aboutsummaryrefslogtreecommitdiff
path: root/drivers/ata
AgeCommit message (Collapse)Author
2008-01-23libata: Disable ATA8-ACS proposed Trusted Computing features by defaultAlan Cox
Historically word 48 in the identify data was used to mean 32bit I/O was supported for VLB IDE etc. ATA8 reassigns this word to the Trusted Computing Group, where it is used for TCG features. This means that an ATA8 TCG drive is going to trigger 32bit I/O on some systems which will be funny. Anyway we need to sort this out ready for ATA8 so: - Reorder the ata.h header a bit so the ata_version function occurs early in it - Make dword_io check the ATA version - Add an ATA8 version checking TCG presence test While we are at it the current drafts have a flaw where it may not be possible to disable TCG features at boot (and opt out of the trusted model) as TCG intends because it relies on presence of a different optional feature (DCS). Handle this in software by refusing the TCG commands if libata.allow_tpm is not set. (We must make it possible as some environments such as proprietary VDR devices will doubtless want to use it to lock up content) Finally as with CPRM print a warning so that the user knows they may not be able to full access and use the device. Signed-off-by: Alan Cox <alan@redhat.com>
2008-01-23ata_piix: Add Toshiba Satellite R20 and Tecra M6 to broken suspend list.Peter Schwenke
Add Toshiba Satellite R20 and Tecra M6 to broken suspend list. Matt Piermarini reported and provided the M6 patch. This is from OSDL bug 7780. Signed-off-by: Peter Schwenke <peter@bluetoad.com.au> Cc: Matt Piermarini <mattpiermarini@yahoo.com> Acked-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-01-19pata_pdc202xx_old: Fix crashes with ATAPIAlan Cox
The PDC202xx older devices do not support ATAPI DMA via the usual interfaces. What documentation I have isn't sufficient to support DMA and it isn't clear if the Windows drivers do this or it is possible at all. (Neither do the drivers/ide old drivers) So turn it ATAPI DMA off, these are disk optimised controllers. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-01-15[libata] core checkpatch fixAndrew Morton
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Jeff Garzik <jeff@garzik.org> Cc: Tejun Heo <htejun@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-01-15[libata] pata_bf54x: checkpatch fixesAndrew Morton
WARNING: line over 80 characters #36: FILE: drivers/ata/pata_bf54x.c:1512: + while (bfin_port_info[board_idx].udma_mask>0 && udma_fsclk[udma_mode] > fsclk) { ERROR: need spaces around that '>' (ctx:VxV) #36: FILE: drivers/ata/pata_bf54x.c:1512: + while (bfin_port_info[board_idx].udma_mask>0 && udma_fsclk[udma_mode] > fsclk) { ^ total: 1 errors, 1 warnings, 19 lines checked Your patch has style problems, please review. If any of these errors are false positives report them to the maintainer, see CHECKPATCH in MAINTAINERS. Please run checkpatch prior to sending patches Cc: Jeff Garzik <jeff@garzik.org> Cc: Sonic Zhang <sonic.zhang@analog.com> Cc: Tejun Heo <htejun@gmail.com> Cc: sonic zhang <sonic.adi@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-01-15libata fixes for sparse-found problemsAl Viro
In pata_legacy and pata_winbond we've got bugs - cpu_to_le16() instead of cpu_to_le32(). Fortunately, both affected suckers are VLB, thus l-e-only, so we might get away with that unless we hit it with slop == 3 (hadn't checked if playing with badly aligned sg could trigger that). Still buggy... Moreover, pata_legacy, pata_winbond and pata_qdi forgot to initialize pad on the write side of 32bit case in their ->data_xfer(). Hopefully the hardware does't care, but still, sending uninitialized data to it... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-01-14libata: relocate sdev->manage_start_stop configurationTejun Heo
After 9b8e8de7, manage_start_stop configuration depends on valid ATA device. Move it into ata_scsi_dev_config(). This was detected by the coverity checker. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Adrian Bunk <bunk@kernel.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-01-14sata_sil24: freeze on non-dev errors reported via CERRTejun Heo
CERR reports errors detected during executing a command. This doesn't mean the error is tied to the command and can be recovered by just issuing it again. Many of the errors are fatal port-wide connditions including HSM violation, host bus error and ATA bus error and require freezing and port reset. The freezing part wasn't implemented previously. This used to be okay because port resets were scheduled anyway and EH eventually resets and recovers the port. With PMP support added, this is no longer true. The error condition and recover actions are attributed to the fan-out port and the host port condition isn't properly recovered leading to EH failures. This patch makes CERR errors which require resets to freeze the port. This will force host port reset and proper recovery. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Andrew Ryder <tireman@shaw.ca> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-01-14sata_sil24: fix stupid typoTejun Heo
Fix stupid typo. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-01-14ata_piix: ignore ATA_DMA_ERR on vmware ich4Tejun Heo
VMware ich4 emulation incorrectly sets DMA_ERR on TF error. Ignore it. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-01-10libata and starting/stopping ATAPI floppy devicesOndrej Zary
Prevent libata from starting/stopping non-ATA devices (like ATAPI floppy drives) as they don't seem to like it: sd 1:0:1:0: [sdb] Starting disk ata2.01: configured for PIO2 sd 1:0:1:0: [sdb] Result: hostbyte=0x00 driverbyte=0x08 sd 1:0:1:0: [sdb] Sense Key : 0x2 [current] sd 1:0:1:0: [sdb] ASC=0x3a ASCQ=0x0 Signed-off-by: Ondrej Zary <linux@rainbow-software.org> Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-01-10sata_sil24: prevent hba lockup when pass-through ATA commands are usedGwendal Grignou
Fix commands timeout with Sil3124/3132 based HBA when pass-through ATA commands [where ATA_QCFLAG_RESULT_TF is set] are used while other commands are active on other devices connected to the same port with a Port Multiplier. Due to a hardware bug, these commands must be sent alone, like ATAPI commands. Signed-off-by: Gwendal Grignou <gwendal@google.com> Acked-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-01-10libata: don't normalize UNKNOWN to NONE after resetTejun Heo
After non-classifying reset, ehc->classes[] could contain ATA_DEV_UNKNOWN which used to be normalized to ATA_DEV_NONE for consistency. However, this causes unfortunate side effect for drivers which have non-classifying hardresets (e.g. sata_nv) by making hardreset report ATA_DEV_NONE for non-classifying resets and thus makes EH believe that the port is unoccupied and recovery can be skipped. The end result is that after a device is swapped with another one, the new device isn't attached after the old one is detached. This patch makes ata_eh_reset() not normalize UNKNOWN to NONE after non-classifying resets. This fixes the above problem. As UNKNOWN and NONE are handled differently by only EH hotplug logic, this doesn't cause other behavior changes. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Robert Hancock <hancockr@shaw.ca> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-01-10libata-pmp: propagate timeout to host linkTejun Heo
Timeout on downstream command may indicate transmission problem on host link. Propagate timeouts to host link. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-01-10libata-pmp: 4726 hates SRSTTejun Heo
4726 hates SRST even on non-config ports. Don't use it. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-01-10pata_ixp4xx_cf: fix compilation introduced by ata_port_desc() conversionRod Whitby
Fixes a compilation error caused by ata_port_desc() conversion (cbcdd87593a1d85c5c4b259945a3a09eee12814d). Signed-off-by: Rod Whitby <rod@whitby.id.au> Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-01-10pata_pdc202xx_old: Further fixupsAlan Cox
Turns out distros always enabled burst mode and it is pretty essential so do the same. Also sort out the post DMA mode restore properly. My 20263 card now seems happy but needs some four drive tests done yet (when I've persuaded the kernel not to hang in the edd boot code if I plug them in ..) Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-01-10libata-sff: PCI IRQ handling fixAlan Cox
It is legitimate (although annoying and silly) for a PCI IDE controller not to be assigned an interrupt and to be polled. The libata-sff code should therefore not try and request IRQ 0 in this case. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-01-10sata_qstor: use hardreset instead of softresetTejun Heo
During conversion to new EH, sata_qstor was accidentaly changed to use softreset, which is buggy on this chip, instead of hardreset. This patch updates sata_qstor such that it uses hardreset again. This fixes bugzilla bug 9631. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Mark Lord <mlord@pobox.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-12-19pata_hpt37x: Fix HPT374 detectionAlan Cox
Bug #9261 Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-12-17libata: fix ATAPI drainingTejun Heo
With ATAPI transfer chunk size properly programmed, libata PIO HSM should be able to handle full spurious data chunks. Also, it's a good idea to suppress trailing data warning for misc ATAPI commands as there can be many of them per command - for example, if the chunk size is 16 and the drive tries to transfer 510 bytes, there can be 31 trailing data messages. This patch makes the following updates to libata ATAPI PIO HSM implementation. * Make it drain full spurious chunks. * Suppress trailing data warning message for misc commands. * Put limit on how many bytes can be drained. * If odd, round up consumed bytes and the number of bytes to be drained. This gets the number of bytes to drain right for drivers which do 16bit PIO. This patch is partial backport of improve-ATAPI-data-xfer patchset pending for #upstream. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-12-17libata: update atapi_eh_request_sense() such that lbam/lbah contains buffer sizeTejun Heo
While updating lbam/h for ATAPI commands, atapi_eh_request_sense() was left out. Update it. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-12-17libata-acpi: implement _GTF command filteringTejun Heo
Implement _GTF command filtering which can be controlled by libata.acpi_filter kernel parameter. Currently SETXFER and LOCK commands are filtered. libata configures transfer mode by itself and _GTF SETXFER commands can potentially disrupt device configuration. _GTM/_STM mechanism can't handle hotplugging too well and when _GTF is executed, controller is in PIO0 rather than the mode _STM configured. Note that detecting SET MAX LOCK requires looking at the previous command. This adds a bit to code complexity. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-12-17libata-acpi: improve _GTF execution error handling and reportingTejun Heo
As _GTF commands can't transfer data, device error never signals transfer error. It indicates that the device vetoed the operation, so it's meaningless to retry. This patch makes libata-acpi to report and continue on device errors when executing _GTF commands. Also commands rejected by device don't contribute to the number of _GTF commands executed. While at it, update _GTF execution reporting such that all successful commands are logged at KERN_DEBUG and rename taskfile_load_raw() to ata_acpi_run_tf() for consistency. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-12-17libata-acpi: improve ACPI disablingTejun Heo
* If _GTF evalution fails, it's pointless to retry. If nothing else is wrong, just ignore the error. * After disabling ACPI, return success iff the number of executed _GTF command equals zero. Otherwise, tell EH to retry. This change fixes bogus 1 return bug where ata_acpi_on_devcfg() expects the caller to reload IDENTIFY data and continue but the caller interprets it as an error. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-12-17libata-acpi: implement dev->gtf_cache and evaluate _GTF right after _STM ↵Tejun Heo
during resume On certain implementations, _GTF evaluation depends on preceding _STM and both can be pretty picky about the configuration. Using _GTM result cached during controller initialization satisfies the most neurotic _STM implementation. However, libata evaluates _GTF after reset during device configuration and the hardware state can be different from what _GTF expects and can cause evaluation failure. This patch adds dev->gtf_cache and updates ata_dev_get_GTF() such that it uses the cached value if available. Cache is cleared with a call to ata_acpi_clear_gtf(). Because for SATA ACPI nodes _GTF must be evaluated after _SDD which can't be done till IDENTIFY is complete, _GTF caching from ata_acpi_on_resume() is used only for IDE ACPI nodes. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-12-17libata-acpi: implement and use ata_acpi_init_gtm()Tejun Heo
_GTM fetches currently configured transfer mode while _STM configures controller according to _GTM parameter and prepares transfer mode configuration TFs for _GTF. In many cases _GTM and _STM implementations are quite brittle and can't cope with configuration changed by libata. libata does not depend on ATA ACPI to configure devices. The only reason libata performs _GTM and _STM are to make _GTF evaluation succeed and libata also doesn't care about how _GTF TFs configure transfer mode. It overrides that configuration anyway, so from libata's POV, it doesn't matter what value is feeded to _STM as long as evaluation succeeds for _STM and following _GTF. This patch adds dev->__acpi_init_gtm and store initial _GTM values on host initialization before modified by reset and mode configuration. If the field is valid, ata_acpi_init_gtm() returns pointer to the saved _GTM structure; otherwise, NULL. This saved value is used for _STM during resume and peek at BIOS/firmware programmed initial timing for later use. The accessor is there to make building w/o ACPI easy as dev->__acpi_init doesn't exist if ACPI is not enabled. On driver detach, the initial BIOS configuration is restored by executing _STM with the initial _GTM values such that the next driver can also use the initial BIOS configured values. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-12-17libata-acpi: add new hooks ata_acpi_dissociate() and ata_acpi_on_disable()Tejun Heo
Add two hooks - ata_acpi_dissociate() which is called during driver detach after the whole host is shutdown and ata_acpi_on_disable() which is called when a device is disabled. Signed-off-by: Tejun heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-12-17libata: ata_dev_disable() should be called from EH contextTejun Heo
ata_port_detach() calls ata_dev_disable() with host lock held but ata_dev_disable() should be called from EH context. ata_port_detach() steals EH context by setting ATA_PFLAG_UNLOADAING and flushing EH. Drop locking around ata_dev_disable() and note that ata_port_detach() owns EH context at that point. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-12-17libata-acpi: adjust constness in ata_acpi_gtm/stm() parametersTejun Heo
* No internal function uses const ata_port. Drop const from @ap. * Make ata_acpi_stm() copy @stm before using it and change @stm to const. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-12-17sata_mv: improve warnings about Highpoint RocketRAID 23xx cardsMark Lord
Improve the existing boot/load time warnings from sata_mv for Highpoint RocketRAID 23xx cards, based on new knowledge about where the BIOS likes to overwrite sectors with metadata. Harmless to us, but very useful for end users. Signed-off-by: Mark Lord <mlord@pobox.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-12-17libata: add ST3160023AS / 3.42 to NCQ blacklistTejun Heo
Like ST380817AS / 3.42, ST3160023AS / 3.42 times out commands if NCQ is used. Blacklist it. This is reported by Matheus Izvekov in the following thread. http://thread.gmane.org/gmane.linux.ide/24202 Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Matheus Izvekov <mizvekov@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-12-17libata: clear link->eh_info.serror from ata_std_postreset()Tejun Heo
link->eh_info.serror is used to cache SError for controllers which need it cleared from interrupt handler to clear IRQ. It also should be cleared after reset just like SError itself. Make ata_std_postreset() clear link->eh_info.serror too and update sata_sil such that it doesn't care about bookkeeping the value. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-12-17sata_sil: fix spurious IRQ handlingTejun Heo
Interestingly, sata_sil raises spurious interrupts if it's coupled with Sil SATA_PATA bridge. Currently, sata_sil interrupt handler is strict about spurious interrupts and freezes the port when it occurs. This patch makes it more forgiving. * On SATA PHY event interrupt, serror value is checked to see whether it really is PHYRDY CHG event. If not, SATA PHY event interrupt is ignored. * If ATA interrupt occurs while no command is in progress, it's cleared and ignored. This fixes bugzilla bug 9505. http://bugzilla.kernel.org/show_bug.cgi?id=9505 Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-12-07libata: kill spurious NCQ completion detectionTejun Heo
Spurious NCQ completion detection implemented in ahci was incorrect. On AHCI receving and processing FISes and raising interrupts are not interlocked and spurious interrupts are expected. For example, if an interrupt occurs while interrupt handler is running and the running interrupt handler handles the event the new IRQ indicated, after IRQ handler finishes, it will be executed again because IRQ pending bit is set by the new interrupt but there won't be anything to process. Please read the following message for more information. http://article.gmane.org/gmane.linux.ide/26012 This patch... * Removes all spurious IRQ whining from ahci. Spurious NCQ completion detection was completely wrong. Spurious D2H Register FIS taught us that some early drives send spurious D2H Register FIS with I bit set while NCQ commands are in progress but none of recent drives does that and even the ones which show such behavior can do NCQ fine. * Kills all NCQ blacklist entries which were added because of spurious NCQ completions. I tracked down each commit and verified all removed ones are actually added because of spurious completions. WD740ADFD-00NLR1 wasn't deleted but moved upward because the drive not only had spurious NCQ completions but also is slow on sequential data transfers if NCQ is enabled. Maxtor 7V300F0 was added by 0e3dbc01d53940fe10e5a5cfec15ede3e929c918 from Alan Cox. I can only find evidences that the drive only had troubles with spuruious completions by searching the mailing list. This entry needs to be verified and removed if it doesn't have other NCQ related problems. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-12-07ahci: don't attach if ICH6 is in combined modeTejun Heo
ICH6 R/Ms share PCI ID between piix and ahci modes and we've been allowing ahci to attach regardless of how BIOS configured it. However, enabling AHCI mode when the controller is in combined mode can result in unexpected behavior. Don't attach if the controller is in combined mode. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Bill Nottingham <notting@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-12-07ata_piix: add Toshiba Tecra M4 to broken suspend listPeter Schwenke
Add Toshiba Tecra M4 to broken suspend list. This is from OSDL bugzilla bug 7780. Signed-off-by: Peter Schwenke <peter@bluetoad.com.au> Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-12-07ahci: fix engine reset failed messageTejun Heo
There isn't much point in reporting -EOPNOTSUPP as failure. Also the message was missing newline. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-12-04pata_amd/pata_via: de-couple programming of PIO/MWDMA and UDMA timingsBartlomiej Zolnierkiewicz
* Don't program UDMA timings when programming PIO or MWDMA modes. This has also a nice side-effect of fixing regression added by commit 681c80b5d96076f447e8101ac4325c82d8dce508 ("libata: correct handling of SRST reset sequences") (->set_piomode method for PIO0 is called before ->cable_detect method which checks UDMA timings to get the cable type). * Bump driver version. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Tested-by: "Thomas Lindroth" <thomas.lindroth@gmail.com> Acked-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Tejun Heo <htejun@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-12-04ahci: add the Device IDs of MCP79 AHCI controller to ahci.cpeerchen
Add the device IDs of legacy mode of MCP79 AHCI controller to ahci.c Signed-off-by: Peer Chen <peerchen@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-12-04sata_mv: Warn about HPT RocketRAID BIOS treatment of "Legacy" drivesMark Lord
The Highpoint RocketRAID boards using Marvell 7042 chips overwrite the 9th sector of attached drives at boot time, when those drives are configured as "Legacy" (the default) in the HighPoint BIOS. This kills GRUB, and probably other stuff. But it all happens *before* Linux is even loaded. So, for now we'll log a WARNING when such boards are detected, and advise users to configure BIOS "JBOD" volumes instead, which don't appear to suffer from this problem. Signed-off-by: Mark Lord <mlord@pobox.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2007-12-04sata_nv: don't use legacy DMA in ADMA mode (v3)Robert Hancock
We need to run any DMA command with result taskfile requested in ADMA mode when the port is in ADMA mode, otherwise it may try to use the legacy DMA engine in ADMA mode which is not allowed. Enforce this with BUG_ON() since data corruption could potentially result if this happened. Also, fail any attempt to try and issue NCQ commands with result taskfile requested, since the hardware doesn't allow this. Signed-off-by: Robert Hancock <hancockr@shaw.ca> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-12-01sata_mv: Fix broken Marvell 7042 support.Mark Lord
sata_mv: Fix broken Marvell 7042 support. The Marvell 7042 chip is more or less the same as the 6042 internally, but sports a PCIe bus. Despite having identical SATA cores, the 7042 does differ from its PCI bus counterparts in placment and layout of certain bus related registers. This patch fixes sata_mv to distinguish between the PCI bus registers of earlier chips, and the PCIe bus registers of the 7042. Specifically, move the offsets and bit patterns for the PCI/PCIe interrupt cause/mask registers into the struct mv_host_priv, as these values differ between the 6xxx and 7xxx series chips. This fixes the driver to not access reserved PCI addresses, and prevents the lockups reported in linux-2.6.24 with 7042 boards. Also add a new PCI ID for the Highpoint 2300 7042-based board that I'm using for testing this stuff here. Tested with Marvell 6081 + 7042 chips, on x86 & x86_64. Signed-off-by: Mark Lord <mlord@pobox.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-12-01libata: Fix early use of port printk. (Was Re: ata4294967295: failed to ↵Alan Cox
start port (errno=-19)) On Fri, 30 Nov 2007 14:34:11 +0200 (EET) Meelis Roos <mroos@linux.ee> wrote: > > Can you stick a stack trace in at that point ? That would help diagnose > > it a great deal quicker. > > Finally done - found out hard way that BUG() is too bad and > dump_st5ack() suits me better. Thanks. This should fix the real cause, and also allow for port start to fail politely with -ENODEV. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-12-01ata_piix: add more toshiba laptops to broken suspend listPeter Schwenke
Add more toshiba laptops to broken suspend list. This is from OSDL bugzilla bug 7780. tj: re-formatted patch and added description and SOB. Signed-off-by: Peter Schwenke <peter@bluetoad.com.au> Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-12-01libata: More IVB horkage from TSSTPeter Missel
libata: Add more TSST (Samsung/Toshiba) IDE drives with broken cable detection validation bits. signed-off-by: Peter Missel (peter.missel@onlinehome.de) Acked-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-12-01libata: report protocol and full CDB on errorTejun Heo
Protocol and CDB allocation size field are important in determining what went wrong with ATAPI commands. Report them on failure. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-12-01Several fixes for the AVR32 PATA driverKristoffer Nyborg Gregertsen
Several fixes for the AVR32 PATA driver: * Updated to use new AVR32 SMC timing API. This removes the need for "magic" constants in signal timing. * Removed the ATA_FLAG_PIO_POLLING, the driver should use interrupts. * Removed .port_disable and .irq_ack as these are no longer needed. * Improved some comments. Signed-off-by: Kristoffer Nyborg Gregertsen <kngregertsen@norway.atmel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-12-01sata_mv: fix compilation error when enabling DEBUGSaeed Bishara
use sstatus instead status. Signed-off-by: Saeed Bishara <saeed@marvell.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-12-01Set proper ATA UDMA mode for bf548 according to system clock.sonic zhang
UDMA Mode - Frequency compatibility UDMA5 - 100 MB/s - SCLK = 133 MHz UDMA4 - 66 MB/s - SCLK >= 80 MHz UDMA3 - 44.4 MB/s - SCLK >= 50 MHz UDMA2 - 33 MB/s - SCLK >= 40 MHz Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>