aboutsummaryrefslogtreecommitdiff
path: root/drivers
diff options
context:
space:
mode:
Diffstat (limited to 'drivers')
-rw-r--r--drivers/ide/Kconfig8
-rw-r--r--drivers/ide/Makefile1
-rw-r--r--drivers/ide/ppc/scc_pata.c812
3 files changed, 821 insertions, 0 deletions
diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig
index ec03341d2bd..350764ece7f 100644
--- a/drivers/ide/Kconfig
+++ b/drivers/ide/Kconfig
@@ -797,6 +797,14 @@ config BLK_DEV_IDEDMA_PMAC
to transfer data to and from memory. Saying Y is safe and improves
performance.
+config BLK_DEV_IDE_CELLEB
+ bool "Toshiba's Cell Reference Set IDE support"
+ depends on PPC_CELLEB
+ help
+ This driver provides support for the built-in IDE controller on
+ Toshiba Cell Reference Board.
+ If unsure, say Y.
+
config BLK_DEV_IDE_SWARM
tristate "IDE for Sibyte evaluation boards"
depends on SIBYTE_SB1xxx_SOC
diff --git a/drivers/ide/Makefile b/drivers/ide/Makefile
index d9f029e8ff7..28feedfbd21 100644
--- a/drivers/ide/Makefile
+++ b/drivers/ide/Makefile
@@ -37,6 +37,7 @@ ide-core-$(CONFIG_BLK_DEV_Q40IDE) += legacy/q40ide.o
# built-in only drivers from ppc/
ide-core-$(CONFIG_BLK_DEV_MPC8xx_IDE) += ppc/mpc8xx.o
ide-core-$(CONFIG_BLK_DEV_IDE_PMAC) += ppc/pmac.o
+ide-core-$(CONFIG_BLK_DEV_IDE_CELLEB) += ppc/scc_pata.o
# built-in only drivers from h8300/
ide-core-$(CONFIG_H8300) += h8300/ide-h8300.o
diff --git a/drivers/ide/ppc/scc_pata.c b/drivers/ide/ppc/scc_pata.c
new file mode 100644
index 00000000000..3993d08312d
--- /dev/null
+++ b/drivers/ide/ppc/scc_pata.c
@@ -0,0 +1,812 @@
+/*
+ * Support for IDE interfaces on Celleb platform
+ *
+ * (C) Copyright 2006 TOSHIBA CORPORATION
+ *
+ * This code is based on drivers/ide/pci/siimage.c:
+ * Copyright (C) 2001-2002 Andre Hedrick <andre@linux-ide.org>
+ * Copyright (C) 2003 Red Hat <alan@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+#include <linux/types.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include <linux/hdreg.h>
+#include <linux/ide.h>
+#include <linux/init.h>
+
+#define PCI_DEVICE_ID_TOSHIBA_SCC_ATA 0x01b4
+
+#define SCC_PATA_NAME "scc IDE"
+
+#define TDVHSEL_MASTER 0x00000001
+#define TDVHSEL_SLAVE 0x00000004
+
+#define MODE_JCUSFEN 0x00000080
+
+#define CCKCTRL_ATARESET 0x00040000
+#define CCKCTRL_BUFCNT 0x00020000
+#define CCKCTRL_CRST 0x00010000
+#define CCKCTRL_OCLKEN 0x00000100
+#define CCKCTRL_ATACLKOEN 0x00000002
+#define CCKCTRL_LCLKEN 0x00000001
+
+#define QCHCD_IOS_SS 0x00000001
+
+#define QCHSD_STPDIAG 0x00020000
+
+#define INTMASK_MSK 0xD1000012
+#define INTSTS_SERROR 0x80000000
+#define INTSTS_PRERR 0x40000000
+#define INTSTS_RERR 0x10000000
+#define INTSTS_ICERR 0x01000000
+#define INTSTS_BMSINT 0x00000010
+#define INTSTS_BMHE 0x00000008
+#define INTSTS_IOIRQS 0x00000004
+#define INTSTS_INTRQ 0x00000002
+#define INTSTS_ACTEINT 0x00000001
+
+#define ECMODE_VALUE 0x01
+
+static struct scc_ports {
+ unsigned long ctl, dma;
+ unsigned char hwif_id; /* for removing hwif from system */
+} scc_ports[MAX_HWIFS];
+
+/* PIO transfer mode table */
+/* JCHST */
+static unsigned long JCHSTtbl[2][7] = {
+ {0x0E, 0x05, 0x02, 0x03, 0x02, 0x00, 0x00}, /* 100MHz */
+ {0x13, 0x07, 0x04, 0x04, 0x03, 0x00, 0x00} /* 133MHz */
+};
+
+/* JCHHT */
+static unsigned long JCHHTtbl[2][7] = {
+ {0x0E, 0x02, 0x02, 0x02, 0x02, 0x00, 0x00}, /* 100MHz */
+ {0x13, 0x03, 0x03, 0x03, 0x03, 0x00, 0x00} /* 133MHz */
+};
+
+/* JCHCT */
+static unsigned long JCHCTtbl[2][7] = {
+ {0x1D, 0x1D, 0x1C, 0x0B, 0x06, 0x00, 0x00}, /* 100MHz */
+ {0x27, 0x26, 0x26, 0x0E, 0x09, 0x00, 0x00} /* 133MHz */
+};
+
+
+/* DMA transfer mode table */
+/* JCHDCTM/JCHDCTS */
+static unsigned long JCHDCTxtbl[2][7] = {
+ {0x0A, 0x06, 0x04, 0x03, 0x01, 0x00, 0x00}, /* 100MHz */
+ {0x0E, 0x09, 0x06, 0x04, 0x02, 0x01, 0x00} /* 133MHz */
+};
+
+/* JCSTWTM/JCSTWTS */
+static unsigned long JCSTWTxtbl[2][7] = {
+ {0x06, 0x04, 0x03, 0x02, 0x02, 0x02, 0x00}, /* 100MHz */
+ {0x09, 0x06, 0x04, 0x02, 0x02, 0x02, 0x02} /* 133MHz */
+};
+
+/* JCTSS */
+static unsigned long JCTSStbl[2][7] = {
+ {0x05, 0x05, 0x05, 0x05, 0x05, 0x05, 0x00}, /* 100MHz */
+ {0x05, 0x05, 0x05, 0x05, 0x05, 0x05, 0x05} /* 133MHz */
+};
+
+/* JCENVT */
+static unsigned long JCENVTtbl[2][7] = {
+ {0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x00}, /* 100MHz */
+ {0x02, 0x02, 0x02, 0x02, 0x02, 0x02, 0x02} /* 133MHz */
+};
+
+/* JCACTSELS/JCACTSELM */
+static unsigned long JCACTSELtbl[2][7] = {
+ {0x00, 0x00, 0x00, 0x00, 0x01, 0x01, 0x00}, /* 100MHz */
+ {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01} /* 133MHz */
+};
+
+
+static u8 scc_ide_inb(unsigned long port)
+{
+ u32 data = in_be32((void*)port);
+ return (u8)data;
+}
+
+static u16 scc_ide_inw(unsigned long port)
+{
+ u32 data = in_be32((void*)port);
+ return (u16)data;
+}
+
+static u32 scc_ide_inl(unsigned long port)
+{
+ u32 data = in_be32((void*)port);
+ return data;
+}
+
+static void scc_ide_insw(unsigned long port, void *addr, u32 count)
+{
+ u16 *ptr = (u16 *)addr;
+ while (count--) {
+ *ptr++ = le16_to_cpu(in_be32((void*)port));
+ }
+}
+
+static void scc_ide_insl(unsigned long port, void *addr, u32 count)
+{
+ u16 *ptr = (u16 *)addr;
+ while (count--) {
+ *ptr++ = le16_to_cpu(in_be32((void*)port));
+ *ptr++ = le16_to_cpu(in_be32((void*)port));
+ }
+}
+
+static void scc_ide_outb(u8 addr, unsigned long port)
+{
+ out_be32((void*)port, addr);
+}
+
+static void scc_ide_outw(u16 addr, unsigned long port)
+{
+ out_be32((void*)port, addr);
+}
+
+static void scc_ide_outl(u32 addr, unsigned long port)
+{
+ out_be32((void*)port, addr);
+}
+
+static void
+scc_ide_outbsync(ide_drive_t * drive, u8 addr, unsigned long port)
+{
+ ide_hwif_t *hwif = HWIF(drive);
+
+ out_be32((void*)port, addr);
+ __asm__ __volatile__("eieio":::"memory");
+ in_be32((void*)(hwif->dma_base + 0x01c));
+ __asm__ __volatile__("eieio":::"memory");
+}
+
+static void
+scc_ide_outsw(unsigned long port, void *addr, u32 count)
+{
+ u16 *ptr = (u16 *)addr;
+ while (count--) {
+ out_be32((void*)port, cpu_to_le16(*ptr++));
+ }
+}
+
+static void
+scc_ide_outsl(unsigned long port, void *addr, u32 count)
+{
+ u16 *ptr = (u16 *)addr;
+ while (count--) {
+ out_be32((void*)port, cpu_to_le16(*ptr++));
+ out_be32((void*)port, cpu_to_le16(*ptr++));
+ }
+}
+
+/**
+ * scc_ratemask - Compute available modes
+ * @drive: IDE drive
+ *
+ * Compute the available speeds for the devices on the interface.
+ * Enforce UDMA33 as a limit if there is no 80pin cable present.
+ */
+
+static u8 scc_ratemask(ide_drive_t *drive)
+{
+ u8 mode = 4;
+
+ if (!eighty_ninty_three(drive))
+ mode = min(mode, (u8)1);
+ return mode;
+}
+
+/**
+ * scc_tuneproc - tune a drive PIO mode
+ * @drive: drive to tune
+ * @mode_wanted: the target operating mode
+ *
+ * Load the timing settings for this device mode into the
+ * controller.
+ */
+
+static void scc_tuneproc(ide_drive_t *drive, byte mode_wanted)
+{
+ ide_hwif_t *hwif = HWIF(drive);
+ struct scc_ports *ports = ide_get_hwifdata(hwif);
+ unsigned long ctl_base = ports->ctl;
+ unsigned long cckctrl_port = ctl_base + 0xff0;
+ unsigned long piosht_port = ctl_base + 0x000;
+ unsigned long pioct_port = ctl_base + 0x004;
+ unsigned long reg;
+ unsigned char speed = XFER_PIO_0;
+ int offset;
+
+ mode_wanted = ide_get_best_pio_mode(drive, mode_wanted, 4, NULL);
+ switch (mode_wanted) {
+ case 4:
+ speed = XFER_PIO_4;
+ break;
+ case 3:
+ speed = XFER_PIO_3;
+ break;
+ case 2:
+ speed = XFER_PIO_2;
+ break;
+ case 1:
+ speed = XFER_PIO_1;
+ break;
+ case 0:
+ default:
+ speed = XFER_PIO_0;
+ break;
+ }
+
+ reg = hwif->INL(cckctrl_port);
+ if (reg & CCKCTRL_ATACLKOEN) {
+ offset = 1; /* 133MHz */
+ } else {
+ offset = 0; /* 100MHz */
+ }
+ reg = JCHSTtbl[offset][mode_wanted] << 16 | JCHHTtbl[offset][mode_wanted];
+ hwif->OUTL(reg, piosht_port);
+ reg = JCHCTtbl[offset][mode_wanted];
+ hwif->OUTL(reg, pioct_port);
+
+ ide_config_drive_speed(drive, speed);
+}
+
+/**
+ * scc_tune_chipset - tune a drive DMA mode
+ * @drive: Drive to set up
+ * @xferspeed: speed we want to achieve
+ *
+ * Load the timing settings for this device mode into the
+ * controller.
+ */
+
+static int scc_tune_chipset(ide_drive_t *drive, byte xferspeed)
+{
+ ide_hwif_t *hwif = HWIF(drive);
+ u8 speed = ide_rate_filter(scc_ratemask(drive), xferspeed);
+ struct scc_ports *ports = ide_get_hwifdata(hwif);
+ unsigned long ctl_base = ports->ctl;
+ unsigned long cckctrl_port = ctl_base + 0xff0;
+ unsigned long mdmact_port = ctl_base + 0x008;
+ unsigned long mcrcst_port = ctl_base + 0x00c;
+ unsigned long sdmact_port = ctl_base + 0x010;
+ unsigned long scrcst_port = ctl_base + 0x014;
+ unsigned long udenvt_port = ctl_base + 0x018;
+ unsigned long tdvhsel_port = ctl_base + 0x020;
+ int is_slave = (&hwif->drives[1] == drive);
+ int offset, idx;
+ unsigned long reg;
+ unsigned long jcactsel;
+
+ reg = hwif->INL(cckctrl_port);
+ if (reg & CCKCTRL_ATACLKOEN) {
+ offset = 1; /* 133MHz */
+ } else {
+ offset = 0; /* 100MHz */
+ }
+
+ switch (speed) {
+ case XFER_UDMA_6:
+ idx = 6;
+ break;
+ case XFER_UDMA_5:
+ idx = 5;
+ break;
+ case XFER_UDMA_4:
+ idx = 4;
+ break;
+ case XFER_UDMA_3:
+ idx = 3;
+ break;
+ case XFER_UDMA_2:
+ idx = 2;
+ break;
+ case XFER_UDMA_1:
+ idx = 1;
+ break;
+ case XFER_UDMA_0:
+ idx = 0;
+ break;
+ default:
+ return 1;
+ }
+
+ jcactsel = JCACTSELtbl[offset][idx];
+ if (is_slave) {
+ hwif->OUTL(JCHDCTxtbl[offset][idx], sdmact_port);
+ hwif->OUTL(JCSTWTxtbl[offset][idx], scrcst_port);
+ jcactsel = jcactsel << 2 ;
+ hwif->OUTL( (hwif->INL( tdvhsel_port ) & ~TDVHSEL_SLAVE) | jcactsel, tdvhsel_port );
+ } else {
+ hwif->OUTL(JCHDCTxtbl[offset][idx], mdmact_port);
+ hwif->OUTL(JCSTWTxtbl[offset][idx], mcrcst_port);
+ hwif->OUTL( (hwif->INL( tdvhsel_port ) & ~TDVHSEL_MASTER) | jcactsel, tdvhsel_port );
+ }
+ reg = JCTSStbl[offset][idx] << 16 | JCENVTtbl[offset][idx];
+ hwif->OUTL(reg, udenvt_port);
+
+ return ide_config_drive_speed(drive, speed);
+}
+
+/**
+ * scc_config_chipset_for_dma - configure for DMA
+ * @drive: drive to configure
+ *
+ * Called by scc_config_drive_for_dma().
+ */
+
+static int scc_config_chipset_for_dma(ide_drive_t *drive)
+{
+ u8 speed = ide_dma_speed(drive, scc_ratemask(drive));
+
+ if (!speed)
+ return 0;
+
+ if (ide_set_xfer_rate(drive, speed))
+ return 0;
+
+ if (!drive->init_speed)
+ drive->init_speed = speed;
+
+ return ide_dma_enable(drive);
+}
+
+/**
+ * scc_configure_drive_for_dma - set up for DMA transfers
+ * @drive: drive we are going to set up
+ *
+ * Set up the drive for DMA, tune the controller and drive as
+ * required.
+ * If the drive isn't suitable for DMA or we hit other problems
+ * then we will drop down to PIO and set up PIO appropriately.
+ * (return 1)
+ */
+
+static int scc_config_drive_for_dma(ide_drive_t *drive)
+{
+ ide_hwif_t *hwif = HWIF(drive);
+ struct hd_driveid *id = drive->id;
+
+ if ((id->capability & 1) != 0 && drive->autodma) {
+ if (ide_use_dma(drive)) {
+ if (scc_config_chipset_for_dma(drive))
+ return hwif->ide_dma_on(drive);
+ }
+ goto fast_ata_pio;
+ } else if ((id->capability & 8) || (id->field_valid & 2)) {
+ fast_ata_pio:
+ hwif->tuneproc(drive, 4);
+ hwif->ide_dma_off_quietly(drive);
+ }
+ return 1; /* DMA is not supported */
+}
+
+/**
+ * scc_ide_dma_end - Stop DMA
+ * @drive: IDE drive
+ *
+ * Check and clear INT Status register.
+ * Then call __ide_dma_end().
+ */
+
+static int scc_ide_dma_end(ide_drive_t * drive)
+{
+ ide_hwif_t *hwif = HWIF(drive);
+ unsigned long intsts_port = hwif->dma_base + 0x014;
+ u32 reg;
+
+ while (1) {
+ reg = hwif->INL(intsts_port);
+
+ if (reg & INTSTS_SERROR) {
+ printk(KERN_WARNING "%s: SERROR\n", SCC_PATA_NAME);
+ hwif->OUTL(INTSTS_SERROR|INTSTS_BMSINT, intsts_port);
+
+ hwif->OUTB(hwif->INB(hwif->dma_command) & ~QCHCD_IOS_SS,
+ hwif->dma_command);
+ continue;
+ }
+
+ if (reg & INTSTS_PRERR) {
+ u32 maea0, maec0;
+ unsigned long ctl_base = hwif->config_data;
+
+ maea0 = hwif->INL(ctl_base + 0xF50);
+ maec0 = hwif->INL(ctl_base + 0xF54);
+
+ printk(KERN_WARNING "%s: PRERR [addr:%x cmd:%x]\n", SCC_PATA_NAME, maea0, maec0);
+
+ hwif->OUTL(INTSTS_PRERR|INTSTS_BMSINT, intsts_port);
+
+ hwif->OUTB(hwif->INB(hwif->dma_command) & ~QCHCD_IOS_SS,
+ hwif->dma_command);
+ continue;
+ }
+
+ if (reg & INTSTS_RERR) {
+ printk(KERN_WARNING "%s: Response Error\n", SCC_PATA_NAME);
+ hwif->OUTL(INTSTS_RERR|INTSTS_BMSINT, intsts_port);
+
+ hwif->OUTB(hwif->INB(hwif->dma_command) & ~QCHCD_IOS_SS,
+ hwif->dma_command);
+ continue;
+ }
+
+ if (reg & INTSTS_ICERR) {
+ hwif->OUTB(hwif->INB(hwif->dma_command) & ~QCHCD_IOS_SS,
+ hwif->dma_command);
+
+ printk(KERN_WARNING "%s: Illegal Configuration\n", SCC_PATA_NAME);
+ hwif->OUTL(INTSTS_ICERR|INTSTS_BMSINT, intsts_port);
+ continue;
+ }
+
+ if (reg & INTSTS_BMSINT) {
+ printk(KERN_WARNING "%s: Internal Bus Error\n", SCC_PATA_NAME);
+ hwif->OUTL(INTSTS_BMSINT, intsts_port);
+
+ ide_do_reset(drive);
+ continue;
+ }
+
+ if (reg & INTSTS_BMHE) {
+ hwif->OUTL(INTSTS_BMHE, intsts_port);
+ continue;
+ }
+
+ if (reg & INTSTS_ACTEINT) {
+ hwif->OUTL(INTSTS_ACTEINT, intsts_port);
+ continue;
+ }
+
+ if (reg & INTSTS_IOIRQS) {
+ hwif->OUTL(INTSTS_IOIRQS, intsts_port);
+ continue;
+ }
+ break;
+ }
+
+ return __ide_dma_end(drive);
+}
+
+/**
+ * setup_mmio_scc - map CTRL/BMID region
+ * @dev: PCI device we are configuring
+ * @name: device name
+ *
+ */
+
+static int setup_mmio_scc (struct pci_dev *dev, const char *name)
+{
+ unsigned long ctl_base = pci_resource_start(dev, 0);
+ unsigned long dma_base = pci_resource_start(dev, 1);
+ unsigned long ctl_size = pci_resource_len(dev, 0);
+ unsigned long dma_size = pci_resource_len(dev, 1);
+ void *ctl_addr;
+ void *dma_addr;
+ int i;
+
+ for (i = 0; i < MAX_HWIFS; i++) {
+ if (scc_ports[i].ctl == 0)
+ break;
+ }
+ if (i >= MAX_HWIFS)
+ return -ENOMEM;
+
+ if (!request_mem_region(ctl_base, ctl_size, name)) {
+ printk(KERN_WARNING "%s: IDE controller MMIO ports not available.\n", SCC_PATA_NAME);
+ goto fail_0;
+ }
+
+ if (!request_mem_region(dma_base, dma_size, name)) {
+ printk(KERN_WARNING "%s: IDE controller MMIO ports not available.\n", SCC_PATA_NAME);
+ goto fail_1;
+ }
+
+ if ((ctl_addr = ioremap(ctl_base, ctl_size)) == NULL)
+ goto fail_2;
+
+ if ((dma_addr = ioremap(dma_base, dma_size)) == NULL)
+ goto fail_3;
+
+ pci_set_master(dev);
+ scc_ports[i].ctl = (unsigned long)ctl_addr;
+ scc_ports[i].dma = (unsigned long)dma_addr;
+ pci_set_drvdata(dev, (void *) &scc_ports[i]);
+
+ return 1;
+
+ fail_3:
+ iounmap(ctl_addr);
+ fail_2:
+ release_mem_region(dma_base, dma_size);
+ fail_1:
+ release_mem_region(ctl_base, ctl_size);
+ fail_0:
+ return -ENOMEM;
+}
+
+/**
+ * init_setup_scc - set up an SCC PATA Controller
+ * @dev: PCI device
+ * @d: IDE PCI device
+ *
+ * Perform the initial set up for this device.
+ */
+
+static int __devinit init_setup_scc(struct pci_dev *dev, ide_pci_device_t *d)
+{
+ unsigned long ctl_base;
+ unsigned long dma_base;
+ unsigned long cckctrl_port;
+ unsigned long intmask_port;
+ unsigned long mode_port;
+ unsigned long ecmode_port;
+ unsigned long dma_status_port;
+ u32 reg = 0;
+ struct scc_ports *ports;
+ int rc;
+
+ rc = setup_mmio_scc(dev, d->name);
+ if (rc < 0) {
+ return rc;
+ }
+
+ ports = pci_get_drvdata(dev);
+ ctl_base = ports->ctl;
+ dma_base = ports->dma;
+ cckctrl_port = ctl_base + 0xff0;
+ intmask_port = dma_base + 0x010;
+ mode_port = ctl_base + 0x024;
+ ecmode_port = ctl_base + 0xf00;
+ dma_status_port = dma_base + 0x004;
+
+ /* controller initialization */
+ reg = 0;
+ out_be32((void*)cckctrl_port, reg);
+ reg |= CCKCTRL_ATACLKOEN;
+ out_be32((void*)cckctrl_port, reg);
+ reg |= CCKCTRL_LCLKEN | CCKCTRL_OCLKEN;
+ out_be32((void*)cckctrl_port, reg);
+ reg |= CCKCTRL_CRST;
+ out_be32((void*)cckctrl_port, reg);
+
+ for (;;) {
+ reg = in_be32((void*)cckctrl_port);
+ if (reg & CCKCTRL_CRST)
+ break;
+ udelay(5000);
+ }
+
+ reg |= CCKCTRL_ATARESET;
+ out_be32((void*)cckctrl_port, reg);
+
+ out_be32((void*)ecmode_port, ECMODE_VALUE);
+ out_be32((void*)mode_port, MODE_JCUSFEN);
+ out_be32((void*)intmask_port, INTMASK_MSK);
+
+ return ide_setup_pci_device(dev, d);
+}
+
+/**
+ * init_mmio_iops_scc - set up the iops for MMIO
+ * @hwif: interface to set up
+ *
+ */
+
+static void __devinit init_mmio_iops_scc(ide_hwif_t *hwif)
+{
+ struct pci_dev *dev = hwif->pci_dev;
+ struct scc_ports *ports = pci_get_drvdata(dev);
+ unsigned long dma_base = ports->dma;
+
+ ide_set_hwifdata(hwif, ports);
+
+ hwif->INB = scc_ide_inb;
+ hwif->INW = scc_ide_inw;
+ hwif->INL = scc_ide_inl;
+ hwif->INSW = scc_ide_insw;
+ hwif->INSL = scc_ide_insl;
+ hwif->OUTB = scc_ide_outb;
+ hwif->OUTBSYNC = scc_ide_outbsync;
+ hwif->OUTW = scc_ide_outw;
+ hwif->OUTL = scc_ide_outl;
+ hwif->OUTSW = scc_ide_outsw;
+ hwif->OUTSL = scc_ide_outsl;
+
+ hwif->io_ports[IDE_DATA_OFFSET] = dma_base + 0x20;
+ hwif->io_ports[IDE_ERROR_OFFSET] = dma_base + 0x24;
+ hwif->io_ports[IDE_NSECTOR_OFFSET] = dma_base + 0x28;
+ hwif->io_ports[IDE_SECTOR_OFFSET] = dma_base + 0x2c;
+ hwif->io_ports[IDE_LCYL_OFFSET] = dma_base + 0x30;
+ hwif->io_ports[IDE_HCYL_OFFSET] = dma_base + 0x34;
+ hwif->io_ports[IDE_SELECT_OFFSET] = dma_base + 0x38;
+ hwif->io_ports[IDE_STATUS_OFFSET] = dma_base + 0x3c;
+ hwif->io_ports[IDE_CONTROL_OFFSET] = dma_base + 0x40;
+
+ hwif->irq = hwif->pci_dev->irq;
+ hwif->dma_base = dma_base;
+ hwif->config_data = ports->ctl;
+ hwif->mmio = 2;
+}
+
+/**
+ * init_iops_scc - set up iops
+ * @hwif: interface to set up
+ *
+ * Do the basic setup for the SCC hardware interface
+ * and then do the MMIO setup.
+ */
+
+static void __devinit init_iops_scc(ide_hwif_t *hwif)
+{
+ struct pci_dev *dev = hwif->pci_dev;
+ hwif->hwif_data = NULL;
+ if (pci_get_drvdata(dev) == NULL)
+ return;
+ init_mmio_iops_scc(hwif);
+}
+
+/**
+ * init_hwif_scc - set up hwif
+ * @hwif: interface to set up
+ *
+ * We do the basic set up of the interface structure. The SCC
+ * requires several custom handlers so we override the default
+ * ide DMA handlers appropriately.
+ */
+
+static void __devinit init_hwif_scc(ide_hwif_t *hwif)
+{
+ struct scc_ports *ports = ide_get_hwifdata(hwif);
+
+ ports->hwif_id = hwif->index;
+
+ hwif->dma_command = hwif->dma_base;
+ hwif->dma_status = hwif->dma_base + 0x04;
+ hwif->dma_prdtable = hwif->dma_base + 0x08;
+
+ hwif->OUTL(hwif->dmatable_dma, (hwif->dma_base + 0x018)); /* PTERADD */
+
+ hwif->ide_dma_end = scc_ide_dma_end;
+ hwif->speedproc = scc_tune_chipset;
+ hwif->tuneproc = scc_tuneproc;
+ hwif->ide_dma_check = scc_config_drive_for_dma;
+
+ hwif->drives[0].autotune = IDE_TUNE_AUTO;
+ hwif->drives[1].autotune = IDE_TUNE_AUTO;
+
+ if (hwif->INL(hwif->config_data + 0xff0) & CCKCTRL_ATACLKOEN) {
+ hwif->ultra_mask = 0x7f; /* 133MHz */
+ } else {
+ hwif->ultra_mask = 0x3f; /* 100MHz */
+ }
+ hwif->mwdma_mask = 0x00;
+ hwif->swdma_mask = 0x00;
+ hwif->atapi_dma = 1;
+
+ /* we support 80c cable only. */
+ hwif->udma_four = 1;
+
+ hwif->autodma = 0;
+ if (!noautodma)
+ hwif->autodma = 1;
+ hwif->drives[0].autodma = hwif->autodma;
+ hwif->drives[1].autodma = hwif->autodma;
+}
+
+#define DECLARE_SCC_DEV(name_str) \
+ { \
+ .name = name_str, \
+ .init_setup = init_setup_scc, \
+ .init_iops = init_iops_scc, \
+ .init_hwif = init_hwif_scc, \
+ .channels = 1, \
+ .autodma = AUTODMA, \
+ .bootable = ON_BOARD, \
+ }
+
+static ide_pci_device_t scc_chipsets[] __devinitdata = {
+ /* 0 */ DECLARE_SCC_DEV("sccIDE"),
+};
+
+/**
+ * scc_init_one - pci layer discovery entry
+ * @dev: PCI device
+ * @id: ident table entry
+ *
+ * Called by the PCI code when it finds an SCC PATA controller.
+ * We then use the IDE PCI generic helper to do most of the work.
+ */
+
+static int __devinit scc_init_one(struct pci_dev *dev, const struct pci_device_id *id)
+{
+ ide_pci_device_t *d = &scc_chipsets[id->driver_data];
+ return d->init_setup(dev, d);
+}
+
+/**
+ * scc_remove - pci layer remove entry
+ * @dev: PCI device
+ *
+ * Called by the PCI code when it removes an SCC PATA controller.
+ */
+
+static void __devexit scc_remove(struct pci_dev *dev)
+{
+ struct scc_ports *ports = pci_get_drvdata(dev);
+ ide_hwif_t *hwif = &ide_hwifs[ports->hwif_id];
+ unsigned long ctl_base = pci_resource_start(dev, 0);
+ unsigned long dma_base = pci_resource_start(dev, 1);
+ unsigned long ctl_size = pci_resource_len(dev, 0);
+ unsigned long dma_size = pci_resource_len(dev, 1);
+
+ if (hwif->dmatable_cpu) {
+ pci_free_consistent(hwif->pci_dev,
+ PRD_ENTRIES * PRD_BYTES,
+ hwif->dmatable_cpu,
+ hwif->dmatable_dma);
+ hwif->dmatable_cpu = NULL;
+ }
+
+ ide_unregister(hwif->index);
+
+ hwif->chipset = ide_unknown;
+ iounmap((void*)ports->dma);
+ iounmap((void*)ports->ctl);
+ release_mem_region(dma_base, dma_size);
+ release_mem_region(ctl_base, ctl_size);
+ memset(ports, 0, sizeof(*ports));
+}
+
+static struct pci_device_id scc_pci_tbl[] = {
+ { PCI_VENDOR_ID_TOSHIBA_2, PCI_DEVICE_ID_TOSHIBA_SCC_ATA, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
+ { 0, },
+};
+MODULE_DEVICE_TABLE(pci, scc_pci_tbl);
+
+static struct pci_driver driver = {
+ .name = "SCC IDE",
+ .id_table = scc_pci_tbl,
+ .probe = scc_init_one,
+ .remove = scc_remove,
+};
+
+static int scc_ide_init(void)
+{
+ return ide_pci_register_driver(&driver);
+}
+
+module_init(scc_ide_init);
+/* -- No exit code?
+static void scc_ide_exit(void)
+{
+ ide_pci_unregister_driver(&driver);
+}
+module_exit(scc_ide_exit);
+ */
+
+
+MODULE_DESCRIPTION("PCI driver module for Toshiba SCC IDE");
+MODULE_LICENSE("GPL");