aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/sky2.c
AgeCommit message (Collapse)Author
2009-09-03netdev: Remove redundant checks for CAP_NET_ADMIN in MDIO implementationsBen Hutchings
dev_ioctl() already checks capable(CAP_NET_ADMIN) before calling the driver's implementation of MDIO ioctls. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-03sky2: only enable Vaux if capable of wakeupStephen Hemminger
While perusing vendor driver, I saw that it did not enable the Vaux power unless device was able to wake from lan for D3cold. This might help for Rene's power issue. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-01sky2: Use 32bit read to read Y2_VAUX_AVAILMike McCormack
B0_CTST is a 24bit register according to the vendor driver (sk98lin). A 16bit read on B0_CTST will always return 0 for Y2_VAUX_AVAIL (1<<16), so use a 32bit read when testing Y2_VAUX_AVAIL Signed-off-by: Mike McCormack <mikem@ring3k.org> Acked-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-01sky2: Create buffer alloc and free helpersMike McCormack
Refactor similar two sections of code that free buffers into one. Only call tx_init if all buffer allocations succeed. Signed-off-by: Mike McCormack <mikem@ring3k.org> Acked-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-01sky2: fix management of driver LEDStephen Hemminger
Observed by Mike McCormack. The LED bit here is just a software controlled value used to turn on one of the LED's on some boards. The register value was wrong, which could have been causing some power control issues. Get rid of problematic define use the correct mask. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-01netdev: convert bulk of drivers to netdev_tx_tStephen Hemminger
In a couple of cases collapse some extra code like: int retval = NETDEV_TX_OK; ... return retval; into return NETDEV_TX_OK; Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-18sky2: version 1.25Stephen Hemminger
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-18sky2: no recyclingStephen Hemminger
Recycling turns out to be a bad idea! For most use cases, the packet can not be reused: TCP packets are cloned. Even for the ideal case of forwarding, it hurts performance because of CPU ping/pong. On a multi-core system forwarding of 64 byte packets is worse much worse: recycling = 24% forwarded vs no recycling = 42% forwarded Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-18sky2: optimize transmit completionStephen Hemminger
Don't reference the list element in hardware transmit ring on transmit completion. The list element is updated by hardware, therefore it causes a cache miss. Do book keeping in software structure. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-18sky2: dynamic size transmit ringStephen Hemminger
Allocate and size transmit ring based on parameters. Saves excess space and allows configuring larger rings for testing. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-18sky2: simplify list element errorStephen Hemminger
The code for list element error (which should only happen on hardware errors) should be cleaner and safer. Gets rid of unused ring_size argument, which makes next patch easier. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-18sky2: transmit ring 64 bit conservationStephen Hemminger
This patch saves elements on transmit ring by only updating the upper 64 bit address when it changes. With many workloads skb's are located in same region, so it saves space. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-18sky2: use upper/lower 32 bitsStephen Hemminger
Use the existing macros to show where DMA address is being broken apart. This is cosmetic only. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-14sky2: remove restarting workaround flagStephen Hemminger
The whole restarting flag was introduced by Mike McCormack and was a temporary duct tape patch around issues with transmits inflight during restart. The problems it was covering are now fixed and the code should have been reverted. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-14sky2: version 1.24Stephen Hemminger
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-14sky2: fix pause negotiationStephen Hemminger
The sky2 driver combines auto speed negotiation with automatic negotiation of pause parameters; but the ethtool interface expects them to be split. This patch allows autonegotiation to be used for speed, but manually disable flow control. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-14sky2: lock less transmit completionStephen Hemminger
Transmit completion can safely run lockless against transmit start. In the normal case, completion is done from NAPI and only looks at elements that are at the tail of the ring. When doing shutdown or reset, the transmiter should be completely block by NAPI disable and blocking of transmit queue. Based on earlier work by Mike McCormack. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-14sky2: cleanup restart operationsStephen Hemminger
This unifies the places that bounce the device (suspend/resume and restart). And makes the operations have the same semantics as normal dev_open/dev_stop. This also avoids setting the multicast addresses twice when device is brought up. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-14sky2: hold RTNL when doing suspend/shutdown operationsStephen Hemminger
The suspend and shutdown code plays with shared state. Use consistent locking, for extra protection. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-14sky2: hold spinlock around phy_power_downStephen Hemminger
Avoid any possible problems with accessing PHY registers on shutdown. This is a purely theoretical issue and is not related to any of the outstanding bug reports. Since receiver and transmitter are already shutdown and phy interrupts for this device are already disabled, there should already be enough protection. Suggested by Mike McCormack. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-14sky2: Reset tx train after interrupts disabled.Mike McCormack
Reseting the tx chain too soon results in invalid tx queue positions being delivered in the status queue. This also makes sure there's no overlap between the cleanup done by sky2_tx_clean() and sky2_tx_done(). Signed-off-by: Mike McCormack <mikem@ring3k.org> Acked-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-14sky2: Move tx reset functionality to sky2_tx_reset()Mike McCormack
This is pure refactoring. Signed-off-by: Mike McCormack <mikem@ring3k.org> Acked-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-14sky2: Avoid rewinding sky2->tx_prodMike McCormack
Keep sky2->tx_prod consistent since int might be examined by an softirq poll or restart. Signed-off-by: Mike McCormack <mikem@ring3k.org> Acked-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-12Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: arch/microblaze/include/asm/socket.h
2009-08-03sky2: Avoid transmits during sky2_down()Mike McCormack
This patch supersedes my previous patch "sky2: Avoid transmitting during sky2_restart". I have reworked the patch to avoid crashes during both sky2_restart() and sky2_set_ringparam(). Without this patch, the sky2 driver can be crashed by doing: # pktgen eth1 & (transmit many packets on eth1) # ethtool -G eth1 tx 510 I am aware you object to storing extra state, but I can't see a way around this. Without remembering that we're restarting, netif_wake_queue() is called in the ISR from sky2_tx_complete(), and netif_tx_lock() is used in sky2_tx_done(). If anybody can see a way around this, please let me know. Signed-off-by: Mike McCormack <mikem@ring3k.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-26sky2: remove unnecessary assignmentMike McCormack
Signed-off-by: Mike McCormack <mikem@ring3k.org> Acked-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-21sky2: Avoid races in sky2_downMike McCormack
Reset rx chain before trying to drain it. Shut interrupts off last, incase there's something to report. Signed-off-by: Mike McCormack <mikem@ring3k.org> Acked-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-16sky2: revert shutdown changesStephen Hemminger
The commit changes to shutdown path broke startup on some systems. revert commit c0bad0f2e4366d5bbfe0c4a7a80bca8f4b05272b Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-26sky2: Fix checksum endiannessAnton Vorontsov
sky2 driver on PowerPC targets floods kernel log with following errors: eth1: hw csum failure. Call Trace: [ef84b8a0] [c00075e4] show_stack+0x50/0x160 (unreliable) [ef84b8d0] [c02fa178] netdev_rx_csum_fault+0x3c/0x5c [ef84b8f0] [c02f6920] __skb_checksum_complete_head+0x7c/0x84 [ef84b900] [c02f693c] __skb_checksum_complete+0x14/0x24 [ef84b910] [c0337e08] tcp_v4_rcv+0x4c8/0x6f8 [ef84b940] [c031a9c8] ip_local_deliver+0x98/0x210 [ef84b960] [c031a788] ip_rcv+0x38c/0x534 [ef84b990] [c0300338] netif_receive_skb+0x260/0x36c [ef84b9c0] [c025de00] sky2_poll+0x5dc/0xcf8 [ef84ba20] [c02fb7fc] net_rx_action+0xc0/0x144 The NIC is Yukon-2 EC chip revision 1. Converting checksum field from le16 to CPU byte order fixes the issue. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-17sky2: version 1.23Stephen Hemminger
Version bump. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-17sky2: add GRO supportStephen Hemminger
Add support for generic receive offload. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-17sky2: skb recyclingStephen Hemminger
This patch implements skb recycling. It reclaims transmitted skb's for use in the receive ring. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-17sky2: reduce default transmit ringStephen Hemminger
Reduce the size of the driver transmit ring to reduce latency and allow qdisc to do better rate control. Also make it obvious what the minimum transmit ring allowed is and why. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-17sky2: receive counter updateStephen Hemminger
Since it is likely that there are multiple packets received per interrupt, only update the receive counters once after all packets are processed. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-17sky2: fix shutdown synchronizationStephen Hemminger
The logic in sky2_down was incorrect. Receiver could report status after rx_stop was called. The steps need to be: * stop new frames from being transmitted * shut off transmit/receive logic * synchronize with NAPI to process status info about transmitter and receiver Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-17sky2: PCI irq issuesStephen Hemminger
Add some read's to avoid any PCI posting issues when controlling irq's. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-17sky2: more receive shutdownStephen Hemminger
Reset more parts of the receive path when device is take offline. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-17sky2: turn off pause during shutdownStephen Hemminger
This unblocks the chip if it is stuck in pause cycle during shutdown. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-16sky2: don't look for VPD sizeStephen Hemminger
The code to compute VPD size didn't handle some systems that use chip without VPD. Also some of the newer chips use some additional registers to store the actual size, and wasn't worth putting the additional complexity in, so just remove the code. No big loss since the code to set the VPD size was only a convenience so that utilities would not read the extra space past the end of the available VPD. Move the first PCI config read earlier to detect bad hardware where it returns all ones and refuse loading driver before furthur damage. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Tested-by: Andy Whitcroft <apw@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-29net: dont update dev->trans_startEric Dumazet
Second round of drivers for Gb cards (and NIU one I forgot in the 10GB round) Now that core network takes care of trans_start updates, dont do it in drivers themselves, if possible. Drivers can avoid one cache miss (on dev->trans_start) in their start_xmit() handler. Exceptions are NETIF_F_LLTX drivers Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-07dma-mapping: replace all DMA_32BIT_MASK macro with DMA_BIT_MASK(32)Yang Hongyang
Replace all DMA_32BIT_MASK macro with DMA_BIT_MASK(32) Signed-off-by: Yang Hongyang<yanghy@cn.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-07dma-mapping: replace all DMA_64BIT_MASK macro with DMA_BIT_MASK(64)Yang Hongyang
Replace all DMA_64BIT_MASK macro with DMA_BIT_MASK(64) Signed-off-by: Yang Hongyang<yanghy@cn.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-02-03sky2: set VPD sizeStephen Hemminger
Read configuration register during probe and use it to size the available VPD. Move existing code using same register slightly earlier in probe handling. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-03sky2: move VPD display into debug interfaceStephen Hemminger
The VPD stuff has more data and isn't generally that useful, so move it into the existing debugfs display and use the new PCI VPD accessor routines. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-03sky2: handle dma mapping errorsStephen Hemminger
On non-x86 platforms it is possible to run out of DMA mapping resources. The driver was ignoring this and could cause corruptions. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-03sky2: remove unneede workaroundStephen Hemminger
This workaround is not needed. It was inherited from sk98lin driver but only applies to an early development version of the chip that is not supported by sky2. The workaround required an unnecessary pci read which hurts performance Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-30sky2: fix hard hang with netconsoling and iface going upAlexey Dobriyan
Printing anything over netconsole before hw is up and running is, of course, not going to work. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Acked-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-20netdev: add more functions to netdevice opsStephen Hemminger
This patch moves neigh_setup and hard_start_xmit into the network device ops structure. For bisection, fix all the previously converted drivers as well. Bonding driver took the biggest hit on this. Added a prefetch of the hard_start_xmit in the fast path to try and reduce any impact this would have. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-19sky2: convert to net_device_opsStephen Hemminger
Convert to new network device ops interface. Slight additional complexity here because the second port does not allow netpoll and therefore has different virtual function table. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-27net: convert print_mac to %pMJohannes Berg
This converts pretty much everything to print_mac. There were a few things that had conflicts which I have just dropped for now, no harm done. I've built an allyesconfig with this and looked at the files that weren't built very carefully, but it's a huge patch. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-13 02:16:28 +0000