc_update_irq_enable(struct device *dev, + unsigned int enabled) +{ + struct wm831x_rtc *wm831x_rtc = dev_get_drvdata(dev); + int val; + + if (enabled) + val = 1 << WM831X_RTC_PINT_FREQ_SHIFT; + else + val = 0; + + return wm831x_set_bits(wm831x_rtc->wm831x, WM831X_RTC_CONTROL, + WM831X_RTC_PINT_FREQ_MASK, val); +} + +static irqreturn_t wm831x_alm_irq(int irq, void *data) +{ + struct wm831x_rtc *wm831x_rtc = data; + + rtc_update_irq(wm831x_rtc->rtc, 1, RTC_IRQF | RTC_AF); + + return IRQ_HANDLED; +} + +static irqreturn_t wm831x_per_irq(int irq, void *data) +{ + struct wm831x_rtc *wm831x_rtc = data; + + rtc_update_irq(wm831x_rtc->rtc, 1, RTC_IRQF | RTC_UF); + + return IRQ_HANDLED; +} + +static const struct rtc_class_ops wm831x_rtc_ops = { + .read_time = wm831x_rtc_readtime, + .set_mmss = wm831x_rtc_set_mmss, + .read_alarm = wm831x_rtc_readalarm, + .set_alarm = wm831x_rtc_setalarm, + .alarm_irq_enable = wm831x_rtc_alarm_irq_enable, + .update_irq_enable = wm831x_rtc_update_irq_enable, +}; + +#ifdef CONFIG_PM +/* Turn off the alarm if it should not be a wake source. */ +static int wm831x_rtc_suspend(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct wm831x_rtc *wm831x_rtc = dev_get_drvdata(&pdev->dev); + int ret, enable; + + if (wm831x_rtc->alarm_enabled && device_may_wakeup(&pdev->dev)) + enable = WM831X_RTC_ALM_ENA; + else + enable = 0; + + ret = wm831x_set_bits(wm831x_rtc->wm831x, WM831X_RTC_CONTROL, + WM831X_RTC_ALM_ENA, enable); + if (ret != 0) + dev_err(&pdev->dev, "Failed to update RTC alarm: %d\n", ret); + + return 0; +} + +/* Enable the alarm if it should be enabled (in case it was disabled to + * prevent use as a wake source). + */ +static int wm831x_rtc_resume(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct wm831x_rtc *wm831x_rtc = dev_get_drvdata(&pdev->dev); + int ret; + + if (wm831x_rtc->alarm_enabled) { + ret = wm831x_rtc_start_alarm(wm831x_rtc); + if (ret != 0) + dev_err(&pdev->dev, + "Failed to restart RTC alarm: %d\n", ret); + } + + return 0; +} + +/* Unconditionally disable the alarm */ +static int wm831x_rtc_freeze(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct wm831x_rtc *wm831x_rtc = dev_get_drvdata(&pdev->dev); + int ret; + + ret = wm831x_set_bits(wm831x_rtc->wm831x, WM831X_RTC_CONTROL, + WM831X_RTC_ALM_ENA, 0); + if (ret != 0) + dev_err(&pdev->dev, "Failed to stop RTC alarm: %d\n", ret); + + return 0; +} +#else +#define wm831x_rtc_suspend NULL +#define wm831x_rtc_resume NULL +#define wm831x_rtc_freeze NULL +#endif + +static int wm831x_rtc_probe(struct platform_device *pdev) +{ + struct wm831x *wm831x = dev_get_drvdata(pdev->dev.parent); + struct wm831x_rtc *wm831x_rtc; + int per_irq = platform_get_irq_byname(pdev, "PER"); + int alm_irq = platform_get_irq_byname(pdev, "ALM"); + int ret = 0; + + wm831x_rtc = kzalloc(sizeof(*wm831x_rtc), GFP_KERNEL); + if (wm831x_rtc == NULL) + return -ENOMEM; + + platform_set_drvdata(pdev, wm831x_rtc); + wm831x_rtc->wm831x = wm831x; + + ret = wm831x_reg_read(wm831x, WM831X_RTC_CONTROL); + if (ret < 0) { + dev_err(&pdev->dev, "Failed to read RTC control: %d\n", ret); + goto err; + } + if (ret & WM831X_RTC_ALM_ENA) + wm831x_rtc->alarm_enabled = 1; + + device_init_wakeup(&pdev->dev, 1); + + wm831x_rtc->rtc = rtc_device_register("wm831x", &pdev->dev, + &wm831x_rtc_ops, THIS_MODULE); + if (IS_ERR(wm831x_rtc->rtc)) { + ret = PTR_ERR(wm831x_rtc->rtc); + goto err; + } + + ret = wm831x_request_irq(wm831x, per_irq, wm831x_per_irq, + IRQF_TRIGGER_RISING, "wm831x_rtc_per", + wm831x_rtc); + if (ret != 0) { + dev_err(&pdev->dev, "Failed to request periodic IRQ %d: %d\n", + per_irq, ret); + } + + ret = wm831x_request_irq(wm831x, alm_irq, wm831x_alm_irq, + IRQF_TRIGGER_RISING, "wm831x_rtc_alm", + wm831x_rtc); + if (ret != 0) { + dev_err(&pdev->dev, "Failed to request alarm IRQ %d: %d\n", + alm_irq, ret); + } + + return 0; + +err: + kfree(wm831x_rtc); + return ret; +} + +static int __devexit wm831x_rtc_remove(struct platform_device *pdev) +{ + struct wm831x_rtc *wm831x_rtc = platform_get_drvdata(pdev); + int per_irq = platform_get_irq_byname(pdev, "PER"); + int alm_irq = platform_get_irq_byname(pdev, "ALM"); + + wm831x_free_irq(wm831x_rtc->wm831x, alm_irq, wm831x_rtc); + wm831x_free_irq(wm831x_rtc->wm831x, per_irq, wm831x_rtc); + rtc_device_unregister(wm831x_rtc->rtc); + kfree(wm831x_rtc); + + return 0; +} + +static struct dev_pm_ops wm831x_rtc_pm_ops = { + .suspend = wm831x_rtc_suspend, + .resume = wm831x_rtc_resume, + + .freeze = wm831x_rtc_freeze, + .thaw = wm831x_rtc_resume, + .restore = wm831x_rtc_resume, + + .poweroff = wm831x_rtc_suspend, +}; + +static struct platform_driver wm831x_rtc_driver = { + .probe = wm831x_rtc_probe, + .remove = __devexit_p(wm831x_rtc_remove), + .driver = { + .name = "wm831x-rtc", + .pm = &wm831x_rtc_pm_ops, + }, +}; + +static int __init wm831x_rtc_init(void) +{ + return platform_driver_register(&wm831x_rtc_driver); +} +module_init(wm831x_rtc_init); + +static void __exit wm831x_rtc_exit(void) +{ + platform_driver_unregister(&wm831x_rtc_driver); +} +module_exit(wm831x_rtc_exit); + +MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>"); +MODULE_DESCRIPTION("RTC driver for the WM831x series PMICs"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:wm831x-rtc"); |