diff options
Diffstat (limited to 'sound/soc/codecs/wm8903.c')
| -rw-r--r-- | sound/soc/codecs/wm8903.c | 27 |
1 files changed, 25 insertions, 2 deletions
diff --git a/sound/soc/codecs/wm8903.c b/sound/soc/codecs/wm8903.c index e8d2e3e14c4..c9baeae3e27 100644 --- a/sound/soc/codecs/wm8903.c +++ b/sound/soc/codecs/wm8903.c @@ -715,8 +715,6 @@ SOC_ENUM("DAC Soft Mute Rate", soft_mute), SOC_ENUM("DAC Mute Mode", mute_mode), SOC_SINGLE("DAC Mono Switch", WM8903_DAC_DIGITAL_1, 12, 1, 0), SOC_ENUM("DAC De-emphasis", dac_deemphasis), -SOC_SINGLE("DAC Sloping Stopband Filter Switch", - WM8903_DAC_DIGITAL_1, 11, 1, 0), SOC_ENUM("DAC Companding Mode", dac_companding), SOC_SINGLE("DAC Companding Switch", WM8903_AUDIO_INTERFACE_0, 1, 1, 0), @@ -1373,12 +1371,19 @@ static int wm8903_hw_params(struct snd_pcm_substream *substream, u16 aif3 = wm8903_read(codec, WM8903_AUDIO_INTERFACE_3); u16 clock0 = wm8903_read(codec, WM8903_CLOCK_RATES_0); u16 clock1 = wm8903_read(codec, WM8903_CLOCK_RATES_1); + u16 dac_digital1 = wm8903_read(codec, WM8903_DAC_DIGITAL_1); if (substream == wm8903->slave_substream) { dev_dbg(&i2c->dev, "Ignoring hw_params for slave substream\n"); return 0; } + /* Enable sloping stopband filter for low sample rates */ + if (fs <= 24000) + dac_digital1 |= WM8903_DAC_SB_FILT; + else + dac_digital1 &= ~WM8903_DAC_SB_FILT; + /* Configure sample rate logic for DSP - choose nearest rate */ dsp_config = 0; best_val = abs(sample_rates[dsp_config].rate - fs); @@ -1503,6 +1508,7 @@ static int wm8903_hw_params(struct snd_pcm_substream *substream, wm8903_write(codec, WM8903_AUDIO_INTERFACE_1, aif1); wm8903_write(codec, WM8903_AUDIO_INTERFACE_2, aif2); wm8903_write(codec, WM8903_AUDIO_INTERFACE_3, aif3); + wm8903_write(codec, WM8903_DAC_DIGITAL_1, dac_digital1); return 0; } @@ -1721,6 +1727,21 @@ static __devexit int wm8903_i2c_remove(struct i2c_client *client) return 0; } +#ifdef CONFIG_PM +static int wm8903_i2c_suspend(struct i2c_client *client, pm_message_t msg) +{ + return snd_soc_suspend_device(&client->dev); +} + +static int wm8903_i2c_resume(struct i2c_client *client) +{ + return snd_soc_resume_device(&client->dev); +} +#else +#define wm8903_i2c_suspend NULL +#define wm8903_i2c_resume NULL +#endif + /* i2c codec control layer */ static const struct i2c_device_id wm8903_i2c_id[] = { { "wm8903", 0 }, @@ -1735,6 +1756,8 @@ static struct i2c_driver wm8903_i2c_driver = { }, .probe = wm8903_i2c_probe, .remove = __devexit_p(wm8903_i2c_remove), + .suspend = wm8903_i2c_suspend, + .resume = wm8903_i2c_resume, .id_table = wm8903_i2c_id, }; |