aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2009-09-11netxen: fix file firmware leakDhananjay Phadke
Release file firmware when no firmware reset is required. Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-11netxen: improve pci memory accessDhananjay Phadke
o Access on card memory through memory controller (agent) rather than moving small pci window around. Clean up the code for moving windows around. o Restrict memory accesss to 64 bit, currently only firmware download uses this. Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-11netxen: change firmware write sizeAmit Kumar Salecha
Use 8 byte strides for firmware download into card memory since oncard memory controller needs 8 byte (64 bit) accesses. This avoids unnecessary rmw cycles. Signed-off-by: Amit Kumar Salecha <amit@netxen.com> Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-11tg3: Fix return ring size breakageMatt Carlson
Commit f6eb9b1fc1411d22c073f5264e5630a541d0f7df, "tg3: Add 5717 asic rev" changed how the rx return ring size operations are done. It effectively inverts the sense of the previous test, but it failed to also invert the resulting sizes. This patch corrects that error. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-11netxen: build fix for INET=nRandy Dunlap
When CONFIG_INET is disabled, netxen has a build failure: netxen_nic_main.c:(.text+0x118fd1): undefined reference to `netxen_config_indev_addr' so make that function just an empty stub when CONFIG_INET=n. (not "inline" since that conflicts with other declarations of it) Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Acked-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-11cdc-phonet: autoconfigure Phonet addressRémi Denis-Courmont
Signed-off-by: Rémi Denis-Courmont <remi.denis-courmont@nokia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-11Phonet: back-end for autoconfigured addressesRémi Denis-Courmont
In some cases, the network device driver knows what layer-3 address the device should have. This adds support for the Phonet stack to automatically request from the driver and add that address to the network device. Signed-off-by: Rémi Denis-Courmont <remi.denis-courmont@nokia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-11Phonet: fix netlink address dump error handlingRémi Denis-Courmont
Signed-off-by: Rémi Denis-Courmont <remi.denis-courmont@nokia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-11ipv6: Add IFA_F_DADFAILED flagBrian Haley
Add IFA_F_DADFAILED flag to denote an IPv6 address that has failed Duplicate Address Detection, that way tools like /sbin/ip can be more informative. 3: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qlen 1000 inet6 2001:db8::1/64 scope global tentative dadfailed valid_lft forever preferred_lft forever Signed-off-by: Brian Haley <brian.haley@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-11net: Add DEVTYPE support for Ethernet based devicesMarcel Holtmann
The Ethernet framing is used for a lot of devices these days. Most prominent are WiFi and WiMAX based devices. However for userspace application it is important to classify these devices correctly and not only see them as Ethernet devices. The daemons like HAL, DeviceKit or even NetworkManager with udev support tries to do the classification in userspace with a lot trickery and extra system calls. This is not good and actually reaches its limitations. Especially since the kernel does know the type of the Ethernet device it is pretty stupid. To solve this problem the underlying device type needs to be set and then the value will be exported as DEVTYPE via uevents and available within udev. # cat /sys/class/net/wlan0/uevent DEVTYPE=wlan INTERFACE=wlan0 IFINDEX=5 This is similar to subsystems like USB and SCSI that distinguish between hosts, devices, disks, partitions etc. The new SET_NETDEV_DEVTYPE() is a convenience helper to set the actual device type. All device types are free form, but for convenience the same strings as used with RFKILL are choosen. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-11mv643xx_eth.c: remove unused txq_set_wrr()Mikael Pettersson
The txq_set_wrr() function in drivers/net/mv643xx_eth.c is unused, not even referenced under #if 0 or something like that, which results in a compile-time warning: drivers/net/mv643xx_eth.c:1070: warning: 'txq_set_wrr' defined but not used Fix: remove it. Signed-off-by: Mikael Pettersson <mikpe@it.uu.se> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-11ucc_geth: Fix hangs after switching from full to half duplexAnton Vorontsov
MPC8360 QE UCC ethernet controllers hang when changing link duplex under a load (a bit of NFS activity is enough). PHY: mdio@e0102120:00 - Link is Up - 1000/Full sh-3.00# ethtool -s eth0 speed 100 duplex half autoneg off PHY: mdio@e0102120:00 - Link is Down PHY: mdio@e0102120:00 - Link is Up - 100/Half NETDEV WATCHDOG: eth0 (ucc_geth): transmit queue 0 timed out ------------[ cut here ]------------ Badness at c01fcbd0 [verbose debug info unavailable] NIP: c01fcbd0 LR: c01fcbd0 CTR: c0194e44 ... The cure is to disable the controller before changing speed/duplex and enable it afterwards. Though, disabling the controller might take quite a while, so we better not grab any spinlocks in adjust_link(). Instead, we quiesce the driver's activity, and only then disable the controller. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-11ucc_geth: Rearrange some code to avoid forward declarationsAnton Vorontsov
We'll need ugeth_disable() and ugeth_enable() calls earlier in the file, so rearrange some code to avoid forward declarations. The patch doesn't contain any functional changes. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Acked-by: Timur Tabi <timur@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-11phy/marvell: Make non-aneg speed/duplex forcing work for 88E1111 PHYsAnton Vorontsov
According to specs, when auto-negotiation is disabled, Marvell PHYs need a software reset after changing speed/duplex forcing bits. Otherwise, the modified bits have no effect. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-11drivers/net/phy: introduce missing kfreeJulia Lawall
Error handling code following a kzalloc should free the allocated data. The semantic match that finds the problem is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @r exists@ local idexpression x; statement S; expression E; identifier f,f1,l; position p1,p2; expression *ptr != NULL; @@ x@p1 = \(kmalloc\|kzalloc\|kcalloc\)(...); ... if (x == NULL) S <... when != x when != if (...) { <+...x...+> } ( x->f1 = E | (x->f1 == NULL || ...) | f(...,x->f1,...) ) ...> ( return \(0\|<+...x...+>\|ptr\); | return@p2 ...; ) @script:python@ p1 << r.p1; p2 << r.p2; @@ print "* file: %s kmalloc %s return %s" % (p1[0].file,p1[0].line,p2[0].line) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-11drivers/net/wan: introduce missing kfreeJulia Lawall
Error handling code following a kmalloc should free the allocated data. The semantic match that finds the problem is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @r exists@ local idexpression x; statement S; expression E; identifier f,f1,l; position p1,p2; expression *ptr != NULL; @@ x@p1 = \(kmalloc\|kzalloc\|kcalloc\)(...); ... if (x == NULL) S <... when != x when != if (...) { <+...x...+> } ( x->f1 = E | (x->f1 == NULL || ...) | f(...,x->f1,...) ) ...> ( return \(0\|<+...x...+>\|ptr\); | return@p2 ...; ) @script:python@ p1 << r.p1; p2 << r.p2; @@ print "* file: %s kmalloc %s return %s" % (p1[0].file,p1[0].line,p2[0].line) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-11net: force bridge module(s) to be GPLStephen Hemminger
The only valid usage for the bridge frame hooks are by a GPL components (such as the bridge module). The kernel should not leave a crack in the door for proprietary networking stacks to slip in. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-11Subject: [PATCH] appletalk: Fix skb leak when ipddp interface is not loadedArnaldo Carvalho de Melo
And also do a better job of returning proper NET_{RX,XMIT}_ values. Based on a patch and suggestions by Mark Smith. This fixes CVE-2009-2903 Reported-by: Mark Smith <lk-netdev@lk-netdev.nosense.org> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-11net: unix: fix sending fds in multiple buffersMiklos Szeredi
Kalle Olavi Niemitalo reported that: "..., when one process calls sendmsg once to send 43804 bytes of data and one file descriptor, and another process then calls recvmsg three times to receive the 16032+16032+11740 bytes, each of those recvmsg calls returns the file descriptor in the ancillary data. I confirmed this with strace. The behaviour differs from Linux 2.6.26, where reportedly only one of those recvmsg calls (I think the first one) returned the file descriptor." This bug was introduced by a patch from me titled "net: unix: fix inflight counting bug in garbage collector", commit 6209344f5. And the reason is, quoting Kalle: "Before your patch, unix_attach_fds() would set scm->fp = NULL, so that if the loop in unix_stream_sendmsg() ran multiple iterations, it could not call unix_attach_fds() again. But now, unix_attach_fds() leaves scm->fp unchanged, and I think this causes it to be called multiple times and duplicate the same file descriptors to each struct sk_buff." Fix this by introducing a flag that is cleared at the start and set when the fds attached to the first buffer. The resulting code should work equivalently to the one on 2.6.26. Reported-by: Kalle Olavi Niemitalo <kon@iki.fi> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-10Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/kaber/nf-next-2.6
2009-09-09dm9000: Use resource_size instead of private macroTobias Klauser
The macro res_size in drivers/net/dm9000.c is a copy of resource_size in linux/ioport.h. Remove the function and use resource_size instead. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-09dm9000: Remove unnecessary memset of netdev private dataTobias Klauser
The memory for the private data is allocated using kzalloc in alloc_etherdev (or alloc_netdev_mq respectively) so there is no need to set it to 0 again. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-09netxen: fix tx descriptor structureAmit Kumar Salecha
Fix the offset of vlan_TCI field in cmd_desc_type0. Signed-off-by: Amit Kumar Salecha <amit@qlogic.com> Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-09netxen: fix check for ip addr hashing supportAmit Kumar Salecha
Fix typo in checking dest ip has support before programming destip addresses. Signed-off-by: Amit Kumar Salecha <amit@netxen.com> Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-09net_sched: fix estimator lock selection for mq child qdiscsPatrick McHardy
When new child qdiscs are attached to the mq qdisc, they are actually attached as root qdiscs to the device queues. The lock selection for new estimators incorrectly picks the root lock of the existing and to be replaced qdisc, which results in a use-after-free once the old qdisc has been destroyed. Mark mq qdisc instances with a new flag and treat qdiscs attached to mq as children similar to regular root qdiscs. Additionally prevent estimators from being attached to the mq qdisc itself since it only updates its byte and packet counters during dumps. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-09Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6
2009-09-09cfg80211: allow scanning on specified frequencies when using wext-compatibilityHolger Schurig
Handles the case when SIOCSIWSCAN specified iw_scan_req.num_channels and iw_scan_req.channels[]. Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-09ath9k: Initialize the priority gpio for BT coex 3-wireVasanthakumar Thiagarajan
Oops, a stupid mistake in the original patch which adds coex 3-wire support. Bluetooth priority gpio needs to be gpio 7. Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-09ath9k: Get rid of the modparam btcoex_enableVasanthakumar Thiagarajan
Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-09ath9k: Enable btcoex based on the subsystem id of the deviceVasanthakumar Thiagarajan
Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-09ath9k: Store subsystem id in struct hw_versionVasanthakumar Thiagarajan
This subsystem id will be used later to turn on the btcoex support. Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-09wireless: mark prism54 as deprecated and mark for removalLuis R. Rodriguez
The preferred module is p54pci which also supports FullMAC PCI / Cardbus devices. We schedule removal for 2.6.34. Reason to remove this is no one really is testing prism54 anymore, and while it works p54pci provides support for the same hardware. It should be noted I have been told some FullMAC devices may not have worked with the SoftMAC driver but to date we have yet to recieve a single bug report regarding this. If there are users out there please let us know! Cc: aquilaver@yahoo.com Cc: linux-kernel@vger.kernel.org Cc: Dan Williams <dcbw@redhat.com> Cc: Kai Engert <kengert@redhat.com> Cc: Jean Tourrilhes <jt@hpl.hp.com> Cc: Tim de Waal<tim.dewaal@yahoo.com> Cc: Roy Marples <uberlord@gentoo.org> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Christian Lamparter <chunkeey@web.de> Cc: Björn Steinbrink <B.Steinbrink@gmx.de> Cc: Tim Gardner <tim.gardner@canonical.com> Cc: Larry Finger <Larry.Finger@lwfinger.net> Cc: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-09b44/b43/b43legacy: Fix switch warnings introduced by SSB-SDIOMichael Buesch
This fixes some gcc warnings for switch statements. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-09ssb: Implement SDIO host bus supportAlbert Herranz
Add support for communicating with a Sonics Silicon Backplane through a SDIO interface, as found in the Nintendo Wii WLAN daughter card. The Nintendo Wii WLAN card includes a custom Broadcom 4318 chip with a SDIO host interface. Signed-off-by: Albert Herranz <albert_herranz@yahoo.es> Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-09ath9k: Remove unnecessary casting to u8 in pci_read_config_byte() callVasanthakumar Thiagarajan
Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-09ath9k: Disable ASPM when btcoex is activeVasanthakumar Thiagarajan
Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-09MAINTAINERS: Add Atheros Linux wireless drivers home pageJoe Perches
On Sun, 2009-09-06 at 12:26 -0700, Luis R. Rodriguez wrote: > On Sun, Sep 6, 2009 at 10:59 AM, Joe Perches<joe@perches.com> wrote: > > On Thu, 2009-09-03 at 15:54 -0700, Luis R. Rodriguez wrote: > >> I'm pleased to announce the new home page to Atheros Linux wireless drivers: > >> http://wireless.kernel.org/en/users/Drivers/Atheros > > Perhaps add this to MAINTAINERS? > Fine by me, except ath5k and ath9k also have their own respective page > so those can also be added. (cc's trimmed and maintainers added) Perhaps this instead: Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Luis R. Rodriguez <mcgrof@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-09b43: Fix sparse warning in hw-tkip codeMichael Buesch
This fixes a sparse warning in the hardware-TKIP code: drivers/net/wireless/b43/xmit.c:272:18: warning: incorrect type in assignment (different base types) drivers/net/wireless/b43/xmit.c:272:18: expected unsigned short [unsigned] [short] <noident> drivers/net/wireless/b43/xmit.c:272:18: got restricted unsigned short [usertype] <noident> The code should work correctly with and without this patch applied. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-09b43: Really disable QoS, if requestedMichael Buesch
Currently, when QoS-disable is requested, we would leave QoS enabled in firmware, but only queue frames on one queue. Change that and also tell firmware about disabled QoS, so it completely ignores all the QoS parameters. Also don't upload the parameters, if QoS is disabled. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-09rt2x00: Hardcode TX ack timeout and consume timeIvo van Doorn
The calculated values for the ACK timeout and ACK consume time are different then the values as used by the Legacy drivers. After testing from James Ledwith it appeared that the calculated values caused a high amount of TX failures, and the values from the Legacy drivers were the most optimal to prevent TX failure due to excessive retries. The symptoms of this problem: - Rate control module always falls back to 1Mbs - Low throughput when bitrate was fixed Possible side-effects (not confirmed but highly likely) - Problems with DHCP - Broken connections due to lack of probe response This should fix at least: Kernel bugzilla reports: [13362], [13009], [9273] Fedora bugzilla reports: [443203] but possible some additional bugs as well. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-09headers: net/ipv[46]/protocol.c header trimAlexey Dobriyan
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-09IPv6/addrconf: Fix minor addrlabel thinko Tushar Gohad
Fix apparent thinko related to RTM_DELADDRLABEL, introduced by commit 2a8cc6c89039e0530a3335954253b76ed0f9339a ("[IPV6] ADDRCONF: Support RFC3484 configurable address selection policy table."). Signed-off-by: Tushar Gohad <tgohad@mvista.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-09niu: Use resource_size instead of private functionTobias Klauser
The function res_size in drivers/net/niu.c is a copy of resource_size in linux/ioport.h. Remove the function and use resource_size instead. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-08b43: PCMCIA is not experimental anymoreMichael Buesch
PCMCIA support works well and is not experimental anymore. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-08ath,ar9170: implemented conformance test limit calc. for tx powerJoerg Albert
apply the conformance test limits (CTL) stored in the eeprom upon the values calculated for the tx power (ar->power_*). This is based on the implementation in the vendor driver (hal/hpmain.c, line 3700 ff.) with one difference: If any ctl mode isn't found in the eeprom, we fall back to the "lower", legacy modes (5GHT20,11A or 2GHT20,11G,11B). Otus only did 5GHT20->11A. Currently CTL are applied for the FCC group only. Signed-off-by: Joerg Albert <jal2@gmx.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-08ath,ar9170: move CTL_ defines into regd.hJoerg Albert
The ar9170 driver needs the defines for conformance test limit groups and cannot include regd_common.h Signed-off-by: Joerg Albert <jal2@gmx.de> Acked-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-08ssb: Fail ssb modinit, if attach of the buses failed.Michael Buesch
SSB modinit should not succeed, if busattach failed. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-08b43: remove SHM spinlockMichael Buesch
This removes the SHM spinlock. SHM is protected by wl->mutex. Signed-off-by: Michael Buesch <mb@bu3sch.de> Tested-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-08b43: Remove PIO RX workqueueMichael Buesch
This removes the PIO RX work. It's not needed anymore, because we can sleep in the threaded interrupt handler. Signed-off-by: Michael Buesch <mb@bu3sch.de> Tested-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-08b43: Remove DMA/PIO queue locksMichael Buesch
This removes the DMA/PIO queue locks. Locking is handled by wl->mutex now. Signed-off-by: Michael Buesch <mb@bu3sch.de> Tested-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-29 07:02:30 +0000