aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2009-10-01Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
2009-10-01pktgen: Fix delay handlingEric Dumazet
After last pktgen changes, delay handling is wrong. pktgen actually sends packets at full line speed. Fix is to update pkt_dev->next_tx even if spin() returns early, so that next spin() calls have a chance to see a positive delay. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-01ixgbe: correct the parameter descriptionJiri Pirko
ccffad25b5136958d4769ed6de5e87992dd9c65c changed parameters for function ixgbe_update_uc_addr_list_generic but parameter description was not updated. This patch corrects it. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Acked-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-30be2net: Workaround to fix a bug in Rx Completion processing.Ajit Khaparde
vtp bit in RX completion descriptor could be wrongly set in some skews of BladEngine. Ignore this bit if vtm is not set. Resending because the previous patch was against net-next tree. This patch is against the net-2.6 tree. Signed-off-by: Ajit Khaparde <ajitk@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-303c59x: Rework suspend and resumeAnton Vorontsov
As noticed by Alan Stern, there is still one issue with the driver: we disable PCI IRQ on suspend, but other devices on the same IRQ line might still need the IRQ enabled to suspend properly. Nowadays, PCI core handles all power management work by itself, with one condition though: if we use dev_pm_ops. So, rework the driver to only quiesce 3c59x internal logic on suspend, while PCI core will manage PCI device power state with IRQs disabled. Suggested-by: Rafael J. Wysocki <rjw@sisk.pl> Suggested-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Acked-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-30drivers/net: ks8851_mll ethernet network driverChoi, David
This is the first registration of ks8851 network driver with MLL(address/data multiplexed) interface. Signed-off-by : David J. Choi <david.choi@micrel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-30skge: Make sure both ports initialize correctlyMike McCormack
If allocation of the second ports fails, make sure that hw->ports is not 2 otherwise we'll crash trying to access the second port. This fix is copied from a similar fix in the sky2 driver (ca519274...), but is untested, as I don't have a skge card. Signed-off-by: Mike McCormack <mikem@ring3k.org> Acked-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-30bcm63xx_enet: timeout off by one in do_mdio_op()roel kluin
`while (limit-- >= 0)' reaches -2 after the loop upon timeout. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Acked-by: Maxime Bizon <mbizon@freebox.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-30qlge: Fix error exit for probe call.Ron Mercer
Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-30qlge: Protect reset recovery with rtnl_lock().Ron Mercer
Move the call to rtnl_lock() to before the internal call to ql_adapter_down()/ql_adapter_up(). This prevents collisions that can happen when recovering from an asic error. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-30qlge: Fix spin_lock warning.Ron Mercer
Remove the unnecessary locking around the call to ql_adapter_reset(). Sep 25 08:17:29 localhost kernel: SOFTIRQ-ON-W at: Sep 25 08:17:29 localhost kernel: [<c0000000000a2964>] .lock_acquire+0x10c/0x158 Sep 25 08:17:29 localhost kernel: [<c0000000004542e0>] ._spin_lock+0x34/0x58 Sep 25 08:17:29 localhost kernel: [<d000000006723070>] .ql_adapter_down+0x40c/0x4a0 [qlge] Sep 25 08:17:29 localhost kernel: [<d0000000067256d8>] .qlge_close+0x38/0x58 [qlge] Sep 25 08:17:29 localhost kernel: [<c0000000003ada6c>] .dev_close+0xdc/0x118 Sep 25 08:17:29 localhost kernel: [<c0000000003adb48>] .rollback_registered+0xa0/0x158 Sep 25 08:17:29 localhost kernel: [<c0000000003adc50>] .unregister_netdevice+0x50/0x7c Sep 25 08:17:29 localhost kernel: [<c0000000003adca0>] .unregister_netdev+0x24/0x40 Sep 25 08:17:29 localhost kernel: [<d00000000672e0c0>] .qlge_remove+0x28/0x64 [qlge] Sep 25 08:17:29 localhost kernel: [<c000000000253fdc>] .pci_device_remove+0x50/0x90 Sep 25 08:17:29 localhost kernel: [<c0000000002f5434>] .__device_release_driver+0x94/0xf8 Sep 25 08:17:29 localhost kernel: [<c0000000002f5560>] .driver_detach+0xc8/0xfc Sep 25 08:17:29 localhost kernel: [<c0000000002f3fd8>] .bus_remove_driver+0xb4/0x114 Sep 25 08:17:29 localhost kernel: [<c0000000002f5d4c>] .driver_unregister+0x80/0xa4 Sep 25 08:17:29 localhost kernel: [<c00000000025421c>] .pci_unregister_driver+0x50/0xc8 Sep 25 08:17:29 localhost kernel: [<d00000000672e044>] .qlge_exit+0x1c/0x34 [qlge] Sep 25 08:17:29 localhost kernel: [<c0000000000ac8b0>] .SyS_delete_module+0x234/0x2d0 Sep 25 08:17:29 localhost kernel: [<c000000000008554>] syscall_exit+0x0/0x40 Sep 25 08:17:29 localhost kernel: INITIAL USE at: Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-30qlge: Fix out of sync hardware semaphore.Ron Mercer
ql_clear_routing_entries() takes/gives it's own hardware semaphore since it is called from more than one place. ql_route_initialize() should make this call and THEN take it's own semaphore before doing it's work. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-30qlge: Fix bad bit definitions.Ron Mercer
Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-30ixgbe: Remove ATR computation for UDP trafficPeter P Waskiewicz Jr
ATR support for UDP on 82599 needs to be redesigned, since the current model doesn't make much sense. The fallout from having it in though is it causes all UDP traffic to still compute the ATR hashes on transmit, which are useless. This removal will return upwards of 10% of relative computational overhead in forwarding tests. Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-30ixgbe patch to provide NIC's tx/rx counters via ethtoolBen Greear
When LRO is enabled, the received packet and byte counters represent the LRO'd packets, not the packets/bytes on the wire. The Intel 82599 NIC has registers that keep count of the physical packets. Add these counters to the ethtool stats. The byte counters are 36-bit, but the high 4 bits were being ignored in the 2.6.31 ixgbe driver: Read those as well to allow longer time between polling the stats to detect wraps. Signed-off-by: Ben Greear <greearb@candelatech.com> Acked-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-30ixgbe: Bump driver version numberPeter P Waskiewicz Jr
A number of changes have gone in since the last version bump. Bump it to reflect the changes. Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-30ixgbe: Fix backplane flow control autonegPeter P Waskiewicz Jr
Backplane flow control autonegotiation is currently broken for ixgbe devices. This patch fixes the flow control issues with clause 37 autoneg. Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-30ixgbe: Fix disabling of relaxed ordering with Tx DCAPeter P Waskiewicz Jr
82599 has a different register offset for the Tx DCA control registers. We disable relaxed ordering of the descriptor writebacks for Tx head writeback, but didn't disable it properly for 82599. However, this shouldn't be a visible issue, since ixgbe doesn't use Tx head writeback. This patch just makes sure we're not doing blind writes to offsets we don't expect. Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-30ax25: Fix possible oops in ax25_make_newJarek Poplawski
In ax25_make_new, if kmemdup of digipeat returns an error, there would be an oops in sk_free while calling sk_destruct, because sk_protinfo is NULL at the moment; move sk->sk_destruct initialization after this. BTW of reported-by: Bernard Pidoux F6BVP <f6bvp@free.fr> Signed-off-by: Jarek Poplawski <jarkao2@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-30net: restore tx timestamping for accelerated vlansEric Dumazet
Since commit 9b22ea560957de1484e6b3e8538f7eef202e3596 ( net: fix packet socket delivery in rx irq handler ) We lost rx timestamping of packets received on accelerated vlans. Effect is that tcpdump on real dev can show strange timings, since it gets rx timestamps too late (ie at skb dequeueing time, not at skb queueing time) 14:47:26.986871 IP 192.168.20.110 > 192.168.20.141: icmp 64: echo request seq 1 14:47:26.986786 IP 192.168.20.141 > 192.168.20.110: icmp 64: echo reply seq 1 14:47:27.986888 IP 192.168.20.110 > 192.168.20.141: icmp 64: echo request seq 2 14:47:27.986781 IP 192.168.20.141 > 192.168.20.110: icmp 64: echo reply seq 2 14:47:28.986896 IP 192.168.20.110 > 192.168.20.141: icmp 64: echo request seq 3 14:47:28.986780 IP 192.168.20.141 > 192.168.20.110: icmp 64: echo reply seq 3 Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-30Phonet: fix mutex imbalanceRémi Denis-Courmont
From: Rémi Denis-Courmont <remi.denis-courmont@nokia.com> port_mutex was unlocked twice. Signed-off-by: Rémi Denis-Courmont <remi.denis-courmont@nokia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-30sit: fix off-by-one in ipip6_tunnel_get_prlSascha Hlusiak
When requesting all prl entries (kprl.addr == INADDR_ANY) and there are more prl entries than there is space passed from userspace, the existing code would always copy cmax+1 entries, which is more than can be handled. This patch makes the kernel copy only exactly cmax entries. Signed-off-by: Sascha Hlusiak <contact@saschahlusiak.de> Acked-By: Fred L. Templin <Fred.L.Templin@boeing.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-30net: Fix sock_wfree() raceEric Dumazet
Commit 2b85a34e911bf483c27cfdd124aeb1605145dc80 (net: No more expensive sock_hold()/sock_put() on each tx) opens a window in sock_wfree() where another cpu might free the socket we are working on. A fix is to call sk->sk_write_space(sk) while still holding a reference on sk. Reported-by: Jike Song <albcamus@gmail.com> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-30net: Make setsockopt() optlen be unsigned.David S. Miller
This provides safety against negative optlen at the type level instead of depending upon (sometimes non-trivial) checks against this sprinkled all over the the place, in each and every implementation. Based upon work done by Arjan van de Ven and feedback from Linus Torvalds. Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-29ar9170: fix bug in iq-auto calibration value calculationChristian Lamparter
This patch fixes a embarrassing bug which was introduced by: "[PATCH] ar9170: implement frequency calibration for one-stage/openfw" The phy_data variable initialization has to done outside the for-loop scope. This is because the for-loop uses u32 phy_data variable more like a 4-byte field. But in each run only a single byte is calculated. Therefore phy_data content needs to stay the same for at least 3 more iterations, before the complete set can be uploaded. Reported-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-29rt2x00: Thrustmaster FunAccess WIFI USB and rt73usbMichal Szalata
Thrustmaster FunAccess WIFI USB works with rt73usb with little modification of rt73usb.c. Tested with version 2.3.0 of driver. Signed-off-by: Michal Szalata <szalat@gmail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-29mac80211_hwsim: Fix initial beacon timer configurationJouni Malinen
mac80211_hwsim does not start transmitting Beacon frames when hostapd is started for the first time and restarting hostapd fixes this. The issue is caused by the config() handler not being able to start beacon_timer when beacon interval is not yet known and bss_info_changed() handler not starting the timer. This can be fixed by making the bss_info_changed() update the timer. Signed-off-by: Jouni Malinen <j@w1.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-29b43: Always use block-I/O for the PIO data registersMichael Buesch
On SDIO the PIO data register seems to be hardwired to LE. So the MACCTL bit has no effect on the endianness. So also use block-I/O for the last word of the packet. block-I/O is always LE. Signed-off-by: Michael Buesch <mb@bu3sch.de> Tested-by: Albert Herranz <albert_herranz@yahoo.es> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-29mac80211: Fix [re]association power saving issue on AP sideIgor Perminov
Consider the following step-by step: 1. A STA authenticates and associates with the AP and exchanges traffic. 2. The STA reports to the AP that it is going to PS state. 3. Some time later the STA device goes to the stand-by mode (not only its wi-fi card, but the device itself) and drops the association state without sending a disassociation frame. 4. The STA device wakes up and begins authentication with an Auth frame as it hasn't been authenticated/associated previously. At the step 4 the AP "remembers" the STA and considers it is still in the PS state, so the AP buffers frames, which it has to send to the STA. But the STA isn't actually in the PS state and so it neither checks TIM bits nor reports to the AP that it isn't power saving. Because of that authentication/[re]association fails. To fix authentication/[re]association stage of this issue, Auth, Assoc Resp and Reassoc Resp frames are transmitted disregarding of STA's power saving state. N.B. This patch doesn't fix further data frame exchange after authentication/[re]association. A patch in hostapd is required to fix that. Signed-off-by: Igor Perminov <igor.perminov@inbox.ru> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-28Merge branch 'master' of ↵David S. Miller
ssh://master.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
2009-09-28sony-laptop: re-read the rfkill state when resuming from suspendAlan Jenkins
Without this, the hard-blocked state will be reported incorrectly if the hardware switch is changed while the laptop is suspended. Signed-off-by: Alan Jenkins <alan-jenkins@tuffmail.co.uk> Tested-by: Norbert Preining <preining@logic.at> Acked-by: Mattia Dongili <malattia@linux.it> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-28sony-laptop: check for rfkill hard block at load timeAlan Jenkins
"I recently (on a flight) I found out that when I boot with the hard-switch activated, so turning off all wireless activity on my laptop, the state is not correctly announced in /dev/rfkill (reading it with rfkill command, or my own gnome applet)... After turning off and on again the hard-switch the events were right." We can fix this by querying the firmware at load time and calling rfkill_set_hw_state(). Signed-off-by: Alan Jenkins <alan-jenkins@tuffmail.co.uk> Tested-by: Norbert Preining <preining@logic.at> Acked-by: Johannes Berg <johannes@sipsolutions.net> Acked-by: Mattia Dongili <malattia@linux.it> CC: stable@kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-28wext: add back wireless/ dir in sysfs for cfg80211 interfacesJohannes Berg
The move away from having drivers assign wireless handlers, in favour of making cfg80211 assign them, broke the sysfs registration (the wireless/ dir went missing) because the handlers are now assigned only after registration, which is too late. Fix this by special-casing cfg80211-based devices, all of which are required to have an ieee80211_ptr, in the sysfs code, and also using get_wireless_stats() to have the same values reported as in procfs. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Reported-by: Hugh Dickins <hugh.dickins@tiscali.co.uk> Tested-by: Hugh Dickins <hugh.dickins@tiscali.co.uk> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-28wext: Add bound checks for copy_from_userArjan van de Ven
The wireless extensions have a copy_from_user to a local stack array "essid", but both me and gcc have failed to find where the bounds for this copy are located in the code. This patch adds some basic sanity checks for the copy length to make sure that we don't overflow the stack buffer. Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Cc: linux-wireless@vger.kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-28mac80211: improve/fix mlme messagesJohannes Berg
It's useful to know the MAC address when being disassociated; fix a typo (missing colon) and move some messages so we get them only when they are actually taking effect. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-28cfg80211: always get BSSJohannes Berg
Multiple problems were reported due to interaction between wpa_supplicant and the wext compat code in cfg80211, which appear to be due to it not getting any bss pointer here when wpa_supplicant sets all parameters -- do that now. We should still get the bss after doing an extra scan, but that appears to increase the time we need for connecting enough to sometimes cause timeouts. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Tested-by: Hin-Tak Leung <hintak.leung@gmail.com>, Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-28iwlwifi: fix 3945 ucode info retrieval after failureReinette Chatre
When hardware or uCode problem occurs driver captures significant information from device to enable debugging. The format of this information is different between 3945 and 4965 and later devices, yet currently the 3945 uses the 4965 and later format. Fix this by adding a new library call that is initialized to the correct formatting routine based on device. This moves the iwlagn event and error log handling back to iwl-agn.c to make it part of iwlagn module. Also remove the 3945 sysfs file that triggers dump of event log - there is already a debugfs file that can do it for all drivers. Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-28iwlwifi: fix memory leak in command queue handlingReinette Chatre
Also free the array of command pointers and meta data of each command buffer when command queue is freed. Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-28iwlwifi: fix debugfs buffer handlingReinette Chatre
We keep track of where to write into a buffer by keeping a count of how much has been written so far. When writing to the buffer we thus take the buffer pointer and adding the count of what has been written so far. Keeping track of what has been written so far is done by incrementing this number every time something is written to the buffer with how much has been written at that time. Currently this number is incremented incorrectly when using the "hex_dump_to_buffer" call to add data to the buffer. Fix this by only adding what has been added to the buffer in that call instead of what has been added since beginning of buffer. Issue was discovered and discussed during testing of https://bugzilla.redhat.com/show_bug.cgi?id=464598 . When a user views any of these files they will see something like: [ 179.355202] ------------[ cut here ]------------ [ 179.355209] WARNING: at ../lib/vsprintf.c:989 vsnprintf+0x5ec/0x5f0() [ 179.355212] Hardware name: VGN-Z540N [ 179.355213] Modules linked in: i915 drm i2c_algo_bit i2c_core ipv6 acpi_cpufreq cpufreq_userspace cpufreq_powersave cpufreq_ondemand cpufreq_conservative cpufreq_stats freq_table container sbs sbshc arc4 ecb iwlagn iwlcore joydev led_class mac80211 af_packet pcmcia psmouse sony_laptop cfg80211 iTCO_wdt iTCO_vendor_support pcspkr serio_raw rfkill intel_agp video output tpm_infineon tpm tpm_bios button battery yenta_socket rsrc_nonstatic pcmcia_core processor ac evdev ext3 jbd mbcache sr_mod sg cdrom sd_mod ahci libata scsi_mod ehci_hcd uhci_hcd usbcore thermal fan thermal_sys [ 179.355262] Pid: 5449, comm: cat Not tainted 2.6.31-wl-54419-ge881071 #62 [ 179.355264] Call Trace: [ 179.355267] [<ffffffff811ad14c>] ? vsnprintf+0x5ec/0x5f0 [ 179.355271] [<ffffffff81041348>] warn_slowpath_common+0x78/0xd0 [ 179.355275] [<ffffffff810413af>] warn_slowpath_null+0xf/0x20 [ 179.355277] [<ffffffff811ad14c>] vsnprintf+0x5ec/0x5f0 [ 179.355280] [<ffffffff811ad23d>] ? scnprintf+0x5d/0x80 [ 179.355283] [<ffffffff811ad23d>] scnprintf+0x5d/0x80 [ 179.355286] [<ffffffff811aed29>] ? hex_dump_to_buffer+0x189/0x340 [ 179.355290] [<ffffffff810e91d7>] ? __kmalloc+0x207/0x260 [ 179.355303] [<ffffffffa02a02f8>] iwl_dbgfs_nvm_read+0xe8/0x220 [iwlcore] [ 179.355306] [<ffffffff811a9b62>] ? __up_read+0x92/0xb0 [ 179.355310] [<ffffffff810f0988>] vfs_read+0xc8/0x1a0 [ 179.355313] [<ffffffff810f0b50>] sys_read+0x50/0x90 [ 179.355316] [<ffffffff8100bd6b>] system_call_fastpath+0x16/0x1b [ 179.355319] ---[ end trace 2383d0d5e0752ca0 ]--- Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-28cfg80211: don't set privacy w/o keyJohannes Berg
When wpa_supplicant is used to connect to open networks, it causes the wdev->wext.keys to point to key memory, but that key memory is all empty. Only use privacy when there is a default key to be used. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Tested-by: Luis R. Rodriguez <lrodriguez@atheros.com> Tested-by: Kalle Valo <kalle.valo@iki.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-28cfg80211: wext: don't display BSSID unless associatedJohannes Berg
Currently, cfg80211's SIOCGIWAP implementation returns the BSSID that the user set, even if the connection has since been dropped due to other changes. It only should return the current BSSID when actually connected. Also do a small code cleanup. Reported-by: Thomas H. Guenther <thomas.h.guenther@intel.com> Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Tested-by: Thomas H. Guenther <thomas.h.guenther@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-28net: Add explicit bound checks in net/socket.cArjan van de Ven
The sys_socketcall() function has a very clever system for the copy size of its arguments. Unfortunately, gcc cannot deal with this in terms of proving that the copy_from_user() is then always in bounds. This is the last (well 9th of this series, but last in the kernel) such case around. With this patch, we can turn on code to make having the boundary provably right for the whole kernel, and detect introduction of new security accidents of this type early on. Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-28bridge: Fix double-free in br_add_if.Jeff Hansen
There is a potential double-kfree in net/bridge/br_if.c. If br_fdb_insert fails, then the kobject is put back (which calls kfree due to the kobject release), and then kfree is called again on the net_bridge_port. This patch fixes the crash. Thanks to Stephen Hemminger for the one-line fix. Signed-off-by: Jeff Hansen <x@jeffhansen.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-28isdn: fix netjet/isdnhdlc build errorsRandy Dunlap
Commit cb3824bade2549d7ad059d5802da43312540fdee didn't fix this problem. Fix build errors in netjet, using isdnhdlc module: drivers/built-in.o: In function `mode_tiger': netjet.c:(.text+0x1ca0c7): undefined reference to `isdnhdlc_rcv_init' netjet.c:(.text+0x1ca0d4): undefined reference to `isdnhdlc_out_init' drivers/built-in.o: In function `fill_dma': netjet.c:(.text+0x1ca2bd): undefined reference to `isdnhdlc_encode' drivers/built-in.o: In function `read_dma': netjet.c:(.text+0x1ca614): undefined reference to `isdnhdlc_decode' drivers/built-in.o: In function `nj_irq': netjet.c:(.text+0x1cb07a): undefined reference to `isdnhdlc_encode' drivers/built-in.o: In function `isdnhdlc_decode': (.text+0x1c2088): undefined reference to `crc_ccitt_table' drivers/built-in.o: In function `isdnhdlc_encode': (.text+0x1c2339): undefined reference to `crc_ccitt_table' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-28atm: dereference of he_dev->rbps_virt in he_init_group()Juha Leppanen
The prefix decrement causes a very long loop if pci_pool_alloc() failed in the first iteration. Also I swapped rbps and rbpl arguments. Reported-by: Juha Leppanen <juha_motorsportcom@luukku.com> Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-28ax25: Add missing dev_put in ax25_setsockoptRalf Baechle
ax25_setsockopt SO_BINDTODEVICE is missing a dev_put call in case of success. Re-order code to fix this bug. While at it also reformat two lines of code to comply with the Linux coding style. Initial patch by Jarek Poplawski <jarkao2@gmail.com>. Reported-by: Bernard Pidoux F6BVP <f6bvp@free.fr> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-26Revert "sit: stateless autoconf for isatap"Sascha Hlusiak
This reverts commit 645069299a1c7358cf7330afe293f07552f11a5d. While the code does not actually break anything, it does not completely follow RFC5214 yet. After talking back with Fred L. Templin, I agree that completing the ISATAP specific RS/RA code, would pollute the kernel a lot with code that is better implemented in userspace. The kernel should not send RS packages for ISATAP at all. Signed-off-by: Sascha Hlusiak <contact@saschahlusiak.de> Acked-by: Fred L. Templin <Fred.L.Templin@boeing.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-26net: fix double skb free in dcbnlJohn Fastabend
netlink_unicast() calls kfree_skb even in the error case. dcbnl calls netlink_unicast() which when it fails free's the skb and returns an error value. dcbnl is free'ing the skb again when this error occurs. This patch removes the double free. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-26net: fix nlmsg len size for skb when error bit is set.John Fastabend
Currently, the nlmsg->len field is not set correctly in netlink_ack() for ack messages that include the nlmsg of the error frame. This corrects the length field passed to __nlmsg_put to use the correct payload size. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-26net: fix vlan_get_size to include vlan_flags sizeJohn Fastabend
Fix vlan_get_size to include vlan->flags. Currently, the size of the vlan flags is not included in the nlmsg size. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-29 14:13:12 +0000