aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/tg3.c
AgeCommit message (Collapse)Author
2006-01-03[TG3]: fixup tot_len calculationAlexey Dobriyan
Turning struct iphdr::tot_len into __be16 added sparse warning. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-01-03[INET_SOCK]: Move struct inet_sock & helper functions to net/inet_sock.hArnaldo Carvalho de Melo
To help in reducing the number of include dependencies, several files were touched as they were getting needed headers indirectly for stuff they use. Thanks also to Alan Menegotto for pointing out that net/dccp/proto.c had linux/dccp.h include twice. Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-12-28[TG3]: Update driver version and reldate.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2005-12-28[TG3]: ethtool -d hangs PCIe systemsChris Elmquist
Resubmitting after recommendation to use GET_REG32_1() instead of GET_REG32_LOOP(..., 1). Retested. Problem remains fixed. Prevent tg3_get_regs() from reading reserved and undocumented registers at RX_CPU_BASE and TX_CPU_BASE offsets which caused hostile behavior on PCIe platforms. Acked-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-12-19[TG3]: Fix ethtool memory testMichael Chan
Skip the memory 0xb50 to 0x1000 during "ethtool -t" memory test. Overwriting memory in this region can cause ASF problems. Update version and release date. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-12-19[TG3]: Add tw32_wait_f() for some sensitive registersMichael Chan
The tw32_f() function (register write with immediate read flush) can hang when used on some registers to switch clock frequencies and power. A new tw32_wait_f() is added for such registers with the delay before the read and after the read. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-12-19[TG3]: Some low power fixesMichael Chan
Add some missing workarounds in tg3_set_power_state(): 1. Workaround to prevent overdrawing current on 5714. 2. Do not power down 5700's PHY because of hw limitation. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-12-19[TG3]: Fix peer device handlingMichael Chan
Locate the pdev_peer for dual port 5714 NIC devices in addition to 5704 devices. The name is also changed to tg3_find_peer() from tg3_find_5704_peer(). It is also necessary to call netdev_priv() to get to the peer's private tg3 structure. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-12-13[TG3]: Fix low power stateMichael Chan
Fix the following bugs in tg3_set_power_state(): 1. Both WOL and ASF flags require switching to aux power. 2. Add a missing handshake with firmware to enable WOL. 3. Turn off the PHY if both WOL and ASF are disabled. 4. Add nvram arbitration before halting the firmware. 5. Fix tg3_setup_copper_phy() to switch to 100Mbps when changing to low power state. Update revision and date. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-12-13[TG3]: Fix 5704 single-port modeMichael Chan
If the dual-port 5704 is configured as a single-port device with only one PCI function, it would trigger a BUG() condition in tg3_find_5704_peer(). This fixes the problem by returning its own pdev if the peer cannot be found. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-12-13[TG3]: Fix suspend and resumeMichael Chan
Fix tg3_suspend() and tg3_resume() by clearing and setting the TG3_FLAG_INIT_COMPLETE flag when appropriate. tg3_set_power_state() looks at TG3_FLAG_INIT_COMPLETE on the peer device to determine when to appropriately switch to aux power. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-12-13[TG3]: Fix nvram arbitration bugs.Michael Chan
The nvram arbitration rules were not strictly followed in a few places and this could lead to reading corrupted values from the nvram. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-12-06[TG3]: remove warning on raceStephen Hemminger
[ Move assosciated code comment to the correct spot, and update driver version and release date -DaveM ] Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-10-29[PATCH] drivers/net/tg3: Use the DMA_{32,64}BIT_MASK constantsTobias Klauser
This one from my DMA_{32,64}BIT_MASK series did not seem to make it through to upstream. Use the DMA_{32,64}BIT_MASK constants from dma-mapping.h when calling pci_set_dma_mask() or pci_set_consistent_dma_mask() This patch includes dma-mapping.h explicitly because it caused errors on some architectures otherwise. See http://marc.theaimsgroup.com/?t=108001993000001&r=1&w=2 for details Signed-off-by: Tobias Klauser <tklauser@nuerscht.ch> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-10-28drivers/net: Remove pointless checks for NULL prior to calling kfree()Jesper Juhl
2005-10-28[PATCH] tg3: update version and minor fixesMichael Chan
Update version and reldate and add more sanity checking to tg3_set_settings(). Signed-off-by: Gary Zambrano <zambrano@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-10-28[PATCH] tg3: fix ASF heartbeatMichael Chan
Change the ASF heart beat to 5 seconds for faster detection of system crash. The driver sends the heartbeat every 2 seconds and the ASF firmware will timeout and reset the device if no heartbeat is received after 5 seconds. The old scheme of 2 minutes is ineffective. tg3_write_mem_fast() is added to speed up the IO to send the heartbeat. When no workaround is needed, it will use direct MMIO to memory space to write to memory. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-10-28[PATCH] tg3: add 5714/5715 supportMichael Chan
Add complete support for 5714/5715. These chips are very similar to 5780 so the changes are very trivial. A TG3_FLG2_5780_CLASS flag is added to identify these chips. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-10-03[TG3]: Update driver version and release date.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2005-10-03[TG3]: Refine AMD K8 write-reorder chipset test.Michael Chan
Test for VIA K8T800 north bridge instead of AMD K8 HyperTransport bridge based on new information from Andi Kleen. The AMD HyperTransport interface is not responsible for PCI transactions and so the re-ordering is more likely done by the VIA north bridge. This code is subject to change if we get more information from AMD or VIA. PCI Express devices are excluded from doing the read flush since all chipsets in the write_reorder list are PCI chipsets. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-09-27[TG3]: Update driver version and release date.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2005-09-27[TG3]: misc. fixesMichael Chan
Fix interrupt test handler by adding check for IRQ assertion in PCI_STATE register in addition to the status block updated bit. Add test for valid ethernet address in tg3_set_mac_addr(). Add tg3_bus_string() to setup the PCI bus speed/width string for all PCI/PCIX/PCI Express devices. This is used to print the bus type during init_one(). Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-09-27[TG3]: 5780 PHY fixesMichael Chan
Fix 5780 PHY related problems: 1. MAC_RX_MODE reset must be done before setting up the MAC_MODE register on 5705_PLUS chips or the chip will stop receiving after a while. The MAC_RX_MODE reset is needed to prevent intermittently losing the first receive packet on serdes chips. 2. Skip MAC loopback test on 5780 because of hardware errata. Normal traffic including PHY loopback is not affected by the errata. 3. PHY loopback fails intermittently on 5708S and this is fixed by putting the PHY in loopback mode first before programming the MAC mode register. A MAC_RX_MODE reset is also added. 4. Return -EINVAL in tg3_nway_reset() if device is in TBI mode. Allow nway_reset if 5780S is in parallel detect mode. 5. Add missing PHY IDs in KNOWN_PHY_ID() macro. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-09-17[TG3]: Fix 4GB boundary tx handlingMichael Chan
Fix and simplify the workaround code for the 4GB boundary tx buffer hardware bug. 1. Need to unmap the original SKB's dma addresses if a new SKB cannot be allocated. 2. Need to pass the base flag to tigon3_4gb_hwbug_workaround() or TSO won't work properly. 3. The guilty entry and length parameters for tigon3_4gb_hwbug_workaround() are removed as they are not necessary. 4. Remove assumption that only one fragment can hit the 4GB boundary. Another fragment can hit 8GB for example. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-09-16[TG3]: Sparse fixes for tg3Peter Hagervall
Change 0 to NULL where appropriate. Signed-off-by: Peter Hagervall <hager@cs.umu.se> Acked-by: Jeff Garzik <jgarzik@pobox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-09-16[TG3]: Add AMD K8 to list of write-reorder chipsets.David S. Miller
Thanks to Andy Stewart for the report and testing debug patches from Michael Chan. Signed-off-by: David S. Miller <davem@davemloft.net>
2005-09-12[TG3]: Add support for ETHTOOL_GPERMADDR.John W. Linville
Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-09-12[TG3]: Do not count non-error frames dropped by the hardware as rx_errors.John W. Linville
Instead, count them as part of rx_missed_errors. Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-09-05[TG3]: Update driver version and release date.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2005-09-05[TG3]: Use status tag to check for new eventsMichael Chan
Use the status tag to determine if there are new events in tg3_interrupt_tagged(). We discussed about this a while ago with Grant Grundler and DaveM. This scheme makes it unnecessary to clear the updated bit in the status block when using tagged mode, and only a simple comparison is needed to determine if there are new events. The tp->lock around netif_rx_complete() and tg3_restart_ints() is also removed. It is unnecessary with DaveM's new locking scheme. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-09-05[TG3]: Remove status block access in tg3_msi() and add prefetchesMichael Chan
Remove unnecessary status block accesses in tg3_msi(). Since MSI is not shared, it is unnecessary to read the status block to determine if there are any new events in the MSI handler. It is also unnecessary to clear the updated bit in the status block. Since the poll list is per-cpu, tg3_poll() will be scheduled to run on the same CPU that received the MSI. Prefetches for the status block and the next rx descriptors are added in tg3_msi() to improve their access times when tg3_poll() runs. In the non-MSI irq handlers, we need to check the status block because interrupts may be shared. Only prefetches for the next rx descriptors are added. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-09-05[TG3]: Add PHY loopback testMichael Chan
Improve ethtool loopback self test by adding PHY loopback to the existing MAC loopback test. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-09-05[TG3]: Add ethtool -p supportMichael Chan
Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-09-05[TG3]: Minor 5780 and 5752 fixesMichael Chan
Minor SerDes bug fixes for 5780S and nvram bug fixes for 5780 and 5752. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-09-01[TG3]: Update driver version and release date.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2005-09-01[TG3]: Minimize locking in TX path.Michael Chan
This is similar to Eric Dumazet's tx_lock patch for tg3 but takes it one step further to eliminate the tx_lock in the tx_completion path when the tx queue is not stopped. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-08-29[TG3]: Fix bug in setting a tg3_flagMichael Chan
Found a bug while reviewing the patches the second time. The TG3_FLAG_TXD_MBOX_HWBUG flag is set after the register access methods have been determined. This patch fixes it by moving it up before the various access methods are assigned. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-08-29[TG3]: Eliminate one register write in tg3_restart_ints()Michael Chan
The register write to register 0x68 to restart interrupts is unnecessary as the interrupt wasn't masked in that register by the irq handler. This will save one register write in the fast path. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-08-29[TG3]: Add indirect register method for 5703 behind ICHMichael Chan
This patch adds the new workaround for 5703 A1/A2 if it is behind certain ICH bridges. The workaround disables memory and uses config. cycles only to access all registers. The 5702/03 chips can mistakenly decode the special cycles from the ICH chipsets as memory write cycles, causing corruption of register and memory space. Only certain ICH bridges will drive special cycles with non-zero data during the address phase which can fall within the 5703's address range. This is not an ICH bug as the PCI spec allows non-zero address during special cycles. However, only these ICH bridges are known to drive non-zero addresses during special cycles. The indirect_lock is also changed to spin_lock_irqsave from spin_lock_bh because it is used in irq handler when using the indirect method to disable interrupts. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-08-29[TG3]: Add mailbox read methodMichael Chan
This patch adds the mailbox read method and also adds an inline function tw32_mailbox_f() for mailbox writes that require read flush. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-08-29[TG3]: Add various register methodsMichael Chan
This patch adds various dedicated register read/write methods for the existing workarounds, including PCIX target workaround, write with read flush, etc. The chips that require these workarounds will use these dedicated access functions. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-08-29[TG3]: Add basic register access function pointersMichael Chan
This patch adds the basic function pointers to do register accesses in the fast path. This was suggested by David Miller. The idea is that various register access methods for different hardware errata can easily be implemented with these function pointers and performance will not be degraded on chips that use normal register access methods. The various register read write macros (e.g. tw32, tr32, tw32_mailbox) are redefined to call the function pointers. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-08-25[TG3]: Fix ethtool loopback test lockupMichael Chan
The tg3_abort_hw() call in tg3_test_loopback() is causing lockups on some devices. tg3_abort_hw() disables the memory arbiter, causing tg3_reset_hw() to hang when it tries to write the pre-reset signature. tg3_abort_hw() should only be called after the pre-reset signature has been written. This is all done in tg3_reset_hw() so the tg3_abort_hw() call is unnecessary and can be removed. [ Also bump driver version and release date. -DaveM ] Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-08-19[TG3]: Update driver version and reldate.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2005-08-19[TG3]: Fix SerDes detectionMichael Chan
A problem was reported by Grant Grundler on an HP rx8620 using IOX Core LAN partno(A7109-6) 5701 copper NIC. The tg3 driver mistakenly detects this NIC as having a SerDes PHY and link does not come up as a result. The problem was caused by an incorrectly programmed eeprom that set the NIC_SRAM_DATA_CFG_PHY_TYPE_FIBER bit in the NIC_SRAM_DATA_CFG location. This patch will override the NIC_SRAM_DATA_CFG_PHY_TYPE_FIBER bit if a valid PHY ID is read from the MII registers on older 570x chips where the MII interface is not used on SerDes chips. On newer chips such as the 5780 that use MII for both copper and SerDes, SerDes detection must rely on the eeprom. This patch will make the SerDes detection identical to versions 3.25 and older. Signed-off-by: Michael Chan <mchan@broadcom.com> Acked-by: Grant Grundler <iod00d@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-08-06[TG3]: Save initial PCI state before registering the netdevice.David S. Miller
Else on SMP systems it is possible for hotplug to execute, invoke tg3_open(), and end up loading the uninitialized PCI register save area into the card. Signed-off-by: David S. Miller <davem@davemloft.net>
2005-07-25[TG3]: Update driver version and reldate.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2005-07-25[TG3]: add 5780 fiber supportMichael Chan
Add 5780S support by adding a new tg3_setup_fiber_mii_phy() function and a timer function for parallel link detection. 5780S uses standard MII registers for 1000BaseX and runs in GMII mode as opposed to TBI mode on older serdes chips. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-07-25[TG3]: disallow jumbo TSO on 5780Michael Chan
Disallow jumbo TSO on 5780 due to hardware restrictions. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-07-25[TG3]: consolidate all DMA water mark settingsMichael Chan
Consolidate all DMA watermark settings for standard and jumbo frames on all chips in tg3_init_bufmgr_config() and add new settings for 5780. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>