aboutsummaryrefslogtreecommitdiff
path: root/arch/powerpc/configs
AgeCommit message (Collapse)Author
2008-07-14powerpc/85xx: TQM8548: add missing support for RTC and LM75Wolfgang Grandegger
It adds the missing RTC node to tqm8548.dts and enables support for I2C, DS1307 and LM75 in the default configuration. Signed-off-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-06-30Merge branch 'linux-2.6'Paul Mackerras
2008-06-30Merge branch 'next' of ↵Paul Mackerras
master.kernel.org:/pub/scm/linux/kernel/git/jwboyer/powerpc-4xx
2008-06-16[POWERPC] Turn on ATA_SFF so we get SATA_SVW back in defconfigsPaul Mackerras
This enables CONFIG_ATA_SFF in the defconfigs that are intended to work on a G5 powermac, i.e. g5_defconfig and ppc64_defconfig. Since the support for the SATA cell in the K2 chipset is provided by the sata_svw.c driver, and that depends on CONFIG_ATA_SFF, we need to turn that and CONFIG_SATA_SVW back on so we can get to the hard disk on G5s. Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-06-11powerpc/4xx: Sam440ep supportGiuseppe Coviello
The Sam440ep is an high customizable general purpose mini-itx board, based on the AMCC 440EP and with a LatticeXP FPGA onboard. It's poduced by ACube Systems Srl (Bassano del Grappa, Italy), http://www.acube-systems.biz. Signed-off-by: Giuseppe Coviello <gicoviello@gmail.com> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2008-06-11powerpc/4xx: MTD support for the AMCC Taishan BoardImre Kaloz
Add support for the NOR flash found on the AMCC Taishan Board and enable MTD support in the defconfig. Signed-off-by: Imre Kaloz <kaloz@openwrt.org> Acked-by: Stefan Roese <sr@denx.de> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2008-06-10powerpc/83xx: new board support: MPC8360E-RDKAnton Vorontsov
This is patch adds board file, device tree, and defconfig for the new board, made by Freescale Semiconductor Inc. and Logic Product Development. Currently supported: 1. UEC{1,2,7,4}; 2. I2C; 3. SPI; 4. NS16550 serial; 5. PCI and miniPCI; 6. Intel NOR StrataFlash X16 64Mbit PC28F640P30T85; 7. Graphics controller, Fujitsu MB86277. Not supported in this patch: 1. StMICRO NAND512W3A2BN6E, 512 Mbit (supported with FSL UPM NAND driver); 2. FHCI USB (supported with FHCI driver). 3. QE Serial UCCs (tested to not work with ucc_uart driver, reason unknown, yet); 4. ADC AD7843 (tested to work, but support via device tree depends on major SPI rework, GPIO API, etc); Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-06-10powerpc/85xx: add board support for the TQM8548 modulesWolfgang Grandegger
This patch adds support for the TQM8548 modules from TQ-Components GmbH (http://www.tqc.de). Signed-off-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-06-10[POWERPC] 83xx: MPC837xRDB's VSC7385 ethernet switch isn't on the MDIO busAnton Vorontsov
MDIO-less PHYs should use CONFIG_FIXED_PHY driver and appropriate fixed-link property in the device tree. If not, ethernet will not work: e0024520:03 not found eth1: Could not attach to PHY IP-Config: Failed to open eth1 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-06-09[POWERPC] Updated Freescale PPC defconfigsKumar Gala
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-06-09[POWERPC] 8610: Update defconfig for MPC8610 HPCDTimur Tabi
Update the defconfig for the Freescale MPC8610 HPCD board. Enable module support. Disable support for all NICs except for the on-board ULI526x. Enable support for the Freescale DIU driver. Increase the maximum zone order to 12, so that the DIU driver can allocate physically-contiguous 5MB buffers. Enable SYSV IPC and OSS plugin support, which are needed for some OSS apps. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-06-09powerpc: Default configuration for C2KRemi Machet
Support for the C2K cPCI Single Board Computer from GEFanuc (PowerPC MPC7448 with a Marvell MV64460 chipset). All features of the board are not supported yet, but the board boots, flash works, all Ethernet ports are working and PCI devices are all found (USB and SATA on PCI1 do not work yet). Part 4 of 5: this is the default config for the board. In this configuration the kernel is going to try to boot from MTD partition 3 on the NOR flash (see c2k.dts for details about the partitioning of the flash). Signed-off-by: Remi Machet <rmachet@slac.stanford.edu> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-06-09Merge branch 'merge'Paul Mackerras
Conflicts: arch/powerpc/sysdev/fsl_soc.c
2008-06-02[POWERPC] 83xx: Add support for Analogue & Micro ASP837E boardBryan O'Donoghue
The following adds support for the Analogue & Micro ASP 8347E, running Redboot. http://www.analogue-micro.com/ASP8347.html Signed-off-by: Bryan O'Donoghue <bodonoghue@codehermit.ie> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-05-27[POWERPC] pasemi: update pasemi_defconfig, enable electra_cfOlof Johansson
Refresh pasemi_defconfig and enable ELECTRA_CF=y. Signed-off-by: Olof Johansson <olof@lixom.net>
2008-05-20[POWERPC] Update defconfigs for desktop/server systemsPaul Mackerras
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-05-13[POWERPC] 86xx: mpc8610_hpcd: add support for NOR and NAND flashesAnton Vorontsov
This patch adds device tree nodes for NOR and NAND flashes and places board-control node inside the localbus. defconfig and board file updated appropriately. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-05-13[POWERPC] 86xx: mpc8610_hpcd: use ULI526X driver for on-board ethernetAnton Vorontsov
As of current mainline tree, TULIP driver is unusable on MPC8610HPCD boards. There is a patch[1] floating around (and also included in the BSP), which tries to heal the situation, though the ethernet is still unusable. Practically it takes ages to mount NFS filesystem: VFS: Mounted root (nfs filesystem). Freeing unused kernel memory: 180k init nfs: server 10.0.0.2 not responding, still trying nfs: server 10.0.0.2 OK nfs: server 10.0.0.2 not responding, still trying nfs: server 10.0.0.2 not responding, still trying nfs: server 10.0.0.2 not responding, still trying nfs: server 10.0.0.2 not responding, still trying nfs: server 10.0.0.2 OK nfs: server 10.0.0.2 not responding, still trying So, instead of trying to add uli526x functionality into TULIP driver (which is already bloated enough), I fixed existing ULI526X driver and now it works perfectly well here. [1] http://www.bitshrine.org/gpp/0024-MPC8610-ETH-Lyra-native-ethernet.txt Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-05-02[POWERPC] PS3: Update ps3_defconfigGeoff Levand
Update ps3_defconfig. Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-04-29[POWERPC] mpc5200: defconfigs for CM5200, Lite5200B, Motion-PRO and TQM5200Bartlomiej Sieka
Board-specific defconfigs based on current mpc5200_defconfig, archival lite5200_defconfig, and [cm5200|motionpro|tqm5200]_defconfig from the linux-2.6-denx tree. Kernels build using these defconfigs were verified to boot with root filesystem mounted over NFS on Motion-PRO, TQM5200 and Lite5200B boards. CM5200 target was not tested due to hardware unavailability. Signed-off-by: Bartlomiej Sieka <tur@semihalf.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2008-04-29[POWERPC] mpc5200: add Phytec pcm030 board supports.hauer@pengutronix.de
Add board support for the Phytec pcm030 mpc5200b based board. It does not need any platform specific fixups and as such is handled as a mpc5200 simple platform. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2008-04-29[POWERPC] windfarm: Add PowerMac 12,1 supportÉtienne Bersac
This implements a new driver named windfarm_pm121, which drives the fans on PowerMac 12,1 machines : iMac G5 iSight (rev C) 17" and 20". It's based on the windfarm_pm81 driver from Benjamin Herrenschmidt. This includes fixes from David Woodhouse correcting the names of some of the sensors. Signed-off-by: Étienne Bersac <bersace@gmail.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-04-17[POWERPC] 83xx: Enable FCM NAND and OF partitions in defconfigKumar Gala
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-04-17[POWERPC] 86xx: Add defconfig for Wind River SBC8641D boardPaul Gortmaker
This adds a sample defconfig for the Wind River SBC8641D board, with SMP, PCI and NFS root enabled. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-04-17[POWERPC] 83xx: mpc8313erdb - Enable FCM NAND and OF partitions in defconfigScott Wood
Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-04-17[POWERPC] 85xx: Enable DMA engine on the MPC8544 DSSebastian Siewior
Add the device tree node for the DMA engine on 8544, publish the device and enable the driver in the defconfig. Signed-off-by: Sebastian Siewior <bigeasy@linutronix.de> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-04-17[POWERPC] 83xx/85xx: Reorganize defconfigsKumar Gala
Board specific defconfigs are useful, however with the ability to do multi-board defconfigs they aren't needed in the top level configs directory Move the 83xx/85xx board specific defconfigs to individual directories under arch/powerpc/configs. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-04-16[POWERPC] 4xx: Add ppc40x_defconfigJosh Boyer
Add a multi-board PowerPC 40x defconfig file Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2008-04-15[POWERPC] 4xx: Reorganize 4xx defconfigsJosh Boyer
Board specific defconfigs are useful, however with the ability to do multi-board defconfigs they aren't needed in the top level configs directory. Move the 4xx board specific defconfigs to individual directories under arch/powerpc/configs. Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2008-04-14Merge branch 'linux-2.6'Paul Mackerras
2008-04-07[POWERPC] Remove CONFIG_PCI_LEGACY from some configsStephen Rothwell
This will remove some build warnings and doesn't stop us building any drivers that we were building previously with these configs. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-04-05[POWERPC] 4xx: Add Canyonlands and Yosemite to multi-board defconfigJosh Boyer
Include the newly added Canyonlands and Yosemite ports in the mutli-board 440 defconfig. Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2008-04-01Merge branch 'powerpc-next' of ↵Paul Mackerras
master.kernel.org:/pub/scm/linux/kernel/git/galak/powerpc
2008-03-31[POWERPC] Fix defconfigs so we dont set both GENRTC and RTCLIBKumar Gala
The new rtc subsystem conflicts with genrtc so don't enable GENRTC if RTCLIB is enabled. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-03-31[POWERPC] 83xx: enable usb in 837x rdb and 83xx defconfigsKim Phillips
Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-03-26[POWERPC] 85xx: Emerson KSI8560 default configAlexandr Smirnov
Add default config for Emerson KSI8560 board. Signed-off-by: Alexandr Smirnov <asmirnov@ru.mvista.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-03-26[POWERPC] 4xx: Add Canyonlands defconfig fileStefan Roese
Signed-off-by: Stefan Roese <sr@denx.de> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2008-03-26Merge branch 'linux-2.6'Paul Mackerras
2008-03-26[POWERPC] maple: Enable ipr driver in defconfigNathan Lynch
Some machines supported by the maple platform have an Obsidian controller which can't be used without enabling CONFIG_IPR and the options on which it depends. Signed-off-by: Nathan Lynch <ntl@pobox.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-03-25[POWERPC] update pasemi_defconfigOlof Johansson
Disable GEN_RTC since it conflicts with the i2c rtc drivers registering, besides that keep most of the new defaults. Signed-off-by: Olof Johansson <olof@lixom.net>
2008-03-24[POWERPC] Update some defconfigsKumar Gala
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-03-20[POWERPC] Update some defconfigsPaul Mackerras
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-03-07[POWERPC] 8xx: Fix wrapper platform for adder875, and combine defconfigs.Scott Wood
This fixes the following bug: http://ozlabs.org/pipermail/linuxppc-dev/2008-February/051979.html Separate defconfigs are no longer needed now that CONFIG_DEVICE_TREE is gone. Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-02-16[POWERPC] 44x: Add multiplatform defconfigJosh Boyer
Add a multiboard defconfig for PowerPC 44x now that the wrapper can create the proper zImages for multiple boards. Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2008-02-15[POWERPC] 4xx: Update defconfigs for 2.6.25Josh Boyer
Update the 4xx defconfigs to remove WANT_DEVICE_TREE and add MTD_OF_PARTS where appropriate. Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2008-02-05[POWERPC] 83xx: Update mpc83xx_defconfigKim Phillips
Enable math emulation and ucc_geth and some PHYs mpc83xx boards use. Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-28[POWERPC] 83xx: rework platform KconfigKumar Gala
* Allow multiple boards to be selected in a single build * Removed Kconfig option '83xx' which existed only for compat with arch/ppc * Removed Kconfig option 'PPC_MPC836x' since its not used * Renamed Kconfig option 'MPC834x' to 'PPC_MPC834x' to match others * Added a multiplatform 83xx defconfig (mpc83xx_defconfig). Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-28[POWERPC] 85xx: rework platform KconfigKumar Gala
* Allow multiple boards to be selected in a single build * Removed Kconfig option '85xx' which existed only for compat with arch/ppc * Added a multiplatform 85xx defconfig (mpc85xx_defconfig). This builds all 85xx boards except sbc8560 and stx_gp3 since these to boards have board specific ifdef in driver code that may break all other boards Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-28[POWERPC] 83xx: add the mpc837x rdb defconfigKim Phillips
Signed-off-by: Joe D'Abbraccio <ljd015@freescale.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-28[POWERPC] 83xx: add the mpc8315 rdb defconfigKim Phillips
Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-13 07:48:38 +0000