aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2008-01-23libata: Disable ATA8-ACS proposed Trusted Computing features by defaultAlan Cox
Historically word 48 in the identify data was used to mean 32bit I/O was supported for VLB IDE etc. ATA8 reassigns this word to the Trusted Computing Group, where it is used for TCG features. This means that an ATA8 TCG drive is going to trigger 32bit I/O on some systems which will be funny. Anyway we need to sort this out ready for ATA8 so: - Reorder the ata.h header a bit so the ata_version function occurs early in it - Make dword_io check the ATA version - Add an ATA8 version checking TCG presence test While we are at it the current drafts have a flaw where it may not be possible to disable TCG features at boot (and opt out of the trusted model) as TCG intends because it relies on presence of a different optional feature (DCS). Handle this in software by refusing the TCG commands if libata.allow_tpm is not set. (We must make it possible as some environments such as proprietary VDR devices will doubtless want to use it to lock up content) Finally as with CPRM print a warning so that the user knows they may not be able to full access and use the device. Signed-off-by: Alan Cox <alan@redhat.com>
2008-01-23ata_piix: Add Toshiba Satellite R20 and Tecra M6 to broken suspend list.Peter Schwenke
Add Toshiba Satellite R20 and Tecra M6 to broken suspend list. Matt Piermarini reported and provided the M6 patch. This is from OSDL bug 7780. Signed-off-by: Peter Schwenke <peter@bluetoad.com.au> Cc: Matt Piermarini <mattpiermarini@yahoo.com> Acked-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-01-22x86: GEODE fix a race condition in the MFGPT timer tickJordan Crouse
When we set the MFGPT timer tick, there is a chance that we'll immediately assert an event. If for some reason the IRQ routing for this clock has been setup for some other purpose, then we could end up firing an interrupt into the SMM handler or worse. This rearranges the timer tick init function to initalize the handler before we set up the MFGPT clock to make sure that even if we get an event, it will go to the handler. Furthermore, in the handler we need to make sure that we clear the event, even if the timer isn't running. Signed-off-by: Jordan Crouse <jordan.crouse@amd.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Ingo Molnar <mingo@elte.hu> Tested-by: Arnd Hannemann <hannemann@i4.informatik.rwth-aachen.de>
2008-01-22Fix file references in documentation and KconfigJohann Felix Soden
Fix typo in arch/powerpc/boot/flatdevtree_env.h. There is no Documentation/networking/ixgbe.txt. README.cycladesZ is now in Documentation/. wavelan.p.h is now in drivers/net/wireless/. HFS.txt is now Documentation/filesystems/hfs.txt. OSS-files are now in sound/oss/. Signed-off-by: Johann Felix Soden <johfel@users.sourceforge.net> Acked-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-01-22Merge branch 'release' of git://lm-sensors.org/kernel/mhoffman/hwmon-2.6Linus Torvalds
* 'release' of git://lm-sensors.org/kernel/mhoffman/hwmon-2.6: hwmon: (it87) request only Environment Controller ports
2008-01-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86: Revert "x86: fix NMI watchdog & 'stopped time' problem"
2008-01-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/mingo/linux-2.6-schedLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/mingo/linux-2.6-sched: sched: group scheduler, set uid share fix
2008-01-22rcu: fix section mismatchRandy Dunlap
rcu_online_cpu() should be __cpuinit instead of __devinit. WARNING: vmlinux.o(.text+0x4b6d5): Section mismatch: reference to .init.text: (between 'rcu_cpu_notify' and 'wakeme_after_rcu') Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: Sam Ravnborg <sam@ravnborg.org> Acked-by: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-01-22W1: w1_therm.c is flagging 0C etc as invalidDavid Fries
The extra rom[0] check is flagging valid temperatures as invalid when there is already a CRC data transmission check. w1_therm_read_bin() if (rom[8] == crc && rom[0]) verdict = 1; Requiring rom[0] to be non-zero will flag as invalid temperature conversions when the low byte is zero, specifically the temperatures 0C, 16C, 32C, 48C, -16C, -32C, and -48C. The CRC check is produced on the device for the previous 8 bytes and is required to ensure the data integrity in transmission. I don't see why the extra check for rom[0] being non-zero is in there. Evgeniy Polyakov didn't know either. Just for a check I unplugged the sensor, executed a temperature conversion, and read the results. The read was all ff's, which also failed the CRC, so it doesn't need to protect against a disconnected sensor. I have more extensive patches in the work, but these two trivial ones will do for today. I would like to hear from people who use the ds2490 USB to one wire dongle. 1 if you would be willing to test the patches as I currently only have the one sensor on a short parisite powered wire, 2 if there is any cheap sources for the ds2490. Signed-off-by: David Fries <david@fries.net> Acked-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-01-22W1: w1_therm.c ds18b20 decode freezing temperatures correctlyDavid Fries
Correct the decoding of negative C temperatures. The code did a binary OR of two bytes to make a 16 bit value, but assignd it to an integer. This caused the value to not be sign extended and to loose that it was a negative number in the assignment. Before the patch (in my freezer), w1_slave ed fe 4b 46 7f ff 03 10 e4 : crc=e4 YES ed fe 4b 46 7f ff 03 10 e4 t=4078 With the patch, e3 fe 4b 46 7f ff 0d 10 81 : crc=81 YES e3 fe 4b 46 7f ff 0d 10 81 t=-17 Signed-off-by: David Fries <david@fries.net> Acked-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-01-22hwmon: (it87) request only Environment Controller portsBjorn Helgaas
The IT8705F and related parts are Super I/O controllers that contain many separate devices. Some BIOSes describe IT8705F I/O port usage under a motherboard device (PNP0C02) with overlapping regions, e.g., 0x290-0x29f and 0x290-0x294. The it87 driver supports only the Environment Controller, which requires only two ISA ports, but it used to request an eight-port range. If that range exceeds a range reported by the BIOS, as 0x290-0x297 would, the request fails, and the it87 driver cannot claim the device. This patch makes the it87 driver request only the two ports used for the Environment Controller device. Systems where this problem has been reported: Gigabyte GA-K8N Ultra 9 Gigabyte M56S-S3 Gigabyte GA-965G-DS3 Kernel bug reports: http://bugzilla.kernel.org/show_bug.cgi?id=9514 http://lkml.org/lkml/2007/12/4/466 Related change: http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commitdiff;h=a7839e960675b549f06209d18283d5cee2ce9261 The patch above increases the number of PNP port resources we support. Prior to this patch, we ignored some port resources, which masked the it87 problem. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
2008-01-22sched: group scheduler, set uid share fixIngo Molnar
setting cpu share to 1 causes hangs, as reported in: http://bugzilla.kernel.org/show_bug.cgi?id=9779 as the default share is 1024, the values of 0 and 1 can indeed cause problems. Limit it to 2 or higher values. These values can only be set by the root user - but still it makes sense to protect against nonsensical values. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-01-22Revert "x86: fix NMI watchdog & 'stopped time' problem"Thomas Gleixner
This reverts commit d4d25deca49ec2527a634557bf5a6cf449f85deb. It tried to fix long standing bugzilla entries, but the solution was reported to break other systems. The reporter of http://bugzilla.kernel.org/show_bug.cgi?id=9791 tracked it down to this commit and confirmed that reverting the patch restores the correct behaviour. It's too late in the release cycle to find a better solution than reverting the commit to avoid regressions. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Ingo Molnar <mingo@elte.hu>
2008-01-21Makefile: Change typoed 'behavour' to 'behaviour'Linus Nilsson
Change two occurances of "behavour" to "behaviour". Signed-off-by: Linus Nilsson <lajnold@acc.umu.se> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-01-21Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/selinux-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/selinux-2.6: selinux: fix memory leak in netlabel code
2008-01-21Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: [ICMP]: ICMP_MIB_OUTMSGS increment duplicated [IPV6]: RFC 2011 compatibility broken [IPV6]: ICMP6_MIB_OUTMSGS increment duplicated [NET]: rtnl_link: fix use-after-free [AF_KEY]: Fix skb leak on pfkey_send_migrate() error [ATM] atm/suni.c: Fix section mismatch. [ATM] atm/idt77105.c: Fix section mismatch. [IrDA]: af_irda memory leak fixes [NEIGH]: Revert 'Fix race between neigh_parms_release and neightbl_fill_parms' [NETFILTER]: bridge-netfilter: fix net_device refcnt leaks [IPV6] ROUTE: Make sending algorithm more friendly with RFC 4861. [IPV4] FIB_HASH : Avoid unecessary loop in fn_hash_dump_zone() [NET]: Fix interrupt semaphore corruption in Intel drivers. [IPV4] fib_trie: fix duplicated route issue [IPV4] fib_hash: fix duplicated route issue [IPV6]: Mischecked tw match in __inet6_check_established. rfkill: call rfkill_led_trigger_unregister() on error
2008-01-21Merge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linusLinus Torvalds
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: tc35815: Use irq number for tc35815-mac platform device id [MIPS] Malta: Fix reading the PCI clock frequency on big-endian [MIPS] SMTC: Fix build error.
2008-01-21Fix filesystem capability supportAndrew G. Morgan
In linux-2.6.24-rc1, security/commoncap.c:cap_inh_is_capped() was introduced. It has the exact reverse of its intended behavior. This led to an unintended privilege esculation involving a process' inheritable capability set. To be exposed to this bug, you need to have Filesystem Capabilities enabled and in use. That is: - CONFIG_SECURITY_FILE_CAPABILITIES must be defined for the buggy code to be compiled in. - You also need to have files on your system marked with fI bits raised. Signed-off-by: Andrew G. Morgan <morgan@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@akpm@linux-foundation.org>
2008-01-21s3c2410_fb: fix line length calculationStefan Schmidt
Fix line length calculation. var->width is the size of the display in mm. We like to use the pixel size. Without this fix, dynamic (fbset) based resolution and depths changes with s3c2410_fb don't work at all. Spotted by john cass <johnpcass@yahoo.com> Signed-off-by: Stefan Schmidt <stefan@openmoko.org> Signed-off-by: Harald Welte <laforge@openmoko.org> Acked-by: Ben Dooks <ben-linux@fluff.org> Acked-by: Arnaud Patard <arnaud.patard@rtp-net.org> Acked-by: Krzysztof Helt <krzysztof.h1@wp.pl> Cc: "Antonino A. Daplas" <adaplas@pol.net> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@akpm@linux-foundation.org>
2008-01-21CRIS: add missed local_irq_restore callCyrill Gorcunov
Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com> Acked-by: Jesper Nilsson <jesper.nilsson@axis.com> Cc: Mikael Starvik <starvik@axis.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@akpm@linux-foundation.org>
2008-01-21timer: fix section mismatchRandy Dunlap
The caller is __cpuinit. Also, this code block and its caller are inside #ifdef CONFIG_HOTPLUG_CPU blocks, so this code should reflect that config symbol's usage. WARNING: vmlinux.o(.text+0x4252f): Section mismatch: reference to .init.text: (between 'timer_cpu_notify' and 'msleep') Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@akpm@linux-foundation.org>
2008-01-21hrtimer: fix section mismatchRandy Dunlap
Fix section mismatch in hrtimer.c: WARNING: vmlinux.o(.text+0x50c61): Section mismatch: reference to .init.text: (between 'hrtimer_cpu_notify' and 'down_read_trylock') Noticed by Johannes Berg and confirmed by Sam Ravnborg. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@akpm@linux-foundation.org>
2008-01-21keyspan: fix oopsAlan Cox
If we get a data URB back from the hardware after we have put the tty to bed we go kaboom. Fortunately all we need to do is process the URB without trying to ram its contents down the throat of an ex-tty. Signed-off-by: Alan Cox <alan@redhat.com> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@akpm@linux-foundation.org>
2008-01-22tc35815: Use irq number for tc35815-mac platform device idAtsushi Nemoto
The tc35815-mac platform device used a pci bus number and a devfn to identify its target device, but the pci bus number may vary if some bus-bridges are found. Use irq number which is be unique for embedded controllers. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-01-22[MIPS] Malta: Fix reading the PCI clock frequency on big-endianDmitri Vorobiev
The JMPRS register on Malta boards keeps a 32-bit CPU-endian value. The readw() function assumes that the value it reads is a little-endian 16-bit number. Therefore, using readw() to obtain the value of the JMPRS register is a mistake. This error leads to incorrect reading of the PCI clock frequency on big-endian during board start-up. Change readw() to __raw_readl(). This was tested by injecting a call to printk() and verifying that the value of the jmpr variable was consistent with current setting of the JP4 "PCI CLK" jumper. Signed-off-by: Dmitri Vorobiev <dmitri.vorobiev@gmail.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-01-22[MIPS] SMTC: Fix build error.Frank Rowand
Fix compile warning (which becomes compile error due to -Werror). Type of argument "flags" for spin_lock_irqsave() was incorrect in some functions. Signed-off-by: Frank Rowand <frank.rowand@am.sony.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-01-22selinux: fix memory leak in netlabel codePaul Moore
Fix a memory leak in security_netlbl_sid_to_secattr() as reported here: * https://bugzilla.redhat.com/show_bug.cgi?id=352281 Signed-off-by: Paul Moore <paul.moore@hp.com> Signed-off-by: James Morris <jmorris@namei.org>
2008-01-21[ICMP]: ICMP_MIB_OUTMSGS increment duplicatedWang Chen
Commit "96793b482540f3a26e2188eaf75cb56b7829d3e3" (Add ICMPMsgStats MIB (RFC 4293)) made a mistake. In that patch, David L added a icmp_out_count() in ip_push_pending_frames(), remove icmp_out_count() from icmp_reply(). But he forgot to remove icmp_out_count() from icmp_send() too. Since icmp_send and icmp_reply will call icmp_push_reply, which will call ip_push_pending_frames, a duplicated increment happened in icmp_send. This patch remove the icmp_out_count from icmp_send too. Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-21[IPV6]: RFC 2011 compatibility brokenWang Chen
The snmp6 entry name was changed, and it broke compatibility to RFC 2011. Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com> Acked-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-21[IPV6]: ICMP6_MIB_OUTMSGS increment duplicatedWang Chen
icmpv6_send() calls ip6_push_pending_frames() indirectly. Both ip6_push_pending_frames() and icmpv6_send() increment counter ICMP6_MIB_OUTMSGS. This patch remove the increment from icmpv6_send. Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com> Acked-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-20[NET]: rtnl_link: fix use-after-freePatrick McHardy
When unregistering the rtnl_link_ops, all existing devices using the ops are destroyed. With nested devices this may lead to a use-after-free despite the use of for_each_netdev_safe() in case the upper device is next in the device list and is destroyed by the NETDEV_UNREGISTER notifier. The easy fix is to restart scanning the device list after removing a device. Alternatively we could add new devices to the front of the list to avoid having dependant devices follow the device they depend on. A third option would be to only restart scanning if dev->iflink of the next device matches dev->ifindex of the current one. For now this seems like the safest solution. With this patch, the veth rtnl_link_ops unregistration can use rtnl_link_unregister() directly since it now also handles destruction of multiple devices at once. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-20[AF_KEY]: Fix skb leak on pfkey_send_migrate() errorPatrick McHardy
Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-20[ATM] atm/suni.c: Fix section mismatch.Adrian Bunk
EXPORT_SYMBOL'ed code mustn't be __*init. Signed-off-by: Adrian Bunk <bunk@kernel.org> Acked-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-20[ATM] atm/idt77105.c: Fix section mismatch.Adrian Bunk
EXPORT_SYMBOL'ed code mustn't be __*init. Signed-off-by: Adrian Bunk <bunk@kernel.org> Acked-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-20[IrDA]: af_irda memory leak fixesJesper Juhl
Here goes an IrDA patch against your latest net-2.6 tree. This patch fixes some af_irda memory leaks. It also checks for irias_new_obect() return value. Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com> Signed-off-by: Samuel Ortiz <samuel@sortiz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-20[NEIGH]: Revert 'Fix race between neigh_parms_release and neightbl_fill_parms'David S. Miller
Commit 9cd40029423701c376391da59d2c6469672b4bed (Fix race between neigh_parms_release and neightbl_fill_parms) introduced device reference counting regressions for several people, see: http://bugzilla.kernel.org/show_bug.cgi?id=9778 for example. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-20[NETFILTER]: bridge-netfilter: fix net_device refcnt leaksPatrick McHardy
When packets are flood-forwarded to multiple output devices, the bridge-netfilter code reuses skb->nf_bridge for each clone to store the bridge port. When queueing packets using NFQUEUE netfilter takes a reference to skb->nf_bridge->physoutdev, which is overwritten when the packet is forwarded to the second port. This causes refcount unterflows for the first device and refcount leaks for all others. Additionally this provides incorrect data to the iptables physdev match. Unshare skb->nf_bridge by copying it if it is shared before assigning the physoutdev device. Reported, tested and based on initial patch by Jan Christoph Nordholz <hesso@pool.math.tu-berlin.de>. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-20[IPV6] ROUTE: Make sending algorithm more friendly with RFC 4861.YOSHIFUJI Hideaki
We omit (or delay) sending NSes for known-to-unreachable routers (in NUD_FAILED state) according to RFC 4191 (Default Router Preferences and More-Specific Routes). But this is not fully compatible with RFC 4861 (Neighbor Discovery Protocol for IPv6), which does not remember unreachability of neighbors. So, let's avoid mixing sending algorithm of RFC 4191 and that of RFC 4861, and make the algorithm more friendly with RFC 4861 if RFC 4191 is disabled. Issue was found by IPv6 Ready Logo Core Self_Test 1.5.0b2 (by TAHI Project), and has been tracked down by Mitsuru Chinen <mitch@linux.vnet.ibm.com>. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-20[IPV4] FIB_HASH : Avoid unecessary loop in fn_hash_dump_zone()Eric Dumazet
I noticed "ip route list" was slower than "cat /proc/net/route" on a machine with a full Internet routing table (214392 entries : Special thanks to Robert ;) ) This is similar to problem reported in commit d8c9283089287341c85a0a69de32c2287a990e71 ("[IPV4] ROUTE: ip_rt_dump() is unecessary slow") Fix is to avoid scanning the begining of fz_hash table, but directly seek to the right offset. Before patch : time ip route >/tmp/ROUTE real 0m1.285s user 0m0.712s sys 0m0.436s After patch # time ip route >/tmp/ROUTE real 0m0.835s user 0m0.692s sys 0m0.124s Signed-off-by: Eric Dumazet <dada1@cosmosbay.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-20[NET]: Fix interrupt semaphore corruption in Intel drivers.David S. Miller
Several of the Intel ethernet drivers keep an atomic counter used to manage when to actually hit the hardware with a disable or an enable. The way the net_rx_work() breakout logic works during a pending napi_disable() is that it simply unschedules the poll even if it still has work. This can potentially leave interrupts disabled, but that is OK because all of the drivers are about to disable interrupts anyways in all such code paths that do a napi_disable(). Unfortunately, this trips up the semaphore used here in the Intel drivers. If you hit this case, when you try to bring the interface back up it won't enable interrupts. A reload of the driver module fixes it of course. So what we do is make sure all the sequences now go: napi_disable(); atomic_set(&adapter->irq_sem, 0); *_irq_disable(); which makes sure the counter is always in the correct state. Reported by Robert Olsson. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-20[IPV4] fib_trie: fix duplicated route issueJoonwoo Park
http://bugzilla.kernel.org/show_bug.cgi?id=9493 The fib allows making identical routes with 'ip route replace'. This patch makes the fib return -EEXIST if replacement would cause duplication. Signed-off-by: Joonwoo Park <joonwpark81@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-20[IPV4] fib_hash: fix duplicated route issueJoonwoo Park
http://bugzilla.kernel.org/show_bug.cgi?id=9493 The fib allows making identical routes with 'ip route replace'. This patch makes the fib return -EEXIST if replacement would cause duplication. Signed-off-by: Joonwoo Park <joonwpark81@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-20[IPV6]: Mischecked tw match in __inet6_check_established.Pavel Emelyanov
When looking for a conflicting connection the !sk->sk_bound_dev_if check is performed only for live sockets, but not for timewait-ed. This is not the case for ipv4, for __inet6_lookup_established in both ipv4 and ipv6 and for other places that check for tw-s. Was this missed accidentally? If so, then this patch fixes it and besides makes use if the dif variable declared in the function. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-20rfkill: call rfkill_led_trigger_unregister() on errorEric Paris
Code inspection turned up that error cases in rfkill_register() do not call rfkill_led_trigger_unregister() even though we have already registered. Signed-off-by: Eric Paris <eparis@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-20Merge branch 'omap-fixes' of ↵Russell King
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 * 'omap-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: ARM: OMAP1: Fix compile for board-nokia770 ARM: OMAP1: Keymap fix for f-sample and p2-sample
2008-01-20[ARM] 4748/1: dca: source drivers/dca/Kconfig in arch/arm/Kconfig to fix warningDan Williams
'select' used by config symbol 'INTEL_IOATDMA' refers to undefined symbol 'DCA' Although drivers/dma is currently the only user future drivers outside of drivers/dma may select this option so it is better to add this to arch/arm/Kconfig than move DCA to drivers/dma/Kconfig. Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-20[ARM] pxa: don't rely on r2 being preserved over a function callRussell King
r2 is not guaranteed to be preserved over a function call, so relying on it to store the link register over the call to sleep_phys_sp() is unreliable. Store the link register on the stack instead. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-19Remove bogus duplicate CONFIG_LGUEST_GUEST entry.Rusty Russell
It was moved to arch/x86/lguest/Kconfig, but I lost the deletion part in a patch suffle. My confused one-liner "fix" to turn it on is also reverted: 84f7466ee20cc094aa38617abfa2f3834871f054 Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-01-19arch: Ignore arch/i386 and arch/x86_64Josef 'Jeff' Sipek
The i386 and x86_64 arch directories contain nothing but a generated symlink to arch/x86/boot/bzImage when a tree a built. Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Peter Anvin <hpa@zytor.com> Signed-off-by: Josef 'Jeff' Sipek <jeffpc@josefsipek.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-01-19pata_pdc202xx_old: Fix crashes with ATAPIAlan Cox
The PDC202xx older devices do not support ATAPI DMA via the usual interfaces. What documentation I have isn't sufficient to support DMA and it isn't clear if the Windows drivers do this or it is possible at all. (Neither do the drivers/ide old drivers) So turn it ATAPI DMA off, these are disk optimised controllers. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>