aboutsummaryrefslogtreecommitdiff
path: root/arch/x86/kernel/nmi.c
AgeCommit message (Collapse)Author
2008-08-15x86, nmi: clean UP NMI watchdog failure messageIngo Molnar
clean up the failure message - and redirect people to bugzilla instead of lkml. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-15x86, NMI: fix watchdog failure messageAristeu Rozanski
> it just won't work at boot time - the second logic unit will be stuck: > > Booting processor 1/2 APIC 0x1 > Initializing CPU#1 > Calibrating delay using timer specific routine.. 5586.12 BogoMIPS (lpj=2793063) > CPU: Trace cache: 12K uops, L1 D cache: 16K > CPU: L2 cache: 1024K > CPU: Physical Processor ID: 0 > CPU: Processor Core ID: 1 > CPU1: Thermal monitoring enabled (TM1) > Intel(R) Pentium(R) D CPU 2.80GHz stepping 04 > Brought up 2 CPUs > testing NMI watchdog ... <4>WARNING: CPU#1: NMI appears to be stuck (0->0)! while at it... - fix that newline Signed-off-by: Aristeu Rozanski <aris@redhat.com> Cc: jvillalo@redhat.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-21Merge branches 'x86/urgent', 'x86/amd-iommu', 'x86/apic', 'x86/cleanups', ↵Ingo Molnar
'x86/core', 'x86/cpu', 'x86/fixmap', 'x86/gart', 'x86/kprobes', 'x86/memtest', 'x86/modules', 'x86/nmi', 'x86/pat', 'x86/reboot', 'x86/setup', 'x86/step', 'x86/unify-pci', 'x86/uv', 'x86/xen' and 'xen-64bit' into x86/for-linus
2008-07-20x86: add unknown_nmi_panic kernel parameterSimon Arlott
It's not possible to enable the unknown_nmi_panic sysctl option until init is run. It's useful to be able to panic the kernel during boot too, this adds a parameter to enable this option. Signed-off-by: Simon Arlott <simon@fire.lp0.eu> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-18x86: APIC: remove apic_write_around(); use alternativesMaciej W. Rozycki
Use alternatives to select the workaround for the 11AP Pentium erratum for the affected steppings on the fly rather than build time. Remove the X86_GOOD_APIC configuration option and replace all the calls to apic_write_around() with plain apic_write(), protecting accesses to the ESR as appropriate due to the 3AP Pentium erratum. Remove apic_read_around() and all its invocations altogether as not needed. Remove apic_write_atomic() and all its implementing backends. The use of ASM_OUTPUT2() is not strictly needed for input constraints, but I have used it for readability's sake. I had the feeling no one else was brave enough to do it, so I went ahead and here it is. Verified by checking the generated assembly and tested with both a 32-bit and a 64-bit configuration, also with the 11AP "feature" forced on and verified with gdb on /proc/kcore to work as expected (as an 11AP machines are quite hard to get hands on these days). Some script complained about the use of "volatile", but apic_write() needs it for the same reason and is effectively a replacement for writel(), so I have disregarded it. I am not sure what the policy wrt defconfig files is, they are generated and there is risk of a conflict resulting from an unrelated change, so I have left changes to them out. The option will get removed from them at the next run. Some testing with machines other than mine will be needed to avoid some stupid mistake, but despite its volume, the change is not really that intrusive, so I am fairly confident that because it works for me, it will everywhere. Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-15Merge branch 'generic-ipi' into generic-ipi-for-linusIngo Molnar
Conflicts: arch/powerpc/Kconfig arch/s390/kernel/time.c arch/x86/kernel/apic_32.c arch/x86/kernel/cpu/perfctr-watchdog.c arch/x86/kernel/i8259_64.c arch/x86/kernel/ldt.c arch/x86/kernel/nmi_64.c arch/x86/kernel/smpboot.c arch/x86/xen/smp.c include/asm-x86/hw_irq_32.h include/asm-x86/hw_irq_64.h include/asm-x86/mach-default/irq_vectors.h include/asm-x86/mach-voyager/irq_vectors.h include/asm-x86/smp.h kernel/Makefile Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-11x86: Recover timer_ack lost in the merge of the NMI watchdogMaciej W. Rozycki
In the course of the recent unification of the NMI watchdog an assignment to timer_ack to switch off unnecesary POLL commands to the 8259A in the case of a watchdog failure has been accidentally removed. The statement used to be limited to the 32-bit variation as since the rewrite of the timer code it has been relevant for the 82489DX only. This change brings it back. Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-08x86: nmi_watchdog - introduce nmi_watchdog_active() helperCyrill Gorcunov
Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com> Cc: macro@linux-mips.org Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-08x86: nmi_watchdog - use NMI_NONE by defaultCyrill Gorcunov
There is no need to keep NMI_DISABLED definition and use it for nmi_watchdog by default. Here is the point why: - IO-APIC and APIC chips are programmed for nmi_watchdog support at very early stage of kernel booting and not having nmi_watchdog specified as boot option lead only to nmi_watchdog becomes to NMI_NONE anyway - enable nmi_watchdog thru /proc/sys/kernel/nmi if it was not specified at boot is not possible too (even having this sysfs entry) Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com> Cc: macro@linux-mips.org Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-08x86: nmi_watchdog - remove useless checkCyrill Gorcunov
Since nmi_watchdog is unsigned variable we may safely remove the check for negative value. Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com> Cc: macro@linux-mips.org Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-08Merge branch 'x86/nmi' into x86/develIngo Molnar
Conflicts: arch/x86/kernel/nmi.c arch/x86/kernel/nmi_32.c Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-19x86: fix typo CONFIX -> CONFIGGlauber Costa
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-12x86: touch_nmi_watchdog(): reset alert counters for supported nmi_watchdog ↵Cyrill Gorcunov
modes only The checking 'if nmi_watchdog > 0' (ie NMI_NONE) is quite fast but it has a side effect - it's taken even if nmi_watchdog = NMI_DISABLED. Nowadays nmi_watchdog is set up to NMI_NONE by default so this condition is properly taken most the time but we better show this explicitly. Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-05x86, nmi: fix buildmingo@elte.hu
fix: arch/x86/kernel/built-in.o: In function `proc_nmi_enabled': : undefined reference to `nmi_watchdog_default' arch/x86/kernel/built-in.o: In function `native_smp_prepare_cpus': : undefined reference to `nmi_watchdog_default' Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-05x86: nmi - consolidate nmi_watchdog_default for 32bit modeCyrill Gorcunov
64bit mode bootstrap code does set nmi_watchdog to NMI_NONE by default and doing the same on 32bit mode is safe too. Such an action saves us from several #ifdef. Btw, my previous commit commit 19ec673ced067316b9732bc6d1c4ff4052e5f795 Author: Cyrill Gorcunov <gorcunov@gmail.com> Date: Wed May 28 23:00:47 2008 +0400 x86: nmi - fix incorrect NMI watchdog used by default did not fix the problem completely, moreover it introduced additional bug - nmi_watchdog would be set to either NMI_LOCAL_APIC or NMI_IO_APIC _regardless_ to boot option if being enabled thru /proc/sys/kernel/nmi_watchdog. Sorry for that. Fix it too. Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com> Cc: mingo@redhat.com Cc: hpa@zytor.com Cc: macro@linux-mips.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-06-02x86: fix nmi.c build bugIngo Molnar
apic.h needs to be included for the apic_write_around() definition.
2008-06-02x86: coding style fixes for nmi.cHiroshi Shimamoto
before total: 1 errors, 6 warnings, 534 lines checked after total: 0 errors, 1 warnings, 532 lines checked Signed-off-by: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-05-28x86: nmi - fix incorrect NMI watchdog used by defaultCyrill Gorcunov
The commit commit 4b82b277707a39b97271439c475f186f63ec4692 Author: Cyrill Gorcunov <gorcunov@gmail.com> Date: Sat May 24 19:36:35 2008 +0400 set nmi_watchdog to NMI_IO_APIC as by default. This causes hangs on some machines with buggy watchdogs. Fix it - i.e. restore old behaviour. Thanks to Sitsofe Wheeler and Adrian Bunk for catching the problem and Maciej W. Rozycki for explanation what is going on there. Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com> CC: Maciej W. Rozycki <macro@linux-mips.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-05-25x86: nmi_32/64.c - merge down nmi_32.c and nmi_64.c to nmi.cCyrill Gorcunov
Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com> Cc: hpa@zytor.com Cc: mingo@redhat.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>