aboutsummaryrefslogtreecommitdiff
path: root/arch/arm/mach-pxa
AgeCommit message (Collapse)Author
2010-03-12Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (370 commits) ARM: S3C2443: Add set_rate and round_rate calls for armdiv clock ARM: S3C2443: Remove #if 0 for clk_mpll ARM: S3C2443: Update notes on MPLLREF clock ARM: S3C2443: Further clksrc-clk conversions ARM: S3C2443: Change to using plat-samsung clksrc-clk implementation USB: Fix s3c-hsotg build following Samsung platform header moves ARM: S3C64XX: Reintroduce unconditional build of audio device ARM: 5961/1: ux500: fix CLKRST addresses ARM: 5977/1: arm: Enable backtrace printing on oops when PC is corrupted ASoC: Fix S3C64xx IIS driver for Samsung header reorg ARM: S3C2440: Fix plat-s3c24xx move of s3c2440/s3c2442 support [ARM] pxa: fix typo in mxm8x10.h [ARM] pxa/raumfeld: set GPIO drive bits for LED pins [ARM] pxa/zeus: Add support for mcp2515 CAN bus [ARM] pxa/zeus: Add support for onboard max6369 watchdog [ARM] pxa/zeus: Add Eurotech as the manufacturer [ARM] pxa/zeus: Correct the USB host initialisation flags [ARM] pxa/zeus: Allow usage of 8250-compatible UART in uncompress [ARM] pxa: refactor uncompress.h for non-PXA uarts [ARM] mmp2: fix incorrect calling of chip->mask_ack() for 2nd level cascaded IRQs ...
2010-03-12dma-mapping: arm: use generic pci_set_dma_mask and pci_set_consistent_dma_maskFUJITA Tomonori
This converts arm to the generic pci_set_dma_mask and pci_set_consistent_dma_mask (removes HAVE_ARCH_PCI_SET_DMA_MASK for dmabounce). Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Looked-over-by: Russell King <rmk+kernel@arm.linux.org.uk> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Cc: Greg KH <greg@kroah.com> Cc: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-12broadsheetfb: add multiple panel type supportJaya Kumar
Update broadsheetfb to add support for multiple panel types. The 3.7" and 6" are known to work but the 9.7" is untested due to lack of hardware. Signed-off-by: Jaya Kumar <jayakumar.lkml@gmail.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Krzysztof Helt <krzysztof.h1@wp.pl> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-08Merge branch 'origin' into devel-stableRussell King
Conflicts: arch/arm/mach-mx2/devices.c arch/arm/mach-mx2/devices.h sound/soc/pxa/pxa-ssp.c
2010-03-07platform-drivers: move probe to .devinit.text in arch/armUwe Kleine-König
A pointer to a probe callback is passed to the core via platform_driver_register and so the function must not disappear when the .init sections are discarded. Otherwise (if also having HOTPLUG=y) unbinding and binding a device to the driver via sysfs will result in an oops as does a device being registered late. An alternative to this patch is using platform_driver_probe instead of platform_driver_register plus removing the pointer to the probe function from the struct platform_driver. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Dmitry Baryshkov <dbaryshkov@gmail.com> Cc: Eric Miao <eric.miao@marvell.com> Cc: Liam Girdwood <liam.girdwood@wolfsonmicro.com> Cc: Paul Sokolovsky <pmiscml@gmail.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Russell King <rmk+kernel@arm.linux.org.uk> Acked-by: Arnaud Patard <arnaud.patard@rtp-net.org> Acked-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Acked-by: Kristoffer Ericson <kristoffer.ericson@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-02[ARM] pxa: fix typo in mxm8x10.hEric Miao
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-03-02[ARM] pxa/raumfeld: set GPIO drive bits for LED pinsDaniel Mack
Set GPIO bits to pull the pins connected to LEDs for lower power mode. We want all LEDs off when devices are in suspend. Signed-off-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-03-02[ARM] pxa/zeus: Add support for mcp2515 CAN busMarc Zyngier
Signed-off-by: Marc Zyngier <maz@misterjones.org> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-03-02[ARM] pxa/zeus: Add support for onboard max6369 watchdogMarc Zyngier
Signed-off-by: Marc Zyngier <maz@misterjones.org> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-03-02[ARM] pxa/zeus: Add Eurotech as the manufacturerMarc Zyngier
Signed-off-by: Amit Walambe <amit.walambe@eurotech.com> Signed-off-by: Marc Zyngier <maz@misterjones.org> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-03-02[ARM] pxa/zeus: Correct the USB host initialisation flagsMarc Zyngier
Signed-off-by: Amit Walambe <amit.walambe@eurotech.com> Signed-off-by: Marc Zyngier <maz@misterjones.org> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-03-02[ARM] pxa/zeus: Allow usage of 8250-compatible UART in uncompressMarc Zyngier
Zeus console port is wired to a 8250-compatible device (pxa UARTs are reserved to other uses). This patch allows such a configuration in the uncompress sequence. Signed-off-by: Marc Zyngier <maz@misterjones.org> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-03-02[ARM] pxa: refactor uncompress.h for non-PXA uartsEric Miao
The original patch came from Marc Zyngier where support of 8250-compatible UART is required to show the uncompress information. Modified a little bit here, including changes below: 1. #include <mach/regs-uart.h> is actually not necessary 2. introduced uart_{read,write}() for different base and shift 3. introduced uart_is_enabled() and assumed enabled always for non-PXA uarts Signed-off-by: Eric Miao <eric.y.miao@gmail.com> Acked-by: Marc Zyngier <maz@misterjones.org>
2010-03-02[ARM] pxa/imote2: Remove redundant pin entry for nCS.Stefan Schmidt
Also remove a trailing whitespace while being there. Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-03-02[ARM] pxa: introduce PXA_SSP_LEGACY for legacy SSP APIEric Miao
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-03-02[ARM] pxa: define zeus_power_off() only when CONFIG_PM enabledStefan Schmidt
Add some safety check for CONFIG_PM around zeus_power_off(). Without it linking can fail like this: arch/arm/mach-pxa/built-in.o: In function `zeus_power_off': e800.c:(.text+0x2bc8): undefined reference to `pxa27x_cpu_suspend' Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org> Acked-by: Marc Zyngier <maz@misterjones.org> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-03-02[ARM] pxa: add support for Embedian MXM-8x10Edwin Peer
Signed-off-by: Edwin Peer <epeer@tmtservices.co.za> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-03-02[ARM] pxa: move board board IRQ definitions out of irqs.hEric Miao
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-03-02[ARM] sa1111: allow cascaded IRQs to be used by platformsEric Miao
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-03-02[ARM] locomo: allow cascaded IRQ base to be specified by platformsEric Miao
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-03-02[ARM] locomo: remove unused IRQs and avoid unnecessary cascadeEric Miao
IRQ_LOCOMO_* are never used elsewhere, remove these definitions. As well as the cascade of these IRQs. IRQ_LOCOMO_*_BASE changed to IRQ_LOCOMO_*. IRQ_LOCOMO_LT and IRQ_LOCOMO_SPI are likely to be used in a same way as IRQ_LOCOMO_KEY. IRQ_LOCOMO_GPIO and the demultiplex handler should really be living somewhere else. Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-03-02[ARM] locomo: avoid unnecessary cascaded keyboard IRQEric Miao
It is not necessary and is over-complicated for IRQ_LOCOMO_KEY to be a cascaded IRQ of IRQ_LOCOMO_KEY_BASE. Removed and introduced locomokbd_{open,close} for masking/unmasking of the keyboard IRQ. Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-03-02[ARM] pxa/tosa: make use of the matrix keypad driverEric Miao
Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-03-02[ARM] pxa/cm-x270: avoid direct access of GPIO/MFP registersEric Miao
Cc: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-03-02[ARM] pxa: add the missing AC97 pin configurationsEric Miao
Missing AC97 pin configurations are added where pxa_set_ac97_info() are called for all pxa25x/pxa27x platforms. Where no exact configuration is provided, use the default as in sound/arm/pxa2xx-ac97-lib.c Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-03-02[ARM] pxa: introduce processor specific pxa27x_assert_ac97reset()Eric Miao
This is really pxa27x specific and should be kept in pxa27x.c. With this newly introduced function, the original set_resetgpio_mode() is deprecated. Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-03-02[ARM] pxa: simplify the LCD pin configuration for pxa27x platformsEric Miao
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-03-02[ARM] pxa: simplify the LCD pin configuration for pxa25x platformsEric Miao
There are only limited possible LCD pin configurations for pxa25x platforms, simplify this by macro. Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-03-02[ARM] pxa: use chip->ack() instead of accessing GEDR directlyEric Miao
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-03-01Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (100 commits) ARM: Eliminate decompressor -Dstatic= PIC hack ARM: 5958/1: ARM: U300: fix inverted clk round rate ARM: 5956/1: misplaced parentheses ARM: 5955/1: ep93xx: move timer defines into core.c and document ARM: 5954/1: ep93xx: move gpio interrupt support to gpio.c ARM: 5953/1: ep93xx: fix broken build of clock.c ARM: 5952/1: ARM: MM: Add ARM_L1_CACHE_SHIFT_6 for handle inside each ARCH Kconfig ARM: 5949/1: NUC900 add gpio virtual memory map ARM: 5948/1: Enable timer0 to time4 clock support for nuc910 ARM: 5940/2: ARM: MMCI: remove custom DBG macro and printk ARM: make_coherent(): fix problems with highpte, part 2 MM: Pass a PTE pointer to update_mmu_cache() rather than the PTE itself ARM: 5945/1: ep93xx: include correct irq.h in core.c ARM: 5933/1: amba-pl011: support hardware flow control ARM: 5930/1: Add PKMAP area description to memory.txt. ARM: 5929/1: Add checks to detect overlap of memory regions. ARM: 5928/1: Change type of VMALLOC_END to unsigned long. ARM: 5927/1: Make delimiters of DMA area globally visibly. ARM: 5926/1: Add "Virtual kernel memory..." printout. ARM: 5920/1: OMAP4: Enable L2 Cache ... Fix up trivial conflict in arch/arm/mach-mx25/clock.c
2010-02-26pxa_camera: remove init() callbackAntonio Ospite
pxa_camera init() callback is sometimes abused to setup MFP for PXA CIF, or even to request GPIOs to be used by the camera *sensor*. These initializations can be performed statically in machine init functions. The current semantics for this init() callback is ambiguous anyways, it is invoked in pxa_camera_activate(), hence at device node open, but its users use it like a generic initialization to be done at module init time (configure MFP, request GPIOs for *sensor* control). Signed-off-by: Antonio Ospite <ospite@studenti.unina.it> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-25Merge branches 'clks' and 'pnx' into develRussell King
2010-02-25Merge branch 'misc2' into develRussell King
2010-02-15ARM: 5928/1: Change type of VMALLOC_END to unsigned long.Fenkart/Bostandzhyan
Makes it consistent with VMALLOC_START Tested-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Andreas Fenkart <andreas.fenkart@streamunlimited.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-02-15Merge branch 'arm/clock-event' of git://git.pengutronix.de/git/ukl/linux-2.6 ↵Russell King
into devel-stable
2010-02-15Merge branch 'for-rmk' of git://git.marvell.com/orion into devel-stableRussell King
Conflicts: arch/arm/Makefile
2010-02-12ARM: Consolidate clks_register() and similarRussell King
Most machine classes want some way to register a block of clk_lookup structures, and most do it by implementing a clks_register() type function which walks an array, or by open-coding a loop. Consolidate all this into clkdev_add_table(). Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Acked-by: Eric Miao <eric.y.miao@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-02-12ARM: 5910/1: ARM: Add tmp register for addruart and loadspTony Lindgren
Otherwise more complicated uart configuration won't be possible. We can use r1 for tmp register for both head.S and debug.S. NOTE: This patch depends on another patch to add the the tmp register into all debug-macro.S files. That can be done with: $ sed -i -e "s/addruart,rx|addruart, rx/addruart, rx, tmp/" arch/arm/*/include/*/debug-macro.S Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-01-27Merge branch 'for-rmk/samsung3' of git://git.fluff.org/bjdooks/linux into ↵Russell King
devel-stable
2010-01-22arm/{pxa,sa1100,nomadik}: Don't disable irqs in set_next_event and set_modeUwe Kleine-König
These functions are called with irqs already off. This commit removes the calls to raw_local_irq_save and raw_local_irq_restore on platforms that don't have to use a shared interrupt for their timekeeping. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-01-13[ARM] pxa: fix irq suspend/resume for pxa25xEric Miao
PXA25x does not have IPR registers, saving and restoring should happen only for pxa27x and pxa3xx. Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-01-13[ARM] pxa: fix the incorrect naming of AC97 reset pin config for pxa26xEric Miao
GPIO89_AC97_nRESET is really a PXA26x specific option and was incorrectly named. Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-01-13[ARM] pxa/corgi: fix incorrect default GPIO for UDC VbusEric Miao
There is no such GPIO for udc vbus sensing, put '-1' instead of default '0' as '0' does mean a valid GPIO. Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-01-08[ARM] pxa: fix strange characters in zaurus gpio .descCyril Hrubis
Somehow, strange characters made their way zaurus gpio .desc fields. Fix it. Signed-off-by: Pavel Machek <pavel@ucw.cz> Acked-by: Stanislav Brabec <utx@penguin.cz> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-01-04[ARM] pxa: fix compiler warnings of unused variable 'id' in cpu_is_pxa9*()Eric Miao
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-01-04[ARM] pxa: update pwm_backlight->notify() to include missed 'struct device *'Eric Miao
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-12-29[ARM] pxa/poodle: fix incorrect 'gpio_card_detect' of MMCEric Miao
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-12-29[ARM] pxa/zylonite: simplify reduntant gpio settings on mmc slotHaojian Zhuang
PXA mmc host driver supports card detect, read only and power gpio pin setting already. Zylonite platform driver needn't implement this any more. Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-12-29[ARM] pxa/zeus: provide power-source information when APM is enabledMarc Zyngier
Signed-off-by: Marc Zyngier <maz@misterjones.org> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-12-29[ARM] pxa/zeus: relax memory timings on Zeus ethernet portsMarc Zyngier
DM9000s on Zeus sometime fail under heavy load. Relaxing the timings a bit seems to be of a great help. Signed-off-by: Marc Zyngier <maz@misterjones.org> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-29 15:35:47 +0000